user's manual hypack max - spatialtech.com.t0).pdf · registration page the following...

User's Manual

HYPACKMAX HYPACK, Inc. 56 Bradley St.

Middletown, CT 06457

Phone (860) 635-1500 Technical Support: [email protected] Fax: (860) 635-1522 Web Address: www.hypack.com

Registration Page The following information is required in order to register your HYPACK® MAX with HYPACK®, Inc. Registering your package enables us to send you software upgrades and to report bugs that have been found in the programs. Please fill in the following information and fax it to HYPACK®, Inc at (860) 635-1522 or email the same information to [email protected]. Package: Hypack® Max

Hypack® Max Lite Hypack® Max Survey Hypack® Max Office Dredgepack®

Platform: Windows 2000 Windows XP

License Holder: Company Name: Billing Address: Phone: Fax: Email: Date Purchased: Purchased From: Key Number: FOR SHIPPING OF FUTURE UPDATES: The Maintenance Plan entitles you to all program updates during that period. Whereas the billing address is often different than where the product is actually being used, please provide instructions below as to where new release CDs should be sent. Contact Person: Address: Phone:

HYPACK® MAX Manual 1/05 • i

Contents

1. INTRODUCTION .................................... 1-1

I. Welcome to HYPACK® MAX............................................................................................ 1-1 II. HYPACK® MAX Minimum System Requirements .................................................... 1-2 III. Network System Requirements ...................................................................................... 1-3 IV. Installation........................................................................................................................ 1-4 V. HYPACK® MAX Interface ................................................................................................ 1-4

A. HYPACK® MAX Files List.............................................................................................. 1-6 B. HYPACK® MAX Screen Control Bar.............................................................................. 1-7 C. HYPACK® MAX Area Map Settings............................................................................... 1-7 D. Language Selection.......................................................................................................... 1-20

VI. Projects in HYPACK® MAX ....................................................................................... 1-20 A. Managing Projects ........................................................................................................... 1-21 B. Loading and Unloading Files to your Project .................................................................. 1-27

VII. HYPACK® MAX Data Files ........................................................................................ 1-28 A. Raw Data Files................................................................................................................. 1-28 B. Edited Data Files.............................................................................................................. 1-28 C. Sorted Data Files.............................................................................................................. 1-29 D. Catalog Files (*.LOG) ..................................................................................................... 1-29

VIII. HYPACK® MAX Project Files ................................................................................ 1-32 A. Advanced Channel Design Files (*.CHN)....................................................................... 1-32 B. Background Files ............................................................................................................. 1-32 C. Border files (*.BRD)........................................................................................................ 1-37 D. Channel Plan Files (*.PLN) ............................................................................................. 1-38 E. Kinematic Tidal Datum Files (*.KTD)............................................................................ 1-38 F. Matrix Files (*.MTX ) ..................................................................................................... 1-38 G. Planned Line Files (*.LNW)............................................................................................ 1-39 H. Plotting Sheet Files (*.PLT) ............................................................................................ 1-39 I. Sound Velocity Files (*.VEL) ......................................................................................... 1-39 J. Target Files (*.TGT)........................................................................................................ 1-40 K. Template Files (*.TPL or *.TMP) ................................................................................... 1-40 L. Tide Files (*.TID) ............................................................................................................ 1-40

IX. Preparing for your Survey ............................................................................................ 1-41 A. Channel Design................................................................................................................ 1-41 B. Editor Programs ............................................................................................................... 1-41 C. Geodetic Parameters Program.......................................................................................... 1-42 D. Hardware Programs ......................................................................................................... 1-42 E. Transducer Offsets ........................................................................................................... 1-42 F. Calibration Programs ....................................................................................................... 1-42 G. Scheme Builder................................................................................................................ 1-43

ii HYPACK® MAX Manual 1/05

X. Collecting your Data .......................................................................................................... 1-43 XI. Processing your Data ..................................................................................................... 1-44

A. Single Beam Max............................................................................................................. 1-44 B. Multibeam Max................................................................................................................ 1-44 C. Sounding Selection .......................................................................................................... 1-44 D. Tide Corrections............................................................................................................... 1-45 E. Sound Velocity Corrections............................................................................................. 1-45 F. Hyscan.............................................................................................................................. 1-45

XII. Creating your Final Reports ......................................................................................... 1-46 A. Cross Sections & Volumes .............................................................................................. 1-46 B. Exporting to Other Formats ............................................................................................. 1-46 C. Plotting Survey Data ........................................................................................................ 1-46 D. TIN Model ....................................................................................................................... 1-46

XIII. Utility Programs......................................................................................................... 1-46 A. Advanced Channel Design............................................................................................... 1-46 B. Digitizing Programs ......................................................................................................... 1-46 C. File Work Programs......................................................................................................... 1-47 D. Geodesy Programs ........................................................................................................... 1-47 E. ADCP Processing Programs ............................................................................................ 1-47 F. Other Utility Programs..................................................................................................... 1-48

XIV. External Programs..................................................................................................... 1-48

2. PREPARATION........................................ 2-1

I. Loading Background Files (Charts) to the Project........................................................... 2-1 A. Loading ARCS Charts to HYPACK® MAX .................................................................... 2-1 B. Loading VPF Charts to the Project .................................................................................... 2-5 C. Loading C-Maps to the Project .......................................................................................... 2-6 D. Displaying SHP Charts .................................................................................................... 2-11

II. Geodesy ........................................................................................................................... 2-12 A. Geodetic Parameters Program.......................................................................................... 2-12 B. Geodesy Utility Programs................................................................................................ 2-25

III. Planned Survey Lines .................................................................................................... 2-38 A. Spacing Planned Lines..................................................................................................... 2-40 B. Offset Patterns for Planned Lines .................................................................................... 2-40 C. Creating Planned Lines in the Line Editor....................................................................... 2-41 D. Creating Curved Lines with the Line Editor.................................................................... 2-55 E. Importing *.LIN and *.N83 Files to the Line Editor ....................................................... 2-56 F. Clipping Planned Lines to the Survey Area..................................................................... 2-57 G. Creating Planned Lines in Channel Design Max............................................................. 2-61 H. Creating a Planned Line File from a DXF File................................................................ 2-76

IV. Hardware Setup in HYPACK....................................................................................... 2-78 A. Specifying Devices in HYPACK Hardware .................................................................... 2-80 B. Device Setup in HYPACK Hardware.............................................................................. 2-80 C. Driver Setup in HYPACK Hardware............................................................................... 2-83

HYPACK® MAX Manual 1/05 • iii

D. Record Basis in HYPACK Hardware .............................................................................. 2-84 E. Connection Information in HYPACK Hardware............................................................. 2-85 F. Measuring Offsets in HYPACK Hardware...................................................................... 2-90 G. Station Information in HYPACK Hardware.................................................................... 2-94 H. Script Button in HYPACK Hardware.............................................................................. 2-96 I. Disabling Devices in the HYPACK Hardware Setup...................................................... 2-96 J. Saving your Hardware Setup in HYPACK Hardware..................................................... 2-96 K. Editing Device Settings in HYPACK Hardware ............................................................. 2-97

V. Hardware Notes ................................................................................................................. 2-97 A. GPS Positioning Equipment ............................................................................................ 2-97 B. Echosounders ................................................................................................................. 2-110 C. Helmsman Displays and Event Taps ............................................................................. 2-115 D. Parallel Event Boxes ...................................................................................................... 2-121 E. Motion Sensors .............................................................................................................. 2-123 F. Telemetry Tide Gauges.................................................................................................. 2-124 G. Gyros.............................................................................................................................. 2-125 H. Towfish/ROV’s/Multiple Vessels.................................................................................. 2-126 I. Example of a Typical HYPACK Hardware Setup......................................................... 2-136 J. HYSWEEP® Hardware Setup in HYPACK ................................................................. 2-141

VI. Calibrating your System.............................................................................................. 2-141 A. Latency Test................................................................................................................... 2-141 B. Correcting Latency Time in the Hardware Program...................................................... 2-144 C. Correcting Latency Errors to Survey Data..................................................................... 2-144

VII. Target Files (*.TGT).................................................................................................... 2-146 A. Creating a New Target File............................................................................................ 2-146 B. Editing an Existing Target File ...................................................................................... 2-147 C. Inserting a Target ........................................................................................................... 2-147 D. Deleting a Target............................................................................................................ 2-148 E. Appending Target Files.................................................................................................. 2-148

VIII. Plotting Sheets (*.PLT)............................................................................................ 2-148 A. Creating a Plotting File in the Plotting Sheet Editor...................................................... 2-148 B. Positioning the Plotting Sheet File with the Cursor in the Plotting Sheet Editor .......... 2-149 C. Positioning the Plotting File in the Plotting Sheet Editor in the Plotting Sheet Editor . 2-149 D. Example of Creating a Plotting Sheet in the Plotting Sheet Editor ............................... 2-150 E. Editing an Existing Plotting Sheet File in the Plotting Sheet Editor ............................. 2-151

IX. Matrix Files (*MTX).................................................................................................... 2-151 A. Creating a Matrix File with the Matrix Editor ............................................................... 2-152 B. Positioning the Matrix File with the Cursor .................................................................. 2-153 C. Positioning the Matrix File in the Matrix Editor ........................................................... 2-153 D. Example of Creating a Matrix File ................................................................................ 2-153 E. Creating a Filled Matrix File in the XYZ to Matrix Program........................................ 2-154 F. Editing an Existing Matrix File...................................................................................... 2-156 G. Matrix File View Options in Hypack Max .................................................................... 2-156

iv HYPACK® MAX Manual 1/05

3. SURVEY .................................................... 3-1

I. Overview ............................................................................................................................... 3-1 II. Survey Preparation.......................................................................................................... 3-1 III. Starting the Survey Program.......................................................................................... 3-2 IV. Navigation Parameters .................................................................................................... 3-3 V. Project Information ............................................................................................................. 3-5 VI. Raw Survey Files.............................................................................................................. 3-6

A. Survey File Naming Convention ....................................................................................... 3-6 B. Data Directories for Raw Survey Files .............................................................................. 3-7 C. Catalog Files for Raw Survey Files ................................................................................... 3-7

VII. Scheme Builder................................................................................................................. 3-7 A. Creating Display Schemes for Survey ............................................................................... 3-8 B. Color Settings in Scheme Builder...................................................................................... 3-9 C. Matrix Sounding Colors in Scheme Builder .................................................................... 3-10 D. Text Settings in Scheme Builder...................................................................................... 3-11 E. C-Map and S-57 Chart Settings in Scheme Builder ........................................................ 3-11 F. Windows Settings in Scheme Builder.............................................................................. 3-12

VIII. Windows in Survey .................................................................................................... 3-12 A. Area Map in Survey......................................................................................................... 3-13 B. Left-Right Indicator in Survey......................................................................................... 3-16 C. Data Display Window in Survey ..................................................................................... 3-17 D. Profile Window in Survey ............................................................................................... 3-19 E. Device Windows in Survey ............................................................................................. 3-23 F. Alarms in Survey ............................................................................................................. 3-23 G. Helmsman Display in Survey .......................................................................................... 3-24 H. Broadcasting Survey Windows over the Network to the Window Viewer ..................... 3-24

IX. Boat Features in Survey ................................................................................................ 3-26 A. Boat Track Parameters ..................................................................................................... 3-27 B. Boat Shapes and Symbols................................................................................................ 3-27 C. Labeling your Vessels in Survey ..................................................................................... 3-28 D. Specifying the Main Vessel in Survey............................................................................. 3-29 E. Displaying Boat Profile Windows ................................................................................... 3-29 F. Anchors in Survey............................................................................................................ 3-29

X. Chart (Background) Files.................................................................................................. 3-30 A. Chart Types Supported in Survey.................................................................................... 3-31 B. Loading Charts During Survey ........................................................................................ 3-31 C. Unloading Charts During Survey..................................................................................... 3-32

XI. Targets in Survey ........................................................................................................... 3-32 A. Marking Targets in Survey .............................................................................................. 3-33 B. Selecting Targets in Survey ............................................................................................. 3-34 C. Erasing and Restoring Targets in Survey......................................................................... 3-34 D. Target Properties in Survey ............................................................................................. 3-34

HYPACK® MAX Manual 1/05 • v

E. Target Display Defaults in Survey................................................................................... 3-36 F. Loading a Manually Prepared Target File in Survey....................................................... 3-37 G. Water's Edge Targets ....................................................................................................... 3-38 H. Connecting Targets with Survey Lines............................................................................ 3-39 I. Connecting Targets to the Boat Position in Survey......................................................... 3-39

XII. Matrix Files in Survey ................................................................................................... 3-39 A. Loading and Unloading Matrix Files in Survey .............................................................. 3-40 B. Multiple Matrix Files in Survey....................................................................................... 3-40 C. Saving Soundings to a Matrix in Survey ......................................................................... 3-40 D. Matrix Color Settings in Survey ...................................................................................... 3-44 E. Saving Matrix Files in Survey ......................................................................................... 3-45

XIII. Tide Corrections in Survey ....................................................................................... 3-45 A. Telemetry Tide Gauges in Survey ................................................................................... 3-46 B. Manual Entry of Tide Corrections in Survey................................................................... 3-46 C. Predicted Tide Corrections in Survey.............................................................................. 3-47 D. RTK GPS Tide Corrections in Survey............................................................................. 3-47

XIV. Draft/Squat Corrections............................................................................................ 3-47 A. Manual Draft/Squat Corrections ...................................................................................... 3-48 B. Automatic Draft/Squat Corrections ................................................................................. 3-48

XV. Shared Memory Programs............................................................................................ 3-49 A. Memory Viewer ............................................................................................................... 3-49 B. Shared Memory Output Program..................................................................................... 3-50 C. Echosounder Display ....................................................................................................... 3-54 D. NMEA Output.................................................................................................................. 3-55 E. Odometer.......................................................................................................................... 3-56 F. Graphical Motion Reference Unit.................................................................................... 3-57 G. Heading and Speed Indicator ........................................................................................... 3-57

XVI. Logging Data in Survey ............................................................................................. 3-58 A. Navigating Planned Lines in Survey................................................................................ 3-58 B. Logging Events in Survey................................................................................................ 3-62

XVII. Plotting in Survey....................................................................................................... 3-63 XVIII. Printing Survey Data ................................................................................................. 3-65

4. SINGLE BEAM PROCESSING ............. 4-1

I. Previewing Your Soundings in the Main Window............................................................ 4-1 II. Compress Project ............................................................................................................. 4-2 III. Single Beam Post-processing Sequence Guides............................................................. 4-3 IV. Sound Velocity Corrections Program ............................................................................ 4-4

A. Creating a Sound Velocity File.......................................................................................... 4-4 B. Importing Sound Velocity Data ......................................................................................... 4-5

V. Single Beam Max.................................................................................................................. 4-7 A. Single Beam Max Procedure ............................................................................................. 4-7 B. Selecting Sounding Files in Single Beam Max.................................................................. 4-9

vi HYPACK® MAX Manual 1/05

C. Corrections in Single Beam Max..................................................................................... 4-10 D. Merging Corrections in Single Beam Max ...................................................................... 4-13 E. Read Parameters in Single Beam Max............................................................................. 4-14 F. Merging Digitized Depth Data with Raw Survey Data in Single Beam Max ................. 4-20 G. Windows in Single Beam Max ........................................................................................ 4-21 H. Display Settings in Single Beam Max ............................................................................. 4-27 I. Search and Filter Options in Single Beam Max............................................................... 4-30 J. Single Beam Max Statistics ............................................................................................. 4-31 K. Editing Data in Single Beam Max ................................................................................... 4-32 L. Saving Edited Single Beam Data..................................................................................... 4-35 M. Exporting Edited Single Beam Data to a Text File...................................................... 4-35

VI. Clipping Survey Files..................................................................................................... 4-36 VII. Sounding Selection Programs for Single Beam Surveys ............................................ 4-37

A. Comparison of Sounding Selection Methods for Single Beam Data............................... 4-37 B. Sort Program .................................................................................................................... 4-38 C. Cross Sort Program .......................................................................................................... 4-40 D. Mapper Program .............................................................................................................. 4-42

5. SIDE SCAN ............................................... 5-1

I. Side Scan Hardware ............................................................................................................ 5-1 A. Specifying Devices in Side Scan Hardware....................................................................... 5-1 B. Driver Setup in Side Scan Hardware ................................................................................. 5-2 C. Connection Information in Side Scan Hardware ............................................................... 5-2 D. Offsets in Side Scan Hardware .......................................................................................... 5-5 E. Editing Device Settings in Side Scan Hardware................................................................ 5-6

II. Side Scan Survey .............................................................................................................. 5-6 A. Side Scan Survey Windows............................................................................................... 5-7 B. View Options in Side Scan Survey.................................................................................. 5-11 C. Logging Data in Side Scan Survey .................................................................................. 5-15 D. Side Scan Playback .......................................................................................................... 5-18

III. Side Scan Processing...................................................................................................... 5-19 A. Running Hyscan............................................................................................................... 5-20 B. Loading Data to Hyscan................................................................................................... 5-21 C. Scan View ........................................................................................................................ 5-22 D. Creating Geo-referenced TIF Files in Mosaic View........................................................ 5-30

6. FINAL PRODUCTS ................................. 6-1

I. Hyplot Max........................................................................................................................... 6-1 A. Running Hyplot Max ......................................................................................................... 6-1 B. Setting Display Options in Hyplot Max............................................................................. 6-2 C. Plotting Methods in Hyplot Max ..................................................................................... 6-20 D. Exporting your Plotting Sheet to DXF Format ................................................................ 6-20

II. Cross Sections and Volumes ......................................................................................... 6-24 A. Running Cross Sections and Volumes............................................................................. 6-24

HYPACK® MAX Manual 1/05 • vii

B. Surveys Tab in Cross Sections and Volumes .................................................................. 6-24 C. Graph Options Tab in Cross Sections and Volumes........................................................ 6-31 D. View Tab in Cross Sections and Volumes....................................................................... 6-36 E. Print Tab in Cross Sections and Volumes........................................................................ 6-37 F. Volumes Tab in Cross Sections and Volumes................................................................. 6-38 G. Cross Section-based Volumes Calculation Methods ....................................................... 6-39 H. Examples in Cross Sections and Volumes....................................................................... 6-53 I. Computing Reach Volumes Using the Channel Plan Feature ......................................... 6-63

III. Surface Modeling in the TIN Model Program ............................................................ 6-67 A. Creating a TIN Model ...................................................................................................... 6-67 B. Initial Data Dialog in TIN Modeling ............................................................................... 6-68 C. TIN Model Display Settings ............................................................................................ 6-71 D. Measuring Distance and Position in 2D TIN Models...................................................... 6-78 E. Cutting Sections through a TIN Model............................................................................ 6-78 F. Example of Cutting Sections through a TIN Model ........................................................ 6-79 G. Clipping your TIN Model using a Border File ................................................................ 6-82 H. Break Lines in TIN Models ............................................................................................. 6-84 I. Exporting Data from TIN Models.................................................................................... 6-85 J. Volumes Based on Surface Calculations ......................................................................... 6-94 K. Examples of Volumes Based on Surface Calculations .................................................... 6-99

IV. Export............................................................................................................................ 6-104 A. Running the Export Program ......................................................................................... 6-105 B. Export Options in Export ............................................................................................... 6-107 C. Example: Exporting to DGN/DXF in EXPORT............................................................ 6-115

7. UTILITIES ................................................ 7-1

I. Tide (Water Level) Corrections.......................................................................................... 7-1 A. Harmonic Tidal Predictions ............................................................................................... 7-2 B. Tide Corrections from High-Low Water Times and Heights ............................................ 7-5 C. Tide Corrections with Manual Observations ..................................................................... 7-6 D. Importing NOAA Tide Data to Manual Tides Program .................................................... 7-8 E. Editing Tide Files in the Manual Tides Program............................................................... 7-9 F. Real Time Kinematic (RTK) Tide Corrections ................................................................. 7-9

II. Boat Shape Editor .......................................................................................................... 7-17 A. Creating a Boat Shape...................................................................................................... 7-18 B. Importing your Boat Shape.............................................................................................. 7-19

III. 3D Shape Editor ............................................................................................................. 7-19 A. 3D Shape Editor Interface................................................................................................ 7-20 B. Adjusting the View in 3D Shape Editor .......................................................................... 7-21 C. Running the 3D Shape Editor .......................................................................................... 7-23 D. Opening Custom Shape Files in the 3D Shape Editor ..................................................... 7-24 E. Animating Dredge Template Files in the 3D Shape Editor ............................................. 7-26 F. Creating Basic Objects in the 3D Shape Editor ............................................................... 7-26 G. Creating Advanced Objects in the 3D Shape Editor........................................................ 7-26 H. Creating Vessel Origin and Attachment Points ............................................................... 7-30

viii HYPACK® MAX Manual 1/05

I. Removing Objects from the Custom Shape..................................................................... 7-31 J. Setting Object Properties in the 3D Shape Editor............................................................ 7-31 K. Replicating Objects in your Custom Shape ..................................................................... 7-41 L. Grouping Objects in your Custom Shape ........................................................................ 7-41 M. Saving your Custom 3D Shape File............................................................................. 7-44

IV. Advanced Channel Design ............................................................................................ 7-46 A. Running Advanced Channel Design................................................................................ 7-46 B. Creating (or Editing) your Channel File in Advanced Channel Design .......................... 7-46 C. Importing Channel Template Information to Advanced Channel Design ....................... 7-51 D. Viewing your Channel in Advanced Channel Design ..................................................... 7-54 E. Exporting Channel files in XYZ Format ......................................................................... 7-55 F. Examples in Advanced Channel Design.......................................................................... 7-56

V. Chart Program................................................................................................................... 7-60 A. Running the Chart Program ............................................................................................. 7-61 B. Registering your Chart ..................................................................................................... 7-61 C. Digitizing your Chart Features......................................................................................... 7-61 D. Editing Chart Features in the Chart Program................................................................... 7-64

VI. Echogram Program ....................................................................................................... 7-64 VII. Shore Manual ................................................................................................................. 7-65

A. Creating a *.DIG File in Shore Manual ........................................................................... 7-66 B. Editing your Object List in Shore Manual ....................................................................... 7-66 C. Printing your Object List ................................................................................................. 7-67

VIII. DGW Editor ............................................................................................................... 7-67 IX. XYZ Collector ................................................................................................................ 7-68 X. Sounding Adjustment ........................................................................................................ 7-69 XI. Data Adjustments Program .......................................................................................... 7-70

A. Running Data Adjustments .............................................................................................. 7-70 B. Data Adjustment Items .................................................................................................... 7-71

XII. Manual Entry Program................................................................................................. 7-72 XIII. Metadata ..................................................................................................................... 7-73

A. Creating Metadata............................................................................................................ 7-74 B. Navigation through Metadata projects/files..................................................................... 7-75 C. Metadata Symbols............................................................................................................ 7-75 D. Entering Data in your Metadata Report ........................................................................... 7-76 E. Building the *.MET file and Saving the *.GEN file........................................................ 7-78 F. Saving a Metadata project................................................................................................ 7-78

XIV. Metric File Converter Program................................................................................ 7-79 XV. Remap ............................................................................................................................. 7-79 XVI. Pathfinder Program................................................................................................... 7-82 XVII. Merge XYZ................................................................................................................. 7-83 XVIII. ADCP Logger ............................................................................................................. 7-84

A. ADCP LOGGER Procedure ............................................................................................ 7-85

HYPACK® MAX Manual 1/05 • ix

B. Connecting your ADCP Device....................................................................................... 7-86 C. Testing the ADCP Connection......................................................................................... 7-86 D. Opening the Plan File in the ADCP Logger .................................................................... 7-87 E. Deploying the Plan file in ADCP LOGGER ................................................................... 7-87 F. Logging ADCP Data........................................................................................................ 7-88 G. Windows in ADCP LOGGER ......................................................................................... 7-88 H. ADCP LOGGER View Options ...................................................................................... 7-96

XIX. ADCP Profile.............................................................................................................. 7-99 A. ADCP Profile Procedure.................................................................................................. 7-99 B. Surveys Tab in the ADCP Profile Program ................................................................... 7-100 C. Graph Options Tab in the ADCP Profile Program ........................................................ 7-100 D. View Tab in the ADCP Profile Program ....................................................................... 7-103 E. Print tab in the ADCP Profile program.......................................................................... 7-106 F. Discharge Report Tab in the ADCP Profile Program.................................................... 7-108

XX. ADCP to DXF............................................................................................................... 7-109 XXI. Hardlock Test ........................................................................................................... 7-111

A. Running the Hardlock Test ............................................................................................ 7-111 B. Hardlock Problem Solving............................................................................................. 7-112

XXII. Seabed Statistics ....................................................................................................... 7-113 A. Creating a Seabed Square in Seabed Statistics .............................................................. 7-114 B. Creating Seabed Statistics.............................................................................................. 7-117 C. Reassigning Seabed Identification Values..................................................................... 7-119 D. Exporting Seabed Data to a Text File ............................................................................ 7-120 E. Converting Seabed Identification Colors to Project Colors........................................... 7-121

XXIII. Cross Check Statistics.............................................................................................. 7-122 A. Running the Statistics Program...................................................................................... 7-122 B. Calculating Cross Check Statistics ................................................................................ 7-122 C. View and Print the 3-D View in the Statistics Program ................................................ 7-123 D. Viewing and Printing the Cross Check Statistics Report............................................... 7-124 E. Example in Cross Check Statistics ................................................................................ 7-125

XXIV. Channel Condition Reporter .................................................................................. 7-126 A. Channel Condition Reporter Interface ........................................................................... 7-126 B. Running Channel Condition Reporter Program............................................................. 7-127

XXV. 3D Terrain Viewer ................................................................................................... 7-137 A. Running the 3DTV Program.......................................................................................... 7-138 B. Terrain Settings in 3DTV............................................................................................... 7-140 C. 3D Terrain Viewer Flight Modes................................................................................... 7-143 D. Display Options in the 3D Terrain Viewer .................................................................... 7-145 E. Positioning your Camera in the 3D Terrain Viewer ...................................................... 7-159 F. Saving your Views in the 3D Terrain Viewer ............................................................... 7-168 G. Optimizing 3D Terrain View Performance.................................................................... 7-170

8. DREDGEPACK® ..................................... 8-1

I. Overview ............................................................................................................................... 8-1

x HYPACK® MAX Manual 1/05

II. Running DREDGEPACK® ............................................................................................ 8-1 III. Windows in Dredgepack®............................................................................................... 8-2

A. Area Map Window in DREDGEPACK®.......................................................................... 8-2 B. Data Display Window in DREDGEPACK®..................................................................... 8-3 C. Left-Right Indicator in DREDGEPACK® ........................................................................ 8-3 D. Boat Profile Window in DREDGEPACK® ...................................................................... 8-3 E. Device Windows in DREDGEPACK®............................................................................. 8-9 F. Alarms in DREDGEPACK®............................................................................................. 8-9

IV. Matrix Files in DREDGEPACK®.................................................................................. 8-9 A. Entering Survey Data into a Matrix File.......................................................................... 8-10 B. Loading and Unloading a Matrix Files in DREDGEPACK® ......................................... 8-13 C. Multiple Matrix Files in DREDGEPACK® .................................................................... 8-13 D. Saving Dredge Depths to the Matrix in DREDGEPACK® ............................................ 8-13 E. Editing Matrix Depths in DREDGEPACK® .................................................................. 8-15 F. Matrix Color Settings in DREDGEPACK®.................................................................... 8-16 G. Saving Matrix Files in DREDGEPACK®....................................................................... 8-17

V. Bucket Patterns in DREDGEPACK® ............................................................................. 8-18 A. Displaying Bucket Patterns in DREDGEPACK®........................................................... 8-18 B. Displaying Bucket Patterns in HYPACK® MAX........................................................... 8-20

VI. Volume Estimates in DREDGEPACK®...................................................................... 8-21

9. APPENDIX................................................ 9-1

I. HYPACK® Data Types....................................................................................................... 9-1 A. HYPACK® Project File Types.......................................................................................... 9-1 B. HYPACK® Data File Types ............................................................................................. 9-4

II. Hardlock Types and their Programs.............................................................................. 9-5 III. Keyboard Commands...................................................................................................... 9-6

A. Survey Keyboard Commands ............................................................................................ 9-6 B. 3DTV Keyboard Commands ............................................................................................. 9-7 C. 3D Shape Editor Keyboard Commands............................................................................. 9-8

IV. Hardware Interfacing.................................................................................................... 9-10 A. Serial Interfacing.............................................................................................................. 9-10 B. Binary Coded Decimal (BCD) Devices ........................................................................... 9-13 C. GPIB Interfaces................................................................................................................ 9-13

V. Drivers and their Devices .................................................................................................. 9-14 A. Device Drivers ................................................................................................................. 9-14 B. Devices Supported by HYPACK® Hardware ................................................................. 9-15 C. Devices Supported by Side Scan Survey......................................................................... 9-24

VI. Geodesy ........................................................................................................................... 9-24 A. Ellipsoids.......................................................................................................................... 9-24 B. Geoids .............................................................................................................................. 9-26 C. Datums ............................................................................................................................. 9-26 D. Datum Transformations ................................................................................................... 9-26

HYPACK® MAX Manual 1/05 • xi

E. Projections........................................................................................................................ 9-28 VII. Basic Acoustics for the Hydrographer......................................................................... 9-32

A. Sound Velocity and Ray Bending.................................................................................... 9-32 B. Beam Frequency Effects on Survey Data ........................................................................ 9-35 C. Beam Geometry ............................................................................................................... 9-35 D. Timing and Latency ......................................................................................................... 9-37

VIII. Echosounders 101....................................................................................................... 9-39 A. How Echosounders Work ................................................................................................ 9-39 B. Echosounder Calibration.................................................................................................. 9-41 C. Beam Patterns .................................................................................................................. 9-42

IX. Launching External Programs from the HYPACK® MAX Menu........................... 9-43

HYPACK® MAX Manual 3/03 • i

Index1PPS pulse

cabling diagram, 2-102 settings, 2-100, 2-106

3D Shape Editor. See Also 3D shapes camera controls, 7-23 grouping

names, 7-43 object hierarchy first, 7-43 objects first, 7-42

keyboard commands, 9-8 overview, 7-19 procedure, 7-23 settings

advanced objects, 7-26, 7-27, 7-29 attachment points, 7-30 basic objects, 7-26 colors, 7-22, 7-35, 7-38 default color, 7-35 display options, 7-21 dredge arms, 7-30 faces, 7-38 groups, 7-41–7-44, 7-41–7-44 mining lamp, 7-22 model types, 7-21 names, 7-40, 7-43 object properties, 7-31–7-41, 7-40, 7-43 rotation, 7-33 shading, 7-22 textures, 7-36, 7-38 translation, 7-32 transparency, 7-38 vessel origin, 7-30 visibility, 7-37 windows, 7-38

windows design panes, 7-21 face editing window, 7-38 main, 7-20 object browser, 7-21 object modeling window, 7-26, 7-27, 7-29 object properties, 7-21, 7-40

3D shapes animating, 7-26 creating

3D Shape Editor, 7-23 advanced objects, 7-26, 7-29 basic objects, 7-26 dredge arms, 7-30 groups, 7-44 spuds, 7-30 vessel origin, 7-30

editing 3D Shape Editor, 7-25, 7-31, 7-32, 7-34, 7-38, 7-41

advanced objects, 7-29 faces, 7-29, 7-38 groups, 7-41, 7-44 name, 7-40 object properties, 7-31–7-41, 7-40 removing objects, 7-31 rotation, 7-33 translation, 7-32 visibility, 7-37

exporting, 7-45 grouping, 7-41–7-44 grouping objects, 7-44 importing

3D Shape Editor, 7-25 3D Terrain Viewer, 7-153

loading 3D Shape Editor, 7-25 3D Terrain Viewer, 7-153

object properties colors, 7-35 default color, 7-35 rotation, 7-33, 7-41 scale, 7-41 textures, 7-36 translation, 7-32, 7-41 visibility, 7-37

saving, 7-44 local computer, 7-45 network locations, 7-45 VES files, 7-45

scaling 3D Terrain Viewer, 7-155

translating, 7-32, 7-33 3D Terrain Viewer

3DTV mode, 7-138 camera controls, 7-159–7-161

camera control tool bar, 7-161 camera position window, 7-159 camera set position dialog, 7-160 default position, 7-160 heading, 7-164 horizontal positioning, 7-162 keyboard commands, 7-161 motion, 7-161 speed and direction, 7-164, 7-167 tilt, 7-166 vertical positioning, 7-163 vessel settings dialog, 7-161 yaw, 7-165 zoom, 7-167

flight modes circle, 7-145 LNW file, 7-144

ii HYPACK® MAX Manual 1/05

manual, 7-143 survey, 7-144

Matrix 3DTV, 7-137, 7-138 movies

AVI, 7-169 recording, 7-168, 7-169 replaying, 7-169 saving, 7-169

overview, 7-137 procedure, 7-138 screen captures, 7-168 settings

AVI, 7-169 boat shapes, 7-153 buffering, 7-171 camera controls. See 3D Terrain Viewer:camera controls camera position, 7-158, 7-162 channel templates, 7-151 colors, 7-146, 7-149, 7-152 data set, 7-138 dredging equipment, 7-156 dynamic lighting, 7-147 flight modes, 7-139, 7-143 frame rate, 7-171 GUI response, 7-170 model type, 7-145 survey lines, 7-151 targets, 7-158 terrain settings, 7-140 vertical scale, 7-148 water surface, 7-149

windows camera position window, 7-158, 7-159 lighting position window, 7-148 size and position, 7-139

3D TIN models. See TIN models:3D TIN 3D view channel template, 7-54 3D view cross check statistics graph, 7-124 3DM files

3D Terrain Viewer, 7-139, 7-169 definition, 9-1

3DTV. See 3D Terrain Viewer 3DV files

3D Terrain Viewer, 7-139, 7-146 definition, 9-1

3OD files 3D Shape Editor, 7-44 converting, 7-45 definition, 9-1 exporting, 7-45 saving, 7-44, 7-45

acoustics theory bar check, 9-34 beams

beam angles, 9-43 beam frequency, 9-35 beam geometry, 9-35 beam patterns, 9-42 ray bending, 9-32, 9-33 reflection, 9-33 refraction. See acoustics theory:beams:ray bending

overview, 9-32

multibeam, 9-33–9-35 single beam, 9-32–9-33

Snell's Law, 9-33 sound velocity

changes, 9-33, 9-34 corrections, 9-35 profile, 9-35

ADCP files ADCP Logger, 7-84 ADCP Profile, 7-99 ADCP to DXF, 7-109 converting

ADCP to DXF, 7-109 displaying

ADCP Logger, 7-85, 7-86 ADCP Profile, 7-103

loading ADCP Profile, 7-99 ADCP to DXF, 7-110

logging, 7-88 saving, 7-84, 7-88

ADCP Logger break test, 7-86 overview, 1-43, 7-84 plan file, 7-87 procedure, 7-85 settings, 7-88

connection, 7-86 data display window, 7-97 heading, 7-98 modes, 7-85 output format, 7-98 plan file, 7-87 tabular view, 7-97 units, 7-96 velocity profile windows, 7-97 velocity reference, 7-96

windows ADCP Logger, 7-88 data display, 7-95 Hypack information, 7-95 intensity profile, 7-92 magnitude direction profile, 7-93 tabular view, 7-89 transect vector, 7-93 velocity profiles, 7-90

ADCP Profile color settings, 7-103, 7-104 exporting DXF files, 7-107 Object Editor, 7-104 overview, 1-47, 7-99 procedure, 7-99 reports

cross sections graphs, 7-106 discharge reports, 7-106, 7-108

settings color settings, 7-103 cross section graph, 7-103 object files, 7-105 print options, 7-106, 7-108 survey data, 7-102 survey lines, 7-104

HYPACK® MAX Manual 3/03 • iii

view options, 7-103 ADCP to DXF

overview, 1-48, 7-109 procedure, 7-109 settings, 7-110

Advanced Channel Design checking faces, 7-46 example

adding toes, 7-56 LNW to CHN, 7-58

inverting depths, 7-47 overview, 1-46, 7-46 procedure, 7-46

creating a CHN file from an LNW file, 7-51, 7-53 entering face data, 7-48 entering node data, 7-46 splitting faces, 7-50

settings faces, 7-48 LNW to CHN, 7-51 nodes, 7-46 view options, 7-54

warnings nonconvex shape error, 7-50 non-flat face error, 7-50 orientation error, 7-50

advanced read parameters Single Beam Max. See Single Beam Max:settings:advanced

read paramters alarms

ADCP Logger, 7-89 Dredgepack

cross track error, 8-9 device alarm, 8-9 HDOP, 8-9 minimum depth, 8-9 no kinematic, 8-9 non-differential, 8-9

Side Scan Survey, 5-7 Survey, 3-12

cross track error, 3-4, 3-17, 3-23 device alarm, 3-23 HDOP, 2-108, 3-23 minimum depth, 3-4, 3-23 no kinematic, 3-23 non-differential, 2-140, 3-23 number of satellites, 2-108

alignment devices with boat, 2-92 multibeam acoustics effects, 9-36 TIN models with survey lines, 6-70

all format definition, 9-4

all format-edited, 1-28, See Also survey files-edited, data files

ADCP Profile, 7-100 Cross Sections and Volumes, 6-25 Cross Sort, 4-37 Export, 6-104 Manual Entry program, 1-47, 7-72 Mapper, 4-37 Merge XYZ, 7-83

Metric File Converter, 7-79 Remap, 7-79 Seabed Statistics, 7-114 Single Beam Max, 4-9 Sort program, 4-37, 4-38 Sounding Adjustment program, 7-70 TIN Model program, 6-67, 6-70, 6-78, 6-89, 6-94

all format-sorted, 1-29, See Also survey files-sorted, data files

Cross Sections and Volumes, 6-25 Cross Sort, 4-38, 4-41, 4-42 Hypack Max, 4-1 Metric File Converter, 7-79 Seabed Statistics, 7-114 TIN Model program, 6-67, 6-70, 6-78, 6-89

amplitude profile displaying

Hyscan, 5-24, 5-28 Side Scan Survey, 5-9

Analog Side Scan overview, 5-3 settings, 5-3

anchors Boat Shape Editor, 7-18 dropping, 3-30 on boat shapes, 3-29, 7-18 raising, 3-30

annotation ADCP Profile, 7-106 Cross Sections and Volumes, 6-33 Hardware device setup, 2-83, 2-114, 2-122

ARCS charts ARCS PIN, 2-2 ARCS User Permit, 2-2 base charts, 2-3 chart updates, 2-1, 2-3, 2-4 georeferencing, 2-4 loading, 2-1

hard drive, 2-3 Hypack Max, 2-4

navigator permits, 2-3 permit numbers, 2-3 permits, 2-2 skipper permits, 2-3

ARCS Manager overview, 2-3 procedures

loading ARCS charts, 2-1 loading ARCS permits, 2-3 loading charts to your hard drive, 2-3 loading charts to your project, 2-4

settings ARCS permit numbers, 2-3 geodesy, 2-4

area map Hypack Max

Border Editor, 2-57, 2-58, 2-59 Line Editor, 2-43, 2-45, 2-46, 2-47, 2-60 Plotting Sheet Editor, 2-149 Target Editor, 2-147

Survey, 2-116, 3-12, 3-13, 3-31 display settings, 3-10, 3-15

iv HYPACK® MAX Manual 1/05

helmsman display, 3-24 orientation, 3-14

authorization-C-Maps, 2-6 automatic leg switching, 3-5, 3-62 autosearch

Single Beam Max, 4-32 AVI files

3D Terrain Viewer, 7-139, 7-169 azimuths

back azimuth, 2-35 geodetic, 2-25, 2-34, 2-35 geodetic azimuth

Channel Condition Reporter, 7-127 grid azimuth, 1-20

Hypack Max, 1-7 range-azimuth positioning, 2-94 reference azimuth, 2-94, 2-95 Single Beam Max, 4-22, 4-33

background files. See charts backup

catalog files, 3-61 bar check, 2-114

Bar Check program, 1-42 theory, 9-41

base surveys annotation, 6-37, 7-106 loading, 6-25, 6-54 overlaying files, 6-25 template information, 6-26

Beam Angle Test overview, 1-44

bearing measurements Side Scan Survey, 5-8, 5-9 Single Beam Max, 4-22, 4-33 Survey, 3-18, 3-34 TIN Model program, 6-78

block editing Seabed Statistics, 7-119 Single Beam Max, 4-22, 4-24, 4-33

BMP files 3D Terrain Viewer, 7-168 Dredgepack, 8-8 Hyplot Max, 6-12, 6-13, 6-15 Hyscan, 5-29, 5-30 Title Block Editor, 6-13, 6-15

Boat Shape Editor anchors, 3-29, 7-18 overview, 1-41, 7-17 procedure, 7-18

boat shapes 3D Terrain Viewer

display options, 7-154 importing, 7-153

assigning symbols or shapes, 2-131 color settings, 2-132, 2-133 creating

3D Shape Editor, 7-19, 7-23, 7-24, 7-45 Boat Shape Editor, 7-17, 7-18 Dredgepack, 8-8

custom shapes 3D Shape Editor, 7-20 3D Terrain Viewer, 7-153

Boat Shape Editor, 7-17 Dredgepack, 8-8

displaying 3D Shape Editor, 7-21 3D Terrain Viewer, 7-153, 7-154 Boat Shape Editor, 7-18 Dredgepack, 8-6 Side Scan Survey, 5-11 Survey, 3-24–3-29

Dredgepack positions, 8-2, 8-6 tracklines, 8-2

editing visibility, 7-37

follow boat Side Scan Survey, 5-11 Survey, 3-14

importing, 7-19 3D Terrain Viewer, 7-153 Dredgepack, 8-8

labeling, 2-133 loading

Boat Shape Editor, 7-18 object properties

visibility, 7-37 orientation, 2-81, 2-92, 2-94, 2-105, 2-125 outline colors, 2-132 saving

3D Shape Editor, 7-45 Boat Shape Editor, 7-19

scaling 3D Shape Editor, 7-37 3D Terrain Viewer, 7-155

Side Scan Survey display options, 5-11 positions, 5-18

Survey anchors, 3-29 assigning symbols and shapes, 3-27 color settings, 3-28 custom shapes, 3-28 display options, 3-24–3-29 follow boat, 3-14 importing, 3-27 labeling, 3-28 main vessel, 3-29, 3-30 outline colors, 3-28 positions, 3-13, 3-16–3-17, 3-23, 3-27, 3-35 range radius, 3-27 speed, 3-27 symbol colors, 3-28 symbols, 3-27 track parameters, 3-27 tracklines, 3-27 vectors, 3-27

symbol colors, 2-132, 2-133 Border Editor. See Also border files

example clipping survey lines, 2-59

overview, 1-41, 2-57 procedure, 2-57

border files. See Also BRD files, Border Editor

HYPACK® MAX Manual 3/03 • v

clipping survey lines, 2-57 creating

cursor method, 2-57 spreadsheet method, 2-58 Survey, 3-42

displaying, 2-58, 2-59, See Also project files:enabling Survey, 3-42

editing, 2-58, 2-59 editing survey data, 3-42 limiting volumes calculations, 6-35 loading

Survey, 3-42 overview, 1-37 previewing, 2-58, 2-59 saving, 2-59

Border Editor, 2-58 Border Editor, 2-59 Survey, 3-43

bottom classification exporting

Seabed Statistics, 7-120 bottom classifications

defining, 7-114, 7-116 box templates

Cross Sections and Volumes, 6-28, 6-49, 6-50 TIN Model program, 6-95

BRD files Border Editor, 2-59 Cross Sections and Volumes, 6-35 definition, 9-1 Hypack Max, 4-36 Line Editor, 2-57 Survey, 3-42 TIN Model, 6-82

BSB charts, 1-33, See Also charts:BSB charts bucket patterns

displaying Dredgepack, 8-2, 8-18 Hypack Max, 8-20

modes, 8-18 view options

Dredgepack, 8-18 Hypack Max, 8-20

cablecount. See Also: towfish, device drivers:cablecnt.dll, device drivers:towcable.dll

assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127, 2-128 driver setup, 2-128, 2-130

calibration echosounders, 7-10

bar check, 2-114 Bar Check, 9-34 Latency Test, 2-141–2-144

GPS Latency Test, 2-142, 2-141–2-144

calibration tests bar check, 1-42, 2-114, 9-34 Latency Test, 1-42, 2-141–2-144 Patch Test, 1-42

camera controls 3D Shape Editor

3D camera control, 7-23 zoom and pan, 7-23

3D Terrain Viewer, 7-159–7-161 camera control tool bar, 7-161 camera position window, 7-159, 7-161 camera set position dialog, 7-160 default position, 7-160 heading, 7-164 horizontal positioning, 7-162 keyboard commands, 7-161 motion, 7-161 speed, 7-167 tilt, 7-166 vertical positioning, 7-163 yaw, 7-165 zoom, 7-167

catalog files. See Also LOG files backup, 3-61 creating, 1-29 definition, 9-2 editing, 1-31 merging All Format files, 1-30 naming, 3-7 overview, 1-29 saving, 1-29 show lines report, 1-31

centerline reference, 6-43 centerlines

creating Channel Design Max, 2-62, 2-63 Line Editor, 2-41

Cross Sections and Volumes, 6-32, 6-34, 6-36, 6-43, 6-63, 6-64

displaying 3D Terrain Viewer, 7-151 ADCP Profile, 7-104

DXF export to LNW, 2-76, 2-77 importing

Channel Design Max, 2-64 labeling

ADCP Profile, 7-101 loading

Channel Condition Reporter, 7-128, 7-129 Cross Sections and Volumes, 6-27 Dredgepack, 3-20, 8-3 Single Beam Max, 4-13

settings 3D Terrain Viewer, 7-152 Channel Design Max, 2-63

chainage Channel Design Max, 2-62, 2-63

Channel Condition Reporter color settings, 7-131, 7-134 controlling depths, 7-136 exporting XYZ files, 7-135 overview, 1-48, 7-126 procedure, 7-127

creating a channel, 7-128 creating reaches, 7-131 determining shoals, 7-135

reports creating, 7-136

vi HYPACK® MAX Manual 1/05

displaying, 7-135, 7-136 editing, 7-136 printing, 7-136

settings channel limits, 7-129 channel properties, 7-130, 7-135 channel types, 7-129 colors, 7-131 DGN layer display, 7-128 project depth, 7-131, 7-136 saving, 7-133 sounding display, 7-134 turning basins, 7-130

channel condition reports creating, 7-136 displaying, 7-135 editing, 7-136 printing, 7-136

Channel Design overview, 1-41

Channel Design Max overview, 2-61 procedure, 2-62 settings

channels, 2-63, 2-65, 2-69 curved channel lines, 2-69 offset toes, 2-65 side slopes, 2-65, 2-68 survey lines, 2-69 toe shifts, 2-65 top of bank, 2-68 turning basins, 2-66

channel plan. See Also channel templates calculating volumes, 6-64 creating, 6-64 overview, 6-63 procedure, 6-63

channel plan files. See PLN files, Channel Design, channel templates, survey lines

channel properties-Channel Condition Reporter, 7-130 channel templates. See Also box templates, Template

Editor, cross sections, PLN files centerlines

3D Terrain Viewer, 7-152 ADCP Profile, 7-104 Channel Design Max, 2-61, 2-63 Cross Sections and Volumes, 6-34, 6-36, 6-40, 6-43

chainage Channel Design Max, 2-63

creating Advanced Channel Design, 7-51, 7-53 Channel Design, 2-38 Channel Design Max, 2-61, 2-62 Cross Sections and Volumes, 6-27 Line Editor, 2-50

displaying 3D Terrain Viewer, 7-151 ADCP Profile, 7-99, 7-103, 7-104 Advanced Channel Design, 7-54 Channel Design Max, 2-73 Cross Sections and Volumes, 6-24, 6-34, 6-36 Line Editor, 2-50

Survey, 3-19–3-21, 3-19–3-21 TIN Model, 6-72

editing Advanced Channel Design, 7-52 Channel Design Max, 2-63, 2-64, 2-65 Line Editor, 2-50

loading 3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46 Channel Design Max, 2-63 Cross Sections and Volumes, 6-27 Line Editor, 2-50

overview, 1-40, 6-26, 6-39 saving

Advanced Channel Design, 7-46, 7-51, 7-52 Channel Design Max, 2-63, 2-75 Cross Sections and Volumes, 6-28 Line Editor, 2-50

settings 3D Terrain Viewer, 7-151 Advanced Channel Design, 7-52 Cross Sections and Volumes, 6-34, 6-49 Line Editor, 2-50

side slopes Channel Design Max, 2-63

simplifying Advanced Channel Design, 7-52 Cross Sections and Volumes, 6-34

toe lines 3D Terrain Viewer, 7-152 Channel Condition Reporter, 7-129 Channel Design Max, 2-63

toe points Channel Design Max, 2-63, 2-67 Cross Sections and Volumes, 6-34

turning basins 3D Terrain Viewer, 7-152 Channel Design Max, 2-61, 2-63, 2-66

channel type-Channel Condition Report, 7-129 chart datum

3D Terrain Viewer, 7-150, 7-153 chart features

Chart program, 7-61 procedure

editing, 7-65 DGW Editor, 7-68

control point, 7-68 digitizing

Chart program, 7-61 DGW Editor, 7-67 Echogram program, 7-65 Shore Manual, 7-66

editing Chart program, 7-65

printing-Shore Manual program, 7-67 Shore Manual, 7-67

Chart program overview, 1-46, 7-60 procedure, 7-61

digitizing features, 7-61 registering a chart, 7-61

charts

HYPACK® MAX Manual 3/03 • vii

ARCS charts Hypack Max, 2-1 Survey, 3-31

BSB charts Hypack Max, 1-33 Survey, 3-31

C-Maps. See Also C-Maps, See Also C-Maps Hypack Max, 1-17 Survey, 3-31

DGN files, 1-34, See Also DGN files Boat Shape Editor, 7-19 Channel Condition Reporter, 7-128 Export, 6-107, 6-113 Hypack Max, 1-18 Survey, 3-31

DGW files, 1-34, See Also DGW files Boat Shape Editor, 7-18 Chart program, 7-61, 7-65 DGW Editor, 7-67 Survey, 3-31

DIG files Shore Manual program, 7-66 Survey, 3-31

digitizing DGW Editor, 7-67 Echogram, 7-65 Shore Manual, 7-66

displaying. See Also project files:loading Channel Condition Reporter, 7-128 Dredgepack, 8-2 Hypack Max, 1-32, 2-1, 2-146, 2-148, 2-152 Survey, 1-32, 3-2, 3-12, 3-13–3-15, 3-24, 3-30, 3-32

draw order, 3-31, 3-32 DXF files, 1-35, See Also DXF files

ADCP Profile, 7-107 Channel Condition Reporter, 7-128 Export, 6-107, 6-113 Hypack Max, 1-18 Survey, 3-31 TIN Model program, 6-85

geodetic parameters, 3-32 loading

Channel Condition Reporter, 7-128, 7-133 Hypack Max, 1-27, 2-1, 2-146, 2-148, 2-152 Hyplot Max, 6-1, 6-2 Survey, 3-2, 3-30, 3-31, 3-32

registering Chart program, 7-61 Echogram program, 7-65

S-57 charts Hypack Max, 1-17, 1-36 Survey, 3-31

TIF files Hypack Max, 1-37 Hyscan, 5-20 Survey, 3-31

types, 3-30 unloading, 3-32

Hypack Max, 1-28 Hyplot Max, 6-2

VPF (Vector Product Format) Hypack Max, 2-5

VPF (Vector Product Format) files Survey, 3-31, 3-32

check lines Cross Sort program, 4-40, 4-41

CHN files 3D Terrain Viewer, 7-151 Advanced Channel Design, 1-32, 7-46 Channel Design Max, 2-62 definition, 9-1 Dredgepack, 8-3 Survey, 3-20

C-Maps authorization, 2-6 day/night colors, 3-11 information query, 1-7 loading, 2-1–2-11 overview, 1-33 scales, 2-9 scanning the CD, 2-7 subscription list, 2-6 zones, 2-6

COB files. See Also Object files, See Also Object files ADCP Profile, 7-105 Cross Sections and Volumes, 6-30 definition, 9-1

color settings 3D Shape Editor, 7-22, 7-24, 7-35, 7-38

faces, 7-38 3D Terrain Viewer, 7-149

channel lines, 7-152 channel templates, 7-152 depths, 7-146 survey lines, 7-152 vessel, 7-154

ADCP Profile, 7-103, 7-104 Channel Condition Reporter, 7-131, 7-134 Cross Sections and Volumes, 6-30, 6-36 Dredgepack, 8-5, 8-16, 8-19 Export program

depths, 6-110 Hypack Max, 7-121

day/night colors, 1-11 depths, 1-8, 1-13 grid display, 1-12

Hyplot Max color bar, 6-17 depths, 6-4 matrix, 6-9 north arrow, 6-17 Seabed ID, 6-8

Hyscan, 5-24 Hysweep Survey, 5-12 Mapper, 4-45 Plotting Sheet Editor, 2-148 Scheme Builder, 3-7

chart elements, 3-9 matrix files, 3-10 survey elements, 3-9 window elements, 3-12

Seabed Statistics, 7-113, 7-116 modifying, 7-114

Seabed Statistics:, 7-114

viii HYPACK® MAX Manual 1/05

Side Scan Survey, 5-12 Single Beam Max, 4-21 Survey, 3-10, 7-121, See Also color settings:Scheme

Builder boat outlines, 2-132 boat symbols, 2-132, 2-133 boats, 2-132, 3-28 data display window, 3-17, 3-18, 3-19 depths, 3-44 matrix files, 3-44 schemes, 3-7

TIN Model program, 6-73, 6-87 COM ports. See Hardware program:settings:serial

connections COM Test, 5-4 Compress Project

overview, 1-25, 4-2 procedure, 1-25, 4-2

computer, 1-3, See hardware:PC system requirements conical projections, 9-31 connect dialog

ADCP device, 7-86 parallel event boxes, 2-123 serial helmsman display, 2-121

Content Standards for Digital Geospatial Metadata, 7-74 contour dredging, 6-43 contour TIN models, 6-75 contours

Cross Sections and Volumes contour dredging, 6-43

Hyplot Max color settings, 6-5

TIN Model attributes, 6-85, 6-87 color settings, 6-73, 6-85, 6-87 exporting, 6-85 labeling, 6-87 labels, 6-87 smoothing, 6-85, 6-86

control panel Hypack Max, 1-10 Hyplot Max, 6-2 Hyscan, 5-24

controlling depths, 7-136 CORPSCON. See geodetic parameters:Use Corpscon course made good, 2-81, 2-100, 2-105, 2-125, 3-27 cross check statistics. See statistics:cross check

graph, 7-123 cross lines

Statistics program, 7-122 cross section sessions

creating. See Cross Sections and Volumes:procedure saving. See Cross Sections and Volumes:settings:saving

cross sections (channel). See Also channel templates, box templates, Template Editor, PLN files

creating Channel Design, 2-38 Channel Design Max, 2-61, 2-62 Cross Sections and Volumes, 6-27 Line Editor, 2-50

displaying ADCP Profile, 7-99, 7-103, 7-104

Cross Sections and Volumes, 6-24, 6-34, 6-36 Line Editor, 2-50 Survey, 3-12, 3-19–3-21, 3-22

printing, 6-37, 7-106 segments, 6-43

cross sections (data) creating

TIN Model program, 6-67, 6-78 displaying, 8-3

ADCP Profile, 7-99, 7-103, 7-104 Cross Sections and Volumes, 6-24, 6-36 Single Beam Max, 4-21 Survey, 3-12, 3-19–3-21, 3-22

printing ADCP Profile, 7-106 Cross Sections and Volumes, 6-37

Cross Sections and Volumes color settings

pen properties, 6-30 examples

calculation method comparison, 6-58 changing templates, 6-56 channel plan, 6-64 session setup, 6-53

exporting DXF files, 6-37 Object Editor, 6-29 overview, 1-46, 6-24 procedure, 6-24 reports

cross sections graphs, 6-37 gap report, 6-34 top of bank report, 6-34 volumes, 6-38

settings box templates, 6-51 channel plan. See Also channel templates channel templates, 6-27, 6-34 color settings, 6-30, 6-36 cross section graph, 6-36 print options, 6-37 saving, 6-24 survey data, 6-24, 6-25 templates, 6-34 view options, 6-36

Template Editor, 6-27 volumes calculations

end area 1 method, 6-44 end area 2 method, 6-45 end area 3 method, 6-46 method comparison, 6-40 Philadelphia methods, 6-49 reach volumes, 6-63 Savannah method, 6-47 standard Hypack method, 6-43

warnings average end area and nonparallel survey lines, 6-42

Cross Sort program, 4-37 overview, 1-45, 4-40 procedure, 4-41

cross track error, 8-9, See Also distance off line Dredgepack, 8-3 Hardware, 2-137

HYPACK® MAX Manual 3/03 • ix

multiple vessels, 2-133, 3-29 parallel helmsman display, 2-119 Survey, 3-4, 3-12, 3-16, 3-17, 3-20, 3-23 USB helmsman display, 2-119

CSS files. See Cross Sections and Volumes:settings Cross Sections and Volumes program, 6-24 definition, 9-1

cut profile window. See Dredgepack:windows:cut profile window

damping, 3-27 Data Adjustments program

correcting offset errors, 2-145, 2-146 overview, 1-47, 2-145, 7-71 procedure, 2-145, 7-71

data display window color settings, 2-132–2-133, 3-19 fonts, 3-19 item order, 3-18 item selection, 3-18, 3-46 multiple vessels, 2-132, 3-18, 3-19 Survey, 3-12, 3-17

data file properties, 6-31 data files

compressing, 1-25 disabling

Export, 6-105 Hypack Max, 4-1 Hyplot Max, 6-2

displaying. See data files:enabling drawing. See data files:enabling, loading enabling

Export, 6-105 Hypack Max, 1-28, 4-1 Hyplot Max, 6-2

geodesy conversion, 2-36 loading, 1-27 unloading, 1-28, 4-1

data logger Side Scan Survey, 5-15, 5-16

datum transformation parameters 3-parameter, 2-14, 2-27 7-parameter, 2-15, 2-27 calculating, 9-26

3-parameter, 2-26, 2-27, 2-29, 2-32, 9-27 7-parameter, 2-27, 2-29, 2-32, 9-27 CORPSCON function, 2-16 exact formulae, 9-28 multiple regression formulas, 2-18 NIMA function, 2-17 numerical difference, 9-28 regression formulae, 9-27

no transformation, 2-14 specifying, 2-14 testing, 2-26 usage, 2-98

Datum Transformation program, 1-47 overview, 2-25, 2-26 printing screen, 2-27 procedure

3-parameter calculations, 2-26 testing 3- and 7-parameter transforms, 2-26

datum transformations

procedure CORPSCON feature, 2-16 multiple regression formulas, 2-18 NIMA feature, 2-17

datums definition, 9-26 separation of chart datum and reference ellipsoid, 7-13

day/night colors, 1-11, 3-11 DBL (Distance from Beginning of Line)

ADCP Profile, 7-104, 7-106 Cross Sections and Volumes, 6-33, 6-35, 6-36, 6-37 Export, 6-115 Manual Entry program, 7-73 Single Beam Max, 4-12

DCT files definition, 9-1 Sounding Adjustments program, 7-70

DEP files definition, 9-1 Echogram program, 7-65 Single Beam Max, 4-20

depth mode ADCP Profile, 7-102 Cross Sections and Volumes, 6-33 Dredgepack, 8-14 Single Beam Max, 4-10, 4-11 Survey, 3-41 TIN Model program, 6-72

depths. See Also survey files-raw, survey files-edited, survey files-sorted

calculating position, 9-37 camera controls

3DTV, 7-162, 7-163 color settings

3D Terrain Viewer, 7-146 ADCP Profile, 7-104 Dredgepack, 8-5 Export, 6-110, 6-111 Hypack Max, 1-8 Hyplot Max, 6-4 Scheme Builder, 3-10 Survey, 3-44

corrected, 1-44, 3-45, 4-7, 4-10 correcting. See Also sound velocity corrections, tide

corrections, draft/squat corrections, survey files-raw:editing, survey files-edited:editing

Data Adjustments program, 7-72 Single Beam Max, 4-13

design grade, 6-28, 6-43, 6-50 digitizing

Chart program, 7-64 Echogram program, 7-66 XYZ Collector, 7-69

displaying, 8-3 3D Terrain Viewer, 7-146 ADCP Profile, 7-99, 7-102, 7-103 ADCP to DXF, 7-110 Channel Condition Reporter, 7-133 Chart program, 7-64 Cross Sections and Volumes, 6-24, 6-33, 6-36 Dredgepack, 8-6, 8-13, 8-9–8-17 Hypack Max, 1-13, 5-33, 7-70

x HYPACK® MAX Manual 1/05

Hyplot Max, 6-1, 6-2, 6-7 Hyscan, 5-22 Memory Viewer, 3-49 Side Scan Survey, 5-7–5-9 Single Beam Max, 1-44, 4-9, 4-21, 4-22, 4-23, 4-27, 4-28,

4-29 Survey, 3-10, 3-18, 3-35, 3-49 TIN Model program, 6-67, 6-71 XYZ Collector, 7-70

exporting Export, 6-109, 6-115 Hyplot Max, 6-22 Seabed Statistics, 7-120 Single Beam Max, 4-35 TIN Model program, 6-89

filtering Dredgepack, 8-14 Single Beam Max, 4-8, 4-16–4-17 Survey, 3-41

inverting Advanced Channel Design, 7-47 Channel Condition Reporter, 7-135 Export, 6-115 Hyplot Max, 6-9 Line Editor, 2-52 Merge XYZ, 7-84 Single Beam Max, 4-30 Template Editor, 2-52 TIN Model program, 6-69, 6-72

labeling ADCP Profile, 7-101 ADCP to DXF, 7-110 Cross Sections and Volumes, 6-32 Hypack Max, 1-13 Hyplot Max, 6-7, 6-22

loading 3D Terrain Viewer, 7-138 Cross Sections and Volumes, 6-25 Dredgepack, 8-13 Hypack Max, 7-70 Hyplot Max, 6-1 TIN Model, 6-68

Manual Entry, 7-73 overdredge limit, 6-26, 6-43 plotting

Hyplot Max, 6-7 Survey, 3-65

presorting Single Beam Max, 4-17

project grade, 6-28, 6-43, 6-50 rounding options


saving. See survey files-raw:saving, survey files-edited:saving, survey files-sorted:saving, digitizing programs

subgrade. See depths:overdredge limit supergrade, 6-26, 6-43 unit conversion

Metric File Converter, 7-79 design grade, 6-28, 6-43, 6-50 device drivers

cablecnt.dll, 2-127, 2-131 assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127, 2-128 driver setup, 2-128, 2-130 warning, 2-129

echotrac.dll, 2-115 HPGL.dll, 3-63 inn448.dll, 2-114 kinematic.dll, 2-99, 2-106, 7-9 lcd3.dll, 2-118 lcd4.dll, 2-120 listing

Hypack Hardware, 9-15 Side Scan Hardware, 5-1, 9-24

lpt_tap.dll, 2-122 NetNMEA.dll, 3-55 NMEA.dll, 2-125 OTFgyro.dll, 2-125 overview, 9-14 seabedID.dll, 7-113, 7-121 selecting, 2-79–2-80 settings. See Hardware program:settings sminput.dll, 3-53 tidefile.dll, 3-47 towcable.dll, 2-127, 2-131

assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127 driver setup, 2-128, 2-130 warning, 2-129

trackp.dll, 2-134 trackpo.dll, 2-134 trkplxt.dll, 2-135 wintab32.dll. See digitizer drivers

device settings. See Also Hardware program:settings, hardware:selecting devices, Hardware program:selecting devices

displaying Multibeam Max, 2-146 Single Beam Max, 2-146 Single Beam Max, 4-15

editing Hardware, 2-97 Multibeam Max, 2-146 Side Scan Hardware, 5-6 Single Beam Max, 2-146, 4-15

device setup dialog, 2-79, 2-80 GPS, 2-105 parallel event box, 2-122 parallel helmsman, 2-118 serial helmsman, 2-120 towfish, 2-127

device windows Dredgepack, 8-9 Survey, 3-12, 3-23

DGN files. See Also charts:DGN files definition, 9-2 Export, 6-113 loading

Boat Shape Editor, 7-19 Channel Condition Reporter, 7-128, 7-133

HYPACK® MAX Manual 3/03 • xi

overview, 1-34 DGN origin and units. See Export program:settings:DGN

origin and units DGW Editor

overview, 7-67 procedure, 7-67

DGW files. See Also charts:DGW files creating, 7-61

DGW Editor, 7-67 definition, 9-2 DGW Editor, 7-67 editing, 7-65 overview, 1-34

differential mode, 3-23, See GPS:positioning modes DIG files

creating-Shore Manual program, 7-66 definition, 9-2 editing, 7-67

digitizer drivers, 7-60, 7-65 digitizing programs

Chart program, 7-60 DGW Editor, 7-67 Echogram program, 7-65 Shore Manual, 7-66 XYZ Collector, 7-69

directory structure, 1-20 overriding target paths, 3-33 survey files-raw, 3-7

discharge displaying

ADCP Profile, 7-102 discharge reports, 7-106 distance from beginning of line. See DBL (Distance from

Beginning of Line) distance measurements

Channel Condition Reporter, 7-127 Dredgepack. See distance measurements:Survey Hypack Max, 1-7, 1-20 Side Scan Survey, 5-8, 5-9 Single Beam Max, 4-22, 4-33 Survey, 3-34 TIN Model program, 6-78

distance units. See geodetic parameters:distance units DOP history, 3-49 draft table. See Also squat and settlement table draft/squat corrections

applying Hardware, 2-114, 7-10 Single Beam Max, 4-19 Survey, 3-46, 3-48

creating Hardware. See draft table

displaying Dredgepack, 8-7 Memory Viewer, 3-49 Single Beam Max, 4-24, 4-28 Survey, 3-49

editing Single Beam Max, 4-11

exporting Export, 6-115 Memory Output Program, 3-50

warning, 2-114 dredge shapes

creating 3D Shape Editor, 7-19 Dredgepack, 8-8

displaying 3D Terrain Viewer, 7-156 Dredgepack, 8-6

Dredge Viewer. See 3D Terrain Viewer:Matrix 3DTV Dredgepack

bucket patterns, 8-2, 8-18 capping, 8-18 color settings, 8-5 procedure, 8-1 settings

alarms, 8-9 boat shapes, 8-7 colors, 8-19 matrix options, 8-13

volume estimates, 8-21 windows

cut profile, 8-3 data display. See Survey:windows:data display window left-right indicator, 8-3

dredging contours, 6-43 driver setup dialog, 2-79, 2-83

Hardware GPS, 2-106 MRUs, 2-82 parallel helmsman, 2-119 towfish, 2-130

Side Scan Hardware, 5-2 dual frequency data

ADCP Profile, 7-102 Cross Sections and Volumes, 6-33 Export program, 6-22, 6-107 Hypack Max, 1-14 Hyplot Max, 6-9 Mapper, 4-33, 4-34 overview, 2-111 Single Beam Max, 4-22, 4-27 Sort program, 4-39

dual monitors, 1-2, 2-116–2-117, 3-24 DXF and DGN Parameters. See Export

program:settings:DXF and DGN Parameters DXF files. See Also charts:DXF files

ADCP to DXF, 7-109 Channel Condition Reporter, 7-128 definition, 9-2 Export, 6-107, 6-113 exporting

ADCP Profile, 7-107 Cross Sections and Volumes, 6-37 DXF to LNW conversion, 2-76 Export, 6-107 Hyplot Max, 6-20 TIN Model program, 6-85

Hypack Max, 1-35 converting to survey lines, 2-76

loading Channel Condition Reporter, 7-128 Export, 6-104

xii HYPACK® MAX Manual 1/05

Hypack Max, 2-1 overview, 1-35

EC1 records, 2-111, See Also survey files-raw EC2 records, 2-111, See Also survey files-raw, dual

frequency data Echogram program

overview, 1-46, 7-65 procedure, 7-65 settings

event marks, 7-65 scale, 7-65

Echosounder Display overview, 1-43, 3-54 procedure, 3-54 settings, 3-54

echosounders annotation, 2-83, 2-114, 2-122 as boat origin, 2-90 calibrating, 2-114

bar check, 2-114 bar check theory, 9-41 Latency Test, 2-141–2-144 overview, 7-10

calibration warning, 2-114 data. See survey files-raw function

beam output, 9-39 beam reflection, 9-39 hard vs soft bottom, 9-39 sensitivity setting, 9-40 threshold setting, 9-40

multiple transducer offsets, 2-111 types

dual frequency, 2-111 multibeam, 2-112 multiple transducer, 2-111 single beam, 2-110

ECM records, 2-111, See Also survey files-raw edit directory, 1-20 elevation

camera controls 3DTV, 7-162, 7-163, 7-164

elevation mode ADCP Profile, 7-102 Dredgepack, 8-14 Geodetic Parameters program, 2-13 Line Editor, 2-51 Single Beam Max, 4-10, 4-11, 4-15 Survey, 3-41 TIN Model program, 6-72

elevations-corrected, 4-7, 4-10, 4-19 ellipsoid height, 2-82, 2-98, 2-100, 2-104, 2-106, 9-25 ellipsoids. See Also reference ellipsoid

definition, 9-24 selecting

Datum Transformations program, 2-26 Geodetic Parameters, 2-12, 2-19, 2-20

enabling project files. See project files:enabling

end area 1volumes calculations, 6-44 end area 2 volumes calculations, 6-45 end area 3 volumes calculations, 6-46

ending line, 3-61 event taps. See parallel event boxes events

annotation echosounders, 2-83, 2-114 parallel event boxes, 2-122

connecting Survey, 3-4

creating. See Also events:logging Echogram program, 7-65 Survey, 3-62–3-63

displaying Cross Sections and Volumes, 6-33 Hypack Max, 1-16, 6-7 Side Scan Survey, 5-19 Single Beam Max, 4-22 Survey, 3-4, 3-13

labeling Hypack Max, 1-16, 6-7 Survey, 3-4

logging, 3-62–3-63, 3-66 printing, 3-66 settings, 3-4, 3-62

examples Advanced Channel Design

adding toes, 7-56 LNW to CHN, 7-58

Border Editor clipping survey lines, 2-59

Cross Sections and Volumes calculation method comparison, 6-58 changing templates, 6-56 channel plan, 6-64 session setup, 6-53

Geodetic Parameters local grids, 2-21

Hardware program, 2-136 Harmonic Tides program, 7-3 Hypack Max

enabling files, 4-1 Line Editor

clipping survey lines, 2-59 cursor and offset method, 2-47 spreadsheet and offset method, 2-44

Manual Tides high-low water times and heights, 7-5 manual observations, 7-7

Matrix Editor, 2-153 Plotting Sheet Editor, 2-150 Statistics program, 7-125 TIN Model program

cutting sections, 6-79 TIN to Channel volumes calculation, 6-99 TIN to level volumes calculation, 6-101 TIN to TIN volumes calculation, 6-102

Export program color settings, 6-110, 6-111 overview, 1-46, 6-104 settings

custom formats, 6-114 DGN origin and units, 6-108 DXF and DGN file parameters, 6-107

HYPACK® MAX Manual 3/03 • xiii

DXF/DGN planned line parameters, 6-108 DXF/DGN shoreline parameters, 6-109 DXF/DGN sounding parameters, 6-109 DXF/DGN target file parameters, 6-111 DXF/DGN tic parameters, 6-111 DXF/DGN tracklines parameters, 6-112 input options, 6-107 user-defined formats, 6-114 XYZ parameters, 6-113

Export to Line File program overview, 2-76 procedure, 2-76 warnings, 2-78

external programs adding menu items, 9-43 deleting menu items, 9-44 editing tool options properties, 9-44 launching, 9-43

faces checking

Advanced Channel Design, 7-46, 7-49 convexity, 7-48 creating

3D Shape Editor, 7-29 Advanced Channel Design, 7-48

editing 3D Shape Editor, 7-29, 7-38 Advanced Channel Design, 7-48

orientation Advanced Channel Design, 7-49

FGDC standard, 7-74 file information

Single Beam Max, 4-31 file types, 9-1 fill values, 6-35 filters

Dredgepack, 8-14 RTK tides, 2-107 Single Beam Max, 4-16–4-17, 4-29, 4-30, 4-34 Survey, 2-107, 3-41

fix marks. See events flattening, 2-20, 9-24 flight modes, 7-143

circle, 7-145 LNW file, 7-144 manual, 7-143 survey, 7-144

fluxgate compasses, 2-125 follow boat

Side Scan Survey, 5-11 Survey, 3-14

fonts ADCP Profile, 7-101, 7-107 Channel Condition Reporter, 7-136 Cross Sections and Volumes, 6-32 Hypack Max

depths, 1-14 grid labels, 1-13 trackline labels, 1-16, 6-7

Hyplot Max depths, 6-9 grids, 6-6

labels, 6-16, 6-17 survey lines, 6-10, 6-22 targets, 6-11

Scheme Builder, 3-11 Survey. See Also fonts:Scheme Builder

data display window, 3-19 left-right indicator, 3-16 line labels, 3-15 screen text, 3-15 targets, 3-15

forward offsets. See offsets:Hardware program:forward frequency

beam. See acoustics theory:beams:beam frequency update. See update frequency

gain Analog Side Scan, 5-3 Side Scan Survey, 5-13

GEN files Metadata program, 7-78

geodesy. See Also geodetic parameters definition, 9-24 programs

7-Parameter Datum Transformation program. See Seven Parameter Datum Transformation program

Datum Transformation program. See Datum Transformation program

Geodetic Parameters program. See Geodetic Parameters program

Grid Conversion program. See Grid Conversion program Inverse. See Inverse program Project Converter. See Project Converter Traverse. See Traverse program Unit Conversion program. See Unit Conversion program

theory, 9-5–9-32 datum transformations, 9-26 datums, 9-26 ellipsoids, 9-24 geoids, 9-26 projections, 9-28

geodetic distance calculating, 2-25, 2-34–2-35

geodetic inverse dialog, 2-34 geodetic parameters. See Also Datum Transformations

program, Geodetic Parameters program, Geodesy charts, 3-32 converting, 2-36 datum transformation parameters, 2-13, 2-26

3-parameter, 2-14, 2-32 7-parameter, 2-15, 2-32 no datum transformation, 2-14

displaying Hyscan, 5-22

distance units, 2-19, 2-20, 2-25, 2-34, 2-131 ellipsoid, 2-12, 2-20 flattening, 2-20 georeferencing ARCS charts, 2-5 grids

local grids, 2-21 predefined, 2-19 user-defined, 2-20

multiple regression formulas, 2-18 NIMA, 2-17

xiv HYPACK® MAX Manual 1/05

projection parameters, 2-81 projections, 2-20 saving, 2-25 scale factor, 2-20 semi-major axis, 2-20 Survey, 3-2 Use Corpscon, 2-16 zones, 2-19

Geodetic Parameters program overview, 1-42, 2-12 procedure, 2-12 settings. See geodetic parameters

geoid model, 2-13 geoids, 9-26 Global Positioning System. See GPS GPS

antenna array, 2-125 calibrating

Latency Test, 2-141–2-144 dual GPS systems, 2-125 offsets

latency, 2-90, 2-141 position information, 2-98 positioning modes, 2-108

differential, 2-97 RTK (Real Time Kinematic), 2-97, See Also tide

corrections:RTK stand alone, 2-97

settings device setup, 2-105 driver setup, 2-106 offsets. See GPS:offsets

time tagging, 2-99–2-104 1PPS pulse, 2-100 fixed latency, 2-103 methods comparison, 2-100 synch. clock with ZDA, 2-82, 2-103, 2-106 ZDA and synch. clock, 2-100

warnings ellipsoid height vs mean sea level, 2-99 position accuracy warning, 2-99 update frequency affects sync clock accuracy, 2-82, 2-106

Graphical Motion Reference Unit, 3-57 Grid Conversion program

overview, 1-47, 2-25, 2-33 procedure, 2-33

grid conversions, 2-12, 2-33 grids

calculating depth differences, 6-92, 6-93, 7-14 color settings, 1-12 displaying

ADCP Profile, 7-100 Channel Condition Reporter, 7-131 Hypack Max, 1-12 Hyplot, 6-5 TIN Model program, 6-72

labeling ADCP Profile, 7-101 Cross Sections and Volumes, 6-32 Export program, 6-111 Hypack Max, 1-12 Hyplot Max, 6-6

local grid, 2-21 selecting

local grids, 2-21 predefined grids, 2-19 user-defined grids, 2-20

universal transverse mercator. See grids:UTM UTM, 9-30

gyros alignment, 2-92 correcting data, 7-72 default vessel orientation, 2-81, 2-105 multibeam acoustics, 9-35 offsets, 2-92 survey quality, 2-125

hard drive, 1-2 hardlock keys, 1-2

ARCS permit numbers, 2-2 Hardlock Test, 7-111

Hardlock Test ARCS permit numbers, 2-2 overview, 1-48, 7-111 procedure, 7-111 troubleshooting, 7-112

hardware disabling devices, 2-96 GPS

warnings, 2-82, 2-106 multibeam survey devices, 9-35 PC system requirements, 1-2, 1-3 selecting devices, 2-79–2-80, 2-118, 2-120, 2-122, 2-127, 2-

138, See Also device drivers serial, 2-86 side scan, 5-1–5-6 single beam survey devices, 9-35 testing connections, 2-87 update frequency, 9-38

Hardware program example, 2-136 overview, 1-42, 2-78 procedure, 2-78 selecting devices, 2-79–2-80, 2-118, 2-120, 2-122, 2-127, 2-

138, See Also device drivers settings

connect, 2-78, 2-85, See Also Hardware program:settings:serial connections, Hardware program:settings:parallel connections, Hardware program:settings:output to file

device setup dialog, 2-79, 2-80, See Also device setup dialog

disabling devices, 2-96 dredge hoppers, 2-136 driver setup dialog, 2-79, 2-83 editing, 2-97 heading devices, 2-125 latency, 2-79, 2-89, 2-91, 2-103, 9-38 MRUs, 2-82 network connections, 2-86 offsets, 2-79, 2-89–2-94 offsets-dual frequency transducer, 2-111 output to a file, 2-86, 2-87 parallel connections, 2-85, 2-119 parallel event box, 2-122–2-123

HYPACK® MAX Manual 3/03 • xv

parallel helmsman displays, 2-118–2-119 pitch, 2-79, 2-92 record basis, 2-79, 2-84 roll, 2-79 saving, 2-79, 2-96, 2-130 serial connections, 2-86, 2-87, 2-121 serial helmsman displays, 2-120–2-121 stations, 2-79, 2-94, 2-96 towfish, 2-127–2-131, 2-136 USB connections, 2-120 USB helmsman displays, 2-119 yaw, 2-79

warnings update frequency affects sync. clock accuracy, 2-82, 2-

106 harmonic constituents, 7-2 HCF files

Seabed Statistics, 7-114, 7-121 HCP records, 2-123 heading (camera)

3DTV, 7-167 camera controls

3DTV, 7-164 heading (vessels)

3D Terrain Viewer, 7-144 ADCP Logger, 7-89, 7-98 correcting data

Multibeam Max, 2-146 Data Adjustments, 7-72 definition, 9-36 devices

Hardware, 2-125 Survey, 2-125

displaying Hyscan, 5-22 Memory Viewer, 3-49 Side Scan Survey, 5-8 Single Beam Max, 4-25 Survey, 3-17, 3-49

measuring, 2-125, See Also gyros settings

Hardware, 2-81, 2-105, 2-125 Hysweep Hardware, 2-125

Survey heading/speed indicator, 3-57

heading/speed indicator, 3-57 heave

correcting data Data Adjustments program, 7-72 Single Beam Max, 4-18–4-20

displaying Memory Viewer, 3-49 Single Beam Max, 4-24 Survey, 3-17, 3-49

measuring. See MRUs merging with RTK tide, 4-19, 7-17 replacing with average RTK tides, 4-19, 7-17

heave compensators. See MRUs height offset. See offsets:Hardware program:height helmsman displays, 3-12, 3-24

overview, 2-115 parallel, 2-115, 2-117

connect settings, 2-119 device setup, 2-118 driver setup, 2-119

serial, 2-115, 2-120 connect settings, 2-121 device setup, 2-120

USB connect settings, 2-120

video splitters, 2-115, 2-116, 2-117 virtual screens, 2-115–2-116

HS2 files definition, 9-4

HSX files definition, 9-4 Hyscan, 5-19 Side Scan Survey, 5-16

Hypack Hardware device drivers, 9-15

Hypack Max color settings, 1-8, 1-11

day/night colors, 1-11 depths, 1-13

installation, 1-4 legend, 1-15 procedure

running external programs, 9-43 screen controls, 1-7 settings

depth display, 1-13 display, 1-7 fonts, 1-13, 1-14, 1-16, 6-7 grid display, 1-12 language, 1-20 tools, 9-43 trackline display, 1-15

system requirements, 1-2, 1-3 tools, 9-43 user interface, 1-4–1-20

information bar, 1-19 screen control bar, 1-7

warnings overwriting files, 1-23

Hyplot Max color settings

color bar, 6-17 matrix, 6-9 north arrow, 6-17

colors, 6-4 overview, 1-46, 6-1 plotting sheet information, 6-3 procedure, 6-1 settings, 6-2

color settings, 6-4, 6-17 DXF converson options, 6-21 export to DXF, 6-20 fonts, 6-6, 6-9, 6-10, 6-11, 6-16, 6-17, 6-22 matrix, 6-9 planned lines, 6-22 plotting, 6-2 plotting methods, 6-20 printing, 6-2 soundings, 6-7, 6-22

xvi HYPACK® MAX Manual 1/05

targets, 6-10, 6-23 title blocks, 6-11 tracklines, 6-23

Hyscan activity report, 5-23 color settings, 5-24 overview, 5-19 procedures

building mosaics, 5-30, 5-31 exporting TIF files, 5-30, 5-31 measuring horizontal distances, 5-24 measuring towfish altitude, 5-24 measuring vertical distances, 5-24 Mosaic View, 5-20 Scan View, 5-20

screen captures, 5-30 printing, 5-30 saving, 5-30

settings bitmaps, 5-30 colors, 5-24 file list, 5-21 mosaic, 5-31 print, 5-29 print options, 5-30 threshold, 5-28 towfish altitude, 5-28 towfish altitudes, 5-26, 5-27 view options, 5-23, 5-24 view ratio, 5-24

windows activity log, 5-23 amplitude window, 5-24 geodesy, 5-22 image view, 5-23, 5-30 mosaic view, 5-21, 5-30, 5-31 scan view, 5-21, 5-22

Hysweep Hardware overview, 1-42 settings

latency, 9-38 offsets, 2-89, 2-111 offsets-multiple transducer, 2-111

Hysweep Survey settings

colors, 5-12 display options, 5-13 gain, 5-13 side scan waterfall window, 5-12

windows side scan waterfall window, 5-8

ignore checksum, 2-109, 5-2 information query, 1-7 input format

Datum Transformation, 2-16 Line Editor, 2-42 Plotting Sheet Editor, 2-149

installation-Hypack Max, 1-4 Inverse program

overview, 1-47, 2-25, 2-34 printing screen, 2-35 procedure, 2-34

settings geodetic parameters, 2-34

IP addresses Hardware, 2-86 Window Viewer, 3-25

JPG files 3D Terrain Viewer, 7-168 Hyplot Max, 6-12, 6-15 Side Scan Survey, 5-9 Title Block Editor, 6-13

KAP files. See BSB charts keyboard commands

3D Shape Editor, 9-8 3D Terrain Viewer, 7-161, 9-7 Dredgepack, 8-18 Side Scan Survey, 5-15 Statistics program, 7-124 Survey, 9-6

kinematic tidal datum files. See KTD files, KTD Editor KTD Editor

overview, 1-41 procedure, 7-14–7-15

KTD files creating, 7-14 definition, 9-2 overview, 1-38, 7-10, 7-12 saving, 7-15

labels boats. See boats depths

ADCP Profile, 7-101 ADCP to DXF, 7-110 Cross Sections and Volumes, 6-32 Hypack Max, 1-13 Hyplot Max, 6-7, 6-22

events Survey, 3-4

grids ADCP Profile, 7-101 Cross Sections and Volumes, 6-32 Export program, 6-111 Hypack Max, 1-12 Hyplot Max, 6-6

survey lines 3D Terrain Viewer, 7-151 Channel Design Max, 2-71 DXF to LNW conversions, 2-77 Hyplot Max, 6-22 Line Editor, 2-43, 2-46 Survey, 3-61, 3-65

targets 3D Terrain Viewer, 7-158 Hypack Max, 1-19 Hyscan, 5-26 Survey, 3-36 Target Editor, 2-147

tracklines Hypack Max, 1-15

vectors ADCP to DXF, 7-110

language Hypack Max, 1-20

HYPACK® MAX Manual 3/03 • xvii

program modules, 1-20 latency. See Also offsets:Hardware program:latency,

offsets:Hysweep Hardware:latency, calibration calculating offset adjustments

Latency Test program, 2-141–2-144 correcting data

Multibeam Max, 2-146 Single Beam Max, 2-146

displaying Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15

editing Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15

overview, 9-38 settings

Hardware, 2-79, 2-89, 2-91 Transducer Offsets program, 2-93

Latency Test overview, 1-42, 2-141 procedure, 2-142 settings

read parameters, 2-142 latitude, 9-25 LBL systems, 2-136 left-right indicator

cross track error alarm, 3-4 floating text, 3-17 fonts, 3-16 overview, 3-12, 3-16, 8-3 scale, 3-16

legends ADCP Profile

print option, 7-107 Cross Sections and Volumes

graph option, 6-33, 6-41 Hypack Max, 1-15 TIN Model program, 6-72

Line Editor clipping survey lines, 2-57 example

clipping survey lines, 2-59 cursor and offset method, 2-47 spreadsheet and offset method, 2-44

importing LIN files, 2-56 input format, 2-42 overview, 1-41, 2-42 procedure, 2-57

appending files, 2-55 applying channel templates, 2-52 creating channel templates, 2-51 creating survey lines, 2-41, 2-42, 2-46 removing channel templates, 2-52

line spacing Channel Design Max, 2-63, 2-71 Line Editor, 2-40

LLS files. See datum transformation parameters:calculating:CORPSCON function

definition, 9-2 LNW files

3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46

Channel Design, 2-39 Channel Design Max, 2-62 definition, 9-2 Dredgepack, 8-3 Line Editor, 2-42, 2-44, 2-57 overview, 1-39 Pathfinder program, 7-82 Remap, 7-80 Single Beam Max, 4-12, 4-13 Survey, 3-20

LNW to CHN. See Advanced Channel Design:procedure:creating a CHN file from an LNW file

local grids, 2-21 LOG files. See Also catalog files

ADCP Profile, 7-99, 7-100 Cross Sections and Volumes, 6-25 Cross Sort program, 4-40, 4-41 Data Adjustments, 7-71 definition, 9-2 Hyplot Max, 6-2 Hyscan, 5-21 Latency Test, 2-142 Merge XYZ, 7-83 Pathfinder, 7-82 Seabed Statistics, 7-114, 7-115, 7-117 Side Scan Survey, 5-21 Single Beam Max, 4-8 Sort program, 4-38, 4-39 Statistics program, 7-122 Survey, 3-7, 3-61 TIN Model program, 6-67, 6-68, 6-69, 6-94

logging status ADCP Logger, 7-85, 7-88 Side Scan Survey, 5-7 Survey, 3-17, 7-88

longitude, 9-25 LPT ports. See Hardware program:settings:parallel

connections Manual Entry program


Mapper, 4-37, 4-42–4-47 overview, 1-45, 4-42 procedure, 4-43 , 4-47 settings

color, 4-45 data selection, 4-44 matrix, 4-46

statistics, 4-47 Matrix 3DTV. See 3D Terrain Viewer:Matrix 3DTV Matrix Editor

example, 2-153 overview, 1-41, 2-151 procedure, 2-152 settings, 2-152

matrix files. See Also MTX files color settings

Dredgepack, 8-16 Hyplot Max, 6-9 Scheme Builder, 3-10

xviii HYPACK® MAX Manual 1/05

Survey, 3-44 creating

Matrix Editor, 2-152 Multibeam Max, 8-12 TIN Model, 6-89 XYZ to MTX program, 2-155

displaying Dredgepack, 8-2, 8-9 Hypack Max, 2-153, 2-156 Side Scan Survey, 5-10, 5-11, 5-16 Survey, 3-12, 3-13, 3-24

editing Matrix Editor, 2-156 Survey, 3-42

erasing depths, 3-40 filling

Dredgepack, 8-15 Mapper, 4-44 Multibeam Max, 8-12 Scheme Builder, 3-10 Survey, 3-10, 3-40–3-44 TIN Model program, 8-10 XYZ to MTX program, 2-154

legends Dredgepack, 8-16 Survey, 3-44

loading 3D Terrain Viewer, 7-138 Dredgepack, 8-13, 8-15 Hyplot Max, 6-2 Mapper, 4-43 Side Scan Survey, 5-16 Survey, 3-2, 3-15, 3-40 TIN Model program, 6-90, 6-94

matrix type, 5-17 naming

Matrix Editor, 2-152 XYZ to Matrix program, 2-155

overview, 1-38, 2-151 plotting, 6-2, 6-9 positioning

Multibeam Max, 8-12 XYZ to MTX program, 2-155

saving Dredgepack, 8-17 Matrix Editor, 2-152, 2-156 Survey, 3-45

Scheme Builder, 3-10 seabed identification

TIN Model, 1-14, 6-89 selecting. See matrix files:loading settings

Hyplot Max, 6-9 Mapper, 4-46 Matrix Editor, 2-152 Scheme Builder, 3-10 TIN Model program, 6-89 XYZ to MTX program, 2-155

show differences, 8-15 show dredge data, 8-13 show original data, 3-42, 8-15 soundings in. See matrix files:filling

unloading Dredgepack, 8-13 Side Scan Survey, 5-16 Survey, 3-40

update basis Dredgepack, 8-14 Survey, 3-41

warning editing filled matrix, 2-156

matrix options dialog Dredgepack. See Dredgepack:settings:matrix options

Memory Output program overview, 1-43, 3-50 procedure, 3-51 settings

data selection, 3-51 output format, 3-52

Memory Viewer , 3-49 DOP history, 3-49 overview, 1-43, 3-49 procedure, 3-49 satellite history, 3-50 vessel information, 3-49

mercator projections. See projections:mercator Merge XYZ

overview, 7-83 procedure, 7-83

MET files. See metadata metadata

creating, 7-75, 7-78 saving, 7-79

Metadata program overview, 1-47, 7-74 procedure, 7-75 saving the project, 7-79 settings

property dialogs, 7-76 symbols, 7-76 tree view, 7-75

Metric File Converter overview, 1-47, 7-79 procedure, 7-79

mobiles. See towfish model types

3D Shape Editor, 7-21 TIN models, 6-74

mosaic definition, 5-20

mosaics. See Hyscan:windows:mosaic view Motion Reference Units. See MRUs motion sensors. See MRUs movie controls. See 3D Terrain Viewer:movies MRUs (Motion Reference Units). See Also heave, pitch,

roll multibeam acoustics, 9-35 overview, 2-123 settings

Hardware, 2-82, 2-123 Single Beam Max, 4-18, 4-19

MST files Hyscan, 5-19

HYPACK® MAX Manual 3/03 • xix

MTX files. See Also matrix files 3D Terrain Viewer, 7-138 definition, 9-2 Dredgepack, 8-9 Hyplot Max, 6-2 Mapper, 4-38 Matrix Editor, 1-38, 2-151 Scheme Builder, 3-10 Side Scan Survey, 5-10, 5-11, 5-16 Survey, 3-39 TIN Model program, 6-89, 6-94 XYZ to MTX program, 1-48, 2-154, 8-10

Multibeam Max overview, 1-44

multiple regression formulas. See geodetic parameters:multiple regression formulas

multiple transducers offsets

Hysweep Hardware, 2-111 Transducer Offsets program, 2-93

National Imagery and Mapping Agency. See geodetic parameters:NIMA

navigation parameters, 3-3 navigation station editor. See Hardware

program:settings:stations navigation stations

adding, 2-79, 2-94 editing, 2-79, 2-96

navigation system Hardware, 2-97

networks broadcasting data, 3-53 broadcasting Survey windows, 3-24 connecting

Hardware, 2-86 copying projects, 1-24 duplicating projects, 1-24 exporting data

3D Shape Editor, 7-45 project management, 1-21, 1-23 system requirements, 1-3

NIMA. See geodetic parameters:NIMA NMEA message strings, 2-99, 2-100, 2-104

exporting, 3-55 NMEA Output program


NOAA tides importing to Manual Tides program, 7-8 NOAA tide book, 7-5

nodes Advanced Channel Design, 7-46 KTD files, 7-15

north arrow Hyplot Max, 6-17 Survey, 3-15

object editor Channel Condition Reporter, 7-127

object files creating

ADCP Profile, 7-105 Cross Sections and Volumes, 6-29

loading Cross Sections and Volumes, 6-29

saving ADCP Profile, 7-105 Cross Sections and Volumes, 6-30

object properties 3D Shape Editor, 7-31–7-41

visibility, 7-37 rotation, 7-33 translation, 7-32

Odometer overview, 1-43, 3-56 procedure, 3-56

off line tolerance, 7-81 offsets

Boat Shape Editor-anchors, 3-29 calculating

Latency Test, 2-141 calculating offset adjustments

Latency Test, 2-141–2-144 correcting data

Data Adjustments program, 2-145, 7-72 Multibeam Max, 2-146 Single Beam Max, 2-146, 4-16

creating Line Editor, 2-40

displaying Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15 Survey, 3-17

editing Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15

Hardware latency, 9-38

Hardware program, 2-89–2-94 forward, 2-89, 2-90, 2-91 height, 2-91, 2-114, 2-126 latency, 2-79, 2-89, 2-91, 2-103 pitch, 2-79, 2-92 roll, 2-79, 2-93 starboard, 2-89, 2-90, 2-91 yaw, 2-79, 2-92

Hysweep Hardware latency, 9-38 pitch, 2-92 roll, 2-93 yaw, 2-92

measuring, 2-90, 2-137 mobiles, 2-128–2-130 multibeam acoustics effects, 9-36 multiple transducers, 4-10

Hysweep Hardware, 2-111 Transducer Offset program, 2-93

Side Scan Hardware latency, 5-5

survey lines. See survey lines:creating:Line Editor towfish, 2-128–2-130 Transducer Offsets program, 2-93

latency, 2-93 offsets dialog. See Hardware program:settings:offsets operating system, 1-2

xx HYPACK® MAX Manual 1/05

orientation area map

Channel Condition Reporter, 7-127 Hypack Max, 1-7, 1-8 Survey, 3-14

boat. See heading overdredge bases, 6-35, 6-43 overdredge limit, 6-26, 6-40, 6-41, 6-43, 6-99 overlay

Cross Sections and Volumes, 6-25 Export, 6-108 Hyplot Max, 6-5, 6-11 Seabed Statistics, 7-118 Single Beam Max, 4-34 TIN Model, 6-82, 6-87

parallel event boxes connect settings, 2-122 device setup, 2-122 overview, 2-121

parallel hardware connections, 2-85 parallel helmsman displays. See helmsman

displays:parallel Patch Test

overview, 1-42, 1-44 Pathfinder program


setup dialog, 7-82 PC. See hardware:PC system requirements Philadelphia method

box templates, 6-28 calculation method comparison, 6-40 setup, 6-35 volumes calculations

Cross Sections and Volumes, 6-49 TIN Model, 6-67, 6-69, 6-71, 6-78, 6-95

pitch (camera) camera controls

3DTV, 7-166 pitch (devices)

correcting data Data Adjustments program, 7-72 Multibeam Max, 2-146

displaying Multibeam Max, 2-146 Single Beam Max, 4-15

editing Multibeam Max, 2-146 Single Beam Max, 4-15

offsets Hardware, 2-79, 2-92 Hysweep Hardware, 2-92

pitch (vessel) correcting data

Single Beam Max, 4-18–4-20 definition, 9-36 displaying

ADCP Logger, 7-89 Memory Viewer, 3-49 Single Beam Max, 4-25 Survey, 3-17, 3-49

measuring. See MRUs planned line files. See LNW files, survey lines playback

Side Scan Survey, 5-6 Side Scan Survey, 5-7

PLN files 3D Terrain Viewer, 7-151 Channel Design Max, 2-62 definition, 9-2 Dredgepack, 8-3 overview, 1-38 Survey, 3-20

Plotting Sheet Editor example, 2-150 overview, 1-42, 2-148 procedure, 2-148

plotting sheet files color settings, 2-148 creating

Plotting Sheet Editor, 2-148 editing, 2-151

Plotting Sheet Editor, 2-151 overlaying

Cross Sort, 4-40 overview, 1-39 plotting


positioning cursor method, 2-149 spreadsheet method, 2-149

saving Plotting Sheet Editor, 2-149, 2-151

selecting Cross Sort, 4-41 Hyplot Max, 6-2

sizing cursor method, 2-149 spreadsheet method, 2-149

plotting sheet information, 6-3, 6-20 plotting sheets

DXF format, 6-20 exporting

Hyplot Max, 6-20, 6-21 PLT files

Cross Sort, 4-38 definition, 9-2 Hyplot Max, 6-2 Plotting Sheet Editor, 2-148

point editing Single Beam Max, 4-32

polysection TIN models, 6-77 POS. See survey files-raw:POS data positions (3DTV elements)

camera, 7-167 lighting, 7-147, 7-148 water surface, 7-149

positions (boats). See Also follow boat, cross track error, GPS, heading, events, tracklines

correcting Project Converter, 2-36

displaying

HYPACK® MAX Manual 3/03 • xxi

ADCP Logger, 7-89 Side Scan Survey, 5-8, 5-10, 5-11 Single Beam Max, 4-28 Survey, 3-13, 3-16, 3-18, 3-24, 3-27

Dredgepack, 8-13 data display window. See positions (boats):Survey:data

display window left-right indicator, 8-3

Hyplot Max, 6-23 Pathfinder, 7-82 Side Scan Survey, 5-8, 5-18 Single Beam Max, 4-22 Survey

area map, 3-13, 3-24, 3-27 data display window, 3-17, 3-24 left-right indicator, 3-16, 3-24 Memory Viewer, 3-49 NMEA Output, 3-56 target properties, 3-35

positions (charts). See orientation:area map, geodesy, geodetic parameters

Chart program, 7-60, 7-61 positions (cursor)

ADCP Profile, 7-106 Channel Condition Reporter, 7-127 displaying

Hyscan, 5-22 Hypack Max, 1-7, 1-19 Hysweep Survey, 5-9 Side Scan Survey, 5-9, 5-18 TIN Model program, 6-78

positions (devices). See Also offsets:Hardware, offsets:Hysweep Hardware,offsets:Transducer Offsets program, towfish:settings

anchors, 7-18 navigation stations, 2-94, 2-95, 2-96, 7-72

positions (files) Advanced Channel Design, 7-47 border files-Border Editor, 2-58 channel information

Channel Design Max, 2-64 chart features

Chart program, 7-61, 7-64, 7-65 charts

DGW Editor, 7-67 Echogram program, 7-65 matrix files

Matrix Editor, 2-152, 2-153, 2-156 plotting sheet files-Plotting Sheet Editor, 2-149, 2-151 sample coordinates-Seven Parameter Datum

Transformations program, 2-27 shoals

Channel Condition Reporter, 7-127, 7-135 Shore Manual, 7-66 survey files-raw, 2-104 survey lines

Channel Design Max, 2-62, 2-63, 2-64, 2-74 Line Editor, 2-38, 2-42

targets Side Scan Survey, 5-17, 5-18 Survey, 3-37, 3-38, 3-39 Target Editor, 2-147

target properties, 5-18 positions (soundings)

ADCP Logger, 7-88, 7-103 ADCP Profile, 7-102 Cross Sort, 4-38 Data Adjustments, 7-72 Echogram program, 7-65 Export, 6-113, 6-115 Hyplot Max, 6-23 Manual Entry, 7-73 Mapper, 4-38, 4-45 Pathfinder, 7-82 Single Beam Max

advanced read parameters, 2-124, 4-15, 4-18 display, 4-22, 4-27 merging digitized data, 7-65

Sort, 4-38 Survey

water's edge, 3-38 processing sequences

single beam data, 4-3 Project Converter

overview, 1-47, 2-36 procedure, 2-37 report, 2-37 settings, 2-37

project depth Channel Condition Reporter, 7-131 Cross Sections and Volumes, 6-43

project files compressing. See Compress Project disabling, 4-1

Export, 6-105 Hypack Max, 1-27 Hyplot Max, 6-2

displaying. See project files:enabling drawing. See project files:enabling, loading enabling, 4-1


geodesy conversion, 2-36 loading, 1-27, 4-1 unloading, 1-28, 4-1

project information

Cross Sections and Volumes, 6-31 , 3-49 Single Beam Max, 4-16

, 3-49

input, 3-5, 3-33 printing

ADCP Profile, 7-107 , 3-6

project manager copying projects, 1-24 deleting projects, 1-26 directory path, 1-23 duplicating projects, 1-24 new projects, 1-22 opening projects, 1-23 overview, 1-21

xxii HYPACK® MAX Manual 1/05

restoring projects, 1-26 warnings

overwriting data, 1-25 projection parameters, 2-13, 2-81 projections, 2-20

conical, 9-31 mercator, 9-28 oblique mercator, 9-31 transverse mercator, 9-29

projects copying, 1-24 creating, 1-22 deleting, 1-26 directory path, 1-23 directory structure, 1-20 duplicating, 1-24 local, 1-22 network, 1-22 network capability, 1-23 opening, 1-23 removing, 1-26 restoring, 1-26 saving, 1-25 viewing, 1-22

QC tests Beam Angle Test, 1-44 Single Beam Test, 1-44

quality control tests. See QC tests quality data. See survey files-raw:quality data

saving target files, 3-35

quality filter Single Beam Max, 4-17

quick mark Side Scan Survey, 5-18 Survey, 3-33

r.000 files ADCP Logger, 7-84

RAM (Random Access Memory), 1-2 Random Access Memory. See RAM (Random Access

Memory) range radius, 3-27 range-azimuth positioning, 2-82, 2-94 range-range positioning, 2-82, 2-94, 2-95 RAW. See survey files-raw:RAW data raw directory, 1-20 raw format files. See Also survey files-raw, data files

definition, 9-4 Dredgepack, 8-13 Export, 6-109 Hypack Max, 4-1 overview, 1-28 Side Scan Survey, 5-6 Single Beam Max, 4-8, 4-9, 4-35 Survey, 3-6–3-7

reaches Channel Condition Report, 7-135 creating. See Channel Condition

Reporter:procedure:creating reaches, Cross Sections and Volumes:settings:channel plan

volumes calculations, 6-63 read filters

Single Beam Max, 4-14 read parameters

Latency Test. See Latency Test:settings:read parameters record basis, 2-79, 2-84 redraw, 1-27 reference ellipsoids. See Also ellipsoids

Geodetic Parameters, 2-13, 2-14 separation from chart datum, 7-13

reflection. See acoustics theory:beams:reflection Reformat program. See Export program, Export program refraction. See acoustics theory:beams:ray bending refresh. See redraw registering charts. See charts:registering Remap


reports ADCP Profile

discharge reports, 7-106, 7-108 Channel Condition Reporter, 7-135, 7-136 cross check statistics, 7-123, 7-124 Cross Sections and Volumes, 6-37

gap report, 6-34 top of bank report, 6-34 volumes, 6-38

FGDC compliant. See Metadata program Hyscan

activity log, 5-23 Metadata, 7-74 Project Converter, 2-37 Seven Parameter Datum Transformation program, 2-32 show lines report, 1-31, 1-39 TIN Model program, 6-93

roll (devices) correcting data

Data Adjustments program, 7-72 Multibeam Max, 2-146

displaying Multibeam Max, 2-146 Single Beam Max, 4-15

editing Multibeam Max, 2-146 Single Beam Max, 4-15

offsets Hardware, 2-79, 2-93 Hysweep Hardware, 2-93

roll (vessel) correcting data

Single Beam Max, 4-18–4-20 definition, 9-36 displaying

ADCP Logger, 7-89 Memory Viewer, 3-49 Single Beam Max, 4-25 Survey, 3-17, 3-49

measuring. See MRUs rounding options


ROV's. See: towfish RTK positioning. See GPS:positioning modes RTK Tides. See tide corrections:RTK tide corrections

HYPACK® MAX Manual 3/03 • xxiii

RXW files. See Also Roxann program definition, 9-3 Hypack Max, 1-15

S-57 charts day/night colors, 3-11 display options, 1-17 information query, 1-7 overview, 1-36

Savannah method volumes calculations, 6-47 SB2 records, 2-112, See Also survey files-raw scale factor, 2-20, 2-23 Scheme Builder

color settings chart elements, 3-9 survey elements, 3-9 window elements, 3-12

overview, 3-7 procedure, 3-8 settings, 3-7

day/night colors, 3-11 fonts, 3-11 matrix colors, 3-10

text settings, 3-11 schemes. See Scheme Builder SCM files

Scheme Builder, 3-8, 3-9 Survey, 3-8

screen controls-Hypack Max, 1-7 seabed identification, 7-113

Hypack Max, 1-14 Hyplot Max, 6-8 , 4-47 matrix files, 1-14, 6-89 Seabed Statistics, 7-113, 7-114, 7-115, 7-119 Single Beam Max, 4-8, 4-23, 4-28 TIN Model, 6-73, 6-89

displaying

Hypack Max, 7-121 Seabed Statistics, 7-116 Survey, 7-121

, 4-46 modifying

Seabed Statistics, 7-114 Seabed Statistics, 7-113

seabed identification numbers assigning

Seabed Statistics, 7-116, 7-119 exporting

Seabed Statistics, 7-120 seabed identification squares

creating Seabed Statistics, 7-114

saving Seabed Statistics, 7-114

Seabed Statistics exporting to text, 7-120 overview, 1-48, 2-112, 7-113 procedures

creating an ID square, 7-114 displaying statistics, 7-117 editing statistics, 7-119

loading calibration points, 7-115 loading data files, 7-115

settings bottom classifications, 7-114, 7-116 calibration points, 7-114, 7-115 colors, 7-114, 7-116 seabed identification colors, 7-114 seabed identification numbers, 7-116 seabed identification square, 7-114

warnings data inclusion, 7-117

search criteria Single Beam Max, 4-30

search radius-Statistics program, 7-123 section lines

ADCP Profile, 7-104 Cross Sections and Volumes, 6-25, 6-37 Statistics program, 7-122 TIN Model, 6-67

sections-creating TIN Model program, 6-67

semi-major axis, 2-20, 9-24 semi-minor axis, 9-24 serial hardware connections. See Hardware

program:settings:serial connections,Hysweep Hardware program:settings:serial connections

serial hardware connections-testing, 2-87, 5-4 sessions

creating. See Cross Sections and Volumes:procedure saving. See Cross Sections and Volumes:settings:saving

settings 3D Shape Editor

advanced objects, 7-26, 7-27, 7-29 attachment points, 7-30 basic objects, 7-26 colors, 7-22, 7-35, 7-38 default color, 7-35 display options, 7-21 dredge arms, 7-30 faces, 7-38 groups, 7-41–7-44 mining lamp, 7-22 model types, 7-21 names, 7-40, 7-43 object properties, 7-31–7-41, 7-40, 7-43 rotation, 7-33 shading, 7-22 textures, 7-36, 7-38 translation, 7-32 transparency, 7-38 vessel origin, 7-30 visibility, 7-37 windows, 7-38

3D Terrain Viewer AVI, 7-169 boat shapes, 7-153 buffering, 7-171 camera position, 7-158, 7-159, 7-162 channel lines, 7-151 colors, 7-146, 7-149, 7-152 dredging equipment, 7-156 dynamic lighting, 7-147

xxiv HYPACK® MAX Manual 1/05

flight modes, 7-139, 7-143 frame rate, 7-171 GUI response, 7-170 model type, 7-145 movie controls, 7-168 survey lines, 7-151 targets, 7-158 terrain settings, 7-140 vertical scale, 7-148 water surface, 7-149

ADCP Logger data display options, 7-97 heading, 7-98 output format, 7-98 plan file, 7-87 tabular view options, 7-97 units, 7-96 velocity profile windows, 7-97 velocity reference, 7-96

ADCP Profile color settings, 7-103 cross section graph, 7-103 discharge/velocity data, 7-102 object files, 7-105 print options, 7-106 survey data, 7-102 survey lines, 7-104 view options, 7-103

ADCP to DXF:, 7-110 Analog Side Scan, 5-3 Channel Condition Report

turning basins, 7-130 Channel Condition Reporter

colors, 7-131 Channel Design Max

channels, 2-63, 2-65, 2-69 curved channel lines, 2-69 offset toes, 2-65 side slopes, 2-65, 2-68 survey lines, 2-69 toe shifts, 2-65 top of bank, 2-68 turning basins, 2-66

Cross Sections and Volumes box templates, 6-51 channel templates, 6-27, 6-34, 6-49 color settings, 6-30, 6-36 cross section graph, 6-36 print options, 6-37 view options, 6-36

Dredgepack alarms, 8-9 boat shapes, 8-7 colors, 8-19

Export program custom formats, 6-114 DGN origin and units, 6-108 DXF and DGN parameters, 6-107 DXF/DGN planned line parameters, 6-108 DXF/DGN shoreline parameters, 6-109 DXF/DGN sounding parameters, 6-109 DXF/DGN target file parameters, 6-111

DXF/DGN tic parameters, 6-111 DXF/DGN tracklines parameters, 6-112 input options, 6-107 user-defined formats, 6-114 XYZ parameters, 6-113

Geodetic Parameters program. See geodetic parameters Hardware program

connect, 2-78, 2-85, 2-86, 2-119 device setup, 2-79, 2-80 disabling devices, 2-96 dredge hoppers, 2-136 driver setup, 2-79, 2-83 editing, 2-97 heading devices, 2-125 latency, 2-79, 2-89, 2-91, 2-103, 9-38 MRUs, 2-82 network connections, 2-86 offsets, 2-79, 2-111 output to a file, 2-87 parallel connections, 2-85, 2-119 parallel event box, 2-122–2-123 parallel helmsman displays, 2-118–2-119 pitch, 2-79 record basis, 2-79, 2-84 saving, 2-79, 2-96, 2-130 serial connections, 2-86, 2-87, 2-121 stations, 2-79, 2-94, 2-96 towfish, 2-127–2-131, 2-136 USB connections, 2-120 USB helmsman displays, 2-119

Hypack Max colors, 1-8 depth display, 1-13 display options, 1-7 grid display, 1-12 tools, 9-43 trackline display, 1-15

Hyplot Max, 6-2 color settings, 6-17 colors, 6-4 export to DXF, 6-20 matrix, 6-9 planned lines, 6-22 plotting, 6-2 plotting methods, 6-20 printing, 6-2 soundings, 6-7, 6-22 targets, 6-10, 6-23 title blocks, 6-11 tracklines, 6-23

Hyplot Max program DXF conversion options, 6-21

Hyscan bitmaps, 5-30 colors, 5-24 mosaics, 5-31 print, 5-29 print options, 5-30 threshold, 5-28 towfish altitude, 5-28 towfish altitudes, 5-26, 5-27 view options, 5-23, 5-24

HYPACK® MAX Manual 3/03 • xxv

view ratio, 5-24 Hysweep Hardware

latency, 9-38 offsets, 2-89, 2-111 offsets-multiple transducer, 2-111

Hysweep Survey colors, 5-12 display options, 5-13 gain, 5-13 side scan signal window, 5-12

language Hypack Max, 1-20 program modules, 1-20

Latency Test read parameters, 2-142

Mapper color, 4-45 data selection, 4-44 matrix files, 4-46

matrix files Matrix File Editor, 2-152 Scheme Builder, 3-10 Survey, 3-40–3-44

Memory Output program data selection, 3-51 output format, 3-52

Project Converter, 2-37 Scheme Builder, 3-7

day/night colors, 3-11 matrix files, 3-10

Seabed Statistics bottom classifications, 7-114, 7-116 calibration points, 7-114, 7-115 colors, 7-114, 7-116 seabed identification colors, 7-114, 7-116 seabed identification numbers, 7-114, 7-116 seabed identification square, 7-114

Side Scan Hardware connect, 5-2 driver setup, 5-2 hull-mounted devices, 5-5 offsets, 5-5 saving, 5-1 serial connections, 5-3 towed devices, 5-5

Side Scan Survey alarms, 5-7 colors, 5-12 display options, 5-13 gain, 5-13 logging options, 5-16 matrix options, 5-16 side scan coverage map window, 5-11 side scan water fall window, 5-12 side scan waterfall, 5-8

Single Beam Max advanced read parameters, 2-124 color settings, 4-21 read parameters, 4-8 sound velocity corrections, 4-4, 4-10, 4-13 tide corrections, 4-10, 4-11

Survey

boat features, 3-24–3-29 broadcast, 3-24 color, 3-7 events. See events:settings, See events:settings left/right indicator, 3-16–3-17 logging options, 3-5, 3-58, 3-62 navigation parameters, 3-3 network, 3-53 print configuration, 3-65 profile window, 3-19 towfish, 2-126–2-134

TIN Model program color settings, 6-73 inital data, 6-68 shades, 6-73 view options, 6-71 views, 6-74–6-78, 6-74–6-78

Title Block Editor, 6-13–6-15 Transducer Offsets program

latency, 2-93 offsets-multiple transducer, 2-93

Window Viewer, 3-25 Seven Parameter Datum Transformation program

overview, 2-27 procedure, 2-27 report, 2-32 settings

coordinate configuration, 2-29 coordinate samples, 2-28 coordinate type, 2-29 transform type, 2-29

shapes. See boat shapes Shared Memory, 1-43, 3-48–3-57

Echosounder Display, 3-54 Graphical Motion Reference Unit, 3-57 heading/speed indicator, 3-57 Memory Output, 3-50, 3-53 Memory Viewer, 3-49 Nmea Output, 3-55 Odometer, 3-56

shoals Channel Condition Reporter, 7-127, 7-133, 7-135 Cross Sort program, 4-41 Dredgepack, 8-14

Shore Manual program editing the object list, 7-67 overview, 7-66 printing object list, 7-67 procedure, 7-67

shorelines digitizing

Chart program, 7-63 show lines report

catalog files, 1-31 LNW files, 1-39

SHP files Boat Shape Editor, 7-18, 7-19 definition, 9-3 Survey, 3-28

Side Scan Hardware COM Test, 5-4 device drivers, 9-24

xxvi HYPACK® MAX Manual 1/05

overview, 5-1 procedure, 5-1 selecting devices, 5-1, See Also device drivers settings

connect, 5-2 driver setup, 5-2 editing, 5-6 hull-mounted devices, 5-5 offsets, 5-5 saving, 5-1 serial connections, 5-3 towed devices, 5-5

side scan signal displaying


Side Scan Survey keyboard commands, 5-15 logging status, 5-7 overview, 5-6 playback, 5-7, 5-18 settings

alarms, 5-7 colors, 5-12 display options, 5-13 gain, 5-13 logging options, 5-16 matrix options, 5-16 side scan coverage map window, 5-11 side scan water fall window, 5-12 side scan waterfall, 5-8

windows, 5-7 coverage map window, 5-16 device controls, 5-15 main, 5-7 side scan coverage map, 5-17 side scan coverage map window, 5-10 side scan signal window, 5-9 side scan waterfall window, 5-8

side slopes Channel Design Max, 2-62, 2-63, 2-68

simulation 3D Shape Editor, 7-26

simulations Side Scan Survey, 5-6, 5-18

Single Beam Max exporting to text, 4-35 overview, 1-44 procedure, 4-7 settings

advanced read parameters, 2-124, 4-18 color settings, 4-21 display options, 4-25–4-30 read parameters, 4-8 search and filter options, 4-30 sound velocity corrections, 4-4, 4-10, 4-13 tide corrections, 4-10, 4-11

statistics, 4-31 file information, 4-31 offline statistics, 4-31

windows heave window, 4-24

pitch, roll and heading window, 4-25 profile window, 4-21 shell, 4-7 sound velocity profile window, 4-23 spreadsheet window, 4-23 survey window, 4-22 tide and draft corrections window, 4-24

Single Beam Test overview, 1-44

SIX files Seabed Statistics, 7-114 Seabed Statistics program, 7-113

snap to line, 6-9 Snell's Law, 9-33 software installation, 1-4 solid TIN models, 6-75, 6-76 sort directory, 1-20 Sort program, 4-37

overview, 1-45, 4-38 procedure, 4-39 statistics, 4-40

sound velocity cast, 9-34 sound velocity corrections, 1-39, 9-35

applying Multibeam Max, 1-44 Single Beam Max, 4-10, 4-13 Survey, 3-4

correcting, 7-70 displaying

Single Beam Max, 4-23, 4-28 Sound Velocity program, 4-5


graphing Sound Velocity program, 4-5, 4-23

importing Sound Velocity program, 4-5

loading Single Beam Max, 4-10, 4-13 Sound Velocity program, 4-4

saving, 4-5, 4-7 Sound Velocity program. See Also sound velocity

corrections corrections table, 4-5 overview, 1-45, 4-4 procedure, 4-4

Sounding Adjustment program overview, 1-45, 7-70 procedure, 7-70

Sounding Reduction program overview, 1-45

sounding selection programs, 1-44, 4-3 comparison, 4-37 Cross Sort, 1-45 Mapper, 1-45 Sort program, 1-45 Sounding Reduction program, 1-45

soundings. See depths, See depths stand alone mode. See GPS:positioning modes standard Hypack volumes calculations, 6-43 starboard offsets. See offsets:Hardware

program:starboard

HYPACK® MAX Manual 3/03 • xxvii

start line gate, 3-3, 3-60, 3-61 starting line, 3-3, 3-60 stations. See navigation stations statistics

calculating Seabed Statistics, 7-119

cross check calculating, 7-122 displaying, 7-123, 7-125 printing, 7-124, 7-125

displaying Seabed Statistics, 7-119

distance surveyed. See reports:show lines report Hyscan

calculating, 5-32 displaying, 5-32

Mapper, 4-47 quality data

survey files, 2-104 target files, 3-35

Seabed Statistics, 7-119 E1 and E2 distribution, 7-118 material statistics, 7-118 seabed ID square to material comparison, 7-118

Single Beam Max, 4-31 file information, 4-31 offline statistics, 4-31

Sort Program, 4-40 Statistics program, 7-122 survey line lengths. See reports:show lines report TIN Model

grid differences, 6-92 TIN differences, 6-92

Statistics program cross check statistics graph, 7-122 cross check statistics report, 7-122 example, 7-125 graph, 7-123 keyboard commands, 7-124 overview, 1-48, 7-122 procedure, 7-122 report file, 7-123 settings

input information, 7-122 view options, 7-123

text report, 7-124 STR files

TIN Model, 6-67 strikes

Mapper, 4-45 subgrade. See overdredge limit supergrade, 6-26, 6-43, 6-44 Survey

color settings, 3-44, See Also Scheme Builder:color settings keyboard commands, 9-6 overview, 3-1 plotting data, 3-63 settings

alarms, 3-4, 3-17, 3-23 area map, 3-13–3-15 boat features, 3-24–3-29 broadcast, 3-24, 3-53

color, 3-7 data display, 3-17–3-19, 3-46 left/right indicator, 3-16–3-17 logging options, 3-5, 3-58, 3-62 matrix files, 3-40, 3-44 navigation parameters, 3-3 network, 3-53 print configuration, 3-65 profile window, 3-19 towfish, 2-126–2-134 window configuration, 3-13

warnings logging over a network, 1-23

windows alarms, 3-12 area map, 3-12, 3-26 data display, 3-12 device windows, 3-12 helm area map, 3-12, 3-26 helm left-right indicator, 3-12 left-right indicator, 3-12 profile window, 3-12, 3-19–3-21, 3-29

survey files-edited. See Also data files correcting

Metric File Converter, 7-79 Single Beam Max, 4-11, 4-13, 4-16 Sounding Adjustment program, 7-70 tide corrections, 4-11

disabling, 1-27 Hypack Max, 1-27 Hyplot Max, 6-2

displaying. See Also survey files-edited:enabling ADCP Profile, 7-104 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-7, 4-9 Statistics program, 7-123 TIN Model, 6-71


enabling Hypack Max, 1-28 Hyplot Max, 6-2

exporting Hyplot Max, 6-22

loading ADCP Profile, 7-99 Cross Sections and Volumes, 6-25 Cross Sort program, 4-41 Hyplot Max, 6-2 Mapper, 4-44 Pathfinder, 7-82 Remap, 7-80 Seabed Statistics, 7-114, 7-115, 7-119 Single Beam Max, 4-8, 4-9 Sort program, 4-38, 4-39 Statistics program, 7-123

merging All Format files, 1-30 overlaying

Cross Sections and Volumes, 6-25 Seabed Statistics, 7-118

overview, 1-28 plotting

xxviii HYPACK® MAX Manual 1/05

Hyplot Max, 6-7 saving

Manual Entry program, 7-73 Single Beam Max, 4-9

sorting Cross Sort, 4-40, 4-42 Sort program, 4-38

tide corrections, 4-11 unloading, 1-28

Hyplot Max, 6-2 survey files-raw, 3-6, See Also data files, raw format files

content dual frequency (EC2), 2-111 multibeam (SB2), 2-112 multiple transducer (ECM), 2-111 single beam (EC1), 2-111

correcting. See Also sound velocity corrections, tide corrections, draft/squat corrections

heave, pitch and roll corrections, 4-18–4-20 Single Beam Max, 4-11 tide corrections, 4-11

directory structure, 3-6 disabling, 1-27


displaying. See Also survey files-raw:enabling Echosounder Display, 3-54 Hypack Max, 1-27, 4-1 Memory Viewer, 3-49 NMEA Output, 3-55 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-7, 4-9 Survey, 3-13, 3-19, 3-22, 3-39

editing overview, 4-3 Single Beam Max, 4-7

enabling, 1-28 Hyplot Max, 6-2

exporting NMEA Output, 3-55 Shared Memory Output, 3-50

loading Hypack Max, 1-27, 4-1 Hyplot Max, 6-2 Hyscan, 5-21, 5-31 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-8, 4-9

logging Side Scan Survey, 5-6, 5-15, 5-16, 5-21 Survey, 2-108, 3-6–3-7, 3-58, 3-62–3-63

naming, 3-6 overlaying

Seabed Statistics, 7-118 overview, 1-28 playback

Side Scan Survey, 5-6, 5-18 plotting, 3-63 POS data, 2-104 printing

Survey, 3-65 QUA data, 2-104 quality data, 2-104

RAW data, 2-104 saving

Compress Project, 4-3 Dredgepack, 8-13 Survey, 3-7, 3-40 to matrix, 3-45, 8-17 to XYZ format, 3-45, 8-17

simulator Side Scan Survey, 5-18

tide corrections, 4-11 unloading, 1-28, 4-1

Hyplot Max, 6-2 survey files-sorted. See Also data files, all format-sorted,

XYZ files clipping

Hypack Max, 4-36 TIN Model, 6-82

correcting Metric File Converter, 7-79

disabling, 1-27 Hypack Max, 1-27 Hyplot Max, 6-2

displaying. See Also survey files-sorted:enabling:Hypack Max

ADCP Profile, 7-104 Mapper, 4-44 TIN Model, 6-71

enabling Hypack Max, 1-28 Hyplot Max, 6-2


loading Cross Sections and Volumes, 6-25 Hyplot Max, 6-2 Remap, 7-80 Seabed Statistics, 7-114 TIN Model, 6-68

merging All Format files, 1-30 overview, 1-29 plotting

Hyplot Max, 6-7 saving

Cross Sort, 4-42 Mapper, 4-44 Sort program, 4-38, 4-40

unloading, 1-28 Hyplot Max, 6-2

survey line files. See LNW files, survey lines survey lines

appending files, 2-55 clipping

3D Terrain Viewer, 7-153 Line Editor, 2-57–2-59

creating Channel Design, 2-39 Channel Design Max, 2-62 Export to Line File program, 2-76 Line Editor, 2-41, 2-42–2-53 overview, 2-38 Pathfinder, 7-82 Survey, 3-39

HYPACK® MAX Manual 3/03 • xxix

curved lines, 2-39 displaying

3D Terrain Viewer, 7-151 ADCP Profile, 7-104 Channel Design Max, 2-73 Dredgepack, 8-2 Hypack Max, 2-146, 2-148, 2-152 Line Editor, 2-45, 2-48, 2-60 Side Scan Survey, 5-11 Single Beam Max, 4-22 Survey, 3-12, 3-13, 3-24 TIN Model program, 6-72, 6-76

editing Channel Design Max, 2-63, 2-64, 2-65, 2-72 Line Editor, 2-45, 2-49 Pathfinder, 7-83


labeling 3D Terrain Viewer, 7-151 Channel Design Max, 2-71 Export to Line File, 2-77 Hyplot Max, 6-10, 6-22 Line Editor, 2-43

left-right indicator, 3-16 loading

3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46 Channel Design Max, 2-63 Cross Sections and Volumes, 6-27 Hypack Max, 2-146, 2-148, 2-152 Line Editor, 2-49 Remap, 7-80 TIN Model, 6-79

multisegment lines, 3-5, 3-62 naming

Channel Design Max, 2-63, 2-71 DXF to LNW conversion, 2-78 Line Editor, 2-44

navigating, 3-58 offsets, 2-42–2-53

centerline, 2-41 extend tab, 2-49 parallel, 2-40 radial, 2-40 search, 2-41 stairstep, 2-41

overview, 2-39 plotting


previewing Channel Design Max, 2-73 Line Editor, 2-43, 2-45, 2-46, 2-48, 2-55, 2-60

saving, 1-39 Channel Design Max, 2-63 Export to Line File, 2-77 Line Editor, 2-44, 2-46, 2-48, 2-57

selecting-Survey, 3-4, 3-5, 3-58, 3-62 settings

3D Terrain Viewer, 7-151 automatic leg switching, 3-5, 3-62

labels, 3-65, 6-10, 6-22 line extension, 2-70 line increment, 3-4 lines at center turn, 2-72 lines at channel beg/end, 2-72 next line, 3-4, 3-61 search distance, 2-70 smart corners, 2-72 spacing, 2-71

show lines report, 1-39 spacing

Channel Design Max, 2-71 Line Editor, 2-40

turning basins, 2-39, 2-66 survey preparation, 3-1 survey units. See geodetic parameters:distance units swap depths

Single Beam Max, 4-33, 4-34 SWP files. See Also survey files-raw, data files

definition, 1-29, 9-3, 9-4 Export program, 6-104

symbols. See Also chart features, boat shapes boat, 2-131, 3-27 Chart program, 7-61 chart symbols, 7-67 DGW Editor, 7-68 Metadata program, 7-76 Shore Manual program, 7-67

synchronize clock, 2-103, 2-106 T0 pulse, 2-140 Target Editor


target files. See Also targets appending

Target Editor, 2-148 creating

Hyscan, 5-26 Side Scan Survey, 5-17, 5-18 Survey, 3-32, 3-63 Target Editor, 2-146

displaying Hyscan, 5-26 Side Scan Survey, 5-18 Survey, 3-13, 3-33, 3-34, 3-36, 3-37

editing Side Scan Survey, 5-18 Survey, 3-37 Target Editor, 2-147

loading Side Scan Survey, 5-17 Survey, 3-37 Target Editor, 2-147

naming Hyscan, 5-26 Side Scan Survey, 5-17 Survey, 3-32, 3-33, 3-34, 3-63 Target Editor, 2-147

overriding default path, 3-33 overview, 1-40 quality data, 3-35 saving

xxx HYPACK® MAX Manual 1/05

Hyscan, 5-26 Survey, 3-33 Target Editor, 2-147, 2-148

unloading Survey, 3-37

warnings target overwriting, 5-26

targets. See Also target files creating. See targets:marking deleting, 2-148, 3-37 displaying, 3-34

3D Terrain Viewer, 7-158 Hyscan, 5-26 Side Scan Survey, 5-18 Survey, 3-33, 3-34, 3-36, 3-37

exporting Export, 6-111 Hyplot Max, 6-23

labeling Export, 6-111 Hyscan, 5-26 Target Editor, 2-147

marking Side Scan Survey, 5-18 Survey, 3-38, 3-63 Target Editor, 2-146, 2-147

positions Side Scan Survey, 5-17, 5-18 Survey, 3-34, 3-36, 3-37, 3-38, 3-39 Target Editor, 2-147 target properties, 5-18

quick mark Side Scan Survey, 5-18 Survey, 3-33

saving Hyscan, 5-26 Target Editor, 2-147

selecting Side Scan Survey, 5-17 Survey, 3-34, 3-37

settings circles, 3-36, 6-111 display defaults, 3-36 distance and bearing, 3-34 events at targets, 3-36 labels, 3-36, 6-111 target properties, 3-34, 5-18

water's edge, 3-38 TDX files

definition, 9-3 Manual Tides program, 7-7, 7-9

telemetry tide gauges, 2-124, 3-46 template files

3D Shape Editor, 7-24 TGT files. See Also target files, targets

3D Terrain Viewer, 7-158 definition, 9-3 Export, 6-104 Hyscan, 5-26 Side Scan Survey, 5-17 Survey, 3-32 Target Editor, 2-146

TID files. See Also tide files, tide corrections definition, 9-3 Harmonic Tides program, 3-47, 7-2, 7-3 Manual Tides program, 3-47, 7-6, 7-7, 7-9 Multibeam Max, 2-124 Single Beam Max, 2-124, 4-8, 4-13 Single Beam Max, 4-12 Survey, 2-124

tide corrections applying

Multibeam Max, 1-44 Single Beam Max, 1-44, 4-8, 4-10, 4-11, 4-15 Survey, 3-46, 3-47, 3-45–3-47

displaying Dredgepack, 8-7 Single Beam Max, 4-24, 4-28


exporting Export, 6-115

Harmonic Tides program example, 7-3 overview, 1-45, 7-2 procedure, 7-2

inverting Manual Tides, 7-9 Single Beam Max, 7-17

manual entry, 3-46, 7-2 Manual Tides program

example, 7-5, 7-7 high-low water times and heights, 7-5 importing NOAA historical tide data, 7-8 linear method, 7-7 manual observations, 7-6 overview, 1-45 procedure, 7-6 spline method, 7-7

merging with heave, 4-19 NOAA tide book, 7-5 overview, 7-1 predicted. See tide corrections:Harmonic Tides, tide

corrections:Manual Tides, device drivers:tidefile.dll RTK (Real Time Kinematic) tide corrections

alarm, 2-108, 3-23, 8-9 filtering, 2-107 GPS status codes, 2-108 overview, 3-47, 7-9 settings, 2-107, 4-15, 4-18, 4-19, 7-9–7-17 with KTD file, 7-10 without KTD file, 7-10

RTK tide corrections warning, 2-107, 2-109

Survey, 3-45–3-47 telemetry tide gauges, 2-124, 3-46, 7-2 tide adjustments, 1-45

Single Beam Max, 4-12 tidefile device driver, 3-47 warning

calculating in non-kinematic mode, 2-107 tide files

editing Manual Tides, 7-9

HYPACK® MAX Manual 3/03 • xxxi

graphing Harmonic Tides program, 7-3, 7-4 Hypack Max, 7-1 Manual Tides program, 7-6, 7-7

overview, 1-40, 7-1 saving

Harmonic Tides program, 7-3, 7-4 Manual Tides program, 7-5, 7-7, 7-9

selecting Single Beam Max, 4-8, 4-10, 4-11, 4-13 Survey, 3-47

tide stations, 7-9, 7-14 tidefile.dll. See device drivers:tidefile.dll TIF files, 1-37

3D Terrain Viewer, 7-168 exporting

Hyscan, 5-31 TIN Model program, 6-88

Hyscan, 5-20, 5-30 Side Scan Survey, 5-9 TIN Model program, 6-88

time displaying

Memory Viewer, 3-49 Side Scan Survey, 5-8, 5-19 Single Beam Max, 4-28 Survey, 3-17

exporting Export, 6-115

time tags applying

1PPS pulse, 2-100 comparison of methods, 2-100 fixed latency, 2-100, 2-103 synch. clock with ZDA, 2-82, 2-103, 2-106 ZDA and synch. clock, 2-100

calculating depth position, 9-37 correcting, 7-72

Data Adjustments program, 2-145 TIN files

definition, 9-3 TIN Model program, 6-67, 6-68

TIN Model program clipping survey files, 6-82 examples

cutting sections, 6-79 TIN to Channel volumes calculation, 6-99 TIN to level volumes calculation, 6-101 TIN to TIN volumes calculation, 6-102

exporting all format files, 6-78, 6-89 contours, 6-85 DXF files, 6-85 grid differences, 6-92, 6-93 matrix files, 6-89 TIF files, 6-88 TIN differences, 6-92, 6-93

measuring distance and position, 6-78 overview, 1-46, 6-67 procedures

calculating volumes, 6-94, 6-96 cutting sections, 6-78

exporting all format files, 6-89 exporting DXF files, 6-85 exporting matrix files, 6-89 exporting TIF files, 6-88

reports displaying, 6-93 printing, 6-93

settings color, 6-73 initial data, 6-68 legend, 6-72 Philadelphia method, 6-95 saving, 6-68 shades, 6-73 smooth contours, 6-86 view options, 6-71 views, 6-74–6-78 volumes calculation control, 6-95

smoothing contours, 6-91 volumes calculations

advantages, 6-98 changing calculation mode, 6-95 disadvantages, 6-99 procedure, 6-94, 6-96 TIN to channel, 6-68 TIN to level, 6-68 TIN to TIN, 6-68

TIN models 2D sections, 6-76 2D TIN, 6-74 3D sections, 6-76 3D TIN, 6-74 clipping, 6-82 contour TIN, 6-75 cutting sections, 6-78 displaying

3D Terrain Viewer, 7-137 TIN Model program, 6-67, 6-71

polysection TIN, 6-77 printing, 6-93 saving, 6-67 solid TIN, 6-75, 6-76 view options, 6-71

Title Block Editor overview, 6-13 procedure, 6-13 settings, 6-13–6-15

title blocks creating

Hyplot Max, 6-11 Title Block Editor, 6-13

displaying Hyplot Max, 6-11

TMP files. See Also channel templates, Cross Sections and Volumes:Template Editor

Cross Sections and Volumes, 6-28, 6-40 definition, 9-3

toe lines Channel Condition Reporter, 7-129 Channel Design Max, 2-62, 2-63 importing

Channel Design Max, 2-64

xxxii HYPACK® MAX Manual 1/05

toe points Channel Design Max, 2-62, 2-63, 2-67 Cross Sections and Volumes, 6-34 importing

Channel Design Max, 2-64 top of bank

Channel Design, 2-65 Channel Design Max, 2-68

towfish. See Also boat shapes altitudes

Hyscan, 5-24, 5-26, 5-27, 5-28 Side Scan Survey, 5-8

altitudess Side Scan Survey, 5-8

color settings, 2-132 data display, 2-132 settings

Hardware, 2-127–2-131 LBL systems, 2-136 main vessel, 2-133, 3-29, 3-30 Survey, 2-131, 2-126–2-134

shapes, 2-131 symbols, 2-131 warning-offsets, 2-129, 2-135, 2-136

towfish altitudes calculating

Hyscan, 5-9 creating

Hyscan, 5-28 default, 5-13, 5-24

Hyscan, 5-29 defining

Hyscan, 5-26 digitizing

Hyscan, 5-28 displaying


measuring Hyscan, 5-24

smoothing Hyscan, 5-27

TPL files. See Also channel templates, Cross Sections and Volumes:Template Editor

Cross Sections and Volumes, 6-28, 6-40 Survey, 3-20, 8-4

tracklines displaying

Pathfinder program, 7-82 Single Beam Max, 1-44, 4-22 Survey, 3-19–3-21


exporting Export program, 6-112 Hyplot Max, 6-23 Pathfinder program, 7-82

labeling Export program, 6-112 Hypack Max, 1-15

plotting Survey, 3-65

previewing Pathfinder, 7-82

Survey, 3-27 Trackpoint systems, 2-134, 2-135 Transducer Offsets program


latency, 2-93 offsets-multiple transducer, 2-93

transverse mercator projections. See projections:transverse mercator

traverse calculation dialog, 2-35, See Traverse program Traverse program

overview, 1-47, 2-25, 2-35 printing screen, 2-35 procedure, 2-35

truncation Hypack Max, 1-14 Hyplot Max, 6-9

turning basins Channel Condition Reporter, 7-129 Channel Design Max, 2-63, 2-66

basin level, 2-68 multiple basins, 2-68 side slopes, 2-68 simple basin, 2-66

creating Channel Design Max, 2-66

curved basin lines, 2-69 definition, 2-62, 2-66 settings

Channel Condition Reporter, 7-130 U.S. Army Corps. of Engineers Coordinate Conversion

program. See geodetic parameters:Use Corpscon Unit Conversion program

overview, 1-47 printing screen, 2-36

units conversion Metric File Converter, 7-79

update frequency, 2-79, 2-81 User-Defined Output. See Export program:settings:user-

defined output UTC time, 2-100

NMEA GGA string, 2-81, 2-100, 2-103, 2-106 synch. clock with ZDA, 2-81, 2-103, 2-106 ZDA and synch. clock, 2-100

vectors ADCP to DXF, 7-110 Survey, 3-27

VEL files. See Also Sound Velocity program, sound velocity corrections

definition, 9-3 Single Beam Max, 4-13 Sound Velocity program, 1-39

vertical scale 3D Shape Editor, 7-37 3D Terrain Viewer, 7-55, 7-141, 7-148

VES files 3D Shape Editor, 7-45 3D Terrain Viewer, 7-154 definition, 9-3

HYPACK® MAX Manual 3/03 • xxxiii

exporting 3D Shape Editor, 7-45

importing 3D Terrain Viewer, 7-154

vessels. See boat shapes, towfish video splitters, 2-115, 2-116 virtual screens, 2-115–2-116, 3-24 VOL files

Cross Sections and Volumes, 6-39 definition, 9-3

volumes calculations Cross Sections and Volumes, 6-38

end area 1 method, 6-44 end area 2 method, 6-45 end area 3 method, 6-46 End Area methods, 6-40 method comparison, 6-40 Philadelphia Methods, 6-49 reach volumes, 6-63 Savannah method, 6-47 standard Hypack method, 6-43 warning, 6-42

Dredgepack estimates, 8-21 TIN Model program, 6-94, 6-96

advantages, 6-98 changing calculation mode, 6-95 disadvantages, 6-99 Philadelphia method, 6-67, 6-95 TIN to channel, 6-68 TIN to level, 6-68 TIN to TIN, 6-68

volumes reports Cross Sections and Volumes program, 6-38

cross sections graphs, 6-37 printing

Cross Sections and Volumes, 6-39 TIN Model program, 6-93

saving Cross Sections and Volumes, 6-39 TIN Model program, 6-94

TIN Model program, 6-93 VPF (Vector Product Format) charts

loading Hypack Max, 2-5

Survey, 3-32 warnings. See Also alarms

Advanced Channel Design nonconvex shape error, 7-50 non-flat face error, 7-50 orientation error, 7-50

ARCS charts permit and license coordination, 2-2

average end area and nonparallel survey lines, 6-42 calculating in non-kinematic mode, 2-107 Dredgepack

save only strikes in elevation mode, 8-14 Export to Line, 2-78 Hardware

echosounder calibration, 2-114, 9-40 ellipsoid height vs mean sea level, 2-99 GPS position accuracy, 2-99 mobile offsets, 2-129, 2-135, 2-136

RTK alarms and DGPS systems, 2-109 update frequency affects sync. clock accuracy, 2-82, 2-

106 Hypack Max

ARCS charts, 2-2 overwriting data, 1-25 overwriting files, 1-23

Hyscan target overwriting, 5-26

Matrix Editor editing filled matrix files, 2-156

Seabed Statistics data inclusion, 7-117

Survey logging over a network, 1-23

water column removing. See Also tide corrections

Hyscan, 5-27, 5-29 water's edge, 3-38 Window Viewer

overview, 3-24 procedure, 3-25 settings, 3-25

XTF files Hyscan, 5-19 Side Scan Survey, 5-16

XYZ Collector overview, 1-42, 7-69 procedure, 7-69

XYZ files Merge XYZ, 7-83

XYZ format, 1-29 3D Terrain Viewer, 7-138 Advanced Channel Design, 7-46 Channel Condition Reporter, 7-133, 7-135 definition, 9-4 Dredgepack, 8-13 Export program, 6-105, 6-113 Hyscan, 5-29 Mapper, 4-37, 4-38 Remap, 7-79 Sort program, 4-38–4-40 TIN Model, 6-67, 6-94 TIN Model program, 6-67 XYZ Collector, 7-69 XYZ to MTX program, 1-48, 2-154, 8-10

XYZ to MTX program, 1-48 overview, 2-154 procedure, 8-10

yaw (camera) camera controls

3DTV, 7-165 yaw (devices)

correcting data Data Adjustments program, 7-72 Multibeam Max, 2-146

definition, 2-92 displaying

Multibeam Max, 2-146 Single Beam Max, 4-15

editing Multibeam Max, 2-146

xxxiv HYPACK® MAX Manual 1/05

Single Beam Max, 4-15 offsets

Hardware, 2-79 yaw (vessel). See heading ZDA message, 2-82, 2-100, 2-103, 2-106 zip files. See Compress Project

zones C-Maps, 2-6 geodetic parameters, 2-19

Z-scale. See vertical scale, See vertical scale Z-values. See depths

user's manual hypack max - spatialtech.com.t0).pdf · registration page the following...

Documents