frequency synthesizer description resolution*/settling time the mw 15131mp is a direct analog, full...
TRANSCRIPT
2.0-18.0 GHz
Microwave Division
FEATURES
Low Spurious <-70dBc
Harmonics -50dBc max.
Noise Floor -140dBc
Phase-noise -105dBc/Hz@1KHz
Ultra Wideband Frequency Coverage
Settling Time < 1 micro second
Resolution 1Hz
Phase and Frequency Coherent
FM Modulations Built-in
Compact Size: (DxWxH): 19"x19"x3U
HIGH SPEED DIRECT ANALOG
FREQUENCY SYNTHESIZER
Model: MW-15131MP-2-18-00
NEW PRODUCT
#GS24F0072MElisra GSA Contract
GENERAL DESCRIPTION
RESOLUTION*/SETTLING TIME
The MW 15131MP is a direct analog, full band synthesizer, designed for OEM'srequiring, phase and frequency coherent. With less than 1 microsec settling timefrom any frequency to any frequency, this synthesizer covers the full frequencyrange of 2.0 to 18.0 GHz (Option: 0.5-18GHz).
The product is based on a 13.0 to 14.6 GHz synthesizer with a 1Hz frequencystep and 1microsec settling time that is converted to cover the entire 2-18GHz frequencyband. The fine frequency step block includes three decade modules that control thedecade of the output frequency step (1Hz, 10KHz, 100KHz, 1MHz, 10MHz steps).The basic 100 MHz resolution can be selected within 50 nsec. Each decademodule reduces the speed by 250 nsec, so the accumulated settling time is asfollows:
100MHz10MHz1MHz100KHzBelow 100KHz
50nsec.300nsec500nsec800nsec
1 sec�
HIGH SPEED DIRECT ANALOG
FREQUENCY SYNTHESIZERModel: MW-15131MP-2-18-00
Microwave Division
18.0000000
FREQUENCY SYNTHESIZERModel: MW-15131MP-2-18-00
The Synthesizer unit includes a low noise 100MHz Internal OCXO with an accuracyand temp. stability of 0.1ppm. In addition, an external reference can be used forphase noise improvement, system coherence and user special requirements.The unique internal design of this synthesizer ensures 70dBc minimum spuriousrejection.
The MW 15131MP Mainframe Rack offers convenient housing for oneor two RF synthesizer modules within the same 19" enclosure.
ELECTRICAL SPECIFICATIONS
Frequency Range:
Frequency Step
Settling Time:
Output Power:
Output Power Variation:
Reference
Spurious:
2.0 to 18.0 GHz
1 Hz
1 microsec max
+10dBm min
3dB typ.
Internal Reference- Frequency: 100 MHz- Accuracy and Temp. Stability: 0.1 ppm(optional 0.01 ppm)
-70 dBc max. up to 100MHz from carrier
External Reference (Requirements)- Frequency: 100 MHz- Input level: 7 dBm- Impedance: 50Ohm
Harmonics:- 50dBc max.
Phase Noise- 60dBc/Hz max. @ 10Hz- 90dBc/Hz max. @ 100Hz- 105dBc/Hz max. @ 1KHz- 120dBc/Hz max. @ 10KHz- 125dBc/Hz max. @ 100KHz- 130dBc/Hz max. @ 1MHz- 135dBc/Hz max. @ 10MHz
Noise Floor- 140dBc
FM Modes:"0" - CW"1" - DC to 6 MHz"2" - 3KHz to 6 MHz
Wideband FM:- Modulation Frequency: DC to 6 MHz- Deviation: 250MHz max.- Modulation Rate: 500 MHz / 1usec- Frequency Accuracy: 10 MHz- FM Chirp
Phase: Coherence- For steps of 1 MHz and above- For steps below 1 MHz contact factory
Narrowband FM- Modulation Frequency: 3 KHz to 6 MHz- Deviation: 50MHz max.Modulation rate: 100MHz / 1microsec- Frequency Accuracy: Same as the reference
Frequency Monitoring Output:P out - 20dBc typical (relative to main output)
Frequency Control:BCD (41 bit+stb)
AC Power:110 or 220 VAC 47-63Hz/
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature:0 C to + 50 Co o
Storage Temperature:20 C to + 85 Co o
MECHANICAL SPECIFICATIONS
Connectors::- RF: N Type Female & SMA-F- DC: D-Type, 9 Pin- Frequency Control: D-Type, 50 Pin- Digital FM and PM Control: D-Type, 25 Pin
Size (DxWxH):19"x19"x3UWeight: 20 Kg. max.
Options:- High stability OCXC is available as part of the
mainframe rack 0.01 ppm- Phase Modulation: 5Bit TTL- Phase Modulation: Bi-Phase- Front Panel Control- Frequency Range 0.5-18 GHz- Rack mounting brackets (slides)- Dual Mainframe Microwave Division
HIGH SPEED DIRECT ANALOG
FREQUENCY SYNTHESIZERModel: MW-15131MP-2-18-00
Frequency is Coherent
Model: MW 15131MRSINGLE/DUAL MAINFRAME RACK
The MW 15131MR is a 19" Single/Dual mainframe rack used for the housingand operation of one or two Elisra MW 15131P RF synthesizer modules.The rack is suitable for 110/220 VAC operation and includes: switching powersupplies, reference oscillator and interfacing hardware.
The power supplies deliver +6.5V, -15V, and +15 to the synthesizer modules.Each rack contains one/two independent sets of RF and Control connectorsinterfacing one or two synthesizers Modules.
Each set, used to interface one RF module, includes a frequency controlconnector (D-type, 50 pin), an SMA connector for analog FM modulation inputand an N-Type connector for main RF output.
The mainframe rack includes a low noise 100MHz Internal OCXO with accuracyand temp. stability of 0.1 ppm.An optional, low noise high stability 0.01 ppm OCXO is available.
Note: Dual Mainframe is an option
±
±
Microwave Division48 Mivtza Kadesh St., Bene Beraq 51203 IsraelTel. 972-3-6175655 Fax. 972-3-6175299Website: www.mw-elisra.come-mail: [email protected]
The Elisra logo is a trademark of Elisra Electronic Systems Ltd. other companiesand brands, products and service names are trademarks or registered trademarks oftheir perspective holders. This document is preliminary and specifications may besubject to change without further notice.
HIGH SPEED DIRECT ANALOG
FREQUENCY SYNTHESIZER
Model: MW-15131MP-2-18-00
Catalog Reference No. 45030512-10.04