Download - STANDARD Comparison
-
1 AASHTO
Standard specification for transportation materials and
methods of sampling and testing (1 of 2)
Standard specification for transportation materials
and methods of sampling and testing (1 of 2)
2 AASHTO
Standard specification for transportation materials and
methods of sampling and testing (2 of 2)
Standard specification for transportation materials
and methods of sampling and testing (2 of 2)
3 ACI ACI ACI 234R Guide for the use of silica fume in concrete ACI 234R Guide for the use of silica fume in concrete
4 ACI ACI ACI 301 Standard Specification for Structural Concrete ACI 301 Standard Specification for Structural Concrete
5 ACI ACI ACI 304R
Guide for Measuring , Mixing Transporting , and Placing
Concrete ACI 304R
Guide for Measuring , Mixing Transporting , and
Placing Concrete
6 ACI ACI ACI 305R Hot weather concreting ACI 305R Hot weather concreting
7 ACI ACI ACI 318R
Building code requirements for structural concrete and
commentary ACI 318R
Building code requirements for structural concrete
and commentary
8 ACI ACI ACI 336.1 Standard specification for construction of Drilled Piers ACI 336.1
Standard specification for construction of Drilled
Piers
9 ACI ACI ACI 336.3R Design and construction of drilled piers ACI 336.3R Design and construction of drilled piers
10 ACI ACI ACI 347R Guide to Formwork for concrete ACI 347R Guide to Formwork for concrete
11 ACI ACI ACI 504 R Guide to Sealing Joints in concrete structures ACI 504 R Guide to Sealing Joints in concrete structures
12 ACI ACI SP - 66
Detailing Manual - (Concrete Reinforcement , Placing drawing
for Reinforced concrete) SP - 66
Detailing Manual - (Concrete Reinforcement ,
Placing drawing for Reinforced concrete)
13 AI ASQC Mix Design Methods for Asphalt Concrete & Other Hot MixesMS-2
Mix Design Methods for Asphalt Concrete & Other
Hot Mixes
14 ANNEX 14 ANNEX 14 Abbreviations and Symbols - Volume 1 Abbreviations and Symbols - Volume 1
15 ANSI ASQC Q9001
Quality Systems - Model for quality assurance in design,
development, production, installation & servicing ASQC Q9001
Quality Systems - Model for quality assurance in
design, development, production, installation &
servicing
16 ANSI ASQC Q92
Quality Systems - Model for quality assurance in
production,installation & servicing ASQC Q92
Quality Systems - Model for quality assurance in
production,installation & servicing
17 ANSI B1.20.1 Pipe Threads, General Purpose (Inch) B1.20.1 Pipe Threads, General Purpose (Inch)
18 ANSI C105/A21.5 Polythylene encasement for ductile iron pipe systems C105/A21.5
Polythylene encasement for ductile iron pipe
systems
19 ANSI C110/A21.10 Ductile Iron and Gray - Iron fittings for Water and other liquids C110/A21.10
Ductile Iron and Gray - Iron fittings for Water and
other liquids
20 API API - 5L Specification for Line Pipe API - 5L Specification for Line Pipe
21 API API -1542 Airport Equipment Marking for Fuel Identification API -1542 Airport Equipment Marking for Fuel Identification
22 AS/NZS 4455 Masonry units and segmental pavers 4455 Masonry units and segmental pavers
23 AS/NZS 4456 Masonry units and segmental pavers- Methods of Test 4456
Masonry units and segmental pavers- Methods of
Test
24 ASME A112.21.1M Floor Drains A112.21.1M Floor Drains
25 ASME A112.36.2M Cleanouts A112.36.2M Cleanouts
26 ASME A13.1 Scheme for the identification of piping systems A13.1 Scheme for the identification of piping systems
27 ASME B16.4 Gray Iron Threaded Fittings B16.4 Gray Iron Threaded Fittings
28 ASME B31.1 Power Piping - Pressure Piping B31.1 Power Piping - Pressure Piping
29 ASME B31.1 Cases No. 21 B31.1 Cases No. 21
30 ASME B31.1a Code for Pressure Piping , B31 - Power Piping B31.1a Code for Pressure Piping , B31 - Power Piping
31 ASME B31.9 Code for Pressure Piping , B31 B31.9 Code for Pressure Piping , B31
32 ASME B31.9 Building Services Piping B31.9 Building Services Piping
33 ASME B31.9a Building Services Piping - Pressure Piping , B31 B31.9a Building Services Piping - Pressure Piping , B31
34 ASME Section IX Interpretations -Volume 36 Section IX Interpretations -Volume 36
35 ASME Section IX Interpretations -Volume 38 Section IX Interpretations -Volume 38
36 ASME Section IX Boiler & Pressure Vessel Code Section IX Boiler & Pressure Vessel Code
37 ASME Section IX Boiler and pressure vessel code Section IX Boiler and pressure vessel code
38 ASTM A 106 - 95
Standard specification for seamless carbon steel pipe for high
- temperature service A 36/A 36M -96 Standard specification for carbon structure steel
39 ASTM A 185-94
Standard specification for steel welded wire fabric , plain for
concrete reinforcement A 47 - 90
Standard specification for Ferritic Malleable iron
castings
40 ASTM A 193/A 193M -96a
Standard specification for alloy-steel and stainless steel
bolting materials for high-temp. service A 48 - 94a Standard specification for gray iron castings
41 ASTM A 194/A 194M - 96
Standard specification for carbon and alloy steel nuts for bolts
for high - pressure and high temp. service A 53 - 97
Standard specification for pipe, steel, black and hot
dipped ,zinc coated, welded and seamless
42 ASTM A 328 / A328M-93a Standard specification for steel sheet piling A 82
Standard specification for steel wire , plain for
concrete reinforcement
43 ASTM A 36/A 36M -96 Standard specification for carbon structure steel A 106 - 95
Standard specification for seamless carbon steel
pipe for high - temperature service
44 ASTM A 377 - 95 Standard Index specification for ductile Iron pressure pipe A 123
Standard Specification for Zinc (hot dip galvanized)
coatings on Iron and Steel Products
45 ASTM A 47 - 90 Standard specification for Ferritic Malleable iron castings A183
Standard Specification for Carbon Steel Track
Bolts and Nuts
46 ASTM A 48 - 94a Standard specification for gray iron castings A 185-94
Standard specification for steel welded wire fabric ,
plain for concrete reinforcement
47 ASTM A 497 - 95
Standard specification for steel welded wire fabric , deformed,
for concrete, reinforcement A 193/A 193M -96a
Standard specification for alloy-steel and stainless
steel bolting materials for high-temp. service
48 ASTM A 53 - 97
Standard specification for pipe, steel, black and hot dipped
,zinc coated, welded and seamless A 194/A 194M - 96
Standard specification for carbon and alloy steel
nuts for bolts for high - pressure and high temp.
service
49 ASTM A 536 - 84 Standard specification for Ductile Iron Castings A 328 / A328M-93a Standard specification for steel sheet piling
50 ASTM A 551- 94 Standard Specification for Steel Tires A 377 - 95
Standard Index specification for ductile Iron
pressure pipe
51 ASTM A 564/ A564M
Standard specification for hot rolled & cold finished age
hardening stainless steel bars & shapes A 497 - 95
Standard specification for steel welded wire fabric ,
deformed, for concrete, reinforcement
52 ASTM A 615/A 615M - 96a
Standard specification for deformed and plain billet - steel
bars for concrete reinforcement A 536 - 84 Standard specification for Ductile Iron Castings
53 ASTM A 733 - 93
Standard specification for welded and seamless carbon steel
and sustenitic stainless steel pipe nipples A 551- 94 Standard Specification for Steel Tires
54 ASTM A 775 / A 775M- 95a
Standard specification for Epoxy - coated reinforcing steel
bars A 564/ A564M
Standard specification for hot rolled & cold finished
age hardening stainless steel bars & shapes
55 ASTM A 82 - 95a
Standard specification for steel wire , plain for concrete
reinforcement A 615/A 615M - 96a
Standard specification for deformed and plain billet -
steel bars for concrete reinforcement
-
56 ASTM A183 A 733 - 93
Standard specification for welded and seamless
carbon steel and sustenitic stainless steel pipe
nipples
57 ASTM B 3 - 95 Standards specification for soft or annealed copper wire A 775 / A 775M- 95a
Standard specification for Epoxy - coated
reinforcing steel bars
58 ASTM B 33 - 94
Standard specification for tinned soft or annealed copper wire
for electrical purposes B 3 - 95
Standards specification for soft or annealed copper
wire
59 ASTM B 8 - 95
Standard specification for Concentric -Lay -Stranded Copper
Conductors, Hard, Medium-hard, soft B 33 - 94
Standard specification for tinned soft or annealed
copper wire for electrical purposes
60 ASTM C 1037 -85
Standard specification for inspections of underground precast
concrete utility structures B 8 - 95
Standard specification for Concentric -Lay -
Stranded Copper Conductors, Hard, Medium-hard,
soft
61 ASTM C 1064 - 86
Standard test method for temperature of freshly mixed
portland cement concrete C29 Standard Test Methods for Bulk Density and Voids in Aggregate
62 ASTM C 1105 - 95
Standard test method for length change of concrete due to
alkali - Carbonate rock reaction C 31 /C 31M
Standard practice for making and curing concrete
test specimens in the field
63 ASTM C 114 - 94
Standard test method for chemical analysis of hydraulic
cement C 33 Standard specification for concrete aggregates
64 ASTM C 117 - 95
Standard test method for materials - Sieve in Mineral
Aggregates by washing C 39
Standard test method for compressive strength of
cylindrical concrete specimens
65 ASTM C 127 - 88
Standard test method for specific gravity and absorption of
Coarse aggregate C 40
Standard practice for organic impurities in fine
aggregate for concrete
66 ASTM C 128 - 93
Standard test method for specific gravity and absorption of
fine aggregate C 42
Standard test method for obtaining and testing
drilled cores and sawed beams of concrete
67 ASTM C 131 - 96
Standard test method for resistance to degradation of small
size coarse aggregate by abrasion C 76 - 95a
Standard specification for reinforced concrete
culvert, storm drain , and sewer pipe
68 ASTM C 136 - 96
Standard test method for sieve analysis of fine and coarse
aggregates C 88
Standard test method for soundness of aggregates
by use of sodium sulfate or magnesium sulfate
69 ASTM C 142 - 78
Standard test method for clay lumps and friable particles in
aggregates C 94 Standard specification for ready - mixed concrete
70 ASTM C 143 - 90a Standard test method for slump of hydraulic cement concrete C 97
Standard Test Methods for Absorption and Bulk
Specific Gravity of Dimension Stone
71 ASTM C 144 - 93 Standard specification for aggregate for masonry mortar C 99
Standard Test Method for Modulus of Rupture of
Dimension Stone
72 ASTM C 150 - 96 Standard specification for portland cement C 110
Standard Test Methods for Physical Testing of
Quicklime, Hydrated Lime, and Limestone
73 ASTM C 171 - 95 Standard specification for sheet materials for curing concrete C 114 - 94
Standard test method for chemical analysis of
hydraulic cement
74 ASTM C 172 - 90 Standard practice for sampling freshly mixed concrete C 117 - 95
Standard test method for materials - Sieve in
Mineral Aggregates by washing
75 ASTM C 186 - 96
standard test method for heat of hydration of hydraulic
cement C 123
Standard Test Method for Lightweight Pieces in
Aggregate
76 ASTM C 191 - 62
Standard test method for time of setting of hydraulic cement
by vicat needle C 127 - 88
Standard test method for specific gravity and
absorption of Coarse aggregate
77 ASTM C 192 / C 192M -95
Standard practice for making and curing concrete test
specimens in the laboratory C 128 - 93
Standard test method for specific gravity and
absorption of fine aggregate
78 ASTM C 227 - 90
Standard test method for potential Alkali Reactivity of cement -
Aggregate combinations C 131 - 96
Standard test method for resistance to degradation
of small size coarse aggregate by abrasion
79 ASTM C 270 - 96a Standard specification for mortar for unit masonry C 136 - 96
Standard test method for sieve analysis of fine and
coarse aggregates
80 ASTM C 289 - 94
Standard test method for potential alkali Reactivity
Aggregates (chemical method) C 142 - 78
Standard test method for clay lumps and friable
particles in aggregates
81 ASTM C 295 - 90
Standard guide for petrographic examination of aggregates
for concrete C 143 - 90a
Standard test method for slump of hydraulic
cement concrete
82 ASTM C 309 - 95
Standard specification for liquid membrane -forming
compound for curing concrete C 144 - 93
Standard specification for aggregate for masonry
mortar
83 ASTM C 31 /C 31M - 96
Standard practice for making and curing concrete test
specimens in the field C 150 - 96 Standard specification for portland cement
84 ASTM C 31/ C31M - 95
Standard Practice for making and curing concrete test
specimens in the field C 157
Standard Test Method for Length Change of
Hardened Hydraulic-Cement, Mortar, and Concrete
85 ASTM C 311 - 96b
Standard test methods for sampling and testing fly ash natural
pozzolans for use as a mineral admixture C 171 - 95
Standard specification for sheet materials for
curing concrete
86 ASTM C 33 - 93 Standard specification for concrete aggregates C 172 - 90
Standard practice for sampling freshly mixed
concrete
87 ASTM C 387 - 95
Standard specification for packaged , dry , combined
materials for mortar and concrete C 186 - 96
standard test method for heat of hydration of
hydraulic cement
88 ASTM C 39 - 94
Standard test method for compressive strength of cylindrical
concrete specimens C 191 - 62
Standard test method for time of setting of
hydraulic cement by vicat needle
89 ASTM C 39 -96
Standard test method for compressive strength of cylindrical
concrete specimens C 192 / C 192M -95
Standard practice for making and curing concrete
test specimens in the laboratory
90 ASTM C 40 - 92
Standard practice for organic impurities in fine aggregate for
concrete C 227 - 90
Standard test method for potential Alkali Reactivity
of cement - Aggregate combinations
91 ASTM C 42 - 94
Standard test method for obtaining and testing drilled cores
and sawed beams of concrete C 232 Standard Test Methods for Bleeding of Concrete
92 ASTM C 494 - 92 Standard specification for chemical admixtures for concrete C 241
Standard Test Method for Abrasion Resistance of
Stone Subjected to Foot Traffic
93 ASTM C 586 - 92
Standard test method for potential Alkali Reactivity of
carbonate rocks for concrete aggregates C 270 - 96a Standard specification for mortar for unit masonry
94 ASTM C 618 - 96a
Standard specification for Coal fly Ash and Raw or Calcined
Natural Pozzolan for use as a mineral Admixture in concrete C 289 - 94
Standard test method for potential alkali Reactivity
Aggregates (chemical method)
95 ASTM C 76 - 95a
Standard specification for reinforced concrete culvert, storm
drain , and sewer pipe C 295 - 90
Standard guide for petrographic examination of
aggregates for concrete
96 ASTM C 857 - 95
Standard practice for minimum structural design loading for
underground precast concrete utility structures C 309 - 95
Standard specification for liquid membrane -
forming compound for curing concrete
97 ASTM C 858 - 83
Standard specification for underground precast concrete
utility structures C 311 - 96b
Standard test methods for sampling and testing fly
ash natural pozzolans for use as a mineral
admixture
-
98 ASTM C 88 - 90
Standard test method for soundness of aggregates by use of
sodium sulfate or magnesium sulfate C 387 - 95
Standard specification for packaged , dry ,
combined materials for mortar and concrete
99 ASTM C 881 -90
Standard specification for Epoxy - Resin - Base Bonding
systems for concrete C 494 - 92
Standard specification for chemical admixtures for
concrete
100 ASTM C 891 - 90
Standard practice for installation of underground precast
concrete utility structures C 535
Standard Test Method for Resistance to
Degradation of Large-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
101 ASTM C 920 - 95 Standard specification for Elastomeric joint Sealants C 586 - 92
Standard test method for potential Alkali Reactivity
of carbonate rocks for concrete aggregates
102 ASTM C 94 - 96 Standard specification for ready - mixed concrete C 618 - 96a
Standard specification for Coal fly Ash and Raw or
Calcined Natural Pozzolan for use as a mineral
Admixture in concrete
103 ASTM D 1556 -90
Standard test method for density and unit weight of soil in
place by the sand -cone method(reapprov.) C 857 - 95
Standard practice for minimum structural design
loading for underground precast concrete utility
structures
104 ASTM D 1556 -90
Standard test method of density and unit weight of soil in
place by the sand-cone method C 858 - 83
Standard specification for underground precast
concrete utility structures
105 ASTM D 1557 - 91
Test method for laboratory compaction characteristics of soil
using modified effort C 881 -90
Standard specification for Epoxy - Resin - Base
Bonding systems for concrete
106 ASTM D 1559 -89
Standard test method for resistance to plastic flow of
bituminous mixtures using marshall apparatus C 891 - 90
Standard practice for installation of underground
precast concrete utility structures
107 ASTM D 1599 - 88
Standard test method for short - time hydraulic failure
pressure of plastic pipe , tubing and fittings C 920 - 95
Standard specification for Elastomeric joint
Sealants
108 ASTM D 1652 - 90 Standard test methods for epoxy content of epoxy resins C 936
Standard Specification for Solid Concrete
Interlocking Paving Units
109 ASTM D 1751 - 83
Standard specification for preformed expansion joint filler for
concrete paving and structural constr. C 1037 -85
Standard specification for inspections of
underground precast concrete utility structures
110 ASTM D 1883 - 94 Standard test method for CBR of laboratory - compacted soils C 1064 - 86
Standard test method for temperature of freshly
mixed portland cement concrete
111 ASTM D 1896 - 93
Standard practice for transfer molding test specimens of
thermosetting compounds C 1105 - 95
Standard test method for length change of
concrete due to alkali - Carbonate rock reaction
112 ASTM D 209 - 81 Standard specification for lampblack pigment C 1107
Standard Specification for Packaged Dry, Hydraulic-
Cement Grout (Nonshrink)
113 ASTM D 2167 - 94
Standard test method for density and unit weight of soil in
place by the rubber balloon method D 4 Standard Test Method for Bitumen Content
114 ASTM D 2216 - 92
Standard test method for laboratory determination of water
(moisture ) content of soil and rock D 5
Standard Test Method for Penetration of
Bituminous Materials
115 ASTM D 2276 - 96
Standard test method for particulate contaminant in aviation
fuel by line sampling D 36
Standard Test Method for Softening Point of
Bitumen (Ring-and-Ball Apparatus)
116 ASTM D 2321 - 89
Standard practice for underground installation of
thermoplastic pipe for sewers and other gravity flow
applications D 75 - 87 Standard practice for sampling aggregates
117 ASTM D 2343 - 95
Standard test method for tensile properties of glass fiber
strands , yarns, and rovings used in reinforced plastics D 92
Standard Test Method for Flash and Fire Points by
Cleveland Open Cup
118 ASTM D 2412 -96
Standard test method for determining of external loading
characteristics of plastic pipe by parallel - plate loading D 113
Standard Test Method for Ductility of Bituminous
Materials
119 ASTM D 2489 -84
Standard test method for degree of partice coating of
bituminous aggregate mixtures D 365
Standard test method for soluble nitrocellulose
base solutions
120 ASTM D 2563 - 94
Standard practice for classifying visual defects in glass -
reinforced plastic laminate parts D 402
Standard Test Method for Distillation of Cut-Back
Asphaltic (Bituminous) Products
121 ASTM D 2697 - 86
Standard test method for volume nonvolatile matter in clear or
pigmented coatings D 422 - 63
Standard test method for particle - size analysis of
soils
122 ASTM D 2726
Standard test method for bulk specific gravity and density of
non - absorptive compacted biuminous mixtures D 449
Standard Specification for Asphalt Used in
Dampproofing and Waterproofing
123 ASTM D 2924
Standard test method for external pressure resistance of
Fiberglass pipe D 512 - 89 Standard test method for chloride Ion in water
124 ASTM D 2992
Standard practice for obtaining hydrostatic or pressure design
basis for fiberglass pipe and fittings D 516 - 90 Standard test method for sulfate Ion in water
125 ASTM D 2996 Standard specification for filament - wound fiberglass pipe D 979
Standard Practice for Sampling Bituminous Paving
Mixtures
126 ASTM D 3240
Standard test method for undissolved water in aviation turbine
fuels D 995
Standard Specification for Mixing Plants for Hot-
Mixed, Hot-Laid Bituminous Paving Mixtures
127 ASTM D 3282
Standard Classificaion of soils and soil-aggregate mixtures for
highway construction D 1556 -90
Standard test method for density and unit weight of
soil in place by the sand -cone method(reapprov.)
128 ASTM D 3517 Standard specifications for Fiberglass pressure pipe D 1556 -90
Standard test method of density and unit weight of
soil in place by the sand-cone method
129 ASTM D 3567
Standard practice for determining dimensions of Fiberglass
pipe and fittings D 1557 - 91
Test method for laboratory compaction
characteristics of soil using modified effort
130 ASTM D 3569
Standard specification for joint sealant , hot-applied ,
elastomeric jet-fuel-resistant-tyre for portland cement
concrete pavements D 1559 -89
Standard test method for resistance to plastic flow
of bituminous mixtures using marshall apparatus
131 ASTM D 3639
Standard test method for classification of asbestos by quebec
standard test D 1599 - 88
Standard test method for short - time hydraulic
failure pressure of plastic pipe , tubing and fittings
132 ASTM D 365 Standard test method for soluble nitrocellulose base solutions D 1652 - 90
Standard test methods for epoxy content of epoxy
resins
133 ASTM D 3839 - 94a
Standard practice for underground installation of Fiberglass
pipe D 1751
Standard Specification for Preformed Expansion
Joint Filler for Concrete Paving and Structural
Construction (Nonextruding and Resilient
Bituminous Types)
134 ASTM D 422 - 63 Standard test method for particle - size analysis of soils D 1751 - 83
Standard specification for preformed expansion
joint filler for concrete paving and structural constr.
135 ASTM D 4318 - 95a
Standard test Method for Liquid Limit Plastic Limit and
Plasticity Index of Soils D 1754
Standard Test Method for Effect of Heat and Air on
Asphaltic Materials (Thin-Film Oven Test)
136 ASTM D 512 - 89 Standard test method for chloride Ion in water D 1883 - 94
Standard test method for CBR of laboratory -
compacted soils
-
137 ASTM D 516 - 90 Standard test method for sulfate Ion in water D 1896 - 93
Standard practice for transfer molding test
specimens of thermosetting compounds
138 ASTM D 75 - 87 Standard practice for sampling aggregates D 2042
Standard Test Method for Solubility of Asphalt
Materials in Trichloroethylene
139 ASTM E 1155 - 87
Standard test method for determining floor flatness and
levelness using the F-Number D 209 - 81 Standard specification for lampblack pigment140 ASTM E 154 -83 Standard test method for water vapor retarders used in D 2167 - 94 Standard test method for density and unit weight of
141 ASTM F 436 - 93 Standard specification for hardened steel washers D 2170
Standard Test Method for Kinematic Viscosity of
Asphalts (Bitumens)
142 ASTM F 512 - 95
Standard practice for smooth -wall poly (Vinyl chloride) (PVC)
conduit and fittings for underground installation D 2216 - 92
Standard test method for laboratory determination
of water (moisture ) content of soil and rock
143 ASTMVOL. 4.02
Construction: Concrete & Aggregates D 2276 - 96
Standard test method for particulate contaminant in
aviation fuel by line sampling
144 ASTM
VOL. 4.03 Construction: Road & Paving Materials: Vehicle-Pavement
Systems D 2321 - 89
Standard practice for underground installation of
thermoplastic pipe for sewers and other gravity flow
applications
145 ASTM
VOL. 4.04Construction: Roofing, Waterproofing & Bituminous Material D 2343 - 95
Standard test method for tensile properties of glass
fiber strands , yarns, and rovings used in
reinforced plastics
146 ASTM C 97
Standard Test Methods for Absorption and Bulk Specific
Gravity of Dimension Stone D 2412 -96
Standard test method for determining of external
loading characteristics of plastic pipe by parallel -
plate loading
147 ASTM C 99
Standard Test Method for Modulus of Rupture of Dimension
Stone D 2419
Standard Test Method for Sand Equivalent Value
of Soils and Fine Aggregate
148 ASTM C 110
Standard Test Methods for Physical Testing of Quicklime,
Hydrated Lime, and Limestone D 2489 -84
Standard test method for degree of partice coating
of bituminous aggregate mixtures
149 ASTM C 123 Standard Test Method for Lightweight Pieces in Aggregate D 2563 - 94
Standard practice for classifying visual defects in
glass - reinforced plastic laminate parts
150 ASTM C 157
Standard Test Method for Length Change of Hardened
Hydraulic-Cement, Mortar, and Concrete D 2697 - 86
Standard test method for volume nonvolatile matter
in clear or pigmented coatings
151 ASTM C 232 Standard Test Methods for Bleeding of Concrete D 2726
Standard test method for bulk specific gravity and
density of non - absorptive compacted biuminous
mixtures
152 ASTM C 241
Standard Test Method for Abrasion Resistance of Stone
Subjected to Foot Traffic D 2924
Standard test method for external pressure
resistance of Fiberglass pipe
153 ASTM C 535
Standard Test Method for Resistance to Degradation of Large-
Size Coarse Aggregate by Abrasion and Impact in the Los
Angeles Machine D 2992
Standard practice for obtaining hydrostatic or
pressure design basis for fiberglass pipe and
fittings
154 ASTM C 936
Standard Specification for Solid Concrete Interlocking Paving
Units D 2996
Standard specification for filament - wound
fiberglass pipe
155 ASTM C 1107
Standard Specification for Packaged Dry, Hydraulic-Cement
Grout (Nonshrink) D 3240
Standard test method for undissolved water in
aviation turbine fuels
156 ASTM D 4 Standard Test Method for Bitumen Content D 3262
Standard Specification for "Fibreglass"(Glass-Fibre-
Reinforced Thermosetting-Resin) Sewer Pipes
157 ASTM D 5 Standard Test Method for Penetration of Bituminous Materials D 3282
Standard Classificaion of soils and soil-aggregate
mixtures for highway construction
158 ASTM D 36
Standard Test Method for Softening Point of Bitumen (Ring-
and-Ball Apparatus) D 3517
Standard specifications for Fiberglass pressure
pipe
159 ASTM D 92
Standard Test Method for Flash and Fire Points by Cleveland
Open Cup D 3567
Standard practice for determining dimensions of
Fiberglass pipe and fittings
160 ASTM D 113 Standard Test Method for Ductility of Bituminous Materials D 3569
Standard specification for joint sealant , hot-applied
, elastomeric jet-fuel-resistant-tyre for portland
cement concrete pavements
161 ASTM D 402
Standard Test Method for Distillation of Cut-Back Asphaltic
(Bituminous) Products D 3639
Standard test method for classification of asbestos
by quebec standard test
162 ASTM D 449
Standard Specification for Asphalt Used in Dampproofing and
Waterproofing D 3681
Standard Test Method for Chemical Resistance of
"Fibreglass"Pipe in a Delfected Condition
163 ASTM D 979 Standard Practice for Sampling Bituminous Paving Mixtures D 3754
Standard Specification for "Fibreglass"Sewer and
Industrial Pipes
164 ASTM D 995
Standard Specification for Mixing Plants for Hot-Mixed, Hot-
Laid Bituminous Paving Mixtures D 3839 - 94a
Standard practice for underground installation of
Fiberglass pipe
165 ASTM D 1751
Standard Specification for Preformed Expansion Joint Filler
for Concrete Paving and Structural Construction
(Nonextruding and Resilient Bituminous Types) D 4318 - 95a
Standard test Method for Liquid Limit Plastic Limit
and Plasticity Index of Soils
166 ASTM D 1754
Standard Test Method for Effect of Heat and Air on Asphaltic
Materials (Thin-Film Oven Test) D 5349
Standard Test Method for Determination of the
Moisture and Volatile Content of Sulfonated and
Sulfated Oils by Hot-Plate Method
167 ASTM D 2042
Standard Test Method for Solubility of Asphalt Materials in
Trichloroethylene D 6307
Standard Test Method for Asphalt Content of Hot-
Mix Asphalt by Ignition Method
168 ASTM D 2170
Standard Test Method for Kinematic Viscosity of Asphalts
(Bitumens) E 154 -83
Standard test method for water vapor retarders
used in contact with Earth under concrete slabs,
walls, ground cover
169 ASTM D 2419
Standard Test Method for Sand Equivalent Value of Soils and
Fine Aggregate E 1155 - 87
Standard test method for determining floor flatness
and levelness using the F-Number
170 ASTM D 5349
Standard Test Method for Determination of the Moisture and
Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate
Method F 436 - 93 Standard specification for hardened steel washers
171 ASTM A 123
Standard Specification for Zinc (hot dip galvanized) coatings
on Iron and Steel Products F 512 - 95
Standard practice for smooth -wall poly (Vinyl
chloride) (PVC) conduit and fittings for
underground installation
172 ASTM D 3754
Standard Specification for "Fibreglass"Sewer and Industrial
PipesVOL. 4.02
Construction: Concrete & Aggregates
173 ASTM D 6307
Standard Test Method for Asphalt Content of Hot-Mix Asphalt
by Ignition MethodVOL. 4.03
Construction: Road & Paving Materials: Vehicle-
Pavement Systems
174 ASTM D 3262 Standard Specification for "Fibreglass"(Glass-Fibre-Reinforced Thermosetting-Resin) Sewer PipesVOL. 4.04
Construction: Roofing, Waterproofing & Bituminous
Material
175 ASTM D 3681 Standard Test Method for Chemical Resistance of "Fibreglass"Pipe in a Delfected ConditionAWS B2-1-84
Standard for welding procedure and performance
qualification
-
176 ASTM C29 Standard Test Methods for Bulk Density and Voids in AggregateC105/A21.5
Polyethylene Encasement for Ductile Iron Pipe
Systems
177 AWS AWS B2-1-84 Standard for welding procedure and performance qualification C111/A21.11
Rubber - Gasket Joints for Ductile - Iron Pressure
Pipe and Fittings
178 AWWA C105/A21.5 Polyethylene Encasement for Ductile Iron Pipe Systems C151/A21.51 Ductile Iron Pipe , Centrifugally Cast for Water
179 AWWA C111/A21.11
Rubber - Gasket Joints for Ductile - Iron Pressure Pipe and
Fittings C606 Grooved and Shouldered Joints
180 AWWA C151/A21.51 Ductile Iron Pipe , Centrifugally Cast for Water C950 Fiberglass Pressure Pipe
181 AWWA C606 Grooved and Shouldered Joints BS 65
Specification for vitrified clay pipes, fittings
andducts, also flexible mechanical joints for use
solely with surface water pipes and fittings
182 AWWA C950 Fiberglass Pressure Pipe BS 434-1
Bitumen road emulsions (anionic and
cationic)Specification for bitumen road emulsions
183 BS BS 65
Specification for vitrified clay pipes, fittings andducts, also
flexible mechanical joints for use solely with surface water
pipes and fittings BS 434-2 Code of practice for use of bitumen road emulsions
184 BS BS 434-1
Bitumen road emulsions (anionic and cationic)Specification
for bitumen road emulsions BS 594-1
Hot rolled asphalt for roads and other paved areas.
Specification for constituent materials and asphalt
mixtures
185 BS BS 434-2 Code of practice for use of bitumen road emulsions BS 594-2
Specification for the transport, laying and
compaction of rolled asphalt
186 BS BS 594-1
Hot rolled asphalt for roads and other paved areas.
Specification for constituent materials and asphalt mixtures BS 598-100
Sampling and examination of bituminous mixtures
for roads and other paved areas. Methods for
sampling For analysis
187 BS BS 594-2
Specification for the transport, laying and compaction of
rolled asphalt BS 598-101
Methods for preparatory treatments of samples for
analysis
188 BS BS 598-100
Sampling and examination of bituminous mixtures for roads
and other paved areas. Methods for sampling For analysis BS 598-102 Analytical Test Methods
189 BS BS 598-101 Methods for preparatory treatments of samples for analysis BS 598-104
Methods of test for the determination of density and
compaction
190 BS BS 598-102 Analytical Test Methods BS 598-105
Methods of test for the determination of texture
depth
191 BS BS 598-104
Methods of test for the determination of density and
compaction BS 598-107
Method of test for the determination of the
composition of design wearing course rolled
asphalt
192 BS BS 598-105 Methods of test for the determination of texture depth BS 598-108
Methods for determination of the condition of the
binder on coated chippings and for measurement
of the rate of spread of coated chippings
193 BS BS 598-107
Method of test for the determination of the composition of
design wearing course rolled asphalt BS 598-109
Methods for the assessment of the compaction
performance of a roller and recommended
procedures for the measurement of the
temperature of bituminous mixtures
194 BS BS 598-108
Methods for determination of the condition of the binder on
coated chippings and for measurement of the rate of spread
of coated chippings BS 1881-202
Testing concrete. Recommendations for surface
hardness testing by rebound hammer
195 BS BS 598-109
Methods for the assessment of the compaction performance
of a roller and recommended procedures for the
measurement of the temperature of bituminous mixtures BS 1881-203
Testing concrete. Recommendations for
measurement of velocity of ultrasonic pulses in
concrete
196 BS BS 1881-202
Testing concrete. Recommendations for surface hardness
testing by rebound hammer BS 1881-204
Testing concrete. Recommendations on the use of
electromagnetic covermeters
197 BS BS 1881-203
Testing concrete. Recommendations for measurement of
velocity of ultrasonic pulses in concrete BS 1881-207
Testing concrete. Recommendations for the
assessment of concrete strength by near-to-
surface tests
198 BS BS 1881-204
Testing concrete. Recommendations on the use of
electromagnetic covermeters BS 1924-1
Stabilized materials for civil engineering purposes.
General requirements,sampling, sample
preparation and tests on materials before
stabilization
199 BS BS 1881-207
Testing concrete. Recommendations for the assessment of
concrete strength by near-to-surface tests BS 1924-2
Stabilized materials for civil engineering purposes.
Methods of test for cement-stabilized and lime-
stabilized materials
200 BS BS 1924-1
Stabilized materials for civil engineering purposes. General
requirements,sampling, sample preparation and tests on
materials before stabilization BS 3690-1
Bitumens for building and civil engineering.
Specification for bitumens for roads and other
paved areas
201 BS BS 1924-2
Stabilized materials for civil engineering purposes. Methods of
test for cement-stabilized and lime-stabilized materials BS 3690-2
Bitumens for building and civil engineering.
Specification for bitumens for industrial purposes
202 BS BS 3690-1
Bitumens for building and civil engineering. Specification for
bitumens for roads and other paved areas BS 3690-3
Bitumens for building and civil engineering.
Specification for mixtures of bitumen with pitch, tar
and Trinidad lake asphalt
203 BS BS 3690-2
Bitumens for building and civil engineering. Specification for
bitumens for industrial purposes BS 4346-1
Joints and fittings for use with unplasticized PVC
pressure pipes. Injection moulded unplasticized
PVC fittings for solvent welding for use potable
water supply
204 BS BS 3690-3
Bitumens for building and civil engineering. Specification for
mixtures of bitumen with pitch, tar and Trinidad lake asphalt BS 4987-1
Coated macadam for roads and other paved areas.
Specification for constituent materials and for
mixtures
205 BS BS EN 12591
Bitumen and bituminous binders. Specifications for paving
grade bitumens BS 4987-2
Coated macadam for roads and other paved areas.
Specification for transport, laying and compaction
206 BS BS 4346-1
Joints and fittings for use with unplasticized PVC pressure
pipes. Injection moulded unplasticized PVC fittings for solvent
welding for use potable water supply BS 5835-Part 1
Recommendations for testing of aggregates.
Compactibility test for graded aggregates
207 BS BS 4987-1
Coated macadam for roads and other paved areas.
Specification for constituent materials and for mixtures BS 7533-4
Pavements constructed with clay, natural stone or
concrete pavers. Code of practice for the
construction of pavements of precast concrete
flags or natural stone slabs
-
208 BS BS 4987-2
Coated macadam for roads and other paved areas.
Specification for transport, laying and compaction BS EN 124
Gully tops and manhole tops for vehicular and
pedestrian areas. Design requirements, type
testing, marking, quality control
209 BS BS 5835-1
Recommendations for testing of aggregates. Compactibility
test for graded aggregates BS EN 288-3
Specification and approval of welding procedures
for metallic materials. Welding procedure tests for
the arc welding of steels
210 BS BS 7533-4
Pavements constructed with clay, natural stone or concrete
pavers. Code of practice for the construction of pavements of
precast concrete flags or natural stone slabs BS EN 295-1
Vitrified clay pipes and fittings and pipe joints for
drains and sewers. Requirements
211 BS BS EN 288-3
Specification and approval of welding procedures for metallic
materials. Welding procedure tests for the arc welding of
steels BS EN 295-2
Vitrified clay pipes and fittings and pipe joints for
drains and sewers. Quality control and sampling
212 BS BS EN 295-1
Vitrified clay pipes and fittings and pipe joints for drains and
sewers. Requirements BS EN 295-3
Vitrified clay pipes and fittings and pipe joints for
drains and sewers. Test methods
213 BS BS EN 295-2
Vitrified clay pipes and fittings and pipe joints for drains and
sewers. Quality control and sampling BS EN 295-4
Vitrified clay pipes and fittings and pipe joints for
drains and sewers. Requirements for special
fittings, adaptors and compatible accessories
214 BS BS EN 295-3
Vitrified clay pipes and fittings and pipe joints for drains and
sewers. Test methods BS EN 295-5
Vitrified clay pipes and fittings and pipe joints for
drains and sewers. Requirements for perforated
vitrified clay pipes and fittings
215 BS BS EN 295-4
Vitrified clay pipes and fittings and pipe joints for drains and
sewers. Requirements for special fittings, adaptors and
compatible accessoriesBS EN 295- Part 7 Requirements for vitrified clay pipes and joints for
pipe jacking
216 BS BS EN 295-5
Vitrified clay pipes and fittings and pipe joints for drains and
sewers. Requirements for perforated vitrified clay pipes and
fittings BS EN 485
Tolerances on shape and dimensions for cold-
rolled products
217 BSIBS 12
Portland Cement BS EN 12591
Bitumen and bituminous binders. Specifications for
paving grade bitumens
218 BSIBS 1377 Part 1
Soil for civil engineering purposes - General requirement and
sample preparationBS 12
Portland Cement
219 BSIBS 1377 Part 2
Soil for civil engineering purposes - Classification tests BS 729
Specification for hot dip galvanized coatings on iron
and steel articles
220 BSIBS 1377 Part 3
Soil for civil engineering purposes - Chemical and electro-
chemical tests BS 750
Specification for underground fire hydrants and
surface box frames and covers
221 BSIBS 1377 Part 4
Soil for civil engineering purposes- Compaction -related tests BS 812: Part 2 Methods for determination of density
222 BSIBS 1377 Part 5
Soil for civil engineering purpose- Compressibility,
permeability and durability tests BS 812: Part 3 Testing Aggregates
223 BSIBS 1377 Part 6
Consolidation and permeability tests in hydraulic cells & with
pore pressure measurement BS 812: Part 100
General Requirements for Apparatus and
Calibration
224 BSIBS 1377 Part 7
Soil for civil engineering purposes- Shear strength tests (total
Stress) BS 812: Part 101 Guide to Sampling and Testing Aggregates
225 BSIBS 1377 Part 8
Soil for civil engineering purposes- Shear strength tests
(effective Stress)BS 812 Part 102
Test aggregates, Method for sampling
226 BSIBS 1377 Part 9
Soil for civil engineering purposes- In-Situ testsBS 812 Part 103
Testing Aggregates- Methods for determination of
particle size and distribution
227 BSIBS 1881 Part 116
Method for determination of compressive strength of concrete
cubesBS 812 Part 103.1
Test aggregates, Sieve tests
228 BSIBS 1881 Part 117
Method for determination of compressive tensile splitting
strengthBS 812 Part 103.2
Test aggregates, Sedimentation tests
229 BSI BS 1881 Part 118 Method for determination of flexural strength BS 812 Part 105.1 Testing aggregates, Flakiness Index
230 BSIBS 1881 Part 120
Method for determination of the compressive strength of
concrete coresBS 812 Part 105.2
Test aggregates, Elongation index of coarse aggregate
231 BSIBS 1881 Part 122
Testing ConcreteBS 812 Part 106
Method for determination of shell content in coarse
aggregate
232 BSIBS 1881 Part 124
Method for analysis of hardened concreteBS 812 Part 110
Method for determination of aggregate crushing
value (ACV)
233 BSI BS 2494
Specification for Elastomeric seals for joints in pipework and
pipelines BS 812 Part 111
Method for determination of ten per cent fines value (TFV)
234 BSI BS 3224 Lighting fittings for civil land aerodromesBS 812 Part 112
Method for determination of aggregate impact
value (AIV)
235 BSIBS 4027
Sulfate-resisting portland cementBS 812 Part 117
Method for determination of water-soluble chloride
salts
236 BSIBS 4449
Carbon steel bars for the reinforcement of concreteBS 812 Part 118
Test aggregates, Method for determination
sulphate content
237 BSI BS 5268 Part 2
Code of practice for Permissible Stress Design, Materials and
WorkmanshipBS 812 Part 120
Method for testing and classifying drying shrinkage
of aggregate in concrete
238 BSI BS 5480
GRP pipes, joints and fittings for use for water supply or
sewerageBS 882
Aggregates from natural sources for concrete
239 BSI BS 6031 Code of practice for Earthworks BS 1010 Part 2 Draw-off taps and above-ground stopvalves
240 BSIBS 7263 Part 1
Precast concrete flags, kerbs, channels, edfings & quadrants BS 1247:Part 1
Specification for Galvanized ferrous or stainless
steel manhole steps
241 BSIBS 812 Part 102
Test aggregates, Method for samplingBS 1377 Part 1
Soil for civil engineering purposes - General
requirement and sample preparation
242 BSIBS 812 Part 103
Test aggregates, Sieve testsBS 1377 Part 2
Soil for civil engineering purposes - Classification
tests
243 BSIBS 812 Part 103.2
Test aggregates, Sedimentation testsBS 1377 Part 3
Soil for civil engineering purposes - Chemical and
electro-chemical tests
244 BSIBS 812 Part 105.1
Test aggregates, Sedimentation testsBS 1377 Part 4
Soil for civil engineering purposes- Compaction -
related tests
245 BSI
BS 812 Part 105.2Test aggregates, Elongation index of coarse aggregate
BS 1377 Part 5 Soil for civil engineering purpose- Compressibility,
permeability and durability tests
246 BSI
BS 812 Part 106Method for determination of shell content in coarse aggregate
BS 1377 Part 6 Consolidation and permeability tests in hydraulic
cells & with pore pressure measurement
247 BSIBS 812 Part 110
Method for determination of aggregate crushing value (ACV)BS 1377 Part 7
Soil for civil engineering purposes- Shear strength
tests (total Stress)
248 BSIBS 812 Part 111
Method for determination of ten per cent fines value (TFV)BS 1377 Part 8
Soil for civil engineering purposes- Shear strength
tests (effective Stress)
-
249 BSI BS 812 Part 112 Method for determination of aggregate impact value (AIV) BS 1377 Part 9 Soil for civil engineering purposes- In-Situ tests
250 BSI
BS 812 Part 117Method for determination of water-soluble chloride salts BS 1461
Hot Dipped Galvanized coatings on fabricated iron
and steel articles- Specifications amd Test
methods
251 BSIBS 812 Part 118
Test aggregates, Method for determination sulphate contentBS 1881:Part 101
Testing Concrete: Method of sampling fresh
concrete on site
252 BSIBS 812 Part 120
Method for testing and classifying drying shrinkage of
aggregate in concrete BS 1881 Part 102 Method for determination of slump
253 BSIBS 882
Aggregates from natural sources for concreteBS 1881:Part 103
Testing Concrete: Method for determination of
compacting factor
254 BSI BS EN 124
Gully tops and manhole tops for vehicular and pedestrian
areas. Design requirements, type testing, marking, quality
controlBS 1881:Part 104 Testing Concrete: Methods for determination of
Vebe time
255 BSIBS EN 295- Part 7
Requirements for vitrified clay pipes and joints for pipe jackingBS 1881:Part 105
Testing Concrete: Methods for determination of
flow
256 BSI BS EN 485 Tolerances on shape and dimensions for cold-rolled products BS 1881 Part 106
Methods for determination of air content of fresh
concrete
257 BSI BS 729
Specification for hot dip galvanized coatings on iron and steel
articles BS 1881 Part 107
Method for determination of density of compacted
fresh concrete
258 BSI BS 750
Specification for underground fire hydrants and surface box
frames and coversBS 1881:Part 108
Testing Concrete: Method for making test cubes
from fresh concrete
259 BSI BS 1010 Part 2 Draw-off taps and above-ground stopvalves BS 1881:Part 109
Testing Concrete: Method for making test beams
from fresh concrete
260 BSI BS 1247:Part 1
Specification for Galvanized ferrous or stainless steel
manhole steps BS 1881:Part 110 Testing Concrete: Method for making test cylinders from fresh concrete
261 BSI BS 1881 Part 102 Method for determination of slump BS 1881:Part 111 Testing Concrete: Method for normal curing of test specimens (20 method)
262 BSI BS 1881 Part 107
Method for determination of density of compacted fresh
concreteBS 1881:Part 112
Testing Concrete: Method for accelerated curing of
test cubes
263 BSI BS 1881 Part 114 Methods for determination of density of hardened concreteBS 1881:Part 113
Testing Concrete: Method for making and curing no-
fines test cubes
264 BSI BS 1881 Part 106 Methods for determination of air content of fresh concrete BS 1881 Part 114
Methods for determination of density of hardened
concrete
265 BSI BS 3148
Methods of test for water for making concrete (including notes
on the suitability of the water)BS 1881:Part 115
Testing Concrete: Specifications for compression
testing machine for concrete
266 BSI BS 3416
Specification for bitumen-based coatings for cold application,
suitable for use in contact with potable waterBS 1881 Part 116
Method for determination of compressive strength
of concrete cubes
267 BSI BS 4466
Specification for scheduling, dimensioning, bending and
cutting of steel reinforcement for concreteBS 1881 Part 117
Method for determination of compressive tensile
splitting strength
268 BSI BS 4483 Specification for steel fabric for the reinforcement of concreteBS 1881 Part 118
Method for determination of flexural strength
269 BSI
BS 4660Specification for unplasticized polyvinyl chloride (PVC-U)
pipes and plastics fittings of nominal sizes 110 and 160 for
below ground gravity drainage and sewerage
BS 1881:Part 119Testing Concrete: Method for determination of
compressive strength using the portions of beams
broken in flexure (equivalent cube method)
270 BSI BS 5075 :Part 1
Specification for accelerating admixtures, retarding
admixtures and water reducing admixturesBS 1881 Part 120
Method for determination of the compressive
strength of concrete cores
271 BSI BS 5075 :Part 3 Specification for superplasticizing admixturesBS 1881:Part 121
Testing Concrete: Method for determination of
static modulus of elasticity in compression
272 BSI BS 5328 Part 1 Guide to specifying concrete BS 1881 Part 122 Testing Concrete
273 BSI BS 5328 Part 2 Methods for specifying concrete mixes BS 1881 Part 124 Method for analysis of hardened concrete
274 BSI BS 5328 Part 3
Specification for the procedures to be used in producing and
transporting concreteBS 1881:Part 125
Method for making and sampling fresh concrete in
the laboratory
275 BSI BS 5328 Part 4
Specification for the procedures to be used in sampling,
testing and assessing compliance of concreteBS 1881:Part 127
Testing Concrete: Method of verifying the
performance of a concrete cube compression
machine using the comparative cube test
276 BSI BS 5481
Specification for unplasticized PVC pipe and fittings for gravity
sewersBS 1881:Part 129
Method for determination of density of partially
compacted semi-dry fresh concrete
277 BSI BS 5728 Part 7 Specification for single mechanical type metersBS 1881:Part 201
Guide to the use of non-destructive methods of test
for hardened concrete
278 BSI BS 5834 Part 2 Specification for small surface boxes BS 2494
Specification for Elastomeric seals for joints in
pipework and pipelines
279 BSI BS 5834 Part 3 Specification for large surface boxes BS 3148
Methods of test for water for making concrete
(including notes on the suitability of the water)
280 BSI BS 5975 Code of practice for falsework BS 3224 Lighting fittings for civil land aerodromes
281 BSI BS 6007
Specification for rubber-insulated cables for electric power
and lighting 3262 Part 1 Hot Applied Thermoplastic Road Marking Materials
282 BSI BS 6073 Part 2 Method for specifying precast concrete masonry units BS 3416
Specification for bitumen-based coatings for cold
application, suitable for use in contact with potable
water
283 BSI BS 6073 Part 1 Specification for precast concrete masonry units BS 4027 Sulfate-resisting portland cement
284 BSIBS 6717:Part 1
Specification for paving blocksBS 4449
Carbon steel bars for the reinforcement of concrete
285 BSI 5400-Part 1 Steel, concrete and composite bridges -General Statement BS 4466
Specification for scheduling, dimensioning, bending
and cutting of steel reinforcement for concrete
286 BSI 5400-Part 2 Steel, concrete and composite bridges (Complete set) BS 4483
Specification for steel fabric for the reinforcement
of concrete
287 BSI 5400-Part 3 Steel, concrete and composite bridges (Complete set)
BS 4660
Specification for unplasticized polyvinyl chloride
(PVC-U) pipes and plastics fittings of nominal sizes
110 and 160 for below ground gravity drainage and
sewerage
288 BSI 5400-Part 4 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 1
Specification for accelerating admixtures, retarding
admixtures and water reducing admixtures
289 BSI 5400-Part 5 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 2
Concrete admixtures-Specification for air-
entraining admixtures
290 BSI 5400-Part 6 Steel, concrete and composite bridges (Complete set) BS 5075 :Part 3 Specification for superplasticizing admixtures
291 BSI 5400-Part 7 Steel, concrete and composite bridges (Complete set) BS 5268 Part 2
Code of practice for Permissible Stress Design,
Materials and Workmanship
292 BSI 5400-Part 8 Steel, concrete and composite bridges (Complete set) BS 5328 Part 1 Guide to specifying concrete
293 BSI 5400-Part 9 Steel, concrete and composite bridges (Complete set) BS 5328 Part 2 Methods for specifying concrete mixes
-
294 BSI 5400-Part 10 Steel, concrete and composite bridges (Complete set) BS 5328 Part 3
Specification for the procedures to be used in
producing and transporting concrete
295 BSI 3262 Part 1 Hot Applied Thermoplastic Road Marking Materials BS 5328 Part 4
Specification for the procedures to be used in
sampling, testing and assessing compliance of
concrete
296 BSI 1461
Hot Dipped Galvanized coatings on fabricated iron and steel
articles- Specifications amd Test methods 5400-Part 1
Steel, concrete and composite bridges -General
Statement
297 BSI BS 5075: Part 2 5400-Part 2
Steel, concrete and composite bridges (Complete
set)
298 BSI 5930 Code of practice for Site Investigations 5400-Part 3
Steel, concrete and composite bridges (Complete
set)
299 BSI BS 812: Part 2 Methods for determination of density 5400-Part 4
Steel, concrete and composite bridges (Complete
set)
300 BSI BS 812: Part 3 Testing Aggregates 5400-Part 5
Steel, concrete and composite bridges (Complete
set)
301 BSI BS 812: Part 100 General Requirements for Apparatus and Calibration 5400-Part 6
Steel, concrete and composite bridges (Complete
set)
302 BSI BS 812: Part 101 Guide to Sampling and Testing Aggregates 5400-Part 7
Steel, concrete and composite bridges (Complete
set)
303 BSIBS 812 Part 103
Testing Aggregates- Methods for determination of particle
size and distribution 5400-Part 8
Steel, concrete and composite bridges (Complete
set)
304 BSIBS 1881:Part 101
Testing Concrete: Method of sampling fresh concrete on site 5400-Part 9
Steel, concrete and composite bridges (Complete
set)
305 BSIBS 1881:Part 103
Testing Concrete: Method for determination of compacting
factor 5400-Part 10
Steel, concrete and composite bridges (Complete
set)
306 BSIBS 1881:Part 104
Testing Concrete: Methods for determination of Vebe time BS 5480
GRP pipes, joints and fittings for use for water
supply or sewerage
307 BSIBS 1881:Part 105
Testing Concrete: Methods for determination of flow BS 5481
Specification for unplasticized PVC pipe and fittings
for gravity sewers
308 BSIBS 1881:Part 108
Testing Concrete: Method for making test cubes from fresh
concrete BS 5728 Part 7 Specification for single mechanical type meters
309 BSIBS 1881:Part 109
Testing Concrete: Method for making test beams from fresh
concrete BS 5834 Part 2 Specification for small surface boxes
310 BSIBS 1881:Part 110
Testing Concrete: Method for making test cylinders from fresh
concrete BS 5834 Part 3 Specification for large surface boxes
311 BSIBS 1881:Part 111
Testing Concrete: Method for normal curing of test specimens
(20 method) BS 5930 Code of practice for Site Investigations
312 BSIBS 1881:Part 112
Testing Concrete: Method for accelerated curing of test cubes BS 5975 Code of practice for falsework
313 BSIBS 1881:Part 113
Testing Concrete: Method for making and curing no-fines test
cubes BS 6007
Specification for rubber-insulated cables for electric
power and lighting
314 BSIBS 1881:Part 115
Testing Concrete: Specifications for compression testing
machine for concrete BS 6031 Code of practice for Earthworks
315 BSIBS 1881:Part 119
Testing Concrete: Method for determination of compressive
strength using the portions of beams broken in flexure
(equivalent cube method) BS 6073 Part 1 Specification for precast concrete masonry units
316 BSIBS 1881:Part 121
Testing Concrete: Method for determination of static modulus
of elasticity in compression BS 6073 Part 2
Method for specifying precast concrete masonry
units
317 BSIBS 1881:Part 125
Method for making and sampling fresh concrete in the
laboratoryBS 6717:Part 1
Specification for paving blocks
318 BSIBS 1881:Part 127
Testing Concrete: Method of verifying the performance of a
concrete cube compression machine using the comparative
cube testBS 7263 Part 1 Precast concrete flags, kerbs, channels, edfings &
quadrants
319 BSIBS 1881:Part 129 Method for determination of density of partially compacted
semi-dry fresh concrete 301-95
Standard spec. for Hubless cast iron soil pipe &
fittings for sanitary and storm drain, waste & vent
piping applications
320 BSIBS 1881:Part 201
Guide to the use of non-destructive methods of test for
hardened concrete 310-95
Spec. for coupling for use in connection with
hubless cast iron soil pipe and fittings
321 BSI Cast Iron Soil Pipe and Fittings Handbook
322 CISPI 301-95
Standard spec. for Hubless cast iron soil pipe & fittings for
sanitary and storm drain, waste & vent piping applications C119-53
Method of test for flat and elongated particles in
coarse aggregate
323 CISPI 310-95
Spec. for coupling for use in connection with hubless cast iron
soil pipe and fittings C572 - 74
Corps of engineers specification for
polyvinylchloride waterstop
324 CISPI Cast Iron Soil Pipe and Fittings Handbook MSP-1-97 Manual of Standard Practice
325 CRD C119-53
Method of test for flat and elongated particles in coarse
aggregate18503
Clinker bricks for paving; requirements, testing,
control
326 CRD C572 - 74
Corps of engineers specification for polyvinylchloride
waterstop1048-1
Testing Concrete: Testing of Fresh Concrete
327 CRSI MSP-1-97 Manual of Standard Practice1048-2
Testing Concrete: Testing of Hardened Concrete
(Specimens Taken In-Situ)
328 DIN
1048-1
Testing Concrete: Testing of Fresh Concrete
1048-4
Test Methods for Concrete: Determination of
Compressive Strength in hardened Concrete in
Structures & Components- Application of
Reference Lines and Evaluation with Special
Methods
329 DIN1048-2
Testing Concrete: Testing of Hardened Concrete (Specimens
Taken In-Situ)1048-5
Testing Concrete: Testing of Hardened Concrete
(Specimens Prepared in Mould)
330 DIN
1048-4
Test Methods for Concrete: Determination of Compressive
Strength in hardened Concrete in Structures & Components-
Application of Reference Lines and Evaluation with Special
Methods
3352-Part 4Cast iron gate valveswith elastomeric obturator
seatings and inside screw stem
331 DIN1048-5
Testing Concrete: Testing of Hardened Concrete (Specimens
Prepared in Mould)DIN EN 993-16
Dense shaped refractory products- Methods of test-
part 16
332 DIN18503
Clinker bricks for paving; requirements, testing, controlDIN ISO 10545 Part 1
Ceramic Tiles- Determination of modulus of rupture
and breaking strength
333 DIN3352-Part 4
Cast iron gate valveswith elastomeric obturator seatings and
inside screw stem Traffic Control Mnaual
334 DINDIN EN 993-16
Dense shaped refractory products- Methods of test- part 16 AAP-550 Runway and Taxiway Edge Lighting system
-
335 DINDIN ISO 10545 Part 1
Ceramic Tiles- Determination of modulus of rupture and
breaking strength AAS-200
Announcement of availability -Standards for
Specifying Construction of Airports
336 DM Traffic Control Mnaual AAS-200 Approved Airport Equipment
337 FAA AAP-550 Runway and Taxiway Edge Lighting system AAS-200
Specification for Airport Light Bases, Transformer
Housings, Junction Boxes , and Accessories
338 FAA AAS-200
Announcement of availability -Standards for Specifying
Construction of Airports AAS-200
Specification for L-821 Panels for Remote Control
of Airport Lighting
339 FAA AAS-200 Approved Airport Equipment AS-580 Taxiway Centerline Lighting System
340 FAA AAS-200
Specification for Airport Light Bases, Transformer Housings,
Junction Boxes , and Accessories TT-P-1952D Paint, Traffic and Airfield Marking, Waterborne
341 FAA AAS-200
Specification for L-821 Panels for Remote Control of Airport
Lighting TT-B-1325C Beads (Glass Spheres) Retro-Reflective
342 FAA AS-580 Taxiway Centerline Lighting System Uniform Plumbing Code
343 FS TT-P-1925D Paint, Traffic and Airfield Marking, Waterborne C2 National electrical safety code
344 FS TT-B-1325C Beads (Glass Spheres) Retro-Reflective C2-1997 National Electrical Safety Code
345 IAPMO Uniform Plumbing Code C57.12.91
Standard Test code for dry - Type distribution and
power transformers
346 IEEE C2 National electrical safety code Std 303- Petroleum and Chemical Applications
347 IEEE C2-1997 National Electrical Safety Code Std 81
Guide for Measuring earth resistivity ground
impedance , and earth surface potentials of a
ground system
348 IEEE C57.12.91
Standard Test code for dry - Type distribution and power
transformers TT - S 001543A Sealing Compound : Silicone Rubber Base
349 IEEE Std 303- Petroleum and Chemical Applications TT - S 00227E
Sealing Compound, Elastomeric Type , Multic
Component
350 IEEE Std 81
Guide for Measuring earth resistivity ground impedance , and
earth surface potentials of a ground system TT- S - 0230C
Sealing Compound: Clastomeric Type , Single
Component
351 Interim Federal TT - S 001543A Sealing Compound : Silicone Rubber Base ISO 160 Asbestos Cement Pressure Pipes and Joints
352 Interim Federal TT - S 00227E Sealing Compound, Elastomeric Type , Multic Component 21010
High-Voltage Electrical Inspection of Pipeline
Coatings Prior to Installation
353 Interim Federal TT- S - 0230C Sealing Compound: Clastomeric Type , Single Component 21021
Mitigation of alternating current and lightning
effects on metallic structures & corrosion control
systems
354 ISO ISO 160 Asbestos Cement Pressure Pipes and Joints 21042
External Protective Coatings for Joints Fittings, and
Valves on Metallic Underground or Pipelines
355 NACE 21010
High-Voltage Electrical Inspection of Pipeline Coatings Prior
to Installation 53002
Control of External Corrosion on Underground or
submerged Metallic Piping Systems
356 NACE 21021
Mitigation of alternating current and lightning effects on
metallic structures & corrosion control systems
Standard of Installation - Reference & Guide to
Good workmanship in Elec. Construction
357 NACE 21042
External Protective Coatings for Joints Fittings, and Valves on
Metallic Underground or Pipelines ANSI C80.1 Rigid Steel Conduit - Zinc coated (GRC)
358 NACE 53002
Control of External Corrosion on Underground or submerged
Metallic Piping Systems ANSI C80.3 Electrical Metallic Tubing - Zinc Coated (EMT)
359 NECA
Standard of Installation - Reference & Guide to Good
workmanship in Elec. Construction FB 1
Fittings , Cast Metal Boxes , and Conduit Bodies
for Conduit and Cable assemblies
360 NEMA ANSI C80.1 Rigid Steel Conduit - Zinc coated (GRC) NEMA 250
Enclosures for electrical equipment (1000 volts
maximum)
361 NEMA ANSI C80.3 Electrical Metallic Tubing - Zinc Coated (EMT) OS 1
Sheet - Steel Outlet Boxes , Device Boxes ,
Covers , and Box Supports
362 NEMA FB 1
Fittings , Cast Metal Boxes , and Conduit Bodies for Conduit
and Cable assemblies OS 2
Non metallic outlet boxes , device boxes , covers ,
and box supports
363 NEMA NEMA 250 Enclosures for electrical equipment (1000 volts maximum) PB-1 Panelboards
364 NEMA OS 1
Sheet - Steel Outlet Boxes , Device Boxes , Covers , and Box
Supports PB1.1
General instructions for proper installation,
operation and maintenance of panelboards
365 NEMA OS 2
Non metallic outlet boxes , device boxes , covers , and box
supports RN 1
Polyvinyl - Chloride (PVC) Externally coated
galvanized rigid steel conduit and intermediate
metal conduit
366 NEMA PB-1 Panelboards TC 10
PVC Plastic Communications Ducts and Fittings for
Underground Installation
367 NEMA PB1.1
General instructions for proper installation, operation and
maintenance of panelboards TC 2
Electrical Polyvinyl Chloride (PVC) Tubing (EPT)
and Conduit (EPC - 40 & EPC - 80)
368 NEMA RN 1
Polyvinyl - Chloride (PVC) Externally coated galvanized rigid
steel conduit and intermediate metal conduit TC 3
PVC Fittings for use with rigid PVC conduit and
tubing
369 NEMA TC 10
PVC Plastic Communications Ducts and Fittings for
Underground Installation WC - 5
Thermoplastic - Insulated wire and cable for the
transmission and distribution of electrical energy
370 NEMA TC 2
Electrical Polyvinyl Chloride (PVC) Tubing (EPT) and Conduit
(EPC - 40 & EPC - 80) WC - 7
Cross- Linked thermosetting polyethylene -
Insulated wire and cable for the transmission &
distribution
371 NEMA TC 3 PVC Fittings for use with rigid PVC conduit and tubing NETAATS
Acceptance Testing Specifications for Elect. Power
distribution equipment and systems
372 NEMA WC - 5
Thermoplastic - Insulated wire and cable for the transmission
and distribution of electrical energy NFPA - 101 Life Safety Code
373 NEMA WC - 7
Cross- Linked thermosetting polyethylene - Insulated wire and
cable for the transmission & distribution NFPA - 30 Flammable and Combustible Liquids Code
374 NETA NETAATS
Acceptance Testing Specifications for Elect. Power
distribution equipment and systems NFPA - 70 National Electrical Code - (vol 1 of 3)
375 NFPA NFPA - 101 Life Safety Code NFPA - 70 National Electrical Code - (vol 2 of 3)
376 NFPA NFPA - 30 Flammable and Combustible Liquids Code NFPA - 70 National Electrical Code - (vol 3 of 3)
377 NFPA NFPA - 70 National Electrical Code - (vol 1 of 3) National Electrical Code (Vol 1 of 2)
378 NFPA NFPA - 70 National Electrical Code - (vol 2 of 3) National Electrical Code (Vol 2 of 2)
379 NFPA NFPA - 70 National Electrical Code - (vol 3 of 3) 96-12
Guide for Containing Debris Generated During
Paint Removal Operations
380 NFPA National Electrical Code (Vol 1 of 2) SP 12
Surface Preparation and Cleaning of Steel and
other hard materials bt high & ultra pressure water
jetting
381 NFPA National Electrical Code (Vol 2 of 2) SSPC-Guide 6
Guide for Containing Debris Generated During
Paint Removal Operations
-
382 SSPC 96-12
Guide for Containing Debris Generated During Paint Removal
Operations
Systems and Specifications - Steel Structures
Painting Manual - Volume - 2 (1 of 2)
383 SSPC SP 12
Surface Preparation and Cleaning of Steel and other hard
materials bt high & ultra pressure water jetting
Systems and Specifications- Steel Structures
Painting Manual (Vol - 2) (2 of 2)
384 SSPC SSPC-Guide 6
Guide for Containing Debris Generated During Paint Removal
Operations UL 1479
Standard for Fire Tests of through - Penetration
Firestops
385 SSPC
Systems and Specifications - Steel Structures Painting
Manual - Volume - 2 (1 of 2) UL 467 Standard for Grounding and Bonding Equipment
386 SSPC
Systems and Specifications- Steel Structures Painting Manual
(Vol - 2) (2 of 2) UL 486A
Standard for Wire Connectors and Soldering Lugs
for use with Copper Conductors
387 UL UL 1479 Standard for Fire Tests of through - Penetration Firestops UL 486A
Standard for Wire Connectors and Soldering Lugs
for use with Copper Conductors
388 UL UL 467 Standard for Grounding and Bonding Equipment UL 486B
Standard for Wire Connectors for use with
Aluminium conductors
389 UL UL 486A
Standard for Wire Connectors and Soldering Lugs for use
with Copper Conductors UL 778 Motor - Operated Water Pumps
390 UL UL 486A
Standard for Wire Connectors and Soldering Lugs for use
with Copper Conductors
391 UL UL 486B
Standard for Wire Connectors for use with Aluminium
conductors
392 UL UL 778 Motor - Operated Water Pumps
--- Last Item ----
Checked & Issued by : Prepared by: