standard comparison

1 AASHTO

Standard specification for transportation materials and

methods of sampling and testing (1 of 2)

Standard specification for transportation materials

and methods of sampling and testing (1 of 2)

2 AASHTO

Standard specification for transportation materials and

methods of sampling and testing (2 of 2)

Standard specification for transportation materials

and methods of sampling and testing (2 of 2)

3 ACI ACI ACI 234R Guide for the use of silica fume in concrete ACI 234R Guide for the use of silica fume in concrete

4 ACI ACI ACI 301 Standard Specification for Structural Concrete ACI 301 Standard Specification for Structural Concrete

5 ACI ACI ACI 304R

Guide for Measuring , Mixing Transporting , and Placing

Concrete ACI 304R

Guide for Measuring , Mixing Transporting , and

Placing Concrete

6 ACI ACI ACI 305R Hot weather concreting ACI 305R Hot weather concreting

7 ACI ACI ACI 318R

Building code requirements for structural concrete and

commentary ACI 318R

Building code requirements for structural concrete

and commentary

8 ACI ACI ACI 336.1 Standard specification for construction of Drilled Piers ACI 336.1

Standard specification for construction of Drilled

Piers

9 ACI ACI ACI 336.3R Design and construction of drilled piers ACI 336.3R Design and construction of drilled piers

10 ACI ACI ACI 347R Guide to Formwork for concrete ACI 347R Guide to Formwork for concrete

11 ACI ACI ACI 504 R Guide to Sealing Joints in concrete structures ACI 504 R Guide to Sealing Joints in concrete structures

12 ACI ACI SP - 66

Detailing Manual - (Concrete Reinforcement , Placing drawing

for Reinforced concrete) SP - 66

Detailing Manual - (Concrete Reinforcement ,

Placing drawing for Reinforced concrete)

13 AI ASQC Mix Design Methods for Asphalt Concrete & Other Hot MixesMS-2

Mix Design Methods for Asphalt Concrete & Other

Hot Mixes

14 ANNEX 14 ANNEX 14 Abbreviations and Symbols - Volume 1 Abbreviations and Symbols - Volume 1

15 ANSI ASQC Q9001

Quality Systems - Model for quality assurance in design,

development, production, installation & servicing ASQC Q9001

Quality Systems - Model for quality assurance in

design, development, production, installation &

servicing

16 ANSI ASQC Q92


production,installation & servicing ASQC Q92


production,installation & servicing

17 ANSI B1.20.1 Pipe Threads, General Purpose (Inch) B1.20.1 Pipe Threads, General Purpose (Inch)

18 ANSI C105/A21.5 Polythylene encasement for ductile iron pipe systems C105/A21.5

Polythylene encasement for ductile iron pipe

systems

19 ANSI C110/A21.10 Ductile Iron and Gray - Iron fittings for Water and other liquids C110/A21.10

Ductile Iron and Gray - Iron fittings for Water and

other liquids

20 API API - 5L Specification for Line Pipe API - 5L Specification for Line Pipe

21 API API -1542 Airport Equipment Marking for Fuel Identification API -1542 Airport Equipment Marking for Fuel Identification

22 AS/NZS 4455 Masonry units and segmental pavers 4455 Masonry units and segmental pavers

23 AS/NZS 4456 Masonry units and segmental pavers- Methods of Test 4456

Masonry units and segmental pavers- Methods of

Test

24 ASME A112.21.1M Floor Drains A112.21.1M Floor Drains

25 ASME A112.36.2M Cleanouts A112.36.2M Cleanouts

26 ASME A13.1 Scheme for the identification of piping systems A13.1 Scheme for the identification of piping systems

27 ASME B16.4 Gray Iron Threaded Fittings B16.4 Gray Iron Threaded Fittings

28 ASME B31.1 Power Piping - Pressure Piping B31.1 Power Piping - Pressure Piping

29 ASME B31.1 Cases No. 21 B31.1 Cases No. 21

30 ASME B31.1a Code for Pressure Piping , B31 - Power Piping B31.1a Code for Pressure Piping , B31 - Power Piping

31 ASME B31.9 Code for Pressure Piping , B31 B31.9 Code for Pressure Piping , B31

32 ASME B31.9 Building Services Piping B31.9 Building Services Piping

33 ASME B31.9a Building Services Piping - Pressure Piping , B31 B31.9a Building Services Piping - Pressure Piping , B31

34 ASME Section IX Interpretations -Volume 36 Section IX Interpretations -Volume 36

35 ASME Section IX Interpretations -Volume 38 Section IX Interpretations -Volume 38

36 ASME Section IX Boiler & Pressure Vessel Code Section IX Boiler & Pressure Vessel Code

37 ASME Section IX Boiler and pressure vessel code Section IX Boiler and pressure vessel code

38 ASTM A 106 - 95

Standard specification for seamless carbon steel pipe for high

- temperature service A 36/A 36M -96 Standard specification for carbon structure steel

39 ASTM A 185-94

Standard specification for steel welded wire fabric , plain for

concrete reinforcement A 47 - 90

Standard specification for Ferritic Malleable iron

castings

40 ASTM A 193/A 193M -96a

Standard specification for alloy-steel and stainless steel

bolting materials for high-temp. service A 48 - 94a Standard specification for gray iron castings

41 ASTM A 194/A 194M - 96

Standard specification for carbon and alloy steel nuts for bolts

for high - pressure and high temp. service A 53 - 97

Standard specification for pipe, steel, black and hot

dipped ,zinc coated, welded and seamless

42 ASTM A 328 / A328M-93a Standard specification for steel sheet piling A 82

Standard specification for steel wire , plain for

concrete reinforcement

43 ASTM A 36/A 36M -96 Standard specification for carbon structure steel A 106 - 95

Standard specification for seamless carbon steel

pipe for high - temperature service

44 ASTM A 377 - 95 Standard Index specification for ductile Iron pressure pipe A 123

Standard Specification for Zinc (hot dip galvanized)

coatings on Iron and Steel Products

45 ASTM A 47 - 90 Standard specification for Ferritic Malleable iron castings A183

Standard Specification for Carbon Steel Track

Bolts and Nuts

46 ASTM A 48 - 94a Standard specification for gray iron castings A 185-94

Standard specification for steel welded wire fabric ,

plain for concrete reinforcement

47 ASTM A 497 - 95

Standard specification for steel welded wire fabric , deformed,

for concrete, reinforcement A 193/A 193M -96a

Standard specification for alloy-steel and stainless

steel bolting materials for high-temp. service

48 ASTM A 53 - 97

Standard specification for pipe, steel, black and hot dipped

,zinc coated, welded and seamless A 194/A 194M - 96

Standard specification for carbon and alloy steel

nuts for bolts for high - pressure and high temp.

service

49 ASTM A 536 - 84 Standard specification for Ductile Iron Castings A 328 / A328M-93a Standard specification for steel sheet piling

50 ASTM A 551- 94 Standard Specification for Steel Tires A 377 - 95

Standard Index specification for ductile Iron

pressure pipe

51 ASTM A 564/ A564M

Standard specification for hot rolled & cold finished age

hardening stainless steel bars & shapes A 497 - 95

Standard specification for steel welded wire fabric ,

deformed, for concrete, reinforcement

52 ASTM A 615/A 615M - 96a

Standard specification for deformed and plain billet - steel

bars for concrete reinforcement A 536 - 84 Standard specification for Ductile Iron Castings

53 ASTM A 733 - 93

Standard specification for welded and seamless carbon steel

and sustenitic stainless steel pipe nipples A 551- 94 Standard Specification for Steel Tires

54 ASTM A 775 / A 775M- 95a

Standard specification for Epoxy - coated reinforcing steel

bars A 564/ A564M

Standard specification for hot rolled & cold finished

age hardening stainless steel bars & shapes

55 ASTM A 82 - 95a

Standard specification for steel wire , plain for concrete

reinforcement A 615/A 615M - 96a

Standard specification for deformed and plain billet -

steel bars for concrete reinforcement

56 ASTM A183 A 733 - 93

Standard specification for welded and seamless

carbon steel and sustenitic stainless steel pipe

nipples

57 ASTM B 3 - 95 Standards specification for soft or annealed copper wire A 775 / A 775M- 95a

Standard specification for Epoxy - coated

reinforcing steel bars

58 ASTM B 33 - 94

Standard specification for tinned soft or annealed copper wire

for electrical purposes B 3 - 95

Standards specification for soft or annealed copper

wire

59 ASTM B 8 - 95

Standard specification for Concentric -Lay -Stranded Copper

Conductors, Hard, Medium-hard, soft B 33 - 94

Standard specification for tinned soft or annealed

copper wire for electrical purposes

60 ASTM C 1037 -85

Standard specification for inspections of underground precast

concrete utility structures B 8 - 95

Standard specification for Concentric -Lay -

Stranded Copper Conductors, Hard, Medium-hard,

soft

61 ASTM C 1064 - 86

Standard test method for temperature of freshly mixed

portland cement concrete C29 Standard Test Methods for Bulk Density and Voids in Aggregate

62 ASTM C 1105 - 95

Standard test method for length change of concrete due to

alkali - Carbonate rock reaction C 31 /C 31M

Standard practice for making and curing concrete

test specimens in the field

63 ASTM C 114 - 94

Standard test method for chemical analysis of hydraulic

cement C 33 Standard specification for concrete aggregates

64 ASTM C 117 - 95

Standard test method for materials - Sieve in Mineral

Aggregates by washing C 39

Standard test method for compressive strength of

cylindrical concrete specimens

65 ASTM C 127 - 88

Standard test method for specific gravity and absorption of

Coarse aggregate C 40

Standard practice for organic impurities in fine

aggregate for concrete

66 ASTM C 128 - 93

Standard test method for specific gravity and absorption of

fine aggregate C 42

Standard test method for obtaining and testing

drilled cores and sawed beams of concrete

67 ASTM C 131 - 96

Standard test method for resistance to degradation of small

size coarse aggregate by abrasion C 76 - 95a

Standard specification for reinforced concrete

culvert, storm drain , and sewer pipe

68 ASTM C 136 - 96

Standard test method for sieve analysis of fine and coarse

aggregates C 88

Standard test method for soundness of aggregates

by use of sodium sulfate or magnesium sulfate

69 ASTM C 142 - 78

Standard test method for clay lumps and friable particles in

aggregates C 94 Standard specification for ready - mixed concrete

70 ASTM C 143 - 90a Standard test method for slump of hydraulic cement concrete C 97

Standard Test Methods for Absorption and Bulk

Specific Gravity of Dimension Stone

71 ASTM C 144 - 93 Standard specification for aggregate for masonry mortar C 99

Standard Test Method for Modulus of Rupture of

Dimension Stone

72 ASTM C 150 - 96 Standard specification for portland cement C 110

Standard Test Methods for Physical Testing of

Quicklime, Hydrated Lime, and Limestone

73 ASTM C 171 - 95 Standard specification for sheet materials for curing concrete C 114 - 94

Standard test method for chemical analysis of

hydraulic cement

74 ASTM C 172 - 90 Standard practice for sampling freshly mixed concrete C 117 - 95

Standard test method for materials - Sieve in

Mineral Aggregates by washing

75 ASTM C 186 - 96

standard test method for heat of hydration of hydraulic

cement C 123

Standard Test Method for Lightweight Pieces in

Aggregate

76 ASTM C 191 - 62

Standard test method for time of setting of hydraulic cement

by vicat needle C 127 - 88

Standard test method for specific gravity and

absorption of Coarse aggregate

77 ASTM C 192 / C 192M -95

Standard practice for making and curing concrete test

specimens in the laboratory C 128 - 93

Standard test method for specific gravity and

absorption of fine aggregate

78 ASTM C 227 - 90

Standard test method for potential Alkali Reactivity of cement -

Aggregate combinations C 131 - 96

Standard test method for resistance to degradation

of small size coarse aggregate by abrasion

79 ASTM C 270 - 96a Standard specification for mortar for unit masonry C 136 - 96

Standard test method for sieve analysis of fine and

coarse aggregates

80 ASTM C 289 - 94

Standard test method for potential alkali Reactivity

Aggregates (chemical method) C 142 - 78

Standard test method for clay lumps and friable

particles in aggregates

81 ASTM C 295 - 90

Standard guide for petrographic examination of aggregates

for concrete C 143 - 90a

Standard test method for slump of hydraulic

cement concrete

82 ASTM C 309 - 95

Standard specification for liquid membrane -forming

compound for curing concrete C 144 - 93

Standard specification for aggregate for masonry

mortar

83 ASTM C 31 /C 31M - 96

Standard practice for making and curing concrete test

specimens in the field C 150 - 96 Standard specification for portland cement

84 ASTM C 31/ C31M - 95

Standard Practice for making and curing concrete test

specimens in the field C 157

Standard Test Method for Length Change of

Hardened Hydraulic-Cement, Mortar, and Concrete

85 ASTM C 311 - 96b

Standard test methods for sampling and testing fly ash natural

pozzolans for use as a mineral admixture C 171 - 95

Standard specification for sheet materials for

curing concrete

86 ASTM C 33 - 93 Standard specification for concrete aggregates C 172 - 90

Standard practice for sampling freshly mixed

concrete

87 ASTM C 387 - 95

Standard specification for packaged , dry , combined

materials for mortar and concrete C 186 - 96

standard test method for heat of hydration of

hydraulic cement

88 ASTM C 39 - 94

Standard test method for compressive strength of cylindrical

concrete specimens C 191 - 62

Standard test method for time of setting of

hydraulic cement by vicat needle

89 ASTM C 39 -96

Standard test method for compressive strength of cylindrical

concrete specimens C 192 / C 192M -95

Standard practice for making and curing concrete

test specimens in the laboratory

90 ASTM C 40 - 92

Standard practice for organic impurities in fine aggregate for

concrete C 227 - 90

Standard test method for potential Alkali Reactivity

of cement - Aggregate combinations

91 ASTM C 42 - 94

Standard test method for obtaining and testing drilled cores

and sawed beams of concrete C 232 Standard Test Methods for Bleeding of Concrete

92 ASTM C 494 - 92 Standard specification for chemical admixtures for concrete C 241

Standard Test Method for Abrasion Resistance of

Stone Subjected to Foot Traffic

93 ASTM C 586 - 92

Standard test method for potential Alkali Reactivity of

carbonate rocks for concrete aggregates C 270 - 96a Standard specification for mortar for unit masonry

94 ASTM C 618 - 96a

Standard specification for Coal fly Ash and Raw or Calcined

Natural Pozzolan for use as a mineral Admixture in concrete C 289 - 94

Standard test method for potential alkali Reactivity

Aggregates (chemical method)

95 ASTM C 76 - 95a

Standard specification for reinforced concrete culvert, storm

drain , and sewer pipe C 295 - 90

Standard guide for petrographic examination of

aggregates for concrete

96 ASTM C 857 - 95

Standard practice for minimum structural design loading for

underground precast concrete utility structures C 309 - 95

Standard specification for liquid membrane -

forming compound for curing concrete

97 ASTM C 858 - 83

Standard specification for underground precast concrete

utility structures C 311 - 96b

Standard test methods for sampling and testing fly

ash natural pozzolans for use as a mineral

admixture

98 ASTM C 88 - 90

Standard test method for soundness of aggregates by use of

sodium sulfate or magnesium sulfate C 387 - 95

Standard specification for packaged , dry ,

combined materials for mortar and concrete

99 ASTM C 881 -90

Standard specification for Epoxy - Resin - Base Bonding

systems for concrete C 494 - 92

Standard specification for chemical admixtures for

concrete

100 ASTM C 891 - 90

Standard practice for installation of underground precast

concrete utility structures C 535

Standard Test Method for Resistance to

Degradation of Large-Size Coarse Aggregate by

Abrasion and Impact in the Los Angeles Machine

101 ASTM C 920 - 95 Standard specification for Elastomeric joint Sealants C 586 - 92

Standard test method for potential Alkali Reactivity

of carbonate rocks for concrete aggregates

102 ASTM C 94 - 96 Standard specification for ready - mixed concrete C 618 - 96a

Standard specification for Coal fly Ash and Raw or

Calcined Natural Pozzolan for use as a mineral

Admixture in concrete

103 ASTM D 1556 -90

Standard test method for density and unit weight of soil in

place by the sand -cone method(reapprov.) C 857 - 95

Standard practice for minimum structural design

loading for underground precast concrete utility

structures

104 ASTM D 1556 -90

Standard test method of density and unit weight of soil in

place by the sand-cone method C 858 - 83

Standard specification for underground precast

concrete utility structures

105 ASTM D 1557 - 91

Test method for laboratory compaction characteristics of soil

using modified effort C 881 -90

Standard specification for Epoxy - Resin - Base

Bonding systems for concrete

106 ASTM D 1559 -89

Standard test method for resistance to plastic flow of

bituminous mixtures using marshall apparatus C 891 - 90

Standard practice for installation of underground

precast concrete utility structures

107 ASTM D 1599 - 88

Standard test method for short - time hydraulic failure

pressure of plastic pipe , tubing and fittings C 920 - 95

Standard specification for Elastomeric joint

Sealants

108 ASTM D 1652 - 90 Standard test methods for epoxy content of epoxy resins C 936

Standard Specification for Solid Concrete

Interlocking Paving Units

109 ASTM D 1751 - 83

Standard specification for preformed expansion joint filler for

concrete paving and structural constr. C 1037 -85

Standard specification for inspections of

underground precast concrete utility structures

110 ASTM D 1883 - 94 Standard test method for CBR of laboratory - compacted soils C 1064 - 86

Standard test method for temperature of freshly

mixed portland cement concrete

111 ASTM D 1896 - 93

Standard practice for transfer molding test specimens of

thermosetting compounds C 1105 - 95

Standard test method for length change of

concrete due to alkali - Carbonate rock reaction

112 ASTM D 209 - 81 Standard specification for lampblack pigment C 1107

Standard Specification for Packaged Dry, Hydraulic-

Cement Grout (Nonshrink)

113 ASTM D 2167 - 94

Standard test method for density and unit weight of soil in

place by the rubber balloon method D 4 Standard Test Method for Bitumen Content

114 ASTM D 2216 - 92

Standard test method for laboratory determination of water

(moisture ) content of soil and rock D 5

Standard Test Method for Penetration of

Bituminous Materials

115 ASTM D 2276 - 96

Standard test method for particulate contaminant in aviation

fuel by line sampling D 36

Standard Test Method for Softening Point of

Bitumen (Ring-and-Ball Apparatus)

116 ASTM D 2321 - 89

Standard practice for underground installation of

thermoplastic pipe for sewers and other gravity flow

applications D 75 - 87 Standard practice for sampling aggregates

117 ASTM D 2343 - 95

Standard test method for tensile properties of glass fiber

strands , yarns, and rovings used in reinforced plastics D 92

Standard Test Method for Flash and Fire Points by

Cleveland Open Cup

118 ASTM D 2412 -96

Standard test method for determining of external loading

characteristics of plastic pipe by parallel - plate loading D 113

Standard Test Method for Ductility of Bituminous

Materials

119 ASTM D 2489 -84

Standard test method for degree of partice coating of

bituminous aggregate mixtures D 365

Standard test method for soluble nitrocellulose

base solutions

120 ASTM D 2563 - 94

Standard practice for classifying visual defects in glass -

reinforced plastic laminate parts D 402

Standard Test Method for Distillation of Cut-Back

Asphaltic (Bituminous) Products

121 ASTM D 2697 - 86

Standard test method for volume nonvolatile matter in clear or

pigmented coatings D 422 - 63

Standard test method for particle - size analysis of

soils

122 ASTM D 2726

Standard test method for bulk specific gravity and density of

non - absorptive compacted biuminous mixtures D 449

Standard Specification for Asphalt Used in

Dampproofing and Waterproofing

123 ASTM D 2924

Standard test method for external pressure resistance of

Fiberglass pipe D 512 - 89 Standard test method for chloride Ion in water

124 ASTM D 2992

Standard practice for obtaining hydrostatic or pressure design

basis for fiberglass pipe and fittings D 516 - 90 Standard test method for sulfate Ion in water

125 ASTM D 2996 Standard specification for filament - wound fiberglass pipe D 979

Standard Practice for Sampling Bituminous Paving

Mixtures

126 ASTM D 3240

Standard test method for undissolved water in aviation turbine

fuels D 995

Standard Specification for Mixing Plants for Hot-

Mixed, Hot-Laid Bituminous Paving Mixtures

127 ASTM D 3282

Standard Classificaion of soils and soil-aggregate mixtures for

highway construction D 1556 -90

Standard test method for density and unit weight of

soil in place by the sand -cone method(reapprov.)

128 ASTM D 3517 Standard specifications for Fiberglass pressure pipe D 1556 -90

Standard test method of density and unit weight of

soil in place by the sand-cone method

129 ASTM D 3567

Standard practice for determining dimensions of Fiberglass

pipe and fittings D 1557 - 91

Test method for laboratory compaction

characteristics of soil using modified effort

130 ASTM D 3569

Standard specification for joint sealant , hot-applied ,

elastomeric jet-fuel-resistant-tyre for portland cement

concrete pavements D 1559 -89

Standard test method for resistance to plastic flow

of bituminous mixtures using marshall apparatus

131 ASTM D 3639

Standard test method for classification of asbestos by quebec

standard test D 1599 - 88

Standard test method for short - time hydraulic

failure pressure of plastic pipe , tubing and fittings

132 ASTM D 365 Standard test method for soluble nitrocellulose base solutions D 1652 - 90

Standard test methods for epoxy content of epoxy

resins

133 ASTM D 3839 - 94a

Standard practice for underground installation of Fiberglass

pipe D 1751

Standard Specification for Preformed Expansion

Joint Filler for Concrete Paving and Structural

Construction (Nonextruding and Resilient

Bituminous Types)

134 ASTM D 422 - 63 Standard test method for particle - size analysis of soils D 1751 - 83

Standard specification for preformed expansion

joint filler for concrete paving and structural constr.

135 ASTM D 4318 - 95a

Standard test Method for Liquid Limit Plastic Limit and

Plasticity Index of Soils D 1754

Standard Test Method for Effect of Heat and Air on

Asphaltic Materials (Thin-Film Oven Test)

136 ASTM D 512 - 89 Standard test method for chloride Ion in water D 1883 - 94

Standard test method for CBR of laboratory -

compacted soils

137 ASTM D 516 - 90 Standard test method for sulfate Ion in water D 1896 - 93

Standard practice for transfer molding test

specimens of thermosetting compounds

138 ASTM D 75 - 87 Standard practice for sampling aggregates D 2042

Standard Test Method for Solubility of Asphalt

Materials in Trichloroethylene

139 ASTM E 1155 - 87

Standard test method for determining floor flatness and

levelness using the F-Number D 209 - 81 Standard specification for lampblack pigment140 ASTM E 154 -83 Standard test method for water vapor retarders used in D 2167 - 94 Standard test method for density and unit weight of

141 ASTM F 436 - 93 Standard specification for hardened steel washers D 2170

Standard Test Method for Kinematic Viscosity of

Asphalts (Bitumens)

142 ASTM F 512 - 95

Standard practice for smooth -wall poly (Vinyl chloride) (PVC)

conduit and fittings for underground installation D 2216 - 92

Standard test method for laboratory determination

of water (moisture ) content of soil and rock

143 ASTMVOL. 4.02

Construction: Concrete & Aggregates D 2276 - 96

Standard test method for particulate contaminant in

aviation fuel by line sampling

144 ASTM

VOL. 4.03 Construction: Road & Paving Materials: Vehicle-Pavement

Systems D 2321 - 89


thermoplastic pipe for sewers and other gravity flow

applications

145 ASTM

VOL. 4.04Construction: Roofing, Waterproofing & Bituminous Material D 2343 - 95

Standard test method for tensile properties of glass

fiber strands , yarns, and rovings used in

reinforced plastics

146 ASTM C 97

Standard Test Methods for Absorption and Bulk Specific

Gravity of Dimension Stone D 2412 -96

Standard test method for determining of external

loading characteristics of plastic pipe by parallel -

plate loading

147 ASTM C 99

Standard Test Method for Modulus of Rupture of Dimension

Stone D 2419

Standard Test Method for Sand Equivalent Value

of Soils and Fine Aggregate

148 ASTM C 110

Standard Test Methods for Physical Testing of Quicklime,

Hydrated Lime, and Limestone D 2489 -84

Standard test method for degree of partice coating

of bituminous aggregate mixtures

149 ASTM C 123 Standard Test Method for Lightweight Pieces in Aggregate D 2563 - 94

Standard practice for classifying visual defects in

glass - reinforced plastic laminate parts

150 ASTM C 157

Standard Test Method for Length Change of Hardened

Hydraulic-Cement, Mortar, and Concrete D 2697 - 86

Standard test method for volume nonvolatile matter

in clear or pigmented coatings

151 ASTM C 232 Standard Test Methods for Bleeding of Concrete D 2726

Standard test method for bulk specific gravity and

density of non - absorptive compacted biuminous

mixtures

152 ASTM C 241

Standard Test Method for Abrasion Resistance of Stone

Subjected to Foot Traffic D 2924

Standard test method for external pressure

resistance of Fiberglass pipe

153 ASTM C 535

Standard Test Method for Resistance to Degradation of Large-

Size Coarse Aggregate by Abrasion and Impact in the Los

Angeles Machine D 2992

Standard practice for obtaining hydrostatic or

pressure design basis for fiberglass pipe and

fittings

154 ASTM C 936

Standard Specification for Solid Concrete Interlocking Paving

Units D 2996

Standard specification for filament - wound

fiberglass pipe

155 ASTM C 1107

Standard Specification for Packaged Dry, Hydraulic-Cement

Grout (Nonshrink) D 3240

Standard test method for undissolved water in

aviation turbine fuels

156 ASTM D 4 Standard Test Method for Bitumen Content D 3262

Standard Specification for "Fibreglass"(Glass-Fibre-

Reinforced Thermosetting-Resin) Sewer Pipes

157 ASTM D 5 Standard Test Method for Penetration of Bituminous Materials D 3282

Standard Classificaion of soils and soil-aggregate

mixtures for highway construction

158 ASTM D 36

Standard Test Method for Softening Point of Bitumen (Ring-

and-Ball Apparatus) D 3517

Standard specifications for Fiberglass pressure

pipe

159 ASTM D 92

Standard Test Method for Flash and Fire Points by Cleveland

Open Cup D 3567

Standard practice for determining dimensions of

Fiberglass pipe and fittings

160 ASTM D 113 Standard Test Method for Ductility of Bituminous Materials D 3569

Standard specification for joint sealant , hot-applied

, elastomeric jet-fuel-resistant-tyre for portland

cement concrete pavements

161 ASTM D 402

Standard Test Method for Distillation of Cut-Back Asphaltic

(Bituminous) Products D 3639

Standard test method for classification of asbestos

by quebec standard test

162 ASTM D 449

Standard Specification for Asphalt Used in Dampproofing and

Waterproofing D 3681

Standard Test Method for Chemical Resistance of

"Fibreglass"Pipe in a Delfected Condition

163 ASTM D 979 Standard Practice for Sampling Bituminous Paving Mixtures D 3754

Standard Specification for "Fibreglass"Sewer and

Industrial Pipes

164 ASTM D 995

Standard Specification for Mixing Plants for Hot-Mixed, Hot-

Laid Bituminous Paving Mixtures D 3839 - 94a


Fiberglass pipe

165 ASTM D 1751

Standard Specification for Preformed Expansion Joint Filler

for Concrete Paving and Structural Construction

(Nonextruding and Resilient Bituminous Types) D 4318 - 95a

Standard test Method for Liquid Limit Plastic Limit

and Plasticity Index of Soils

166 ASTM D 1754

Standard Test Method for Effect of Heat and Air on Asphaltic

Materials (Thin-Film Oven Test) D 5349

Standard Test Method for Determination of the

Moisture and Volatile Content of Sulfonated and

Sulfated Oils by Hot-Plate Method

167 ASTM D 2042

Standard Test Method for Solubility of Asphalt Materials in

Trichloroethylene D 6307

Standard Test Method for Asphalt Content of Hot-

Mix Asphalt by Ignition Method

168 ASTM D 2170

Standard Test Method for Kinematic Viscosity of Asphalts

(Bitumens) E 154 -83

Standard test method for water vapor retarders

used in contact with Earth under concrete slabs,

walls, ground cover

169 ASTM D 2419

Standard Test Method for Sand Equivalent Value of Soils and

Fine Aggregate E 1155 - 87

Standard test method for determining floor flatness

and levelness using the F-Number

170 ASTM D 5349

Standard Test Method for Determination of the Moisture and

Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate

Method F 436 - 93 Standard specification for hardened steel washers

171 ASTM A 123

Standard Specification for Zinc (hot dip galvanized) coatings

on Iron and Steel Products F 512 - 95

Standard practice for smooth -wall poly (Vinyl

chloride) (PVC) conduit and fittings for

underground installation

172 ASTM D 3754

Standard Specification for "Fibreglass"Sewer and Industrial

PipesVOL. 4.02

Construction: Concrete & Aggregates

173 ASTM D 6307

Standard Test Method for Asphalt Content of Hot-Mix Asphalt

by Ignition MethodVOL. 4.03

Construction: Road & Paving Materials: Vehicle-

Pavement Systems

174 ASTM D 3262 Standard Specification for "Fibreglass"(Glass-Fibre-Reinforced Thermosetting-Resin) Sewer PipesVOL. 4.04

Construction: Roofing, Waterproofing & Bituminous

Material

175 ASTM D 3681 Standard Test Method for Chemical Resistance of "Fibreglass"Pipe in a Delfected ConditionAWS B2-1-84

Standard for welding procedure and performance

qualification

176 ASTM C29 Standard Test Methods for Bulk Density and Voids in AggregateC105/A21.5

Polyethylene Encasement for Ductile Iron Pipe

Systems

177 AWS AWS B2-1-84 Standard for welding procedure and performance qualification C111/A21.11

Rubber - Gasket Joints for Ductile - Iron Pressure

Pipe and Fittings

178 AWWA C105/A21.5 Polyethylene Encasement for Ductile Iron Pipe Systems C151/A21.51 Ductile Iron Pipe , Centrifugally Cast for Water

179 AWWA C111/A21.11

Rubber - Gasket Joints for Ductile - Iron Pressure Pipe and

Fittings C606 Grooved and Shouldered Joints

180 AWWA C151/A21.51 Ductile Iron Pipe , Centrifugally Cast for Water C950 Fiberglass Pressure Pipe

181 AWWA C606 Grooved and Shouldered Joints BS 65

Specification for vitrified clay pipes, fittings

andducts, also flexible mechanical joints for use

solely with surface water pipes and fittings

182 AWWA C950 Fiberglass Pressure Pipe BS 434-1

Bitumen road emulsions (anionic and

cationic)Specification for bitumen road emulsions

183 BS BS 65

Specification for vitrified clay pipes, fittings andducts, also

flexible mechanical joints for use solely with surface water

pipes and fittings BS 434-2 Code of practice for use of bitumen road emulsions

184 BS BS 434-1

Bitumen road emulsions (anionic and cationic)Specification

for bitumen road emulsions BS 594-1

Hot rolled asphalt for roads and other paved areas.

Specification for constituent materials and asphalt

mixtures

185 BS BS 434-2 Code of practice for use of bitumen road emulsions BS 594-2

Specification for the transport, laying and

compaction of rolled asphalt

186 BS BS 594-1

Hot rolled asphalt for roads and other paved areas.

Specification for constituent materials and asphalt mixtures BS 598-100

Sampling and examination of bituminous mixtures

for roads and other paved areas. Methods for

sampling For analysis

187 BS BS 594-2

Specification for the transport, laying and compaction of

rolled asphalt BS 598-101

Methods for preparatory treatments of samples for

analysis

188 BS BS 598-100

Sampling and examination of bituminous mixtures for roads

and other paved areas. Methods for sampling For analysis BS 598-102 Analytical Test Methods

189 BS BS 598-101 Methods for preparatory treatments of samples for analysis BS 598-104

Methods of test for the determination of density and

compaction

190 BS BS 598-102 Analytical Test Methods BS 598-105

Methods of test for the determination of texture

depth

191 BS BS 598-104

Methods of test for the determination of density and

compaction BS 598-107

Method of test for the determination of the

composition of design wearing course rolled

asphalt

192 BS BS 598-105 Methods of test for the determination of texture depth BS 598-108

Methods for determination of the condition of the

binder on coated chippings and for measurement

of the rate of spread of coated chippings

193 BS BS 598-107

Method of test for the determination of the composition of

design wearing course rolled asphalt BS 598-109

Methods for the assessment of the compaction

performance of a roller and recommended

procedures for the measurement of the

temperature of bituminous mixtures

194 BS BS 598-108

Methods for determination of the condition of the binder on

coated chippings and for measurement of the rate of spread

of coated chippings BS 1881-202

Testing concrete. Recommendations for surface

hardness testing by rebound hammer

195 BS BS 598-109

Methods for the assessment of the compaction performance

of a roller and recommended procedures for the

measurement of the temperature of bituminous mixtures BS 1881-203

Testing concrete. Recommendations for

measurement of velocity of ultrasonic pulses in

concrete

196 BS BS 1881-202

Testing concrete. Recommendations for surface hardness

testing by rebound hammer BS 1881-204

Testing concrete. Recommendations on the use of

electromagnetic covermeters

197 BS BS 1881-203

Testing concrete. Recommendations for measurement of

velocity of ultrasonic pulses in concrete BS 1881-207

Testing concrete. Recommendations for the

assessment of concrete strength by near-to-

surface tests

198 BS BS 1881-204

Testing concrete. Recommendations on the use of

electromagnetic covermeters BS 1924-1

Stabilized materials for civil engineering purposes.

General requirements,sampling, sample

preparation and tests on materials before

stabilization

199 BS BS 1881-207

Testing concrete. Recommendations for the assessment of

concrete strength by near-to-surface tests BS 1924-2

Stabilized materials for civil engineering purposes.

Methods of test for cement-stabilized and lime-

stabilized materials

200 BS BS 1924-1

Stabilized materials for civil engineering purposes. General

requirements,sampling, sample preparation and tests on

materials before stabilization BS 3690-1

Bitumens for building and civil engineering.

Specification for bitumens for roads and other

paved areas

201 BS BS 1924-2

Stabilized materials for civil engineering purposes. Methods of

test for cement-stabilized and lime-stabilized materials BS 3690-2


Specification for bitumens for industrial purposes

202 BS BS 3690-1

Bitumens for building and civil engineering. Specification for

bitumens for roads and other paved areas BS 3690-3


Specification for mixtures of bitumen with pitch, tar

and Trinidad lake asphalt

203 BS BS 3690-2


bitumens for industrial purposes BS 4346-1

Joints and fittings for use with unplasticized PVC

pressure pipes. Injection moulded unplasticized

PVC fittings for solvent welding for use potable

water supply

204 BS BS 3690-3


mixtures of bitumen with pitch, tar and Trinidad lake asphalt BS 4987-1

Coated macadam for roads and other paved areas.

Specification for constituent materials and for

mixtures

205 BS BS EN 12591

Bitumen and bituminous binders. Specifications for paving

grade bitumens BS 4987-2


Specification for transport, laying and compaction

206 BS BS 4346-1

Joints and fittings for use with unplasticized PVC pressure

pipes. Injection moulded unplasticized PVC fittings for solvent

welding for use potable water supply BS 5835-Part 1

Recommendations for testing of aggregates.

Compactibility test for graded aggregates

207 BS BS 4987-1


Specification for constituent materials and for mixtures BS 7533-4

Pavements constructed with clay, natural stone or

concrete pavers. Code of practice for the

construction of pavements of precast concrete

flags or natural stone slabs

208 BS BS 4987-2


Specification for transport, laying and compaction BS EN 124

Gully tops and manhole tops for vehicular and

pedestrian areas. Design requirements, type

testing, marking, quality control

209 BS BS 5835-1

Recommendations for testing of aggregates. Compactibility

test for graded aggregates BS EN 288-3

Specification and approval of welding procedures

for metallic materials. Welding procedure tests for

the arc welding of steels

210 BS BS 7533-4

Pavements constructed with clay, natural stone or concrete

pavers. Code of practice for the construction of pavements of

precast concrete flags or natural stone slabs BS EN 295-1

Vitrified clay pipes and fittings and pipe joints for

drains and sewers. Requirements

211 BS BS EN 288-3

Specification and approval of welding procedures for metallic

materials. Welding procedure tests for the arc welding of

steels BS EN 295-2


drains and sewers. Quality control and sampling

212 BS BS EN 295-1

Vitrified clay pipes and fittings and pipe joints for drains and

sewers. Requirements BS EN 295-3


drains and sewers. Test methods

213 BS BS EN 295-2


sewers. Quality control and sampling BS EN 295-4


drains and sewers. Requirements for special

fittings, adaptors and compatible accessories

214 BS BS EN 295-3


sewers. Test methods BS EN 295-5


drains and sewers. Requirements for perforated

vitrified clay pipes and fittings

215 BS BS EN 295-4


sewers. Requirements for special fittings, adaptors and

compatible accessoriesBS EN 295- Part 7 Requirements for vitrified clay pipes and joints for

pipe jacking

216 BS BS EN 295-5


sewers. Requirements for perforated vitrified clay pipes and

fittings BS EN 485

Tolerances on shape and dimensions for cold-

rolled products

217 BSIBS 12

Portland Cement BS EN 12591

Bitumen and bituminous binders. Specifications for

paving grade bitumens

218 BSIBS 1377 Part 1

Soil for civil engineering purposes - General requirement and

sample preparationBS 12

Portland Cement


Soil for civil engineering purposes - Classification tests BS 729

Specification for hot dip galvanized coatings on iron

and steel articles


Soil for civil engineering purposes - Chemical and electro-

chemical tests BS 750

Specification for underground fire hydrants and

surface box frames and covers


Soil for civil engineering purposes- Compaction -related tests BS 812: Part 2 Methods for determination of density


Soil for civil engineering purpose- Compressibility,

permeability and durability tests BS 812: Part 3 Testing Aggregates


Consolidation and permeability tests in hydraulic cells & with

pore pressure measurement BS 812: Part 100

General Requirements for Apparatus and

Calibration


Soil for civil engineering purposes- Shear strength tests (total

Stress) BS 812: Part 101 Guide to Sampling and Testing Aggregates


Soil for civil engineering purposes- Shear strength tests

(effective Stress)BS 812 Part 102

Test aggregates, Method for sampling


Soil for civil engineering purposes- In-Situ testsBS 812 Part 103

Testing Aggregates- Methods for determination of

particle size and distribution

227 BSIBS 1881 Part 116

Method for determination of compressive strength of concrete

cubesBS 812 Part 103.1

Test aggregates, Sieve tests

228 BSIBS 1881 Part 117

Method for determination of compressive tensile splitting

strengthBS 812 Part 103.2

Test aggregates, Sedimentation tests

229 BSI BS 1881 Part 118 Method for determination of flexural strength BS 812 Part 105.1 Testing aggregates, Flakiness Index

230 BSIBS 1881 Part 120

Method for determination of the compressive strength of

concrete coresBS 812 Part 105.2

Test aggregates, Elongation index of coarse aggregate

231 BSIBS 1881 Part 122

Testing ConcreteBS 812 Part 106

Method for determination of shell content in coarse

aggregate

232 BSIBS 1881 Part 124

Method for analysis of hardened concreteBS 812 Part 110

Method for determination of aggregate crushing

value (ACV)

233 BSI BS 2494

Specification for Elastomeric seals for joints in pipework and

pipelines BS 812 Part 111

Method for determination of ten per cent fines value (TFV)

234 BSI BS 3224 Lighting fittings for civil land aerodromesBS 812 Part 112

Method for determination of aggregate impact

value (AIV)

235 BSIBS 4027

Sulfate-resisting portland cementBS 812 Part 117

Method for determination of water-soluble chloride

salts

236 BSIBS 4449

Carbon steel bars for the reinforcement of concreteBS 812 Part 118

Test aggregates, Method for determination

sulphate content

237 BSI BS 5268 Part 2

Code of practice for Permissible Stress Design, Materials and

WorkmanshipBS 812 Part 120

Method for testing and classifying drying shrinkage

of aggregate in concrete

238 BSI BS 5480

GRP pipes, joints and fittings for use for water supply or

sewerageBS 882

Aggregates from natural sources for concrete

239 BSI BS 6031 Code of practice for Earthworks BS 1010 Part 2 Draw-off taps and above-ground stopvalves


Precast concrete flags, kerbs, channels, edfings & quadrants BS 1247:Part 1

Specification for Galvanized ferrous or stainless

steel manhole steps


Test aggregates, Method for samplingBS 1377 Part 1

Soil for civil engineering purposes - General

requirement and sample preparation


Test aggregates, Sieve testsBS 1377 Part 2

Soil for civil engineering purposes - Classification

tests

243 BSIBS 812 Part 103.2

Test aggregates, Sedimentation testsBS 1377 Part 3

Soil for civil engineering purposes - Chemical and

electro-chemical tests

244 BSIBS 812 Part 105.1

Test aggregates, Sedimentation testsBS 1377 Part 4

Soil for civil engineering purposes- Compaction -

related tests

245 BSI

BS 812 Part 105.2Test aggregates, Elongation index of coarse aggregate

BS 1377 Part 5 Soil for civil engineering purpose- Compressibility,

permeability and durability tests

246 BSI

BS 812 Part 106Method for determination of shell content in coarse aggregate

BS 1377 Part 6 Consolidation and permeability tests in hydraulic

cells & with pore pressure measurement


Method for determination of aggregate crushing value (ACV)BS 1377 Part 7

Soil for civil engineering purposes- Shear strength

tests (total Stress)


Method for determination of ten per cent fines value (TFV)BS 1377 Part 8

Soil for civil engineering purposes- Shear strength

tests (effective Stress)

249 BSI BS 812 Part 112 Method for determination of aggregate impact value (AIV) BS 1377 Part 9 Soil for civil engineering purposes- In-Situ tests

250 BSI

BS 812 Part 117Method for determination of water-soluble chloride salts BS 1461

Hot Dipped Galvanized coatings on fabricated iron

and steel articles- Specifications amd Test

methods


Test aggregates, Method for determination sulphate contentBS 1881:Part 101

Testing Concrete: Method of sampling fresh

concrete on site


Method for testing and classifying drying shrinkage of

aggregate in concrete BS 1881 Part 102 Method for determination of slump

253 BSIBS 882

Aggregates from natural sources for concreteBS 1881:Part 103

Testing Concrete: Method for determination of

compacting factor

254 BSI BS EN 124

Gully tops and manhole tops for vehicular and pedestrian

areas. Design requirements, type testing, marking, quality

controlBS 1881:Part 104 Testing Concrete: Methods for determination of

Vebe time

255 BSIBS EN 295- Part 7

Requirements for vitrified clay pipes and joints for pipe jackingBS 1881:Part 105

Testing Concrete: Methods for determination of

flow

256 BSI BS EN 485 Tolerances on shape and dimensions for cold-rolled products BS 1881 Part 106

Methods for determination of air content of fresh

concrete

257 BSI BS 729

Specification for hot dip galvanized coatings on iron and steel

articles BS 1881 Part 107

Method for determination of density of compacted

fresh concrete

258 BSI BS 750

Specification for underground fire hydrants and surface box

frames and coversBS 1881:Part 108

Testing Concrete: Method for making test cubes

from fresh concrete

259 BSI BS 1010 Part 2 Draw-off taps and above-ground stopvalves BS 1881:Part 109

Testing Concrete: Method for making test beams

from fresh concrete

260 BSI BS 1247:Part 1

Specification for Galvanized ferrous or stainless steel

manhole steps BS 1881:Part 110 Testing Concrete: Method for making test cylinders from fresh concrete

261 BSI BS 1881 Part 102 Method for determination of slump BS 1881:Part 111 Testing Concrete: Method for normal curing of test specimens (20 method)

262 BSI BS 1881 Part 107

Method for determination of density of compacted fresh

concreteBS 1881:Part 112

Testing Concrete: Method for accelerated curing of

test cubes

263 BSI BS 1881 Part 114 Methods for determination of density of hardened concreteBS 1881:Part 113

Testing Concrete: Method for making and curing no-

fines test cubes

264 BSI BS 1881 Part 106 Methods for determination of air content of fresh concrete BS 1881 Part 114

Methods for determination of density of hardened

concrete

265 BSI BS 3148

Methods of test for water for making concrete (including notes

on the suitability of the water)BS 1881:Part 115

Testing Concrete: Specifications for compression

testing machine for concrete

266 BSI BS 3416

Specification for bitumen-based coatings for cold application,

suitable for use in contact with potable waterBS 1881 Part 116

Method for determination of compressive strength

of concrete cubes

267 BSI BS 4466

Specification for scheduling, dimensioning, bending and

cutting of steel reinforcement for concreteBS 1881 Part 117

Method for determination of compressive tensile

splitting strength

268 BSI BS 4483 Specification for steel fabric for the reinforcement of concreteBS 1881 Part 118

Method for determination of flexural strength

269 BSI

BS 4660Specification for unplasticized polyvinyl chloride (PVC-U)

pipes and plastics fittings of nominal sizes 110 and 160 for

below ground gravity drainage and sewerage

BS 1881:Part 119Testing Concrete: Method for determination of

compressive strength using the portions of beams

broken in flexure (equivalent cube method)

270 BSI BS 5075 :Part 1

Specification for accelerating admixtures, retarding

admixtures and water reducing admixturesBS 1881 Part 120

Method for determination of the compressive

strength of concrete cores

271 BSI BS 5075 :Part 3 Specification for superplasticizing admixturesBS 1881:Part 121

Testing Concrete: Method for determination of

static modulus of elasticity in compression

272 BSI BS 5328 Part 1 Guide to specifying concrete BS 1881 Part 122 Testing Concrete

273 BSI BS 5328 Part 2 Methods for specifying concrete mixes BS 1881 Part 124 Method for analysis of hardened concrete


Specification for the procedures to be used in producing and

transporting concreteBS 1881:Part 125

Method for making and sampling fresh concrete in

the laboratory


Specification for the procedures to be used in sampling,

testing and assessing compliance of concreteBS 1881:Part 127

Testing Concrete: Method of verifying the

performance of a concrete cube compression

machine using the comparative cube test

276 BSI BS 5481

Specification for unplasticized PVC pipe and fittings for gravity

sewersBS 1881:Part 129

Method for determination of density of partially

compacted semi-dry fresh concrete

277 BSI BS 5728 Part 7 Specification for single mechanical type metersBS 1881:Part 201

Guide to the use of non-destructive methods of test

for hardened concrete

278 BSI BS 5834 Part 2 Specification for small surface boxes BS 2494

Specification for Elastomeric seals for joints in

pipework and pipelines

279 BSI BS 5834 Part 3 Specification for large surface boxes BS 3148

Methods of test for water for making concrete

(including notes on the suitability of the water)

280 BSI BS 5975 Code of practice for falsework BS 3224 Lighting fittings for civil land aerodromes

281 BSI BS 6007

Specification for rubber-insulated cables for electric power

and lighting 3262 Part 1 Hot Applied Thermoplastic Road Marking Materials

282 BSI BS 6073 Part 2 Method for specifying precast concrete masonry units BS 3416

Specification for bitumen-based coatings for cold

application, suitable for use in contact with potable

water

283 BSI BS 6073 Part 1 Specification for precast concrete masonry units BS 4027 Sulfate-resisting portland cement

284 BSIBS 6717:Part 1

Specification for paving blocksBS 4449

Carbon steel bars for the reinforcement of concrete

285 BSI 5400-Part 1 Steel, concrete and composite bridges -General Statement BS 4466

Specification for scheduling, dimensioning, bending

and cutting of steel reinforcement for concrete

286 BSI 5400-Part 2 Steel, concrete and composite bridges (Complete set) BS 4483

Specification for steel fabric for the reinforcement

of concrete

287 BSI 5400-Part 3 Steel, concrete and composite bridges (Complete set)

BS 4660

Specification for unplasticized polyvinyl chloride

(PVC-U) pipes and plastics fittings of nominal sizes

110 and 160 for below ground gravity drainage and

sewerage

288 BSI 5400-Part 4 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 1

Specification for accelerating admixtures, retarding

admixtures and water reducing admixtures

289 BSI 5400-Part 5 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 2

Concrete admixtures-Specification for air-

entraining admixtures

290 BSI 5400-Part 6 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 3 Specification for superplasticizing admixtures

291 BSI 5400-Part 7 Steel, concrete and composite bridges (Complete set) BS 5268 Part 2

Code of practice for Permissible Stress Design,

Materials and Workmanship

292 BSI 5400-Part 8 Steel, concrete and composite bridges (Complete set) BS 5328 Part 1 Guide to specifying concrete

293 BSI 5400-Part 9 Steel, concrete and composite bridges (Complete set) BS 5328 Part 2 Methods for specifying concrete mixes

294 BSI 5400-Part 10 Steel, concrete and composite bridges (Complete set) BS 5328 Part 3

Specification for the procedures to be used in

producing and transporting concrete

295 BSI 3262 Part 1 Hot Applied Thermoplastic Road Marking Materials BS 5328 Part 4

Specification for the procedures to be used in

sampling, testing and assessing compliance of

concrete

296 BSI 1461

Hot Dipped Galvanized coatings on fabricated iron and steel

articles- Specifications amd Test methods 5400-Part 1

Steel, concrete and composite bridges -General

Statement

297 BSI BS 5075: Part 2 5400-Part 2

Steel, concrete and composite bridges (Complete

set)

298 BSI 5930 Code of practice for Site Investigations 5400-Part 3


set)

299 BSI BS 812: Part 2 Methods for determination of density 5400-Part 4


set)

300 BSI BS 812: Part 3 Testing Aggregates 5400-Part 5


set)

301 BSI BS 812: Part 100 General Requirements for Apparatus and Calibration 5400-Part 6


set)

302 BSI BS 812: Part 101 Guide to Sampling and Testing Aggregates 5400-Part 7


set)


Testing Aggregates- Methods for determination of particle

size and distribution 5400-Part 8


set)

304 BSIBS 1881:Part 101

Testing Concrete: Method of sampling fresh concrete on site 5400-Part 9


set)

305 BSIBS 1881:Part 103

Testing Concrete: Method for determination of compacting

factor 5400-Part 10


set)

306 BSIBS 1881:Part 104

Testing Concrete: Methods for determination of Vebe time BS 5480

GRP pipes, joints and fittings for use for water

supply or sewerage

307 BSIBS 1881:Part 105

Testing Concrete: Methods for determination of flow BS 5481

Specification for unplasticized PVC pipe and fittings

for gravity sewers

308 BSIBS 1881:Part 108

Testing Concrete: Method for making test cubes from fresh

concrete BS 5728 Part 7 Specification for single mechanical type meters

309 BSIBS 1881:Part 109

Testing Concrete: Method for making test beams from fresh

concrete BS 5834 Part 2 Specification for small surface boxes

310 BSIBS 1881:Part 110

Testing Concrete: Method for making test cylinders from fresh

concrete BS 5834 Part 3 Specification for large surface boxes

311 BSIBS 1881:Part 111

Testing Concrete: Method for normal curing of test specimens

(20 method) BS 5930 Code of practice for Site Investigations

312 BSIBS 1881:Part 112

Testing Concrete: Method for accelerated curing of test cubes BS 5975 Code of practice for falsework

313 BSIBS 1881:Part 113

Testing Concrete: Method for making and curing no-fines test

cubes BS 6007

Specification for rubber-insulated cables for electric

power and lighting

314 BSIBS 1881:Part 115

Testing Concrete: Specifications for compression testing

machine for concrete BS 6031 Code of practice for Earthworks

315 BSIBS 1881:Part 119

Testing Concrete: Method for determination of compressive

strength using the portions of beams broken in flexure

(equivalent cube method) BS 6073 Part 1 Specification for precast concrete masonry units

316 BSIBS 1881:Part 121

Testing Concrete: Method for determination of static modulus

of elasticity in compression BS 6073 Part 2

Method for specifying precast concrete masonry

units

317 BSIBS 1881:Part 125

Method for making and sampling fresh concrete in the

laboratoryBS 6717:Part 1

Specification for paving blocks

318 BSIBS 1881:Part 127

Testing Concrete: Method of verifying the performance of a

concrete cube compression machine using the comparative

cube testBS 7263 Part 1 Precast concrete flags, kerbs, channels, edfings &

quadrants

319 BSIBS 1881:Part 129 Method for determination of density of partially compacted

semi-dry fresh concrete 301-95

Standard spec. for Hubless cast iron soil pipe &

fittings for sanitary and storm drain, waste & vent

piping applications

320 BSIBS 1881:Part 201

Guide to the use of non-destructive methods of test for

hardened concrete 310-95

Spec. for coupling for use in connection with

hubless cast iron soil pipe and fittings

321 BSI Cast Iron Soil Pipe and Fittings Handbook

322 CISPI 301-95

Standard spec. for Hubless cast iron soil pipe & fittings for

sanitary and storm drain, waste & vent piping applications C119-53

Method of test for flat and elongated particles in

coarse aggregate

323 CISPI 310-95

Spec. for coupling for use in connection with hubless cast iron

soil pipe and fittings C572 - 74

Corps of engineers specification for

polyvinylchloride waterstop

324 CISPI Cast Iron Soil Pipe and Fittings Handbook MSP-1-97 Manual of Standard Practice

325 CRD C119-53

Method of test for flat and elongated particles in coarse

aggregate18503

Clinker bricks for paving; requirements, testing,

control

326 CRD C572 - 74

Corps of engineers specification for polyvinylchloride

waterstop1048-1

Testing Concrete: Testing of Fresh Concrete

327 CRSI MSP-1-97 Manual of Standard Practice1048-2

Testing Concrete: Testing of Hardened Concrete

(Specimens Taken In-Situ)

328 DIN

1048-1

Testing Concrete: Testing of Fresh Concrete

1048-4

Test Methods for Concrete: Determination of

Compressive Strength in hardened Concrete in

Structures & Components- Application of

Reference Lines and Evaluation with Special

Methods

329 DIN1048-2

Testing Concrete: Testing of Hardened Concrete (Specimens

Taken In-Situ)1048-5

Testing Concrete: Testing of Hardened Concrete

(Specimens Prepared in Mould)

330 DIN

1048-4

Test Methods for Concrete: Determination of Compressive

Strength in hardened Concrete in Structures & Components-

Application of Reference Lines and Evaluation with Special

Methods

3352-Part 4Cast iron gate valveswith elastomeric obturator

seatings and inside screw stem

331 DIN1048-5

Testing Concrete: Testing of Hardened Concrete (Specimens

Prepared in Mould)DIN EN 993-16

Dense shaped refractory products- Methods of test-

part 16

332 DIN18503

Clinker bricks for paving; requirements, testing, controlDIN ISO 10545 Part 1

Ceramic Tiles- Determination of modulus of rupture

and breaking strength

333 DIN3352-Part 4

Cast iron gate valveswith elastomeric obturator seatings and

inside screw stem Traffic Control Mnaual

334 DINDIN EN 993-16

Dense shaped refractory products- Methods of test- part 16 AAP-550 Runway and Taxiway Edge Lighting system

335 DINDIN ISO 10545 Part 1

Ceramic Tiles- Determination of modulus of rupture and

breaking strength AAS-200

Announcement of availability -Standards for

Specifying Construction of Airports

336 DM Traffic Control Mnaual AAS-200 Approved Airport Equipment

337 FAA AAP-550 Runway and Taxiway Edge Lighting system AAS-200

Specification for Airport Light Bases, Transformer

Housings, Junction Boxes , and Accessories

338 FAA AAS-200

Announcement of availability -Standards for Specifying

Construction of Airports AAS-200

Specification for L-821 Panels for Remote Control

of Airport Lighting

339 FAA AAS-200 Approved Airport Equipment AS-580 Taxiway Centerline Lighting System

340 FAA AAS-200

Specification for Airport Light Bases, Transformer Housings,

Junction Boxes , and Accessories TT-P-1952D Paint, Traffic and Airfield Marking, Waterborne

341 FAA AAS-200

Specification for L-821 Panels for Remote Control of Airport

Lighting TT-B-1325C Beads (Glass Spheres) Retro-Reflective

342 FAA AS-580 Taxiway Centerline Lighting System Uniform Plumbing Code

343 FS TT-P-1925D Paint, Traffic and Airfield Marking, Waterborne C2 National electrical safety code

344 FS TT-B-1325C Beads (Glass Spheres) Retro-Reflective C2-1997 National Electrical Safety Code

345 IAPMO Uniform Plumbing Code C57.12.91

Standard Test code for dry - Type distribution and

power transformers

346 IEEE C2 National electrical safety code Std 303- Petroleum and Chemical Applications

347 IEEE C2-1997 National Electrical Safety Code Std 81

Guide for Measuring earth resistivity ground

impedance , and earth surface potentials of a

ground system

348 IEEE C57.12.91

Standard Test code for dry - Type distribution and power

transformers TT - S 001543A Sealing Compound : Silicone Rubber Base

349 IEEE Std 303- Petroleum and Chemical Applications TT - S 00227E

Sealing Compound, Elastomeric Type , Multic

Component

350 IEEE Std 81

Guide for Measuring earth resistivity ground impedance , and

earth surface potentials of a ground system TT- S - 0230C

Sealing Compound: Clastomeric Type , Single

Component

351 Interim Federal TT - S 001543A Sealing Compound : Silicone Rubber Base ISO 160 Asbestos Cement Pressure Pipes and Joints

352 Interim Federal TT - S 00227E Sealing Compound, Elastomeric Type , Multic Component 21010

High-Voltage Electrical Inspection of Pipeline

Coatings Prior to Installation

353 Interim Federal TT- S - 0230C Sealing Compound: Clastomeric Type , Single Component 21021

Mitigation of alternating current and lightning

effects on metallic structures & corrosion control

systems

354 ISO ISO 160 Asbestos Cement Pressure Pipes and Joints 21042

External Protective Coatings for Joints Fittings, and

Valves on Metallic Underground or Pipelines

355 NACE 21010

High-Voltage Electrical Inspection of Pipeline Coatings Prior

to Installation 53002

Control of External Corrosion on Underground or

submerged Metallic Piping Systems

356 NACE 21021

Mitigation of alternating current and lightning effects on

metallic structures & corrosion control systems

Standard of Installation - Reference & Guide to

Good workmanship in Elec. Construction

357 NACE 21042

External Protective Coatings for Joints Fittings, and Valves on

Metallic Underground or Pipelines ANSI C80.1 Rigid Steel Conduit - Zinc coated (GRC)

358 NACE 53002

Control of External Corrosion on Underground or submerged

Metallic Piping Systems ANSI C80.3 Electrical Metallic Tubing - Zinc Coated (EMT)

359 NECA

Standard of Installation - Reference & Guide to Good

workmanship in Elec. Construction FB 1

Fittings , Cast Metal Boxes , and Conduit Bodies

for Conduit and Cable assemblies

360 NEMA ANSI C80.1 Rigid Steel Conduit - Zinc coated (GRC) NEMA 250

Enclosures for electrical equipment (1000 volts

maximum)

361 NEMA ANSI C80.3 Electrical Metallic Tubing - Zinc Coated (EMT) OS 1

Sheet - Steel Outlet Boxes , Device Boxes ,

Covers , and Box Supports

362 NEMA FB 1

Fittings , Cast Metal Boxes , and Conduit Bodies for Conduit

and Cable assemblies OS 2

Non metallic outlet boxes , device boxes , covers ,

and box supports

363 NEMA NEMA 250 Enclosures for electrical equipment (1000 volts maximum) PB-1 Panelboards

364 NEMA OS 1

Sheet - Steel Outlet Boxes , Device Boxes , Covers , and Box

Supports PB1.1

General instructions for proper installation,

operation and maintenance of panelboards

365 NEMA OS 2

Non metallic outlet boxes , device boxes , covers , and box

supports RN 1

Polyvinyl - Chloride (PVC) Externally coated

galvanized rigid steel conduit and intermediate

metal conduit

366 NEMA PB-1 Panelboards TC 10

PVC Plastic Communications Ducts and Fittings for

Underground Installation

367 NEMA PB1.1

General instructions for proper installation, operation and

maintenance of panelboards TC 2

Electrical Polyvinyl Chloride (PVC) Tubing (EPT)

and Conduit (EPC - 40 & EPC - 80)

368 NEMA RN 1

Polyvinyl - Chloride (PVC) Externally coated galvanized rigid

steel conduit and intermediate metal conduit TC 3

PVC Fittings for use with rigid PVC conduit and

tubing

369 NEMA TC 10

PVC Plastic Communications Ducts and Fittings for

Underground Installation WC - 5

Thermoplastic - Insulated wire and cable for the

transmission and distribution of electrical energy

370 NEMA TC 2

Electrical Polyvinyl Chloride (PVC) Tubing (EPT) and Conduit

(EPC - 40 & EPC - 80) WC - 7

Cross- Linked thermosetting polyethylene -

Insulated wire and cable for the transmission &

distribution

371 NEMA TC 3 PVC Fittings for use with rigid PVC conduit and tubing NETAATS

Acceptance Testing Specifications for Elect. Power

distribution equipment and systems

372 NEMA WC - 5

Thermoplastic - Insulated wire and cable for the transmission

and distribution of electrical energy NFPA - 101 Life Safety Code

373 NEMA WC - 7

Cross- Linked thermosetting polyethylene - Insulated wire and

cable for the transmission & distribution NFPA - 30 Flammable and Combustible Liquids Code

374 NETA NETAATS

Acceptance Testing Specifications for Elect. Power

distribution equipment and systems NFPA - 70 National Electrical Code - (vol 1 of 3)

375 NFPA NFPA - 101 Life Safety Code NFPA - 70 National Electrical Code - (vol 2 of 3)

376 NFPA NFPA - 30 Flammable and Combustible Liquids Code NFPA - 70 National Electrical Code - (vol 3 of 3)

377 NFPA NFPA - 70 National Electrical Code - (vol 1 of 3) National Electrical Code (Vol 1 of 2)

378 NFPA NFPA - 70 National Electrical Code - (vol 2 of 3) National Electrical Code (Vol 2 of 2)

379 NFPA NFPA - 70 National Electrical Code - (vol 3 of 3) 96-12

Guide for Containing Debris Generated During

Paint Removal Operations

380 NFPA National Electrical Code (Vol 1 of 2) SP 12

Surface Preparation and Cleaning of Steel and

other hard materials bt high & ultra pressure water

jetting

381 NFPA National Electrical Code (Vol 2 of 2) SSPC-Guide 6

Guide for Containing Debris Generated During

Paint Removal Operations

382 SSPC 96-12

Guide for Containing Debris Generated During Paint Removal

Operations

Systems and Specifications - Steel Structures

Painting Manual - Volume - 2 (1 of 2)

383 SSPC SP 12

Surface Preparation and Cleaning of Steel and other hard

materials bt high & ultra pressure water jetting

Systems and Specifications- Steel Structures

Painting Manual (Vol - 2) (2 of 2)

384 SSPC SSPC-Guide 6

Guide for Containing Debris Generated During Paint Removal

Operations UL 1479

Standard for Fire Tests of through - Penetration

Firestops

385 SSPC

Systems and Specifications - Steel Structures Painting

Manual - Volume - 2 (1 of 2) UL 467 Standard for Grounding and Bonding Equipment

386 SSPC

Systems and Specifications- Steel Structures Painting Manual

(Vol - 2) (2 of 2) UL 486A

Standard for Wire Connectors and Soldering Lugs

for use with Copper Conductors

387 UL UL 1479 Standard for Fire Tests of through - Penetration Firestops UL 486A

Standard for Wire Connectors and Soldering Lugs

for use with Copper Conductors

388 UL UL 467 Standard for Grounding and Bonding Equipment UL 486B

Standard for Wire Connectors for use with

Aluminium conductors

389 UL UL 486A

Standard for Wire Connectors and Soldering Lugs for use

with Copper Conductors UL 778 Motor - Operated Water Pumps

390 UL UL 486A

Standard for Wire Connectors and Soldering Lugs for use

with Copper Conductors

391 UL UL 486B

Standard for Wire Connectors for use with Aluminium

conductors

392 UL UL 778 Motor - Operated Water Pumps

--- Last Item ----

Checked & Issued by : Prepared by:

standard comparison

Documents