PRODUCT OVERVIEWPV FLAT ROOF MOUNTING SYSTEMS

THEREVOlutionThe innovative PMT click-technologyfor fastest assembly of your PV flat roofmounting system – simple and precise.

2

...CLICK!Just...

Safety

Quickness

THEDECISION

Uncompromising quality ensures maximum efficiency.

The pillars of our quality.

Cheap systems are not always good systems as low prices necessarily require cost savings in material use and material quality. Long-term requirements with regard to safety must stand back. In the medium- and long-term period under review, this results in higher costs for maintenance and repair work. Our extremely stable mounting system forms the optimal basis for profit-yielding PV operation with regard to maximum overall economy consisting of system acquisition costs, mounting time and building security.

Opt for a high-performance mounting system of the brand PMT.

Convenient component parts for easy and safe handling during assembly

No measuring within the system required as all positions fall into place through defined and repetitive components

Simplest connection of component parts through innovative click-connections

Only one tool for middle clamp, end clamp, rear cover, cross braces and ballast braces

Statistical calculation of all system components

Component testing in the materials laboratory (non-destructive and destructive tests)

Wind tunnel tests incl. test certificate in boundary layer wind tunnels (Eurocode, ASCE 7-05, ASCE 7-10 and SEAOC PV 2-2012)

External interpretation and evaluation of wind tunnel results

Calculation of the complete system statics (Eurocode)

Load action areas of the complete system established under real-life conditions. No theoretical data of ballast distribution/ballast requirement through practical testing

Planning software implementation of all relevant data incl. external assessment and verification

4

EVOlutionECOlution

Klemmlänge 80 mm

330/lfm

8 mm

787/lfm434/lfm

1020 kWp/40 T2040 kWp/40 T 1640 kWp/40 T3080 kWp/40 T

597/lfm

11 mm

Über das BodenprofilÜber den Modulrahmen

Klemmlänge 40 mm

SIMPLY THE BEST

90°

Merkmale der Hochleistungs-Montagesysteme

150 mm 150 mm

Montagezeit

Auflagebreite

Auflagefläche Ø [cm2]

Bautenschutzmatte

Lastübertragung

Mittel- und Endklemme

Stabilität

Ballastwanne

Integrierte Kabelführung

4 in 1 Querstreben

Versandoptimiert

SOUTHEAST/WEST EAST/WEST SOUTH

t

Material

AntiWater-Technology

System Weight (Surface Weight)

Few Component Parts

Attack Angle

Roof Covering

SOUTH EAST/WEST

PMTEVOLUTIONThe uncompromising flat roof mounting system for photovoltaic large plants.

10°/15°

Only 5 component parts per system Only 4 component parts per system

Foil, bitumen, gravel, greening, sheet, concrete, open spaces

4.25 kg/m2 (10°), 4.50 kg/m2 (15°) 2.50 kg/m2 (10°), 2.75 kg/m2 (15°)

Aluminium EN-AW-6063-T3 and stainless steel A2-70

No frost damage as no formation of back-water within the complete system

PMT Ballast Pan

The PMT ballast pan was developed for optimal system ballasting of PV flat roof systems on gravelled or greened roofs with only low load reserves. The PMT ballast pan is inserted in EVOlution systems and filled with the existing bulk materials of the roof.

8

Detailed videos on the systemwww.pmt.solutions/en/fit-for-efficiency

Data sheets and assembly instructions on the systemwww.pmt.solutions/en/service-center/downloads

Interactive 3D system viewwww.pmt.solutions/en/products

4-in-1 Cross Braces

warrantyyears

Maximisation of the system stabilityNo shifting while doing other work such as pulling cables and laying modules

Fixed cable runs also in lateral directionBasis for optimal ballasting

4

t

Material

Drainage

System Weight (Surface Weight)

Few Component Parts

Attack Angle

Roof Covering

SOUTH EAST/WEST

PMTECOLUTIONGood value for money can be of premium-quality!The quality campaign against cheap flat roof systems.

10°/15°

Only 5 component parts per system Only 4 component parts per system

Foil, bitumen, gravel, greening, sheet, concrete, open spaces

3.0 kg/m2 (10°), 3.25 kg/m2 (15°) 1.25 kg/m2 (10°), 1.5 kg/m2 (15°)

Aluminium EN-AW-6063-T3 and stainless steel A2-70

Unhindered roof drainage according to DIN 1986-100

10

Detailed videos on the systemwww.pmt.solutions/en/fit-for-efficiency

Interactive 3D system viewwww.pmt.solutions/en/products

Maximisation of the system stabilityNo shifting while doing other work such as pulling cables and laying modules

Fixed cable runs also in lateral directionBasis for optimal ballasting

4-in-1 Cross Braces

Data sheets and assembly instructions on the systemwww.pmt.solutions/en/service-center/downloads

warrantyyears

4

Premium Mounting Technologies GmbH & Co. KGEnergiepark 1D-95365 Rugendorf, GermanyTel. +49 (0) 9223/945974 - 0Fax +49 (0) 9223/945974 - 44info@pmt.solutionswww.pmt.solutions

+49 (0) 9223/945 974 -0Further information: www.pmt.solutionsSubject to technical changes. 2015© Premium Mounting Technologies GmbH & Co. KG

Sale

sFol

der-

PMT-

EN-V

1

03/

2015

SERVICE HOTLINE

ww

w.r

evoc

it.d

e

Your Premium Mounting Technologies Sales Partner

The installation manual must be observed during assembly. This manual can be found under www.pmt.solutions/en/service-center/downloads or directly scan the QR code with your smart phone.(Requirements: Your mobile device must be equipped with an appropriate app)