tcsd tmm .26 (6,6 mm) uuuuuuuuuuuuuuuuuuu tiger eye … · (2,00 mm) .0787" tcsd series tcsd...

(2,00 mm) .0787" TCSD SERIES

TCSD

TMM.26" (6,6 mm)

TCSD–08–D–02.00–01–N–R

WWW.SAMTEC.COMDue to technical progress, all designs, specifi cations and components are subject to change without notice.

Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM

TYPE STRIP

NO. PINSPER ROW

END OP TION

–“XX.XX”= Assembled Length

OTHEROPTION

–F = Gold fl ash on contact

Assembled Length in INCHES (±1/8")2 inches minimum

Leave blank for standard plating: 30µ" (0,76 µm) Gold on contact area

–04, –05, –06, –07,

–08, –10, –12, –13, –15, –17, –20, –22, –25

(Standard sizes)

01 PLATINGOPTION NLENGTH

Note: TCSD Seriesassemblies are non-standard, non-returnable.

–S= Single End

–D= Double End

(2,00).0787

No. of positions x (2,00) .0787 + (4,00) .157

(5,08).200

(2,00).0787

(1,00) .039

(4,00).158

01

(3,17).125(1,02)

.040

–N= Notch Polarization

For complete specifi cations see www.samtec.com?TCSD

Insulator Ma te ri al:Black Glass Filled PolyesterContact: BeCuPlating: Au or Sn over 50µ" (1,27 µm) NiWire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC InsulatorCurrent Rating (TCSD/STMM): 2.8 A per pin(1 pin powered per row)Operating Temp Range:-40°C to +105°CLead Size Accepted:(0,48 mm) .019" to (0,53 mm) .021" Contact Re sis tance:15 mΩInsertion Depth:(2,87 mm) .113" to (3,17 mm) .125"RoHS Compliant: Yes

EJECTOR HEADERS & LOCKING CLIPS

See TMM Series.

See EHT Series.

TCSD= Socket Strip

–O= Outside Reverse

4

5

5

Requires –DXX 5

Requires –DXX

3

–P “XX”= Position Po lar iza tion

–RW= Reverse Wiring

1

Not available with –O, –M, –R, –DXX or –BXX

Blue or black wire opposite position #1.

2

–B “XX”= Breakout

–M= Middle Reverse

–R= Reversed

–SR= Strain Relief

–D “XX”= Daisy Chain

No. of positions x (2,00) .0787 + (7,874) .3100

Specify “XX” as position number. Same position will be polarized on both ends.

01

02

“XX”

5"max.2"min.

Specify “XX” as number ofconductors to be broken out.

Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side.

2" min.

4" minimum

“XX” 1/8" Double Row Con nec tors

Outer Most(End of as sem bly)

01

02

SPECIFICATIONS

TIGER EYE™ IDC SOCKET CABLE

™

• Ejector headers

• Locking clips

• Strain relief option

F-215

For complete scope of recognitions see www.samtec.com/quality

RECOGNITIONS

POLARIZING KEY

Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips.

ALSO AVAILABLE(MOQ Required)

• Other sizes• Other platingsContact Samtec.