kg karting - test iso 5011:2000 - filtro hr22-d12 ......2013/03/15 · po_inc flow rate...

Commessa interna:Internal reference:

RichiedenteCustomer

Ente/Società (Dept/Firm): KG s.a.s. di Pierluigi Giacoletto & C. Sig. (Mr.): Davide Gaggianesi

Indirizzo (Address):Rapporto di prova inviato a:Report sent to:

Firma esecutore prove:Signature of test executor:

Firma Responsabile Laboratorio:Signature of Laboratory Manager:

Data ricevimento campioni:Date of test samples receipt:

Data esecuzione prove:Date of test execution:

Località esecuzione prove:Site of test execution:

Scopo delle prove:Purpose if test:

Norme/specifiche tecniche:Standard/Technical specifications:

Eventuali scostamenti, aggiunte o limitazioni:

Possible differences, additions or limitations:

Assembly: \Paper type: \

\

I risultati del presente rapporto di prova si riferiscono esclusivamente al campione sottoposto a prova.

The test results contained in this Test report relate to the tested samples only.E' ammessa la riproduzione integrale del presente Rapporto di prova da parte del Richiedente; la riproduzione parziale dev'essere autorizzata per iscritto dal Laboratorio.

The integral reproduction of the present Test report is allowed; the partial reproduction must be authorized in wrìting by the Laboratory.

KG KARTING - Test ISO 5011:2000 - Filtro HR22-d12 - Modello APE1 - Omologazione n°

3/SA/18 - Report n° 13/026 Data: 13/03/2013

\

2 Condizioni di prova:

Test conditions:vedere pag. n°3

689-13

1 Campioni / identificazione

Test unit / identification

1791-13

Davide Gaggianesi

ISO 5011:2000

13/03/2013

Massimo Ellena

Ivano Ottino

13/03/2013

Laboratorio Texa - Via S. Gribaudo 22/A 10036 Chivasso (To) - Italy

Texa code:

Filter element:The methods of sampling and transport of items are provided by the customer

KG s.a.s. di Pierluigi Giacoletto & C.Model/Type n°:Manufacturer:

Filtro HR22-d12 Modello APE1 - Omologazione n° 3/SA/18

Viale America, 1 - 10081 Castellamonte, (TO) ITALY

Validazione

Note of test method: /

LAB N° 1202

RP-026-13-KG Karting-Test according to ISO5011 filter HR22-d12.xls Pag.1/4

Applied method for Efficiency calculation:

A) Final filter method Efficiency

B) Direct method Efficiency

Sample mounted on test equipment

ESITO CONFORME: l'efficienza in massa finale 95,50% (o filtration

performance µ) è superiore al valore limite di accettabilità del 85% (µ ≥

85% è il requisito indicato al §8.8.4 Appendix 1 (I) del Reglement

d'Homologation CIK-FIA 2013)

The test equipment used is subjected to calibration plan according to Texa Quality System

Test system for ISO 5011- cod. ATT115

Pressure drop e Dust/Efficiency test vedere pag. n°3

4 Commenti generali:

General comments:

Ei=((mDi-(mFi-mFi-1))/mDi)*100 with

mDi=total dust fed; mFi=final filter weight; mFi-1=final filter weight at

the previous step

Ei=((mUi-mUi-1)/mDi)*100 with

mDi=total dust fed; mUi=filter under test final weight; mUi-1=filter

under test weight at the previous step

3 Risultati di prova:

Test results:


3/SA/18 - Report n° 13/026 Data: 13/03/2013

5 Impianto di prova:

Test equipment:

X

LAB N° 1202


126

7,70

22,0

55,0

975

84,0 53,0

Test air flow: steady: X 57,0

variable: Min Temperature [°C]: 21,5

Dust type: ISO12103-1 A4 COARSE Max Temperature [°C]: 22,5

Batch n.: 10465C 975

Dust supplier: 975

1,000 50,00

Max dust fed [g]: 6,0 Capacity (at test terminal condition) [g]: 5,70

4,26 54,26

\ 95,50

Applied method: Test terminal condition:

Air feed pressure: > 1bar Number of used dust injctors: 2

Max Dp increase[mbar]:

Pressure drop before dust [mbar]: Pressure drop after dust [mbar]:

Full-life Efficiency [%]:

direct weighting see max Dp increase

Initial Efficiency [%]:

Barometric pressure before test [mbar]:

Barometric pressure after test [mbar]:

PRESSURE DROP VS MASS OF DUST FED / EFFICIENCY

Min. Rel. Humidity [%]:

Max Rel. Humidity [%]:

Rated Air flow [m3/h] :

Barometric pressure [mbar]:

Max air flow [m3/h]:

PRESSURE DROP OF CLEAN FILTER - TEXA cod. 689-13


3/SA/18 - Report n° 13/026 Data: 13/03/2013

Max Dp static - Restriction [mbar]:

Dust concentration [g/m³]:

PTI

Temperature [°C]:

Rel. Humidity [%]:

Pressure drop vs. mass of dust fed and efficiency

6,0g; 95,50%

0

10

20

30

40

50

60

0 10 20 30 40 50 60

Mass of dust fed [g]

Pre

ssur

e dr

op [

mba

r]

90,0

91,0

92,0

93,0

94,0

95,0

96,0

97,0

98,0

99,0

100,0

Eff

icie

ncy

[%]

Static pressure drop of clean filter + housing

0

2

4

6

8

10

0 10 20 30 40 50 60 70 80 90 100 110 120 130

Air flow [m3/h]

Pre

ssur

e dr

op [

mba

r]

LAB N° 1202

Restriction

84 m3/h4,26 mbar restriction


Uncertainty extensive: 1,05 mbarCoverage factor K: 2

Confidence level: 95%

Evaluation conducted on: 20/5/11 report: inc dp 14-11_cod 264 procedure:

Uncertainty extensive: 2,7 gCoverage factor K: 2


Evaluation conducted on: 24/5/11 report: inc M 23-11_cod257 procedure:

Evaluation conducted on: 18/4/11 report: inc M 07-11_cod420 procedure:

Efficiency

Uncertainty extensive: see Table 1Dust fed [g] 6,0 \ \

Coverage factor K: 2 E [%] 95,50 \ \

Confidence level: 95% U(E) [%] 2,10 \ \

Punto 1 Punto 2 Punto 3

Uncertainty extensive: 3,0 m3/h Venturi: VT2 s/n V08-0081-2 cod.: 271

Coverage factor K: 2


Evaluation conducted on: 21/4/11 report: inc flow rate 09-11-cod 271procedure:

TemperatureUncertainty extensive: 0,2 °C



Evaluation conducted on: 19/5/11 report: inc T 12-11_cod262 procedure:PO_inc temp ISO5011-ed.01

Relative humidityUncertainty extensive: 0,7 %



Evaluation conducted on: 19/5/11 report: inc RH 11-11_cod262 procedure:


3/SA/18 - Report n° 13/026 Data: 13/03/2013

INCERTEZZA DI MISURA - MEASUREMENT UNCERTAINTY

PO_Inc flow rate ISO5011-ed01

Dust capacity

Tab

le 1

Differential pressure

PO_Inc uso bilance ISO5011-ed01

PO_inc pressure drop ISO5011-ed.01

Air flow rate

PO_Inc uso bilance ISO5011-ed01

PO_inc UR ISO5011-ed.01

LAB N° 1202


kg karting - test iso 5011:2000 - filtro hr22-d12 ......2013/03/15 · po_inc flow rate...

Documents