DCNS PROJECT Laser Scanner FARO LS 420 & Model with

InovX PlantX software

Summary :

1. Point Cloud capture : 8 positions

2. Cleaning and assembling point cloud

3. Direct measurements on the point cloud & Colorised scans

4. Model with InovX PlantX software

5. Datas exported to AutoCAD

6. Scan ARM use.

Par Christophe Bénard – Responsable Laser Scanner France

1. Point Cloud capture : 8 positions

2. Cleaning and assembling point cloud

3. Direct measurements on the point cloud & Colorised scans

4. Model with InovX PlantX software

5. Datas exported to AutoCAD

6. Scan ARM use on the no accessible zones with laser scanner LS & points cloud in Geomagic software

Vue de dessus

Comments:

• In the project, it is important to catch a maximum of points cloud to get a maximum of information in the area before to model.

• The ScanARM use is not a big advantage in this case because the area is very small. To grow the scan positions seems to be more profitable (use the LS without tripod).

• InovX PlantX software is used to model and AutoCAD software to work on the model to calculate and create the maintenance on the Marine Boats.

• Demonstration FARO à Brest

• Equipment used: Laser Scanner FARO LS420 + Digital Camera + FARO Scene software+ FARO Scan ARM

• Software used: InovX PlantX

• Contact Faro: Christophe Bénard

• 06.70.21.49.60 christophe.benard@faroeurope.com