z8 encore! xp 8k series development kit - digi-key sheets/zilog pdfs... · · 2006-11-15•...

ZiLOG WorTelephon

Z8 Encore! XP® F08xA Series Development Kit

Z8F08A28100KIT

User Manual
UM018603-1005
ldwide Headquarters • 532 Race Street • San Jose, CA 95126e: 408.558.8500 • Fax: 408.558.8300 • www.ZiLOG.com

http://www.ZiLOG.com

Z8 Encore! XP® F08xA Series Development KitUser Manual

This publication is subject to replacement by a later edition. To determine whether a later edition exists, or to request copies of publications, contact:

ZiLOG Worldwide Headquarters532 Race StreetSan Jose, CA 95126Telephone: 408.558.8500Fax: 408.558.8300www.ZiLOG.com

Document DisclaimerZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated.©2005 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZiLOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. Devices sold by ZiLOG, Inc. are covered by warranty and limitation of liability provisions appearing in the ZiLOG, Inc. Terms and Conditions of Sale. ZiLOG, Inc. makes no warranty of merchantability or fitness for any purpose Except with the express written approval of ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No licenses are conveyed, implicitly or otherwise, by this document under any intellectual property rights.

UM018603-1005


iii

Revision HistoryEach instance in Table 1 reflects a change to this document from its previ-ous revision. To see more detail, click the appropriate link in the table.

Table 1. Revision History of this Document

DateRevision Level Section Description Page #

Feb. 2005

2 Introduction Corrected typo in development kit name. 1

October 2005

3 F08xA Series Development Boar

Corrected typo in the MCU features list; updated schematic for board rev C.

8, 13

UM018603-1005 Revision History


iv

SafeguardsThe following precautions must be observed when working with the devices described in this document.

Always use a grounding strap to prevent damage resulting from electrostatic discharge (ESD).

Caution:

Safeguards PRELIMINARY UM018603-1005


v

Table of ContentsRevision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

List of Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Software (on CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

System/Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Supported Host System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

F08xA Series Development Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8UART with IrDA Endec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Power and Communication Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . .10External Interface Headers JP1 and JP2 . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

UM018603-1005 Table of Contents


vi

Table of Contents UM018603-1005


v

List of FiguresFigure 1. Z8 Encore! XP® F08xA Series Development Kit Contents .2

Figure 2. Z8 Encore! XP® F08xA Series Development Board . . . . .7

UM018603-1005 List of Figures


vi

List of Figures UM018603-1005


1

IntroductionThe Z8 Encore! XP® F08xA Series MCU is part of the line of ZiLOG microcontroller products.

The Z8 Encore! XP® F08xA Series MCU Development Kit (Z8F08A28100KIT) enables users to become familiar with the hardware and software tools available with this product. This kit consists of the 8KB version of the Z8 Encore! Development board that supports and pre-sents the features of the Z8 Encore! XP F08xA Series. This kit allows users to begin writing application software and contains all supporting documents.

This manual acquaints users with the Z8 Encore! XP F08xA Series MCU Development Kit, and gives instructions on setting up and using the tools to start building designs and applications.

Kit ContentsThe Z8 Encore! XP F08xA Series MCU Development Kit contains the following:

Hardware• Z8 Encore! XP F08xA Series Development board

• Serial Smart Cable for PC to Z8 Encore! XP F08xA Series Develop-ment board (DB9 to six-pin male)

• 5VDC power supply

UM018603-1005 Introduction


2

Figure 1. Z8 Encore! XP® F08xA Series Development Kit Contents

Software (on CD-ROM)• ZDS II- Z8 Encore!® IDE with ANSI C-Compiler

• Sample code

• Document browser

• Acrobat Reader install program

Documentation• Quick Start Guide

• Registration card

• Z8 Encore! XP F08xA Series technical documentation (on CD-ROM)

DevelopmentBoard

Packaging

CD-ROM ContainingDocumentation

PowerSupply

Serial Smart Cable

Introduction UM018603-1005


3

– Development Kit User Manual– ZDS II - IDE User Manual– eZ8 CPU User Manual– Application notes

The sample code is installed with ZDS II and resides in the <installa-tion directory>\samples in the user's disk drive.

The documentation can be installed by the user with the DemoShield interface or can be viewed on the CD-ROM using the DemoShield menus and a PDF reader. A copy of the Acrobat installer is provided on the CD-ROM and can be installed from the DemoShield install screen. After installing the documentation on the user’s system Windows Explorer can be used to select any document to be viewed with your favorite PDF file viewer.

System/Software RequirementsIBM PC (or compatible computer) with the following minimum configu-rations:

Supported Host System Configuration• Win98 Second Edition, WinNT 4.0 Service Pack 6, Win2000 Service

Pack 3, WinXP Professional Service Pack 1

• PentiumII/233MHz processor or higher up to Pentium IV, 2.8 GHz

• 96 MB RAM or more

• 25 MB hard disk space or more

• Super VGA video adapter

• CD-ROM

• One or more RS-232 communication ports

UM018603-1005 Introduction


4

Introduction UM018603-1005


5

InstallationFollow the directions in the Quick Start Guide for software installation and setup of the Z8 Encore! XP® F08xA Series Development kit.

UM018603-1005 Installation


6

Installation UM018603-1005


7

F08xA Series Development BoardIntroduction

The Z8 Encore! XP® F08xA Series Development board is a development and prototyping board for the Z8 Encore! XP F08xA Series MCU. The board provides customers with a tool to evaluate features of Z8 Encore! XP F08xA Series MCU, and to start developing an application before building the hardware.

Figure 1. Z8 Encore! XP® F08xA Series Development Board

UM018603-1005 F08xA Series Development Board


8

Features• Z8 Encore!® MCU (28-pin SOIC)

• 3 LEDs

• RS-232 interface

• IrDA transceiver

• Two pushbuttons, RESET and TEST

• 5 VDC power connector

• On-Chip Debugger interface

• 20 MHz Ceramic Oscillator (Y1)

• Header for ADC input

• Prototyping area

• External interface connectors JP1 and JP2

• 2.7–3.6 V operating voltage with 5V-tolerant inputs

MCUThe Z8 Encore! XP F08xA Series MCU is member of a family of ZiLOG microcontroller products based upon the 8-bit eZ8 core CPU. The Flash in-circuit programming capability allows for faster development time and program changes in the field. The eZ8 core CPU is upward compatible with existing Z8® instructions. The rich peripheral set of the Z8 Encore! XP F08xA Series makes it suitable for a variety of applications including motor control, security systems, home appliances, personal electronic devices, and sensors.

The Development board contains circuitry to support and present all the features of the Z8 Encore! XP F08xA Series. The main features of the Z8 Encore! XP F08xA Series are:

F08xA Series Development Board UM018603-1005


9

• eZ8 core CPU

• 8KB Flash memory with in-circuit programming capability

• 1KB register RAM

• 8-channel, 10-bit analog-to-digital converter (ADC)

• Full-duplex UART

• Infrared Data Association (IrDA)-compliant infrared encoder/decoder

• Two 16-bit timers with capture, compare, and PWM capability

• Watch-Dog Timer (WDT) with internal RC oscillator

• Eleven (20-pin package) or nineteen (28-pin package) I/O pins

• Programmable priority interrupts

• On-Chip Debugger

• Voltage Brown-out Protection (VBO)

• Power-On Reset (POR)

• 2.7–3.6 V operating voltage with 5V-tolerant inputs

• Operating temperatures: 20° ±10° C

For further information on the Z8 Encore!® family of devices, consult the product specification, P/N PS0247, available for download from www.zilog.com.

UART with IrDA EndecThe Z8 Encore! XP F08xA Series (component U5) contains a fully-func-tional, high-performance UART with Infrared Encoder/Decoder (ENDEC). The Infrared Endec is integrated with an on-chip UART allow-ing easy communication between the Z8 Encore!® XP F08xA Series and IrDA transceivers. Infrared communication provides secure, reliable, low-

UM018603-1005 F08xA Series Development Board


10

cost, point-to-point communication between PCs, PDAs, cell phones, printers and other infrared enabled devices.

Power and Communication InterfacesTable 1 provides jumper information concerning the shunt status, func-tions, devices and defaults affected of jumpers JP3 and JP4.

External Interface Headers JP1 and JP2External interface headers JP1 and JP2 are shown in the schematic on page 13.

Table 1. Jumpers JP3 and JP4

Jumper StatusDevice Affected Status Default

JP3* OUT RS-232 interface

Enabled X

JP3 IN RS-232 interface

Disabled

JP4* OUT IrDA interface EnabledJP4 IN IrDA interface Disabled XJP5 OUT U5 RESET/

PD0PD0 (GPIO) X

JP5 IN U5 RESET/PD0

RESET when SW1 pressed

Note: * These jumpers must not be OUT at the same time

F08xA Series Development Board UM018603-1005

Z 8 E ncor e! XP ® F08xA Series Development KitUser Manual

11

SchematicThis section includes schematics for the Z8 Encore! XP® F08xA Series Development Board.

UM018603-0805 PRELIMINARY Schematic


12

Schematic PRELIMINARY UM018603-0805


13

A20

-CS0

A12

-IOREQ

-F91_WE

A13

GND

GND

A17

A21

VCC_33V

A14

D1

VCC_33V

D7

-DIS_FLASH

GNDA6 A0

D3

D6

-BUSACK

A3

D2

VCC_33V

A15

A4

-TRSTN

D0

-MREQ

A7

A10

A9

A16A18

A11

-INSTRD

A19

A5

GNDD5

-CS1A22

A1A2

-CS2

-RD

A8GND

D4

A23

-WR-BUSREQ

GND

B7

A3_CTS0

C7

VCC_33V

C4

A7_T1OUT PA2PA1_T0OUT_JPGND

GND

PC5

A4_RXD0 PA5_TXD0

GND

GNDB6

PA0_T0IN_JP

PC6

GNDCC_33V

-DIS_IrDA

B4_ANA7 PC2_ANA6PC0_ANA4PB2_ANA2PB0_ANA0

C1_ANA5B3_ANA3B1_ANA1

PB5_JPC3_COUT

PD0

A6_nT1OUT

RESETVCC_33V

-DIS_IRDA-DIS_232

ument Number Rev

Sheet of

96C0941-001 C

4K MDS Processor Module. Schematic.

1 2ednesday, July 21, 2004

ument Number Rev

Sheet of

96C0941-001 C



ument Number Rev

Sheet of

96C0941-001 C



connector 2

connector 1forreferenceonly

Module is plugged onto the Dev Platform the local 32 interface is disabled by pin 50 of JP2

24681012141618202224262830323436384042444648505254565860

13579

11131517192123252729313335373941434547495153555759

JP2

HEADER 30x2/SM

JP2

HEADER 30x2/SM

24681012141618202224262830323436384042444648505254565860

13579

11131517192123252729313335373941434547495153555759

JP1

HEADER 30x2/SM

JP1

HEADER 30x2/SM

UM018603-1005

Schematic, Z8 Encore! XP® F08xA Series MCU Development Board, Page 1 of 2

PB0_ANA0 PB2_ANA2

VCC_33V

PB3_ANA3

GND

PB1_ANA1

PB3_ANA3

PB0_ANA0

PB4_ANA7

PB2_ANA2

P

P

PP

P

P

P

PA6_nT1OUT

PA7_T1OUTV

GND

PB1_ANA1

PA2

VCC_33V

GND

PA5_TXD0

PB1_ANA1 PB0_ANA0

DBG

PA3_CTS0PA4_RXD0

PB2_ANA2PB3_ANA3

PA0_T0IN

PC3_COUT

PA7_T1OUT

PC3_COUTPC2_ANA6PC1_ANA5PC0_ANA4

PD0

PA6_nT1OUT

PC2_ANA6 PB4_ANA7

PC0_ANA4PC1_ANA5PC2_ANA6

PB6

PB7GND

PC5

PB2_ANA2

PA2

PC0_ANA4

PC2_ANA6

PA5_TXD0

PD0

PC3_COUT

PC1_ANA5

PA4_RXD0 PC4

VCC_33V

PC7

PA2

PA6_nT1OUT

PA1_T0OUT

PC6

PA3_CTS0

GND

PC1_ANA5

PA7_T1OUT

PB0_ANA0

GND

PA1_T0OUT

PB1_ANA1

PA0_T0IN

PB4_ANA7

PC0_ANA4

PB3_ANA3

DBG

PPPP

P

GND

VCC_33V

VCC_33V

P

-

PA0_T0IN_JP

PA1_T0OUT_JP

PB5

PB5_JP

GND

VCC_33V

DBG

PA3_CTS0PA4_RXD0PA5_TXD0

SENSE

Title

Size Doc

Date:

XP

B

W

Title

Size Doc

Date:

XP

B

W

Title

Size Doc

Date:

XP

B

W

If RS2

TEST

20 pin footprint28 pin footprint

RESET/TEST2

Note 1:PB6 and PB7 are dual function pins (GPIO or Analog supply)R12, R13, R16, and R17 are zero-ohm resistors used inconjunction with GPIO Control Registers to select functiondesired. C21, C22, and C23 are bypass capacitors that are usedfor better noise rejection. U8 is an optional filter that canbe used to improve the quality of the Analog Supply. The development board is shipped configured for Analog Supply.Table 1 shows the configurations recommended

NOTE 1:

NOTE 1:

NOTE 2

Note 2: The XP supports internal, external crystal, external ceramic resonator, external R/C and external CMOS driveclock modes. R14, R15, R18, C19, C20 and Y1 are used tosupport the clock mode selected. The development board isshipped configured for external 20MHz ceramic resonator orinternal clock operation. When using Internal oscilator,pins 7 and 8 could be used as GPIO ports PA0 and PA1. To doso install R20 and R21. Table 2 shows the recommended clock mode configurations.

Clock Mode R14 R15 R18 C19 C20 Y1

Internal Only none none none none none none

Crystal 0 Ohm 220 Ohm none Yes Yes Yes

Ceramic Res 0 Ohm 0 Ohm none none none Yes

External CMOS none none none none none none

TABLE 2

(Use PA0_T0INpin on JP2)

Supply

R12 R13 R16 R17 R22 U8 C21...C23

Analog IN OUT IN OUT OUT optional IN

GPIO OUT IN OUT IN IN OUT OUT

TABLE 1

R140R140

21D2

GREEN

D2

GREEN

C150.001uFC150.001uF

SW2SW2

R13

0

R13

0

SW1SW1

R11

100

R11

100

R8

100

R8

100

R22 0R22 0

C22

0.033uF

C22

0.033uF C21

0.033uF

C21

0.033uF

+C23

30uF

+C23

30uF

C20C20

R150R150

C10

0.001uF

C10

0.001uF

C160.001uFC160.001uF

R9

100K

R9

100K

R16 0R16 0

PB2/ANA22

PA4/RXD010PA3/CTS09PA2/DE8

PB3/CLKIN/ANA33

PA1/T0OUT/XOUT6PA0/T0IN/T0OUT/XIN/5

PB0/ANA0 20PB1/ANA11

PC1ANA5/CINN/LED 17

PC0/ANA4/CINP/LED 16

DBG 15

PA7/T1OUT 13

PA6/T1IN/T1OUT 12

PA5/TXD0 11

RESET/PD0 14GND7

VDD4

PC3/COUT/LED 19

PC2/ANA6/LED 18

U6

Z8F04xA

U6

Z8F04xA

21D3

YELL

D3

YELL

R10

10

R10

10

C120.001uFC120.001uF

11

22

3 3

Y1

20 MHz

Y1

20 MHz

IO1

GN

D2

IO 3

U8

EMI Filter

U8

EMI Filter

C110.001uFC110.001uF

246810121416

13579

111315

J2

HEADER 8X2

J2

HEADER 8X2

R17 0R17 0

12

JP5

HEADER 2

JP5

HEADER 2

R18

1M

R18

1M

C130.001uFC130.001uF

R20

0

R20

0

21D4

RED

D4

RED

C19C19

R19 10KR19 10K

C140.001uFC140.001uF

R12

0

R12

0

R21

0

R21

0

GND9

PC4/LED 16

PA6/T1IN/T1OUT 15PA5/TXD014PA4/RXD013PA3/CTS012

PB3/ANA3/CLKIN4

PA0/T0IN/T0OUTXIN7VDD6

PB1/ANA1 28

PB0/ANA0 27

PC1/ANA5/CINN/LED 24PC2/ANA6/LED 25PC3/COUT/LED 26

PC0/ANA4/CINP/LED 23

PB2/ANA21

PC6/LED 19PC7/LED 20

PA2/DE11

PB5/Vref3PB4/ANA72

PA7/T1OUT 18

PC5/LED 17

PB7(AGND)10

PA1/T0OUT/XOUT8

PB6(AVDD)5

RESET/PD0 21DBG 22

U5

Z8F04xA_28

U5

Z8F04xA_28

R7

100

R7

100

C170.001uFC170.001uF

C180.001uFC180.001uF


14

TXD0CTS0RXD0

PA4_RXD0

PA5_TXD0

IRDA_SD

GND

ment Number Rev

Sheet of

96C0941-001 C



ment Number Rev

Sheet of

96C0941-001 C



ment Number Rev

Sheet of

96C0941-001 C



CONSOLE

USER

R3

68

R3

68

C10.1uFC10.1uF

C9

330nF

C9

330nFR4

2R7

R4

2R7

C50.1uFC50.1uF

TXD2

SD4

RXD3

LEDA1

VCC5

GND6 T0

U4

ZHX1810

U4

ZHX1810

594837261

P1

DB9 Female

P1

DB9 Female

UM018603-1005

Schematic, Z8 Encore! XP® F08xA Series MCU Development Board, Page 2 of 2

GND

VCC_33VDBG

GND

PA3_CTS0

VCC_33V

GND

VCC_33V

PA5_TXD0

VCC_33V

PA4_RXD0

GND

VCC_33V

GND

-Z_RST

GND

5V

VCC_33V

VCC

GND

-Z_RST

PA3_CTS0

DBG

-DIS_IRDA

-DIS_232

PA5_TXD0

PA4_RXD0

VCC_33V

GND

SENSE

Title

Size Docu

Date:

XP

B

W

Title

Size Docu

Date:

XP

B

W

Title

Size Docu

Date:

XP

B

W

GND

DBGINTERFACE

DIS RS232

DIS IRDA

3.3 OK

C20.1uFC20.1uF

C40.1uFC40.1uF

11 10

147

U3E

74LVC04/SO

U3E

74LVC04/SO

1 2

147

U3A

74LVC04/SO

U3A

74LVC04/SO

OUT 1

SENSE2

GN

D3

SHDN4

VIN5

U7

LT1129-3.3/DD

U7

LT1129-3.3/DD

C60.1uF

C60.1uF

12

JP3JP3

9 8

147

U3D

74LVC04/SO

U3D

74LVC04/SO

1 23 45 6

P2

Header 3x2

P2

Header 3x2

R210KR210K

3 4

147

U3B

74LVC04/SO

U3B

74LVC04/SO

R2310KR2310K

13 12

147

U3F

74LVC04/SO

U3F

74LVC04/SO

12

JP4JP4

R1

680

R1

680

F1

RXE050

F1

RXE050

R2415KR2415K

231

J1

PWR JACK

J1

PWR JACK

+C7

100/10

+C7

100/10C8

0.1uF

C8

0.1uF

R510KR510K

+ C3

100/10

+ C3

100/10

5 6

147

U3C

74LVC04/SO

U3C

74LVC04/SO

EN1

C1+2

C1-4

C2+5

C2-6

T1IN13

T2IN12

R1OUT15

R2OUT10

V+ 3

V- 7

T1OUT 17

T2OUT 8

R1IN 16

R2IN 9

SHDN20

VC

C19

GN

D18

NC 11NC 14

U1

MAX3222

U1

MAX3222

1 2 3 4 5

TP1TP1

R610KR610K

21

D1

LED

D1

LED

1 2 3 4 5

TP2TP2

z8 encore! xp 8k series development kit - digi-key sheets/zilog pdfs... · · 2006-11-15•...

Documents