cll-series, lock nut cylinders - trident australia cll series 05-10.pdf · cll-series, lock nut...
TRANSCRIPT
CLL-Series, Lock Nut Cylinders
For this curved bridge, CLL-cylinders were used to support the concrete beams, to level the pierhead and to place 4000 ton slide bearings between pier and pierhead.
CLL cylinder, mechanically locked, after positioning the curved bridge.
Shown from left to right: CLL-5010, CLL-502, CLL-1006
• Single-acting, load return• Safety Lock Nut for mechanical load holding• Special synthetic coating for improved corrosion
resistance and lower friction for smoother operation• Overflow port functions as a stroke limiter• Interchangeable, hardened grooved saddles are standard• CR-400 coupler and dust cap included on all models.
To Secure Loads Mechanically
Saddles
All CLL cylinders are equipped with bolt-on removable grooved saddles. For information on optional
tilt saddles, see selection chart at next page.
Gauges
Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer to the
System Components Section for a full range of gauges.
Low Height - High Tonnage
When low height with high force is required, Pancake Cylinders with lock nut offer the solution to lift the first few centimetres.
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20012CLL-2502CLL-2506CLL-25012CLL-3002CLL-3006CLL-30012CLL-4002CLL-4006CLL-40012CLL-5002CLL-5006CLL-50012CLL-6002CLL-6006CLL-60012CLL-8002CLL-8006CLL-80012CLL-10002CLL-10006CLL-100012
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
15202530354030394856647353667892
10411783
117170116162234173233323250327441367466617446562737709870
1110949
11411430
3557091064141817732127664132719912654331839819931986297939724965595813303989799518325496109952281684313740280083991680036531095921930427712830256505882176453537073292198643980
70,970,970,970,970,970,9132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,81176,91176,91176,91466,41466,41466,4
5010015020025030050
10015020025030050
10015020025030050
15030050
15030050
15030050
15030050
15030050
15030050
15030050
150300
164214264314364414187237287337387437209259309359409459243343493249349499295395545335435585375475625395495645455555705495595745
Single-Acting, Lock Nut Cylinders
Stroke
(mm)
CylinderCapacity
ton(kN)
Cylinder Effective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
Collapsed Height
(mm) (kg)
CLL Series
Capacity:
50 - 1000 tonStroke:
50 - 300 mmMaximum Operating Pressure:
700 bar
QUICK SELECTION CHART For complete technical information see next page.
Higher Capacities
1500 and 2000 ton models are available on request.
Additional Stroke Lengths
Models above 150 ton are also available with standard stroke lengths of 100, 200 and 250 mm. Please contact Enerpac for ordering information.
Example:• For CLL-5006 cylinder with spring
return, order: CLL-5006E001
Technical specifications for these features are available from Enerpac.
Optional features
To add an optional feature to your cylinders, add the following suffix to the end of the model number.
Spring return E001
Speed Chart
See the Cylinder Speed Chart in our ‘Yellow Pages’ section to determine the approximate cylinder speed.
Lifting an Unbalanced Load?
See our ‘Yellow Pages’ for multi-cylinder set-ups.
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20012CLL-2502CLL-2506CLL-25012CLL-3002CLL-3006CLL-30012CLL-4002CLL-4006CLL-40012CLL-5002CLL-5006CLL-50012CLL-6002CLL-6006CLL-60012CLL-8002CLL-8006CLL-80012CLL-10002CLL-10006CLL-100012
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
70,970,970,970,970,970,9
132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
5010015020025030050
10015020025030050
10015020025030050
15030050
15030050
15030050
15030050
15030050
15030050
15030050
150300
355709
1064141817732127664
13271991265433183981993
1986297939724965595813303989799518325496
1099522816843
1374028008399
168003653
10959219304277
12830256505882
17645353707329
2198643980
CLL-3002 - CLL-100012
CLL-502 - CLL-25012
CLL-Series, Lock Nut Cylinders
Stroke
(mm)
CylinderCapacity
ton(kN)
Cylinder Effective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
For full features see previous page.
Couplers Included!
CR-400 couplers included on all models. Fit all HC-Series hoses.
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20012CLL-2502CLL-2506CLL-25012CLL-3002CLL-3006CLL-30012CLL-4002CLL-4006CLL-40012CLL-5002CLL-5006CLL-50012CLL-6002CLL-6006CLL-60012CLL-8002CLL-8006CLL-80012CLL-10002CLL-10006CLL-100012
717171717171717171717171130130130130130130130130130150150150195195195225225225250250250275275275320320320360360360
1520253035403039485664735366789210411783117170116162234173233323250327441367466617446562737709870111094911411430
363636363636444444444444444444444444505050565656606060707070808080858585100100100110110110
242424242424242424242424202020202020202020212121757575858585919191969696123123123136136136
CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800CAT-1000CAT-1000CAT-1000
303030303030303030303030393939393939505050505050595959707070808080858585100100100110110110
Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 184 x 6Tr 184 x 6Tr 184 x 6Tr 216 x 6Tr 216 x 6Tr 216 x 6Tr 241 x 6Tr 241 x 6Tr 241 x 6Tr 266 x 6Tr 266 x 6Tr 266 x 6Tr 305 x 6Tr 305 x 6Tr 305 x 6Tr 330 x 6Tr 330 x 6Tr 330 x 6Tr 387 x 6Tr 387 x 6Tr 387 x 6Tr 432 x 6Tr 432 x 6Tr 432 x 6
717171717171717171717171130130130130130130130130130150150150139139139159159159179179179194194194224224224249249249
222222222222222222222222555555555555555555
131313131313131313131313252525252525252525252525252525252525252525252525252525252525
125125125125125125165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560
214314414514614714237337437537637737259359459559659759293493793299499799345545845385585885425625925445645945505705
1005545745
1045
164214264314364414187237287337387437209259309359409459243343493249349499295395545335435585375475625395495645455555705495595745
95,095,095,095,095,095,0130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0184,0184,0184,0216,0216,0216,0241,0241,0241,0267,0267,0267,0305,0305,0305,0330,0330,0330,0387,0387,0387,0432,0432,0432,0
Single-Acting, Lock Nut Cylinders
ModelNumber
(kg)
Ext. Height
B(mm)
Cyl. Bore Dia.
E(mm)
PlungerDia.
(threaded)F
(mm)
Base to Adv. Port
H(mm)
Coll. Height
A(mm)
Outs. Dia.
D(mm)
* Optional Tilt SaddleDepth ofPlunger
HoleL
(mm)
Saddle Protr.
from Plgr.K
(mm)
Saddle Height
K1(mm)
Saddle ModelNumber
StandardSaddle
Dia.J
(mm)
Saddle Dia.J1
(mm)
Lock-nut
HeightS
(mm)
CLL Series
Optional Tilt Saddle * Capacity:
50 - 1000 tonStroke:
50 - 300 mmMaximum Operating Pressure:
700 bar
121 Vulcan Road, Canning Vale, Western Australia, 6155
elephone: +61 8 9456 1300 - Facsimilie: +61 8 9456 1400Email: [email protected]
Website: www.tridentaustralia.com.au