tcsd tmm .26 (6,6 mm) uuuuuuuuuuuuuuuuuuu tiger eye … · (2,00 mm) .0787" tcsd series tcsd...
TRANSCRIPT
(2,00 mm) .0787" TCSD SERIES
TCSD
TMM.26" (6,6 mm)
TCSD–08–D–02.00–01–N–R
WWW.SAMTEC.COMDue to technical progress, all designs, specifi cations and components are subject to change without notice.
Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM
TYPE STRIP
NO. PINSPER ROW
END OP TION
–“XX.XX”= Assembled Length
OTHEROPTION
–F = Gold fl ash on contact
Assembled Length in INCHES (±1/8")2 inches minimum
Leave blank for standard plating: 30µ" (0,76 µm) Gold on contact area
–04, –05, –06, –07,
–08, –10, –12, –13, –15, –17, –20, –22, –25
(Standard sizes)
01 PLATINGOPTION NLENGTH
Note: TCSD Seriesassemblies are non-standard, non-returnable.
–S= Single End
–D= Double End
(2,00).0787
No. of positions x (2,00) .0787 + (4,00) .157
(5,08).200
(2,00).0787
(1,00) .039
(4,00).158
01
(3,17).125(1,02)
.040
–N= Notch Polarization
For complete specifi cations see www.samtec.com?TCSD
Insulator Ma te ri al:Black Glass Filled PolyesterContact: BeCuPlating: Au or Sn over 50µ" (1,27 µm) NiWire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC InsulatorCurrent Rating (TCSD/STMM): 2.8 A per pin(1 pin powered per row)Operating Temp Range:-40°C to +105°CLead Size Accepted:(0,48 mm) .019" to (0,53 mm) .021" Contact Re sis tance:15 mΩInsertion Depth:(2,87 mm) .113" to (3,17 mm) .125"RoHS Compliant: Yes
EJECTOR HEADERS & LOCKING CLIPS
See TMM Series.
See EHT Series.
TCSD= Socket Strip
–O= Outside Reverse
4
5
5
Requires –DXX 5
Requires –DXX
3
–P “XX”= Position Po lar iza tion
–RW= Reverse Wiring
1
Not available with –O, –M, –R, –DXX or –BXX
Blue or black wire opposite position #1.
2
–B “XX”= Breakout
–M= Middle Reverse
–R= Reversed
–SR= Strain Relief
–D “XX”= Daisy Chain
No. of positions x (2,00) .0787 + (7,874) .3100
Specify “XX” as position number. Same position will be polarized on both ends.
01
02
“XX”
5"max.2"min.
Specify “XX” as number ofconductors to be broken out.
Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side.
2" min.
4" minimum
“XX” 1/8" Double Row Con nec tors
Outer Most(End of as sem bly)
01
02
SPECIFICATIONS
TIGER EYE™ IDC SOCKET CABLE
™
• Ejector headers
• Locking clips
• Strain relief option
F-215
For complete scope of recognitions see www.samtec.com/quality
RECOGNITIONS
POLARIZING KEY
Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips.
ALSO AVAILABLE(MOQ Required)
• Other sizes• Other platingsContact Samtec.