ims - ant hire...ims company company the company ims robotics gmbh have been working in the area of...
TRANSCRIPT
�
IMS
Com
panyCompany
The company ImS Robotics GmbH have been working in the area of modern environment techno-logy since 1992. We are specialized in developing, engineering and manufacturing robots for the sewer rehabilitation. The team of the ImS Corporate Group consists of more than 60 motivated employees.We work closely together with our customers and suppliers to take over the large knowledge and experience in our products.
Therefore, ideas become products. Knowledge becomes technology. and cooperation becomes success!
For us as a medium-sized company the close customer loyalty is very important. Together with our construction and development department we analyze the information we receive from our dealer and customer in the area of sewer rehabilitation and sewer inspection, to bring new or de-veloped devices onto the market and establish the products successfully.
Products
The development and manufacturing of our highly innovative products takes place exclusively in Germany. With approx. 40 sales and service partners in over 30 countries and more than 1000 sold robot systems, ImS Robotics belongs to the world market leader as supplier for robots in small pipe section. By the take-over of the company Umwelttechnik Jenni from Switzerland in summer 2014, ImS Robotics extended its product range by manufacturing and maintenance of UV curing systems. This well-rounded product portfolio offers our customers a high level of effectiveness and service.
on all our products we place particular value on the user-friendly handling and the best possible mobility of the equipment.
ServiceThe team of ImS Robotics consists of motivated and reliable employees, who always act in the sense of complete customer satisfaction. We assume the ongoing training of our customers in ser-vice and handling of our devices. our global service partners are at your disposal at any time.
Rental parkyou need our cutting robot technology only temporarily? you want to test the system be-fore any purchase decision has been made? Then it is possible to rent our equipment! over 100 rental devices are available for you all around the world! Contact us!
LIST oF ConTenTS
Company ....................................................................................................... 3
IMS InDooR InSTaLLaTIon ......................................................................... 4NANOeasy.........................................................................................................................4NANOlight........................................................................................................................4MIcROeasy.......................................................................................................................4MIcROlight.......................................................................................................................6MIcROlight.plus...............................................................................................................6MIcROautomatic.............................................................................................................6MIcROautomatic.plus.....................................................................................................8MIcROpremium.50.m./.70.m./.164.ft./.230.ft................................................................8
IMS InDooR InSTaLLaTIon aCCeSSoRIeS ............................................... 10MIcROcheck .............................................................................................................10MIcROcheck pro .......................................................................................................10Inspection device MIcROcam ..................................................................................10Rehab technology MIcROsan .................................................................................10NANOcam30 ............................................................................................................. 11Satellite bladder for NANOcam30 .......................................................................... 11
IMS maIn SeWeR - maInTenanCe anD ReHaBILITaTIon ....................... 12DRIVE 50 m / 100 m / 150 m / 164 ft / 328 ft and 492 ft ..........................................12DRIVElight 100 m / 150 m / 328 ft and 492 ft ..........................................................12TURBO ......................................................................................................................14MIDI ..........................................................................................................................14Rehabilitation system MULTISAN ..........................................................................16Satellite system STL ................................................................................................17Lateral preparation system .....................................................................................17
IMS UV-CURInG SySTemS ........................................................................... 18UV-FLEx ....................................................................................................................18UV-cOMPAcT ...........................................................................................................18
IMS HIGH-pReSSURe WaTeR TeCHnoLoGy ..............................................20cLEANERbasic ......................................................................................................... 20
aCCeSSoRIeS ...............................................................................................20Cutting tools ............................................................................................................21Vehicle installation ................................................................................................. 22Compressors ............................................................................................................ 23
IMS InDooR InSTaLLaTIon
� State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
NANOeasyDN 70 - 100 / �" - �"
• mobile cutting system for small pipes in the indoor installation
• excellent flexibility in pipe bends 90° (2 x 45° in Dn 70 possible)
• optionally with 15 m / 49 ft or 25 m / 82 ft supply hose package
• internal camera with permanent air cleaning
• manual control by movable steering wheel along the supply hose
• bracing bladder for vertical operation
• powerful air-operated cutting motor (also usable for stoneware and concrete)
0�1 02 000
NANOlightDN 7� - 12� / �" - �"
• mobile cutting system for small pipes in the indoor installation
• excellent flexibility in pipe bends (90° Dn 100 / 4”)
• 15 m supply hose package
• internal camera with permanent air cleaning
• comfortable cable remote control with joystick for rotation and lifting
• bracing bladder for vertical operation
• powerful air-operated cutting motor (also usable for stoneware and concrete)
0�2 01 000
MIcROeasyDN 80 - 1�0 / �" - 6"
• mobile cutting system for pipes in the indoor installation
• excellent flexibility in pipe bends (90° Dn 100 / 4”)
• manual control by movable steering wheel along the supply hose
• internal camera with permanent air cleaning
• bracing bladder for vertical operation
• powerful air-operated cutting motor (also usable for stoneware and concrete)
0�8 02 000
0�1 0� 000
IMS InDooR InSTaLLaTIon
6 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
7State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
options MIcROlight. . .. MIcROlight.plus
035 03 000 extension Dn 200 / 8”
035 04 000 extension Dn 250 / 10“
030 07 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
015 18 000 push rod 11 mm / 50 m / 164 ft
030 06 900 Inspection camera
036 08 900 Remodeling set mICRo light to mICRo automatic
options MIcROautomatic032 02 000 extension Dn 200 / 8 "
032 03 000 extension Dn 250 / 10 "
030 07 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
030 08 300 Hose extension 15 m / 49 ft
030 05 300 Hose extension 30 m / 98 ft
015 18 000 push rod 11 mm / 50 m / 164 ft
030 06 900 Inspection camera
MIcROlightDN 80 - 2�0 / �" - 10"
For starter• uncomplicated and mobile system for house connection and drainage lines
• also usable in vertical pipes
• can be upgraded to mICRo automatic at any time
• 30 m / 98 ft supply hose
• internal camera with permanent air cleaning
• powerful air-operated cutting motor (also usable for stoneware and concrete)
• practical remote control for all functions
0�1 08 000
MIcROautomaticDN 80 - 2�0 / �" - 10"
For professionals• uncomplicated and mobile system for house connection and drainage lines
• also usable in vertical pipes
• aUTomaTIC and manUaL feed, climbing and creeping function
• 30 m / 98 ft supply hose and 30 m / 98 ft extension possible
• internal camera with permanent air cleaning and additional water cleaning
• powerful air-operated cutting motor (also usable for stoneware and concrete)
• mobile and multifunctional usage for CUTTInG, InSpeCTIon, TIGHTneSS TeST
and SHoRT LInInG
0�� 0� 000
MIcROlight.plusDN 80 - 2�0 / �" - 10"
For ambitious• uncomplicated and mobile system for house connection and drainage lines• also usable in vertical pipes • pneumatic feed function equipped with an additional lifting unit• 30 m / 98 ft supply hose air • internal camera with permanent air cleaning and additional water cleaning• powerful air-operated cutting motor (also usable for stoneware and concrete)• practical remote control for all functions
0�1 10 000
IMS InDooR InSTaLLaTIon
8 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
Indo
or In
stal
lati
on
MIcROautomatic.plusDN 80 - 2�0 / �" - 10"
For specialists• efficient and economic cutting robot for house connection and drainage lines
• powerful air-operated cutting motor (also usable for stoneware and concrete)
• mobile and compact stainless steel chassis
• particular solid 50 m / 164 ft supply hose
• aUTomaTIC and manUaL feed, climbing and creeping function
• also usable in vertical pipes
• integrated colour camera with permanent air cleaning and additional water cleaning
• very precise control of the cutter by 2 joysticks
• different control units available
• mobile and multifunctional usage for CUTTInG, InSpeCTIon, TIGHTneSS TeST
and SHoRT LInInG
0�� 02 000
MIcROpremium.50.m./.70.m./.164.ft./.230.ftDN 80 - 2�0 / �" - 10"
For perfectionists• efficient and economic cutting robot of the newest control generation with
ToUCH-paneL and TaBLeT-pC for house connection and drainage lines
• powerful air-operated cutting motor (also usable for stoneware and concrete)
• mobile and compact stainless steel chassis
• particular solid supply hose up to 70 m / 230 ft
• aUTomaTIC and manUaL feed, climbing and creeping function
• also usable in vertical pipes
• integrated colour camera with permanent air cleaning and additional water cleaning
• very precise control of the cutter by 2 joysticks
• meter counter and data recording
• mobile and multifunctional usage for CUTTInG, InSpeCTIon, TIGHTneSS TeST
and SHoRT LInInG
0�2 0� 000
options MIcROautomatic.plus030 14 400 Control unit with case
016 54 060 Tablet pC
032 02 000 extension Dn 200 / 8"
032 03 000 extension Dn 250 / 10"
030 07 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
018 68 000 Vehicle installation kit
030 06 900 Inspection camera
options MIcROpremium032 02 000 extension Dn 200 / 8"
032 03 000 extension Dn 250 / 10 "
030 09 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
030 14 600 meter counter
018 68 000 Vehicle installation kit
016 50 500 Carrying strap ImS Touch control unit
030 06 900 Inspection camera
0�2 10 000 016 �� 060
10 Stand april 2016 - Änderungen vorbehalten. Katalog gewährt keinen Lieferumfang. Dieser richtet sich ausschließlich nach erteilter auftragsbestätigung10 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS InDooR InSTaLLaTIon aCCeSSoRIeS
IMS
Indo
or In
stal
lati
on a
cces
soie
res
11Stand april 2016 - Änderungen vorbehalten. Katalog gewährt keinen Lieferumfang. Dieser richtet sich ausschließlich nach erteilter auftragsbestätigung 11State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS
Indo
or In
stal
lati
on a
cces
soie
res
MIcROsanRehab technology
Inspection cameraMIcROcamDN 80 - 2�0 / �"- 10"
• colour camera with LeD-lighting for sewer inspection in combination with cutting robots of the mICRo series and the DRIVe series
• quick conversion
MIcROcheck (pro)DN 80 - 1�0 / � " - 6"
• reliable and selective leakage testing in house connection and drainage lines
• easy adaption to an existing mICRo system automatic/auto-matic plus and premium
• 2 colour cameras with LeD-lighting
• 2 controllable sealing plugs high operating convenience by additional turning and swivel movement (MIcROcheck pro)
1 system - � functions for MIcROautomatic • MIcROautomatic plus • MIcROpremium NANOcam30
DN �0 - 12� / 2" - �"
• bendable, flexible inspection camera
• flexibility in bends in Dn 50 / 2" up to
45° / pipe branch 50 / 50 / 45°
• colour camera with continuously adjustable LeD-lighting
• 30 m / 98 ft cable for pushing and pulling
• flexible operation by cable remote control
with joystick
0�� �� 000
Satellite bladder for NANOcam30• extension for an existing nanocam30 system
to use the camera in Dn 100 up to Dn 150 / 4"- 6"
• 30 m / 98 ft reinforced supply cable supports
as a push rod simultaneously
• 2 switches for inflation and deflation
of the satellite bladder with air
0�� �� 000
10
cutting
Tightness test
Inspection
Rehab technologyMIcROsanDN 100 - 1�0 / �" - 6"
• short lining for sectional repair
0�0 06 �00 0�� 0� 000
0�� 02 000
0�� 01 000
12 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS maIn SeWeR - maInTenanCe anD ReHaBILITaTIon
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
1�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
options DRIVElight030 15 400 Control unit with case
016 54 060 Tablet pC
030 10 600 Water equipment
030 11 600 automatic cable reel
030 09 600 meter counter
030 13 600 Hand crank
030 07 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
018 68 000 Vehicle installation kit
030 06 900 Inspection camera
DRIVE 50 m / 100 m / 150 m164 ft / 328 ft and 492 ftDN 1�0 - �00 / 6" - 16"
• very robust, mobile and self-propelled cutting robot system for small and
medium-sized main sewers with a cutter outside diameter of 120 mm / 4,7"
• high operating flexibility due to 3 degrees of freedom
• powerful air-operated cutting motor
• pressure rail for stability and traction in the sewer
• up to 150 m / 492 ft supply hose on manual or motorized cable reel
• turning and swivelling movement via joystick for precise operation
• integrated colour camera with air cleaning and water cleaning
• meter counter and data recording
• multifunctional usage for CUTTInG and InSpeCTIon
• attachment for system available
0�� 08 000
DRIVElight 100 m / 150 m328 ft and 492 ftDN 1�0 - �00 / 6" - 16"
• very robust and mobile cutting robot system
for small and medium-sized main sewers with a cutter outside
diameter of 125 mm / 4,9"
• powerful air-operated cutting motor
• up to 150 m / 492 ft supply hose on manual or motorized cable reel
• turning and swivelling movement via joystick for precise operation
• integrated colour camera with air cleaning and water cleaning
• meter counter and data recording
• manual insertion into the sewer by push rod
• flexibility in bends up to 45° in Dn 150 / 6”
020 2� 000
0�� 0� 000 0�� 10 000
020 2� 000
options DRIVE030 15 400 Control unit with case
016 540 60 Tablet pC
030 10 600 Water equipment
030 11 600 automatic cable reel
030 09 600 meter counter
030 13 600 Hand crank
036 09 000 extension up to Dn 400 / 16" (only valid for 50 m / 164 ft version)
030 07 400 extension 5 m / 16 ft for remote control
030 21 400 extension 10 m / 33 ft for remote control
006 34 010 Granulated wheel 90
006 34 011 Granulated wheel 140
006 34 015 Corundum wheel 90
006 34 012 Corundum wheel 140
018 68 000 Vehicle installation kit
034 30 000 Connection
030 06 900 Inspection camera
1� State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS maIn SeWeR - maInTenanCe anD ReHaBILITaTIon
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
1�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
TURBODN 200 - 600 / 8" - 2�"
• reliable and extremely powerful cutting robot for main sewer from Dn 200
up to Dn 600 / 8" up to 24"
• extremely powerful air-operated cutting motor
• very short conversion period by changing the nominal diameter up to Dn 400 / 16"
• highest operating flexibility due to 4 degrees of freedom (driving movement, turning/
swivelling of the cutting arm and swivelling of the cutting motor)
• pressure rail for highest stability and traction in the sewer
• up to 100 m / 328 ft supply hose on manual or motorized cable reel and 50 m / 164 ft
extension possible
• very precise control of the cutter by 2 dynamic joysticks
• removable swivel colour camera with wipers and water cleaning
• reversing sensor to prevent that the robot drives over its own supply hose
• combinable with rehabilitation system mULTISan and
• mobile system
• vehicle installation kit available
011 2� 000
options TURBO
011 19 000 extension set for circular sectionsDn 450 - 600 / 18" - 24"
011 23 000 extension set for egg-shaped sectionsDn 250 / 375 - 500 / 750 (10" / 12" - 20" / 0")
012 18 000 electrical swivel drive for cutting motor
012 19 000 Water equipment
014 53 000 motor driven cable reel
014 56 000 extension supply hose 50 m / 164 ft
016 47 000 Data recording with meter counter
011 30 000 Connection of TURBo to „Uhrig“ installation trolley
MIDIDN 1�0 - ��0 / 6" - 1�"
• cutting robot for main sewers from Dn 150
up to Dn 350 / 6" up to 14"
• powerful air-operated cutting motor
• turning and swivelling movement of the cutting head
with integrated colour camera and wipers
• pressure rail for highest stability and traction in the sewer
• combinable with rehabilitation system mULTISan
02� 0� 000
Satellite.system.. ........Lateral.preparation.system
011 24 000 Cutting robot Dn 200 - 400 / 8" - 16"
014 52 000 Cable reel 100 m / 328 ft
016 11 000 ImS-control unit
options MIDI
011 25 000 extension for egg-shaped sectionDn 250 / 375 - 300 / 450 (10" / 15" - 12" / 18"
16 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS maIn SeWeR - maInTenanCe anD ReHaBILITaTIon
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
17State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
ImS
mai
n se
wer
- m
aint
enan
ce a
nd
reha
bilit
atio
n
022 22 000 Winner of ISTT NO-DIG Award 2015
Rehabilitation system MULTISANDN 200 - 600 / 8" - 2�"
• suitable for rehabilitation of laterals/service connections, cracks, shards and joints
• two-component grouting material owns excellent adhesion properties on Inliner, stoneware and concrete
• rehabilitation by means of grouting also possible on wet surfaces in case of pressing ground water
• rehabilitation system is operated by ImS cutting robot carriage
• rehabilitation depth from 15 cm up to max. 30 cm/6" up to 12"
• reduction of hardening time during top-hat profile rehabilitation by switchable heating
010 �� 000
Application area:Top-hat profile rehabilitation, long version 2DN 2�0 - 600 / 10" - 2�"• for longer installation depth
Application area: Top-hat profile rehabilitation 1DN 200 - 600 / 8" - 2�"• also usable in egg-shaped sections
Dn 300 / 450 - Dn 500 / 750 - 12" / 18"- 20" / 30"
• flexible exit angles and diameters
Application area: Grouting �DN 2�0 - 600 / 10" - 2�"• also usable in case of ground water infiltration
• grouting of joints, cracks and shards
1 2 � �
Lateral preparation systemDN 200 - 600 / 8" - 2�"The “intelligent” connection of two cutting robot systems for preparation of laterals:• 6 degrees of freedom (driving and 5 turning/swivelling axes)
• operation from the main sewer Dn 200 up to Dn 600 / 8” up to 24”
• preparation of laterals from Dn 80 / 3”, up to 40 cm / 15 inch depth
• two cameras for observing the insertion and the cutting process
Satellite system STLMain sewers DN 200 - 600 / 8" - 2�"Laterals DN 100 - 1�0 / �" - 6"
Professional system for preparatoryrehabilitation work in laterals/serviceconnections from the main sewer
• 2 cutting robots - 1 system!
• for all preparatory rehabilitation work
of laterals/service connections
• insertion of the system from the main sewer,
only 1 manhole access required!
• enables the removal of deposits, roots or
other obstacles
• cutting and opening the laterals after rehabilitation
• inspection, high pressure flushing and short lining
• insertion into laterals Dn 100 - 150 / 4" - 6" possible
• the both cutting robot systems can be used
individually without any restriction
• individual connection to other carriages possible
18 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS UV-CURInG SySTemS
IMS
UV
-cur
ing
syst
ems
1�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS
UV
-cur
ing
syst
ems
UV-curing systems
Rehabilitation of damaged pipes with relining is a cost efficient and approved method within the trenchless pipe rehab technologies. UV-curing systems for glass fiber liners are becoming more and more popular, because of its remarkable benefits.
ImS Robotics as manufacturer for reliable pipe rehabilitation robots provides different UV-curing systems. Com-bining this equipment with our robot/cleaning and partial rehab systems, the professional pipe rehab operator may have a complete system for the daily usage on the jobsite. our UV-curing equipment is for mobile usage or can be integrated as permanently installed component in a complete lining truck system.
UV-FLExUV-FLExlight / UV-FLEx / UV-FLExplusDN 1�0 - 1000 / 6" - ��"
• mobile UV-curing systems for small and medium-sized main sewers
• light source chain for 6 - 8 UVa lamps 400 W
• 120 - 170 m / 394 - 558 ft hybrid curing cable
• machine control, data recording and data evaluation by pLC touch panel
• data transfer via WLan
• ImS UV-equipment camera with video amplifier board
UV-cOMPAcTUV-cOMPAcT / UV-cOMPAcTplusDN 1�0 - 1�00 / 6" - ��"• mobile UV-curing systems for small and medium-sized main sewers• light source chain for 6 - max. 12 UVa lamps 400 W• 120 - 170 m / 394 - 558 ft hybrid curing cable• control unit with case and comfortable pLC operation• complete documentation possible• ImS UV-equipment camera with video amplifier board
UV-FLExlight UV-FLEx UV-FLExplus
Range of application Dn 150 - 600 / 6" - 24" Dn 150 - 600 / 6" - 24" Dn 150 - 1000 / 6" - 39"
Ignition system in cable reel for 6 x 400 W for 8 x 400 W for 12 x 400 W
(extra switch cabinet at the top)
Light source 6 x 400 W 8 x 400 W 8 x 400 W
Cable length 120 m / 394 ft 170 m / 558 ft 170 m / 558 ft
Cable reelreel for max. 180 m curing cable • automatic cable guidance • manual clutch • manual
switches for emergency operation in case of pLC failure • hand crank for emergency operation• easily removable extension arm for system delivery on euro pallet
Camera ImS UV-equipment camera with video amplifier board
Control
Control unit with case and pLC operation • Tablet-pC for video recording • pLC software for UV-curing-projects safes protocol data on USB -Stick (incl. pressure tightness test
protocol) • includes a separate software for data evaluation and recording on external pC or Tablet pC
multilingual 4 languagesRemote service and data transmission WLan
Weight approx. 420 kg approx. 430 kg approx. 465 kg
Dimensions (L x W x H) 1160 x 740 x 1050 n/s
material Stainless steel, aluminum, GFRp
UV-cOMPAcT UV-cOMPAcTplus
Range of application Dn 150 - 1500 / 6" - 39" Dn 150 - 1500 / 6" - 39"
Ignition system in cable reel for 12 x 400 W and 8 x 1000 W for 12 x 400 W and 12 x 1000 W
Light source 8 x 400 W and 8 x 1000 W
Cable length 200 - 230 m / 656 - 755 ft
Cable reelreel for max. 230 m curing cable • automatic cable guidance • manual clutch •manual
switches for emergency operation in case of pLC failure • hand crank for emergency operationmeasurement of the tensile force with overload shutdown
Camera ImS UV-equipment camera withvideo amplifier board
Controlimpact-protected industrial pC • Software for machine measurement data acquisition and
analysis • Soft- and Hardware for transmission the picture of the curing camera • program for leak testing • Software module for determining of lamp survival
multilingual 8 languagesRemote service and data transmission GSm, WLan, Bluetooth
Weight approx. 1900 kg
Dimensions (L x W x H) n/s
material Stainless steel, aluminum, GFRp
100 0� 000 100 06 000 100 07 000
100 0� 000 100 0� 000
20 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS HIGH-pReSSURe WaTeR TeCHnoLoGy
Hig
h-p
ress
ure
wat
er t
echn
olog
y
21State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS aCCeSSoRIeS
IMS
Acc
esso
ries
cutting toolsSpecially formed cutting tools for different materials
The problemThe cutting tool obscures the view on the working area.
The solutionThe specially shaped cutting tool designed by IMS...
...provides a good view during the insertion. It becomes invisible once the cutting engine has been switched on and enables a perfect view at the cutting spot.
The exampleA rotating propeller becomes invisible.
20 State may 2016 – Subject to change. Catalogue does not grant scope of delivery. The scope of delivery is based exclusively on the order confirmation
IMS HIGH-pReSSURe WaTeR TeCHnoLoGy
21State may 2016 – Subject to change. Catalogue does not grant scope of delivery. The scope of delivery is based exclusively on the order confirmation
IMS aCCeSSoRIeS
060 000 02
cLEANERbasicDN 100 - 2�0 / �" - 10"
• removal of scale deposits, encrustations
and roots
• rotary-swivel drives, infinite rotation,
swivelling 45°
• nozzle carrier for pressure
up to 500 bar (optionally nozzle
carrier up to 1200 bar)
• colour camera with adjustable LeDs
and lens wiper
• easy handling and control
of the nozzle axis 120 - 1200 bar
• 80 m / 262 ft supply hose length
22 State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS aCCeSSoRIeS
IMS
Acc
esso
ries
2�State may 2016 – Subject to change. Catalogue does not grant scope of supply. The scope of supply is based exclusively on the order confirmation!
IMS
Acc
esso
ries
Compressor Kaeser m17• powerful screw compressor
• 15 bar / 1 m³
• fuel type: petrol
• electric starter
• with transport wheels and and fold-out drawbar
018 66 000
Compressor Kaeser m31• economic and robust screw compressor
• 10 bar / 2,6 m³
• fuel type: diesel
• electric starter
018 66 000
Vehicle installationSpace saving vehicle installation
The IMS vehicle installation set has been designed for space
saving transport of a whole robot unit and the modular construc-
tion has been oriented towards the individual requirements of
our customers.
The basic set 1 consists of a mounting for the cable drum and
the remote control for air and water. The additional electrical
chain winch module 2 extends the basic set with a chain winch
and an adjustable extension arm. a swivelling winch arm allows
for very easy insertion and removal of the robot into and from
the manhole.
The additional drawer module � is able to carry the different
robot systems, accessories, water and nitrogen equipment pro-
perly. Simultaneously the connections for water and air arepre-
mounted.
a separate control desk � is available which can either be moun-
ted at the rear of the mounting set or somewhere else in the ve-
hicle. The control desk provides additional power accesses and
internal power sockets. Water and air switches are pre-mounted.
Technical data• L x W x H = approx. 1800 x 810 x 1700 mm
• Weight approx. 190 kg
018 �8 000
Individual.vehicle.installations.on.request.
Vehicle installation
018 58 000 Vehicle installation kit (without mounting)
018 59 000 Frame with winch
018 60 000 Drawer for TURBO cutter
018 63 000 Controlling desk
018 65 000 Shelf for lateral repair system
1 2
� �
018 �� 000 018 60 000 018 6� 000
ImS Robotics GmbH · am Bauhof 6 · D - 01458 ottendorf-okrilla · Germany
phone: Sales +49 35205 53748 · Service +49 35205 889216 · Rental +49 35205 889219
Fax: +49 35205 53749 · e-mail: [email protected] · Web: www.ims-robotics.de