BENCHTOP DRILL PRESSSmall and compact describes thisnew drill press from EURO TOOL.The base measures 6.75 x 6.75with a drill clearance of 5 inches.This drill has three settings thatallow for a range of 0-8500 RPM.When space is an issue, this drillpress will perform with ease. TheJacobs chuck accepts bits up to6.5mm. Canada safety approved.

DR300 .................................$79.95

WATCH WINDERSScientifically made watchwinders look great for theshop or even for home use.The outer box is made of high-ly polished wood, with a darklacquered finish. Window foreasy viewing, and a paddedlining on the inside so you’llnever scratch your watch.Cushions allows for large or regular size watches. State-of-the-art motorshave four options for spinning watches using the switch convenientlylocated under the lid. Best of all, the units can run on six “AA” batteries(not included) or an AC adapter (included). Your automatic watch neednever run down again, so no winding, date changing, etc.

WW351 Single Unit ..............................................................$97.95WW352 Double Unit ..........................................................$129.95

14325 23rd Ave NorthMinneapolis, MN 55447

T W I N C O

Twin City Supply

DIAMONDNITE DUAL TESTER• Test for non-diamond, synthetic Moissanite or genuine

diamond with one touch.• Initial warm-up time eight seconds; 1 second recovery time!• Completely portable, uses one nine-volt battery (included).• Three minute shut-off alert to save battery.• Simple on-off switch, no tricky adjustments.• Gray shock resistant housing with easy to read features.

DI650 .....................................................$229.00

Prices current as of June, 2015; all prices subject to change.

T W I N C O

952-545-2725 • Fax: 952-545-4715

800-328-6009 • Fax: 800-328-6001www.twincitysupply.net

e-mail: twincitysupply@msn.com

952-545-2725 • Fax: 952-545-4715

800-328-6009 • Fax: 800-328-6001www.twincitysupply.nete-mail: twincitysupply@msn.com

FLEXIBLE SHAFT MACHINEThis economical workhorse is faster than before and at alower price! At 1/4hp, this flexible shaft machine is perfectfor cleaning, polishing, sanding, drilling and much more.Fully interchangeable unit with standard style handpiece.Variable speeds up to 22,000RPM. Comes in durablehard case. 110V/60Hz.

MO150............................................................................$94.95

Great Products from EURO TOOL!

DRILL PRESS VISEThis handy aluminum Drill PressVise is great for use with ourTabletop Drill Press (DRL-300.00).Vise has slots for optional attach-ment to drill press base. Its quickrelease feature permits rapidopening and closure of the jaws oruse the handle to make smalleradjustments. Jaws are 2-9/16"wide (65mm) x 1-5/64" high(27mm). Maximum jaw opening is2-3/4" (70mm). Overall dimen-sions 9-1/2" long x 4-1/2" wide.

VS265.......................................................$12.95

Summer 2015, Vol 11 #4

Single or DoubleWatch Winders!

RING SIZER SETA complete set to accurately size rings. Be assured of giving your customers an accurate fit every time with this ring and finger gauge setwhich has been matched in graduated and full sizes from 1-15. Includes ametal ring stick with wood handle and 29 individual rings. Rings are 6.5mmwide with the finger size clearly marked on each. The ring stick is hollow,nickel plated, graduated in quarter sizes and includes a gauge for materiallength needed to make specific size rings. Set comes complete in a woodstorage box.

GA265.00....................................................$45.95

CASE CLOSER WITH ALUMINUM DIESThis combination casecloser/crystal press beatsanything in its price rangeand beyond. It features:• 14 reversible, turned

aluminum dies with 28 sizes, smoothed to a high polish so they will not scratch.

• Dies screw onto the upper and lower part so that they can be inverted for case closing or crystal fitting.

• Cast metal body with angled leverage arm for proper closure.Don’t destroy watch cases or case backs by using the wrong tool. OurCombo Closer will give you years of satisfaction and service.

CO908 .........................................................$54.45

LARGER WATCH?Set of six large aluminum dies to accommodate larger watches. Use with our CRY-908.00 combination case closer/crystal press. Set includes thefollowing size dies: 45-47mm, 50-53mm, 54-55mm, 56-57mm, 58-60mm, 62-64mm

CO908.60 ....................................................$44.00

952-545-2725 • Fax: 952-545-4715

800-328-6009 • Fax: 800-328-6001

www.twincitysupply.nete-mail: TwinCitySupply@msn.com

T W I N C O

DIAMOND CUTTING WHEEL FOR PLR-814.00This wheel is perfect for cutting hard metalsincluding titanium, stainless steel and platinum.3/4" diameter. Made in France.

PLR-814.75 ................................................$39.95

TEXTURING HAMMERwith NINE FACESThat’s correct...NINE tex-tures in ONE hammer!The patterns are endless;never before has a ham-mer been designed to doso much. Use the smalldesigns to pinpoint tex-ture in a certain area, thelarge designs to cover abigger area or use multiple tips to layer textures on one another. Each tipis easily and securely attached with a threaded collar. The tips are approx-imately 3/4" with various textures. Head weight with 2 tips approximately 8 oz. and overall length is 9-1/2".

HA470.00........................................................$47.00

Shop our website for over 2,900 items!www.TwinCitySupply.net

Follow us on Facebook!

DIGITAL GAUGE WITH STONE HOLDEROnly the EURO TOOL 9-1/4" digital caliper comes standard with a stoneholding plate attachment for easy measuring of loose stones, watch crystals, beads, etc. With the touch of a button, you can convert measurements from millimeters to inches and back. Accuracy to .01mm.The measuring system is a non-contact linear CAP with LCD display andan auto-off system to save the battery. Caliper will measure inside, outsideor depth and features a fine adjustment thumb wheel and zero set button.Comes in a protective nylon carrying case with foam padding and onespare battery. Maximum opening 6" (150mm).

GA 182........................................................$37.95

BENCHTOP POLISHERSmaller than a mouse pad is the best way toexplain this great new polisher! This Bench Polisherfrom EURO TOOL has pre-lubricated ball bearings anda dust-proof motor housing that makes it virtually maintenance free! The user will not sacrifice quality or speedwith this well balanced precision polisher, works with standard wheels and buffs up to 4". • Includes 2 tapered spindles, 2 medium abrasive wheels and

2 replacement motor brushes.• 110 volt, 1/6 HP motor.• Variable speed from 1,800 - 7,500 RPM

MO260......................................................$87.95

RING CUTTING PLIERThis tool is made to cut with a minimum of discomfort and effort. The blade is hardenedalloy and completely enclosed. Quality-made in

France. Length 4-1/2" (115mm).

PL33J..........................................................$39.95