· 2012-10-16 · super 2 frames complete with uprights, horizontal and diagonal bracing load...
TRANSCRIPT
The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearing indication isvalid and applicable for a use of the beams with modular shelves and/or modular containers only.
SUPER 1
FRAMES COMPLETEWITH UPRIGHTS,HORIZONTAL AND DIAGONALBRACINGLOAD BEARING CAPACITYKg. 1500 EACH
Regarding technical data, standardspecifications and assembly diagram,please refer to pages 4/5 of the SUPERbrochure.
PATENTED BOLTFREE SHELVING SYSTEM
700017000470007
197225003028
heightmm
horizontal and diagonalspacer bars
568
700107001370016
197225003028
568
700197002270025
197225003028
568
700287003170034
197225003028
568
700377004070043
197225003028
568
700467004970052
197225003028
568
Ref. 2
Ref. 2
UPRIGHTS1
Ref. 3
100011000410007
197225003028
BEAM S1
300013000330004300053000730008
280235205180145120
Load <daN> per pairuniformly distrib.load
90010501200135015001650
depthmm
320320320
400400400
500500500
600600600
700700700
800800800
heightmm
component
component lengthmm
component
The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearing indication isvalid and applicable for a use of the beams with modular shelves and/or modular containers only.
Ref. 3
BEAM S-O
30001L30003L30004L
200170150
Load <daN> per pairuniformly distrib.load
90010501200
component lengthmm
38
SUPER 1 PATENTED BOLTFREE SHELVING SYSTEM
depthmm
lengthmm
320400500600700
320400500600700
320400500600700
8000180004800078001080013
8001480015800168001780018
8001980022800258002880031
900900900900900
10501050105010501050
12001200120012001200
200200185150130
170170170170155
150150150150150
COMPLETE SHELVESWITH BEAMS S-OAND PANELS H 12 mm
Regarding technical dataand standard specifications,please refer to pages 4/5.
component
Ref. 5
Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
400500600700
400500600700
80004A80007A80010A80013A
80022A80025A80028A80031A
900900900900
1200120012001200
200200200200
150150150150
COMPLETE SHELVESWITH BEAMS S-OAND PANELS H 25/A
Regarding technical dataand standardspecifications,please referto pages 4/5.
component
Ref. 6
Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
320400500600700
320400500600700
320400500600700
8050180504805078051080513
8051980522805258052880531
8053780540805438054680549
900900900900900
12001200120012001200
15001500150015001500
280235185150130
205205205205180
145145145145145
COMPLETE SHELVESWITH BEAMS S1AND PANELS H 12 MM
Regarding technical dataand standard specifications,please refer to pages 4/5 .
component
Ref. 5
Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
400500600700800
400500600700800
80504A80507A80510A80513A80516A
80522A80525A80528A80531A80534A
900900900900900
12001200120012001200
280280280280230
205205205205180
COMPLETE SHELVESWITH BEAMS S1AND PANELS H 25/A
Regarding technical dataand standardspecifications,please referto pages 4/5.
component
Ref. 6
Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
400500600700800
80540A80543A80546A80549A80552A
15001500150015001500
145145145145130
component Load capacity <daN>uniformly distrib.load
39
SUPER 2
FRAMES COMPLETEWITH UPRIGHTS,HORIZONTAL AND DIAGONALBRACINGLOAD BEARING CAPACITYKg. 2000 EACH
Regarding technical data, standardspecifications and assembly diagram,please refer to pages 4/5 of the SUPERbrochure.
PATENTED BOLTFREE SHELVING SYSTEM
71001710047100771010
1972250030283424
Ref. 2
568
10
71016710197102271025
1972250030283424
568
10
71031710347103771040
1972250030283424
568
10
71046710497105271055
1972250030283424
568
10
71061710647106771070
1972250030283424
568
10
71076710797108271085
1972250030283424
568
10
Ref. 2
UPRIGHTS2
11001110041100711010
1972250030283424
heightmm
320320320320
400400400400
500500500500
600600600600
700700700700
800800800800
component
depthmm
heightmm
horizontal and diagonalspacer bars
component
BEAM S2
315013150331504315053150731508
90010501200135015001650
lengthmm
Load <daN> perpair
uniformly distrib.load390335275220175145
component
Ref. 3 The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearingindication is valid and applicable for a use of the beams with modular shelves and/or modular containers only.
40
SUPER 2 PATENTED BOLTFREE SHELVING SYSTEM
COMPLETE SHELVESWITH BEAMS S2AND PANELS H 12
Regarding technical dataand standard specifications,please refer to pages 4/5of the SUPER brochure.
Ref. 5
depthmm
lengthmmCOMPLETE SHELVES
WITH BEAMS S2AND PANELS H 25/A
Regarding technical dataand standard specifications,please refer to pages 4/5.
component
Ref. 6
Load capacity <daN>uniformly distrib.load
component depthmm
lengthmm
Load capacity <daN>uniformly distrib.load
8100181004810078101081013
8101981022810258102881031
8103781040810438104681049
900900900900900
12001200120012001200
15001500150015001500
320400500600700
320400500600700
320400500600700
305235185150130
275275260210180
175175175175175
400500600700800
400500600700800
400500600700800
81504A81507A81510A81513A81516A
81522A81525A81528A81531A81534A
81540A81543A81546A81549A81552A
900900900900900
12001200120012001200
15001500150015001500
390390345285230
275275275275250
175175175175160
41
SUPER 3
FRAMES COMPLETEWITH UPRIGHTS,HORIZONTAL AND DIAGONALBRACINGLOAD BEARING CAPACITYKg. 3600 EACH
Regarding technical data, standardspecifications and assembly diagram,please refer to pages 4/5 of theSUPER brochure.
PATENTED BOLTFREE SHELVING SYSTEM
72001720047200772010720137201672019
1972250030283424395244805008
depthmm
heightmm
horizontal and diagonalspacer bars
320320320320320320320
568
10111315
72085720887209172094720977210072103
1972250030283424395244805008
depthmm
heightmm
horizontal and diagonalspacer bars
700700700700700700700
568
10111315
Ref. 2
72022720257202872031720347203772040
1972250030283424395244805008
400400400400400400400
568
10111315
72106721097211272115721187212172124
1972250030283424395244805008
800800800800800800800
568
10111315
72043720467204972052720557205872061
1972250030283424395244805008
500500500500500500500
568
10111315
32501325033250432505325073250832510
450385320255205170140
lengthmm
load capacity kgper pair, u.d.l
UPRIGHTS3
Ref. 2
BEAM S3
Ref. 3
900105012001350150016501800
heightmm
component component
component
component
72064720677207072073720767207972082
1972250030283424395244805008
600600600600600600600
568
10111315
The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearingindication is valid and applicable for a use of the beams with modular shelves and/or modular containers only.
1972250030283424395244805008
12001120041200712010120131201612019
42
SUPER 3
COMPLETE SHELVESWITH BEAMS S3AND PANELS H 12
Regarding technical dataand standard specifications,please refer to pages 4/5.
PATENTED BOLTFREE SHELVING SYSTEM
Ref. 5
COMPLETE SHELVESWITH BEAMS S3AND PANELS H 25/A
Regarding technical dataand standard specifications,please refer to pages 4/5.
Ref. 6
8200182004820078201082013
depthmm
lengthmm
900900900900900
320400500600700
Load capacity <daN>uniformly distrib.load
305235185150130
8201982022820258202882031
320400500600700
320320260210180
12001200120012001200
component
8203782040820438204682049
320400500600700
205205205205205
15001500150015001500
depthmm
lengthmm
Load capacity <daN>uniformly distrib.load
82504A82507A82510A82513A82516A
450420345285230
82522A82525A82528A82531A82534A
320320320320290
900900900900900
400500600700800
400500600700800
12001200120012001200
component
82540A82543A82546A82549A82552A
205205205205180
400500600700800
15001500150015001500
82564A82567A82570A82573A
140140140140
400500600700
1800180018001800
8205582058820618206482067
320400500600700
140140140140140
18001800180018001800
43
Ref. 6 bis
BEAM S3 G component
3500435007
640530
lengthmm
Load <daN> per pairuniformly distrib.load
15001800
The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearingindication is valid and applicable for a use of the beams with modular shelves and/or modular containers only.
SUPER 1-2-3 PATENTED BOLTFREE SHELVING SYSTEM
DIAGONAL SPACER BAR
430014300443007430104301343016
320400500600700800
depthmm
component
HORIZONTALSPACER BAR
410014100441007410104101341016
320400500600700800
depthmm
component
Ref. 2
Ref. 2
BEAM S2G
3400434007
15001800
lengthmm
Load <daN> per pairuniformly distrib.load
520430
component
Ref. 6 bis The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearingindication is valid and applicable for a use of the beams with modular shelves and/or modular containers only.
BEAM S1G
3260432607
350310
Load <daN> per pairuniformly distrib.load
15001800
component lengthmm
Ref. 6 bis The load bearing capacity of the beams is to be understood as referring to uniformly distributed loads, per pair of beams. The load bearing indication isvalid and applicable for a use of the beams with modular shelves and/or modular containers only.
LOCKING FRAMESPACER BAR
Ref. 1B
component depthmm
670316703267033670346703567036
320400500600700800
44
SUPER 1-2-3 PATENTED BOLTFREE SHELVING SYSTEM
depthmm
lengthmm
320400500600700
320400500600700
8311683119831228312583128
8313183134831378314083143
15001500150015001500
18001800180018001800
350350315260220
310310310305260
component Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
400500600700800
400500600700
83340A83343A83346A83349A83352A
83364A83367A83370A83373A
15001500150015001500
1800180018001800
350350350350350
310310310310
COMPLETE SHELVESWITH BEAMS S1GAND PANELS H 25/A
Regarding technical dataand standard specifications,please referto pages 4/5.
component
Ref. 6 bis
Load capacity <daN>uniformly distrib.load
depthmm
lengthmm
400500600700800
400500600700
83540A83543A83546A83549A83552A
83564A83567A83570A83573A
15001500150015001500
1800180018001800
520520520520425
430430430430
COMPLETE SHELVESWITH BEAMS S2GAND PANELS H 25/A
Regarding technical dataand standard specifications,please referto pages 4/5.
component
Ref. 6 bis
Load capacity <daN>uniformly distrib.load
Ref. 6 bis Ref. 6 bis
COMPLETE SHELVESWITH BEAMS S3GAND PANELS H 25/A
Regarding technical data and standardspecifications,please refer to pages 4/5.
COMPLETE SHELVESWITH BEAMS S3GAND PANELS H 25/B
Regarding technical data andstandard specifications,please refer to pages 4/5.
depthmm
lengthmm
component Load capacity <daN>uniformly distrib.load
400500600700800
400500600700
84540A84543A84546A84549A84552A
84564A84567A84570A84573A
15001500150015001500
1800180018001800
640640640475425
530530530530
depthmm
lengthmm
component Load capacity <daN>uniformly distrib.load
400500600700800
400500600700
84540B84543B84546B84549B84552B
84564B84567B84570B84573B
15001500150015001500
1800180018001800
640640640550475
530530530530
Ref. 6 bis
COMPLETE SHELVESWITH BEAMS S1GAND PANELS H 12 mm
Regarding technical dataand standard specifications,please referto pages 4/5.
45
46
5170151704517075171051713
320400500600700
Ref. 5 Ref. 5
5110151104511075111051113
320400500600700
5160151604516075161051613
320400500600700
SUPER 1-2-3
SHELVES300 MM WIDEH 25mm/A
SHELVES450 MM WIDEH 12 MM
depthmm
Accessories for series SUPER 1-2-3
SHELVES300 MM WIDEH 25mm /B
SHELVES900 MM WIDEH 12 MM
Ref. 5
Ref. 6 Ref. 6
BACK/END PANEL H 25
Ref. 26
620016200462007
625016250462507
1485x2001940x2002480x200
1485x3001940x3002480x300
PUNCHED HOLEBACK/END PANEL H 25
Ref. 26
627016270462707
629016290462907
1485x2001940x2002480x200
1485x3001940x3002480x300
BACK PANEL H 12FOR BACK-TO-BACK-BAYS
Ref. 29 Ref. 29
COMPENSATION BACK PANEL H 12 FORBACK-TO-BACK-BAYS
height x depthmm
630016300463007
635016350463507
1485x6001940x6002480x600
1485x9001940x9002480x900
636016360463607
637016370463707
1485x6001940x6002480x600
1485x9001940x9002480x900
FASTENING CLIP FOR ENDPANEL H 25 - Ref. 28
68107
depthmm
depthmm
component component component
component height x depthmm
component height x depthmm
component height x depthmm
component
component
SHELVES300 MM WIDEH 25mm /C
Ref. 6
depthmm
component
FASTENING CLIP FOR BACKPANEL H 25 - Ref. 27
68108
component
FASTENING CLIP FOR H12CLADDING - Ref. 27
67010
component
PUNCHED HOLESHELVES300 MM WIDEH 25 FLANGED ENDS
depthmm
component
component
5230152304523075231052313
5250152504525075251052513
400500600700800
5240152404524075241052413
400500600700800
depthmm
component
400500600700800
depthmm
thickness
69220 300 6/10
SHELVES600 MM WIDEH 12 MM
47
SUPER 1-2-3 Accessories for series SUPER 1-2-3
CROSS BRACING SUPER 1/2/3 SHELVINGRegarding design, calculation, assembly instructions and ordering, please refer to the technical manual“ISQ03_04/C-012 - CROSS BRACINGS FOR LIGHT DUTY SHELVING”
CROSS BRACING SUPER 1/2/3 SERIESCross bracings (horizontal and vertical ones) have to be used in SUPER 1/2/3 shelving structures with frame heights exceeding3000 mm. The sketches shown above explain the make up and assembly of the cross bracing concept referring to a 3000 mmhigh frame within a single and double sided shelving row.
68053
component
68051
component
DIAGONALSPACER BARSFOR CROSS BRACING
68049
component
SCREW6x16 mm
SCREW6x30 mm
00027
component
CROSS BRACING SUPER1/2/3 SERIES
2
4
3
1
6
00035
component
SCREW6x70 mm
00036
component
NUT 6 mm
00020
component
5
MACROCODE 67023 for single sided shelving.The macrocode 67023 comprises all components shownin the sketch, except items 2-3
item
680516805300020000270003500036
Macrocode 67023q.ty
68281684
MACROCODE 67024 for double sided shelving.The macrocode 67024 comprises all components shownin the sketch, except items 2-3
item
680516805300020000270003500036
Macrocode 67024q.ty
8124024106
5
CROSS BRACINGFASTENINGBRACKET
SIDE CLADDING
height x depthmm
Ref. 30
component
U-SHAPE PROFILE
for H25for H29for H58for H68
component lengthmm
69800698016980769808
4000400040004000
Ref. 31
H-SHAPE PROFILE
for H25for H29for H58
component lengthmm
698036980469810
400040004000
Ref. 31
1485 x 3201940 x 3202480 x 320
1485 x 4001940 x 4002480 x 400
1485 x 5001940 x 5002480 x 500
1485 x 6001940 x 6002480 x 600
1485 x 7001940 x 7002480 x 700
1485 x 8001940 x 8002480 x 800
675016750467507
675106751367516
675196752267525
675286753167534
675376754067543
675466754967552
length x height mm
component
LOCKABLE DOOR,GREY
682016820468207
682106821368216
900x2000H1200x2000H1500x2000H
900x2500H1200x2500H1500x2500H
Ref. 56 Page 35
heightmm
component
MOBILE LADDER& GUIDE RAIL
2500H3000HGuide railL = 4000
CURVE
NUT AND BOLT
69825
component length
6 x 20
SELFDRILLINGSCREW
69834
component
FLOOR FIXINGDOWEL
08005
component length
8 x 50
TURNBUCKLE(1/2 component)FOR CROSS BRACING
SUPER 1-2-3 Accessories for series SUPER 1-2-3
OVAL HANDRAIL TUBE
67401 for walkway end67402 for inside end frame
For walkway ends, order art.n° 67401, specifying the lengthof the spacer bars used to buildthe walkway.In the case of end frames, order art.n° 67402, specifying the lengthof the spacer bar used to build theframe. For handrails between bayuprights order the oval tubularbeam in material gauge 10/10 mm,article numbers 36501 - 36510 (seebelow).
SPACER BAR FORINSERT TUBES
OVAL INSERT TUBESFOR SPACER BARS
ROW SPACER TIE BAR(clear span)
depthmm
Q.ty of notches to locateoval insert tubes
lengthmm
OVAL SHAPED BEAMS
Ref. 20
BEAM RETAINING CLIP FORBACK-TO-BACK BAYSRef. 25
METAL BASEPLATE SHIMSRef. 1
METAL BASE PLATE
Ref. 1
SPECIAL METALBASE PLATERef. 1
67000
67001
67006
PLASTIC BASE PLATE
Ref. 1
67004
PLASTIC BASE PLATE / TOP CAPFOR DOUBLE UPRIGHTSRef. 1
67005
walkway
end frames
between bay uprights(see shelf boards)
component
component
Ref. 49
component
component
component
component
component
component
component
Ref. 19 Ref. 19
KICK BOARD
67405 for walkway end67404 for inside end frame67403 between bay uprights
walkway - 67405
end frames - 67404
between bay uprights - 67403
component
The kick boards are made from twooval tubular beams (the same usedto create the handrails) fixed to theuprights and a sheet metal elementfastened to the oval tubularbeams with self tapping screws (art.n° VITAUFOR).For walkway ends, order art.n° 67405, specifying the length of thespacer bars used to build thewalkway. For end frames, order art.n° 67404, specifying the length ofthe spacer bars used to buildthe frames. As for longitudinalkick boards, order art. n° 67403,specifying the length of the ovaltubular beam.
678216782267823678246782567826
320400500600700800
3579
1113
67421674246742767430
900120015001800
67400 clear span
Lengthmm
Load Cap. (kg)u.d.l. per beam
36501365043650736510
900120015001800
1751207552
component
10/1010/1010/1010/10
Mat. Gaugemm
Load Cap. (kg)u.d.l. per beam
36801368043680736810
29520013090
component
18/1018/1018/1018/10
Mat. Gaugemm
Att.: regarding design and load bearing capacityplease refer to "METALSISTEM INFORMA" n° 296.
depthmm
component
PVC TOP CAP FORSINGLE UPRIGHTSRef. 20
component
68055
67017
BEAM RETAININGCLIPRef. 22
component
67016
Regarding design and load bearing capacity please refer to "METALSISTEMINFORMA" n° 292.In the case that the oval shaped beams are used for tyre storage, please referto "METALSISTEM INFORMA" n° 353 regarding correct design, applicationand load bearing capacities.
48
walkway - 67401
end frames - 67402
between bay uprights
SUPER 1-2-3 Accessories for series SUPER 1-2-3
SHELF BOARD
Ref. 40
height x lengthmm
200 x 900200 x 1200200 x 1500200 x 1800
300 x 900300 x 1200300 x 1500300 x 1800
BIN FRONT OR REARFOR SHELF TRAYS
Ref. 13
component
64101641046410764110
64113641166411964122
100 x 900100 x 1000100 x 1200100 x 1500
200 x 900200 x 1000200 x 1200200 x 1500
DIVIDERH100/ H200FOR SHELFTRAYS
Ref. 17 Ref. 14
PROFILEDDIVIDERSH 200/100FOR SHELF TRAYS
Ref. 13
depthmm
320400500
heightmm
280 inner280 outer560 inner560 outer
height x lengthmm
component
64016640196402264025
64031640346403764040
component
67290672936729667299
component
671816718467187
TELESCOPIC TUBE DIVIDERSinner and outer
DIVIDERSFOR MODULARCONTAINERS
Ref. 9-10
depthmm
component
615176151861519615206152161522
320400500600700800
MODULARCONTAINERS
610176101861019610206102161022
load capacitykg
909070656060
depthmm
320400500600700800
component
Ref. 9-10
TRAPEZ.SLIDINGDIVIDER
320400500600700800
depthmm
component
671706717267174671766717867180
CLIPS FOR SLIDINGDIVIDERS
component
68112 at right68113 at left
SLIDING DIVIDERH100/200 MM
depthmm
320400500600700800
320400500600700800
heightmm
100100100100100100
200200200200200200
component
672006720467206672086721067212
672206722267224672266722867230
320400500600700800
DIVIDER FOREXHAUST PIPESRef. 18
component
67301 horizontal67302 vertical
lengthmm
component depthmm
666666
666666
165165165
165165165
678306783167832
678336783467835
678366783767838
678396784067841
900900900
120012001200
900900900
120012001200
400500600
400500600
400500600
400500600
component
666666
165165165
67842B67843B67844B
67842A67843A67844A
400500600
400500600
component lengthmm
666666
666666
165165165
165165165
67845B67846B67847B
67848B67849B67850B
67845A67846A67847A
67848A67849A67850A
50100150
200300400
50100150
200300400
DRAWER PERFORATEDDRAWER WALL
DIVIDERFOR DRAWER
Page 18Page 11/19
Page 18
Ref.11
Ref.11
Ref.11
320400500600700800
671516715467157671606716267164
671526715367155671566715867159
200200200200200200
100100100100100100
depthmm
600700800
component
671906719267194
heightmm
49
heightmm
heightmm
depthmm
component depthmm
component depthmm
heightmm
heightmm
SUPER 1-2-3 Accessories for series SUPER 1-2-3
FIXED HEIGHT DIVIDERS
Ref. 16
component
T-SECTIONSUPPORT BRACKETRef. 36
component
67022
HANDRAIL TUBE Ø 32 MMLENGTH = 6000 MMRef. 45
component
65019
depthmm
heightmm
677206772267724677266772867730
320400500600700800
244244244244244244
677406774267744677466774867750
320400500600700800
344344344344344344
677606776267764677666776867770
320400500600700800
444444444444444444
PVC PLUGFOR HANDRAILRef. 45
component
65016
CLIPS FOR FIXEDHEIGHT DIVIDERSRef. 16
component
68110 double-sided68111 single-sided
TOP CAP FOR T-SECTIONSUPPORT BAR H58Ref. 38
component
67026
Ref. 35
component
67015
WALKWAY SUPPORTT-SECTION H58 FOR WALKWAYSLENGTH = 6200 MM
FRAME BACK-TO-BACKCLAMPSRef. 24
WALKWAY SUPPORTT-SECTION BEAM - H58(inner frame)
Ref. 36-37
component
673206732267324
lengthmm
90012001500
PLASTIC STRIP FOR TYRESLENGTH = 3000 MMRef. 21
component
67020
Ref. 35
component
67021
CHIPBOARD CLIP
Ref. 8
component
67025
REINFORCING UPRIGHT S3 FORSTAIRCASES/TWO-TIER-STRUCTURESRef. 44
component
99230
REINFORCING BRACKETFOR UPRIGHTSRef. 50
component
65023
WALL FASTENINGBRACKETRef. 34
component
65022
PLASTIC LABELHOLDERRef. 23
component
67008
NOISE DAMPENING ADHESIVE STRIPLENGTH = 10 METERS
load capacity kg - per pairunif. distr. load
1000750600
WALKWAY BEAM
Ref. 57
component
99253B
lengthmm
for correct use, assembly and loadbearing capacity indication pleaserefer to the document "ISTM-025"
PVC HANDRAIL JOINT - 65 MM
Ref. 48
69840
component
PVC JOINT FOR HANDRAILINTERSECTION AT RIGHT
Ref. 48
69837
component
PVC JOINT FOR HANDRAILINTERSECTION AT LEFT
Ref. 48
69843
component
q.ty
65000
65002650040005900017000050002065003
1
1122222
HANDRAIL SUPPORT BRACKETFOR STAIRCASES
Ref. 45-46
macrocodecomposed of:handrail supportrunner supportm 10 nut3,5x13mm self tapping screwM6x20 hex bolt 8,8 DIN933 ZpM6 nut DIN934 Zphandrail bracket angle
STEEL PLANKFIXING BRACKETRef. 54 page 37
steel plank clampm8x16 bolt
bracket up to 20 mm +m8x20 boltbracket up to 40 mm +m8x20 boltbracket up to 60 mm +m8x20 bolt
6982969824
698616986269863
component
50
SIMPLY SUPER - DO-IT-YOURSELF - PATENTED BOLTLESS SHELVING KITS
BULL SERIES - PLASTIC BINS - Ref. page 19
L. 105 x D. 88/70 x H. 54
Package of 100 pcs.
BULL2BULL 1
BULL 3
L. 105 x D. 167/140 x H. 82
Package of 48 pcs.
L. 144 x D. 237/190 x H. 123
Package of 38 pcs.
L. 205 x D. 345/270 x H. 164
Package of 24 pcs.
BULL 4/D
BULL 4 BULL 5
L. 406 x D. 345/270 x H. 164can be equipped with 1, 2 or 3 mobile dividersPackage of 8 pcs.
L. 298 x D. 485/400 x H. 189
Package of 12 pcs.
L. 372 x D. 600/460 x H. 250
Package of 4 pcs.
BULL 6/DBULL 6
L. 442 x D. 700/540 x H. 300
Package of 4 pcs.
BULL 7BULL 7/D
Open fronted bins with very strong structure.Easily to be placed one upon another.Large front label holder.Made from high density polyethylene, for use inenvironments ranging from -40°C up to +80°C.Fracture and breakage proof.Resistant to acids, oils, solvents and detergents.Ergonomic line with comfortable handles for lifting.Base completely flat and anti-skid.Full length return to clip to louvred panels.Brilliant colours and agreeable design.
COLOURS
green
blue
red
yellow
grey
BULL 1 BULL 2 BULL 3 BULL 4BULL 4/D BULL 5 BULL 6
BULL 6/DBULL 7
BULL 7/D
= horizontal connection element(only for BULL 6 - 6/D and BULL 7 - 7/D)*****
SIMPLY SUPER is made from prime quality high tensilesteel, certified according to EN 10204 3.1B.
“SIMPLY SUPER” aredo-it-yourself shelving kits,conceived for easy use withinthe domestic environment.
SIMPLY SUPER is available intwo different heights - 1840 and1576 mm - with 5 or 4 shelflevels in height, respectively.
Star ter bays can be easilyintegrated with add-on-bays. Allof them in 900 mm width and400 mm depth.Shelves can be regulated inheight at a 33 mm pitch.
= available without fixed divider = available with fixed divider
51
NR.
EDIZ
IONE
DATA
EDI
ZION
ENR
. RE
VISI
ONE
DATA
REV
ISIO
NEDA
TA S
TAM
PA03
12/2
004
0000
06/2
005