mineral water bottle or jar or pouch or all?
DESCRIPTION
This Article will Guide you which type of mineral Water Plant you should Start . ===> http://mineralwaterprojectinformation.org/article/bottle-jar-or-pouch-or-all/TRANSCRIPT
http://mineralwaterprojectinformation.org/
Bottle ? Jar? Or Pouch ? or All ?
So, Whenever you think of starting your own mineral water plant or taking a
distributorship . This will be the most obvious question. Which will come to your
mind….
Bottle ? Jar? Or Pouch ? or All ?
of course if you decide about distributorship , you won’t have much choice ; but if
you decide to promote your own brand, you will have to decide your product mix.
The Subject of product mix is already discussed here on this Article
(http://mineralwaterprojectinformation.org/article/bottle-jar-or-pouch-or-all/.)
However besides the market demand , there are certain other factors which may
influence your decision. Such as …
Now we shall review & compare mainly the following types of end packing with
respect to these factors.
[All of these plants will be considered of standard basic module of 2000 LPH Capacity.]
http://mineralwaterprojectinformation.org/
1. Investment Involved :
Comparison on the basis of “Investment Involved”
Sr No Description Investment in Lakhs
1. Bottle + Jar + Pouch Plant 55
2. 20 Ltr Jar 30
3. 200 ml Pouch 30
Source www.mineralwaterprojectinformation.org
The Bottle, Jar & Pouch Combined Plant needs the maximum investment , but
also has the maximum potential, as you combine all the popular products in your
mixes. If you want to start small & wish to capture an Offices or Factories segment,
“Jars” can be an excellent choice. And you can also start with small investment. Pouch
can be a very much small segment , but can be extremely targeted. The biggest
advantage of such a plant is its size, area required & ease of operating the machinery.
2. Profit Margin
Comparison on the basis of “Profit Margin”
Sr No Description Profit Margin in Percentage
1. Bottle + Jar + Pouch Plant 31 %
2. 20 Ltr Jar 57 %
3. 200 ml Pouch 34 %
Source www.mineralwaterprojectinformation.org
http://mineralwaterprojectinformation.org/
Profit Margin is the highest in Jars, obviously as there is literally very less
investment in consumables. The Jars are bought just once & recycled again & again.
But the number of jars sold is less. Also the Jar handling work involved.
Compared to that, Pouch & bottle does not have a repeat , re-working job.
So, again it depends upon your market-mix.
3. Space Required
Comparison on the Basis of “Space Required”
Sr No Description Space Require in Sqft
1. Bottle + Jar + Pouch Plant 3000 sqft
2. 20 Ltr Jar 2000 sqft
3. 200 ml Pouch 2000 sqft
Source www.mineralwaterprojectinformation.org
Yes, this can be a very important factor to consider, especially for cities like Mumbai,
where Space has highest cost.
4. Power Required
http://mineralwaterprojectinformation.org/
Comparison on the Basis of “Power Required”
Sr No Description Power required in hp
1. Bottle + Jar + Pouch Plant 63 hp
2. 20 Ltr Jar 15 hp
3. 200 ml Pouch 15 hp
Source www.mineralwaterprojectinformation.org
� The Bottle + Jar + Pouch Plant needs maximum Power due to the power needed
for Blowing Machine
� Blowing Machine alone needs around 40 HP out of the 63 HP needed.
� If you decide to buy bottles from outside source , it may reduce considerably ,
but the profit margins will drop as well.
From this Analysis you can decide which type of plant to start. However, the
market demand factor will be very important & crucial . If you want little more
information on the cost of production.
We also conduct an Online Training Course
http://mineralwaterprojectinformation.org/Course/ for Packaged Drinking Water ,
where we have 2 Special Training Videos in addition to the other content , which give
you the following training in detail :-
& other much more useful material
Needless to mention, we also do offer a FREE project Report for Packaged Drinking
Water , Please Download that. http://mineralwaterprojectinformation.org/preport/
*****