7.70

Exha

ust

7

Wiring Bypass Connector from pistorThis little item makes the usage of aftermar-ket exhausts or aircleaner systems possible. It overrules the engine electronic, warning lights will not come up after mounting aftermarket systems.681983 Bypass connector for aftermarket

exhaust systems681984 Bypass connector for aftermarket air-

cleaners

681984

681983

Stainless Steel O2 Sensor Bung and plugsImportant accessories if you are fitting an early exhaust without O2 sensor ports to a late model bike or a late exhaust to an early bike. Soldeach.18mmthreadsize.672534 Weld in sensor bung672535 Sensor bung plug

Weld-in Oxygen Sensor Bungs with Caps and O2 Sensor plugs by Zipper’sFor exhaust systems without installed O2 sen-sor bungs. Drill pipe and weld in. Sold each, tworequired.645546 Strait bung w/cap, each645547 Angled bung w/cap, each

O2 Sensor plugFor 10-Later Touring models with 12mm stock O2 sensors removed.645548 Bung cap set

645548

645547

645546

Oxygen Sensor Bung plugsUsedtosealunusedO2sensorbungs.Availablefor 18mm and 12mm bungs. Sold each. 688189 Sensor bung plug 18x1.5mm688190 Sensor bung plug 12x1.25mm

688189

Oxygen Sensor Socket ToolThis tool is used to remove or install the oxy-gensensoronallclosedloopfuelinjectedH.D.models. Socket has a 3/8" drive receiver or can be used with a 7/8" wrench. Socket will with-standupto125ft/lbsoftorque. 640091 For use on all EFI models 06-11 (except

10- touring)

JiMS exhaust Stud Drill plateGuides and aligns the drill bit when removing brokenexhauststuds.Usewithatapaftertoclean the threads. Can be used in the frame. Includes drill bit.20940 For Evolution and Twin Cam models

SCS O2 Sensor NutStainless steel 45° angled weld in nut with M18x1.5 45°.685298 SCS Weld Nut M18x1.5 45° S/S

NAMZ O2 Sensor Bung Reducers670859 Reducer for 18 mm to 12 mm