frequency synthesizer - mw-elisra.com · general description resolution*/settling time the mw...

4
2.0-18.0 GHz Microwave Division FEATURES Low Spurious -60dBc Harmonics -50dBc max. Noise Floor -130dBc Phase-noise - 102dBc/Hz@1KHz Ultra Wideband Frequency Coverage Settling Time <1 micro second Resolution 10KHz Phase and Frequency Coherent Modulations: Built-in Compact Size: (DxWxH): 19"x19"x3U FM HIGH SPEED DIRECT ANALOG #GS24F0072M Elisra GSA Contract FREQUENCY SYNTHESIZER Model: MW-15130 -2-18-0.01-00 MP

Upload: dangcong

Post on 29-Jul-2018

222 views

Category:

Documents


0 download

TRANSCRIPT

2.0-18.0 GHz

Microwave Division

FEATURES

Low Spurious -60dBc

Harmonics -50dBc max.

Noise Floor -130dBc

Phase-noise - 102dBc/Hz@1KHz

Ultra Wideband Frequency Coverage

Settling Time <1 micro second

Resolution 10KHz

Phase and Frequency Coherent

Modulations: Built-in

Compact Size: (DxWxH): 19"x19"x3U

FM

HIGH SPEED DIRECT ANALOG

#GS24F0072MElisra GSA Contract

FREQUENCY SYNTHESIZER

Model: MW-15130 -2-18-0.01-00MP

GENERAL DESCRIPTION

RESOLUTION*/SETTLING TIME

The MW 15130MP is a direct analog, full band Frequency Synthesizer unit, designedfor OEM's requiring phase and frequency coherent synthesis. With 1 microsecsettling time from any frequency to any frequency, this synthesizer covers the fullfrequency range 2.0 to 18.0 GHz.

The product is based on a 13.0 to 14.6 GHz synthesizer with a 10 KHz frequencystep and 1microsec setting time that is converted to cover the entire 2-18GHzfrequency band. The fine frequency step block includes four decade modules thatcontrol the decade of the output frequency step (10KHz, 100KHz, 1MHz, 10MHzsteps). The basic 100 MHz resolution can be selected within 50 nsec. Each decademodule reduces the speed by 250 nsec, so the accumulated settling time is asfollows:

100MHz10MHz1MHz100KHz10KHz

The Synthesizer unit includes a low noise 100MHz Internal OCXO with an accuracyand temp. stability of 0.1ppm. In addition, an external reference can be used forphase noise improvement, system coherence and user special requirements.The unique internal design of this synthesizer ensures 60dBc minimum spuriousrejection.

The MW 15130MR Mainframe Rack offers convenient housing for oneor two RF synthesizer modules within the same 19" enclosure.

50nsec.300nsec550nsec800nsec

<1 sec�

Microwave Division

18.0000000

FREQUENCY SYNTHESIZERModel: MW-15130MP-2-18-0.01-00

HIGH SPEED DIRECT ANALOG

FREQUENCY SYNTHESIZERModel: MW-15130MP-2-18-0.01-00

ELECTRICAL SPECIFICATIONS

Frequency Range:

Frequency Step

Seettling Time:

Output Power:

Output Power Variation:

Reference

Spurious:

2.0 to 18.0 GHz

10 KHz

1 microsec max

+10dBm min

3dB typ.

Internal Reference (Requirements)- Frequency: 100 MHz- Accuracy and Temp. Stability: 0.1 ppm(optional 0.01 ppm)

-60dBc max.

External Reference- Frequency: 100MHz- Input level: 7dBm- Impedance: 50 Ohm

HIGH SPEED DIRECT ANALOG

FREQUENCY SYNTHESIZERModel: MW-15130MP-2-18-0.01-00

Harmonics:- 50dBc max.

Phase Noise- 55dBc/Hz max. @ 10Hz- 85dBc/Hz max. @ 100Hz- 102dBc/Hz max. @ 1KHz- 113dBc/Hz max. @ 10KHz- 115dBc/Hz max. @ 100Hz- 120dBc/Hz max. @ 1MHz- 130dBc/Hz max. @ 10MHz

Noise Floor- 130dBc

FM Modes:"0" - CW"1" - DC to 6MHz"2" - 3KHz to 6MHz

Wideband FM:- Modulation Frequency: DC to 6MHz- Deviation: 250MHz max.- Modulation Rate: 500 MHz / 1usec- Frequency Accuracy: 10MHz- FM Chirp

Phase: Coherence

Frequency is Coherent

- For steps of 1MHz and above- For steps below 1MHz contact factory

Narrowband FM- Modulation Frequency: 3KHz to 6MHz- Deviation: 50MHz max.- Modulation rate: 100MHz / 1 microsec- Frequency Accuracy: same as the reference

Frequency Monitoring Output:P out - 20dBc typical (relative to main output)

Frequency Control:BCD (25 bit+stb)

AC Power:110 or 220VAC/47-63Hz

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature:0 C to + 50 Co o

Storage Temperature:20 C to + 85 Co o

MECHANICAL SPECIFICATIONS

Connectors::- RF: N type F (SMA-F optional)- DC: D-Type, 9 Pin- Frequency Control: D-Type, 50 Pin- Digital FM and PM Control: D-Type, 25 Pin

Size (DxWxH): 19"x19"x3UWeight: 20 Kg. max.

Options:- High stability OCXO is available as part of the

mainframe rack 0.01ppm- Phase Modulation: 5Bit TTL- Frequency Range 0.5-18GHz or 2-26GHz

Microwave Division

Model: MW 15130MRSINGLE/DUAL MAINFRAME RACK

Microwave Division48 Mivtza Kadesh St., Bene Beraq 51203 IsraelTel. 972-3-6175655 Fax. 972-3-6175299Website: www.mw-elisra.come-mail: [email protected]

The Elisra logo is a trademark of Elisra Electronic Systems Ltd. other companiesand brands, products and service names are trademarks or registered trademarks oftheir perspective holders. This document is preliminary and specifications may besubject to change without further notice.

HIGH SPEED DIRECT ANALOG

FREQUENCY SYNTHESIZER

Model: MW-15130MP-2-18-0.01-00

Catalog Reference No. 45040915 - 10.04

The MW 15130MR is a 19" Single/Dual mainframe rack used for the housingand operation of one or two Elisra MW 15130P RF synthesizer modules.The rack is suitable for 110/220 VAC operation and includes: switching powersupplies, reference oscillator and interfacing hardware.

The power supplies deliver +6.5V, -15V, and +15 to the synthesizer modules.Each rack contains one/two independent sets of RF and Control connectorsinterfacing one or two synthesizers Modules.

Each set, used to interface one RF module, includes a frequency controlconnector (D-type, 50 pin), an SMA connector for analog FM modulation inputand an N-Type connector for main RF output.

The mainframe rack includes a low noise 100MHz Internal OCXO with accuracyand temp. stability of 0.1 ppm.An optional, low noise high stability 0.01 ppm OCXO is available.

Note: Dual Mainframe is an option

±

±