model: aspt- g, w, lo & b

4
01 04/07 issue 181759 COFFEE TABLE MODEL: ASPT- G, W, LO & B ASSEMBLY INSTRUCTIONS Alphason Designs Limited Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK Tel: +44 (0)1942 885600 Fax: +44 (0)1942 876955 www.alphasondesigns.com Alphason Designs Ltd. accepts no liability for any damage caused through incorrect or inappropriate use of this coffee table. Please Note: Maximum load for the glass shelves is 70Kg each. This support must be assembled in accordance with these assembly instructions. IMPORTANT INFORMATION! 1) Before starting assembly please take time to familiarise yourself with the instructions and the components listed on the back page, as this product could be unstable if incorrectly installed. 2) Do not place hot or cold items against or in close proximity to any glass surface unless an adequately thick insulating material is used to prevent such items coming into contact with the glass. 3) Do not strike the glass with hard or pointed items. 4) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary; do not use washing powders or other substances containing abrasives as these may scratch the glass. 5) Do not sit or stand upon horizontal glass surfaces. 6) In order to maintain a high quality finish, when cleaning wooden panels please use a soft cloth with a suitable furniture polish if required. 7) Alphason Designs uses real wood veneers, consequently slight colour and pattern variation may occur and does not indicate a product defect. With natural wood, exposure to direct sunlight can produce colour change and should be avoided. Any slight change in colour over time does not indicate a product defect.

Upload: alphason-designs-ltd

Post on 26-Mar-2016

218 views

Category:

Documents


0 download

DESCRIPTION

Alphason Designs Limited Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK Tel: +44 (0)1942 885600 Fax: +44 (0)1942 876955

TRANSCRIPT

Page 1: MODEL: ASPT- G, W, LO & B

01 04/07issue 181759

COFFEE TABLEMODEL: ASPT- G, W, LO & B

ASSEMBLY INSTRUCTIONS

Alphason Designs LimitedAlphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UKTel: +44 (0)1942 885600Fax: +44 (0)1942 876955

www.alphasondesigns.com

Alphason Designs Ltd. accepts no liability for any damage caused through incorrect or inappropriate use of this coffee table.

Please Note:Maximum load for the glass shelves is 70Kg each.This support must be assembled in accordance with these assembly instructions.

IMPORTANT INFORMATION!1) Before starting assembly please take time to familiarise yourselfwith the instructions and the components listed on the back page,as this product could be unstable if incorrectly installed.2) Do not place hot or cold items against or in close proximity toany glass surface unless an adequately thick insulating material isused to prevent such items coming into contact with the glass.3) Do not strike the glass with hard or pointed items.4) When cleaning glass panels use a damp cloth or leather withwashing up liquid or soft soap if necessary; do not use washingpowders or other substances containing abrasives as these mayscratch the glass.5) Do not sit or stand upon horizontal glass surfaces.6) In order to maintain a high quality finish, when cleaningwooden panels please use a soft cloth with a suitable furniturepolish if required.7) Alphason Designs uses real wood veneers, consequently slightcolour and pattern variation may occur and does not indicate aproduct defect. With natural wood, exposure to direct sunlightcan produce colour change and should be avoided. Any slightchange in colour over time does not indicate a product defect.

Page 2: MODEL: ASPT- G, W, LO & B

Place second side panel onto support bars ensure the

chrome washers are correctly located into the holes in side

panel .

Attach remaining chrome washers , screws and cover

caps onto all four support bars.

STAGE 2

2.2.

3.3.

01 04/07issue 181759

STAGE 3

H

STAGE 1

Place one side panel on its bottom edge on a clean flat

surface to avoid any damage. Place chrome washers

either side of the side panel shown in Fig 1a. With

screw attach support bar .

Attach remaining 3 support bars to side panel in the same way.

EACH SUPPORT BAR HAS A FLAT FACE. ENSURE THE FLAT FACE IS FACING THE TOP OF THE UNIT AS SHOWN.

Fit all cover caps into screws and tighten by hand.

A

H

1.1.

GA

E A

E

G

Place side panel with the four support bars

attached flat onto a clean surface to avoid any damage.

Place four chrome washers on the ends of the four

support bars

A

G

A

H•

F

FLATFACE.

F H

TOPOFUNIT.

A EG

A

G

GH

G

A

F

A

E

1a.1a.

H

G

G

F

Page 3: MODEL: ASPT- G, W, LO & B

01 04/07issue 181759

5.5.

STAGE 4

4.4.

X12

Remove self adhesive clear buffer from

backing and carefully position three equally

along each rod on the flat face.

ENSURE ALL SUPPORT BARS FLAT FACES ARE FACING THE TOP EDGE AS SHOWN.

TOP OFUNIT

D

DD

C•

STAGE 5

Place carefully the glass shelves and onto support bars ensuring the glass shelves rest on clear buffers .

B

D

Congratulations your coffee table is complete!

B

Page 4: MODEL: ASPT- G, W, LO & B

DESCRIPTION QTY PACKED BY

2

1

1

COMPONENT

MODEL: ASPT- G, W, LO & BCERTIFICATE OF CONFORMITY

01 04/07issue 181759

A

B

16

SMALL TOP GLASS SHELF

LARGE BOTTOM GLASS SHELF

SIDE PANELS

202291

141146

WALNUT - 200312LIGHT OAK - 200311BLACK - 200310GLASS - 141145

SUPPORT BAR 4

CHROME WASHER

C

D

E

F

8

GLASS SCREW KIT -202289WOODEN SCREW KIT - 202293

SCREW

G

402905

COVER CAPS 8

202292

141147

H

12CLEAR BUFFER

202290

I ALLEN KEY 1