iccmrea’2014 in tunisia€™2014 in tunisia sousse, hotel el mouradi club: port el kantaoui,...

ICCMREA’2014 IN

TUNISIA Sousse, Hotel El Mouradi Club: Port El Kantaoui, Sousse.

(For any further information or assistance during

conference days, please call: Mob.21621008195.

of 12

ICCMREA’2014 International Conference on Composite Materials and

Renewable Energy Applications

22-24 January - Sousse, Tunisia

Venue: Hotel El Mouradi Club: Port El Kantaoui, Sousse, Tunisia;

Wednesday, January 22, 2014 (The first day of ICCMREA’2014)

Location No.1 Hotel El Mouradi Club Conferences Hall

07:30-09:00

Registration: Registration Desk at the Hotel’s main Entrance Hall

09:00-09:15

ICCMREA’2014 General Chairs’ Opening Speech

Prof. Habib Sammouda

09:15-10:00

Keynote Speaker

Prof. Bashir Suleiman Department of Applied Physics,

College of Sciences, University of Sharjah, UAE

Title: Thermal conduction in composite building materials Abstract:

The thermal conduction in ceramics, marbles and wood as part of building composite materials is of

increasing importance both in technological applications and in research. The thermal conductivity is

considered as the principle property that represents the heat conduction in this context. In this work,

we examine the difficulty of estimating the effective heat conductivity in composite solid building

materials with known volume fractions and thermal conductivities of the composites.. The measured

data at room temperature is compared with theoretical results from different theoretical models

including the Effective Medium Theory (EMT) Model. These models are used to characterize

macroscopic homogeneous and isotropic multiphase solid materials either by determining the bounds

for the effective thermal conductivity and/or estimating the overall conductivity of the random

multiphase mixture. Several compounds with wide range of effective conductivities have been

investigated, at room temperature. It turns out that EMT model is an interesting mathematical model

to estimate keff. This model is based on the existence of a statistically homogeneous medium that is

environs inclusions of different phases. According to our calculations for these kinds of samples, the

effective medium theory produced calculated results that agreed best with the measured conductivity

values.

of 12

10:00-10:30 Coffee Break

Location No.1

Session No.1 Track: Renewable Energy (RE)

Session Chairs: Prof. Bashir Suleiman

10:30-10:50 Meriem Benmeziane; Algeria; Title: Stratégies de commande en puissances d'une machine asynchrone à double

alimentation; Track: Renewable Energy; Paper No. EC-110.

10:50-11:10 Olatinwo Mufutau O; Nigeria; Title: Comparative Study of the Output of Amorphous Silicon Photovoltaic Solar

Cells when Receiving Direct and Diffused Radiations; Track: Renewable Energy; Paper No. EC-101.

11:10-11:30 Arfaoui Walid; Tunisia; Title: Numerical modelling of a solar chimney power plant; Track: Renewable Energy;

Paper No. EC-103.

11:30-11:50 Amina Abdessemed; Algeria; Title: thermal and optical properties of the absorber surface of a solar converter;

Track: Renewable Energy; Paper No. EC-105.

11:50-12:10 Raoudha Chaabane; Tunisia; Title: Transient Rayleigh-Bénard thermal convection with Radiation Heat Transfer

in Participating Media; Track: Renewable Energy; Paper No. EC-107.

Location No.2


Session Chairs: Prof. Moncef Derouich

10:30-10:50 Chuks Diji; Nigeria; Title: Renewable Energy Technology Deployment for National Development: Current

Trends and Challenges in Nigeria; Track: Renewable Energy; Paper No. EC-47.

10:50-11:10 ZongYu Gao; China; Title: Power Distribution Control Strategy of Wayside Supercapcitor Energy Storage

System for Urban Rail Transit Network; Track: Renewable Energy; Paper No. ED-21.

11:10-11:30 Rasool Heydari; Iran; Title: Uncertainty Mitigation and Maximizing Profit in Energy Market by Coordinated

Trade of Wind and Gas thermal Unit; Track: Renewable Energy; Paper No. ED-19.

11:30-11:50 Umair Iqbal; Pakistan; Title: Design, Fabrication and Analysis of Solar Parabolic Trough Collector for Steam

Engine; Track: Renewable Energy; Paper No. ED-17.

11:50-12:10 Kamel Echaieb; Tunisia; Title: DTC Control Strategy Of Photovoltaic Cooling System Of A Greenhouse; Track:

Renewable Energy; Paper No. ED-13.

12:10-12:30 Abhijit Vinayak Padgavhankar; India; Title: Digital Controller of DC-DC Converter for Solar Cell Module;

Track: Renewable Energy; Paper No. ED-12.

Location No.3

Session No.3 Track: Composite Materials (CM)

Session Chairs: Prof. Lotfi Beji

10:30-10:50 M. A. Djebbi; Tunisia; Title: Immobilization of LDh enzyme on Layered Double Hydroxides: Structural and

morphological modification; Track: Composite Materials; Paper No. EC-109.

10:50-11:10 Abdelhamid Chari; Algeria; Title: Pure and Al doped ZnO nano powders X-ray diffraction and Fourier Transform

Infrared analysis; Track: Composite Materials; Paper No. EC-108.

11:10-11:30 Adel Mahmoud; Iraq; Title: production of alumina nanoparticles (Al2O3) using pulsed laser ablation technique in

ethanol solution; Track: Composite Materials; Paper No. EC-106.

11:30-11:50 B.M Suleiman; United Arab Emirates; Title: Thermal conduction in composite building materials; Track:

Composite Materials; Paper No. EC-104.

11:50-12:10 Chaouki Bensalem; Algeria; Title: Elaboration et spectroscopie optique des matériaux céramiques dopés par

Europium et Gadolinium; Track: Composite Materials; Paper No. EC-96.

12:10-12:30 Abderrahmane Chaieb; Algeria; Title: Preparation and optical properties of CdSe /KCl nanocomposite material;

Track: Composite Materials; Paper No. EC-85.

Location No.4


Session Chairs: Prof. Mongi Ben Amara

10:30-10:50 Kamel Zemmour; Algeria; Title: Application de la théorie de la fonctionnelle de la densité (DFT) à l’étude de

nanostructures composites supraconductrices; Track: Composite Materials; Paper No. EC-74.

10:50-11:10 Abdelkebir Djamel; Algeria; Title: Studying the effect of average concentration the matrix in hardening

Aluminum-Zinc alloy; Track: Composite Materials; Paper No. EC-142.

11:10-11:30 Nor-Edine Kellati; Morocco; Title: measurement of the acoustic properties of the material cork; Track:


11:30-11:50 Imed Madhi; Tunisia; Title: Nanocomposite materials for NO2 detection; Track: Composite Materials; Paper No.

EC-137.

11:50-12:10 M.A Rahmoune; Algeria; Title: Effect of Ethyltriacetoxysilane of Alfa Fibre on the Mechanical, Thermal and

of 12

Morphological Properties of Pvc/Alfa Composite; Track: Composite Materials; Paper No. EC-133.

12:10-12:30 D. Ouadjaout; Algeria; Title: Simulation of Silicon Solidification by a Modified Bridgman Process; Track:


10:30-10:50 Amélie Coulbaut-Lazzarini; France; Title: Sustainable practices in intelligent buildings and Places. Track:

Combination of composite materials and Renewable Energy Applications; Paper No. EC-82.

10:50-11:10

Zied Braik; Tunisia; Title: Facile electrochemical synthesis of ZnO/ZnSe heterostructure nanowire arrays and

ZnSe nanoparticle arrays; Track: Combination of composite materials and Renewable Energy Applications; Paper

No. EC-60.

11:10-11:30

Ying Ren; China; Title: A study on the formation of the second-interface between Ni-P coating and AZ33

magnesium alloy substrate by means of in-situ SEM observation; Track: Combination of composite materials and

Renewable Energy Applications; Paper No. EC-128.

11:30-11:50 Helmy El-Zanfaly; Egypt; Title: Public Health Aspects of Methane and Algal Production from Poultry Waste;

Track: Combination of composite materials and Renewable Energy Applications; Paper No. EC-121.

11:50-12:10

Ouertani Rachid; Tunisia; Title: Preparing porous Silicon Powder using a Drop Wise Adding of the Oxidant in a

MAWCE Processing.; Track: Combination of composite materials and Renewable Energy Applications; Paper

No. EC-114.

12:10-12:30

Majid Masoudi; Iran, Islamic Republic of; Title: Optimization of catalyst regeneration LTSC; Track:

Combination of composite materials and Renewable Energy Applications; Paper No. EC-90.

Location No.6

Session No.6 Track: Bio Fuels Climatic and Environmental Issues (BFVEI)

Session Chairs: Prof. Abdelmajid Jemni

10:30-10:50 Yasmina Boukhchana; Tunisia; Title: A dynamic model for study and optimization of an irreversible solar

refrigerator; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-43.

10:50-11:10

Doumi M'Hamed; Algeria; Title: Commande par Logique Flou et Mode Glissant d'un Système Eolien à Base

d'une Génératrice Asynchrone à Double Alimentation; Track: Bio Fuels Climatic and Environmental Issues;

Paper No. EC-38.

11:10-11:30 Jemaa Mabrouki; Tunisia; Title: Energy and economic study of the production of ethanol from cheese whey;

Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-37.

11:30-11:50 Mansouri Rami; Tunisia; Title: Etude et analyse expérimentale d’une machine frigorifique à absorption-diffusion

solaire NH3-H2O-H2; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-30.

11:50-12:10 Mansouri Rami; Tunisia; Title: Propriétés thermodynamiques du mélange Eau-Ammoniac- Hydrogène.; Track:

Bio Fuels Climatic and Environmental Issues; Paper No. EC-29.

12:10-12:30

Bouchmel Mliki; Tunisia; Title: Large eddy simulation of compartment fire with gas combustible; Track: Bio

Fuels Climatic and Environmental Issues; Paper No. EC-27.

12:30-14:00 Lunch Break

Location No.1

Session No. 7 Track: Renewable Energy (RE)

Session Chairs: Prof. AmenAllah Guizani

14:00-14:20 Mahmoudi Assia; Tunisia; Title: Study of solar plane glass AF24VE2; Track: Renewable Energy; Paper No. EC-

136.

14:20-14:40 Fatou Ndiaye; Senegal; Title: Effects of climatic conditions on a polycritalline photovoltaic Module in Niger;


14:40-15:00 Khalil Lasfer; Tunisia; Title: Numerical Study of the Aspect Ratio Effects on the Stratification in Water Storage

Tanks; Track: Renewable Energy; Paper No. EC-75.

15:00-15:20 Maher Azaza; Tunisia; Title: DTC Control Strategy Of Photovoltaic Cooling System Of A Greenhouse; Track:

Renewable Energy; Paper No. EC-87.

15:20-15:40 R. Chargui; Tunisia; Title: Influence of the solar radiation and the control function in the coupling of a residential

house and a heat pump system; Track: Renewable Energy; Paper No. EC-88.

Mohamed Mehdi Oueslati; Tunisia; Title Numerical study of pitching wind turbine airfoils; Track: Renewable

Energy; Paper No. EC-140.

Location No.2


Session Chairs: Prof . Noureddine Boukadida

14:00-14:20 Safa Slouma; Tunisia; Title: Command and Control of a Fuel Cell emulator; Track: Renewable Energy; Paper

No. ED-11.

of 12

14:20-14:40 Safa Skouri; Tunisia; Title: Experimental study of two types of solar heat exchanger used to determine

concentrated solar energy in solar parabolic concentror; Track: Renewable Energy; Paper No. ED-10.

14:40-15:00 Jayme Milanezi; Brazil; Title: Energy Harvesting Photovoltaic System to Charge a Cell Phone in Indoor

Environments; Track: Renewable Energy; Paper No. ED-9.

15:00-15:20 Abdelaziz Nasr; Saudi Arabia; Title: Evaporation of water/ammonia binary liquid film; Track: Renewable

Energy; Paper No. ED-8.

15:20-15:40 Mark DeSantis; USA; Title: Big Data and Energy Markets: Key to efficient markets and lower prices; Track:


15:40-16:00

Umair Iqbal; Pakistan; Title: Design and Implementation of Dual Axis Dynamic Microcontroller Based Solar

Tracking System; Track: Renewable Energy; Paper No. ED-16.

Location No.3


Session Chairs: Prof. Abdel Ben Daly

14:00-14:20 A. Smida; Tunisia; Title: p-type porous GaAs (100) layers made by vapor phase etching (VE): AFM and MEB

imaging; Track: Composite Materials; Paper No. EC-131.

14:20-14:40 Sunghoon Kim; Korea, Republic of; Title: Preparation and Characterization of Green Composite Using

Biomimetic Modified Lignin - by poster; Track: Composite Materials; Paper No. EC-129.

14:40-15:00 Abderrahmane Chaieb; Algeria; Title: Preparation and nonlinear optical properties of CdSe /KCl nanocomposite

material; Track: Composite Materials; Paper No. EC-125.

15:00-15:20 Nesrine Harfouche; Algeria; Title: Synthese Heterocyclique et L’effet de L'acide Cloridrique sur

L’elecropolymerisation de L’emeraldine; Track: Composite Materials; Paper No. EC-124.

15:20-15:40 B. Necib; Algeria; Title: Modélisation et contrôle actif de la déformée d'une structure intelligente par des

éléments piézoélectriques; Track: Composite Materials; Paper No. EC-120.

15:40-16:00

Raja Lamloumi; Tunisia; Title: Comparative drying behavior of a clay material and a fiber-clay composite;

Track: Composite Materials; Paper No. EC-118.

Location No.4


Session Chairs: Prof. Larbi Sfaxi

14:00-14:20 Seif El Whibi; Tunisia; Title: Correlation between microstructure and optical, electrical properties of

hydrogenated silicon (SiH) deposited by (PECVD); Track: Composite Materials; Paper No. EC-116.

14:20-14:40 Abdelwaheb Trigui; France; Title: Evaluation of thermophysical and mechanical properties of LDPE/Wax as a

Shape-Stabilized Composite Phase Change Material; Track: Composite Materials; Paper No. EC-115.

14:40-15:00 Abdelhamid Chari; Algeria; Title: Pure and Al doped ZnO nano powders X-ray Diffraction and Fourier

Transform Infrared Analysis; Track: Composite Materials; Paper No. EC-113.

15:00-15:20 Nouha Jaafar; Tunisia; Title: Synthesis, Characterization and Applications of a New Nanohybrid Composite:

Nacrite/MgCl2.6H2O/Ethanol.; Track: Composite Materials; Paper No. EC-112.

15:20-15:40

Moez Salem; Tunisia; Title: Surface passivation of silicon wafers by porous silicon combined with an ultrathin

aluminium coating film; Track: Composite Materials; Paper No. EC-102.

Location No.5


Session Chairs: Prof. Afif El Cafsi

14:00-14:20 Hadhoum Loubna; Algeria; Title: Simulation and optimization of a hybrid photovoltaic panel; Track: Bio Fuels

Climatic and Environmental Issues; Paper No. EC-26.

14:20-14:40 Ahmed Al Ameri; France; Title: An Efficient Algorithm for Load Flow Solutions by Schur Complement and

Threshold Technique; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-23.

14:40-15:00

15:00-15:20 Kyoo Ho Kim; Korea, Republic of; Title: Effect of [Cu]/[In] ratio on structure and morphology of CuInSe2 thin

films; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-19.

15:20-15:40 Akkouche Naim; Algeria; Title: Experimental production of synthesis gas by pyrolysis of wood; Track: Bio Fuels


15:40-16:00

Riahi Zouhair; Tunisia; Title: Dynamic study of a coaxial burner: Particle Image Velocimetry Technology; Track:


Coffee Break

of 12

(End of the first day of ICCMREA’2014)

Thursday, January 23, 2014 (The second day of the ICCMREA’2014)

07:30-08:00

Registration

08:00-08:45

Keynote Speaker

Prof. Rachid Bennacer

Ecole Normale Supérieure de Cachan - France

Title: Coupling of composite materials with PV collectors to improve the

performance of solar sensors in the aim to establish a smart home system'

Abstract:

The coupling of composite materials and porous phase change with PV collectors to recover 80% of

energy lost by Joule effect , can improve the performance of solar sensors and if they are associated

with more electronic sensors mastery production energy consumption can establish a smart home

system.

Composites and porous materials are more and more applications in building and many industrial

sectors such as transport, aerospace as well as sports and recreation, thanks to new development

processes. The mechanical properties of composites depend on components but also methods used

elaborations

As an application we will be interested in the development of porous phase change materials MCP

where the energy storage by latent heat can be effective. Although the methods of preparation of MCP

in capsules or shell polymer or polymer support material, they lead to a reduction in thermal

conductivity due to their low coefficients of conductivity. Therefore, it is important to prepare a new

composite phase change with increased thermal conductivity and no leakage during the phase change.

The association of this material to PV cells on the glass facades of buildings or within the concrete

walls of the great collective or individual construction.

Location No.1


Session Chairs: Prof. Rachid Bennacer

09:00-09:20 Zahra Taif; Algeria; Title: A multiple-model (Takagi-Sugeno) based sensor fault detection and isolation approach

for a Solar Power Plant; Track: Renewable Energy; Paper No. EC-134.

09:20-09:40 Ghilen Najeh; Tunisia; Title: Experimental investigation of silica gel / water adsorption refrigeration systems;


09:40-10:00 Md. Abir Hasan; Bangladesh; Title: Seawater Desalination using Photovoltaic System; Track: Renewable

Energy; Paper No. EC-126.

10:00-10:20 Ahmed Rezrazi; Algeria; Title: Neural Network Approach for Modelling solar irradiance over overcast sky;


10:20-10:40 N. Hamdaoui; Tunisia; Title: Electrical transport properties of Ti/Pd/Au/n-InAlAs/InP Schottky barrier based on

Temperature dependent I-V measurements; Track: Renewable Energy; Paper No. EC-135.

Location No.2

Session No. 13 Track: Composite Materials (CM)

Session Chairs: Prof. Radhouane Chtourou

09:00-09:20 Salah Hamdi; Algeria; Title: Isothermal oxidation mechanism of titanium alloy Ti-6Al-4V; Track: Composite

Materials; Paper No. EC-99.

09:20-09:40 Chaouki Bensalem; Algeria; Title: Elaboration et spectroscopie optique des matériaux céramiques dopés par

Europium et Gadolinium; Track: Composite Materials; Paper No. EC-97.

of 12

09:40-10:00 Hanene Jamai; Tunisia; Title: Numerical study of the CdZnTe growth:the solidification process in vertical

Bridgman; Track: Composite Materials; Paper No. EC-95.

10:00-10:20 Saidi Khiari; Algeria; Title: Optical transitions of Pr3+ ions in LiYF4 crystal; Track: Composite Materials; Paper

No. EC-93.

10:20-10:40

Florian Ellert; Germany; Title: Major factors influencing tensile strength of repaired CFRP-samples; Track:


Location No.3


Session Chairs: Prof. Abdelaziz Bouazizi

09:00-09:20 Mouna Bouzitoun; Tunisia; Title: Effect of the carbone nanotube concentration on dielelectrical behavior of

(SWCNTs/PVDF) composites; Track: Composite Materials; Paper No. EC-57.

09:20-09:40 Ahmed Chellil; Algeria; Title: Numerical failure analysis of a woven carbon-epoxy composite plate; Track:


09:40-10:00 Samir Lecheb; Algeria; Title: Prediction fatigue life of wind turbine composite blade; Track: Composite


10:00-10:20 Hamed Mouna; Tunisia; Title: Flat plate thermal solar collector efficiency in transient behavior; Track:


10:20-10:40 Marwa Ammar; Tunisia; Title: Hydration performance of dioctahedral smectite saturated with Ba2+ and Cs+

cations: Quantitative XRD investigation; Track: Composite Materials; Paper No. EC-49.

10:40-11:00

Marwa Ammar; Tunisia; Title: Effect of Ionic Radius and Relative Humidity on the Hydration Performance of a

dioctahedral smectite exchanged with earth metals cations : X-ray diffraction Investigation; Track: Composite


Location No.4

Session No.15 Track: Combination of composite materials and Renewable Energy Applications (CCMREA)

Session Chairs:Prof. Slim. Zghal

09:00-09:20 Khadraoui Mounir; Tunisia; Title: Thermodynamic study of a viscoelastic fluid of two concentric cylinders;


09:20-09:40

Houda Ennaceri; Morocco; Title: Lotus Effect and Super-Hydrophobic Coatings for Concentrated Solar Power

Systems (CSP); Track: Combination of composite materials and Renewable Energy Applications; Paper No. EC-

76.

09:40-10:00 Helmy El-Zanfaly; Egypt; Title: Public Hwalth Aspects of Methane and Algal Production from Poultry Waste;


10:00-10:20 Faiza Mnasri; Tunisia; Title: Modeling of heat and mass transfer during the manufacture of panels based of wood

fibers; Track: Combination of composite materials and Renewable Energy Applications; Paper No. EC-61.

10:20-10:40

Fakher Laatar; Tunisia; Title: Correlation between microstructure and optical of the nc-Si embedded in the matrix

of porous anodic alumina; Track: Combination of composite materials and Renewable Energy Applications;

Paper No. EC-56.

Location No.5


Session Chairs: Prof. Mohamed Salah Belkhiria

09:00-09:20

Boukhriss Mokhless; Tunisia; Title: Effect of Operational Parameters on Solar Water Sensor plan in Plan

Transient applied for membrane distillation; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-

14.

09:20-09:40 Hadia Fridhi; Tunisia; Title: The effects of water vapor injection into the engine combustion chamber; Track: Bio

Fuels Climatic and Environmental Issues; Paper No. EC-13.

09:40-10:00 Abidi Sihem; Tunisia; Title: Efficiency of photovoltaic censor associated to exchanger of three cooling , Track:


10:00-10:20 Soo-Yong Cho; Korea, Republic of; Title: Design Method for Supersonic Nozzle Used in Organic Rankine

Cycle; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-10.

10:20-10:40

Imen Mejri; Tunisia; Title: Lattice Boltzmann simulation of MHD natural convection in a nanofluid-filled

enclosure with non-uniform heating on both side walls; Track: Bio Fuels Climatic and Environmental Issues;

Paper No. EC-9.


of 12

Location No.1

Posters’ Session

Session No.17 Tracks: Renewable Energy; Composite Materials; Active and Passive Health Monitoring;

Applications to building services; Bio Fuels Climatic and Environmental Issues;

Session Chairs: Prof. Mohamed El Ganaoui

11:00-11:10

PanelNo.1/Face1

Elassaad Jemii; Tunisia; Title: Photon flux calculation using a pencil-like gamma source; Track: Renewable

Energy; Paper No. EC-123.(Poster Presentation)

11:10-11:20

PanelNo.1/Face2

Elassaad Jemii; Tunisia; Title: Simulation of the dose rate usinga GEANT 4 code; Track: Renewable Energy;

Paper No. EC-122.(Poster Presentation)

11:20-11:30

Panel No.2/Face1

Harizi Afef; Tunisia; Title: Effects of substrates temperature on the structural and optical properties of

Sn4Sb6S13 thin films grown by thermal evaporation; Track: Renewable Energy; Paper No. EC-117. (Poster

Presentation)

12:30-11:40

Panel No.2/Face2

Amine Brayek; Tunisia; Title: Structural and optical characterizations of ZnS/ZnO core/shell nanowires grown on

ITO glass; Track: Renewable Energy; Paper No. EC-71. (Poster Presentation)

11:40-11:50

Panel No.3/Face1

Hassen Sbihi; Saudi Arabia; Title: Preparation and Characterization of Biodiesel from Camelus dromedaries

(Hachi) Fat; Track: Renewable Energy; Paper No. ED-3.(Poster Presentation)

11:50-12:00

Panel No.3/Face2

O. Assas; Algeria; Title: Use of the Artificial Neural Network and Meteorological Data for Predicting Daily

Global Solar Radiation in Djelfa, Algeria; Track: Renewable Energy; Paper No. EC-94. (Poster Presentation)

12:00-12:10

Panel No.4/Face1

Ahmed Zarroug; Tunisia; Title: Effect of combined gettering process and roughening surface on reflectivity of

boron doped c-Silicon; Track: Renewable Energy; Paper No. EC-98. (Poster Presentation)

12:10-12:20

Panel No.4/Face2

Rim Gharsallaoui; Tunisia; Title: ZnO/AlN/diamond layered structure for SAW devices with subsurface damage;

Track: Composite Materials; Paper No. EC-81. (Poster Presentation)

12:20-12:30

Panel No.5/Face1

Rim Gharsallaoui; Tunisia; Title: ZnO/AlN/diamond layered structure for SAW devices with subsurface damage;

Track: Composite Materials; Paper No. EC-81. (Poster Presentation)

12:30-12:40

Panel No.5/Face2

S. Ben Taieb; Tunisia; Title: Effect of calcinations temperature on morphology and structural properties of

anodized titanium dioxide nanotubes arrays; Track: Composite Materials; Paper No. EC-111. (Poster

Presentation)

12:40-12:50

Panel No.6/Face1

Afifa Riahi; Tunisia; Title: Heat transfer enhancement of nanofluid filled enclosure with a circular block using

different nanoparticles; Track: Active and Passive Health Monitoring; Paper No. EC-32.(Poster Presentation)

12:50-13:00

Panel No.6/Face2

Reda Fartas; Algeria; Title: Optical properties of Ho3+ ions doped CdF2 single crystals; Track: Active and

Passive Health Monitoring; Paper No. EC-44. (Poster Presentation)

13:00-13:10

Panel No.7/Face1

Imededdine Arbi Nehdi; Saudi Arabia; Title: Garden cress (Lepidium sativum Linn.) seed oil as a potential

feedstock for biodiesel production; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-21.(Poster

Presentation)

13:10-13:20

Panel No.7/Face2

Rabeb Bkakri; Tunisia; Title: Organic Bulk Heterojunctions Based on P3HT: Graphene Nanocomposites for

Photovoltaic Applications; Track: Applications to building services; Paper No. EC-45. (Poster Presentation)

Location No.2


Session Chairs: Prof. Rachida Sridi

11:00-11:20 R. Hammami; Tunisia; Title: Composite Nafion/ TiO2 nanotube proton conducting membranes for PEMFC:

synthesis and properties; Track: Composite Materials; Paper No. EC-83.

11:20-11:40 M. A. Djebbi; Tunisia; Title: Immobilization of LDh on Layered Double Hydroxides; Track: Composite


of 12

11:40-12:00 Sunghoon Kim; Republic of Korea; Title: Preparation and Characterization of Green Composite Using

Biomimetic Modified Lignin; Track: Composite Materials; Paper No. EC-78.

12:00-12:20

Shyan-Lung Chung; Taiwan; Title: Thermal conductivity of epoxy molding composite by self-synthesized AlN

The effect of filler particle size, oxygen content, filler content and surface treatment; Track: Composite Materials;

Paper No. EC-77.

12:20-12:40

Abdelhamid Chari; Algeria; Title: Preparation of ZnO nano powders by sol-gel method. Structural and ,Uv-

Visible absorption characterization; Track: Composite Materials; Paper No. EC-70.

Location No.3


Session Chairs:Prof. Ridha Ajjel

11:00-11:20 Ahlem Cherif; Tunisia; Title: The temperature dependence on the electrical properties of dysprosium oxide

deposited on p-Si substrate; Track: Composite Materials; Paper No. EC-68.

11:20-11:40 H. Saghrouni; Tunisia; Title: Temperature dependent electrical and dielectric properties of metal/Dy2O3/n-GaAs

(MOS) structure; Track: Composite Materials; Paper No. EC-66.

11:40-12:00 Louardi Remache; Algeria; Title: Porous silicon/PECVD SiOx and SiNx: H structures formed on the P+ substrate

for thin silicon solar cell; Track: Composite Materials; Paper No. EC-63.

12:00-12:20 Abdelouahab Rezaiguia; Algeria; Title: Homogenization of a Composite Multi-Girder Bridge Deck as an

Equivalent Orthotropic Plate; Track: Composite Materials; Paper No. EC-59.

12:20-12:40

Fatma Habbachi; Tunisia; Title: Study of transfer and flow in porous media in nonequilibrium; Track: Composite


Location No.4


Session Chairs: Prof. Mongi Seffen

11:00-11:20 Ahmed Mahmoudi; Tunisia; Title: Lattice Boltzmann simulation of MHD natural convection in a nanofluid-filled

cavity with linear temperature distribution; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-8.

11:20-11:40 Dekhani Nsaliwa; New Zealand; Title: Towards a holistic approach in reducing CO2 emissions with net zero

energy houses; Track: Bio Fuels Climatic and Environmental Issues; Paper No. EC-6.

11:40-12:00 Jemii Elassaad; Tunisia; Title: Photons flux calculation using a pencil-like gamma source; Track: Bio Fuels


12:00-12:20 Jemii Elassaad; Tunisia; Title: Simulation of the dose rate using a GEANT4 code; Track: Bio Fuels Climatic and

Environmental Issues; Paper No. EC-4.

12:20-12:40

Ali Muzaffar; India; Title: Alternative fuels “Need of the time”; Track: Bio Fuels Climatic and Environmental

Issues; Paper No. EC-2.

Location No.5

Session No.21 Track: Applications to Building Services (A2BS)

Session Chairs: Prof. Mustapha Majdoub

11:00-11:20 Fatiha Youcef Ettoumi; Algeria; Title: The solar energy applied for the radiocommunication; Track: Applications

to building services; Paper No. EC-3.

11:20-11:40 Ali Muzaffar; India; Title: Smart Grid: Moving Towards a Smarter Future; Track: Applications to building

services; Paper No. EC-1.

11:40-12:00 Ahmed Jemai; Tunisia; Title: Modeling and Nonlinear Dynamics of an Active Fiber Composite Energy Harvester

with Interdigitated Electrodes; Track: Applications to building services; Paper No. EC-39.

12:00-12:20

Mahmmoud Sayed Abd El-Sadek; Egypt; Title: Influence of the post-growth annealing on the optical properties

of GaInN0.02As0.98 double quantum wells grown on different GaAs substrate orientations; Track: Applications

to building services; Paper No. EC-35.

12:20-12:40 Mohamed Lachheb; Tunisia; Title: Analysis of differential scaning calorimetry data of the paraffin/graphite waste

composites for thermal energy storage; Track: Applications to building services; Paper No. EC-34.

13:00-14:30 Lunch Break

Location No.1


Session Chairs: Prof. Rachid Bennacer

14:30-14:50 Zitouni Brahim; Tunisia; Title: Prediction of soot in turbulent non-premixed flames; Track: Renewable Energy;

Paper No. EC-89.

14:50-15:10 Ahmed Tgarguifa; Morocco; Title: Valorisation des sous produits de l’industrie sucrière, en énergie renouvelable;


of 12

15:10-15:30 Hadjer Bounechba; Algeria; Title: A Study Of A Fuzzy Logic Controller For Photovoltaic System; Track:

Renewable Energy; Paper No. EC-73.

15:30-15:50 Hadjer Bounechba; Algeria; Title: Modeling and Simulation of Perturb and Observe MPPT Algorithm for PV

systems; Track: Renewable Energy; Paper No. EC-72.

15:50-16:10

Y. Al-Douri; Malaysia; Title: Nanomaterials & nanotechnology, Solar cells - Oral Structural, optical, electrical

and thermal properties of CdS/Si (100) nanostructures under temperature effect using sol-gel technique for solar

cells applications; Track: Renewable Energy; Paper No. EC-119.

16:10-16:30

Abbassi Mohamed Ammar; Tunisia; Title: Fire Dynamic Simulator (FDS) modelling and experimental results of

a biomass pyrolysis pilot plant with depollution of pyrolysis products; Track: Renewable Energy; Paper No. EC-

67.

Location No.2

Session No.23 Track: Applications to Building Services (A2BS)

Session Chairs: Prof. Salem Sghaier

14:30-14:50 Olfa Dhibi; Tunisia; Title: Charge carrier transport and recombination in inverted and regular solar cells with the

P3HT: PCBM blend film; Track: Applications to building services; Paper No. EC-33.

14:50-15:10 Dhekra Loubiri; Tunisia; Title: Effect of CdSe nanoparticles on thermal properties of poly (3-hexylthiophene);

Track: Applications to building services; Paper No. EC-31.

15:10-15:30 Seddik Larbi; Algeria; Title: Full potential linearized augmented plane wave calculations of structure, electronic

and thermodynamic properties of EuMgH4 complex; Track: Applications to building services; Paper No. EC-28.

15:30-15:50 Aymen Mannai; Tunisia; Title: Electrical and chemical behavior of Graphite/Polyaniline (G/PANI) composites

exposed to PEM fuel cell environment; Track: Applications to building services; Paper No. EC-24.

15:50-16:10 Nawel Kortas; Tunisia; Title: Energy consumption of SCTP, TCP, TCP-RENO within cloud computing; Track:

Applications to building services; Paper No. EC-17.

16:10-16:30 Dhekra Touzri; Tunisia; Title: Numerical study on melting characteristics of a paraffin wax as PCM: General

characterization; Track: Applications to building services; Paper No. EC-16.

16:30-16:50

Abdeen Mustafa Omer; United Kingdom; Title: Development and evaluation of a direct expansion heat pump

system; Track: Applications to building services; Paper No. EC-12.

Location No.3

Session No.24 Track: Active and Passive Health Monitoring (APHM)

Session Chairs:Prof. Imededdine Moussa

14:30-14:50

Malek Atyaoui; Tunisia; Title: Improvement in photovoltaic properties of silicon solar cells with a doped Porous

silicon layer with rare earth (Ce, La) as antireflection coatings; Track: Active and Passive Health Monitoring;

Paper No. EC-41.

14:50-15:10 Ilahi Soufiene; Tunisia; Title: Non-radiative recombination process in BGaAs/GaAs alloys: Two layer

photothermal deflection Model; Track: Active and Passive Health Monitoring; Paper No. EC-25.

15:10-15:30 Sangsik Park; Korea, Republic of; Title: Effect of breakdown voltage on sensitivity of the photo-transistor used in

an optical mouse; Track: Active and Passive Health Monitoring; Paper No. EC-20.

15:30-15:50

Aoyi Ochieng; South Africa; Title: Photodegradation of dye in the presence of metal ions using composite a

catalyst; Track: Active and Passive Health Monitoring; Paper No. EC-46.

15:50-16:10

Marouan Khalifa; Tunisia; Title: Purification of metallurgical-grade silicon powder via chemical attack by

hydrofluoric and nitric acids followed by thermal treatment; Track: Active and Passive Health Monitoring; Paper

No. EC-42.


of 12

Friday, January 24, 2014 (The third day of the ICCMREA’2014)

07:30-08:00

Registration

08:00-08:45

Keynote Speaker

Prof. Radhouane Chtourou

Research and Technology Centre of Energy (CRTEn)

Techno park Borj Cedria, Tunisia

Title: Low coast Nanomaterials for Renewable Energy and Environments Applications

Abstract:

The aim of this presentation is to give firstly some definitions of Nanomaterials and nanotechnologies

terms and to clarify their importance in many application domains. We will try to explain why when

the three dimensional material is reduced to two or one or zero dimensions these physical and

chemical properties are strongly modified. The second part of this talk, we will present the research

activities of our team on the developing of Nanomaterials for photovoltaic, photocatalytic and sensors

applications. The different techniques used for synthesizing these Nanomaterials like sol-gel,

iodization, nano-imprint and electro-deposition will be presented. And to finish this presentation, I will

give some results of research established by our research group as third generation photovoltaic cells,

nano-structured thin films for photocatalytic, photovoltaic, fuel cells and sensors applications.

Location No.1


Session Chairs: Prof. Moncef Derouich

09:00-09:20 Salwa Bouadila; Tunisia; Title: Solar energy storage application in Tunisian greenhouse by means of phase

change materials; Track: Renewable Energy; Paper No. EC-62.

09:20-09:40 Cherif Ould-Lahoucine; Algeria; Title: An Analytical Modeling of a Hybrid Photovoltaic/Thermal Collector;


09:40-10:00 Song Gao; China; Title: Charging and Inverter Algorithm Researches of PV System; Track: Renewable Energy;

Paper No. EC-51.

10:00-10:20 Djimli Samir; Algeria; Title: The Study of the Performance of the Solar Chimney Power Plant in the Region of

M’Sila, Algeria; Track: Renewable Energy; Paper No. EC-50.

10:20-10:40 M. Eswaramoorthy; India; Title: Composite Latent Heat Storage Materials for Solar Cooking Applications;


10:40-11:00 Daoudi Mahmoud; Tunisia; Title: The cosmic radiation effects on electronic devices based III-V semiconductor;

Track: Renewable Energy; Paper No. ED-5.

11:00-10:20 Abderrahmane Diaf; Algeria; Title: A Technical-Economical Study of the Solar Multiple Tray Distillator; Track:


11:20-11:40 Bashar Mudhaffar Abdullah; Malaysia; Title: Performance research of space heating system for sauna

applications; Track: Renewable Energy; Paper No. EC-100.

11:40-12:00 Md. Alamgir Hossain; Bangladesh; Title: Present Energy Scenario and Potentiality of Wind Energy in

Bangladesh; Track: Renewable Energy; Paper No. EC-91

Location No.2

Session No. 26 Track Composite Materials (CM)

Session Chairs: Prof. Ahmed Zakarya

09:00-09:20 Anatoliy Onanko;Ukraine; Title: Mechanical properties of composites with carbon nanotubes and automated

system of anisotropy analysis; Track: Composite Materials; Paper No. ED-20.

09:20-09:40 Chandula Samaranayake; Sri Lanka; Title: Determining the Criticality of Nuclear Reactors; Track: Composite

Materials; Paper No. ED-18.

09:40-10:00 Lawrence Chee; Turkey; Title: Synthesis of a high silicon content material and its use as raw material for new

insulating paint & material for the construction industry; Track: Composite Materials; Paper No. ED-14.

of 12

10:00-10:20 Hana Aljewifi; Libya; Title: Influence of hemp yarn impregnation on pull-out behaviour; Track: Composite

Materials; Paper No. ED-6.

Location No.3

Session No.27 Track: Combination of composite materials and Renewable Energy Applications (CCMREA)

Session Chairs: Prof. Nejmeddine Jaballah

09:00-09:20

Nadia Chehata; Tunisia; Title: Conducting polymer functionalized silicon nanowires nanocomposites: optical

properties and morphological characteristics; Track: Combination of composite materials and Renewable Energy

Applications; Paper No. EC-80.

09:20-09:40 Seraj Alfellah; Libya; Title: power flow control and oscillation damping using series FACTS devices; Track:

Combination of composite materials and Renewable Energy Applications; Paper No. ED-22.

09:40-10:00 Zhassulan Bayan; Kazakhstan; Title: Automated control system of township heat supply; Track: Combination of

composite materials and Renewable Energy Applications; Paper No. ED-15.

10:00-10:20 Himrane Nabil; Algeria;Title: Storage silos self ventilation; Track: Combination of composite materials and

Renewable Energy Applications; Paper No. ED-2.

10:20-10:40 Nawel Kortas; Tunisia; Title: Energy consumption of SCTP, TCP, TCP-RENO within cloud computing; Track:

Combination of composite materials and Renewable Energy Applications; Paper No. ED-1.

Location No.4

Session No.28 Track: Active and Passive Health Monitoring (APHM)

Session Chairs: Prof. Sami Jemni

09:00-09:20

Malek Atyaoui; Tunisia; Title: Improvement in photovoltaic properties of silicon solar cells with a doped Porous

silicon layer with rare earth (Ce, La) as antireflection coatings; Track: Active and Passive Health Monitoring;

Paper No. EC-41.

09:20-09:40 Othman Al-Khudairi; United Kingdom; Title: Characterisation of Fatigue Behaviour of GFRP Composite

Laminate for Wind Turbine Blade; Track: Active and Passive Health Monitoring; Paper No. EC-40.

09:40-10:00 H. Zrida; Sweden; Title: Non-crimp fabric composites stiffness measurement using FEM and application of

classical laminate theory; Track: Active and Passive Health Monitoring; Paper No. EC-36.

10:00-10:20 Zhiying Wang; Singapore; Title: Life Prediction of Composite Materials in Off-shore Application; Track: Active

and Passive Health Monitoring; Paper No. EC-22.

Location No.1

12:00-12:30

Coffee Break

(Discussion Circle and closing speech of the ICCMREA’2014)

iccmrea’2014 in tunisia€™2014 in tunisia sousse, hotel el mouradi club: port el kantaoui,...

Documents