MACHINES SALE Weldg

ina

WHILE STOCKS LAST

Terms and Conditions of the sale relate to existing stocks only. No back orders will be entered. Weldgina special terms and conditions apply.

ALL BELOW COSTComparC Geminis Diesel enGine Driven Stick (SMAW), TIG (GTAW), MIG/MAG (GMAW), Flux Cored (Fcaw), Gouging (CAC-A)

• Dual Operators• Output range: 30 - 600 amps• O.C.V: 95 volts DC• Duty cycle: 550 amps / 30 volts @ 40%• Output process: CC/CV

$17,160 + gst304-540

304-541 ComparC insiGnia 603Diesel enGine Driven Stick (SMAW), TIG (GTAW), Flux Cored (Fcaw), Gouging (CAC-A)

• Output range: 45 - 600 amps• O.C.V: 95 volts DC• Duty cycle: 500 amps / 40 volts @ 100%

600 amps / 30 volts @ 60%

$15,840 + gst

304-539 ComparC insiGnia 403Diesel enGine Driven Stick (SMAW), TIG (GTAW), MIG/MAG (GMAW)

• Output range (CC): 50 - 400 amps• O.C.V. (CC): 70 volts• Output range (CV): 14 - 30 amps• O.C.V. (CV): 41 volts• Duty cycle: 300 amps @ 100% (CC & CV)

$11,880 + gst

782495

302-372 ComparC opus 560multiproCess• Inverter arc control technology.• Inductance electric control.• Automatic voltage adjustment to set input voltages variations.• Automatic fan operates only when required.• Digital voltmeter and ammeter.• Welding process selector.• 120 VAC duplex receptable.

$5,544 + gst

MACHINES SALE WHILE STOCKS LAST

Terms and Conditions of the sale relate to existing stocks only. No back orders will be entered. Weldgina special terms and conditions apply.

proFaX 5 ton pipe & tanKturninG roll • 5 Ton capacity (1 Drive / 1 Idler Max. 2½ Ton each).• 7½ Ton rotating capacity with additional idlers.• 12” to 68” (300 mm to 1.7 m) diameter capacity.• 0 - 96 IPM rotation speed.• 4” x 12” (101 x 304 mm) wheels / polyurethane over steel.• 2/3 H.P. motor.

$8,052 + gstTR10000-2

TR20000-2 proFaX 10 ton pipe & tanKturninG roll• 10 Ton capacity (1 Drive / Idler max 5 ton each).• 15 Ton rotating capacity with additional Idlers.• 20” to 13’ (500 mm to 4.2 m) diameter capacity.• 0 - 76 IPM rotation speed.• 5” x 13½ (127 to 317 mm) Wheels / Polyurethane over steel.• 1 H.P. Motor.

$10,956 + gst

JS400DCP

JasiC arC inverter WelDer• Advanced IGBT inverter technology.• MMA (stick electrode) DC +/DC- function.• DC TIG with lift arc ignition & gas solenoid valve.• Electrode hot start & adjustable arc force.• Adjustable down slope.• 2T/4T trigger function.

$990 + gst

SMDBM50

steelmaX portaBle DouBle siDeD BevellinG maCHineSteelmax DBM50 produces accurate high-quality machined bevels with rotary milling head and replaceable carbide inserts on plate thickness from 6 - 68 mm. Infinitely adjustable bevel angle settings from 15˚ to 60˚ require no tooling change.No crane necessary to rotate the material.

$24,816 + gst

JS315AC/DCP JasiC aC/DC tiG WelDer• Rugged metal case construction.• HF start AC/DC tig function.• 2T/4T trigger junction.• Adjustable AC balance control.• Adjustable pulse control.• Adjustable pre gas - post gas.• Adjustable down slope.• Includes machine, lead kit, and tig torch.

$1,333 + gst

BELOW COST

MACHINES SALE WHILE STOCKS LAST

Terms and Conditions of the sale relate to existing stocks only. No back orders will be entered. Weldgina special terms and conditions apply.

saF prestoJet 4• Three phase input power: 400 V 50/60 Hz• Maximum input current: 40, 3 A• Cutting current: 10 - 120 amp• Duty cycle (at 40˚C) at 60%: 120 amp

at 100%: 100 amp• Compressed air: 5 bars - 200 l/mm• Protection index: IP 23 S

$5,013 + gst

W000262498

W000263677

saF 140G Fro Bare• Single phase input power: 230V (± 20%)• Frequency: 50/60 Hz• No-load voltage: 85V• Welding current: 5 to 140 amp

at 35%: 140 amp• Duty cycle (at 40˚C) at 60%: 120 amp

at 100%: 100 amp• Protection index: IP 23

$509 + gst

W000263680

saF presto 220GC• Three phase input power: 400V (± 15%)• Frequency: 50/60 Hz• No load voltage: 105 V• Welding current: 5 to 220 amp• Duty cycle (at 40˚C) at 40%: 220 amp

at 60%: 190 ampat 100%: 150 amp

• Protection index: IP 23

$1,077 + gst

W000263764

saF FilCorD 251C• Duty cycle: 250 amp at 30%• Single phase.• 4 Roller plate.• Polarity reversal.• 2T/4T

$1,317 + gst

W000263708

saF saXoJet• Single phase input: 230 V - 50 - 60 Hz• Max. input: 16 amp• Cutting current: 10 - 20 amp• Duty cycle at 40˚C: 20 amp at 50%• Protection index: IP 23

$1,317 + gst

ALL BELOW COST

MACHINES SALE WHILE STOCKS LAST

Terms and Conditions of the sale relate to existing stocks only. No back orders will be entered. Weldgina special terms and conditions apply.

saF FilCorD 353s• Duty cycle: 350 amp at 35%• 3 Phase power source only.• Running gear and cylinder holder.• 3 m supply cable.• 3 m earth cable.

$1,419 + gst

W000263770

91601420P saF optipuls 380i• Adjustment range: 10 - 500 amps• Duty cycle 60% @ 40˚C: 450 amps

100% @ 60˚C: 400 amps• Steel/SS wire: 0.8 - 1.6 mm• Aluminium wire: 1.0 - 1.6 mm• Flux-cored wire: 1.0 - 2.4 mm• Welding cycle: 2S-4S

$6872 + gst

91601419P saF optipuls 350i• Adjustment range: 10 - 350 amps• Duty cycle 60% @ 40˚C: 350 amps

100% @ 60˚C: 300 amps• Steel/SS wire: 0.8 - 1.6 mm• Aluminium wire: 1.0 - 1.6 mm• Flux-cored wire: 1.0 - 2.4 mm• Welding cycle: 2S-4S

$7,046 + gst

saF presto 170vrD• VRD - Voltage Reduction Device to reduce risk,providing a no load voltage of 14V in milliseconds.

• The protection of electronic boards are designed tobe used with generators.

• TIG welding with TIG lift smooth starting system,control of slope up & down for smooth arcextinguishing and crater filling.

$863 + gst

W000261826

saF plasmaJet 2• Quality cut 25 mm, severance cut 30 mm.• Powerful: 80 amps with 40% at 40˚C duty cycle.• 3 steps to simplify the selection of the right currentaccording to the thickness to be cut.

• Drag cutting up to 8 mm for maximum quality.• IP 23 for use on outdoor sites.

$2,245 + gst

W000263849

ALL BELOW COST

MACHINES SALE WHILE STOCKS LAST

Terms and Conditions of the sale relate to existing stocks only. No back orders will be entered. Weldgina special terms and conditions apply.

saF prestoJet 2• Input voltage three phases: 230V - 400V +/- 10%• Max. input current at 400V: 15.5 amps• Max. input current at 230V: 14 amps• Cutting current: 20 - 65 amps• Duty cycle at 40˚C 400V: 65 amps at 60%

50 amps at 100%• Duty cycle at 40˚C 230V: 40 amps at 100%• Compressed air: 5 bars - 180 I/min

$2688 + gst

W000272670

W000275263 saF DiGi pulse ii 320• Process available:MMA, short arc, speed short arc, pulse, spray modal.

• Three-phase primary voltage: (+15% - 20%) 400V• Frequency: 50/60 Hz• Current consumption: 21 amps• No load voltage: 86V• Duty cycle 60% @ 40˚C: 320 amps

100% @ 40˚C: 270 amps

$7,986 + gst

W000274838 saF DiGi pulse ii 420• Process available:MMA, short arc, speed short arc, pulse, spray modal.

• Three-phase primary voltage:(+15% - 20%) 400V• Frequency: 50/60 Hz• Current consumption: 31 amps• No load voltage: 86V• Duty cycle 60% @ 40˚C: 420 amps

100% @ 40˚C: 350 amps

$7986 + gst

785450

ALL BELOW COST

785450

pFast• Fit-up 1” (2.5 cm) to 8” (20.3 cm) flanges, fittings, reducers,caps and pup joints.

• Capable of 300 lb (136 kg) pressure-rated fittings.• Handles 600 lbs (270 kg).

$20,988 + gst

20% OFF