West Central Railway

Bulletin No:-67 DRM's Office Bhopal

Dated:-31/7/2013

The Tender Opening Date 13-8-2013.closing time 11.30 Hrs Opening Time 11:45 Hrs Trade Group ALL Please submit your quotation to the office of the Divl. Material Manager DRM's Office before closing time and dates stipulated.

Sr No

Case No Description of Material Qty Unit Consignee

1 98/21/2013/5170/1 Supply of synthesissed 25 watt vhf transreceiver base station 25 watt power output complete with DTMF MIC & following accessories MIC HANGER DC CABLE - mounting bracket, operators hand book standard features built in: 136 to 162 Mhz/146 to 174 Mhz -25 watt RF Power output- Alphanumeric LCD display DTMF Decoder for selective call in item 2-A & 2-B-DTMF decoder & encoder for selective calling & dialing in item 2-B only- simplex press to talk with Builtin high quality speaker mounted in front panel.

1 Set SSE(Sig)/C/BPL

2 98/07/2013/5133/1 Chiller water pump set with motor, pump type end suction back pullout, diffrential head-28 mtrs., BKW water/liquid- 3.32 kw, mkw recommended- 3.70 kw, RPM-2900, suction delivery size-65x40 mm, casing- cast iron, impeller -cast iron, frame size-ND 100L similar to Beacon weir make model no. BCP 40-160, Make- Beacon weir, kirloskar, CG or equal.

1 Set SSE(M)Elect./BPL

3 98/07/2013/5132/1 Condenser Water Pump set with motor, pump type end suction back pullout, diffrential head-26 mtrs., BKW Water/Liquid- 4.46 KW, MKW Recommended-5.50 KW, RPM-2900, Suction delivery size- 65x50mm casing- cast iron, impeller- cast iron,frame size-ND 132S similar to beacon weir make model no. BCP 50-130, Make- Beacon weir kirloskar, CG or equal

1 Set SSE(M)Elect./BPL

4 98/27/2013/5224/1 petroleum jelly suitable for lead acid train lighting battery to IS: 6887-1980 first revison

200 Kgs SSE/TRD/NSZ

5 98/07/2013/5107/1 Blower wheel set (left hand side & right hand side) made of stainless steel, size 315 x 150 x 19mm leel part no. 10000016965 L.H. & 10000016966 of R.H. or equivalent of its, as sutable for double décor LHB type RMPU of EOG AC coaches make Leel, Daulatram, Crompton greaves, Laxmi hydraulics Kapsons industry. (Procurement from RDSO/ICF/RCF approved firms only)

8 Sets SSE/TL-AC/HBJ

6 98/07/2013/5192/1 Leather for foot valve 8 mm thick 130 Kgs. SSE(E/M)/HBJ 7 98/06/2013/5271/1 Oil immersed 20 HP DOL Starter 3 phase, 415V, 50Hz,relay range 0 to 40 Amp

Make Bentax, Siemens, L&T 6 Nos SSE(C&W)/Gen/Itarsi

8 98/06/2013/5272/1 Briefcase Make- Aristrocate, Safari, VIP Specification:- Size-(Length-46cm±2 cm, width- 37cm±2cm, Height-13±2cm)

16 Nos ADME/BPL

9 98/06/2013/5273/1 PVC Flexible copper cable 4sq.mm x 8core Make Finolex, Electrolite and Havells. 200 meters

SSE(C&W)/G/ITARSI

10 98/06/2013/5275/1 Over load relay (Direct Mounting) with built in single phase protection Relay range 6.00-9.30 Amps. Make- BCH, Siemens, L&T

10 Nos SSE(C&W)/G/ITARSI

11 98/06/2013/5276/1 Standard duplex roller chain size 1/2" x 5/16" Pitch 12.7 mm roller dia 8.51mm average weight 1.36 Kg/Meter Make: diamonds, carton, dunlop.

30 Meter SSE(C&W)/G/ITARSI

12 98/07/2013/5277/1 Energy efficient wall mounting fan size 400mm, 230V, 1Phase, 55 watt, 1300 RPM, 50HZ, Make- CGL, Bajaj, Orient, Khaitan

26 Nos SEE/CSRD/HBJ

13 98/07/2013/5278/1 PVC Copper wire/Cord maroon 2 core wire size 24/0.20 mm, 1100 V grade, twin sheathed as per IS 694/1990, Make- anchor, Finolex, HPL, Plaza, CCN

2000

Mtrs SEE/CSRD/HBJ

14 98/06/2013/5279/1 4 pole contactor 415 V, 3 phase, 16-25 Amps. with 1 No+ 1 No Make - BCH, SIEMENS,L&T

10 Nos SSE(C&W)G/Itarsi

15 98/07/2013/5280/1 LED Type Halogen Fitting 10 Watt with lamp, IP 65. Make: Philips or equal. 25 Nos SSE(E/M)/HBJ

16 98/07/2013/5281/1 LED Type Halogen Fitting 20 Watt with lamp, IP 65 Make: Philips or equal 20 Nos. SSE(E/M)/HBJ 17 98/07/2013/5282/1 45 Watt CFL Lamp based street light fitting comprising of single piece deep drawn

aluminium housing with acrylic cover including lamp similar to HPL model No. HPLCFLSTAL45 Make: Bajaj, CGL, GE, Osram, Philips, Surya, Sylvania, Havells, Anchor, Wipro, HPL or Equal.

30 Nos SSE(E/M)/HBJ

18 98/06/2012/5927/1 Prevailing torque type all metal hex nut M 16 x 2mm DIN 6925/980V property class 10 as per IS 1367, Make Unbrako, TVS or LPS

3200

Nos SSE(C&W)/HBJ

19 98/15/2013/5062/1 PRINTER CARTRIDGE REQUIRED FOR TRACK MACHINE ORGANISATION PGI-820- BLACK FOR PRINTER MODEL CANON IP 3680

16 Nos SSE/ZTMD/BPL

20 98/06/2013/5926/1 Prevailing torque type all metal hex nut M-20 x 2.5mm DIN 6925/980V property class 10, IS 1367, Make Unbrako, TVS or LPS

600 Nos SSE(C&W)/HBJ

21 98/07/2013/5091/1 Prime make or equal 300mm wafer type cast iron non return valve suitable for use in water pipe line

3 Nos SSE(E/M)/HBJ

22 98/07/2012/5685/1 Alternator suspension hanger pin for 4.5 KW alternator KEL part no. A 3131 RDSO Drg. no. SKEL 3943 AH no. 06 Make KEL. SIL, Prestech, Stasalit

35 Meter SSE/TL-AC/HBJ

23 98/07/2013/5105/1 3 Phase induction motor (blower motor) with rated voltage 415 +/- 10% rated current 1.81 amps, rated output 0.75 KW/1.0 H, 50 Hz, 1410 RPM, shaft dia 18.9mm, types S1, class H, lP -56, amb. Tem. 55* C, confirming to IS : 325 -1996 as per specification no. RDSO/PE/SPEC/AC/0089 9(Rev.0) with amendment no. 1&2 or latest, single ended shaft, required L.H. – 3 nos, RH – 3 Nos. equilent to LEEL part no. 10000016960 or CG make frame size ND 80 suitable for double décor LHB type RMPU of AC coaches (Proof of purchase from OEM along with test certificate/ reports to be submitted with supply Make LEEL, Crompton Greaves, Daulatram, Laxmi Hydraulics, Kapsons industries.

6 Nos SSE/TL-AC/HBJ

24 98/07/2013/5106/1 3 phase induction motor (condenser motor) with rated voltage 415 +/- 10% volts, 1.1kw/1.5 hp, rated current 2.5 amps, 1425 rpm, 50 Hz, duty S1, shaft dia 18.9 mm, insulation class H, protection lP -56, Amb temp. 45*c, confirming IS: 325-1996, as per specification n RDSO/PE/SPEC/AC/0089 (rev.0) with amendt no. 1&2 or latest. Leel part no. 10000016961 or LHP make frame size 90 L suitable for double décor LHB type RMPU AC coaches Make Leel, Daulatram, Crompton Greaves, Laxmi hydraulics Kapsons industries (proof of purchase from OEM along with test certificate/report is submitted when supplied.

6 Nos SSE/TL-AC/HBJ

25 98/07/2012/5655/1 Single phase emergency battery charger for LHB type coaches confirming to RCF specification no. EDTS – 163 – revision –C amendment – 1 or latest Make – Electro waves, Pyramid, HI-REL RCF/ICF approved supplier

2 Nos SSE/TL-AC/HBJ

26 98/06/2013/5287/1 Stainless steel (304) clamp for seviring mug in coach lavotery as per Drawing No. SSE/C&W/HBJ/27

1000

Nos SSE(C&W)/HBJ

27 98/06/2013/5288/1 Air freshner stick (Annexure attached) 125 Kgs SSE(C&W)/HBJ 28 98/06/2013/5289/1 Pillar cock 1/2" without wall flange as per model No. 5011 of jaquar or cardinal 50 Nos SSE(C&W)/HBJ 29 98/08/2013/5290/1 Supply of lead acid battery for TATA sumo 12 volt 80 AH, type-MHD-800, fully

charged 24 months replacement guarantee Make- Exide, AMCO or AMRON 1 No SSE(T/M)/HBJ

30 98/27/2013/5291/1 HP gear oil EP-90 (PIGL-4) or BPC- MAK spirod EP-90 or IoC servo gear HP-90 630 Ltrs SSE/TRD/NSZ/BPL 31 98/21/2013/5292/1 Supply of solder wire 60/40. Make- khosla, Bond, Eyre smelting. 5 Kgs SSE(Sig)/C/BPL

32 98/06/2013/5293/1 Laser jet printer all in one make canon, HP, EPSON or similar specification attached below

1 No ADME/BPL

33 98/06/2012/5928/1 Prevailing torque type all metal hex nut M-24x3 property grade 10 DM 6925/980 V property as per IS: 1367, Material supplied must be packed in std Make Unbrako, LPS, TVS, packing of 50 Nos. per box

600 Nos SSE(C&W)/HBJ

Conditions:-

1.Please send seprate quotation envelop for each case & quote case No.& Due date on the top of envelop.Firm Should quote rates in words and figure both.

2.Normal payment term is 100% against receipt note and offer with other payment terms are likly to passed over in general.

3. Conditional discount (for early payment,delivary at other than specified location etc.) will not be considered for determining inter-se-ranking.

4. Offer valid for less tha 60 days may be ignored, Whenever no validity is quoted, 60 days will be taken.

5. Give quotation for those items only for which the firm has registered.

6. Tender should quote the exact percentage of VAT that They will charging extra.

7. While quoting the rates, tenderer should pass on(by way of reduction in prices) the set off/input tax credit that would become available to them by switching over to the system of VAT from the existing system of sales tax,duty stating the quantum of such credit per unit of them quoted for.

8. The suppliers while claiming the payment will furnish following certificate to the paying authorities: " We hereby declare that additional set offs/input tax credit to the tune of Rs----- has accured and accordingly the same is being passed on to the purchaser and to that effect yhe payable amount may be adjusted".

9. For the state in which the VAT has not yet been introuduced, the existing system of sale tax shall continue.

10. 100% pament shall be made reciept and acceptance of material by consignee.

11.Divisional Material Manager Has full right to accept any tender complete or partialy withot assining any reasons. In this regard no correspodance shall be made.

For On behalf of the President of India Divl. Material Manager WCR Bhopal

Phone No 0755-4001594

Signature Of Firm With Stamp