ITM InternationalInspection Ltd.

Local surveillance. Global commitment.

About Us – What We Do

Based in the UK, ITM operate anetwork of specialist personnelthroughout Europe.

With an in-depth knowledge of the Oil& Gas Industry, our local staff can workin partnership with you to ensure yoursurveillance requirements are metthrough our experienced Inspectorson the ground. We aim to be flexibleand provide a tailor-made solution foryour requirements.

We offer on site:

Mechanical InspectionForgings, Castings and Fabrications.

Electrical InspectionElectronic Instrumentation, ElectricMotors, Generators.

ExpeditingFind and solve potential problemsaffecting delivery.

Vendor Assessment AuditingEnsure vendors provide the qualityyou need.

Our Customers:– Oil Companies– Engineering Contractors– Oilfield Equipment Manufacturers

QUALITY SURVEILLANCE,INSPECTION, TEST WITNESSING& EXPEDITING SERVICES

Our Goals:Add Value, Safety & Compliancethrough our extensive knowledgeand experience in the Oil & Gasand Energy Industries.

Local surveillance. Global commitment.

ITM InternationalInspection Ltd.Our Commitment

QualityOur quality management system is fully inaccordance with ISO 9001 requirements.

Staff Technical CompetenceAll our staff have relevant industryexperience and are selected basedon their specialised qualifications.This allows us to use the most suitableInspector/Expeditor for your needs.To maintain their level of service,our personnel are given continuoustechnical training.

Personal Health & SafetyWhen visiting a manufacturer/supplier'splant, our staff will strictly observe allHealth and Safety Executive (HSE)regulations and will all wear theappropriate personal protective

equipment (PPE) at all times. ITMInternational Inspection personnelare not expected to, and will not,compromise personal safety or thatof others in their charge.

EthicsAll our Inspectors are instructed tofully comply with ITM's policy of strictobservance of all laws, and maintaina high standard of ethics and integrity.We also assure all information gainedor accessed will be treated with thestrictest confidence.

ITM InternationalInspection Ltd.Mechanical Inspection

Local surveillance. Global commitment.

ITM – Your Second Party MechanicalInspection SpecialistOur Quality Surveillance Inspectors canvisit the client’s sub-contractor facility towitness and verify inspections and tests,review conduct of special processes,verify measurements and test resultsand assess workmanship.ITM Inspectors are available for aone-day visit or residential assignments.Detailed reports are forwarded within48 hours to the client.With Inspectors based and operatingthroughout Europe we can respondquickly and cost-effectively to representyou on site.

Our area of expertise:We carry out inspections of heavyforgings, castings and criticalcomponents:

• Christmas Trees, Wellheads, Subseaand Riser Components

• Pipes, Valves, Fittings & Flanges

• Steel Structures, welded or cast

We are experienced with various materialtypes. These include: carbon steel, lowalloy steel, austenitic, martensitic andduplex stainless steel. We are also familiarwith relevant manufacturing processes,American and International codes andstandards, NDT international standards.

Our scope of services:The role of ITM is to monitor and inspectproducts on behalf of our clients as theirpartner. We ensure that all aspects of themanufacturing process fully meet theclient’s requirements, in compliance withthe Technical Requisition and withapplicable Quality Plans and/orInspection & Test Plans.

ITM InternationalInspection Ltd.Electrical Inspection

Local surveillance. Global commitment.

ITM – Your Second Party ElectricalInspection SpecialistWe carry out supervision, inspection andtesting of electrical equipment such as:

– Electric motors and generators– Control Panels– Switchgear– Electronic instrumentation– Cables

Our Inspectors are familiar with relevantmanufacturing processes, and with:

• International ElectrotechnicalCommission (IEC) standards

• Institute of Electrical and ElectronicsEngineers (IEEE) standards

• European Norms (EN) and InternationalStandards

Our scope of services:The role of ITM is to monitor and inspectproducts on behalf of our clients as theirpartner. We ensure that all aspects of themanufacturing process fully meet theclient’s requirements, in compliance withthe Technical Requisition and withapplicable Quality Plans and/orInspection & Test Plans.

ITM InternationalInspection Ltd.Expediting

Local surveillance. Global commitment.

ITM – Your Expediting and ProjectFollow-Up SpecialistITM expediting services will work with theclient to establish the level of reportingrequired. In addition to reporting progressof order and identifying potentialbottlenecks and problems, our Expeditorswill use their knowledge and experienceto challenge, where necessary, theinformation given. Our Expeditors arecommitted to helping our client reachthe contractual delivery time whileachieving the requested quality levels.

Four Effective Goals• Verify understanding andimplementation of the purchasespecifications by the supplier

• Create a real time report of progress

• Identify any possible problems andbottlenecks to avoid costly delaysin the deliveries

• Make the exchange of informationbetween client and supplier easierand faster

ITM InternationalInspection Ltd.Vendor Assessment Audits

Local surveillance. Global commitment.

ITM – Your Vendor AssessmentSpecialistThe primary concern with any newcontract is the choice of vendor, as thevendors you use directly influence thequality of your products. Our independentvendor assessment and technical auditservices can be carried out anywhere inEurope, ensuring that your suppliers andvendors provide the quality you need.

Our Vendor assessments comprise a setof questions specific to the sector. Thefocus is on the vendor's organisationand quality management system; thefacilities, including machines andequipment used for production andtesting; procurement; planning; in-processinspections and staff training.

Assess the ability of your vendor orsupplier to deliver your orders andensure regulatory compliance:

• Ensure thorough independentassessments of vendors’ premisesand facilities

• Assess the ability of your vendor orsupplier to deliver your specific orders

• Ensure your suppliers and vendorsmeet all relevant statutory regulationsand quality standards

• Use our detailed assessment report tomake informed procurement decisions

Local surveillance. Global commitment.

We work alongside our customersto ensure satisfaction wheneverequipment quality and safety must betested/inspected in accordance withinternational standards and regulations.

We offer:Thru-Production Quality Surveillance,Inspections, Test Witnessing andExpediting of:

Subsea EquipmentPiping, Fittings, Flanges and ValvesForgings, Castings, Welded ConstructionsMechanical ComponentsElectrical Equipment

ITM International Inspection Ltd.Tron Square, Dunning, PH2 0RG,Scotland, UK.T: +44 (0) 1738 893129

W: www.itm-international.netE: admin@itm-international.net

ITM InternationalInspection Ltd. Our Expertise