hpe insight management wbem providers 10.40 for microsoft ...h20628. · windows® management...
TRANSCRIPT
HPE Insight Management WBEM Providers 10.40 for Microsoft Windows Data Sheet
Abstract
This document provides information about the classes and properties of HP Insight Management WBEM Providers.
Part Number: 844160-402
Published: March 2016
Edition: 1
For Hewlett Packard Enterprise and channel partner use.
2
Copyright 2016 Hewlett Packard Enterprise Development LP.
Notices
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use or copying. Consistent with FAR12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website.
Acknowledgments
Microsoft and Windows are registered trademarks of Microsoft group of companies.
HP Confidential
1 Overview
The HP Insight Management WBEM Providers supply system management data through the Windows Management Instrumentation (WMI) framework for HP ProLiant server platforms and options. These providers implement the profiles and data described in this document.
Use of the providers requires Windows Server 2008, and WMI.
HP Confidential
2 Base server
2-1 Overview The following profiles are implemented, and files are installed by this provider.
Table 2-1 87TOverview
Implemented Profiles HP Base Server Profile (P00105) HP Base Server Physical Asset Profile (P00114) DMTF Power State Management Profile (DSP1027) DMTF Software Inventory Profile (DSP1023)
Provider Installation Files HPWmiSys.dll HPWmiSysEvt.dll HPWmiSysEvtMsg.dll HPWmiSys.mof
2-2 Use cases For use cases, see the HP Base Server profile (P00105), HP Base Server Physical Asset profile (P00114), DMTF Power State Management Profile (DSP1027), and DMTF Software Inventory Profile (DSP1023).
2-3 Class implementations The following classes describe the base server implementation.
2-3-1 HP_WinComputerSystem HP_WinComputerSystem extends the class HP_ComputerSystem to model the base server. Only one instance of HP_WinComputerSystem is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-2 87TClass: HP_WinComputerSystem Properties
Property name Property implementation
17TCIM_ManagedElement
Caption Computer system DNS name returned by Windows API GetComputerSystemName()
Description Computer system DNS name returned by Windows API GetComputerSystemName()
HP Confidential
Table 2-2 87TClass: HP_WinComputerSystem Properties
ElementName Computer system DNS name returned by Windows API GetComputerSystemName()
17TCIM_ManagedSystemElement
OperationalStatus OperationalStatus[0] contains the computer system consolidated status and indicates the worst status of connected subsystems. OperationalStatus[0] contains one of the following: 0 (Unknown) 1 (Other) 2 (OK) 3 (Degraded) 6 (Error)
StatusDescriptions StatusDescriptions[0] contains one of the following corresponding to OperationalStatus[0]: One or more of the subsystems that make up this
computer system have an OperationalStatus value of Unknown.
One or more of the subsystems that make up this computer system have an OperationalStatus value of Other.
OK One or more of the subsystems that make up this
computer system have an OperationalStatus value of Degraded.
One or more of the subsystems that make up this computer system have an OperationalStatus value of Error.
HealthState 0 (Unknown) 5 (OK) 10 (Degraded/Warning) 20 (Major Failure)
17TCIM_LogicalElement
17TCIM_EnabledLogicalElement
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
EnabledDefault 2 (Enabled)
17TCIM_System
CreationClassName HP_WinComputerSystem
Roles Computer system roles string (writable property; persistent across reboots).
17TCIM_ComputerSystem
HP Confidential
Table 2-2 87TClass: HP_WinComputerSystem Properties
OtherIdentifyingInfo OtherIdentifyingInfo[0]: 93T93T where 93T93T is HP_ComputerSystemChassis.ProductID.
OtherIdentifyingInfo[1]: 93T93T where 93T93T is the computer system GUID string.
OtherIdentifyingInfo[2]: 93T93T:93T93T where 93T93T is the computer system model string and 93T93T is the computer system serial number string.
OtherIdentifyingInfo[3]: 93T93T where 93T93T is the computer system asset tag string.
OtherIdentifyingInfo[4]: 93T93T where 93T93T is the computer system chassis serial number.(This field will be valid only if System serial number is different from Chassis(Enclosure) serial number.)
IdentifyingDescriptions IdentifyingDescriptions[0]: HPQ:ProductID
IdentifyingDescriptions[1]: CIM:GUID
IdentifyingDescriptions[2]: CIM:Model:SerialNumber
IdentifyingDescriptions[3]: CIM:Tag
IdentifyingDescriptions[4]: HPQ: ChassisSerialNumber (This field will be valid only if System serial number is different from Chassis(Enclosure) serial number.)
Dedicated 0 (Not Dedicated)
17THP_ComputerSystem
Name Computer system DNS name returned by Windows API GetComputerSystemName()
NameFormat DNSName
PrimaryOwnerName Computer system primary owner name string; initialized to 33Tan empty string () 33T (writable property; persistent across reboots)
PrimaryOwnerContact Computer system primary owner contact string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots)
HP Confidential
Table 2-2 87TClass: HP_WinComputerSystem Properties
PrimaryOwnerPager Computer system primary owner pager string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots)
SecondaryOwnerContact Computer system secondary owner contact string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots)
SecondaryOwnerName Computer system secondary owner name string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots)
SecondaryOwnerPager Computer system secondary owner pager string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots)
Location Computer system location string; initialized to 74Tan empty string () 74T (writable property; persistent across reboots). It displays the physical location of the server.
LocationIndicator State of the computer system Unit Identifier (UID) LED (writable property): 0 (Unknown) 2 (On) 3 (Off) 5 (Alternating)
17THP_WinComputerSystem
Table 2-2-1 87TImplemented Method for HP_WinComputerSystem Class
Method name Method implementation
SendTestIndication Method parameters: TestIndicationID Input Parameter of Test Event to
generate 101 Informational Test Event 102 Warning Test Event 103 Critical Test Event
2-3-2 HP_ComputerSystemChassis HP_ComputerSystemChassis extends the class CIM_ComputerSystemChassis to model the physical system chassis. Only one instance of HP_ComputerSystemChassis is instantiated on a ProLiant server.
The following properties are implemented.
HP Confidential
Table 2-3 87TClass: HP_ComputerSystemChassis
Property name Property implementation
17TCIM_PhysicalElement
Tag Concatenation of serial number string and product ID string
CreationClassName HP_ComputerSystemChassis
ElementName Computer system product name (model) string
Manufacturer Computer manufacturer string
Model Computer system product name (model) string
SerialNumber Computer system serial number string
UserTracking Computer system asset tag string (read only property; persistent across reboots)
17TCIM_PhysicalPackage
RemovalConditions 2 (Not Applicable)
PackageType 3 (Chassis/Frame)
17TCIM_PhysicalFrame
17TCIM_Chassis
ChassisPackageType See MOF for definitions. This value is retrieved from SMBIOS.
RackMountable 0 (Unknown) 1 (True) 2 (False)
17THP_ComputerSystemChassis
ProductID Computer system product ID string (for example, 123456-123)
TPMModule Conditional property containing the installed and enabled state of the Trusted Platform Module:
2 (Absent) 3 (Present and Enabled) 4 (Present but Disabled) If the system does not have a TPM socket on the system board; this property will not be populated.
VirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
VirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
2-3-3 HP_ComputerSystemPackage HP_ComputerSystemPackage extends the class CIM_ComputerSystemPackage and associates instances of HP_ComputerSystem and HP_ComputerSystemChassis. Only one instance of HP_ComputerSystemPackage is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-4 87TClass: HP_ComputerSystemPackage
Property name Property implementation
17TCIM_Dependency
17TCIM_SystemPackaging
17TCIM_ComputerSystemPackage
PlatformGUID Computer system UUID value from SMBIOS
17THP_ComputerSystemPackage
Antecedent ref: HP_ComputerSystemChassis
Dependent ref: HP_ComputerSystem
2-3-4 HP_PowerManagementService HP_PowerManagementService extends the class CIM_PowerManagementService to model the server power management service. Only one instance of HP_PowerManagementService is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-5 87TClass: HP_PowerManagementService Properties
Property name Property implementation
17TCIM_ManagedElement
Caption Server Power Management Service
Description HP ProLiant Server Power Management Service
ElementName Server Power Management Service
17TCIM_ManagedSystemElement
OperationalStatus 2 (OK)
StatusDescriptions StatusDescriptions[0] contains the following corresponding to OperationalStatus[0]: 65TPower Management Service is OK
HealthState 5 (OK)
17TCIM_LogicalElement
17TCIM_EnabledLogicalElement
HP Confidential
Table 2-5 87TClass: HP_PowerManagementService Properties
Property name Property implementation
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
EnabledDefault 2 (Enabled)
17TCIM_Service
SystemName Computer system DNS name returned by Windows API GetComputerSystemName()
Started True
SystemCreationClassName HP_WinComputerSystem
Name Server Power Management Service
CreationClassName HP_PowerManagementService
17TCIM_PowerManagmentService
17THP_PowerManagmentService
Table 2-6 87TImplemented Methods for HP_PowerManagementService Class
Method name Method implementation
RequestPowerStateChange Method parameters: PowerStateInput parameter of the new power
state requested. Supported values are: Power On (2), Power Cycle Soft Off (5), Power Off Soft (8).
ManagedElementInput parameter with the reference to the HP_WinComputerSystem instance for the power state change.
The Time, Job and TimeoutPeriod parameters are not supported and should be zero or NULL.
For more information, see the DMTF Power State Management Profile (DSP01027).
2-3-5 HP_PowerManagementCapabilities HP_PowerManagementCapabilities extends the class CIM_PowerManagementCapabilities to model the server power management capabilities. Only one instance of HP_PowerManagementCapabilities is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-7 87TClass: HP_PowerManagementCapabilities Properties
Property name Property implementation
HP Confidential
Table 2-7 87TClass: HP_PowerManagementCapabilities Properties
Property name Property implementation
17TCIM_ManagedElement
Caption Power Management Capabilities
Description Power Management Capabilities
17TCIM_Capabilities
ElementName Power Capabilities 1
InstanceID Power Capabilities 1
17TCIM_PowerManagmentCapabilities
PowerCapabilities PowerCapabilities[0]: 3 (Power State Settable) PowerCapabilities[1]: 4 (Power Cycling Supported)
PowerChangeCapabilities PowerChangeCapabilities[0]: 3 (Power State Settable)
PowerChangeCapabilities[1]: 4 (Power Cycling Supported)
PowerStatesSupported PowerStatesSupported[0]: 2 (On) PowerStatesSupported[1]: 5 (Power Cycle (Off
Soft) ) PowerStatesSupported[2]: 8 (Off Soft)
17THP_PowerManagmentCapabilities
2-3-6 HP_AssociatedPowerManagementService HP_AssociatedPowerManagementService extends the class CIM_AssociatedPowerManagementService and associates the HP_ComputerSystem instance with the HP_PowerManagementService instance. Only one instance of HP_AssociatedPowerManagementService is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-8 87TClass: HP_AssociatedPowerManagementService
Property name Property implementation
17TCIM_ServiceAvailableToElement
17TCIM_ AssociatedPowerManagementService
PowerState 2 (On)
17THP_AssociatedPowerManagementService
ServiceProvided ref: HP_PowerManagementService
UserOfService ref: HP_ComputerSystem
HP Confidential
2-3-7 HP_PowerManagementElementCapabilities HP_PowerManagementElementCapabilities extends the class CIM_ElementCapabilities and associates the HP_PowerManagementService instance and the HP_PowerManagementCapabilities instance. Only one instance of HP_PowerManagementElementCapabilities is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-9 87TClass: HP_PowerManagementElementCapabilities
Property name Property implementation
17TCIM_ElementCapabilities
17THP_PowerManagementElementCapabilities
ManagedElement ref: HP_PowerManagementService
Capabilities ref: HP_PowerManagementCapabilities
2-3-8 HP_HostedPowerManagementService HP_HostedPowerManagementService extends the class CIM_HostedService and associates the HP_ComputerSystem instance and the HP_PowerManagementService instance. Only one instance of HP_HostedPowerManagementService is instantiated on a ProLiant server.
The following properties are implemented.
Table 2-10 87TClass: HP_HostedPowerManagementService
Property name Property implementation
17TCIM_Dependency
17TCIM_HostedDependency
17TCIM_HostedService
17THP_HostedPowerManagementService
Antecedent ref: HP_ComputerSystem
Dependent ref: HP_PowerManagementService
2-3-9 HP_SystemROMFirmware HP_SystemROMFirmware extends the class CIM_SoftwareIdentity to model the server system ROM BIOS.
The following properties are implemented.
Table 2-11 87TClass: HP_SystemROMFirmware
Property name Property implementation
HP Confidential
Table 2-11 87TClass: HP_SystemROMFirmware
Property name Property implementation
17TCIM_ManagedElement
Caption System ROM Firmware33T- 33T93T93T 93T() 93T, where 93T93T is the system ROM family code and 93T93T is either Active or Redundant Examples: System ROM Firmware-P31 (Active) System ROM Firmware-P31 (Redundant)
Description System ROM Firmware33T- 33T93T93T 93T() 93T, where 93T93T is the system ROM family code and 93T93T is either Active or Redundant Examples: System ROM Firmware-P31 (Active) System ROM Firmware-P31 (Redundant)
ElementName 93T93T, where 93T93T is the system ROM family code Example: P31
17TCIM_ManagedSystemElement
Name System ROM Firmware33T- 33T93T93T 93T() 93T, where 93T93T is the system ROM family code and 93T93T is either Active or Redundant Examples: System ROM Firmware-P31 (Active) System ROM Firmware-P31 (Redundant)
OperationalStatus 2 (OK)
StatusDescriptions StatusDescriptions[0] contains the following corresponding to OperationalStatus[0]: 65TSystem ROM Firmware Status: OK
HealthState 5 (OK)
17TCIM_LogicalElement
17TCIM_SoftwareIdentity
InstanceID HPQ:HP_SystemROMFirmware:93T93T, where 93T93T is 001 for the Active ROM or 002 for the Redundant ROM Examples: HPQ:HP_SystemROMFirmware:001 HPQ:HP_SystemROMFirmware:002
MajorVersion The firmware major version.
MinorVersion The firmware minor version.
VersionString 34TThe firmware version.
Manufacturer HPE/Hewlett Packard Enterprise
HP Confidential
Table 2-11 87TClass: HP_SystemROMFirmware
Property name Property implementation
Classifications 0 (Unknown) 10 (Firmware) 11 (Bios/FCode)
ClassificationDescriptions Description for HP_SystemRomFirmware.Classifications. Examples: Unknown Unified Extensible Firmware Interface(UEFI) System ROM Firmware
IdentityInfoValue HPQ:93T93T where 93T93T is the system ROM family code (for example, HPQ:P31).
IdentityInfoType CIM:SoftwareFamily
ReleaseDate 93TYYYYMMDD******.**********9 3T, where 93TYYYY93T is the four digit year of the release date, 93TMM 93T is the two digit month of the release date, and 93TDD93T is the two digit day.
17THP_SystemROMFirmware
2-3-10 HP_SystemROMElementFirmwareIdentity HP_SystemROMElementFirmwareIdentity extends the class CIM_ElementSoftwareIdentity and associates the HP_ComputerSystem instance and HP_SystemROMFirmware instances.
The following properties are implemented.
Table 2-12 87TClass: HP_SystemROMElementFirmwareIdentity
Property name Property implementation
17TCIM_Dependency
17TCIM_ElementSoftwareIdentity
UpgradeCondition 3 (Owner Upgradeable)
OtherUpgradeCondition (null string)
ElementSoftwareStatus Contains the following if the Antecedent refers to an instance of an Active ROM: ElementSoftwareStatus[0]: 6 (Installed) ElementSoftwareStatus[1]: 2 (Current)
Contains the following if the Antecedent refers to an instance of a Redundant ROM: ElementSoftwareStatus[0]: 6 (Installed) ElementSoftwareStatus[1]: 4 (Fallback)
17THP_SystemROMElementFirmwareIdentity
Antecedent ref: HP_SystemROMFirmware
HP Confidential
Table 2-12 87TClass: HP_SystemROMElementFirmwareIdentity
Property name Property implementation
Dependent ref: HP_ComputerSystem
2-3-11 HP_SystemROMInstalledFirmwareIdentity HP_SystemROMInstalledFirmwareIdentity extends the class CIM_InstalledSoftwareIdentity and associates the HP_ComputerSystem instance and an HP_SystemROMFirmware instance.
The following properties are implemented.
Table 2-13 87TClass: HP_SystemROMInstalledFirmwareIdentity
Property name Property implementation
17TCIM_InstalledSoftwareIdentity
17THP_SystemROMInstalledFirmwareIdentity
InstalledSoftware ref: HP_SystemROMFirmware
System ref: HP_ComputerSystem
2-3-12 HP_SystemXNCFirmware HP_SystemXNCFirmware extends the class CIM_SoftwareIdentity to model the DL980 server system specific XNC firmware elements.
The following properties are implemented.
Table 2-14 87TClass: HP_SystemXNCFirmware
Property name Property implementation
17TCIM_ManagedElement
HP Confidential
Table 2-14 87TClass: HP_SystemXNCFirmware
Property name Property implementation
Caption 93T93T Examples: SPI board cPLD firmware Main IO CPLD Firmware Upper CPU board CPLD Firmware Lower CPU board CPLD Firmware Upper FMP Firmware Lower FMP firmware Upper FPGA Firmware Lower FPGA Firmware Small form factor IO board cPLD Firmware PCIe subIO CPLD Firmware Combo PCIe/PCI-X SubIO CPLD Firmware Note: Either PCIe or Combo PCIe/PCI-X component instance will be available at a time on the server.
Description HP System XNC Firmware
ElementName 93T93T Examples: SPI board cPLD firmware Main IO CPLD Firmware Upper CPU board CPLD Firmware Lower CPU board CPLD Firmware Upper FMP Firmware Lower FMP firmware Upper FPGA Firmware Lower FPGA Firmware Small form factor IO board cPLD Firmware PCIe subIO CPLD Firmware Combo PCIe/PCI-X SubIO CPLD Firmware Note: Either PCIe or Combo PCIe/PCI-X component instance will be available at a time on the server.
17TCIM_ManagedSystemElement
Name XNC Firmware
17TCIM_LogicalElement
17TCIM_SoftwareIdentity
HP Confidential
Table 2-14 87TClass: HP_SystemXNCFirmware
Property name Property implementation
InstanceID HPQ: HP_SystemXNCFirmware:93T93T, where 93T93T is number assigned to the XNC firmware component Examples: HPQ: HP_SystemXNCFirmware:1 represents SPI
board cPLD firmware HPQ: HP_SystemXNCFirmware:2 represents Main
IO CPLD firmware HPQ: HP_SystemXNCFirmware:3 represents Upper
CPU board CPLD firmware HPQ: HP_SystemXNCFirmware:4 represents Lower
CPU board CPLD firmware HPQ: HP_SystemXNCFirmware:5 represents Upper
FMP firmware HPQ: HP_SystemXNCFirmware:6 represents Lower
FMP firmware HPQ: HP_SystemXNCFirmware:7 represents Upper
FPGA firmware HPQ: HP_SystemXNCFirmware:8 represents Lower
FPGA firmware HPQ: HP_SystemXNCFirmware:9 represents Small
form factor IO board cPLD firmware HPQ: HP_SystemXNCFirmware:10 represents PCIe
subIO CPLD (or) Combo PCIe/PCI-X SubIO CPLD firmware. Note: Either PCIe or Combo PCIe/PCI-X component instance will be available at a time on the server.
MajorVersion Major version number of the XNC firmware element
MinorVersion Minor version number of the XNC firmware element
VersionString Firmware version of the XNC firmware element
Manufacturer HPE
Classifications 10 (Firmware)
ClassificationDescriptions HP System XNC Firmware
HP Confidential
Table 2-14 87TClass: HP_SystemXNCFirmware
Property name Property implementation
IdentityInfoValue HPQ: Examples: HPQ: CPLD-P66-SPI HPQ: CPLD-P66-MAINIO HPQ: CPLD-P66-UPPERCPU HPQ: CPLD-P66-LOWERCPU HPQ: FMP-P66-UPPERXNC HPQ: FMP-P66-LOWERXNC HPQ: CPLD-P66-UPPERXNCFPGA HPQ: CPLD-P66-LOWERXNCFPGA HPQ: CPLD-P66-SFF HPQ: CPLD-P66-PCIEIO HPQ: CPLD-P66-PCIEXIO Note: Either PCIe or Combo PCIe/PCI-X component instance will be available at a time on the server.
17THP_SystemXNCFirmware
2-3-13 HP_ SystemXNCElementFirmwareIdentity HP_ SystemXNCElementFirmwareIdentity extends the class CIM_ElementSoftwareIdentity and associates the HP_ComputerSystem and HP_SystemXNCFirmware instances.
The following properties are implemented.
Table 2-15 87TClass: HP_SystemXNCElementFirmwareIdentity
Property name Property implementation
17TCIM_Dependency
17TCIM_ElementSoftwareIdentity
UpgradeCondition 3 (Owner Upgradeable)
ElementSoftwareStatus ElementSoftwareStatus[0]: 6 (Installed) ElementSoftwareStatus[1]: 2 (Current)
17THP_SystemXNCElementFirmwareIdentity
Antecedent ref: HP_SystemXNCFirmware
Dependent ref: HP_ComputerSystem
2-3-14 HP_SystemXNCInstalledFirmwareIdentity HP_SystemXNCInstalledFirmwareIdentity extends the class CIM_InstalledSoftwareIdentity and associates the HP_ComputerSystem instance and an HP_SystemXNCFirmware instance.
HP Confidential
The following properties are implemented.
Table 2-16 87TClass: HP_SystemXNCInstalledFirmwareIdentity
Property name Property implementation
17TCIM_InstalledSoftwareIdentity
17THP_SystemXNCInstalledFirmwareIdentity
InstalledSoftware ref: HP_SystemXNCFirmware
System ref: HP_ComputerSystem
2-4 Supported indications The following indications are implemented for ProLiant server platforms where available. System indications are described in the following tables.
2-4-1 ASR Reboot Occurred
Table 2-17 87THP_SystemHardwareIndication: ASR Reboot Occurred
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at indication
PerceivedSeverity 5 (Major)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system has rebooted from a Automatic Server Recovery (ASR) event
AlertingElementFormat 1 (Unknown)
AlertType 5 (Device Alert)
EventID 1
ProviderName HP Recovery
RecommendedActions Determine the nature of the ASR event and take corrective action.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary ASR reboot occurred
EventCategory 16 (System Power)
HP Confidential
Table 2-17 87THP_SystemHardwareIndication: ASR Reboot Occurred
Property name Property implementation
ProbableCause 111 (Timeout)
ProbableCauseDescription ASR Reboot Occurred
ProviderVersion Provider version generating the indication in the format, 93T...
NetworkAddresses A list of IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion Operating system version of the computer system generating the indication in the format, 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name, if one exists
RackUID * Rack Unique Identifier, if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
HP Confidential
Table 2-17 87THP_SystemHardwareIndication: ASR Reboot Occurred
Property name Property implementation
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-2 Thermal Reboot Occurred
Table 2-18 87THP_SystemHardwareIndication: Thermal Reboot Occurred
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at indication
PerceivedSeverity 5 (Major)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system has rebooted from a thermal shutdown event
AlertingElementFormat 1 (Unknown)
AlertType 5 (Device Alert)
EventID 2
ProviderName HP Recovery
RecommendedActions Ensure that the system is adequately ventilated. Check for proper room temperature and internal/external airflow. Add or repair fans and air baffling if necessary.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary Thermal reboot occurred
EventCategory 16 (System Power)
ProbableCause 51 (Temperature Unacceptable)
ProbableCauseDescription Thermal Reboot Occurred
HP Confidential
Table 2-18 87THP_SystemHardwareIndication: Thermal Reboot Occurred
Property name Property implementation
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion Operating system version of the computer system generating the indication in the format 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-18 87THP_SystemHardwareIndication: Thermal Reboot Occurred
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-3 POST Error Occurred
Table 2-19 87THP_SystemHardwareIndication: POST Error Occurred
Property name Property implementation
IndicationIdentifier GUID string generated at indication
PerceivedSeverity 5 (Major)
IndicationTime Time of indication
17TCIM_AlertIndication
Description Power-On-Self-Test errors occurred during the last system startup
AlertingElementFormat 1 (Unknown)
AlertType 5 (Device Alert)
EventID 1
ProviderName HP POST
RecommendedActions Check the Power-On Self-Test (POST) Errors, and take corrective action as needed.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary POST errors occurred
EventCategory 4 (System Hardware)
ProbableCause 8 (Configuration/Customization Error)
ProbableCauseDescription POST Errors Occurred
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
HP Confidential
Table 2-19 87THP_SystemHardwareIndication: POST Error Occurred
Property name Property implementation
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion Operating system version of the computer system generating the indication in the format, 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
VariableNames VariableNames[0]: POST Error Code VariableNames[1]: POST Error String
VariableTypes VariableTypes[0]: 3 (uint8) VariableTypes[1]: 1 (string)
VariableValues VariableValues[0]: The POST error code as specified by the system ROM
VariableValues[1]: The POST error string as specified by the system ROM
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3, (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
HP Confidential
Table 2-19 87THP_SystemHardwareIndication: POST Error Occurred
Property name Property implementation
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-4 WBEM Providers Started
Table 2-20 87THP_SystemHardwareIndication: WBEM Providers Started
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 2 (Informational)
IndicationTime Time of indication
17TCIM_AlertIndication
Description HP Insight Management WBEM Providers have started
AlertType 5 (Device Alert)
EventID 1
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP WBEM
RecommendedActions No action is recommended.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary WBEM Providers started
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription WBEM Providers Started
HP Confidential
Table 2-20 87THP_SystemHardwareIndication: WBEM Providers Started
Property name Property implementation
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-20 87THP_SystemHardwareIndication: WBEM Providers Started
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-5 DL980 System Providers started 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-21 87THP_SystemHardwareIndication: DL980 System Providers Started
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 2 (Informational)
IndicationTime Time of indication
17TCIM_AlertIndication
Description Reporting Entity: McHealthProvider Service Event Timestamp: Where is the date and time of the indication
AlertType 5 (Device Alert)
EventID 8001
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions No action is recommended.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary HP ProLiant DL980 System Providers have started
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
HP Confidential
Table 2-21 87THP_SystemHardwareIndication: DL980 System Providers Started
Property name Property implementation
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-21 87THP_SystemHardwareIndication: DL980 System Providers Started
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-6 DL980 System configuration (current 40-bit addressing mode) is not optimal
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-22 87THP_SystemHardwareIndication: DL980 System configuration (current 40-bit addressing mode) is not optimal
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system is not configured for optimal performance as its address mode is currently set to 40- bit instead of the Windows recommended 44-bit mode. In addition to the larger addressable physical address space, the 44-bit mode improves the system performance by generating less address decoding faults. Reporting Entity: McHealthProvider Service Event Timestamp: Where is the date and time of the indication
AlertType 5 (Device Alert)
EventID 8002
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
HP Confidential
Table 2-22 87THP_SystemHardwareIndication: DL980 System configuration (current 40-bit addressing mode) is not optimal
Property name Property implementation
RecommendedActions Restart system to invoke ROM-Based Setup Utility (RBSU) and select , , to change the Address Mode from 40-bit to 44-bit. \n\nNote: Before changing the address mode to 44-bit please ensure that the Microsoft QFE 980598 is installed on the system, if it has 1TB or more RAM.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary The system configuration should be changed for optimal performance.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
HP Confidential
Table 2-22 87THP_SystemHardwareIndication: DL980 System configuration (current 40-bit addressing mode) is not optimal
Property name Property implementation
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-7 DL980 System configuration (current 44-bit addressing mode) is not optimal
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-23 87THP_SystemHardwareIndication: DL980 System configuration (current 44-bit addressing mode) is not optimal
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system is not configured for optimal performance as its address mode is currently set to 44-bit instead of the Windows recommended 40-bit mode
AlertType 5 (Device Alert)
HP Confidential
Table 2-23 87THP_SystemHardwareIndication: DL980 System configuration (current 44-bit addressing mode) is not optimal
Property name Property implementation
EventID 8003
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Restart system to invoke ROM-Based Setup Utility (RBSU) and select , , to change the Address Mode from 44-bit to 40-bit
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary The system configuration should be changed for optimal performance.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
HP Confidential
Table 2-23 87THP_SystemHardwareIndication: DL980 System configuration (current 44-bit addressing mode) is not optimal
Property name Property implementation
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-8 DL980 Logical Processor configuration is not optimal 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-24 87THP_SystemHardwareIndication: DL980 Logical Processor configuration is not optimal
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
HP Confidential
Table 2-24 87THP_SystemHardwareIndication: DL980 Logical Processor configuration is not optimal
Property name Property implementation
Description The system does not have the logical processor configuration set for optimal performance. Either some logical processors are disabled, or processor groups are not set to optimal NUMA topology, or both.
AlertType 5 (Device Alert)
EventID 8007
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Invoke System Management Homepage (SMH) and click on the Logical Processor Information link under Advanced Server Health Information, then scroll down to select the Optimize System Configuration button. A cold boot will be needed for the final optimal configuration to take effect.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary The logical processor configuration should be changed for optimal performance.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
HP Confidential
Table 2-24 87THP_SystemHardwareIndication: DL980 Logical Processor configuration is not optimal
Property name Property implementation
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-9 DL980 System configuration (current x2APIC mode disabled) is not optimal
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-25 87THP_SystemHardwareIndication: DL980 System configuration (current x2APIC mode disabled) is not optimal
Property name Property implementation
17TCIM_Indication
HP Confidential
Table 2-25 87THP_SystemHardwareIndication: DL980 System configuration (current x2APIC mode disabled) is not optimal
Property name Property implementation
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system is not configured for optimal performance as its x2APIC mode is currently disabled. Enabling x2APIC allows better performance in the delivery and handling of interrupts, both in hardware and software, thus improving overall system performance.
AlertType 5 (Device Alert)
EventID 8010
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Invoke System Management Homepage (SMH) and click on the Advanced Server Settings link under Advanced Server Health Information, then scroll down to select the Optimize System Configuration button. A cold boot will be needed for the final optimal configuration to take effect. IMPORTANT NOTE for Windows 2008 R2: BEFORE enabling x2APIC mode, the Microsoft hotfix 2398906 (http//support.microsoft.com/kb/2398906) MUST be downloaded and installed in the system. This hotfix is not needed for systems running Windows 2008 R2 with Service Pack 1.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary Enable x2APIC mode for optimal system performance.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
HP Confidential
Table 2-25 87THP_SystemHardwareIndication: DL980 System configuration (current x2APIC mode disabled) is not optimal
Property name Property implementation
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-25 87THP_SystemHardwareIndication: DL980 System configuration (current x2APIC mode disabled) is not optimal
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-10 DL980 System Optimization Alert is disabled 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-26 87THP_SystemHardwareIndication: DL980 System Optimization Alert is disabled
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The user has disabled System Optimization Alert feature.
AlertType 5 (Device Alert)
EventID 8011
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions The System Optimization Alert feature has been disabled by user. Consequently, the DL980 System Providers no longer checks if the current system configuration is optimal. To re-enable this feature, go to SMH Advanced Server Settings or "Logical Processor Information" page and click the "Enable System Optimization Alert" button.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary System Optimization Alert is disabled.
EventCategory 1 (Other)
ProbableCause 1 (Other)
HP Confidential
Table 2-26 87THP_SystemHardwareIndication: DL980 System Optimization Alert is disabled
Property name Property implementation
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-26 87THP_SystemHardwareIndication: DL980 System Optimization Alert is disabled
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-11 DL980 System error has been detected 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-27 87THP_SystemHardwareIndication: DL980 System error has been detected
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system has encountered an error, resulting in an ELOG (Engineering Log) logged to the system at . The binary data has been captured to \Program Files\MCWBEM\Tools\Elog\.
AlertType 5 (Device Alert)
EventID 8012
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Contact HPE Support.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary System error has been detected .
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
HP Confidential
Table 2-27 87THP_SystemHardwareIndication: DL980 System error has been detected
Property name Property implementation
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
HP Confidential
Table 2-27 87THP_SystemHardwareIndication: DL980 System error has been detected
Property name Property implementation
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-12 DL980 System is missing one or more critical QFEs (Quick Fix Engineerings)
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-28 87THP_SystemHardwareIndication: DL980 System 87Tis missing one or more critical QFEs (Quick Fix Engineerings)
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description Need to update system with critical QFE %s.
AlertType 5 (Device Alert)
EventID 8013
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Invoke System Management Homepage (SMH) and click on the Critical QFE Information link under Advanced Server Health Information. Click each of the QFE Number with a yellow warning icon to go to Microsoft Support to download the missing QFE(s)
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary The system is missing one or more critical QFEs (Quick Fix Engineerings).
EventCategory 1 (Other)
ProbableCause 1 (Other)
HP Confidential
Table 2-28 87THP_SystemHardwareIndication: DL980 System 87Tis missing one or more critical QFEs (Quick Fix Engineerings)
Property name Property implementation
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
HP Confidential
Table 2-28 87THP_SystemHardwareIndication: DL980 System 87Tis missing one or more critical QFEs (Quick Fix Engineerings)
Property name Property implementation
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-13 DL980 System OS Power Plan settings are not optimal 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-29 87THP_SystemHardwareIndication: DL980 System 87TOS Power Plan settings are not optimal
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The HP Power Regulator Mode should be set to OS Control mode, and the Collaborative Power Control should be disabled. If the OS Power Plan is High Performance, the Minimum Processor Idle Power Core State should be set to No Cstate. If the OS Power Plan is Balanced, the Minimum Processor Idle Power Core State should be set to C1E state. If the Power Plan is Power Saver, the Minimum Processor Idle Power Core State should be set to C3 state. If the processor supports Package state, the Minimum Processor Idle Power Package State should be set to No Package state.
AlertType 5 (Device Alert)
EventID 8014
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
HP Confidential
Table 2-29 87THP_SystemHardwareIndication: DL980 System 87TOS Power Plan settings are not optimal
Property name Property implementation
RecommendedActions Invoke System Management Homepage (SMH) and click on the Advanced Server Health Information to select the Optimize System Configuration button. A cold boot will be needed for the final optimal configuration to take effect.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary OS Power Plan settings are not optimal.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
HP Confidential
Table 2-29 87THP_SystemHardwareIndication: DL980 System 87TOS Power Plan settings are not optimal
Property name Property implementation
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-14 DL980 Logical Processor configuration should be changed for optimal performance
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-30 87THP_SystemHardwareIndication: DL980 87TLogical Processor configuration should be changed for optimal performance
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system does not have the logical processor configuration set for optimal performance. Either some logical processors are disabled, or processor cores are not evenly enabled across sockets.
AlertType 5 (Device Alert)
HP Confidential
Table 2-30 87THP_SystemHardwareIndication: DL980 87TLogical Processor configuration should be changed for optimal performance
Property name Property implementation
EventID 8015
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Invoke System Management Homepage (SMH) and click on the Logical Processor Information link under Advanced Server Health Information, then scroll down to select the Optimize System Configuration button. A cold boot will be needed for the final optimal configuration to take effect.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary The logical processor configuration should be changed for optimal performance.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
HP Confidential
Table 2-30 87THP_SystemHardwareIndication: DL980 87TLogical Processor configuration should be changed for optimal performance
Property name Property implementation
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-15 DL980 Interrupt redirection mode should be set to physical destination mode
17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-31 87THP_SystemHardwareIndication: DL980 87TInterrupt redirection mode should be set to physical destination mode
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
IndicationTime Time of indication
17TCIM_AlertIndication
HP Confidential
Table 2-31 87THP_SystemHardwareIndication: DL980 87TInterrupt redirection mode should be set to physical destination mode
Property name Property implementation
Description When x2APIC is enabled on DL980 system, the interrupt redirection mode should be set to physical destination mode, which is not the default mode.
AlertType 5 (Device Alert)
EventID 8016
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Invoke System Management Homepage and click the Optimize System Configuration button on Advanced Server Settings page to change the interrupt redirection mode
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary Interrupt redirection mode should be set to physical destination mode.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
HP Confidential
Table 2-31 87THP_SystemHardwareIndication: DL980 87TInterrupt redirection mode should be set to physical destination mode
Property name Property implementation
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-16 DL980 System corrected error has been detected 17TNote:17T This indication is specific to DL980 servers. These events will not log messages in Windows Event log.
Table 2-32 87THP_SystemHardwareIndication: DL980 87TSystem corrected error has been detected
Property name Property implementation
17TCIM_Indication
IndicationIdentifier GUID string generated at the time of indication
PerceivedSeverity 3 (Degraded/Warning)
HP Confidential
Table 2-32 87THP_SystemHardwareIndication: DL980 87TSystem corrected error has been detected
Property name Property implementation
IndicationTime Time of indication
17TCIM_AlertIndication
Description The system has encountered a corrected error, resulting in an ELOG (Engineering Log) logged to the system at . The binary data has been captured to \Program Files\MCWBEM\Tools\Elog\.
AlertType 5 (Device Alert)
EventID 8017
EventTime Time of the event or time of the indication if event time unknown
ProviderName HP MCHealth
RecommendedActions Contact HPE Support, if there are multiple corrected errors reported within a short period of time.
SystemName HP_ComputerSystem.Name
SystemCreationClassName HP_ComputerSystem.CreationClassName
17THP_AlertIndication
Summary System corrected error has been detected.
EventCategory 1 (Other)
ProbableCause 1 (Other)
ProbableCauseDescription
ProviderVersion Provider version generating the indication in the format, ...
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion The operating system version of the computer system generating the indication in the following format: 93T..
SystemFirmwareVersion Firmware version of the computer system generating the indication
HP Confidential
Table 2-32 87THP_SystemHardwareIndication: DL980 87TSystem corrected error has been detected
Property name Property implementation
SystemSerialNumber Serial number of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemModel Model name of the computer system generating the indication
SystemGUID Platform GUID of the computer system generating the indication
ImpactedDomain 3 (Enclosure) for c-Class BladeSystems 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format v..
2-4-17 Threshold Indication - Average CPU Utilization Warning Threshold Exceeded
Table 2-15 HP_ThresholdIndication: Average CPU Utilization Warning threshold exceeded
Property name Property implementation CIM_Indication
IndicationIdentifier GUID string generated at indication PerceivedSeverity 3 (Degraded/Warning) IndicationTime Time of indication
CIM_AlertIndication Description The Average CPU utilization Warning threshold has
HP Confidential
exceeded for CPU :(CPU Name) AlertingElementFormat 1 (Unknown) AlertType 1 0x1 (Other) EventID 2 ProviderName HP CPU Threshold RecommendedActions None SystemName HP_ComputerSystem.Name SystemCreationClassName HP_ComputerSystem.CreationClassName ProbableCause 1 0x1 (Other) ProbableCauseDescription CPU Warning threshold exceeded SystemFirmwareVersion Firmware version of the computer system generating
the indication SystemGUID Platform GUID of the computer system generating the
indication ImpactedDomain 3 (Enclosure) for c-Class BladeSystems
4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0] BladeName * HP_ComputerSystem.Name EnclosureName * HP_BladeEnclosureCS.Name RackName * Rack name if one exists RackUID * Rack Unique Identifier if one exists SystemVirtualSerialNumber Conditional property containing the virtual system
serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
UCIM_ThresholdIndication
ThresholdValue A string holding the current value of the warning threshold
ObservedValue A string holding the current reading value that exceeds the threshold
UHP_ThresholdIndication
EventCategory 106 0x6a (System)
NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication
OSType
For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion Operating system version of the computer system generating the indication in the format
HP Confidential
..
ProviderVersion Provider version generating the indication in the format, ...
Summary CPU Warning threshold exceeded
SystemModel Model name of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemSerialNumber Serial number of the computer system generating the indication
UHP_CPUThresholdIndication
2-4-18 Threshold Indication -Average CPU Utilization Critical Threshold Exceeded
Table 2-15 HP_ThresholdIndication: Average CPU Utilization critical threshold exceeded
Property name Property implementation CIM_Indication
IndicationIdentifier GUID string generated at indication PerceivedSeverity 5 (Major) IndicationTime Time of indication
CIM_AlertIndication Description The Average CPU utilization critical threshold has
exceeded for CPU :(CPU Name) AlertingElementFormat 1 (Unknown) AlertType 1 0x1 (Other) EventID 1 ProviderName HP CPU Threshold RecommendedActions None SystemName HP_ComputerSystem.Name SystemCreationClassName HP_ComputerSystem.CreationClassName ProbableCause 1 0x1 (Other) ProbableCauseDescription CPU critical threshold exceeded SystemFirmwareVersion Firmware version of the computer system generating
the indication SystemGUID Platform GUID of the computer system generating the
indication ImpactedDomain 3 (Enclosure) for c-Class BladeSystems
4 (System) for all other systems
HP Confidential
When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0] BladeName * HP_ComputerSystem.Name EnclosureName * HP_BladeEnclosureCS.Name RackName * Rack name if one exists RackUID * Rack Unique Identifier if one exists SystemVirtualSerialNumber Conditional property containing the virtual system
serial number string when running in a Virtual Connect environment
SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment
UCIM_ThresholdIndication
ThresholdValue A string holding the current value of the critical threshold
ObservedValue A string holding the current reading value that exceeds the threshold
UHP_ThresholdIndication EventCategory 106 0x6a (System) NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6)
of the computer system generating the indication
OSType
For Windows 2003 32-bit: 69 For Windows 2003 64-bit: 70 For Windows 2008 32-bit: 76 For Windows 2008 64-bit: 77 For Windows 2008 R2: 103 For Windows 2012: 113 For Windows 2012 R2 : 116 For Windows vNext : 117
OSVersion Operating system version of the computer system generating the indication in the format ..
ProviderVersion Provider version generating the indication in the format, ...
Summary CPU Warning threshold exceeded
SystemModel Model name of the computer system generating the indication
SystemProductID Product ID of the computer system generating the indication
SystemSerialNumber S