flangeadapters - spatiul construit · company 'valmn o jv dep riz10,blga...

COMPANY ''VALMAN'' Vojvode Prijezde 10, BelgradeOffice: Gospodara Vuèiãa 35, Belgrade; Production: USSB Ind. Bus. Zone, Smederevo

Tel./Fax:+381 (0)11-344-6094 E-mail: [email protected] http://www.valman.co.yu

FLANGE ADAPTERS

MATERIAL: GGG 40WORKING PRESSURE: 10/16 bar

NON - RESTRAIN type

For DCI pipes for following diameters of pipes:DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400.

MATERIAL: GGG 40WORKING PRESSURE: 10/16 bar

RESTRAIN type

For DCI pipes with restrain ring for following diameters of pipes:DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400.For PE & PVC pipes with restrain ring for following diameters of pipes:OD 63, OD 90, OD 110, OD 140, OD 160, OD 180, OD 200, OD 225, OD 250, OD 280, OD 315,OD 355, OD 400.

Legend: 1 - body of flange adapter,2 - flange adapter seal

Legend:1- restrain ring2- restrain flange3- gasket4- body of flange adapter

mailto:[email protected]

http://www.valman.co.yu



RECOMMANDED BY COMPANY''VALMAN''

1. For DCI and steel pipes can be used non-restrain flange adapters.

2. For DCI and steel pipes can be used restrain flange adapters (ourrecommendation), whereby obtain absolute safety of this connection.

3. For PE/PVC pipes, we recommended restraint flange adapters with restrainflange.- Why restrain flange? With restrain flange adapters for PE/PVC or DCI pipes usersare safe that pipe can't move from flange adapters, even in extremely conditions ofservices on pipe line.





FLANGE ADAPETER FOR DCI PIPES

WORKING PRESSURE: NP 10/16 barFlanges drilled acc. to DIN 2501 PN 10/16 bar

Corrosion protection: plastic coating- Type: EWS protection(Epoxy-Dusty-Sinter),

- coating thickness 250-500 mm,- large strenght (minimum 8 N/mm²),- good isolation (electrical break throughminimum 1000 Volts),

- protection layer is without any pores- resistance on blows.

Pos. Description Material Protection1 Body of flange adapter GGG 40 Epoxy2 Rubber EPDM or NBR -

Serial No. 2300- 702 703 709 704 705 710 706 707 708DN (mm) 80 100 125 150 200 250 300 350 400OD (mm) 98 118 144 170 222 274 326 378 429D (mm) 200 220 250 285 340 395 445 505 565Dk (mm) 160 180 210 240 295 350 400 460 515d (PN10) 18 18 18 22 22 22 22 22 26d (PN16) 18 18 18 22 22 26 26 26 30n (PN10) 8 8 8 8 8 12 12 16 16n (PN16) 8 8 8 8 12 12 12 16 16L (mm) 42 45 55 55 68 75 80 90 100Wight (kg) 2.75 3.65 4.70 6.15 9.85 12.40 17.00 23.00 36.00

Legend: 1 - body of flange adapter,2 - flange adapter seal





FLANGE ADAPTER FOR DCI PIPES - RESTRAIN

WORKING PRESSURE: NP 10, with restrain flange 16/25 barFlanges drilled acc. to DIN 2501 PN 10/16 bar

Pos. Description Material Protection1 Restrain ring Ms or steel2 Restrain flange GGG - 40 Epoxy3 Gasket EPDM or NBR4 Body of flange adapter GGG 40 Epoxy

Serial No.2300- 703 704 706 707 708 709 710 711DN (mm) 80 100 150 200 250 300 350 400OD (mm) 98 118 170 222 274 326 378 429D (mm) 200 220 285 340 395 445 505 565Dk (mm) 160 180 240 295 350 400 460 515d (PN10) 18 18 22 22 22 22 22 26d (PN16) 18 18 22 22 26 26 26 30n (PN10) 8 8 8 8 12 12 16 16n (PN16) 8 8 8 12 12 12 16 16L (mm) 63 66 77 92 99 104 114 124





FLANGE ADAPTER FOR PE/PVC PIPES -RESTRAIN

WORKING PRESSURE: NP 10, with restrain flange 16/25 barFlanges drilled acc. to DIN 2501 PN 10/16 bar

Pos. Description Material Protection1 Restrain ring Ms or steel2 Restrain flange GGG - 40 Epoxy3 Gasket EPDM or NBR4 Body of flange adapter GGG 40 Epoxy

Serial No.2301- 003 004 007 008 009 010 015 014 011 012 013

DN (mm) 80 100 150 150 200 200 250 250 300 350 400OD (mm) 90 110 160 180 200 225 250 280 315 355 400D (mm) 200 220 285 285 340 340 395 395 445 505 565Dk (mm) 160 180 240 240 295 295 350 350 400 460 515d (PN10) 19 19 23 23 23 23 23 23 23 23 26d (PN16) 19 19 23 23 23 23 26 26 26 26 30n (PN10) 8 8 8 8 8 8 12 12 12 16 16n (PN16) 8 8 8 8 12 12 12 12 12 16 16L (mm) 63 66 77 77 92 92 99 99 104 114 124





UNIVERSAL SOCKETTYPE: E

WORKING PRESSURE: 10/16 barsCorrosion protection: Epoxy coating acc. to DIN 30677-T2Flanges drilled acc. to DIN 2501 PN 10/16 bar

Pos. Description Material1 Body GGG-40/502 Cover GGG-40/503 Seal EPDM / NBR4 Bolts (Steel gal. Zn) DIN 933 (or INOX on request)5 Washers (Steel gal. Zn) DIN 933 (or INOX on request)6 Nuts (Steel gal. Zn) DIN 933 (or INOX on request)

DN 50 80 100 150 200 200D 57-76 88-

107 108-128 158 - 183 198-225 226-252A 140 160 160 170 255 255

TYPE:NON RESTRAIN

TYPE:RESTRAIN

On buyer request we produce:- RESTRAIN type- NON RESTRAIN type





UNIVERSAL SOCKETTYPE: U - NEW TYPE


DN 80 100 150 200 200D 88 - 108 107 - 128 158 - 183 198 - 225 226 - 252A 235 235 265 330 330

Pos. Description Material1 Body GGG-40/502 Cover GGG-40/503 Seal EPDM / NBR4 Bolts (Steel gal. Zn) DIN 933 (or INOX on request)5 Washers (Steel gal. Zn) DIN 933 (or INOX on request)6 Nuts (Steel gal. Zn) DIN 933 (or INOX on request)

On buyer request we produce:- RESTRAIN type- NON RESTRAIN type





d1

A

d4

d3

d2

k

UNIVERSAL SOCKETTYPE: FG

WORKING PRESSURE: 10/16 barsMATERIAL: STEELCorrosion protection: Epoxy coating acc. to DIN 30677-T2Flanges drilled acc. to DIN 2501 PN 10/16 bar

DN 50 65 80 100 125 150 200 250 300 350A 350B 400A 400B

PN10bar

d1 59-72

72-85

82-107

107-133

132-153

158-192

218-252

266-300

315-349

352-374

378-400

400-430

425-442

d2 55 70 104 124 149 175 228 283 332 360 383 410 432d3 184 197 224 256 278 318 378 431 480 505 531 561 573d4 165 185 200 220 250 285 340 400 455 505 505 565 565k 125 145 160 180 210 240 295 350 400 460 460 515 515A 160 160 165 180 200 220 240 240 245 250 250 250 250Rupe 4 4 8 8 8 8 8 12 12 16 16 16 16

DIAMETER FROM ND 450 TO ND 1000 mm, WE PRODUCE BY REQUEST OF BUYER.BY REQUEST WE PRODUCE OTHER LENGTH (A).BY REQUEST WE PRODUCE ALSO NP 16 or 25/40 bar.

for PE/PVC pipes: for DCI, steel and AZ pipes:

On buyer request we produce restrain type





A

B

d2

d1

d1

UNIVERSAL SOCKETTYPE: GG

WORKING PRESSURE: 10/16 barsMATERIAL: STEELCorrosion protection: Epoxy coating acc. to DIN 30677-T2Flanges drilled acc. to DIN 2501 PN 10/16 bar

DN 50 65 80 100 125 150 200 250 300 350A 350B 400A 400B

PN10bar d1 59-

7272-85

82-107

107-133

132-153

158-192

218-252

266-300

315-349

352-374

378-400

400-430

425-442

d2 184 197 224 256 278 318 378 431 480 505 531 561 573A 240 240 240 270 290 310 330 345 350 360 360 360 360B 140 140 140 156 177 17 217 232 237 247 247 247 247Rupe 4 4 8 8 8 8 8 12 12 16 16 16 16

DIAMETER FROM ND 450 TO ND 1000 mm, WE PRODUCE BY REQUEST OF BUYER.BY REQUEST WE PRODUCE OTHER LENGTH (A).BY REQUEST WE PRODUCE ALSO NP 16 or 25/40 bar.

for PE/PVC pipes: for DCI, steel and AZ pipes:

On buyer request we produce restrain type





TELESCOPIC FLEXIBLE SOCKETDISMANTLING PIECE "MDK 4"


DIAMETER UP TO ND 1200 mm, WE PRODUCE BY REQUEST OF BUYER.BY REQUEST WE PRODUCE OTHER LENGTH (L max).BY REQUEST WE PRODUCE ALSO NP 16 or 25/40 bar.

DN 50 65 80 100 125 150 200 250 300

PN10

D 165 185 200 220 250 285 340 395 445k 125 145 160 180 210 240 295 350 400n 4 4 8 8 8 8 8 12 12d2 18 18 18 18 18 22 22 22 22

L1 min 170 170 170 170 170 225 240 240 240L1 max 225 225 225 225 225 300 310 310 310G [kg] 11 13 18 21 25 41 51 69 89

kD

DN

nd

2

L1





DISMANTLING PIECE MDK - type "A" (3)


Dismantling piece type "A"’ uses for connection of pipe and other type of fittings and forreinstallation of fittings and valves on pipeline installation, using the possibility adaptation oflength MDK type "A".

DIAMETER FROM ND 900 UP TO ND 1600 mm, WE PRODUCE BY REQUEST OF BUYER.BY REQUEST WE PRODUCE AND OTHER LENGTH (L1 max).BY REQUEST WE PRODUCE ALSO AND FOR: NP 16 or 25/40 bar.

DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800

PN10bara

L1min 155 155 175 175 175 175 195 195 195 205 205 235 235 235 265L1max 205 205 225 225 225 225 245 245 245 255 255 285 285 285 315L1 180 180 200 200 200 200 220 220 220 230 230 260 260 260 290G[kg] 9 12 15 17 20 29 37 43 52 72 91 118 152 190 260



flangeadapters - spatiul construit · company 'valmn o jv dep riz10,blga...

Documents