nidec asi silcovert h series
DESCRIPTION
Nidec ASI_SILCOVERT H seriesTRANSCRIPT
www.nidec-asi.com
SILCOVERT H SeriesSILCOVERT H Series
PPT2013.01.01.14EN
2www.nidec-asi.com
Silcovert H Series
Silcovert H Series are a Multi Level Converters with LV IGBT power devices and a more
efficient and precise control for induction and synchronous motors.
PPT2013.01.01.14EN
3www.nidec-asi.com
Our H-series drives are compatible with your existing motor
systems, regardless of brand or age. Part of our analysis will
address the alternative of installing a completely new
variable speed drive system versus that of adding a variable
frequency converter to an existing fixed speed motor or re-
usable equipment refurbishing. Our goal is to bring new life
to your plant through the analysis of existing motors.
Silcovert H Series
PPT2013.01.01.14EN
4www.nidec-asi.com
The variable frequency converter consists of several standard assemblies:converter, inverter, d.c. link, cooling system, controller
~
=
=
~
converter inverter
cooling system
from input transformer to a.c. motor
controller
d.c. l ink
Silcovert H SeriesVCF Main Assemblies
PPT2013.01.01.14EN
5www.nidec-asi.com
Converter: change of a.c. power with fixed frequency into d.c. power
~
=
=
~
converter inverter
cooling system
from input transformer to a.c. motor
controller
d.c. l ink
Inverter: change of d.c. power into a.c. power with variable voltage and frequency
D.C. link: energy storage
Cooling system: removal of the heat
Controller: control of the motor, monitor and protection of the system
Silcovert H SeriesVCF Main Assemblies
PPT2013.01.01.14EN
6www.nidec-asi.com
Proven design
• VSI solutions
• multi-phase diode configurations
State-of-the-art technology
IGBT (fully-controlled, fast switching, low losses, proven)
Reliability of operation
• device selection
• sizing (application, load cycle)
• full load current test
Silcovert H SeriesConverter & Inverter
PPT2013.01.01.14EN
7www.nidec-asi.com
Modularity
• Power Cell
• compactness and robustness
• fast changefoto
Switching
• insulation HV/LV by optical fibres
• monitoring
Safety
• HV and LV circuits separation
• key interlock
• IP20 with open doors
Silcovert H SeriesConverter & Inverter
PPT2013.01.01.14EN
8www.nidec-asi.com
d.c. link
Integrated in the phase assembly togetherwith the capacitors (VSI)
Insulation monitor
Silcovert H Seriesd.c. Link
PPT2013.01.01.14EN
9www.nidec-asi.com
Air cooling system
• forced, in open loop (T environment ≤ 45°C, size)
• draft fan on top
• low pressure inside the cabinet
• suction from the front
• fan redundancy
Silcovert H SeriesAir Cooling
PPT2013.01.01.14EN
10www.nidec-asi.com
Water cooling system
• deionized, in closed loop (T raw water ≤35°C)
• water pump, redundancy
• filter cartridges
• monitoring (pressure, temperature, flow,conductivity)
• piping (PVC, stainless steel)
• water cooling unit integrated in the cabinet
• fast connections to easily remove the power assemblies
Silcovert H SeriesWater Cooling
PPT2013.01.01.14EN
11www.nidec-asi.com
Water-to-water heat exchanger
• integrated in the cooling unit (VFC cabinet)
Water-to-air heat exchanger (fin fans)
• raw water not available, T external air < 50°C
• external to the cabinet
• deionized water loop only
Water chiller unit
• raw water not available, T external air up to 52°C
(higher T on request)
• special machines
waterchiller
Silcovert H SeriesWater Cooling
PPT2013.01.01.14EN
12www.nidec-asi.com
Drive controller
• full digital
• motor control (V/Hz, sensorless, FOC algorithms)
• monitoring and protecting functions (transformer, VFC, motor)
• auxiliary circuits management
• hardwired and serial interface
• remote monitoring and diagnostic capability
HMI
• graphic display
• indication in full language (user friendly)
• local control of the system
Silcovert H SeriesController
PPT2013.01.01.14EN
13www.nidec-asi.com
Silcovert NH
Silcovert NH - The PWM (for USA Market and special Applications) technique with high switchingfrequency allows an almost sinusoidal motor current with low total losses and ripple-free torque. Itswater cooling method permits to achieve high output power ranges.
Power range:water cooling2900/14400 KVA
Air Cooling1500/3700 KVA
Voltage:up to 4160/6000/6600
Output Frequency:5-140 Hz
PPT2013.01.01.14EN
14www.nidec-asi.com
Silcovert TH
Silcovert TH – It’s configuration with several power cells connected in series per phase and thePWM technique with high switching frequency allows an almost sinusoidal motor current with lowtotal losses and ripple-free torque. Its air cooling method permits to achieve an output powerrange up to 3000 KVA.
Power range:air cooling up to 8100 KVA
water cooling up to 18700 KVA
Voltage:up to 4160/6000/6600/7200 V
Output Frequency:250 Hz (std)330 Hz max with derating
PPT2013.01.01.14EN
15www.nidec-asi.com
multipulse diode front end configuration
iU1 iU2 iU3
iV1 iV2 iV3
iW1 iW2 iW3
oU
oV
oW
iU1
iU2
iU3
iV1
iV2
iV3
iW1
iW2
iW3
Silcovert H SeriesVSI Diagram
PPT2013.01.01.14EN
16www.nidec-asi.com
Silcovert H SeriesApplications
Silcovert H Series can be used for various applications such as pumps ship propulsion, high torque/ overload / dynamic requirements (metals), large centrifugal loads (pumps, compressors, fans) …
With a customized retrofit you can achieve increased levels of safety, reliability andefficiency in your plant. We can assist you in the analysis to improve capacity
and reduceenergy consumption.
Our retrofitting solutions provide you with an optimum return-on-investment, long-timecost reduction thanks to a more efficient and precise control of motors, pumps etc…,
reduced down-time and less maintenance.
PPT2013.01.01.14EN