hpe insight management wbem providers for hp ...h20628.hpe insight management wbem providers for hp...

HPE Insight Management WBEM Providers for HP integrated VMware vSphere 5.5 U3 April 2016 Datasheets

Document Type

Smart Array View Class Data Sheet

1. Overview The HPE Smart Array View Class data sheet describes host based Smart Array HBA’s and the attached devices. Note that current View Class implementation does not support externally attached Smart Array based MSA devices (e.g. MSA500, MSA20).

2. Class Implementations

2.1 HPVC_SAController HPVC_SAController represents the Smart Array HBA. There will be one instance per HBA.

Table 1 – Class: HPVC_SAController

Property Name Property Implementation CIM_ManagedElement

ElementName Controller product name and controller index e.g. “HPE Smart Array P400 Controller : HPSA1” Note: Each Smart Array controller should have a unique controller index. Index is an integer that starts from 1.

CIM_ ManagedSystemElement HealthState 0 (Unknown)

5 (OK) 10 (Degraded/Warning) 15 (Minor Failure) 20 (Major Failure) 25 (Critical Failure) 30 (Non-recoverable Error)

CIM_ LogicalElement CIM_ EnabledLogicalElement

CIM_System CreationClassName “HPVC_SAController” Name vmwControllerX

Note: VMware Virtual Infrastructure Client requires “Name” to be “vmwControllerX”, where X can be any string. In our case, string X should match the controller name reported in HPVC_SAControllerElementName. e.g. “vmwControllerHPSA1”

Property Name Property Implementation CIM_ComputerSystem

VMware_Controller HPVC_SAController

2.2 HPVC_SAControllerFirmware HPVC_SAControllerFirmware represents Smart Array controller firmware. There will be one instance per HBA.

Table 2 – Class: HPVC_SAControllerFirmware


ElementName Smart Array Controller X Note: VMware Virtual Infrastructure client requires controller name string X matches “vmwControllerX” reported in HPVC_SAControllerName. e.g. “Smart Array Controller HPSA1”

CIM_ ManagedSystemElement Name Smart Array Controller X Firmware

CIM_ LogicalElement Caption Smart Array Controller X Firmware

CIM_ SoftwareIdentity InstanceID HPQ:Smart Array Controller X Manufacturer HP VersionString Smart Array controller firmware version

e.g. “4.12”

HPVC_SAControllerFirmware

2.3 HPVC_SABattery HPVC_SABattery represents Smart Array controller battery.

Table 3 – Class: HPVC_SABattery


ElementName Battery on HPSA X e.g. “Battery on HPSA1”

CIM_ ManagedSystemElement

Property Name Property Implementation CIM_ LogicalElement

CIM_EnabledLogicalElement CIM_LogicalDevice

CreationClassName HPVC_SABattery DeviceID Battery on HPSA X SystemCreationClassName SMX_ComputerSystem SystemName Server host name

CIM_Battery BatteryStatus 1(Other)

2(Unknown) 3(Fully Charged) 4(Low) 5(Critical) 6(Charging) 7(Charging and High) 8(Charging and Low) 9(Charging and Critical) 10(Undefined) 11(Partially Charged) 12(Learning) 13(Overcharged) VMware_Battery HPVC_SABattery

2.4 HPVC_SAStorageExtent HPVC_SAStorageExtent represents physical disk attached to Smart Array controller. There will be one instance per physical disk.

Table 4 – Class: HPVC_SAStorageExtent


ElementName Disk Y on HPSA X : Location : Capacity : Disk Role : Detailed Status Disk Role shows whether this disk is a data disk, a spare disk, or an unconfigured disk. Detailed Status reports detailed disk status information when disk is degraded or failed. When disk is in OK condition, this Detailed Status is an empty string. e.g. “Disk 1 on HPSA 1 : Port 1I Box 1 Bay 8 : 68GB : Data Disk : Disk Error”

Property Name Property Implementation CIM_ManagedSystemElement

Name Serial number HealthState 0 (Unknown)


CIM_LogicalElement Caption Disk Y on HPSA X

CIM_EnabledLogicalElement CIM_LogicalDevice

CreationClassName HPVC_SAStorageExtent DeviceID HPVC_SAStorageExtent-<model>-<serial number>

e.g. HPVC_SAStorageExtent-HPDG072BB975-3NP2TCCF000098402P95

SystemCreationClassName SMX_ComputerSystem SystemName Server host name

CIM_StorageExtent BlockSize Block size in bytes NumberOfBlocks Total number of blocks on disk drive Primordial Set to “True”

VMware_StorageExtent HPVC_SAStorageExtent

2.5 HPVC_SAStorageVolume HPVC_SAStorageVolume reprents logical volumes configured on Smart Array controller. There will be one instance per logical volume.

Table 5 – Class: HPVC_SAStorageVolume

Property Name Property Implementation ElementName Logical Volume Y on HPSA X : RAID level : Capacity :

Associated Physical Disks : Detailed Status Associated Physical Disks reports a list of physical disks that are associated with this logical volume. Physical disk’s index should match the one reported in HPVC_SAStorageVolume Element Name. Detailed Status shows detailed volume status information when this logical volume is degraded or failed. When logical volume is in an OK condition, this field should be an empty string. e.g. “Logical Volume 1 on HPSA 1 : RAID 0 : 68GB : Disk 1, 3, 4 : Interim Recovery”

CIM_ ManagedSystemElement HealthState 0 (Unknown)


CIM_ LogicalElement CIM_ EnabledLogicalElement

CIM_ LogicalDevice CreationClassName HPVC_SAStorageVolume DeviceID HPVC_SAStorageVolume-<unique volume ID>

e.g. HPVC_SAStorageVolume-600508b10010463956564636454e0007

SystemCreationClassName SMX_ComputerSystem SystemName Server host name

CIM_ StorageExtent BlockSize Block size in bytes NumberOfBlocks Total number of blocks on the volume

CIM_StorageVolume VMware_StorageVolume HPVC_SAStorageVolume

Error! No text of specified style in document. 1

1 HPE Insight Manager WBEM Base Server Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Base Server provider implements and extends CIM classes described in this document to model the base server. These classes provide computational information and capabilities and serve as an aggregation point to associate one or more elements that make up a base server, such as: Fans, PowerSupplies, Processor and Memory (Volatile and/or NonVolatile Storage).

Profile Name Organization Version

HP Base Server Profile (P00105)

HP WBEM TC 2.0.0

HP Base Server Physical Asset Profile (P00114)

HP WBEM TC 1.1.0

HP Software Inventory (P00127)

HP WBEM TC 1.0.1

HP Server Product Profile (P00136)

HP WBEM TC 1.1.1

Requirements

For each hardware architecture listed, this provider requires the following distributions

HPE ProLiant managed servers

vSphere 5.1 and later



Release History Initial release with HP Insight Management WBEM Providers for Linux v2.0.


1-1 Setting up the Provider Installing the Provider

There are no special installation instructions for this provider. It is installed by default as part of the HPE Insight Management WBEM providers.

Configuring the Provider

This provider does not accept specific configuration adjustments beyond standard HPE Insight Management WBEM support.

1-2 Using the Provider Namespaces Supported by the Provider This provider returns instances in the root/hpq namespace.

Schema Supported by the Provider

This provider supports the following classes:

• SMX_ComputerSystem

• SMX_ComputerSystemChassis

• SMX_ComputerSystemPackage

• SMX_OperatingSystem

• SMX_RunningOS

• SMX_InstalledOS

• SMX_SMXSoftwareIdentity

• SMX_SMXInstalledSoftwareIdentity

• SMX_SystemFirmware

• SMX_SystemInstalledFirmwareIdentity

• SMX_SystemElementFirmwareIdentity

• SMX_CPLDFirmware

• SMX_CPLDElementFirmwareIdentity

• SMX_CPLDInstalledFirmwareIdentity

The tables in the following sections describe the properties of the supported classes. The classes are categorized by the class or superclass that defines the property, the first column is the Property Name (including type and units) and the second column describes how the provider determines the properties implementation. When the Property Implementation value is a number, the number given is the default


behavior and the Managed Object Format interpretation is within parenthesis. If other values are returned, a problem is indicated.

Unless otherwise noted, all of the property implementation values given are for HPE ProLiant and HPE Integrity (cellular and non-cellular) systems. The location related properties and implementation values are determined based on the server type so they may differ.

1-2-1 SMX_ComputerSystem Class The SMX_ComputerSystem class implements the HP_ComputerSystem class to model the base server. There is only one instance of SMX_ComputerSystem instantiated on a server. The following table lists the properties implemented.

Property Name Property Implementation

CIM_ManagedElement

Caption Computer system DNS name returned by uname.

Description Computer system DNS name returned by uname.

ElementName Computer system DNS name returned by uname.

CIM_ManagedSystemElement

Status Same as OperationalStatus[0].

OperationalStatus

OperationalStatus[0] contains the computer system consolidated status and indicates the worst status of any connected subsystem. OperationalStatus[0] will contain one of the following:

0 (Unknown)

1 (Other)

2 (OK)

3 (Degraded)

6 (Error)

10 (Stopped)

The status values of the subsystems that make up the overall



operational status are contained in OperationalStatus[1-n]. See the descriptions for GroupOperationalStatus for the list of possible values.

OperationalStatusClassNames

OperationalStatusClassNames[0] contains the computer system class name, SMX_ComputerSystem.CreationClassName.

The class name of the HP_GroupSystemSpecificCollection class for the subsystems that make up the overall operational status reported in OperationalStatus[1-n] are contained in OperationalStatusClassNames[1-n]. See the datasheets for each provider for the values of each class name.



StatusDescriptions

StatusDescriptions[0] will contain one of the following corresponding to OperationalStatus[0]:

One or more of the subsystems that make up this computer system have an OperationalStatus value of Unknown

One or more of the subsystems that make up this computer system have an OperationalStatus value of Other

One or more of the subsystems that make up this computer system have an OperationalStatus value of Degraded

One or more of the subsystems that make up this computer system have an OperationalStatus value of Error

One or more of the subsystems that make up this computer system have an OperationalStatus value of Stopped

The status descriptions of the subsystems that make up the overall operational status are contained in OperationalStatus[1-n]. These will be set to:

Unknown

OK

Error

Stopped

Predictive Failure

HealthState

0 (Unknown)

5 (OK)

10 (Degraded)

20 (Major Failure)

CIM_LogicalElement

CIM_EnabledLogicalElement

EnabledState 5 (Not Applicable)

RequestedState 12 (Not Applicable)

EnabledDefault 2 (Enabled)

CIM_System

CreationClassName SMX_ComputerSystem

Roles Computer system roles string: initialized to not set.

CIM_ComputerSystem

OtherIdentifyingInfo

OtherIdentifyingInfo[0]:

<GUID_String>

Where: <GUID_String> is the computer system physical GUID string.


<MAC_String>

Where: <MAC_String> is the computer system MAC address.


<Model_String>:< Serial_Number_String >

Where: <Model_String> is the computer system model string; and Serial_Number_String is the computer system physical serial number string.


<Tag_String>

Where: <Tag_String> is the computer system asset tag string.


<GUID_String::MAC_String>

Where: <GUID_String> is the computer system physical GUID string and <MAC_String> is the computer system MAC address.


<ProductID_String>

Where: <ProductID_String> is SMX_ComputerSystemChassis.ProductID.


<Target_String>

Where: <Target_String> is an opaque string used by the providers.

IdentifyingDescriptions

IdentifyingDescriptions[0]:

CIM:GUID


CIM:MAC


CIM:Model:SerialNumber


CIM:Tag

IdentifyingDescriptions[4]

CIM:CorrelatableID



HPQ:ProductID


HPQ:SMXTarget

Dedicated

0 (Not Dedicated)

For x86 Superdome servers,

2 (DedicatedOther)

32569 (DedicatedPhysicalPartition)

32572 (DedicatedBlade)

HP_ComputerSystem

Name Computer system DNS name returned by uname.

NameFormat DNSName

PrimaryOwnerName Computer system primary owner name string; initialized to not set.

PrimaryOwnerContact Computer system primary owner contact string; initialized to not set.

PrimaryOwnerPager Computer system primary owner pager string; initialized to not set.

SecondaryOwnerContact Computer system secondary owner contact string; initialized to not set.

SecondaryOwnerName Computer system secondary owner name string; initialized to not set.

SecondaryOwnerPager Computer system secondary owner pager string; initialized to not set.

LocationIndicator

State of the computer system Unit Identifier (UID) LED:

0 (Unknown)

2 (On)

3 (Off)

5 (Alternating)

SerialNumber The computer system physical serial number string.

IdentifyingNumber The computer system physical GUID string.

IncludedInSolution Boolean property that indicates whether the system is part of aggregate systems.

SolutionName

This property is a string that shall contain a unique name that describes the product family for the aggregate product along with the version. Notation: “<Solution Name> vX.Y.Z” where X is Major number, Y is Minor number and Z is Update number Eg. “CloudSystem Matrix v6.3.1a”. This property is only implemented if HP_ComputerSystem.IncludedInSolution is True.

Model The computer system model string.

PartitionNumber Partition ID (supported only on x86 Superdome servers)

SMX_ComputerSystem


1-2-1-1 Implemented Methods for SMX_ComputerSystem Class Method Name Method Implementation

SendTestIndication

Method Parameters:

EventID, number of test event to send:

101 - Send Information Test Indication

102 - Send Warning Test Indication

103 - Send Critical Test Indication

Return Values:

0 - request to send indication successful

1 - method unsupported

2 - request to send indication failed

3 - provider is busy processing previously requested indication, try again

4 - EventID is not one of the defined values

Exception: CIM_ERR_INVALID_PARAMETER - EventID is the wrong type, does not exist or other internal error.

1-2-2 SMX_ComputerSystemChassis Class The SMX_ComputerSystemChassis class implements the HP_ComputerSystemChassis class to model the physical system chassis. There is only one instance of SMX_ComputerSystemChassis instantiated on a server.

For x86 Superdome servers, there’s one instance of SMX_ComputerSystemChassis per blade in the partition.

The following table lists the properties implemented.


CIM_PhysicalElement

Tag Unique value for instance.

For example: 1



CreationClassName SMX_ComputerSystemChassis

ElementName Computer system product name (model) string.

Manufacturer Computer manufacturer string.

Model Computer system product name (model) string.

SerialNumber Computer system physical serial number.

UserTracking

Computer system asset tag string (writable property; persistent across reboots).

(not supported on x86 Superdome servers)

Name Computer system product name (model) string.

Status OK


StatusDescriptions

Description of the state of the chassis, for example System is functional.


Description

General description of the chassis

For example: Physical Package for this system.

OperationalStatus 2 (OK)


PoweredOn TRUE


CIM_PhysicalPackage



RemovalConditions 2 (Not Applicable)

PackageType 3 (Chassis/Frame)


CIM_PhysicalFrame

CIM_Chassis

ChassisPackageType See MOF for definitions. This value is retrieved from SMBIOS.

ChassisTypeDescription See MOF for definitions. This value is retrieved from SMBIOS


RackMountable

0 (Unknown)

1 (True)

2 (False)


HP_ComputerSystemChassis

ProductID

Computer system product ID string

For example: 123456-123.

VirtualUUID[] If Synergy is enabled, this will contain the logical UUID for the system.


VirtualSerialNumber[]

If Synergy is enabled, this will contain the logical Serial Number for the system.


TPMModule Indicates the installed and enabled state of the Trusted Platform Module.



1: Other;

2: Absent;;

3: Present and Enabled;

4: Present but Disabled;


SMX_ComputerSystemChassis

1-2-3 SMX_ComputerSystemPackage Class The SMX_ComputerSystemPackage class implements the HP_ComputerSystemPackage class and associates instances of SMX_ComputerSystem and SMX_ComputerSystemChassis. There is only one instance of SMX_ComputerSystemPackage instantiated on a server.

For x86 Superdome servers, there’s one instance of SMX_ComputerSystemPackage per blade in the partition.



CIM_Dependency

CIM_SystemPackaging

CIM_ComputerSystemPackage

PlatformGUID Computer system physical UUID value from SMBIOS.

HP_ComputerSystemPackage

Antecedent References SMX_ComputerSystemChassis

Dependent References SMX_ComputerSystem

SMX_ComputerSystemPackage


1-2-4 SMX_OperatingSystem Class The SMX_OperatingSystem class implements the CIM_OperatingSystem class to model the system operating system. There is only one instance of SMX_OperatingSystem instantiated on a server.



CIM_ManagedElement

Caption On Linux, first line of /etc/issue.

On ESXi, output of vmware -v

Description Output of uname -v.

ElementName Output of uname -s.



StatusDescriptions

StatusDescriptions[0] will contain the value map string corresponding to OperationalStatus[0]:

For example: OK

Status OK

HealthState 5 (OK)

PrimaryStatus 1 (OK)

CIM_LogicalElement


EnabledState 2 (Enabled)

RequestedState 0 (Unknown)



EnabledDefault 2(Enabled)

TransitioningToState 12 (Not Applicable)

CIM_OperatingSystem

CSName SMX_ComputerSystem.Name

CSCreationClassName SMX_ComputerSystem.CreationClassName

Name Output of uname -s.

CreationClassName SMX_OperatingSystem

Version Output of uname -r.

OtherTypeDescription On Linux, NULL

On ESXi, Embedded

OSType On ESXi, 39 (VM)

LocalDateTime Current time.

LastBootUpTime Time when the operating system was last booted

SMX_OperatingSystem

1-2-5 SMX_RunningOS Class The SMX_RunningOS class implements the CIM_RunningOS class and associates the SMX_ComputerSystem instance and an SMX_OperatingSystem instance.



CIM_RunningOS


Antecedent References SMX_OperatingSystem


SMX_RunningOS

1-2-6 SMX_InstalledOS Class The SMX_InstalledOS class implements the CIM_InstalledOS class and associates the SMX_ComputerSystem instance and a SMX_OperatingSystem instance.



CIM_InstalledOS

PartComponent References SMX_OperatingSystem

GroupComponent References SMX_ComputerSystem

SMX_InstalledOS

1-2-7 SMX_SMXSoftwareIdentity Class The SMX_SMXSoftwareIdentity implements the HP_SoftwareIdentity class to model the SMX software identification information.



CIM_ManagedElement

Caption

Short description of the SMX product

For example:

HPE Insight Management WBEM Providers

HPE Insight Management Limited WBEM Providers



Description

Description of the SMX product

For example: HPE System Management eXtensions (SMX) are WBEM Providers,

using DMTF standard profiles.

ElementName

For a full installation of the WBEM providers

hpe-smx

For a limited installation of the WBEM providers

hpe-smx-limited


Name hpe-smx-limited


StatusDescriptions Description of the installation status of the software identity

For example: SMX is installed properly

Status OK

HealthState 5 (OK)

CIM_LogicalElement

CIM_SoftwareIdentity

InstanceID

Opaque string using HPQ as OrgID

For example: HPQ:SMX_SMXSoftwareIdentity-1.

MajorVersion The first numeric value in the VersionString.



MinorVersion The second numeric value in the VersionString.

RevisionNumber The third numeric value in the VersionString.

VersionString Version of SMX, for example: 02.00.00.

Manufacturer Hewlett Packard Enterprise Company

Classifications[0] 5 (Instrumentation)

IsEntity TRUE

TargetOSTypes[0] On ESXi, 39 (VM).

IdentityInfoType[]

IdentityInfoType[0] will contain the following:

CIM:SoftwareFamily

IdentityInfoType[1] will contain the following:

HPQ:SoftwareCategory

IdentityInfoValue[]

IdentityInfoValue[0] will contain the following for a full installation of the WBEM providers:

HPQ:hp-smx

IdentityInfoValue[0] will contain the following for a limited installation of the WBEM providers:

HPQ:hp-smx-limited

IdentityInfoValue[1] will contain the following:

System Management

HP_SoftwareIdentity

SMX_SMXSoftwareIdentity

1-2-8 SMX_SMXInstalledSoftwareIdentity Class The SMX_SMXInstalledSoftwareIdentity class implements the CIM_InstalledSoftwareIdentity class and associates the SMX_ComputerSystem instance and a SMX_SMXSoftwareIdentity instance.



CIM_InstalledSoftwareIdentity

InstalledSoftware References SMX_SMXSoftwareIdentity

System References SMX_ComputerSystem

SMX_SMXInstalledSoftwareIdentity

1-2-9 SMX_SystemFirmware Class The SMX_SystemFirmware class implements the HP_SoftwareIdentity class and describes the firmware found on the server system.



CIM_ManagedElement

Caption

A description of the firmware.

For example, on HPE ProLiant:

System ROM Firmware-<family_code>(<state>) () where family_code is the system ROM family code and state is either Active or Redundant.

For example:

System ROM Firmware-P31 (Active)

System ROM Firmware-P31 (Redundant)

Description A description of the firmware.

ElementName A description of the firmware.

Name A name for the firmware.


StatusDescriptions

StatusDescriptions[0] will contain the following corresponding to OperationalStatus[0]:

System Firmware Status: OK

HealthState 5 (OK)

CIM_LogicalElement


InstanceID

Opaque string using HPQ as OrgID

For example: HPQ:SMX_SystemFirmware:<n>

Where: <n> is used to identify the instance. For example:

HPQ:SMX_SystemFirmware:1

MajorVersion The firmware major version.

MinorVersion The firmware minor version.

VersionString The firmware version.

Manufacturer HPE

Classifications 11 (Bios/FCode)

10 (UEFI)

ClassificationDescriptions System Firmware

Unified Extensible Firmware Interface(UEFI)

IdentityInfoValue

On HPE ProLiant, this will contain:

HPQ:<family_code>

Where: <family_code> is the system ROM family code.

For example: HPQ:P31

On HPE Integrity, this will contain:

HPQ:ElementName

IdentityInfoType CIM:SoftwareFamily

ReleaseDate

YYYYMMDD******.**********

Where: YYYY is the 4 digit year, MM is the 2 digit month, and DD is the 2 digit day

SMX_SystemFirmware

1-2-10 SMX_SystemInstalledFirmwareIdentity Class The HP_SystemInstalledFirmwareIdentity class extends the CIM_InstalledSoftwareIdentity class and associates the HP_ComputerSystem instance and a SMX_SystemFirmware instance.




SMX_SystemInstalledFirmwareIdentity

InstalledSoftware References SMX_SystemFirmware

System References SMX_ComputerSystem


1-2-11 SMX_SystemElementFirmwareIdentity Class The HP_SystemElementFirmwareIdentity class implements the HP_ElementSoftwareIdentity class and associates the HP_ComputerSystem instance and SMX_SystemFirmware instances.




CIM_Dependency

CIM_ElementSoftwareIdentity

UpgradeCondition 3 (Owner Upgradeable)

ElementSoftwareStatus

The ElementSoftwareStatus array will contain the following if the Antecedent refers to an instance of an Active Firmware:

ElementSoftwareStatus[0]:

6 (Installed)


2 (Current)

The ElementSoftwareStatus array will contain the following if the Antecedent refers to an instance of a Redundant Firmware:


6 (Installed)


4 (Fallback)

SMX_SystemElementFirmwareIdentity

Antecedent References SMX_SystemFirmware


1-2-12 SMX_CPLDFirmware Class The SMX_CPLDFirmware class implements the HP_SoftwareIdentity class and describes the CPLD firmware found on the server.

CIM_ManagedElement

Caption

System Programmable Logic Device<TargetType> : Opaque key.

For SLChassisCPLD: SL- <TargetType> Backplane Programmable Logic Device: Opaque key.

Description

System Programmable Logic Device<TargetType>

For SLChassisCPLD: SL- <TargetType> Backplane Programmable Logic Device

ElementName


For SLChassisCPLD: SL- <TargetType >Backplane Programmable Logic Device: Opaque key.


OperationalStatus[0] 2 (OK)

StatusDescriptions[0]

System Programmable Logic Device<TargetType> firmware is installed properly.

For SLChassisCPLD: SL- <TargetType >Backplane Programmable Logic Device firmware is installed properly.

HealthState 5 (OK)

Name


For SLChassisCPLD: SL- <TargetType> Backplane Programmable Logic Device: Opaque key.

CIM_LogicalElement

InstanceID Opaque key


Classifications 10 (Firmware)

ClassificationDescriptions

For Hardware CPLD : System Programmable Logic Device CPLD Firmware

For SL Chassis CPLD: SL- Backplane Programmable Logic Device Firmware

IsEntity TRUE

VersionString < TargetType > System CPLD Version <firmware version string >

IdentityInfoType [0]CIM:SoftwareFamily

[1]HPQ:SoftwareCategory

IdentityInfoValue

[0]HPQ: <TargetType value>

[1] For Hardware CPLD : System Programmable Logic Device: Opaque key.

For SL Chassis CPLD: SL > Backplane Programmable Logic Device: Opaque key.

1-2-13 SMX_CPLDElementFirmwareIdentity Class The SMX_CPLDElementFirmwareIdentity class associates the HP_ComputerSystem instance with SMX_CPLDFirmware.


Dependent References HP_ComputerSystem



Antecedent References SMX_CPLDFirmware

UpgradeCondition Owner Upgradeable (3)

ElementSoftwareStatus 2 (Current), 6 (Installed)

1-2-14 SMX_CPLDInstalledFirmwareIdentity Class The SMX_CPLDInstalledFirmwareIdentity class associates the HP_ComputerSystem instance with the installed SMX_CPLDFirmware instance.


System References HP_ComputerSystem

InstalledSoftware References SMX_CPLDFirmware

1-2-15 SMX_AggregateProduct Class Note: This class is supported only for x86 Superdome servers.

HP_AggregateProduct is used to represent the complex.


CIM_Product

Name Complex product name

For example, “Superdome2 16s x86”

Version Product Information Version

Vendor Complex manufacturer

IdentifyingNumber Complex serial number

SKUNumber Complex product ID



For example: AH337A.

1-2-16 SMX_ServerProduct Class Note: This class is supported only for x86 Superdome servers.

HP_ServerProduct is used to represent the entitlement entity, which is currently the complex. Therefore the properties in HP_ServerProduct class are identical to the properties in HP_AggregateProduct class.


CIM_Product

Name Complex product name

For example, “BL920s Gen8”

Version Product Information Version

Vendor Complex manufacturer

IdentifyingNumber Complex serial number

SKUNumber Complex product ID

For example: AT068-60302.

1-2-17 SMX_ServerProductPhysicalComponent Class Note: This class is supported only for x86 Superdome servers.

SMX_ServerProductPhysicalComponent associates SMX_ServerProduct class instances to SMX_ComputerSystemChassis class instance.


There’s one instance of SMX_ServerProductPhysicalComponent per blade in the partition.


CIM_Product

GroupComponent Link to SMX_ServerProduct class associated with SMX_ComputerSystemChassis class

PartComponent Link to SMX_ComputerSystemChassis Class

1-2-18 SMX_ProductParentChild Class Note: This class is supported only for x86 Superdome servers.

SMX_ServerProductParentChild associates SMX_AggregateProduct class instances to SMX_ServerProduct class instance.


CIM_Product

Parent Link to SMX_AggregateProduct class associated with SMX_ServerProduct class

Child Link to SMX_ServerProduct Class

1-3 Supported Indications The following table describes the properties that are common to all of the SMX Base Server Provider indications that are implemented for server platforms, where available.

The following table lists the common properties implemented.

CIM_Indication

IndicationIdentifier Unique identifying string generated at the time of the indication

IndicationTime Time of indication

CIM_AlertIndication

EventTime Time of the event or time of the indication if event time unknown

SystemName SMX_ComputerSystem.Name

SystemCreationClassName SMX_ComputerSystem.CreationClassName

HP_AlertIndication

ProviderVersion Provider Version in the format VV.UU.FF.

For example: 01.05.00

NetworkAddresses Contains a list of all the IP addresses of the computer system generating the indication

OSType On ESX, 39 (VM)

OSVersion The operating system version of the computer system generating the indication in the following format: <major>.<minor>.<build>

SystemFirmwareVersion Array of firmware versions of the computer system generating the indication

SystemSerialNumber Serial number of the computer system generating the indication

SystemProductID Product ID of the computer system generating the indication

SystemModel Model name of the computer system generating the indication

SystemGUID Platform GUID of the computer system generating the indication

SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format <aggregate product family name> v<major>.<minor>.<update>

1-3-1 HP_DeviceIndication:WBEM Providers Started The following tables describe the SMX Base Server Provider indications that are implemented for all server platforms.


CIM_Indication

PerceivedSeverity 2 (Informational)

CIM_AlertIndication

Description HP Management WBEM Providers have started.

AlertType 5 (Device Alert)

EventID 1

ProviderName HP WBEM

RecommendedActions No action is recommended.

HP_AlertIndication

Summary WBEM Providers started

ProbableCause 1 (Other)

ProbableCauseDescription WBEM Providers Started

1-3-2 HP_DeviceIndication: WBEM Providers Informational Test Indication


CIM_Indication


CIM_AlertIndication

Description This is an information test event.


EventID 1

ProviderName HP Test


HP_AlertIndication

Summary Test Event Id: <even id>


ProbableCauseDescription Test Indication

1-3-3 HP_DeviceIndication: WBEM Providers Warning Test Indication


CIM_Indication

PerceivedSeverity 3 (Warning)

CIM_AlertIndication



Description This is a warning test event.


EventID 2



HP_AlertIndication




1-3-4 HP_DeviceIndication: WBEM Providers Critical Test Indication


CIM_Indication

PerceivedSeverity 6 (Critical)

CIM_AlertIndication

Description This is a Critical Test Event


EventID 3





HP_AlertIndication




1-3-5 HP_DeviceIndication: ASR Reboot Occurred Note: This indication is not supported on x86 Superdome servers.


CIM_Indication

PerceivedSeverity 5 (Major)

CIM_AlertIndication

Description The system has rebooted from an Automatic Server Recovery (ASR) event.


EventID 1

ProviderName HP Recovery

RecommendedActions Determine the nature of the ASR event and take corrective action.

HP_AlertIndication

Summary ASR reboot occurred



EventCategory 16 (System Power)

ProbableCause 111 (Timeout)

ProbableCauseDescription ASR reboot occurred

1-3-6 HP_DeviceIndication: Thermal Reboot Occurred Note: This indication is not supported on x86 Superdome servers.


CIM_Indication


CIM_AlertIndication

Description The system has rebooted from thernal shutdownevent.


EventID 2


RecommendedActions Replace any failed or removed fans. Insure the air flow into, out of, and within the system chassis is not obstructed.

HP_AlertIndication

Summary Thermal reboot occurred

EventCategory 23 (System Cooling)

ProbableCause 51 (Temperature Unacceptable)



ProbableCauseDescription Thermal reboot occurred

1-3-7 HP_DeviceIndication: Fan Failure Reboot Occurred Note: This indication is not supported on x86 Superdome servers.


CIM_Indication


CIM_AlertIndication

Description The system has rebooted from fan failure shutdown event.


EventID 3


RecommendedActions Replace any failed or removed fans.

HP_AlertIndication

Summary Fan failure reboot occurred


ProbableCause 94 (Fan Failure)

ProbableCauseDescription Fan failure reboot occurred

1-3-8 HP_DeviceIndication: VRM Failure Reboot Occurred Note: This indication is not supported on x86 Superdome servers.



CIM_Indication


CIM_AlertIndication

Description The system has rebooted from VRM failure shutdown event.


EventID 4


RecommendedActions Replace any failed or removed power supplies.

HP_AlertIndication

Summary VRM failure reboot occurred


ProbableCause 89 (Power Supply Failure)

ProbableCauseDescription VRM failure reboot occurred

1-3-9 HP_DeviceIndication: POST Occurred Note: This indication is not supported on x86 Superdome servers.


CIM_Indication




CIM_AlertIndication

Description Power-On Self-Test errors occurred during the last system startup.


EventID 1

ProviderName HP Post

RecommendedActions Determine the nature of the POST error and take corrective action.

HP_AlertIndication

Summary POST errors occurred

EventCategory 4 (System Harware)

ProbableCause 8 (Configuration/Customization Error)

ProbableCauseDescription POST Errors occurred

VariableNames VariableNames[0]: POST Error Code

VariableNames[1]: POST Error String

VariableTypes VariableTypes[0]: 3 (uint8)

VariableTypes[1]: 1 (string)

VariableValues VariableValues[0]: The POST error code as specified by the System ROM

VariableValues[1]: The POST error string as specified by the System ROM


1-3-10 HP_DeviceIndication: OS boot has been completed Note: This indication is supported only for x86 Superdome servers.


CIM_Indication

PerceivedSeverity 2 (Inforamtional)

CIM_AlertIndication

Description OS boot has been completed.


EventID 4

ProviderName HP WBEM

RecommendedActions No action required

HP_AlertIndication

Summary OS boot completed


ProbableCauseDescription This event indicates the operating system has completed its initialization and ready for use. This is an informational message. No action is needed.

HPE Insight Management WBEM Blade System Lite Provider Overview 1

1 HPE Insight Management WBEM Blade System Lite Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Blade System Lite provider extends the management capability of referencing profiles by adding the capability to represent the Distributed Management Task Force (DMTF) Modular System Profile in HPEspecific ways. While this profile is based on the DMTF Modular System Profile, it does not conform to that profile. This is intended to be supported only by the blades within an enclosure as a means for tying the blade to an enclosure. This profile is not intended to be implemented by the enclosure (using the Onboard Administrator). The Onboard Administrator shall manage the shared enclosure resources.

This provider implements the following profiles and installs the necessary files:


HP Blade System Lite Profile (P00125)

HP WBEM TC 3.2.0

Requirements






Release History Initial release with HP Insight Management Providers for Linux v2.0.

1-1 Setting Up the Provider Installing the Provider








• SMX_BladeEnclosureCS

• SMX_BladeEnclosureCollection

• SMX_BladeSystemComponent

• SMX_MemberOfBladeEnclosureCollection

• SMX_BladeEnclosureGroupHostedCollection

• SMX_BladeEnclosureFW

• SMX_BladeEnclosureFWIdentity

• SMX_BladeEnclosureInstalledFWIdentity

• SMX_BladeCSLocation

• SMX_BladeCSElementLocation

The tables in the following sections describe the properties of the supported classes. The classes are categorized by the class or superclass that defines the property, the first column is the Property Name (including type and units) and the second column describes how the provider determines the properties implementation. When the Property Implementation value is a number, the number given is the default behavior and the Managed Object Format interpretation is within parenthesis. If other values are returned, a problem is indicated.


1-2-1 SMX_BladeEnclosureCS Class The SMX_BladeEnclosureCS class implements the HP_BladeEnclosureCS class and describes a blade system enclosure.



CIM_ManagedElement

Caption

A description of the class.

For example, if enclosure name exists:

HPE BladeSystem enclosure <enclosure name>

For SL servers:

HPE Multi-node chassis system

otherwise:

HPE BladeSystem enclosure

Description




For SL servers:


otherwise:


ElementName




For SL servers:



otherwise:



OperationalStatus

0 (Unknown), enclosure status: Unknown

2 (OK), enclosure status: OK

3 (Degraded), enclosure status: Degraded

6 (Error), enclosure status: Error

StatusDescriptions

StatusDescriptions[0] per OperationalStatus[0]:

Server Blade Enclosure and Onboard Administrator status: Unknown

Server Blade Enclosure and Onboard Administrator status: OK

Server Blade Enclosure and Onboard Administrator status: Degraded

Server Blade Enclosure and Onboard Administrator status: Error

For SL server:

HPE Multi-node chassis system: Unknown

HealthState

0 (Unknown), enclosure status: Unknown

5 (OK), enclosure status: OK

10 (Degraded/Warning), enclosure status: Degraded

20 (Major Failure), enclosure status: Error

CIM_LogicalElement

CIM_System

CreationClassName SMX_BladeEnclosureCS

CIM_ComputerSystem

Dedicated 2 (Other)

OtherDedicatedDescriptions

Modular

For SL server:

Multi-node

IdentifyingDescriptions


HPQ:ProductID


CIM:Model:SerialNumber



<ProductID_String>

Where: <ProductID_String> is the blade enclosure product ID.


<Model_String>:<Serial_Number_String>

Where: <Model_String> is the blade enclosure model string; and Serial_Number_String> is the blade enclosure serial number string.

Name

Text description of the modular system enclosure. The DNS name is populated if available.

For SL server:

Proliant SL Chassis <serial number>

NameFormat

DNSName

For SL server:

Chassis Type

HP_BladeEnclosureCS

ManagementIPAddress The enclosure’s management IP address.

ManagementURL The URL of the enclosure’s management web-based user interface.

SerialNumber The serial number of the blade enclosure.

ProductID The product ID of the blade enclosure.

RackName The name of the rack.

RackUID The UUID of the rack.

EnclosureName Then name of the blade enclosure.

ManagementIPv6Address (Deprecated)

The enclosure’s management IPv6 address

ManagementAddress[]

Array of IPv6 Addresses of the management network interface of the blade enclosure.

IPv6AddressPrefixLengths[] Prefix Length of the corresponding IPv6 Address in ManagementAddresses property.



IPv6AddressSources[] Array of Address sources of corresponding IPv6 Address in ManagementAddresses property.

IPv6AddressStates[]

Array of Address states of corresponding IPv6 Address in ManagementAddresses property.

ValueMap ["0", "1", "2", "3"]

Values ["Unknown", "Active", "Pending", "Failed"]

1-2-2 SMX_BladeEnclosureCollection Class The SMX_BladeEnclosureCollection class implements the HP_BladeEnclosureCollection class to aggregate the enclosure’s group operational status.



CIM_ManagedElement

Description A description of the class, for example: A collection of server blade enclosures with group aggregate status

ElementName A name for the class, for example: Server Blade Enclosure Collection.

CIM_Collection

CIM_SystemSpecificCollection

InstanceID Opaque identifier using HPQ for OrgID. For example: HPQ:SMX_BladeEnclosureCollection:1.

HP_GroupSystemSpecificCollection

Caption A caption for the class, for example: Server Blade Enclosure Collection



GroupOperationalStatus

Describes the group operational status of the blade enclosure collection. The group operational status represents the ‘worst-of’ algorithm for all individual enclosure statuses in HP_BladeEnclosureCS.OperationalStatus[0].

GroupOperationalStatus[0] contains group operational status:

0 (Unknown)

2 (OK)

3 (Degraded)

6 (Error)

GroupStatusDescriptions

GroupStatusDescriptions[0] per GroupOperationalStatus[0]:

Server Blade Enclosure and Onboard Administrator status: Unknown

Server Blade Enclosure and Onboard Administrator status: OK

Server Blade Enclosure and Onboard Administrator status: Degraded

Server Blade Enclosure and Onboard Administrator status: Error

HP_BladeEnclosureCollection

1-2-3 SMX_BladeSystemComponent Class The SMX_BladeSystemComponent class implements the HP_BladeSystemComponent class and associates the enclosure’s computer system instance to the blade’s computer system instance.



CIM_Component

CIM_SystemComponent



HP_BladeSystemComponent

GroupComponent References HP_BladeEnclosureCS (the blade enclosure computer system)

PartComponent References CIM_ComputerSystem (the blade servers computer system)

1-2-4 SMX_MemberOfBladeEnclosureCollection Class The SMX_MemberOfBladeEnclosureCollection class implements the HP_MemberOfBladeEnclosureCollection class and associates the enclosure’s computer system instance to the blade enclosure collection instance.



CIM_MemberOfCollection

HP_MemberOfBladeEnclosureCollection

Collection References HP_BladeEnclosureCollection

Member References HP_BladeEnclosureCS

1-2-5 SMX_BladeEnclosureGroupHostedCollection Class The SMX_BladeEnclosureGroupHostedCollection class implements the HP_BladeEnclosureGroupHostedCollection class and associates the enclosure’s computer system instance to the blade enclosure collection instance.



CIM_Dependency

CIM_HostedDependency

CIM_HostedCollection

HP_GroupHostedCollection

HP_BladeEnclosureGroupHostedCollection

Antecedent References HP_ComputerSystem

Dependent References HP_BladeEnclosureCollection

1-2-6 SMX_BladeEnclosureFW Class The SMX_BladeEnclosureFW class implements the HP_BladeEnclosureFW class and describes blade enclosure firmware.



CIM_ManagedElement

Caption A caption for the class. For example: Server Blade Enclosure Firmware.

Description A description for the class. For example: HPE Server Blade Enclosure Firmware.

ElementName OA


Name



HPE BladeSystem enclosure <Enclosure_Name>

otherwise:


OperationalStatus 2 (OK), normal operation



StatusDescriptions Server Blade Enclosure Firmware status: OK

HealthState 5 (OK), normal operation

CIM_LogicalElement


InstanceID

Opaque identifier using HPQfor OrgID.

For example: HPQ:SMX_BladeEnclosureFirmware:1.

MajorVersion The major version of the blade enclosure firmware.

MinorVersion The minor version number of the blade enclosure firmware.

VersionString String indicating the blade enclosure firmware version information. This property is the string translation of the content provided in the MajorVersion and MinorVersion properties.

Manufacturer Hewlett Packard Enterprise


ClassificationDescriptions HPE Server Blade Enclosure Firmware

IdentityInfoValue HPQ:OA

IdentityInfoType CIM:SoftwareFamily

HP_BladeEnclosureFW

1-2-7 SMX_BladeEnclosureElementFWIdentity Class The SMX_BladeEnclosureElementFWIdentity class implements the HP_BladeEnclosureElementFWIdentity class and associates a blade enclosure to its corresponding firmware.




CIM_Dependency





6 (Installed)


2 (Current)

HP_BladeEnclosureElementFWIdentity

Antecedent References HP_BladeEnclosureFW

Dependent References HP_BladeEnclosureCS

1-2-8 SMX_BladeEnclosureInstalledFWIdentity Class The SMX_BladeEnclosureInstalledFWIdentity class implements the HP_BladeEnclosureInstalledFWIdentity class and associates a blade enclosure to its corresponding installed firmware.




HP_BladeEnclosureInstalledFWIdentity

System References HP_BladeEnclosureCS

InstalledSoftware References HP_BladeEnclosureFW


1-2-9 SMX_BladeCSLocation Class The SMX_BladeCSLocation class implements the HP_Location class and is used to model the server blade location within an enclosure.

For x86 Superdome servers, there’s one instance of SMX_BladeCSLocation per blade in the partition.

CIM_ManagedElement

Caption

A description of the Blade location.

For example: Blade Computer System Bay Location <n>

For SL server:

Multi-node computer system Node Location <n>

Where: <n> represents the blade bay slot position printed on the enclosure labeling.

Description



For SL server:



ElementName



For SL server:



CIM_Location

Name

Unique identifier for this blade bay location instance.

For example: HPQ:SMX_BladeCSLocation:<n>


PhysicalPosition

<n>


HP_Location

ElementLocationTag The computer system name.

ElementLocationTagDesc

24 (Blade)

For SL server:

25(Server Node)

LocationInformation LocationInformation[0]:

The blade bay number within the enclosure.

LocationInfoDesc

LocationInfoDesc[0]:

14 (Blade Bay)

For SL server:

16(ServerNode)

1-2-10 SMX_BladeCSElementLocation Class The SMX_BladeCSElementLocation class implements the HP_ElementLocation class and is used to represent an association between the CIM_Location and CIM_ManagedElement classes.

For x86 Superdome servers, there’s one instance of SMX_BladeCSElementLocation per blade in the partition.

Property Name Value


Element References CIM_ComputerSystem

PhysicalLocation References HP_BladeCSLocation

1-3 Provider Indications Indications Generated by the Provider This provider generates no indications.

HPE Insight Management WBEM Configuration Record Log Provider Overview 1

1 HPE Insight Management WBEM Configuration Record Log Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Configuration (Config) Record Log provider implements the Configuration Snapshot Log on HPE servers.



HP Record Log Profile (P00109)

HP WBEM TC 1.0

Requirements



ESXi 5.0 and later












• SMX_ConfigRecordLog

• SMX_ConfigLogEntry

• SMX_ConfigLogManagesRecord

• SMX_ConfigUseOfLog

The tables in the following sections describe the properties of the supported classes. The classes are categorized by the class or superclass that defines the property, the first column is the property name (including type and units) and the second column describes how the provider determines the properties implementation. When the property implementation value is a number, the number given is the default behavior and the Managed Object Format interpretation is within parenthesis. If other values are returned, a problem is indicated.


1-2-1 SMX_ConfigRecordLog Class The SMX_ConfigRecordLog class implements the HP_CommonRecordLog class to model the server management record log.



CIM_ManagedElement

Caption Config record log.

Description Config record log.

ElementName Config record log.


Name Config record log.



OperationalStatus

OperationalStatus[0] indicates the status of the Configuration Record Log:

2 (OK)

HealthState 5 (OK), when OperationalStatus[0]=2 (OK)

CIM_LogicalElement



RequestedState 12 (Not applicable)


CIM_Log

MaxNumberOfRecords 1 – Only the most recent snapshot of the configuration will be available.

CurrentNumberOfRecords Number of records in the Config log (SMX_ConfigLogEntry instances).

LogState 2 (Normal)

OverwritePolicy 2 (Wraps Never)

CIM_RecordLog

InstanceID HPQ:SMX_ConfigRecordLog:1

HP_CommonRecordLog

TimeOfLastChange Time of last log change.

The following table lists the methods implemented for the SMX_ConfigRecordLog class.

Method Name Method Implementation


ClearLog Refer to HP Record Log profile (P00109).

UpdateConfig Refer to HP Record Log profile (P00109).

1-2-2 SMX_ConfigLogEntry Class The SMX_ConfigLogEntry class implements the HP_CommonLogEntry class to model logs records within the Configuration log.



CIM_ManagedElement

Caption Config record log entry.

Description Config record log entry.

ElementName Config record log entry.

CIM_RecordForLog

CIM_LogEntry

InstanceID Opaque key.

LogInstanceID SMX_ConfigRecordLog.InstanceID

LogName SMX_ConfigRecordLog.Name

RecordID Config record number.

CreationTimeStamp Config log event creation time stamp.

HP_CommonLogEntry

RecordDataType 3 (Delimited)

RawData Instances in CIM-XML encoding.



MajorClass 21 (Config Snapshot)

MinorClass 2 (None)

OSType 0 (Unknown)

39 (VMware)

SystemSerialNumber System serial number string from SMBIOS.

SystemProductID System product ID string from SMBIOS.

SystemModel System model number string from SMBIOS.

SystemName Computer system name.

LoggerType 2 (Server)

1-2-3 SMX_ConfigLogManagesRecord Class The SMX_ConfigLogManagesRecord class implements the HP_LogManagesRecord class and associates instances of HP_RecordLog and HP_LogEntry.



CIM_LogManagesRecord

HP_LogManagesRecord

Log Reference HP_CommonRecordLog.

Record Reference HP_CommonLogEntry.

1-2-4 SMX_ConfigUseOfLog Class The SMX_ConfigUseOfLog class implements the HP_UseOfLog class and associates the instance of HP_ComputerSystem with the instance of HP_CommonRecordLog.




CIM_Dependency

CIM_UseOfLog

HP_UseOfLog

Antecedent Reference HP_CommonRecordLog.

Dependent Reference HP_ComputerSystem.


HPE Insight Management WBEM CPU Provider Overview 1

1 HPE Insight Management WBEM CPU Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) CPU provider implements and extends classes described in this document to model the system processors.



HP CPU Profile (P00106) HP WBEM TC 1.1.0

HP CPU Consolidated Status Profile (P00107)

HP WBEM TC 1.0.0

HP CPU Physical Asset Profile (P00108)

HP WBEM TC 1.0.0

HP Location Profile (P00124)

HP WBEM TC 1.2.0

Requirements













Schema Supported by the Provider This provider returns instances in the root/hpq namespace.


• SMX_Processor

• SMX_ProcessorCapabilities

• SMX_ProcessorCore

• SMX_HardwareThread

• SMX_ProcessorCacheMemory

• SMX_SystemProcessor

• SMX_ProcessorElementCapabilities

• SMX_ProcessorCoreComponent

• SMX_HWThreadComponent

• SMX_AssociatedCacheMemory

• SMX_ProcessorCollection

• SMX_HostedProcessorCollection

• SMX_MemberOfProcessorCollection

• SMX_ProcessorChip

• SMX_RealizesProcessor

• SMX_SystemPhysicalProcessor

• SMX_ProcessorLocation

• SMX_ProcessorElementLocation

• SMX_SPSFirmware

• SMX_SPSInstalledFirmwareIdentity

• SMX_SPSElementFirmwareIdentity



1-2-1 SMX_Processor Class The SMX_Processor class extends the CIM_Processor class to model the system processors.



CIM_ManagedElement

Caption Processor in <physical locations>

For text representing the CPU location, refer to “Physical Location”.

Description

<processor brand string> (<cpu> Family <x> Model y Stepping <z>)

Where: <processor brand string> is the processor brand string, (<cpu> is the CPU architecture type, <x> is the processor family number, <y> is the processor model number and z is the processor stepping number.

For example:

Intel(R) Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7) Manufacturer: Intel(R) Family: Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7)

ElementName Processor in <physical locations>



Name Processor in <physical locations>


OperationalStatus

0 (Unknown)

2 (OK), when CPU is enabled and operational

5 (Predictive Failure), when IML error info logged for this CPU

6 (Error), when CPU is disabled via POST error

10 (Stopped), when CPU is disabled via RBSU



StatusDescriptions

StatusDescriptions[0] text per OperationalStatus[0]:

Unknown

OK

Error

Stopped

Predictive Failure

HealthState

0 (Unknown), when OperationalStatus[0]=0 (Unknown)

5 (OK), when OperationalStatus[0]=2 (OK)

15 (Minor Failure), when OperationalStatus[0]=10 (Stopped)

20 (Major Failure), when OperationalStatus[0]=5 (Predictive Failure)

25 (Critical Failure), when OperationalStatus[0]=6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

SystemCreationClassName SMX_ComputerSystem

SystemName computer system name

CreationClassName SMX_Processor

DeviceID Proc <n> where n is the processor number.

CIM_Processor

CPUStatus

1 (CPU Enabled)

2 (CPU Disabled by User using BIOS Setup)

3 (CPU Disabled By BIOS (POST Error))

4 (CPU Idle)

7 (Other)

Family Processor family number from SMBIOS

For example, 179 for Intel(R) Xeon(TM)

MaxClockSpeed

maximum clock speed in MHz

For example: 3600

CurrentClockSpeed

current clock speed in MHz

For example: 3066

DataWidth 32 – for x86 processors

64 – for x64 processors / x86_64 processors

AddressWidth 32 – for x86 processors

64 – for x64 processors / x86_64 processors

ExternalBusClockSpeed

external bus clock speed in MHz

For example: 533



Characteristics

For x86 processors:

Characteristics[0]

3 (32-bit Capable)

For x64 processors / x86_64 processors:

Characteristics[0]

3 (32-bit Capable)

Characteristics[1]

2 (64-bit Capable)

NumberOfEnabledCores

Number of enabled and operational cores for this processor

For example: 1, 2, 4

Stepping Stepping for processor

Role Processor Role

UniqueID Unique identifier for processor

HP_Processor

SMX_Processor

1-2-2 SMX_ProcessorCapabilities Class The SMX_ProcessorCapabilities class extends the CIM_ProcessorCapabilities class to model the processor capabilities.



CIM_ManagedElement

Caption Processor Capabilities

Description Processor Capabilities

CIM_Capabilities

InstanceID HPQ:SMX_ProcessorCapabilities:<n>

Where: <n> is a unique number.

ElementName Processor Capabilities

CIM_EnabledLogicalElementCapabilities

ElementNameEditSupported False

RequestedStatesSupported None

CIM_ProcessorCapabilities

NumberOfProcessorCores

number of processor cores

For example: 1, 2, 4

NumberOfHardwareThreads

number of hardware threads

For example: 1, 2

HP_ProcessorCapabilities

VirtualizationTechnologyStatus Value: False–if Intel VT Disabled True – if Intel VT Enabled

SMX_ProcessorCapabilities

1-2-3 SMX_ProcessorCore Class The SMX_ProcessorCore class extends the CIM_ProcessorCore class to model the processor cores.



CIM_ManagedElement

Caption Processor: Core:<c>

Where: is the processor number and <c> is the core number.

Description

<processor brand string> (<cpu> Family <x> Model <y> Stepping <z>) (Processor: Core:<c>)

Where: <processor brand string> is the processor brand string, <cpu> is the CPU architecture type, <x> is processor family number, <y> is processor model number, <z> is processor stepping number, is the processor number, and <c> is the core number.

For example: Manufacturer: Intel(R) Family: Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7) (Processor:1 – Core:2)

ElementName Processor: Core:<c>



Name Processor: Core:<c>


OperationalStatus

0 (Unknown)

StatusDescriptions


Unknown.

OK

Predictive Failure

Error

Stopped

HealthState






CIM_LogicalElement


EnabledState 2 (Enabled), When core is Enabled

3 (Disabled), When core is Disabled



CIM_ProcessorCore

InstanceID HPQ:SMX_ProcessorCore Proc: Core:<c>


CoreEnabledState 2 (Core Enabled), When core is Enabled

Characteristics

For x86 processors:

Characteristics[0]:

3 (32-bit Capable)

For x64 processors/ x86_64 processors:

Characteristics[0]:

3 (32-bit Capable)

Characteristics[1]:

2 (64-bit Capable)

HP_ProcessorCore

Bootstrap FALSE

TRUE

SMX_ProcessorCore

1-2-4 SMX_HardwareThread Class The SMX_HardwareThread class extends the CIM_HardwareThread class to model the hardware threads.



CIM_ManagedElement

Caption

Processor: Core:<c> Thread:<t>

Where: is the processor number, <c> is the core number, and <t> is the thread number

Description

<processor brand string> (<cpu> Family <x> Model <y> Stepping <z> Processor: Core:<c> Thread:<t>)

Where: <processor brand string> is the processor brand string, (<cpu> is the cpu architecture type, <x> is the processor family number, <y> is the processor model number and <z> is the processor stepping number, is the processor number, <c> is the core number, and <t> is the thread number.

For example:

Intel(R) Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7) Manufacturer: Intel(R) Family: Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7) (Processor:1 Core:2 Thread:3)

ElementName




Name



OperationalStatus

0 (Unknown)





StatusDescriptions


Unknown, when OperationalStatus is 0

OK, when OperationalStatus is 2

Predictive Failure, when OperationalStatus is 5

Error, when OperationalStatus is 6

Stopped, when OperationalStatus is 10

HealthState






CIM_LogicalElement


EnabledState 2 (Enabled), When core is Enabled




CIM_HardwareThread

InstanceID

HPQ:SMX_HardwareThread: Proc: Core:<c> Thread:<t>

Where: is the processor number, <c> is the core number and <t> is the thread number

HP_HardwareThread

SMX_HardwareThread

1-2-5 SMX_CacheMemory Class The SMX_CacheMemory class implements the HP_CacheMemory class, which extends CIM_Memory to model the processor caches.



CIM_ManagedElement

Caption

Level <x> Data Cache where <x> is the cache level number

Level <x> Instruction Cache where <x> is the cache level number

Level <x> Unified Cache where <x> is the cache level number

For example: Level 1 Data Cache Level 2 Unified Cache

Description





ElementName




OperationalStatus

0 (Unknown)





StatusDescriptions


Unknown

OK

Stopped

Error

Predictive Failure

HealthState






CIM_LogicalElement




CIM_LogicalDevice


SystemName Computer system name

CreationClassName SMX_CacheMemory

DeviceID

Proc , Level <x> <type> Cache

Where: is the processor number, <x> is the cache level number, and <type> is the cache type (Data, Instruction, or Unified)

Proc , Core <c>, Level <x> <type> Cache

Where: is the processor number, <x> is the cache level number, and <type> is the cache type (Data, Instruction, or Unified)

For example: Proc 1, Level 1 Data Cache

For example: Proc 1, Core 2, Level 2 Unified Cache

CIM_StorageExtent

BlockSize 1 – number of bytes in a block

NumberOfBlocks

Number of blocks in this cache

For example: 8192

Primordial False

CIM_Memory

HP_CacheMemory



SMX_ProcessorCacheMemory

1-2-6 SMX_SystemProcessor Class The SMX_SystemProcessor class extends the CIM_SystemDevice class and associates the SMX_ComputerSystem instance and SMX_Processor instances.



CIM_Component

CIM_SystemComponent

CIM_SystemDevice

HP_SystemProcessor

SMX_SystemProcessor


PartComponent References SMX_Processor

1-2-7 SMX_ProcessorElementCapabilities Class The SMX_ProcessorElementCapabilities class extends the CIM_ElementCapabilities class and associates SMX_Processor and SMX_ProcessorCapabilities instances.



CIM_ElementCapabilities

HP_ProcessorElementCapabilities


SMX_ProcessorElementCapabilities

ManagedElement References SMX_Processor

Capabilities References SMX_ProcessorCapabilities

1-2-8 SMX_ProcessorCoreComponent Class The SMX_ProcessorCoreComponent class extends the CIM_ConcreteComponent class and associates an SMX_Processor instance withSMXP_ProcessorCore instances.



CIM_Component

CIM_ConcreteComponent

HP_ProcessorCoreComponent

SMX_ProcessorCoreComponent

GroupComponent References SMX_Processor

PartComponent References SMX_ProcessorCore

1-2-9 SMX_HWThreadComponent Class The SMX_HWThreadComponent class extends the CIM_ConcreteComponent class and associates an SMX_ProcessorCore instance with SMX_HardwareThread instances.



CIM_Component

CIM_ConcreteComponent



HP_HWThreadComponent

SMX_HWThreadComponent

GroupComponent References SMX_ProcessorCore

PartComponent References SMX_HardwareThread

1-2-10 SMX_AssociatedProcessorCacheMemory Class The SMX_AssociatedProcessorCacheMemory class extends the CIM_AssociatedCacheMemory class. The SMX_AssociatedProcessorCacheMemory class associates an SMX_Processor instance with an SMX_CacheMemory instance.



CIM_Dependency

CIM_AssociatedMemory

CIM_AssociatedCacheMemory

Level

0 (Unknown)

1 (Other)

2 (Not Applicable)

3 (Primary)

4 (Secondary)

5 (Tertiary)



WritePolicy

0 (Unknown)

1 (Other)

2 (Write Back)

3 (Write Through)

4 (Varies with Address)

5 (Determination Per I/O)

CacheType

0 (Unknown)

1 (Other)

2 (Instruction)

3 (Data)

4 (Unified)

ReadPolicy

0 (Unknown)

1 (Other)

2 (Read)

3 (Read-Ahead)

4 (Read and Read-Ahead)

5 (Determination Per I/O)



Associativity

0 (Unknown)

1 (Other)

2 (Direct Mapped)

3 (2-way Set-Associative)


5 (Fully Associative)



HP_AssociatedCacheMemory

SMX_AssociatedProcessorCacheMemory

Antecedent References SMX_CacheMemory

Dependent References SMX_Processor

1-2-11 SMX_ProcessorCollection Class The SMX_ProcessorCollection class extends the HP_GroupSystemSpecificCollection class.



CIM_ManagedElement

Description A collection of processor packages with group aggregate status

ElementName SMX_ProcessorCollection

CIM_Collection




InstanceID HPQ:SMX_ProcessorCollection-1


Caption Processor Package Collection


GroupOperationalStatus[0] contains the processors consolidated status. GroupOperationalStatus[0] will contain one of the following:

0 (Unknown)

1 (Other)

2 (OK)

3 (Degraded)

5 (Predictive Failure)

6 (Error)

10 (Stopped)

The status values of the processors that make up the overall group operational status are contained in GroupOperationalStatus[1-n]. See the descriptions for OperationalStatus for members of the processor collection for the list of possible values.




GroupStatusDescriptions[0] text per GroupOperationalStatus[0]:

Unknown

Other

OK

Degraded

Predicted Failure

Failed

Stopped

The status descriptions of the processors that make up the overall operational status are contained in OperationalStatus[1-n]. See the descriptions for GroupStatusDescriptions for members of the processor collection for the list of possible values.

HP_ProcessorCollection

SMX_ProcessorCollection

1-2-12 SMX_HostedProcessorCollection Class The SMX_HostedProcessorCollection class extends the HP_GroupHostedCollection class and associates the SMX_ComputerSystem instance with the SMX_ProcessorCollection instance.



CIM_Dependency






SMX_HostedProcessorCollection

Antecedent References SMX_ComputerSystem

Dependent References SMX_ProcessorCollection

1-2-13 SMX_MemberOfProcessorCollection Class The SMX_MemberOfProcessorCollection class extends the CIM_MemberOfCollection class and associates the SMX_ProcessorCollection instance with an SMX_Processor instance.




SMX_MemberOfProcessorCollection

Member References SMX_Processor

Collection References SMX_ProcessorCollection

1-2-14 SMX_ProcessorChip Class The SMX_ProcessorChip class extends the CIM_Chip class to model the physical processor chip.



CIM_ManagedElement




Name Processor in <physical locations>


OperationalStatus

0 (Unknown)





StatusDescriptions


Unknown.

OK

Predicted Failiure

Error

Stopped

HealthState






CIM_PhysicalElement

Tag

<manufacturer string> <family string> <physical_location>

Where: <manufacturer string> is the processor manufacturing name, <family string> is the processor family name string and

<physical location >is the CPU location.


Description

<processor brand string> (<cpu> Family <x> Model <y> Stepping <z>)

Where : <processor brand string> is the processor brand string, <cpu> is the CPU architecture type, <x> is the processor family number, <y> is the processor model number and <z> is the processor stepping number.

For example:

Manufacturer: Intel(R) Family: Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7)

x86 Family 15 Model 2 Stepping 7

CreationClassName SMX_ProcessorChip



Manufacturer

Processor manufacturer string from SMBIOS

For example: Intel

Model Model <y>

Where: <y> is the processor model number

Version

Model <y> Stepping <z>

Where: <y> is the processor model number and <z> is the processor stepping number

PoweredOn False – if CPU is disabled via RBSU or POST error

True – if CPU is enabled

CanBeFRUed True

CIM_PhysicalComponent

RemovalConditions 3 (Removable When Off)

CIM_Chip

HP_ProcessorChip

ProcessorChipRevision Stepping <z>

Where: <z> is the processor stepping number

SMX_ProcessorChip

1-2-15 SMX_RealizesProcessor Class The SMX_RealizesProcessor class extends the CIM_Realizes class and associates SMX_Processor instances with SMX_ProcessorChip instances.



CIM_Dependency

CIM_Realizes

HP_RealizesProcessor

SMX_RealizesProcessor

Antecedent References SMX_ProcessorChip

Dependent References SMX_Processor


1-2-16 SMX_SystemPhysicalProcessor Class The SMX_SystemPhysicalProcessor class extends the CIM_Container class and associates the SMX_ComputerSystemChassis instance with SMX_ProcessorChip instances.



CIM_Component

CIM_Container

HP_SystemPhysicalProcessor

SMX_SystemPhysicalProcessor

GroupComponent References SMX_ComputerSystemChassis

PartComponent References SMX_ProcessorChip

1-2-17 SMX_ProcessorLocation Class The SMX_ProcessorLocation class implements the HP_Location class which extends the class CIM_Location.

For ProLiant systems, processor location is denoted by the use of a slot number designator and a socket number designator. Either value might be zero, depending on the system:

• On older ProLiant systems, the processors are mounted on processor boards that fit in slots in the system. The slot number designator indicates the processor board slot where the processor is located. A socket number designator value of zero indicates one processor is mounted on a processor board. A nonzero socket number designator indicates the multiple processor board sockets where a processor is located.On modern ProLiant systems, processors are mounted in sockets on the system board. When the slot number designator is zero, the processors are located on the system board

For x86 Superdome systems, processor location is denoted by the use of CPU socket number, blade number and enclosure number.



CIM_ManagedElement



Description

<processor brand string> (<cpu> Family <x> Model <y> Stepping <z>)

Where : <processor brand string> is the processor brand string, <cpu> is the CPU architecture type, <x> is the processor family number, <y> is the processor model number and <z> is the processor stepping number.

For example:

Intel(R) Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7) Manufacturer: Intel(R) Family: Xeon(TM) CPU 3.06GHz (x86 Family 15 Model 2 Stepping 7)



CIM_Location

Name

HPQ:SMX_ProcessorLocation:<a> Where: <a> is the slot number

HPQ:SMX_ProcessorLocation: Where: is the socket number

HPQ:SMX_ProcessorLocation:<a:b> Where: <a> is the slot number and is the socket number

For x86 Superdome servers ,

HPQ:SMX_ProcessorLocation:<a-b-c>

Where: <a> is the enclosure number, is the blade number and <c> is

the socket number.

PhysicalPosition

<a> Where: <a> is the slot number (when no socket number exists)

 Where: is the socket number (when no slot number exists)

<a:b> Where: <a> is the slot number and is the socket number

For x86 Superdome servers ,

<a:b:c> Where: <a> is the enclosure number, is the blade number and <c> is the socket number.


HP_Location

ElementLocationTag <physical locations>


ElementLocationTagDesc 14 (Processor Module)

LocationInformation

If only socket number is available:

LocationInformation[0]: Where: is the socket number

If only slot number is available:

LocationInformation[0]:<a> Where: <a> is the slot number

If both socket and slot numbers are available:

LocationInformation[0]:

Where: is the socket number

LocationInformation[1]: <a> Where: <a> is the slot number.

For x86 Superdome system,

LocationInformation[0]:<a>

Where: <a> is the socket number

LocationInformation[1]:

Where: is the blade number

LocationInformation[2]:<c>

Where: <c> is the enclosure number

LocationInfoDesc

If only socket number is available:

LocationInfoDesc[0]: 4 (Socket) indicates that the first element of the LocationInformation array contains the socket number

If only slot number is available:

LocationInfoDesc[0]: 0 (Slot), indicates that the second element of the LocationInformation array contains the slot number

If both socket and slot numbers are available:

LocationInfoDesc[0]: 4(Socket), indicates that the first element of the LocationInformation array contains the socket number LocationInfoDesc[1]: 0 (Slot), indicates that the second element of the LocationInformation array contains the slot number


LocationInfoDesc[0]: 4(Socket), indicates that the first element of the LocationInformation array contains the socket number LocationInfoDesc[1]: 14 (Blade), indicates that the second element of the LocationInformation array contains the blade number

LocationInfoDesc[2]: 7 (Enclosure), indicates that the third



element of the LocationInformation array contains the enclosure number

HP_ProcessorLocation

SMX_ProcessorLocation

1-2-18 SMX_ProcessorElementLocation Class The SMX_ProcessorElementLocation class extends the HP_ElementLocation class and associates SMX_ProcessorChip instances with SMX_ProcessorLocation instances.



CIM_ElementLocation

HP_ElementLocation

SMX_ProcessorElementLocation

Element References SMX_ProcessorChip

PhysicalLocation References SMX_ProcessorLocation

1-2-19 SMX_SPSFirmware Class The SMX_SPSFirmware class implements the HP_SoftwareIdentity class and describes the SPS firmware found on the server.




CIM_ManagedElement

Caption SPS firmware

Description

Description including the Caption and StatusDescriptions.

For example: SPS firmware. StatusDescription

Where: StatusDescription represents the value of StatusDescriptions [0]

ElementName SPS firmware




Description of the status corresponding to the OperationalStatus.

For example: OK;

HealthState 5 (OK)

Name SPS firmware.

CIM_LogicalElement







ClassificationDescriptions SPS firmware

IsEntity TRUE

VersionString The firmware version string



IdentityInfoValue

[0]HPQ:

[1] SPS

1-2-20 SMX_SPSElementFirmwareIdentity Class The SMX_SPSElementFirmwareIdentity class associates the HP_ComputerSystem instance with SMX_SPSFirmware.



Antecedent References SMX_SPSFirmware



1-2-21 SMX_SPSInstalledFirmwareIdentity Class The SMX_SPSInstalledFirmwareIdentity class associates the HP_ComputerSystem instance with the installed SMX_SPSFirmware instance.


InstalledSoftware References SMX_SPSFirmware

1-3 Physical Location The Processor Physical Location is a string representing the physical location of a physical CPU module or chip. This string should represent the physical location of the device with which an end-user can uniquely locate the device. Most of these strings will be represented in customer documentation, silkscreen labels, or hood tags.

The following table lists the properties implemented. Any combination of the following applicable descriptors could be used to better define the device location.

All Systems HPE Integrity Cellular Servers HPE Blade Servers in

C3000/C7000 Enclosures

HPE x86 Superdome Servers

CPUSocket=<socket_num> on System Mainboard

Cabinet=<cell_or_blade_cabinet_num> _

CPUSocket=<socket_num> on System

Mainboard

ProcessorBoard=<board

_num> Cell=<cell_num> Blade=<blade_num> Blade=<blade_num>

System

Mainboard(referring to motherboard)

_ _ Enclosure=<blade_

cabinet_num>

CPUSocket=<socket_num

> on ProcessorBoard=<board_num>

_ _

_

1-4 Provider Indications Indications Generated by the Provider

The SMX CPU Provider generates WBEM indications described in the following sections.


Note These Indications only apply to Proliant Servers. These indications are not supported on x86 Superdome servers.

1-4-1 Common Properties for Provider Indications The following table describes the properties that are common to all of the SMX CPU Provider indications that are implemented for HPE server platforms where available:


CIM_Indication

IndicationIdentifier Unique identifying string generated at the time of indication.

IndicationTime Time of indication.

CIM_AlertIndication

EventTime Time of the event or time of the indication if event time unknown.



HP_AlertIndication

ProviderVersion

Provider Version in the format VV.UU.FF.


NetworkAddresses Contains a list of all the IP addresses of the computer system generating the indication.

OSType On ESX, 39 (VM).




SystemFirmwareVersion Array of firmware versions of the computer system generating the indication.

SystemSerialNumber Serial number of the computer system generating the indication.

SystemProductID Product ID of the computer system generating the indication.

SystemModel Model name of the computer system generating the indication.

SystemGUID Platform GUID of the computer system generating the indication.


1-4-2 HP_DeviceIndication: Processor Failed POST Property Name Property Implementation

CIM_Indication

PerceivedSeverity 4 (Minor)

CIM_AlertIndication

Description CPU Failed Power on Self Test (POST)


EventID 1

EventCategory 2 (Processor)

ProviderName HP Processor

RecommendedActions Replace the failed processor



HP_AlertIndication

Summary CPU Failed Power on Self Test (POST)


1-4-3 HP_DeviceIndication: Processor Disabled by BIOS or EFI Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description CPU has been disabled by BIOS or EFI


EventID 2



RecommendedActions Enable processor via BIOS or EFI

HP_AlertIndication

Summary CPU has been disabled by BIOS or EFI



1-4-4 HP_DeviceIndication: Processor Predicted to fail Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description CPU Predictive Failure Notification


EventID 3



RecommendedActions Replace the failing processor.

HP_AlertIndication

Summary CPU Predictive Failure detected


HPE Insight Manager WBEM Fibre Channel Host Bus Adapter Provider 1

1 HPE Insight Manager WBEM Fibre Channel Host Bus Adapter Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Fibre Channel Host Bus Adapter Profile describes the behavior of Fibre Channel host adapters supporting the SCSI (Fibre Channel Protocol) command set. A Fibre Channel (FC) adapter used in a host system is called a Host Bus Adapter (HBA). An HBA is a physical device that contains one or more Fibre Channel ports. A single system can contain one or more HBAs.



SNIA SMI-S FC HBA Profile, Host book Storage Networking Industry Association (SNIA)

1.4.0 r1

HP FC HBA Profile HP WBEM TC 1.0.5

Requirements












1-2 Using the Provider Namespaces Supported by the Provider


This provider returns instances in the root/hpq namespace.


• SMX_FCHBAComputerSystem

• SMX_FCHBAFCPort

• SMX_FCHBAPortController

• SMX_FCHBAFCPortStatistics

• SMX_FCHBALogicalPortGroup

• SMX_FCHBAPhysicalPackage

• SMX_FCHBAProduct

• SMX_FCHBASoftwareIdentityDrv

• SMX_FCHBAFirmwareIdentityFW

• SMX_FCHBAFirmwareIdentityBIOS

• SMX_FCHBAGroupSystemSpecificCollection

• SMX_FCHBAComputerSystemFCPort

• SMX_FCHBAComputerSystemPortController

• SMX_FCHBAPortControllerPCIDevice


• SMX_FCHBAComputerSystemLogicalPortGroup

• SMX_FCHBAComputerSystemSoftwareIdentityDrv

• SMX_FCHBAFCPortFCPortStatistics

• SMX_FCHBAFCPortLogicalPortGroup

• SMX_FCHBAPortControllerFCPort

• SMX_FCHBAPhysicalPackagePortController

• SMX_FCHBASoftwareIdentityDrvPortController

• SMX_FCHBAPortControllerFirmwareIdentityFW

• SMX_FCHBAPortControllerFirmwareIdentityBIOS

• SMX_FCHBAProductPhysicalComponent

• SMX_FCHBASystemPackaging

• SMX_FCHBAGroupHostedCollection

• SMX_FCHBAFCPortGroupSystemSpecific

• SMX_FCHBALocation

• SMX_FCHBAPhysicalElementLocation

• SMX_FCHBASCSIProtocolController

• SMX_FCHBASCSIProtocolEndpoint

• SMX_FCHBAComputerSystemSCSIProtocolController

• SMX_FCHBAFCPortSCSIProtocolEndpoint

• SMX_FCHBASCSIProtocolControllerFCPort

• SMX_FCHBASystemServiceAccessPoint

• SMX_FCHBAConcreteIdentity




1-2-1 SMX_FCHBAComputerSystem SMX_FCHBAComputerSystem is used to idenitfy classes that represent all Fibre Channel ports.


CIM_ManagedElement

Caption Fibre Channel System

ElementName Fibre Channel System


Name GUID

OperationalStatus[0] 0 (Unknown)

2 (OK)

6 (Error)

10 (Stopped)

StatusDescriptions[0] Unknown

OK

Stopped

Error

CIM_LogicalElement



CIM_Systems

CreationClassName SMX_FCHBAComputerSystem

NameFormat Other

CIM_ComputerSystem

Dedicated 0

IdentifyingDescriptions[0] HPQ:GUID

OtherIdentifyingInfo[0] GUID

1-2-2 SMX_FCHBAFCPort Class The SMX_FCHBAFCPort class implements the HPFCHBA_FCPort class is used to represent a FC port device.


Property Name Value

CIM_ManagedElement

ElementName

Fibre Channel Port <port controller number> <-port number>

Where: <FC port controller number> is the associated FC port controller instance number; <-port number> is the FC port number and is only added when the associated FC port controller has multiple FC ports.


Property Name Value

OperationalStatus[0]

0 (Unknown)

2 (OK-Online)

6 (Error)

10 (Stopped)

11 (In Service)


Unknown

OK-Online

Stopped Offline

Stopped Bypassed

Stopped Diagnostics

Stopped Link down

Error

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_FCHBAFCPort

DeviceID Opaque value.

SystemName Opaque value.

SystemCreationClassName SMX_FCHBAComputerSystem


Property Name Value

CIM_LogicalPort

MaxSpeed

Typically one of the following (in Bits per Second):

0

1000000000

2000000000

10000000000

OtherPortType

Unknown

Other

Not present

Fabric

Public Loop

FL Port

Fabric Port

Fabric expansion port

Generic Fabric Port

Private Loop

Point to Point

PortType 1 (Other)

Speed

Typically one of the following (in Bits per Second):

0

1000000000

2000000000

10000000000

UsageRestriction 4 (not restricted)


Property Name Value

CIM_NetworkPort

LinkTechnology 4 (FC)

PermanentAddress Port WWN

PortNumber Port number.

SupportedMaximumTransmissionUnit Port maximum frame size.

1-2-3 SMX_FCHBAPortController Class The SMX_FCHBAPortController class represents a logical device corresponding to a hardware network port controller.


Property Name Value

CIM_ManagedElement

ElementName Product Name


Name NodeWWN

CIM_LogicalElement





CIM_LogicalDevice

Property Name Value

CreationClassName SMX_FCHBAPortController

DeviceID

Node WWN:SerialNumber:<instanceNum>

Where: <instanceNum> is the port controller instance number for the same adapter.


SystemName Opaque

CIM_Controller

CIM_PortController

ControllerType 4 (FC)

1-2-4 SMX_FCHBAFCPortStatistics Class The SMX_FCHBAFCPortStatistics class represents statistics for a FC port. .

The following table lists the properties implemented and the HBAAPI_PORTSTATISTICS prefix refers to the HBA API HBA_PORTSTATISTICS structure. This information comes directly from the HBA and is not altered.

Property Name Value

CIM_ManagedElement

ElementName Product name

CIM_StatisticalData

InstanceID Opaque

SampleInterval 00000000000000.000000:000

CIM_NetworkPortStatistics


Property Name Value

BytesTransmitted HBAAPI_PORTSTATISTICS.TxWords

BytesReceived HBAAPI_PORTSTATISTICS.RxWords

PacketsTransmitted HBAAPI_PORTSTATISTICS.TxFrames

PacketsReceived HBAAPI_PORTSTATISTICS.RxFrames

CIM_FCPortStatistics

CRCErrors HBAAPI_PORTSTATISTICS.InvalidCRCCount

DumpedFrames HBAAPI_PORTSTATISTICS.DumpedFrames

ErrorFrames HBAAPI_PORTSTATISTICS.ErrorFrames

InvalidTransmissionWords HBAAPI_PORTSTATISTICS.InvalidTxWordCount

LinkFailures HBAAPI_PORTSTATISTICS.LinkFailureCount

LIPCount HBAAPI_PORTSTATISTICS.LIPCount

LossOfSignalCounter HBAAPI_PORTSTATISTICS.LossOfSignalCount

LossOfSyncCounter HBAAPI_PORTSTATISTICS.LossOfSyncCount

NOSCount HBAAPI_PORTSTATISTICS.NOSCount

PrimitiveSeqProtocolErrCount HBAAPI_PORTSTATISTICS.PrimitiveSeqProtocolErrCount

1-2-5 SMX_FCHBALogicalPortGroup Class The SMX_FCHBALogicalPortGroup class is a collection of one or more ports logically grouped for administrative and discovery/topology purposes.



Property Name Value

CIM_ManagedElement

Description Grouping of all FC Ports for this HBA

Caption Logical Port Group

ElementName Logical Port Group

CIM_Collection


InstanceID Opaque

CIM_LogicalPortGroup

Name NodeWWN

NameFormat WWN

1-2-6 SMX_FCHBAPhysicalPackage Class The SMX_FCHBAPhysicalPackage class represents the physical elements of the associated FC port controller.


Property Name Value

CIM_ManagedElement


Caption Adapter Name


Name NodeWWN

Property Name Value

OperationalStatus[]

1 (Other)

2 (OK)

3 (Degraded)

6 (Error)

CIM_PhysicalElement

CreationClassName SMX_FCHBAPhysicalPackage

Manufacturer Manufacturer

Model Model


Location; PCI Slot <x>

Where: <x> is the PCI slot number OR PCI Mezzanine=<x> where <x> is the Mexannine slot number.

For x86 Superdome System,

PCI Mezzanine Slot=<x> Blade=<y> Enclosure=<z>

OR

PCI BLOM Slot=<x> Blade=<y> Enclosure=<z>

Where: <x> is the Mezzanine/BLOM slot number. <y> is the blade number. <z> is the enclosure number.

SerialNumber Serial Number

Tag

NodeWWN: <instanceNum>

Where: <instanceNum> is the port controller instance number for the same adapter

Version Board Version or N/A when not available

Property Name Value

CIM_PhysicalPackage


1-2-7 SMX_FCHBAProduct Class The SMX_FCHBAProduct class is used to aggregate physical element of the FC HBA.

The following table lists the properties implemented and the HBAAPI_ADAPTERATTRIBUTES prefix refers to the HBA API HBA_ADAPTERATTRIBUTES structure. This information comes directly for the HBA and is not altered

Property Name Value

CIM_ManagedElement


CIM_Product

IdentifyingNumber HBAAPI_ADAPTERATTRIBUTES.VendorSpecificID

Name

NodeWWN: <instanceNum>


Vendor Manufacturer

Version F/W Version of HBA or N/A when not available

1-2-8 SMX_FCHBASoftwareIdentityDrv Class The SMX_FCHBASoftwareIdentityDrv class represents adapter software associated with the FC port controller.


Property Name Value

Property Name Value

CIM_ManagedElement

Caption FCHBA Driver

Description <Product_Name> Device Driver

Where: <Product_Name> is the product name of the HBA.

ElementName FCHBA Driver


Name NodeWWN

CIM_LogicalElement


ClassificationDescriptions FCHBA Driver

Classifications 2 (Driver)

InstanceID

HPQ:NodeWWN:<instanceNum>



VersionString File version of the Driver.

1-2-9 SMX_FCHBAFirmwareIdentityFW Class The SMX_FCHBAFirmwareIdentityFW class represents adapter firmware associated with the FC port controller.


Property Name Value

Property Name Value

CIM_ManagedElement

Caption FCHBA Firmware

Description FCHBA Firmware details for <Model_Name>

Where: <Model_Name> is the model name of the HBA.

ElementName FCHBA Firmware


Name NodeWWN

CIM_LogicalElement


ClassificationDescriptions FCHBA Firmware

Classifications 10 (firmware)

InstanceID




SerialNumber Serial number

VersionString Firmware version

1-2-10 SMX_FCHBAFirmwareIdentityBIOS Class The SMX_FCHBAFirmwareIdentityBIOS class represents adapter BIOS associated with the FC port controller.

Property Name Value

CIM_ManagedElement

Caption FCHBA Option ROM

Description FCHBA Option ROM detail for <Model_Name>

Where: product name is the Model_Name of the HBA.

ElementName FCHBA Option ROM


Name NodeWWN

CIM_LogicalElement


ClassificationDescriptions FCHBA Option ROM

Classifications 11 (bios/fc)

InstanceID




VersionString BIOS Version as reported by HBA

TargetTypes HBA BIOS UNKNOWN

SerialNumber Serial Number

MajorVersion BIOS MajorVersion as reported by HBA

MinorVersion BIOS MinorVersion as reported by HBA


Property Name Value

RevisionNumber 0

HP_SoftwareIdentity

1-2-11 SMX_FCHBAGroupSystemSpecificCollection Class The SMX_FCHBAGroupSystemSpecificCollection class is used to represent the group status of all FC Ports.


Property Name Value

CIM_ManagedElement

Caption FCHBA Consolidated Status

Description Consolidated status for HPE FC HBAs

ElementName FCHBA Consolidated Status

CIM_Collection


InstanceID Opaque


GroupOperationalStatus[0]

0 (Unknown)

1 (Other)

2 (OK)

3 (Degraded)

6 (Error)

10 (Stopped)


Property Name Value

GroupStatusDescriptions[0]

Unknown

Other

OK

Degraded

Error

Stopped

1-2-12 SMX_FCHBAComputerSystemFCPort Class The SMX_FCHBAComputerSystemFCPort class is used to represent an association between SMX_ComputerSystem and HPFCHBA_FCPort.


Property Name Value

CIM_Component

CIM_SystemDevice

SMX_FCHBAComputerSystemFCPort

GroupComponent Refer to SMX_FCHBAComputerSystem class properties.

PartComponent Refer to SMX_FCHBAFCPort class properties.

1-2-13 SMX_FCHBAComputerSystemPortController Class The SMX_FCHBAComputerSystemPortController class is used to represent an association between SMX_ComputerSystem and SMX_FCHBAPortController.


Property Name Value

CIM_Component


CIM_SystemDevice

SMX_FCHBAComputerSystemPortController

GroupComponent Refer to SMX_FCHBAComputerSystem class properties.

PartComponent Refer to SMX_FCHBAPortController class properties.

1-2-14 SMX_FCHBAPortControllerPCIDevice Class The SMX_FCHBAPortControllerPCIDevice class is used to represent an association between SMX_PCIDevice and SMX_FCHBAPortController.


Property Name Value

CIM_ConcreteIdentity

SMX_FCHBAPortControllerPCIDevice

SystemElement Refer to SMX_PCIDevice class properties.

SameElement Refer to SMX_FCHBAPortController class properties.

1-2-15 SMX_FCHBAComputerSystemLogicalPortGroup Class The SMX_FCHBAComputerSystemLogicalPortGroup class is used to represent an association between SMX_ComputerSystem and SMX_FCHBALogicalPortGroup.


Property Name Value

CIM_Dependency



SMX_FCHBAComputerSystemLogicalPortGroup


Antecedent Refer to SMX_FCHBAComputerSystem class properties.

Dependent Refer to SMX_FCHBALogicalPortGroup class properties.

1-2-16 SMX_FCHBAComputerSystemSoftwareIdentityDrv Class The SMX_FCHBAComputerSystemSoftwareIdentityDrv class is used to represent an association between SMX_ComputerSystem and SMX_FCHBASoftwareIdentityDrv.


Property Name Value

CIM_Component

CIM_SystemDevice

SMX_FCHBAComputerSystemSoftwareIdentityDrv

InstalledSoftware Refer to SMX_FCHBASoftwareIdentityDrv class properties.

System Refer to SMX_FCHBAComputerSystem class properties.

1-2-17 SMX_FCHBAFCPortFCPortStatistics Class The SMX_FCHBAFCPortFCPortStatistics class is used to represent an association between SMX_FCHBAFCPort and SMX_FCHBAFCPortStatistics.


Property Name Value

CIM_ElementStatisticalData

SMX_FCHBAFCPortFCPortStatistics

ManagedElement Refer to SMX_FCHBAFCPort class properties.

Stats Refer to SMX_FCHBAFCPortStatistics class properties.


1-2-18 SMX_FCHBAFCPortLogicalPortGroup Class The SMX_FCHBAFCPortLogicalPortGroup class is used to represent an association between SMX_FCHBAFCPort and SMX_FCHBALogicalPortGroup.


Property Name Value


SMX_FCHBAFCPortLogicalPortGroup

Collection Refer to SMX_FCHBALogicalPortGroup class properties.

Member Refer to SMX_FCHBAFCPort class properties.

1-2-19 SMX_FCHBAPortControllerFCPort Class The SMX_FCHBAPortControllerFCPort is used to represent an association between SMX_FCHBAPortController and SMX_FCHBAFCPort.


Property Name Value

CIM_Dependency

CIM_ControlledBy

SMX_FCHBAPortControllerFCPort

Antecedent Refer to SMX_FCHBAPortController class properties.

Dependent Refer to SMX_FCHBAFCPort class properties.

1-2-20 SMX_FCHBAPhysicalPackagePortController Class The SMX_FCHBAPhysicalPackagePortController class is used to represent an association between SMX_FCHBAPortController and SMX_FCHBAPhysicalPackage.



Property Name Value

CIM_Dependency

CIM_Realizes

SMX_FCHBAPhysicalPackagePortController

Antecedent Refer to SMX_FCHBAPhysicalPackage class properties.

Dependent Refer to SMX_FCHBAPortController class properties.

1-2-21 SMX_FCHBASoftwareIdentityDrvPortController Class The SMX_FCHBASoftwareIdentityDrvPortController class is used to represent an association between SMX_FCHBAPortController and SMX_FCHBASoftwareIdentityDrv.


Property Name Value

CIM_Dependency


SMX_FCHBASoftwareIdentityDrvPortController

Antecedent Refer to SMX_FCHBASoftwareIdentityDrv class properties.


1-2-22 SMX_FCHBAPortControllerFirmwareIdentityFW Class The SMX_FCHBAPortControllerFirmwareIdentityFW class is used to represent an association between SMX_FCHBAPortController and SMX_FCHBAFirmwareIdentityFW.


Property Name Value

CIM_Dependency



SMX_FCHBAPortControllerFirmwareIdentityFW

Antecedent Refer to SMX_FCHBAFirmwareIdentityFW class properties.


1-2-23 SMX_FCHBAPortControllerFirmwareIdentityBIOS Class The SMX_FCHBAPortControllerFirmwareIdentityBIOS class is used to represent an association between SMX_FCHBAPortController and SMX_FCHBAFirmwareIdentityBIOS.


Property Name Value

CIM_Dependency


SMX_FCHBAPortControllerFirmwareIdentityBIOS

Antecedent Refer to SMX_FCHBAFirmwareIdentityBIOS class properties.


1-2-24 SMX_FCHBAProductPhysicalComponent Class The SMX_FCHBAProductPhysicalComponent class is used to represent an association between SMX_FCHBAProduct and SMX_FCHBAPhysicalPackage.


Property Name Value

CIM_Component

CIM_ProductPhysicalComponent

SMX_FCHBAProductPhysicalComponent


Property Name Value

GroupComponent Refer to SMX_FCHBAProduct class properties.

PartComponent Refer to SMX_FCHBAPhysicalPackage class properties.

1-2-25 SMX_FCHBASystemPackaging Class The SMX_FCHBASystemPackaging class is used to represent an association between SMX_FCHBAPhysicalPackage and SMX_ComputerSystem.


Property Name Value

CIM_Dependency

CIM_SystemPackaging

SMX_FCHBASystemPackaging

Antecedent Refer to SMX_FCHBAPhysicalPackage class properties.

Dependent Refer to SMX_FCHBAComputerSystem class properties.

1-2-26 SMX_FCHBAGroupHostedCollection Class The SMX_FCHBAGroupHostedCollection class is used to represent an association between SMX_ComputerSystem and SMX_FCHBAGroupSystemSpecificCollection.


Property Name Value

CIM_Dependency





SMX_FCHBAGroupHostedCollection

Antecedent Refer to SMX_ComputerSystem class properties.

Dependent Refer to SMX_FCHBAGroupSystemSpecificCollection class properties.

1-2-27 SMX_FCHBAFCPortGroupSystemSpecific Class The SMX_FCHBAFCPortGroupSystemSpecific class is used to represent an association between SMX_FCHBAFCPort and SMX_FCHBAGroupSystemSpecificCollection.


Property Name Value

CIM_MemberOfPolicyCollection

SMX_FCHBAFCPortGroupSystemSpecific

Collection Refer to SMX_FCHBAGroupSystemSpecificCollection class properties.

Member Refer to SMX_FCHBAFCPort class properties.

Included

Writeable boolean property indicating if the SMX_FCHBAFCPort instance referenced by Member will contribute status to the SMX_FCHBAGroupSystemSpecificCollection. Property can be modified using the ModifyInstance() intrinsic method.

TRUE—Include member status in collection status

FALSE—Do not include member status in collection status

1-2-28 SMX_FCHBALocation Class The SMX_FCHBALocation class is used to specify the location of the HBA, PCI Slot number.


Property Name Value

CIM_ManagedElement

CIM_Location

Name

NodeWWN:SerialNumber:<instanceNum>

Where: <instanceNum> is the port controller instance number for the same adapter.

HP_Location

ElementLocationTag <physical location>

Refer to “Physical Location” for more information.

ElementLocationTagDesc 1 (slot)

PhysicalPosition <physical location>


LocationInfoDesc

Array of numerical enumerators describing values at comparable index in the LocationInformation array index 1, 2, 3, or 4.

LocationInfoDesc[0] per LocationInformation[0]

PCI Card 3 (PCI Slot)

BLOM on x86 Superdome servers/ Embedded devices

17 (Embedded Device)

Additional enumerators for Cellular servers

10 (Cell if it is an embedded device in a cellular system)

2 (Interconnect Bay)

7 (Cabinet)

6 (Chassis)

Additional enumerators for 14 (Blade)

Property Name Value

HPE BladeSystem servers 1 (Mezzanine)

LocationInformation

Array of text values representing the location components that describe this FC Controller Physical location.

LocationInfoDesc[0] per LocationInfornation[0].

Refer to the LocationInfoDescription array to determine what type of location information is represented.

For x86 Superdome system, LocationInformation[0]:<a>

Where: <a> is the Mezzanine or BLOM slot number





1-2-29 SMX_FCHBAPhysicalElementLocation Class The SMX_FCHBAPhysicalElementLocation is used to represent an association between the SMX_FCHBAPhysicalPackage and SMX_FCHBALocation.


Property Name Value

CIM_ElementLocation

SMX_FCHBAPhysicalElementLocation

Element Refer to SMX_FCHBAPhysicalPackage class properties.


PhysicalLocation Refer to SMX_FCHBALocation class properties.

1-2-30 SMX_FCHBASCSIProtocolController SMX_FCHBASCSIProtocolController represents a protocol controller that manages a SCSI interface. This class is used for backward compatibility with SMI-S 1.0.

Property Name Value

CIM_ManagedElement

ElementName ProductName



OperationalStatus[0] 0 (Unknown)

2 (OK-Online)

6 (Error)

10 (Stopped)

11 (In Service)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_FCHBASCSIProtocolController

DeviceID PortWWN


Property Name Value

SystemName Opaque value


CIM_ProtocolController

MaxUnitsControlled 255

CIM_SCSIProtocolController

1-2-31 SMX_FCHBASCSIProtocolEndpoint SMX_FCHBASCSIProtocolEndpoint represents a SCSI protocol controller running through a part.

Property Name Value

CIM_ManagedElement

ElementName SCSI Protocol Endpoint


Name PortWWN

CIM_LogicalElement




CIM_ServiceAccessPoint

CreationClassName SMX_FCHBASCSIProtocolEndpoint

SystemName Opaque value


Property Name Value


CIM_ProtocolEndpoint

ProtocolIFType 57 (HIPPI Interface)


ConnectionType 2 (fibre channel)

Role 2 (initiator)

1-2-32 SMX_FCHBAComputerSystemSCSIProtocolController SMX_FCHBAComputerSystemSCSIProtocolController is used to represent an association between SMX_FCHBAComputerSystem and SMX_FCHBASCSIProtocolController.

Property Name Value

CIM_Component

CIM_SystemDevice

SMX_FCHBAComputerSystemSCSIProtocolController

GroupComponent ref:SMX_FCHBAComputerSystem

PartComponent ref:SMX_FCHBASCSIProtocolController

1-2-33 SMX_FCHBAFCPortSCSIProtocolEndpoint SMX_FCHBAFCPortSCSIProtocolEndpoint is used to represent an association between SMX_FCHBAFCPort and SMX_FCHBASCSIProtocolEndpoint.

Property Name Value


Property Name Value

CIM_Dependency

CIM_DeviceSAPImplementation

SMX_FCHBAFCPortSCSIProtocolEndpoint

Antecendent ref:SMX_FCHBAFCPort

Dependent ref:SMX_FCHBASCSIProtocolEndpoint

1-2-34 SMX_FCHBASCSIProtocolControllerFCPort SMX_FCHBASCSIProtocolControllerFCPort is used to represent an association between SMX_FCHBASCSIProtocolController and SMX_FCHBAFCPort.

Property Name Value

CIM_Dependency

CIM_ProtocolControllerForDevice

CIM_ProtocolControllerFCPort

SMX_FCHBASCSIProtocolControllerFCPort

Antecendent ref:SMX_FCHBASCSIProtocolController

Dependent ref:SMX_FCHBAFCPort

1-2-35 SMX_FCHBASystemServiceAccessPoint SMX_FCHBASystremServiceAccessPoint is used to represent an association between SMX_FCHBAComputerSystem and SMX_FCHBASCSIProtocolEndpoint.

Property Name Value

CIM_Dependency


Property Name Value


CIM_HostedAccessPoint

SMX_FCHBASysteServiceAccessPoint

Antecendent ref:SMX_FCHBAComputerSystem

Dependent ref:SMX_FCHBASCSIProtocolEndpoint

1-2-36 SMX_FCHBAConcreteIdentity SMX_FCHBAConcreteIdentity is used to represent an association between SMX_ComputerSystem and SMX_FCHBAComputerSystem.

Property Name Value

CIM_LogicalIdentity


SMX_FCHBAConcreteIdentity

SystemElement ref:SMX_ComputerSystem

SameElement ref:SMX_FCHBAComputerSystem

1-3 Physical Location The Physical Location is a string representing the physical location of the Fibre Channel Host Bus Adapter device. This string should represent the physical location of the device with which an end-user can uniquely locate the device. Most of these strings will be represented in customer documentation, silkscreen labels, or hood tags.


All Systems HPE Integrity Cellular

Servers HPE BladeServers in

C3000 / C7000 Enclosures


PCI Slot=<num> Cabinet=<num> Blade=<num>

PCI BLOM Slot=<num>(I/O BLOM slot num)

Or

PCI Mezzanine Slot=<num>(I/O Mezzanine slot num)

Embedded Controller=<logical_ controller_id>

Bay=<num> RootPort=<num> (if embedded on System Board)

Blade=<num>

System Mainboard (referring to System Board/motherboard)

Chassis=<num> Mezzanine=<num> (I/O Mezzanine slot num)

Enclosure=<num>


1-4-1 Fibre Channel Port status changed to Unknown

HP_DeviceIndication: Fibre Channel Port status changed to Unknown

Property name Property implementation

CIM_Indication

IndicationIdentifier Unique identifying string generated at the time of indication





CIM_AlertIndication

Description A fibre channel port has changed to an unknown status.

AlertingManagedElement WBEM Path of SMX_FCHBAFCPort instance

AlertingElementFormat 2 (CIMObjectPath)


EventID 1


ProviderName HP FCHBA

RecommendedActions Check the fibre channel HBA driver and the WMI providers to ensure that the correct versions of this software are installed properly

SystemName Name of the computer system generating the indication

SystemCreationClassName CreationClassName of the computer system generating the indication

HP_AlertIndication

Summary FC HBA port state Unknown

EventCategory 11 (I/O Adapter)


ProbableCauseDescription FC HBA Port State Changed to Unknown

ProviderVersion Provider version generating the indication in the format, <major>.<minor>.<revision>.<build>

NetworkAddresses Contains a list of all the IP addresses (IPv4 and IPv6) of the computer system generating the indication

OSType •

• On ESXi, 39(VM)

•

OSVersion The operating system version of the computer system generating the indication in the format: <major>.<minor>.<build>

SystemFirmwareVersion Firmware version of the computer system generating the indication





ImpactedDomain • 3 (Enclosure) for c-Class blade systems

• 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.

BladeBay * HP_BladeCSLocation.LocationInformation[0]

BladeName * HP_ComputerSystem.Name

EnclosureName * HP_BladeEnclosureCS.Name

RackName * Rack name if one exists

RackUID * Rack Unique Identifier if one exists

SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment

SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment


HP_HardwareIndication

HWFirmwareVersion Controller firmware version string

HWLogicalLocation Controller Location string

For example, Slot 3

HWManufacturer Controller Manufacturer string

HWSerialNumber Controller Serial Number

Ex: FC Controller: <Serial Number>

HP_DeviceIndication

DeviceModel Controller Model string


1-4-2 Fibre Channel Port status changed to OK

HP_DeviceIndication: Fibre Channel Port status changed to OK


CIM_Indication




CIM_AlertIndication

Description This fibre channel HBA port has returned to a status of OK




EventID 2



RecommendedActions No action is recommended






HP_AlertIndication

Summary FC HBA port OK



ProbableCauseDescription FC HBA Port State Changed to OK



OSType •

• On ESXi, 39(VM)

•























For example, Slot 3


Ex:FC Controller: <Serial Number>

HP_DeviceIndication


1-4-3 Fibre Channel Port status changed to Offline

HP_DeviceIndication: Fibre Channel Port status changed to Offline


CIM_Indication




CIM_AlertIndication

Description This fibre channel HBA port has returned to a status of Offline






EventID 3



RecommendedActions Return the fibre channel port to an online state.



HP_AlertIndication

Summary FC HBA port in offine state



ProbableCauseDescription FC HBA Port State Changed to Offline



OSType •

• On ESXi, 39(VM)

•









For example, Slot 3




HP_DeviceIndication


1-4-4 Fibre Channel Port status changed to Bypassed


HP_DeviceIndication: Fibre Channel Port status changed to Bypassed


CIM_Indication




CIM_AlertIndication

Description This fibre channel HBA port has returned to a status of Bypassed




EventID 4



RecommendedActions Re-enable the fibre channel port.



HP_AlertIndication

Summary FC HBA port in bypass state






ProbableCauseDescription FC HBA Port State Changed to Bypass



OSType •

• On ESXi, 39(VM)

•























For example, Slot 3




HP_DeviceIndication





1-4-5 Fibre Channel Port status changed to Diagnostics

HP_DeviceIndication: Fibre Channel Port status changed to Diagnostic


CIM_Indication




CIM_AlertIndication

Description A fibre channel HBA port is operating in a diagnostic state.




EventID 5






RecommendedActions After completion of diagnostics, return this fibre channel port to an online state.



HP_AlertIndication

Summary FC port in diagnostic state



ProbableCauseDescription FC HBA Port State Changed to Diagnostic



OSType •

• On ESXi, 39(VM)

•









For example, Slot 3




HP_DeviceIndication


1-4-6 Fibre Channel Port status changed to Link Down

HP_DeviceIndication: Fibre Channel Port status changed to Link Down


CIM_Indication





PerceivedSeverity 5 (major)


CIM_AlertIndication

Description A fibre channel HBA port has changed to a state of link down




EventID 6



RecommendedActions Check the FC cabling to this port

Reinsert the FC GBIC if it has been unplugged

Replace FC cabling or the FC GBIC if failure continues



HP_AlertIndication

Summary FC HBA port in link down state





ProbableCause 5

ProbableCauseDescription FC HBA Port State Changed to Link Down



OSType •

• On ESXi, 39(VM)

•























For example, Slot 3




HP_DeviceIndication



1-4-7 Fibre Channel Port status changed to Error

HP_DeviceIndication: Fibre Channel Port status changed to Error


CIM_Indication




CIM_AlertIndication

Description A fibre channel port has changed to a failed status.




EventID 7



RecommendedActions Replace the fibre channel HBA card.






HP_AlertIndication

Summary FC HBA port Failed



ProbableCauseDescription FC HBA Port State Changed to Failed



OSType •

• On ESXi, 39(VM)

•























For example, Slot 3







HP_DeviceIndication


1-4-8 Fibre Channel Port status changed to Loopback

HP_DeviceIndication: Fibre Channel Port status changed to Loopback


CIM_Indication


PerceivedSeverity 2 (information)


CIM_AlertIndication

Description A fibre channel port has changed to a loop back state.







EventID 8



RecommendedActions Return the fibre channel port to an online state after loop back testing completes.



HP_AlertIndication

Summary FC HBA port in loopback state



ProbableCauseDescription FC HBA Port State Changed to Loopback



OSType •

• On ESXi, 39(VM)

•









For example, Slot 3




HP_DeviceIndication


1-4-9 HP_AlertIndication: Group System Specific Consolidated Status Policy Change


CIM_Indication




CIM_AlertIndication

Descriptions HP_GroupSystemSpecificConsolidated operational status policy has been modified to monitor operational status from different set of managed elements.

AlertingManagedElement WBEM Path of HP_GroupSystemSpecificCollection instance


AlertType 2 (Model Alert)

EventID 9

ProviderName HP Consolidated Status

RecommendedActions Inspect the members of the collection to discovery whether each managed element status is included in collection operational status.

HP_AlertIndication

Summary Consolidated Status Collection operational status policy has changed

EventCategory 1 (Other)


ProbableCauseDescription This group status policy change is caused by activation or deactivation of Status Propagation Filtering for existing managed elements in HP_GroupSystemSpecificCollection.

EventSubCategory Consolidated Status Policy Change

HP Insight Manager WBEM Host File System Provider Overview 1

1 HP Insight Manager WBEM Host File System Provider Overview

Description

The HP Insight Management Web-Based Enterprise Management (WBEM) Host Filesystem provider and extends CIM classes described in this document to model the filesystems hosted by a managed node. These classes provide computational information and capabilities that serve as an aggregation point to associate one or more elements that make up hosted filesystems and logical disks.


HP Base Server Physical Asset Profile (P00114)

HP WBEM TC 1.1.0

HP Software Inventory (P00127) HP WBEM TC 1.0.1

Requirements


HP ProLiant managed servers

ESXi 5.0 and later





There are no special installation instructions for this provider. It is installed by default as part of the HP Insight Management WBEM providers.


This provider does not accept specific configuration adjustments beyond standard HP Insight Management WBEM support.





• SMX_LocalFileSystem

• SMX_HostedLocalFileSystem

• SMX_LocalLogicalDisk

• SMX_LocalFSResidesOnExtent


Unless otherwise noted, all of the property implementation values given are for HP ProLiant and HP Integrity (cellular and non-cellular) systems. The location related properties and implementation values are determined based on the server type so they may differ.

1-2-1 SMX_LocalFileSystem Class The SMX_LocalFileSystem class implements the CIM_LocalFileSystem class to model the files hosted on the managed node. There is only one instance of SMX_LocalFileSystem for each filesystem on the managed node.



CIM_ManagedElement


CIM_LogicalElement




CIM_FileSystem

CSName SMX_ComputerSystem.Name

CSCreationClassName SMX_ComputerSystem.CreationClassName

CreationClassName SMX_LocalFileSystem

Name Same as Root property.

Root

OS path name to filesystem root location.

For example: /home/users

AvailableSpace Total amount of free space for the filesystem in bytes. Unknown = 0.

BlockSize Read/write data block size in bytes.

FileSystemSize Total size of the filesystem in bytes. Unknown = 0.

FileSystemType

String describing the type of filesystem.

For example: ext2, reiserfs, msdos, vfat, iso0990

NumberOfFiles Number of files contained in the filesystem

CIM_LocalFileSystem

SMX_LocalFileSystem

1-2-2 SMX_HostedLocalFileSystem Class The SMX_HostedLocalFileSystem class implements the CIM_InstalledOS class and associates the SMX_ComputerSystem and the SMX_LocalFileSystem instances.




CIM_HostedFileSystem

SMX_HostedLocalFileSystem

PartComponent References SMX_LocalFileSystem


1-2-3 SMX_LocalLogicalDisk Class The SMX_LocalLogicalDisk class implements the CIM_LogicalDisk class and presents a contiguous range of logical blocks hosted locally on the managed node. These LogicalDisks are identifiable by applications through the Name field, which contains the access path to the logical disk.




CIM_ManagedElement


CIM_LogicalElement


CIM_LogicalDevice



CreationClassName SMX_LocalLogicalDisk

DeviceID

Path to logical disk.

For example: /dev/cdrom1

CIM_StorageExtent


DataOranization

0 (Other)

1 (Unknown)

2 (Fixed Block)

Primordial Can the containing system create or delete this element?

True or False


NumberOfBlocks Number of Blocks on the storage extent.



CIM_LogicalDisk

NameFormat 1 (Other)

12 (OS Device Name)

NameNamespace 1 (Other)

8 (OS Device Namespace)

SMX_LogicalDisk

1-2-4 SMX_LocalFSResidesOnExtent Class The SMX_LocalFSResidesOnExtent class implements the CIM_ResidesOnExtent class and associates the SMX_LocalFileSystem and SMX_LocalLogicalDisk instances.



CIM_ResidesOnExtent

SMX_LocalFSResidesOnExtent

Antecedent References SMX_LocalLogicalDisk

Dependent References SMX_LocalFileSystem

HPE Insight Management WBEM IML Record Log Provider Overview 1

1 HPE Insight Management WBEM IML Record Log Provider Overview

Description The HPE Insight Management Web-Based Enterprise Management (WBEM) Integrated Management Log (IML) provider implements the server management record log.



HP Record Log Profile (P00109)

HP WBEM TC 1.1.0

Requirements


Note: This provider is not supported for x86 Superdome servers.














• SMX_IMLRecordLog

• SMX_IMLLogEntry

• SMX_IMLLogManagesRecord

• SMX_IMLUseOfLog



1-2-1 SMX_IMLRecordLog Class The SMX_IMLRecordLog class implements the HP_CommonRecordLog class to model the server management record log.



CIM_ManagedElement

Caption IML record log

Description Integrated Management Log

ElementName IML record log




Name IML record log

OperationalStatus

OperationalStatus[0] indicates the highest severity of IML log entries and will contain one of the following:

2 (OK), only informational or repaired events exist in the IML log

3 (Degraded), at least one degraded event exists in the IML log

6 (Error), at least one critical event exists in the IML log

StatusDescriptions

StatusDescriptions[0] will contain one of the following corresponding to OperationalStatus[0]:

IML log has no critical or degraded events

IML log has at least one degraded event

IML log has at least one critical event

HealthState


10 (Degraded), when OperationalStatus[0]=3 (Degraded)

20 (Major Failure), when OperationalStatus[0]=6 (Error)

CIM_LogicalElement



RequestedState 5 (No Change)


CIM_Log

MaxNumberOfRecords 0 (Indicates variable length records. There is no maximum number of records in the IML – there will be as many variable length records as will fit in the IML non-volatile memory.)



CurrentNumberOfRecords Number of records in the IML log (SMX_IMLLogEntry instances.)

LogState 2 (Normal)

OverwritePolicy 2 (Wraps When Full) The IML entries will fill up available IML non-volatile memory space until no room is left. The oldest log entries will then be deleted as needed to create room for new log entries.

CIM_RecordLog

InstanceID HPQ:SMX_IMLRecordLog:1

HP_CommonRecordLog


The following table lists the methods implemented for the SMX_IMLRecordLog class.


ClearLog Refer to HP Record Log profile (P00109)

RepairAll Refer to HP Record Log profile (P00109).

1-2-2 SMX_IMLLogEntry Class The SMX_IMLLogEntry class implements the HP_CommonLogEntry class to model logs records within the IML log.

CIM_ManagedElement

Caption

IML record log entry <RecordID>

Where: <RecordID> is the SMX_IMLLogEntry.RecordID for the event.

Description Description based on specific IML log event.

ElementName IML record log entry <RecordID>

Where: RecordID is the SMX_IMLLogEntry.RecordID for the event.

CIM_RecordForLog

CIM_LogEntry

InstanceID HPQ:SMX_IMLLogEntry:<n>

Where: <n> is the IML event number.

LogInstanceID SMX_IMLRecordLog.InstanceID

LogName SMX_IMLRecordLog.Name

RecordID IML event number.

CreationTimeStamp IML log event creation time stamp.

HP_CommonLogEntry

RecordDataType 3 (Delimited)

RawData IML log event raw data.

MajorClass 18 (IML)

MinorClass 2 (None)



UpdateTimestamp IML log event update time stamp.

OccurrenceCount Number of occurrences of this same IML event type.

Severity

0 (Unknown)

2 (Information)

3 (Repaired)

4 (Degraded/Warning)

7 (Critical)

OSType 0 (Unknown)

39 (VMware)


SystemProductID System product ID string from SMBIOS.


SystemName Computer system name

VendorID

0 (Unknown)

3 (HP)

5 (Compaq)

ServerHardwareArchitecture

0 (Unknown)

7 (x86-32)

10 (x86-64)


The following table lists the methods implemented for the SMX_IMLLogEntry class.



Repair Refer to HP Record Log profile (P00109).

1-2-3 SMX_IMLLogManagesRecord Class The SMX_IMLLogManagesRecord class implements the HP_LogManagesRecord class and associates instances of SMX_IMLRecordLog and SMX_IMLLogEntry.




HP_LogManagesRecord

Log References SMX_IMLRecordLog

Record References SMX_IMLLogEntry

1-2-4 SMX_IMLUseOfLog Class The SMX_IMLUseOfLog class implements the HP_UseOfLog class and associates the instance of SMX_ComputerSystem with the instance of SMX_IMLRecordLog.



CIM_Dependency

CIM_UseOfLog

HP_UseOfLog

Antecedent References SMX_IMLRecordLog



1-3 Supported indications There are no indications specific to the profile registration implementation.

HP Insight Management WBEM IPMI Record Log Provider Overview 1

1 HP Insight Management WBEM IPMI Record Log Provider Overview

Description

The HP Insight Management Web-Based Enterprise Management (WBEM) Intelligent Platform Management Interface (IPMI) Record Log provider supports system logs available on HP servers. These logs are called the System Event Log (SEL) and the Forward Progress Log (FPL) and contain informational, warning, and critical event information about a server’s performance and sensors.



HP Record Log Profile (P00109 sample test edit)

HP WBEM TC 1.0.0b

Requirements


HP ProLiant managed servers

ESXi 5.0 and later



Release History • Initial release with HP Insight Management WBEM Providers for Linux v2.0.


There are no special installation instructions for this provider. It is installed by default as part of the HP Insight Management WBEM providers.


This provider does not accept specific configuration adjustments beyond standard HP Insight Management WBEM support.





• SMX_FPLRecordLog

• SMX_FPLLogEntry

• SMX_FPLLogManagesRecord

• SMX_FPLUseOfLog

• SMX_SELRecordLog

• SMX_SELLogEntry

• SMX_SELLogManagesRecord

• SMX_SELRecordLogIndication

• SMX_SELUseOfLog


Unless otherwise noted, all of the property implementation values given are for HP ProLiant and HP Integrity (cellular and non-cellular) systems. The location related properties and implementation values are determined based on the server type so they may differ.

1-2-1 SMX_FPLRecordLog Class The SMX_FPLRecordLog class implements the HP_CommonRecordLog class to model the server management record log.





CIM_ManagedElement

Caption FPL record log

Description Forward Progress Log

ElementName FPL record log


Name FPL record log

OperationalStatus

OperationalStatus[0] indicates whether the FPL log is in good health and accepting new FPL entries.

2 (OK), FPL is operating properly

StatusDescriptions StatusDescriptions[0] will contain the following value corresponding to OperationalStatus[0]:

OK


CIM_LogicalElement





CIM_Log

MaxNumberOfRecords Number of records which will be greater than 0

CurrentNumberOfRecords Number of records in the FPL log (SMX_FPLLogEntry instances)

LogState 2 (Normal)

OverwritePolicy 2 (Wraps When Full) The FPL entries fill up available FPL non-volatile memory space until no room is left. The oldest log entries are then be deleted as needed to create room for new log entries.

CIM_RecordLog

InstanceID HPQ:SMX_FPLRecordLog:1

HP_CommonRecordLog

TimeOfLastChange Time of last log change

The following table lists implemented methods for the SMX_FPLRecordLog class.


ClearLog See the HP Record Log profile.

RepairAll See the HP Record Log profile.

1-2-2 SMX_FPLLogEntry Class The SMX_FPLLogEntry class implements the HP_CommonLogEntry class to model logs records within the FPL log.



CIM_ManagedElement

Caption FPL record log entry <RecordID>

Where: <RecordID> is the SMX_FPLLogEntry.RecordID for the event.

Description Same as Caption.

ElementName Same as Caption.

CIM_RecordForLog

CIM_LogEntry

InstanceID HPQ:<opaque hexadecimal key>

LogInstanceID SMX_FPLRecordLog.InstanceID

LogName SMX_FPLRecordLog.Name

RecordID FPL event number

HP_CommonLogEntry

RawData FPL log event raw data array

MajorClass 11 (FPL)

MinorClass 2 (None)


For example: USE4822L0H


For example: server rx6600


The following table lists implemented methods for the SMX_FPLLogEntry class.


Repair See the HP Record Log profile.

1-2-3 SMX_FPLLogManagesRecord Class The SMX_FPLLogManagesRecord class implements the HP_LogManagesRecord class and associates instances of HP_RecordLog and HP_LogEntry.




HP_LogManagesRecord

Log References SMX_FPLRecordLog

Record References SMX_FPLLogEntry

1-2-4 SMX_FPLUseOfLog Class The SMX_FPLUseOfLog class implements the HP_UseOfLog class and associates the instance of HP_ComputerSystem with the instance of HP_CommonRecordLog.




CIM_Dependency

CIM_UseOfLog

HP_UseOfLog

Antecedent References SMX_FPLRecordLog


1-2-5 SMX_SELRecordLog Class The SMX_SELRecordLog class implements the HP_CommonRecordLog class to model the server management record log.



CIM_ManagedElement

Caption SEL record log

Description System Event Log

ElementName SEL record log


Name SEL record log

OperationalStatus

OperationalStatus[0] indicates whether the SEL log is in good health and accepting new SEL entries.

2 (OK), SEL is operating properly



StatusDescriptions StatusDescriptions[0] will contain the following value corresponding to OperationalStatus[0]:

OK


CIM_LogicalElement





CIM_Log

MaxNumberOfRecords Number of records available in NVRAM. This will be greater than 0

CurrentNumberOfRecords Number of records in the SEL log (not equal to the SMX_SELLogEntry instances as these instances are the sum of both SEL log entries and the SEL cache).

LogState 2 (Normal)

OverwritePolicy 2 (Wraps When Full) The SEL entries fill up available SEL non-volatile memory space until no room is left. The oldest log entries are then be deleted as needed to create room for new log entries.

CIM_RecordLog

InstanceID HPQ:SMX_SELRecordLog:1

HP_CommonRecordLog




The following table lists implemented methods for the SMX_SELRecordLog class.


ClearLog See the HP Record Log profile.

RepairAll See the HP Record Log profile.

1-2-6 SMX_SELLogEntry Class The SMX_SELLogEntry class implements the HP_CommonLogEntry class to model logs records within the SEL log.

CIM_ManagedElement

Caption SEL record log entry <RecordID>

Where: RecordID is the SMX_SELLogEntry.RecordID for the event.



CIM_RecordForLog

CIM_LogEntry

InstanceID HPQ:<opaque hexadecimal key>

LogInstanceID SMX_SELRecordLog.InstanceID

LogName SMX_SELRecordLog.Name

RecordID SEL event number.

HP_CommonLogEntry

RawData SEL log event raw data array

MajorClass 12 (SEL)

MinorClass 2 (None)


For example: USE4822L0H




For example: server rx6600




The following table lists implemented methods for the SMX_SELLogEntry class.


Repair See the HP Record Log Profile.

1-2-7 SMX_SELLogManagesRecord Class The SMX_SELLogManagesRecord class implements the HP_LogManagesRecord class and associates instances of HP_RecordLog and HP_LogEntry.




HP_LogManagesRecord

Log References SMX_SELRecordLog

Record References SMX_SELLogEntry

1-2-8 SMX_SELUseOfLog Class The SMX_SELUseOfLog class implements the HP_UseOfLog class and associates the instance of HP_ComputerSystem with the instance of HP_CommonRecordLog.



CIM_Dependency

CIM_UseOfLog

HP_UseOfLog

Antecedent References SMX_SELRecordLog



1-3 Provider Indications

1-3-1 SMX_SELRecordLogIndication Class The SMX_SELRecordLogIndication class implements and extends the HP_CommonRecordLogIndication class to Alert Clients to to new WBEM events found in the SEL Record log.

The following table describes the properties that are exposed for the SEL Record Log Provider indications that are implemented for server platforms, where available:


CIM_Indication

IndicationIdentifier GUID string generated at the time of indication.


CIM_AlertIndication




HP_AlertIndication


AlertType 1 (Other)

Description Long text description of the event.

EventCategory Any of 30 Supported WBEM Event Categories:

0-9, 11,14,16,18, 20-21, 23,25,28, 33-34, 39, 40-43, 45-46

EventID Valid specific WBEM Event Number.

ProviderName FPL_IndicationProvider



NetworkAddresses Contains a list of all the IP addresses or hostname of the computer system generating the indication.

OSType

OSVersion The operating system version of the computer system generating the indication in the following format: <major>, <minor>, <build>

ProbableCause 0 (Unknown)

ProbableCauseDescription Short text describing cause if known.

RecommendedActions If action exists, this array will contain text values of human readable strings for potential resolution.

Summary Short Text describing the SEL Record Log Event.





SystemVirtualUUID[] If Synergy is enabled, this will contain the logical UUID for the system.

SystemVirtualSerialNumber[] If Synergy is enabled, this will contain the logical Serial Number for the system.

EnclosureName HP_BladeEnclosureCS.Name

RackName Rack name, if one exists

RackUUID Rack Unique Identifier, if one exists

BladeName HP_ComputerSystem.Name, if BladeSystem

BladeBay HP_BladeCSLocation.LocationInformation[0], if BladeSystem

HP_CommonRecordLogIndication

PerceivedSeverity

0 (Unknown)

3 (Degraded/Warning)

6 (Critical)

RecordLogInstanceID Opaque Record Log key.

LogEntryInstanceIDs Array of length 1 containing an opaque Log Entry key.

SMX_SELRecordLogIndication

RawData Array if 14 bytes of raw event data.



VariableNames

Indexed arrays VariableNames[0] per VariableValues[0] per VariableTypes[0], any or all of the following values:

“IPMIEventHex”

“DataFieldTypeName”

“DecodedDataFiled”

“ReportingEntityID”

“ReportingEntityFullName”

“IPMIEventID”

“SWID”

VariableTypes 1

VariableValues

For VariableNames “IPMIEventHex”:

This will be hex string representing the IPMIEvent

For VariableNames “DataFieldTypeName”:

This will contain text Physical Location

For VariableNames “DecodedDataFiled”:

“Physical Location = “ followed by HWPhysicalLocation

For VariableNames “ReportingEntityID”:

Value will contain hex string representing the ReportingEntity

For VariableNames “ReportingEntityFullName”:

Value will be NA

For VariableNames “IPMIEventID”:

Value will contain hex string representation of IPMIEventID

For VariableNames “SWID”:



Value will contain hex string representation of SystemGUID

HWPhysicalLocation

8-Byte Physical Location blob represented as a string

For example: “00-ff-ff-ff-ff-05-ff-64”

HPE Insight Management WBEM Management Processor Lite Provider 1

1 HPE Insight Management WBEM Management Processor Lite Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Management Processor Lite provider extends the management capability of referencing profiles by adding the capability to represent HPE Management Processor on HPE servers.



HP Management Processor (MP) Lite Profile

HP WBEM TC 2.3.0

Requirements













Schema Supported by the Provider This provider supports the following classes:

• SMX_ManagementProcessor

• SMX_MPFirmware

• SMX_MPCollection

• SMX_MPHostedCollection

• SMX_MPComponentCS

• SMX_MPMemberOfCollection

• SMX_MPElementFirmwareIdentity

• SMX_MPInstalledFirmwareIdentity

• SMX_MPConsolidatedStatusView

• SMX_MPScopedConsolidatedStatusView

• SMX_ManagementController

• SMX_MPControllerMP

• SMX_MPControllerPCIDevice



1-2-1 SMX_ManagementProcessor Class The SMX_ManagementProcessor class implements the HP_ManagementProcessor to describe a management processor controller system.


CIM_ManagedElement

Caption

Short Description of the Management Processor, including the product name and the enabled state of the MP.

For example: Product name of the management processor in the format:

<product name> (X)

Where: <product name> is the name of the MP product and (X) indicates whether the MP is Active or Inactive/Disabled.

For example:

Integrated Lights Out 2 (iLO 2) (Active)

Integrated Lights Out 2 (iLO 2) (Inactive)



Remote Insight Board Lights Out Edition II (RILOE-II)

Light Out 100 (LO100) (Active)

Description

Description of the Management Processor, including the product name.

For example: HPE Management Processor - <product name>

Where: <product name> is the name of the MP product.

For example: HPE Management Processor – Integrated Lights Out 2 (iLO 2)

ElementName

Name of the Management Processor, including the product name and the enabled state of the MP.

For example: Product name of the management processor in format: <product name> (X)

Where: <product name> is the name of the MP product. (X)indicates whether the MP is Active or Inactive/Disabled

For example: Integrated Lights Out 2 (iLO 2) (Inactive)



OperationalStatus

Enumerators indicating the Management Processor operational status (refer to OperationalStatus mapping table in HP Management Processor Lite Profile for specific descriptions of when each value is populated).

OperationalStatus[0] contains MP operational status:

0 (Unknown), when NICCondition=0

2 (OK), normal operation

3 (Degraded), when NICCondition=5

6 (Error), when NICCondition=6 or MP software interface fails

OperationalStatus[1] contains NIC status (when MP is enabled):

0 (Unknown), when NICCondition=0 or MP software interface fails


3 (Degraded), when NICCondition=5

6 (Error), when NICCondition=6

10 (Stopped), when NICCondition=3

15 (Dormant), when NICCondition=4

Note:

When a Management Processor is disabled (refer to property EnabledState) OperationalStatus[0] will always report a status of 2 (OK) so as not to contribute negatively to overall system status. An MP is disabled only if the user has manually disabled it via the MP’s RBSU settings; this is seen as a normal condition. In this scenario OperationalStaus[1] is not populated.



StatusDescriptions

Descriptive text per OperationalStatus.


Management Processor Status: Unknown

Management Processor Status: OK

Management Processor Status: Degraded

Management Processor Status: Error


Management Processor NIC Status: Unknown

Management Processor NIC Status: OK

Management Processor NIC Status: NIC disconnected

Management Processor NIC Status: NIC failed

Management Processor NIC Status: NIC is disabled

Management Processor NIC Status: Not in use, MP is utilizing host NIC

HealthState



10 (Degraded/Warning), when OperationalStatus[0]=3 (Degraded)

20 (Major failure), when OperationalStatus[0]=6 (Error)

Note:

When a Management Processor is disabled (refer to property EnabledState) HealthState will always report a state of 5 (OK) so as not to contribute negatively to overall system status. An MP is disabled only if the user has manually disabled it via the MP’s RBSU settings; this is seen as a normal condition.

CIM_LogicalElement




EnabledState

2 (Enabled) for active MP

3 (Disabled) for inactive/disabled MP

Note:

The Active MP may be enabled or disabled (the user can manually disable the MP via RBSU settings). The Inactive MP is always disabled.



CIM_System

CreationClassName SMX_ManagementProcessor

Name Opaque instance identifier using HPQ as the OrgID. For example: HPQ:SMX_ManagementProcessor:1

CIM_ComputerSystem

Dedicated 14 (Management)

ResetCapability 4 (Enabled)

HP_ManagementProcessor



ControllerType

Enumerator indicating the model or type of management processor.

0 (Unknown)

1 (Other)

2 (PCI Board-Remote Insight Lights Out Edition II (RILOE II))

3 (Embedded Integrated Lights Out Controller (iLO))

4 (Embedded Integrated Lights Out Controller 2 (iLO 2))

5 (Embedded Integrity Management Processor)

6 (Embedded Integrity Integrated Lights Out Controller (iLO))

7 (Embedded Integrity Integrated Lights Out Controller 2 (iLO 2))

8(Embedded Lights Out 100 Series (LO 100))

9(Embedded Integrated Lights Out Controller 3 (iLO 3))

10(Embedded Integrity Integrated Lights Out Controller 3 (iLO 3))

11(Embedded Integrity Integrated Lights Out Controller 4 (iLO 4))

OtherControllerType Descriptive text describing the controller type when ControllerType=1 (Other)

HardwareVersion The hardware version of the management processor.

UniqueIdentifier String which uniquely distinguishes the management processor controller from any other MP hardware.



IPAddress

The IP address of the MP-resident network interface.

Note:

When a Management Processor is disabled (refer to property EnabledState) IP Address will always be reported as 0.0.0.0. Network communication with the MP is not possible when the MP is disabled.

URL

The Uniform Resource Locator of the management processor controller’s web-based user interface.

Note:

When a Management Processor is disabled (refer to property EnabledState) URL will always be reported as https://0.0.0.0. Network communication with the MP is not possible when the MP is disabled.

SupportedProtocols An array of values indicating the protocol(s) supported by the management processor controller. It is assumed that any protocol listed is active and can be utilized.

NICCondition

Enumerator indicating the condition of the MP-resident network interface connection.

0 (Unknown)

2 (OK)

3 (NIC disabled)

4 (NIC not in operation-alternate host NIC in use)

5 (NIC in operation but disconnected)

6 (Failed)

Note:

When a Management Processor is disabled (refer to property EnabledState) NICCondition will always report a state of 3 (NIC disabled ). Network communication with the MP is not possible when



the MP is disabled.

ActiveLicense

Enumerator indicating the license type of the Management Processor.

0 (Unknown)

1 (None)

2 (iLO Advanced)

3 (iLO Light)

4 (iLO Advanced for Blade System)

5 (iLO standard for Blade System)

Note:

When communication failure with MP occurs then ActiveLicense is Unknown. If no license present then ActiveLicense is None.

LicenseKey Management Processor License Key

HostName The network hostname in use by this management processorif one is defined

IPv6Address The Link Local IPv6 address of the management processorcontroller’s NIC if one is defined

IPv6SubnetPrefixLengt Describes the prefix length of the Link Local IPv6 Address property in order



h to specify a valid IPv6 subnet

IPv6AddressSource the address source for the IPv6 Link Local address

IPv6CurrentState the current state for the IPv6 Link Local address

Value Map - "0" (Unknown ), "1 " (Active ), "2" (Pending), "3" (Failed)

IPv4Address The IPv4 address of the management processorcontroller’s NIC if one is defined

IPv4SubnetMask The mask for the IPv4 address of the management processorcontroller’s NIC if an IPv4 address is defined

PermanentAddress The permanent network address or MAC that is hard-coded for the management processor controller’s NIC

GatewayIPAddresses[] The IPv4 and IPv6 addresses which define the default IPv4 and/orIPv6 gateways for the management processor

ManagementIPAddresses[]

Array of string reporting the enclosure’s currently management IPv6 Address configured other than Link Local

This may be populated with NULL or an empty string if Management Processor does not support multiple IPv6 Addresses.

IPv6AddressPrefixLengths[ ]

Array of string reporting the prefix length of the corresponding IPv6 address in HP_ManagementIPAddresses[] in order to specify valid subnets.

IPv6AddressSources[ ] Array of string reporting the address source of the corresponding IPv6 Address in ManagementIPAddresses[].

IPv6CurrentStates[ ]

Array of string reporting the current state of the corresponding IPv6 Address in ManagementIPAddresses[].

Value Map - "0" (Unknown ), "1 " (Active ), "2" (Pending), "3" (Failed)

HP_ManagementProcessor


1-2-2 SMX_MPFirmware Class The SMX_MPFirmware class implements the HP_MPFirmware class to describe management processor firmware



CIM_ManagedElement

Caption Short Description of the MP firmware

For example: Management Processor Firmware

Description Description of the MP firmware. For example: HPE Management Processor Firmware

ElementName

Represents the target type/firmware family.

Examples:

RI7 for iLO 2

RI9 for iLO 3

RI10 for iLO 4

Lights Out 100 (LO100)


Name

Product name of the management processor.

Examples:

Integrated Lights Out 2 (iLO 2)

Lights Out 100 (LO100)

OperationalStatus 2 (OK), normal operation

6 (Error), when MP software interface fails

StatusDescriptions Management Processor Firmware Status: OK



HealthState 5 (OK), normal operation

20 (Major failure), when MP software interface fails

CIM_LogicalElement


InstanceID Opaque instance identifier using HPQ as the OrgID. For example: HPQ:SMX_MPFirmware:1

MajorVersion The major version of the MP firmware.

MinorVersion The minor version number of the MP firmware.

VersionString String indicating the MP firmware version information. This property is the string translation of the content provided in the MajorVersion and MinorVersion properties.

Manufacturer Hewlett Packard Enterprise


ClassificationDescriptions HPE Management Processor Firmware

IdentityInfoValue

Indexed array that provides the values described by the type information stored in the corresponding component of the IdentityInfoType array.

For IdentityInfoType CIM:SoftwareFamily, the value will represent the target type/firmware family:

Examples: HPQ:RI7 for ProLiant iLO 2

HPQ:RI9 for ProLiant iLO 3

HPQ:RI10 for ProLiant iLO 4

HPQ:iLO2 for Integrity iLO 2



HPQ:MP for Integrity MP

HPQ:Lights Out 100 (LO100)

IdentityInfoType

Indexed array that provides the Description of the type of information that is stored in the corresponding component of the IdentityInfoValue array.

CIM:SoftwareFamily

ReleaseDate The MP firmware date (in DMTF datetime format).

Example: 20100324000000.000000+000

HP_MPFirmware

1-2-3 SMX_MPCollection Class The SMX_MPCollection class implements the HP_MPCollection class to represent the collection of all management processor controller systems in a computer system and forwards group operational status.



CIM_ManagedElement

Description Description of the class, for example: HPE Management Processor Collection

ElementName

ElementName for the class

For example: Management Processor Collection



CIM_Collection


InstanceID Opaque instance identifier using HPQ as the OrgID.

For example: HPQ:SMX_MPCollection:1


Caption Caption for the class, for example: Management Processor Collection


Describes the group operational status of the management processor collection (refer to HP Management Processor Lite Profile). The group operational status represents the “worst-of” algorithm for all individual MP statuses in HP_ManagementProcessor.OperationalStatus[0].

GroupOperationalStatus[0] contains group operational status:

0 (Unknown)

2 (OK)

3 (Degraded)

6 (Error)


GroupStatusDescriptions[0] text per GroupOperationalStatus[0]:

Aggregate Management Processor Collection Status: Unknown

Aggregate Management Processor Collection Status: OK

Aggregate Management Processor Collection Status: Degraded

Aggregate Management Processor Collection Status: Error

SMX_MPCollection


1-2-4 SMX_MPHostedCollection Class The SMX_MPHostedCollection class implements the HP_MPHostedCollection class, which associates a management processor collection to the scoping computer system.



CIM_Dependency




HP_MPHostedCollection


Dependent References SMX_MPCollection

1-2-5 SMX_MPComponentCS Class The SMX_MPComponentCS class implements the HP_MPComponentCS class to associate a management processor subsystem to the scoping computer system that contains it.



CIM_Component

CIM_SystemComponent

CIM_ComponentCS

HP_MPComponentCS


PartComponent References SMX_ManagementProcessor


1-2-6 SMX_MPMemberOfCollection Class The SMX_MPMemberOfCollection class implements the HP_MPMemberOfCollection class to associate a management processor to the collection to which it belongs.




HP_MPMemberOfCollection

Included

Writeable boolean property indicating if the management processor instance referenced by Member will contribute status to the HP_MPCollection. Property can be modified using the ModifyInstance() intrinsic method.

TRUE—Include member status in collection status

FALSE—Do not include member status in collection status

Collection References SMX_MPCollection

Member References SMX_ManagementProcessor

1-2-7 SMX_MPElementFirmwareIdentity Class The SMX_MPElementFirmwareIdentity class implements the HP_MPElementFirmwareIdentity class to associate a management processor to its corresponding firmware.



CIM_Dependency







6 (Installed)


2 (Current)

HP_MPElementFirmwareIdentity

Antecedent References SMX_MPFirmware

Dependent References SMX_ManagementProcessor

1-2-8 SMX_MPInstalledFirmwareIdentity Class The SMX_MPInstalledFirmwareIdentity class implements the CIM_MPInstalledFirmwareIdentity class to associate a management processor to its corresponding installed firmware.




SMX_MPInstalledFirmwareIdentity

System References SMX_ManagementProcessor

InstalledSoftware References SMX_MPFirmware

1-2-9 SMX_MPConsolidatedStatusView Class HP_ConsolidatedStatusView extends the class CIM_View instances are used to aggregate and model all Consolidated Status information into a instances related to a single subsystem. If consolidated View Classes are implemented, there shall be one instance of HP_ConsolidatedStatusView for each instance of HP_GroupSystemSpecificCollection.



CIM_ManagedElement

Caption Unique name that describes this consolidated status view class instance collection represents.

ElementName Same value as Caption defined above

CIM_View

InstanceID

Opaque instance identifier HPQ as the OrgID

Example:

HPQ:SMX_MPConsolidatedStatusView:1

HP_ConsolidatedStatusView

GroupCreationClassName HP_GroupSystemSpecificCollection.CreationClassName value

GroupCreationOperationalStatus current status value of the HP_GroupSystemSpecificCollection

MemberOperationalStatus[] Status(es) of the members

MemberCreationClassNames[] CIM_ManagedSystemElement.CreationClassName values

MemberStatusIncluded[] Boolean indicating whether the various CIM_ManagedSystemElement Included

MemberObjectPaths[]

Object path references to each CIM_ManagedSystemElement member of this collection

1-2-10 SMX_MPScopedConsolidatedStatusView Class HP_ScopedConsolidatedStatusView extends the class CIM_ScopedView for use with HP_ComputerSystem and HP_ConsolidatedStatusView. There shall be one instance of HP_ScopedConsolidatedStatusView implemented for each HP_ConsolidatedStatusView instance.

.


CIM_ScopedView

HP_ScopedConsolidatedStatusView


Dependent References SMX_MPConsolidatedStatusView

1-2-11 SMX_ManagementController Class The SMX_ManagementController class implements the HP_ManagementController to describe a management controller.



CIM_ManagedElement

Caption

Short Description of the Management Controller, including the product name and the enabled state of the MP.

For example: Product name of the management controller in the format:

<product name> (X)

Where: <product name> is the name of the MP product and (X) indicates whether the MP is Active or Inactive/Disabled.

For example:

Description

Description of the Management Controller, including the product name.

For example: HPE Management Processor Controller - <product name>

Where: <product name> is the name of the MP product.

For example: HPE Management Processor Controller – Integrated Lights Out 2 (iLO 2)

ElementName

Name of the Management Controller, including the product name and the enabled state of the MP.

For example: Product name of the management processor controller in format: <product name> (X)

Where: <product name> is the name of the MP product. (X)indicates whether the MP is Active or Inactive/Disabled

For example: Integrated Lights Out 2 (iLO 2) (Inactive)




OperationalStatus

Enumerators indicating the Management Controller operational status (refer to OperationalStatus mapping table in HP Management Processor Lite Profile for specific descriptions of when each value is populated).

OperationalStatus[0] contains MP operational status:

0 (Unknown),


3 (Degraded),

6 (Error), MP software interface fails

Note:

When a Management Processor is disabled (refer to property EnabledState) OperationalStatus[0] will always report a status of 2 (OK) so as not to contribute negatively to overall system status.



StatusDescriptions

Descriptive text per OperationalStatus.


Management Processor Controller Status: Unknown

Management Processor Controller Status: OK

Management Processor Controller Status: Degraded

Management Processor Controller Status: Error

HealthState




20 (Major failure), when OperationalStatus[0]=6 (Error)

Note:

When a Management Processor is disabled (refer to property EnabledState) HealthState will always report a state of 5 (OK) so as not to contribute negatively to overall system status. An MP is disabled only if the user has manually disabled it via the MP’s RBSU settings; this is seen as a normal condition.

CIM_LogicalElement




EnabledState

2 (Enabled) for active MP

3 (Disabled) for inactive/disabled MP

Note:

The Active MP may be enabled or disabled (the user can manually disable the MP via RBSU settings). The Inactive MP is always disabled.



CIM_LogicalDevice

CreationClassName SMX_ManagementController


SystemName Value of SMX_ComputerSystem.Name property

DeviceID Opaque unique ID for this instance

CIM_Controller

ProtocolSupported 20 (I2C)

CIM_ManagementController

SMX_ManagementController

1-2-12 SMX_MPControllerMP Class The SMX_MPControllerMP class implements the CIM_SystemDevice class to associate a management processor to its corresponding management controller.



CIM_SystemDevice


SMX_MPControllerMP

GroupComponent References SMX_ManagementProcessor

PartComponent References SMX_ManagementController

1-2-13 SMX_MPControllerPCIDevice Class The SMX_MPControllerPCIDevice class implements the CIM_ConcreteIdentity class to associate a management controller to its corresponding PCI Devices.




SMX_MPControllerPCIDevice

SystemElement References SMX_PCIDevice

SameElement References SMX_ManagementController


The following tables describe the SMX WBEM MP Provider indications that are implemented for HP Consolidated Status View.

1-3-1 Provider Indication Common Properties Property Name Property Implementation

CIM_Indication





CIM_AlertIndication




HP_AlertIndication

ProviderVersion





OSVersion The operating system version of the computer system generating the indication in the following format: major.minor.build







SystemVirtualSerialNumber[] If Synergy is enabled, this will contain the logical Serial Number for the

system.

SolutionProductModel

Conditional property containing the Solution Name string when running in a aggregate product environment in the format <aggregate product family name> v<major>.<minor>.<update>


RackName Rack name if one exists

RackUUID Rack Unique Identifier if one exists

BladeName HP_ComputerSystem.Name

BladeBay HP_BladeCSLocation.LocationInformation[0]

1-3-2 HP_AlertStatusIndication: Group System Specific Collection Policy Change The following table describes Mandatory Group System Specific Collection Policy Changed indication. This indication alerts clients to underlying changes in managed element’s state propagation filtering policy and whether those elements participate actively in the OperationalStatus of an HP_GroupSystemSpecificCollection instance. This indication shall be sent in the following cases:

If a managed element’s state propagation filtering policy is changed by altering the association CIM_MemberOfCollection.Included Boolean property


CIM_Indication


CIM_AlertIndication



Description

HP_GroupSystemSpecificConsolidated operational status policy has been modified to monitor operational status from different set of managed elements.

AlertingManagedElement WBEM Path of the HP_GroupSystemSpecificCollection instance



EventID “1”

ProviderName “HP MP”

RecommendedActions

“Inspect property arrays MemberObjectPaths and MemberStatusIncluded to discover new managed elements and whether each managed element status is included in collection operational status.”

HP_AlertIndication

Summary “Consolidated View Class Collection operational status policy has changed “



ProbableCauseDescription

“This group status policy change is a caused by one of two changes:

1. Additional or removal of managed elements to an HP_GroupSystemSpecificCollection

2. Activation or deactivation of State Propagation Filtering for existing managed elements in HP_GroupSystemSpecificCollection.”


1-3-3 HP_AlertStatusIndication: Consolidated Status Changed-OK The following table describes one of the conditional Consolidated Status Changed indications. These Consolidated Status Changed indications shall be implemented if not all managed elements associated to an HP_GroupSystemSpecificCollection support the device status changed indications. If all managed elements of the collection support the device status changed indications, then the Consolidated Status Changed indications should not be implemented. If HP_ConsolidatedStatusView is not implemented, then AlertingManagedElement shall represent the CIM Object Path of the HP_GroupSystemSpecificCollection instance.


CIM_Indication


CIM_AlertIndication

Description

Consolidated View Class Collection operational status has transitioned to OK or participating members in the HP_GroupSystemSpeciticCollection have transitioned to OK.

AlertingManagedElement CIM Object Path of the HP_ConsolidatedStatusView instance if implemented. Otherwise CIM Object Path of the HP_GroupSystemSpecificCollection.



EventID “2”


RecommendedActions None

HP_AlertIndication

Summary “Consolidated View Class Collection operational status has transitioned to OK. “




OtherEventCategory “View Class Status Changed”



“Operational Status of participating members in this collection have transitioned to OK from Degraded or Error state. These Operational Status changes could have also affected the HP_GroupSystemSpecificCollection’s operational status.

1-3-4 HP_AlertStatusIndication: Consolidated Status Changed-Degraded The following table describes one of the conditional Consolidated Status Changed indications. These Consolidated Status Changed indications shall be implemented if not all managed elements associated to an HP_GroupSystemSpecificCollection support the device status changed indications. If all managed elements of the collection support the device status changed indications, then the Consolidated Status Changed indications should not be implemented. If HP_ConsolidatedStatusView is not implemented, then AlertingManagedElement shall represent the CIM Object Path of the HP_GroupSystemSpecificCollection instance.


CIM_Indication

PerceivedSeverity 3 (Degraded)

CIM_AlertIndication

Description

Consolidated View Class Collection operational status has transitioned to Degraded or participating members in the HP_GroupSystemSpeciticCollection are now Degraded or Failed.

AlertingManagedElement CIM Object Path of the HP_ConsolidatedStatusView instance if implemented. Otherwise CIM Object Path



of the HP_GroupSystemSpecificCollection..



EventID “3”


RecommendedActions “Inspect this View Class MemberOperationalStatus, MemberStatusIncluded and MemberObjectPath arrays to indict degraded or failing collection members.”

HP_AlertIndication

Summary “Consolidated View Class Collection operational status has transitioned to Degraded. “





“Operational Status of participating members in this collection have transitioned to Degraded state. These Operational Status changes could have also affected the HP_GroupSystemSpecificCollection’s operational status.”

1-3-5 HP_AlertStatusIndication: Consolidated Status Changed-Error The following table describes one of the conditional Consolidated Status Changed indications. These Consolidated Status Changed indications shall be implemented if not all managed elements associated to an HP_GroupSystemSpecificCollection support the device status changed indications. If all managed elements of the collection support the device status changed indications, then the Consolidated Status Changed indications


should not be implemented. If HP_ConsolidatedStatusView is not implemented, then AlertingManagedElement shall represent the CIM Object Path of the HP_GroupSystemSpecificCollection instance.


CIM_Indication


CIM_AlertIndication

Description Consolidated View Class Collection operational status has transitioned to error.

AlertingManagedElement CIM Object Path of the HP_ConsolidatedStatusView instance if implemented. Otherwise CIM Object Path of the HP_GroupSystemSpecificCollection.



EventID “4”


RecommendedActions “Inspect this View Class MemberOperationalStatus, MemberStatusIncluded and MemberObjectPath arrays to indict failing collection member.”

HP_AlertIndication

Summary “Consolidated View Class Collection operational status has transitioned to Error. “







“Operational Status of participating members in this collection have transitioned to Error state and caused operational status for the for the collection to transition to Error.”

HPE Insight Management WBEM PCI Device Provider Overview 1

1 HPE Insight Management WBEM PCI Device Provider Overview

Description The HPE Insight Management Web-Based Enterprise Management (WBEM) PCI Device provider implements the profiles listed to support PCI devices installed on HPE servers. The following table details the profiles implemented and files installed by this provider.

Implemented Profiles

• DMTF: PCI Device Profile (DSP1075) 1.0.0a 09/2007

• DMTF: Physical Asset Profile

• HP: Location Profile 1.2.0

1-1 Uses Cases Refer to DMTF PCI Device Profile for Use Cases located at: http://www.dmtf.org/standards/profiles.

1-2 Class Implementations The following classes and properties are implemented as specified in the following tables for HPE Server platforms where available. The classes below describe PCI Device.

1-2-1 SMX_PCIDevice Property Name Property Implementation

CIM_ManagedElement

Caption A user-friendly description for this PCI device provided by the operating system.

Description A user-friendly description for this PCI device provided by the operating system.

ElementName A hardware ID and user-friendly description for this PCI device provided by the operating system.

http://www.dmtf.org/standards/profiles




Name A hardware ID and user-friendly description for this PCI device provided by the operating system.

CIM_LogicalDevice

CreationClassName “SMX_PCIDevice”

DeviceID Unique identifier for this PCI device instance.







CIM_PCIController

CIM_PCIDevice

Capabilities Contains the capabilities of the PCI device.

Example: 13 (PCI Express device) 5 (PCI-X capable device)

CapabilityDescriptions Descriptions of capabilities.

ClassCode

Register of 8 bits that identify the basic function of the PCI device. This property is only the upper byte (offset 0Bh) of the 3-byte ClassCode field. Note the ValueMap array of the property specifies the decimal representation of this information.

DomainNumber The domain/segment number where this PCI device resides.

BusNumber The bus number where this PCI device resides.

DeviceNumber The device number assigned to this PCI device for the bus.

FunctionNumber The function number for this PCI device.

PCIDeviceID PCI device ID as described in the configuration registers for this PCI device.

Revision

Revision ID as described in the configuration registers for this PCI device.

(NOTE: The property “Revision” is maintained to keep backwards compatibility)

RevisionID Revision ID as described in the configuration registers for this PCI device.

SubsystemID Subsystem ID as described in the configuration registers for this PCI device.

SubsystemVendorID Subsystem Vendor ID as described in the configuration registers for this PCI device.

VendorID Vendor ID as described in the configuration registers for this PCI device.

HP_PCIDevice

SMX_PCIDevice

SubClassCode

The basic sub-function of the PCI device. Register of 8 bits that identifies with further granularity the subclass of the PCI device. This property is only the middle byte (bit offset 08h) of the 24-bit ClassCode register .The value of the property is interpreted based on the value of the ClassCode byte.

1-2-2 SMX_PCICard Property Name Property Implementation

CIM_ManagedElement

Caption “PCI Card <cardNum>”

Name “PCI Card <cardNum>”

CIM_PhysicalElement

CreationClassName “SMX_PCICard”

Tag “PCI Card <cardNum>”

Description “PCI Card <cardNum>”

ElementName “PCI Card <cardNum>”

CIM_PhysicalPackage


PackageType 9 (Module/Card)

VendorCompatibilityStrings “HPQ:PCICard”

CIM_Card

HostingBoard False

HP_PCICard

1-2-3 SMX_PCISlot Property Name Property Implementation

CIM_ManagedElement

Caption Same as Name.

Name “PCI” <physical location>


CIM_PhysicalElement

CreationClassName “SMX_PCISlot”

Tag Opaque Key. HPQ:SMX_PCISlot:<unique_keys>

Description Same as Name.

ElementName Same as Name.

PoweredOn True – if slot is powered on

False – if slot is not powered

CIM_PhysicalConnector

ConnectorLayout 7 (Slot)

ConnectorPinout

“PCI” – if 33 MHz PCI slot

“PCI-66” – if 66 MHz PCI slot

“PCI-X” – if PCI-X slot

“PCI Express” – if PCI Express slot

“PCI Express Gen2” – if PCI Express Gen2 slot

“PCI Express Gen3” – if PCI Express Gen3 slot

“PCI Express Mezzanine” – if in-blade Mezzanine slot

ConnectorType

43 (PCI) – if this is a 33 MHz PCI slot

80 (PCI-66MHZ) – if this is a 66 MHz PCI slot

98 (PCI-X) – if this is a PCI-X slot

1 (Other) – if this is a PCI Express slot



ConnectorDescription

Only initialized if ConnectorType == 1 (Other):

“PCI Express” – if this is a PCI Express slot

“PCI Express Gen2” – if this is a PCI Express Gen2 slot

“PCI Express Gen3” – if this is a PCI Express Gen3 slot

or

“PCI Express Mezzanine” if mezzanine slot in a blade, otherwise this property is not set

OtherTypeDescription Deprecated in favor of ConnectorDescription

CIM_Slot

Number The physical PCI slot number

SupportsHotPlug True – if slot supports PCI hot plug operations

False – if slot does not support PCI hot plug operations

VendorCompatibilityStrings “HPQ:PCISlot”

HP_PCISlot

1-2-4 SMX_PCICardInSlot Property Name Property Implementation

Antecedent References SMX_PCISlot

Dependent References SMX_PCICard

1-2-5 SMX_RealizesPCIDevice Property Name Property Implementation

Antecedent References SMX_PCICard

Dependent References SMX_PCIDevice

1-2-6 SMX_SystemPCISlot Property Name Property Implementation


PartComponent References SMX_PCISlot

1-2-7 SMX_SystemPCIDevice Property Name Property Implementation


PartComponent References SMX_PCIDevice

1-2-8 SMX_PCISlotLocation Property Name Property Implementation

CIM_ManagedElement

Caption Same as ElementLocationTag.

Description Same as ElementLocationTag.

ElementName Same as ElementLocationTag.

CIM_Location

Name

Unique identifier of the form:

HPQ:SMX_PCISlotLocation: <unique_keys>

For x86 Superdome Systems,

HPQ:SMX_PCISlotLocation: <a-b-c-d-e>”

Where <a> is the enclosure number, is the blade number, <c> is the rootcomplex number, <d> is the rootport number and <e> is the slot number.

PhysicalPosition

Opaque key.

Example for slot 6 in cabinet 1, bay 2 chassis 3 :“01-02-03-FF-FF-06-FF-85”

For Slot 2 in a non-cellular in this system: “FF-FF-FF-FF-FF-02-FF-85”

Example on x86 Superdome systems, for slot 2 in Cabinet 1,Blade 7, Rootcomplex 1, Rootport 7: “01-00-07-01-07-02-FF-84”

HP_Location

ElementLocationTagDesc 0 (Hood Tag)

ElementLocationTag "PCI Slot Location" <physical location>.

LocationInfoDesc

Array of numerical enumerators describing values at comparable index in the LocationInformation array index 1,2, 3, or 4.

LocationInfoDesc[0] per LocationInformation[0] 3 (PCI Slot).

Additional enumerators for Cellular servers

7 (Cabinet) 6 (Chassis)

Additional enumerators for HPE BladeSystem servers

14 (Blade) 1 (Mezzanine)

17 (BLOM on x86 Superdome servers/ Embedded)

LocationInformation

Array of text values representing the location components that describe this PCI Slot location. LocationInfoDesc[0] per LocationInfornation[0].

Cross-reference with LocationInfoDescription array to determine what type of location information is represented


LocationInformation[0]:<a>

Where: <a> is the Mezzanine or BLOM slot number





1-2-9 SMX_PCISlotElementLocation Property Name Property Implementation

Element References SMX_PCISlot



PhysicalLocation References SMX_PCISlotLocation

1-3 Physical Location The Physical Location is a string representing the physical location of any PCI device. This string should represent the physical location of the device from which an end-user can uniquely locate the device. Most of these strings will be visible in customer documentation, silkscreen labels, or hood tags.


All Systems HPE Integrity

Cellular Servers HPE BladeServers in C3000

/ C7000 Enclosures


Slot=<num> Cabinet=<num> Blade=<num>

BLOM Slot=<num>(I/O BLOM slot num)

Or

Mezzanine Slot=<num>(I/O Mezzanine slot num)

Embedded Controller=<logical_controller_id>


Blade=<num>

Mezzanine=<num> Chassis=<num> Mezzanine=<num> (I/O Mezzanine slot num)

Enclosure=<num>


This provider generates no indications.

HPE Insight Management Power Supply Provider Overview 1

1 HPE Insight Management Power Supply Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Power Supply provider implements the HP Power Supply profile to model power supplies in servers.



HP Power Supply Profile

HP WBEM TC 1.3.0 (P103)

HP Location Profile HP WBEM TC 1.2.0 (P124)

HP Power Supply Physical Asset Profile

HP WBEM TC 1.0.2 (P116)

Requirements For each hardware architecture listed, this provider requires the following distributions






Release History

Initial release with HP Insight Management WBEM Providers for Linux v2.0.








• SMX_PowerSupply

• SMX_PowerCollection

• SMX_PowerRedundancySet

• SMX_MemberOfPowerRedundancy

• SMX_HostedPowerRedundancySet

• SMX_MemberOfPowerCollection

• SMX_HostedPowerCollection

• SMX_SystemPowerSupply

• SMX_PowerSupplyLocation

• SMX_PowerSupplyElementLocation

• SMX_PowerSupplyModule

• SMX_SystemPhysicalPowerSupply

• SMX_RealizesPowerSupply

• SMX_PowerMeter

• SMX_AssociatedPowerMeter

• SMX_SystemPowerMeter


• SMX_PowerControllerFirmware

• SMX_PowerControllerInstalledFirmwareIdentity

• SMX_PowerControllerElementFirmwareIdentity



1-2-1 SMX_PowerSupply Class The SMX_PowerSupply class is used to model power supplies on servers. Power supply numbers for existing instances do not change when other power supplies are added and removed.



CIM_ManagedElement

Caption

Short description of this power supply for the name displayed by the MP or iLO and its location.

For example: Power Supply1 at PowerSupplySlot=2, Power Supply 1a at PowerSupplySlot=2

Description

Description of this power supply, including ElementName, PowerSupplyType and StatusDescription[0] and StatusDescription[1].

For example: Elementname provides power for PowerSupplyType.StatusDescription

Where: Elementname represents the value of ElementName,



PowerSupplyType represents the corresponding string value of the PowerSupplyType enumeration, and StatusDescription represents the value of StatusDescriptions[0]and StatusDescription[1].

ElementName





2 (OK) – if power supply is operating properly;

3 (Degraded) – if power supply is degraded;

6 (Error) – if power supply has failed

OperationalStatus[1] Extended Warning and Error status. See the MOF and Profile


Description of the status of the power supply corresponding to the OperationalStatus.

For example: Power Supply is operating properly– if OperationalStatus[0] is 2 (OK);

Power Supply is degraded – if OperationalStatus[0] is 3 (Degraded)

Power Supply has failed – if OperationalStatus is 6 (Error)

StatusDescriptions[1] Description of the extended warning/error status corresponding to the OperationalStatus[1]. See Profile.



HealthState


10 (Degraded) if power supply is degraded

20 (Major Failure) – if power supply has failed

Name

Unique name of this power supply from the name displayed by the MP or iLO and its location.


TimeOfLastStateChange Time that state last changed for power supply. 0 if it has not changed since provider startup.

CIM_LogicalDevice

CreationClassName SMX_PowerSupply

DeviceID Unique identifier for this power supply instance.







CIM_PowerSupply

TotalOutputPower Power reported in Milliwatts .The value 0 denotes ‘unknown’ output power.

HP_PowerSupply



PowerSupplyType Enumeration describing the type of power supply. Refer to the Managed Object Format.

1-2-2 SMX_PowerCollection Class The SMX_PowerCollection class is used to model power supply collections on servers. There is one instance of this class on servers modeling power supplies.



CIM_ManagedElement

Caption Power Collection

Description

This is a collection of all devices including power supplies that provide power. GroupStatusDescription.

Where: GroupStatusDescription represents the value of the GroupStatusDescriptions[0] property.

ElementName Power Collection


InstanceID Unique identifier for this power collection instance





Represents the most severe power redundancy status and non-fault tolerant power supply operational status:

0 (Unknown) – if power collection status is unknown;

2 (OK) – if power supplies are operating properly;

3 (Degraded) – if no SMX_PowerSupply.OperationalStatus[0] for all non-fault tolerant power supplies report 6 (Error) and SMX_PowerRedundancySet.RedundancyStatus for any power redundancy sets report 3 (Degraded Redundancy) or 4 (Redundancy Lost) and no power redundancy sets report 5 (Overall Failure).

6 (Error) – if SMX_PowerSupply.OperationalStatus[0] for any non-fault tolerant power supplies report 6 (Error) or SMX_PowerRedundancySet.RedundancyStatus for any power redundancy sets report 5 (Overall Failure).

Note: The system starts up with a redundancy status set to 4 (Redundancy Lost) and no power supplies have been removed or failed, the GroupOperationalStatus will be set to 2 (OK) because this is a valid configuration.


Unknown status for power supplies - if GroupOperationalStatus[0] is 0 (Unknown);

Power supplies are operating properly if GroupOperationalStatus[0] is 2 (OK);

Power supplies are degraded if GroupOperationalStatus[0] is 3 (Degraded);

Power supplies have failed if GroupOperationalStatus[0] is 6 (Error)

1-2-3 SMX_PowerRedundancySet Class The SMX_PowerRedundancySet class is used to model power supply redundancy sets on servers.



CIM_ManagedElement

Caption

Short description of this redundancy set.

For example: Power Redundancy Set <n>

Where: <n> is the unique identifier for this redundancy set instance.

Description

Description of this redundancy set

For example: Power Redundancy Set <n> is collection of fault tolerant power supplies that provide redundant power


ElementName

User printable name for this power redundancy set.

For example: Power Redundancy Set <n>



InstanceID Unique identifier for this power redundancy instance.

CIM_RedundancySet

MaxNumberSupported Represents the maximum number of power supplies supported for this redundancy set.

MinNumberNeeded Represents the minimum number of power supplies needed to function.

TypeOfSet 3 (Load Balanced)

LoadBalanceAlgorithm 0 (Unknown)



RedundancyStatus

0 (Unknown) – if the redundancy status is unknown;

2 (Fully Redundant) – if the all power supplies in the set are operating properly and enough to achieve redundancy;

3 (Degraded Redundancy) – if there are at least enough power supplies for the redundancy set to provide power, but power supplies have failed;

4 (Redundancy Lost) – if there are not enough power supplies required to achieve redundancy, but enough for the redundancy set to provide power;

5 (Overall Failure) – if there are not enough power supplies operating properly for the redundancy set to provide power.

1-2-4 SMX_MemberOfPowerRedundancy Class The SMX_MemberOfPowerRedundancy class is used to represent an association between HP_PowerSupply and HP_PowerRedundancySet.




Collection References HP_PowerRedundancySet

Included

Writable Boolean property indicating if the power supply instance referenced by Member will contribute status to the HP_PowerCollection. Property can be modified using the ModifyInstance() intrinsic method.

True: Include member status in collection status

False: Do not include member status in collection status

Member References HP_PowerSupply

1-2-5 SMX_HostedPowerRedundancySet Class The SMX_HostedPowerRedundancySet class is used to represent an association between HP_PowerRedundancySet and the computer system that contains this redundancy set.



OwningElement References HP_ComputerSystem

OwnedElement References HP_PowerRedundancySet

1-2-6 SMX_MemberOfPowerCollection Class The SMX_MemberOfPowerCollection class is used to represent an association between the HP_PowerSupply and HP_PowerCollection classes.



Collection References HP_PowerCollection

Included Writable Boolean property indicating if the power supply instance referenced by Member will contribute status to the HP_PowerCollection


True: Include member status in collection status

False: Do not include member status in collection status

Member References HP_PowerSupply

1-2-7 SMX_HostedPowerCollection Class The SMX_HostedPowerCollection class is used to represent an association between the HP_PowerCollection class and the computer system that contains this collection.




Dependent References HP_PowerCollection

1-2-8 SMX_SystemPowerSupply Class The SMX_SystemPowerSupply class is used to represent an association between the HP_PowerSupply class and the computer system that contains this power supply.



GroupComponent References HP_ComputerSystem

PartComponent References HP_PowerSupply

1-2-9 SMX_PowerSupplyLocation Class The SMX_PowerSupplyLocation class is used to model power supply locations on servers.



CIM_ManagedElement

Caption

Name of this power supply from the name displayed by the MP or iLO and its location.

For example: Power Supply1 at PowerSupplySlot=2

Description

Description of this power supply location, including the location.

For example on HPE Proliant: The location of the power supply <n>. Please refer to power supply position <n> printed on the system.

Where: <n> presents the power supply position printed on the system labeling.

ElementName User displayable name of this power supply location, including the location.

For example: Power Supply1 at PowerSupplySlot=2

CIM_Location

Name Unique identifier for this power supply location instance.

PhysicalPosition

Physical position of this Power Supply.

For example on Gen 8 or below HPE Proliant: Number represents the power supply position printed on the system. PhysicalPosition="FF-FF-FF-FF-FF-01-FF-41".

For example on Gen 9 HPE Proliant: Number represents the power supply slot printed on the system. PhysicalPosition="1”.

HP_Location

ElementLocationTag

Location string based on ElementLocationTagDesc.

For example, on HPE Proliant: Power Supply <n>

Where : <n> represents the power supply position printed on the system.



ElementLocationTagDesc On HPE Proliant: 0 (HoodTag)

LocationInfoDesc An array of tags describing the corresponding location path information contained in the LocationInformation property array.

LocationInformation An array of string values describing the location path of a managed element containment hierarchy.

1-2-10 SMX_PowerSupplyElementLocation Class The SMX_PowerSupplyElementLocation class is used to represent an association between the CIM_Location and CIM_ManagedElement classes.



Element Refernces SMX_PowerSupplyModule

PhysicalLocation Refernces SMX_PowerSupplyLocation

1-2-11 SMX_PowerSupplyModule Class The SMX_PowerSupplyModule class is used to model physical power supplies on servers. Power supply numbers for existing instances do not change when other power supplies are added and removed.



CIM_ManagedElement

Caption





Description

Description of this power supply module, including ElementName, Type and Status.

For example: ElementName provides power for PowerSupplyType. StatusDescription

Where: ElementName represents the value of ElementName, PowerSupplyType represents the corresponding string value of the PowerSupplyType enumeration and StatusDescription represents the value of StatusDescriptions[0].

ElementName






3 (Degraded) – if power supply is degraded;

6 (Error) – if power supply has failed


Description of the status of the power supply corresponding to the OperationalStatus.

For example: Power Supply is operating properly – if OperationalStatus[0] is 2 (OK);

Power Supply is degraded – if OperationalStatus[0] is 3 (Degraded)

Power Supply has failed – if OperationalStatus is 6 (Error)

HealthState 5 (OK) – if power supply is operating properly;

10 (Degraded) if power supply is degraded



20 (Major Failure) – if power supply has failed

Name



CIM_PhysicalElement

CreationClassName SMX_PowerSupplyModule

PartNumber The part number assigned by the organization that is responsible for producing or manufacturing the PhysicalElement.

SerialNumber A manufacturer-allocated number used to identify the Physical Element.

Tag Unique identifier for this power supply instance.

CIM_PhysicalPackage

RemovalConditions

0 (Unknown)

3 (Removable when off)

4 (Removable when on or off)

PackageType 6 (PowerSupply)

1-2-12 SMX_SystemPhysicalPowerSupply Class The SMX_SystemPhysicalPowerSupply class extends the CIM_Container class and association of the HP_ComputerSystemChassis instance with HP_PowerSupplyModule.




GroupComponent References HP_ComputerSystemChassis

PartComponent References HP_PowerSupplyModule

1-2-13 SMX_RealizesPowerSupply Class The SMX_RealizesPowerSupply class extends the CIM_Realizes class and associates the HP_PowerSupply instance with HP_PowerSupplyModule instances.




Antecedent References HP_PowerSupplyModule

Dependent References HP_PowerSupply

1-2-14 SMX_PowerSupplySlot Class The SMX_PowerSupplySlot class is used to model physical power supply slots on servers.



CIM_ManagedElement

Caption Short description of this power supply slot.

For example: PowerSupplySlot=2

Description Description of the power supply slot.


ElementName Name of the power supply slot.



OperationalStatus[0] 2 (OK) – if power supply slot is operating properly

StatusDescriptions[0] Power supply slot is operating properly – if OperationalStatus[0] is 2 (OK)

HealthState 5 (OK) – if power supply is operating properly

Name Name of the power supply slot.

CIM_PhysicalElement

CreationClassName SMX_PowerSupplySlot

Tag Unique identifier for this power supply slot.

CIM_PhysicalPackage


Number <n>

Where: <n> represents the number of the power supply slot.

1-2-15 SMX_SystemPowerSupplySlot Class The SMX_SystemPowerSupplySlot class extends the CIM_Container class and association of the HP_ComputerSystemChassis instance with HP_PowerSupplySlot.




PartComponent References HP_PowerSupplySlot

1-2-16 SMX_PowerSupplyInSlot Class The SMX_PowerSupplyInSlot class extends the CIM_ElementInConnector class and associates the HP_PowerSupplySlot instance with HP_PowerSupplyModuleinstances.



Antecedent References HP_PowerSupplySlot


Dependent References HP_PowerSupplyModule

1-2-17 SMX_Power Meter SMX_PowerMeter is used to model power utilization on Servers. Please note: power supply numbers for existing instances do not change when other power supplies are added and removed. Not all systems support reporting power utilization.


CIM_ManagedElement

Caption

Short description of this power utilization sensor using the name of the power supply displayed by the MP or iLO and its location.

For example: Power utilization sensor for Power Supply 1 at PowerSupplySlot=1

Description

Description of this power utilization sensor including the Caption and StatusDescriptions.

For example: Power utilization sensor for Power Supply 1 at PowerSupplySlot=1

Where: StatusDescription represents the value of StatusDescriptions[0]

ElementName

Short description of this power utilization sensor using the name of the power supply displayed by the MP or iLO.

For example: Power utilization sensor for Power Supply 1


OperationalStatus[0] 2 (OK) – if power utilization sensor is operating properly;




Description of the status of the power utilization sensor corresponding to the OperationalStatus.

For example: Power Supply is operating properly – if OperationalStatus[0] is 2 (OK);

HealthState 5 (OK) – if power utilization sensor is operating properly;

Name

Short description of this power utilization sensor using the name of the power supply displayed by the MP or iLO and location.

For example: Power utilization sensor for Power Supply 1 at PowerSupplySlot=1.

CIM_LogicalDevice:

CreationClassName SMX_PowerMeter

DeviceID Unique identifier for this power utilizaton sensor.







CIM_Sensor

SensorType 13 (Power Consumption)

CurrentState “Normal”



PossibleStates Array may contain the following value:

PossibleStates[0] = “Normal”

CIM_NumericSensor

CurrentReading Current reading of the power meter

BaseUnits 7 (Watts)

RateUnits 0 (None)

UnitModifier 0

1-2-18 SMX_SystemPowerMeter SMX_SystemPowerMeter class and associates the HP_ComputerSystem instance with HP_PowerMeter.



PartComponent References HP_PowerMeter

1-2-19 SMX_AssociatedPowerMeter The SMX_AssociatedPowerMeter class associates the HP_PowerSupply instance with HP_PowerMeter instance.


Dependent References SMX_PowerSupply

Antecedent References SMX_PowerMeter

1-2-20 SMX_PowerControllerFirmware SMX_PowerControllerFirmware is used to model power controller firmware on Servers. Not all systems support reporting power controller firmware.



CIM_ManagedElement

Caption Power controller firmware

Description

Description of this power controller including the Caption and StatusDescriptions.

For example: Power controller firmware. StatusDescription

Where: StatusDescription represents the value of StatusDescriptions [0]

ElementName Power controller firmware




Description of the status of the power controller corresponding to the OperationalStatus.

For example: OK;

HealthState 5 (OK)

Name Power controller firmware.

CIM_LogicalElement





ClassificationDescriptions Power controller firmware

IsEntity TRUE

VersionString The firmware version string

MajorVersion The firmware major version number, if any

MinorVersion The firmware minor version number, if any

RevisionNumber The firmware revision number number, if any



IdentityInfoValue

[0]HPQ: PowerPIC-<TargetType value>

Example:

For DL980 G7 or BL620c G7 or BL680c G7 TargetType :PowerPIC-6G7

For G6 TargetType: PowerPIC-Electra

For DL360 G5 TargetType: PowerPIC-Iris-DL360G5

For BL and G5 TargetType: PowerPIC -Iris-Blades

For DL380 G5 TargetType: PowerPIC-Iris-DL380G5

[1] Power Controller

1-2-21 SMX_PowerControllerElementFirmwareIdentity The SMX_PowerControllerElementFirmwareIdentity class associates the HP_ComputerSystem instance with HP_PowerControllerFirmware.



Antecedent References HP_PowerControllerFirmware



1-2-22 SMX_PowerControllerInstalledFirmwareIdentity The SMX_PowerControllerInstalledFirmwareIdentity class associates the HP_ComputerSystem instance with the installed HP_PowrControllerFirmware instance.



InstalledSoftware References HP_PowerControllerFirmware


The following tables describe the SMX WBEM Power Supply Provider indications that are implemented for HPE ProLiant server platforms where available.

HPE Integrity server platforms implement power supply related indications in the SMX IPMI Record Log provider.


CIM_Indication



CIM_AlertIndication


HP_AlertIndication

ProviderVersion













SolutionProductModel Conditional property containing the Solution Name string when running in a aggregate product environment in the format <aggregate product

family name> v<major>.<minor>.<update>


RackName Rack name if one exists

RackUUID Rack Unique Identifier if one exists



1-3-2 HP_DeviceIndication: Power Supply AC Input Loss Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A power supply has failed – input power lost. PowerSupplyCaption

Where: PowerSupplyCaption is the SMX_PowerSupply.Caption for the power supply that has failed

AlertingManagedElement WBEM Path of SMX_PowerSupply instance representing the failed power supply



EventID “9”

ProviderName “HP Power”



RecommendedActions “Check the input power being supplies to the failed power supply and reconnect power.”

HP_AlertIndication

Summary “Power supply failed – input power lost“



ProbableCauseDescription “Power Supply Failed due to input power loss.”

1-3-3 HP_DeviceIndication: Power Supply Removed Property Name Property Implementation

CIM_Indication

PerceivedSeverity 2 (Information)

CIM_AlertIndication

Description A power supply has been removed. PowerSupply

Where: PowerSupply is the system power supply that was removed.

AlertingManagedElement WBEM Path of the SMX_PowerSupply instance.



EventID 1

ProviderName HP Power

RecommendedActions Check the system power supply configuration. Verify that this power



supply was removed intentionally.

HP_AlertIndication

Summary Power supply removed



ProbableCauseDescription Power Supply Removed

1-3-4 HP_DeviceIndication: Power Supply Inserted Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A power supply has been inserted. PowerSupplyCaption

Where: PowerSupplyCaption is the SMX_PowerSupply.Caption for the power supply that has been inserted.

AlertingManagedElement WBEM Path of SMX_PowerSupply instance representing the inserted power supply.



EventID 2





HP_AlertIndication

Summary Power supply inserted



ProbableCauseDescription Power Supply has been Inserted

1-3-5 HP_DeviceIndication: Power Supply Failed Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A power supply has failed. PowerSupplyCaption

Where: PowerSupplyCaption is the SMX_PowerSupply.Caption for the power supply that has failed.

AlertingManagedElement WBEM Path of SMX_PowerSupply instance representing the failed power supply.



EventID 3




RecommendedActions Check the failed power supply and replace if necessary.

HP_AlertIndication

Summary Power supply failed



ProbableCauseDescription Power Supply Failed

1-3-6 HP_DeviceIndication: Power Supply Degraded .


CIM_Indication


CIM_AlertIndication

Description

A power supply has failed. PowerSupplyCaption

Where: PowerSupplyCaption is the SMX_PowerSupply.Caption for the power supply that has degraded.

AlertingManagedElement WBEM Path of SMX_PowerSupply instance representing the degraded power supply.



EventID 20




RecommendedActions Check the degraded power supply and replace if necessary.

HP_AlertIndication

Summary Power supply degraded



ProbableCauseDescription Power supply degraded

1-3-7 HP_DeviceIndication: Power Supply Repaired Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

power supply has been repaired. PowerSupplyCaption

Where: PowerSupplyCaption is the SMX_PowerSupply.Caption for the power supply that has been repaired.

AlertingManagedElement WBEM Path of SMX_PowerSupply instance representing the repaired power supply.



EventID 4





Summary Power supply repaired



ProbableCauseDescription Power supply repaired

1-3-8 HP_DeviceIndication: Power Supply Redundancy Reduced


CIM_Indication


CIM_AlertIndication

Description

A fault tolerant power supply is no longer providing power for a power redundancy set. RedundancySetCaption

Where: RedundancySetCaption represents the SMX_PowerRedundancySet.Caption for the redundancy set with reduced redundancy.

AlertingManagedElement WBEM Path of SMX_PowerRedundancySet instance representing the redundancy set with reduced redundancy.



EventID 5





HP_AlertIndication

Summary Power redundancy reduced


ProbableCause 88 (Loss of Redundancy)

ProbableCauseDescription Power Redundancy has been Reduced

1-3-9 HP_DeviceIndication: Power Supply Redundancy Lost Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

Power redundancy has been lost. RedundancySetCaption

Where: RedundancySetCaption represents the SMX_PowerRedundancySet.Caption for the redundancy set that lost redundancy.

AlertingManagedElement WBEM Path of SMX_PowerRedundancySet.Caption instance representing the redundancy set where redundancy was lost.



EventID 6




RecommendedActions

Check the power supply configuration and check the status of the power redundancy. Ensure the system is being powered adequately. Add or replace power supplies if necessary.

HP_AlertIndication

Summary Power redundancy lost



ProbableCauseDescription Power Redundancy has been Lost

1-3-10 HP_DeviceIndication: Power Supply Redundancy Failed Important: This indication is not supported on HPE Proliant systems since redundancy set failure, which is failure beyond redundancy lost, will cause system shutdown.


CIM_Indication


CIM_AlertIndication

Description

Power redundancy has been lost. RedundancySetCaption

Where: RedundancySetCaption represents the SMX_PowerRedundancySet.Caption for the redundancy set that failed redundancy.

AlertingManagedElement WBEM Path of SMX_PowerRedundancySet instance representing the redundancy set where redundancy failed.





EventID 20


RecommendedActions

Check the power supply configuration and check the status of the power redundancy. Ensure the system is being powered adequately. Add or replace power supplies if necessary.

HP_AlertIndication

Summary Power redundancy set failed



ProbableCauseDescription Power Redundancy Set has Failed

1-3-11 HP_DeviceIndication: Power Supply Redundancy Restored


CIM_Indication


CIM_AlertIndication

Description

Power redundancy for the system has been restored. RedundancySetCaption

Where: RedundancySetCaption is SMX_PowerRedundancySet.Caption of the redundancy set the power redundancy set with restored redundancy.



AlertingManagedElement WBEM Path of SMX_PowerRedundancySet instance representing the power redundancy set with restored redundancy.



EventID 8



HP_AlertIndication

Summary Power redundancy restored



HPE Insight Management WBEM Profile Registration Provider 1

1 HPE Insight Management WBEM Profile Registration Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Management Profile Registration provider extends the management capability of referencing profiles by adding the capability to represent HPE Management Processor on HPE servers. This provider implements the following profiles and installs the necessary files:


HP Profile Registration Profile (P00100)

HP WBEM TC 2.0.0

HP Configuration Data Collection Profile (P00138)

HP WBEM TC 3.0.0

Requirements









Configuring the This provider does not accept specific configuration adjustments beyond standard HPE


Provider Insight Management WBEM support.



• SMX_RegisteredProfile

• SMX_ExtendsProfile

• SMX_ReferencedProfile

• SMX_PRPBaseServerECTP

• SMX_FCPBaseServerECTP

• SMX_SIDataCollection



1-2-1 SMX_RegisteredProfile Class

The SMX_RegisteredProfile class implements the Distributed Management Task Force (DMTF) and Storage Networking Industry Association (SNIA) SMI-S storage profiles.



CIM_ManagedElement

Caption The DMTF Profile table lists the property values for this class.

Description The DMTF Profile table lists the property values for this class.

ElementName The DMTF Profile table lists the property values for this class.

CIM_RegisteredProfile

AdvertiseTypes 3 (SLP)

InstanceID HPQ:<n>

Where: :<n> is a unique number.

OtherRegisteredOrganization

None for DMTF profiles

None for SNIA SMI-S storage profiles. "HP WBEM TC" for HP extension profiles.

RegisteredName The DMTF Profile table lists the property values for this class.

RegisteredOrganization

1 (Other) for HP extension profiles 2 (DMTF) for DMTF profiles

11 (SNIA) for SNIA SMI-S storage profiles

RegisteredVersion The DMTF Profile table lists the property values for this class.

The following table lists all possible DMTF Profiles. Some implementations only support a subset of these profiles so only the subset is reported.

RegisteredName Registered Version Caption/Description/ElementName

Base Server 1.0.0 DMTF Base Server Profile

CPU 1.0.0 DMTF CPU Profile

Fan 1.0.0 DMTF Fan Profile


Power Supply 1.1.0 DMTF Power Supply Profile

System Memory 1.0.0 DMTF System Memory Profile

Physical Asset 1.0.0 DMTF Physical Asset Profile

OS Status 1.0.0 DMTF OS Status Profile

Record Log 1.0.0 DMTF Record Log Profile

Ethernet Port 1.1.0 DMTF Ethernet Port Profile

IP Interface 1.0.1 DMTF IP Interface Profile

Sensors 1.0.1 DMTF Sensors Profile

PCI Device 1.0.0 DMTF PCI Device Profile

Software Inventory 1.0.0 DMTF Software Inventory Profile

Profile Registration 1.0.0 DMTF Profile Registration Profile

The following table lists all possible SNIA Profiles. Some implementations only support a subset of these profiles so only the subset is reported.

RegisteredName Registered

Version Caption/Description/ElementName

Block Services 1.3.0 SNIA Block Services Profile

Disk Drive Lite 1.3.0 SNIA Disk Drive Lite Profile

Extent Composition 1.2.0 SNIA Extent Composition Profile

Disk Sparing 1.3.0 SNIA Disk Sparing Profile

Generic Initiator Ports 1.3.0 SNIA Generic Initiator Ports Profile

DA Target Ports 1.3.0 SNIA DA Target Ports Profile

Indication 1.3.0 SNIA Indication Profile


RegisteredName Registered

Version Caption/Description/ElementName

Host Hardware RAID Controller 1.1.0 SNIA Host Hardware RAID Controller

Profile

FC Initiator Port 1.3.0 SNIA FC Initiator Port Profile

FC HBA 1.3.0 SNIA FC HBA Profile

The following table lists all possible HP WBEM TC Profiles. Some implementations only support a subset of these profiles so only the subset is reported.


HP Base Server 2.0.0 HP Base Server Profile

HP CPU 1.1.0 HP CPU Profile

HP Fan 1.3.0 HP Fan Profile

HP Power Supply 1.3.0 HP Power Supply Profile

HP Memory 1.0.0 HP Memory Profile

HP Base Server Physical Asset 1.4.0 HP Base Server Physical Asset Profile

HP CPU Physical Asset 1.0.0 HP CPU Physical Asset Profile

HP Memory Physical Asset 2.3.0 HP Memory Physical Asset Profile

HP Fan Physical Asset 1.1.0 HP Fan Physical Asset Profile

HP Power Supply Physical Asset 1.0.2 HP Power Supply Physical Asset Profile

HP CPU Consolidated Status 1.0.0 HP CPU Consolidated Status Profile

HP Sensors 1.2.0 HP Sensors Profile

HP Record Log 1.1.0 HP Record Log Profile



HP Software Inventory 2.0.0 HP Software Inventory Profile

HP Blade System Lite 3.2. 0 HP Blade system Lite Profile

HP Management Processor Lite 2.3.0 HP Management Processor Lite Profile

HP FC HBA 1.0.5 HP FC HBA Profile

HP Storage Enclosure 1.0.2 HP Storage Enclosure Profile

HP Profile Registration

2.0.0 HP Profile Registration Profile

HP Smart Array 2.14.2 HP Smart Array Profile

HP SAS HBA 2.0.0 HP SAS HBA Profile

HP SCSI HBA 1.0.1 HP SCSI HBA Profile

HP Configuration Data Collection

3.0.0 HP Configuration Data Collection Profile

1-2-2 SMX_ExtendsProfile Class The SMX_ExtendsProfile class extends the CIM_Dependency class and associates an extension profile registration and the parent profile it extends.



CIM_Dependency

HP_ExtendsProfile

Antecedent References CIM_RegisteredProfile (extended)

Dependent References HP_RegisteredProfile (extends)


1-2-3 SMX_ReferencedProfile Class The SMX_ReferencedProfile class extends the CIM_ ReferencedProfile class and associates an HP profile that references another profile when both are registered in the root\Interop namespace.



CIM_Dependency

SMX_ReferencedProfile

Antecedent References CIM_RegisteredProfile (referenced)

Dependent References CIM_RegisteredProfile (referenced)

1-2-4 SMX_PRPBaseServerECTP Class The SMX_PRPBaseServerECTP class extends the CIM_ElementConformsToProfile class and associates the Base Server registered profile with the HP specific central class that defined the implementation of the profile.



CIM_ElementConformsToProfile

ConformantStandard References CIM_RegisteredProfile

ManagedElement References SMX_ComputerSystem

HP_ElementConformsToProfile

1-2-5 SMX_FCPBaseServerECTP Class The SMX_FCPBaseServerECTP class extends the CIM_ElementConformsToProfile class and associates the Base Server registered profile with the HP specific central class that defined the implementation of the profile.

CIM_ElementConformsToProfile

ConformantStandard References CIM_RegisteredProfile

ManagedElement References SMX_FCHBAComputerSystem

HP_ElementConformsToProfile

1-2-6 SMX_SIDataCollection Class Note: This class is supported only for x86 Superdome servers.


CIM_ManagedElement

ElementName A user-friendly name for each instance

Caption A short textual description (one- line string) of the object.

Description A textual description of the object.

HP_SIDataCollection

InstanceID HPQ:<n>

Where: :<n> is a unique number.

CollectionClassNames Array of names of CIM class to be included in a configuration data collection

CollectionClassNameTypes

Array of tags which describes the type of class name given in CollectionClassNames.

Possible values are Instance/Association



CollectionClassLevels

Array which describes the collection level of the class name given in

CollectionClassNames.

0 (Not collected)

1 (Identification)

2 (Basic collection)

3 (Device assessment)

4 (Problem diagnosis)

1-2-7 SMX_AutoStartProfileRegistration Class Note: This class is supported only for x86 Superdome servers.


SMX_AutoStart

ProviderName Name of the provider which is being started.

This is returned by the provider.

WorkerMethodNameSpace Name space which worker method exists in

WorkerPollInterval Interval in seconds in which WorkerMethod should be called.

A value of zero means no stagger.

WorkerPollIntervalStagger

Worker method to be called by executive with above defined policy.

Return value of zero means sucess. Any other return value denotes failure.

ProviderStartedHostname Hostname provider got when it started.

Used to determine if hostname changed since provider startup so



Executive can force a restart.


SAS HBA Provider Datasheet version 1.05


The following chapters define the supported properties for the SAS HBA provider. For details of each property, see the HP SAS HBA profile (P00122) and associated MOF file.

1-1-1 SMX_SASArraySystem SMX_SASArraySystem represents the top level system. There is one instance per HBA.

Table Error! No text of specified style in document.-1 Class: SMX_SASArraySystem (CIM_ComputerSystem)


CIM_ManagedElement

ElementName Controller name and location For example, HPE 8 INT Port SAS/SATA HBA in Slot 3


OperationalStatus[0] Overall status of the Array System and attached devices. This is calculated as per the algorithm described in the HP SAS HBA Profile. • 0 (Unknown) • 2 (OK) • 3 (Degraded) • 6 (Error)

CIM_LogicalElement





CIM_System

CreationClassName SMX_SASArraySystem

Name Controller Serial Number

NameFormat Other

CIM_ComputerSystem

Dedicated • Dedicated[0]: 3 (Storage) • Dedicated[1]: 15 (Block Server)

IdentifyingDescriptions Other Vendor Specific Name

OtherIdentifyingInfo Controller Serial Number

1-1-2 SMX_SASArrayController SMX_SASArrayController represents the controller. There is one per HBA.

Table Error! No text of specified style in document.-2 Class: SMX_SASArrayController (CIM_ComputerSystem)


CIM_ManagedElement



OperationalStatus[0] Status for Array Controller • 0 (Unknown) • 2 (OK) • 6 (Error)

CIM_LogicalElement





CIM_System

CreationClassName SMX_SASArrayController


NameFormat Other

CIM_ComputerSystem

Dedicated 0 (Not Dedicated)


OtherIdentifyingInfo Controller Serial Number

1-1-3 SMX_SASStorageVolume SMX_SASStorageVolume represents the Logical Volumes configured on the SAS HBA.

Table Error! No text of specified style in document.-3 Class: SMX_SASStorageVolume (CIM_StorageVolume)


CIM_ManagedElement

ElementName Logical drive number with raid description For example, Logical Volume 1 (RAID 1)




Name Concatenation of Vendor + Model + SerialNumber+Logical Drive number For example, HPE+HPE 8 INT Port SAS/SATA HBA+C007760405+LD1

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASStorageVolume

DeviceID Opaque Key

SystemCreationClassName SMX_SASArraySystem

SystemName SMX_SASArraySystem.Name

CIM_StorageExtent

ConsumableBlocks Total Number of blocks on the volume.

BlockSize Block Size in bytes

DataRedundancy • 1 (for RAID 0) • 2 (for RAID 1)

DeltaReservation Set to a value of 0

ExtentStatus[0] This will indicate extended status for the volume. • 2 (None) • 11 (Rebuild – Volume is currently rebuilding data)

IsBasedOnUnderlyingRedundancy False

NoSinglePointOfFailure • True—RAID 1 or above • False—RAID 0

NumberOfBlocks Total Number of blocks on the volume.

PackageRedundancy • 0 (RAID 0) • 1 (RAID 1)

Primordial • TRUE • FALSE (Always set this value to False)

CIM_Storagevolume

NameFormat 7 (SNVM)

SMX_SASStoragevolume



Deleteable See HP SAS HBA Profile

FaultTolerance See HP SAS HBA Profile

OperationalStatus[0] Volume status • 0 (Unknown) • 2 (OK) • 3 (Degraded) - RAID redundancy lost or rebuilding

data • 6 (Error)

OSName Corresponding OS name for this volume

1-1-4 SMX_SASDiskDrive SMX_SASDiskDrive represents the hard drives connected to SAS HBA controllers.

Table Error! No text of specified style in document.-4 Class: SMX_SASDiskDrive (CIM_DiskDrive)


CIM_ManagedElement

ElementName Disk location For example, “Port 1E Box 1 Bay 2” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”


Name SAS Address

OperationalStatus[0] Operational Status for the disk drive • 0 (Unknown) • 2 (OK) • 5 (Predictive Failure) • 6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASDiskDrive

DeviceID Opaque value


Table Error! No text of specified style in document.-4 Class: SMX_SASDiskDrive (CIM_DiskDrive)



CIM_MediaAccessDevice

CIM_DiskDrive

SMX_SASDiskDrive

DriveConfiguration See HP SAS HBA Profile

DriveHasMNPData See HP SAS HBA Profile

DriveInterface See HP SAS HBA Profile

DrivePlacement See HP SAS HBA Profile

DriveRotationalSpeed See HP SAS HBA Profile

Description • Unknown (If neither SAS or SATA) • SAS (If disk drive interface is SAS) • SATA (If disk drive interface is SATA)

NegotiatedDataWidth 0

NegotiatedSpeed 0

SSDTotalPowerOnHours

This value indicates the total number of hours that the Solid State Disk has been powered on. This property will only be available if the controller firmware supports reporting of solid state drive life information.

SSDPercentageEnduranceUsed Percentage of Endurance Used for SSD Wear out Disk

SSDLifeRemaining SSD Life Remaining

SSDWearStatus SSD Wear out Status

SmartDriveCarrierAuthStatus Smart Drive Carrier Authentication Status

1-1-5 SMX_SASStorageExtent SMX_SASStorageExtent represents the consumable storage that is available on a disk drive. There is one instance per disk drive.

Table Error! No text of specified style in document.-5 Class: SMX_SASStorageExtent (CIM_StorageExtent)


CIM_ManagedElement

ElementName Disk location For example, “Port 1E Box 1 Bay 2” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”


Table Error! No text of specified style in document.-5 Class: SMX_SASStorageExtent (CIM_StorageExtent)


Name Serial number of drive

OperationalStatus[0] Operational Status for the disk drive • 0 (Unknown) • 2 (OK) • 5 (Predictive Failure) • 6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASStorageExtent

DeviceID Opaque ID



CIM_StorageExtent

BlockSize Block size in bytes

ConsumableBlocks Total number of blocks on disk drive

ExtentStatus[0] Indicates extended status for the disk drive • 2 (None) • 11 (Rebuild – disk drive is currently rebuilding

data)

NumberOfBlocks Total number of blocks on disk drive

Primordial Set to True

SMX_SASStorageExtent

OSName Corresponding OS name for drives that are not part of RAID set

1-1-6 SMX_SASDiskDriveFirmware SMX_SASDiskDriveFirmware represents the firmware installed on a disk drive. There is one instance per disk drive.

Table Error! No text of specified style in document.-6 Class: SMX_SASDiskDriveFirmware (CIM_SoftwareIdentity)


Table Error! No text of specified style in document.-6 Class: SMX_SASDiskDriveFirmware (CIM_SoftwareIdentity)


CIM_ManagedElement

ElementName TargetType value


Name Disk Drive Firmware

CIM_LogicalElement

Caption Disk Drive Firmware

Description Disk Drive Firmware


ClassificationDescriptions[0] Disk Drive Firmware

Classifications[0] 10 (Firmware)


Manufacturer Disk drive vendor string

IdentityInfoType [0]CIM:SoftwareFamily [1]HPQ:SoftwareCategory

IdentityInfoValue [0]HPQ:<TargetType value> [1]Storage Device

VersionString Drive firmware as reported from SCSI identify command

IsEntity False(always set to False)

SMX_SASDiskDriveFirmware

1-1-7 SMX_SASPhysicalPackage SMX_SASPhysicalPackage represents the overall physical package for the HBA as a whole. There is one instance per HBA.

Table Error! No text of specified style in document.-7 Class: SMX_SASPhysicalPackage (CIM_PhysicalPackage)


CIM_ManagedElement

ElementName Controller name and location

Description Host Based RAID Controller

Table Error! No text of specified style in document.-7 Class: SMX_SASPhysicalPackage (CIM_PhysicalPackage)



CIM_PhysicalElement

CreationClassName SMX_SASPhysicalPackage

Manufacturer HPE

Model Controller model string

PartNumber N/A–Not available for this implementation

SerialNumber Controller Serial Number

Tag HBA Serial number

CIM_PhysicalPackage


SMX_SASPhysicalPackage

1-1-8 SMX_SASDiskPhysicalPackage SMX_SASDiskPhysicalPackage represents the physical aspects of the disk drive. There is one instance per disk drive.

Table Error! No text of specified style in document.-8 Class: SMX_SASDiskPhysicalPackage (CIM_PhysicalPackage)


CIM_ManagedElement

ElementName Disk location, for example,” Port 1E Box 1 Bay: 5” Or Port 1E Device 8 Or “Port 1E Bay 2” Or “Bay 2”


Name Disk location, for example, “Port 1E Box 1 Bay: 5” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”

CIM_PhysicalElement

CreationClassName SMX_SASDiskPhysicalPackage

Caption Disk location, for example, Port 1E Box 1 Bay: 5” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”

Manufacturer Drive vendor string

Model Drive model string

PartNumber N/A—Not available in this implementation

SerialNumber Drive serial number

Table Error! No text of specified style in document.-8 Class: SMX_SASDiskPhysicalPackage (CIM_PhysicalPackage)


Tag Controller Serial number (SerialNumber: PhysicalDriveDeviceNumber)

Version N/A—Not available in this implementation

CIM_PhysicalPackage

HotSwappable • TRUE—Drive is hot swappable • FALSE—Drive is not hot swappable

RemovalConditions • 0 (Unknown) • 2 (Not Applicable) • 3 (Removable when off) • 4 (Removable when on or off)

SMX_SASDiskPhysicalPackage

1-1-9 SMX_SASPortController SMX_SASPortController represent the HBA in the host system. There is one instance per HBA.

Table Error! No text of specified style in document.-9 Class: SMX_SASPortController (CIM_PortController)


CIM_ManagedElement

ElementName Controller name and location, for example, HPE 8 INT Port SAS/SATA HBA in Slot 3


CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASPortController

DeviceID Controller serial number



CIM_Controller

CIM_PortController

ControllerType 1 (Other)

Table Error! No text of specified style in document.-9 Class: SMX_SASPortController (CIM_PortController)


OtherControllerType SAS/SATA

SMX_SASPortController

1-1-10 SMX_SASDAPort SMX_SASDAPort represents the front-end port for an HBA in the host system. Direct Attached implies that the array controller is attached to a local bus on the host (for example, PCI).

Table Error! No text of specified style in document.-10 Class: SMX_SASDAPort (CIM_DAPort)


CIM_ManagedElement

ElementName Controller name and location, for example, HPE 8 INT Port SAS/SATA HBA in Slot 3


OperationalStatus[0] Port status • 0 (Unknown) • 2 (OK) • 6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASDAPort

DeviceID Opaque key



CIM_LogicalPort

UsageRestriction 2 (Front-End Only)

CIM_DAPort

PortType 82 (PCI)

SMX_SASDAPort

1-1-11 SMX_SASFirmware

SMX_SASFirmware represents the firmware installed on a SAS HBA controller.

Table Error! No text of specified style in document.-11 Class: SMX_SASFirmware (CIM_SoftwareIdentity)


CIM_ManagedElement

ElementName TargetType value Set to controller model


Name HBA Firmware

CIM_LogicalElement

Caption HBA Firmware

Description HBA Firmware


ClassificationDescriptions[0] HBA Firmware



Manufacturer HPE

IdentityInfoType [0]CIM:SoftwareFamily [1] HPQ:SoftwareCategory

IdentityInfoValue [0]HPQ:<TargetType value> Set to controller model [1]:Storage Controller

VersionString Controller firmware version string

IsEntity False (always set to False)

SMX_SASFirmware

1-1-12 SMX_SASPrimordialPool SMX_SASPrimordialPool represents the total raw storage managed by the array controller that is assigned to Raid volumes.

Table Error! No text of specified style in document.-12 Class: SMX_SASPrimordialPool (CIM_StoragePool)


CIM_ManagedElement

ElementName Controller name and location: pool identifier. For example, HPE 8 INT Port SAS/SATA HBA in Slot 3: Primordial Pool


CIM_LogicalElement

Table Error! No text of specified style in document.-12 Class: SMX_SASPrimordialPool (CIM_StoragePool)


CIM_StoragePool


PoolID Controller serial number

Primordial TRUE

RemainingManagedSpace 0

TotalManagedSpace Total raw space available to controller. This is calculated by summing the total space on all raid drives connected to this controller.

SMX_SASPrimordialPool

1-1-13 SMX_SASPrimordialPoolNoRaid SMX_SASPrimordialPoolNoRaid represents the total raw storage managed by the array controller that is not assigned to raid volumes.

Table Error! No text of specified style in document.-13 Class: SMX_SASPrimordialPoolNoRaid (CIM_StoragePool)


CIM_ManagedElement

ElementName Controller name and location: pool identifier For example, HPE 8 INT Port SAS/SATA HBA in Slot 3: Primordial Pool (No Raid)


CIM_LogicalElement

CIM_StoragePool


PoolID Controller serial number + :NORAID

Primordial TRUE


TotalManagedSpace Total raw space available to controller. This is calculated by summing the total space on all non raid drives connected to this controller.

SMX_SASPrimordialPoolNoRaid

1-1-14 SMX_SASStoragePool SMX_SASStoragePool represents any concrete storage pools created on an array controller. There is one instance per HBA for this implementation.

Table Error! No text of specified style in document.-14 Class: SMX_SASStoragePool (CIM_StoragePool)


CIM_ManagedElement

ElementName Controller name and location: pool identifier For example, HPE 8 INT Port SAS/SATA HBA in Slot 3: Storage Pool


CIM_LogicalElement

CIM_StoragePool


PoolID Controller serial number:1

Primordial FALSE


TotalManagedSpace Total raw space managed by this pool

SMX_SASStoragePool

1-1-15 SMX_SASStorageSetting SMX_SASStorageSetting represents the current raid configuration for a Storage Volume. There is one instance per Storage Volume.

Table Error! No text of specified style in document.-15 Class: SMX_SASStorageSetting (CIM_StorageSetting)


CIM_ManagedElement

ElementName RAID <n>, where <n> is the raid description • RAID 0 • RAID 1

CIM_SettingData


CIM_StorageSetting

ChangeableType 0 (Not Changeable)

DataRedundancyGoal • 1 (RAID 0) • 2 (RAID 1)

DataRedundancyMax • 1 (RAID 0) • 2 (RAID 1)

DataRedundancyMin • 1 (RAID 0) • 2 (RAID 1)

Table Error! No text of specified style in document.-15 Class: SMX_SASStorageSetting (CIM_StorageSetting)


DeltaReservationGoal 0

DeltaReservationMax 0

DeltaReservationMin 0

NoSinglePointOfFailure • FALSE—RAID 0 • TRUE—RAID 1

PackageRedundancyGoal • 0 (RAID 0) • 1 (RAID 1)

PackageRedundancyMax • 0 (RAID 0) • 1 (RAID 1)

PackageRedundancyMin • 0 (RAID 0) • 1 (RAID 1)

SMX_SASStorageSetting

1-1-16 SMX_SASSCSIProtocolEndpoint SMX_SASSCSIProtocolEndpoint represents an access point to storage resources.

Table Error! No text of specified style in document.-16 Class: SMX_SASSCSIProtocolEndpoint (CIM_SCSIProtocolEndpoint)


CIM_ManagedElement



CIM_LogicalElement





CreationClassName SMX_SASSCSIProtocolEndpoint

Name HBA Serial Number




ProtocolIFType 0 (Unknown)

Table Error! No text of specified style in document.-16 Class: SMX_SASSCSIProtocolEndpoint (CIM_SCSIProtocolEndpoint)


CIM_SCSIProtocolEndpoint

ConnectionType 1 (Other)

OtherConnectionType PCI

Role 4 (Both Initiator and Target)

SMX_SASSCSIProtocolEndpoint

1-1-17 SMX_SASSCSIProtocolController SMX_SASSCSIProtocolController represents a view a SCSI resources on the controller.

Table Error! No text of specified style in document.-17 Class: SMX_SASSCSIProtocolController (CIM_SCSIProtocolController)


CIM_ManagedElement



OperationalStatus[0] Operational status of the controller • 0 (Unknown) • 2 (OK) • 6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASSCSIProtocolController

DeviceID Opaque key






SMX_SASSCSIProtocolController

1-1-18 SMX_SASStorageRedundancySet SMX_SASStorageRedundancySet represents disk sparing aspect of a RAID configuration. There is an instance for every raid set that has spare drives configured.

Table Error! No text of specified style in document.-18 Class: SMX_SASStorageRedundancySet (CIM_StorageRedundancySet)


CIM_ManagedElement

ElementName Storage Redundancy Set

CIM_Collection



CIM_RedundancySet

LoadBalanceAlgorithm 2 (No Load Balancing)

MaxNumberSupported 0

MinNumberNeeded 0

RedundancyStatus • 2 (Fully Redundant) • 4 (Redundancy Lost)

TypeOfSet[0] 5 (Limited Sparing)

CIM_StorageRedundancySet

SMX_SASStorageRedundancySet

1-1-19 SMX_SASStorageSpecificCollection SMX_SASStorageSpecificCollection represents a collection of SAS HBA controllers that are grouped together to report consolidated status.

Table Error! No text of specified style in document.-19 Class: SMX_SASStorageSpecificCollection (HP_GroupHostedCollection)


CIM_ManagedElement

Caption SAS HBA Consolidated Status

Description A consolidated OperationalStatus for all HPSAS_ArraySystem instances

ElementName SAS HBA Consolidated Status

CIM_Collection


Table Error! No text of specified style in document.-19 Class: SMX_SASStorageSpecificCollection (HP_GroupHostedCollection)




GroupOperationalStatus Consolidated status for all array controllers. See HP SAS HBA profile for details on how this is calculated

GroupStatusDescriptions Description of GroupOperationalStatus

SMX_SASStorageSpecificCollection

1-1-20 SMX_SASArraySystemLocation SMX_SASArraySystemLocation represents a location string for the HBA.

Table Error! No text of specified style in document.-20 Class: SMX_SASArraySystemLocation (HP_Location)


CIM_ManagedElement

Caption Controller name and location For example, HPE 8 INT Port SAS/SATA HBA in Slot 3

Description Controller name and location For example, HPE 8 INT Port SAS/SATA HBA in Slot 3


CIM_Location

Name Opaque key

PhysicalPosition Opaque key

HP_Location

ElementLocationTag PCI Slot number

ElementLocationTagDesc 23 (Adapter)

LocationInformation PCI Slot number For example, 3—PCI Slot 3

LocationInfoDesc 3 (PCI Slot)

SMX_SASArraySystemLocation

1-1-21 SMX_SASDiskDriveLocation SMX_SASDiskDriveLocation represents a location string for the disk drive.

Table Error! No text of specified style in document.-21 Class: SMX_SASDiskDriveLocation (HP_Location)


CIM_ManagedElement

Caption Disk location For example, “Port 1E Box 1 Bay 2” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”

Description Disk location For example, “Port 1E Box 1 Bay 2” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”

ElementName Disk location For example, “Port 1E Box 1 Bay 2 ” Or “Port 1E Device 8” Or “Port 1E Bay 2” Or “Bay 2”

CIM_Location

Name Opaque key


HP_Location

ElementLocationTag Bay Number or SCSI ID of Disk

ElementLocationTagDesc 20 (Bay) or 21 (SCSI ID)

SMX_SASDiskDriveLocation

1-1-22 SMX_SASStorageCapabilities SMX_SASStorageCapabilities represents the possible capabilities of a Storage Pool.

Table Error! No text of specified style in document.-22 Class: SMX_SASStorageCapabilities (CIM_StorageCapabilities)


CIM_ManagedElement

ElementName • For Primodial Pools Controller name and location, for example, HPE 8 INT Port SAS/SATA HBA in Slot 3 for internal

• For Concrete Pools Controller name and location:Array identifier, for example, HPE 8 INT Port SAS/SATA HBA in Slot 3: Storage Pool for internal

CIM_Capabilities


CIM_StorageCapabilities

Table Error! No text of specified style in document.-22 Class: SMX_SASStorageCapabilities (CIM_StorageCapabilities)


DataRedundancyDefault • 0 (When Pool is NonRAID) • 1 (When number of drives = 1) • 2 (When number of drives > 1) For example, Pool

can be configured for redundancy.

DataRedundancyMax • 0 (When Pool is NonRAID) • 1 (When number of drives = 1) • 2 (When number of drives > 1) For example, Pool

can be configured for redundancy.

DataRedundancyMin • 0 (When Pool is NonRAID) • 1 (No single point of failure RAID)

DeltaReservationDefault 0



ElementType 5 (Storage Pool)

NoSinglePointOfFailure • True—When number of drives > 1 (For example, Pool can be configured for redundancy.)

• False—When number of drives = 1 or Pool is NonRAID

NoSinglePointOfFailureDefault • True—When number of drives > 1 (For example, Pool can be configured for redundancy.)

• False—When number of drives = 1 or Pool is NonRAID

PackageRedundancyDefault • 0 (When Pool is NonRAID) • 1 (When number of drives = 1) • 2 (When number of drives > 1)

PackageRedundancyMax • 0 (When Pool is NonRAID) • 1 (When number of drives = 1) • 2 (When number of drives > 1)

PackageRedundancyMin 0

SMX_SASStorageCapabilities

1-1-23 SMX_SASProduct SMX_SASProduct represents the marketing information for the HBA.

Table Error! No text of specified style in document.-23 Class: SMX_SASProduct (CIM_Product)


CIM_ManagedElement

Table Error! No text of specified style in document.-23 Class: SMX_SASProduct (CIM_Product)


ElementName Controller name and location For example, HPE 8 INT Port SAS/SATA HBA in Slot 3, for internal

CIM_Product

IdentifyingNumber Opaque key

Name String representing the Marketing Name

Vendor HPE

Version Firmware version of HBA

SMX_SASProduct

1-1-24 SMX_SASDriveCage SMX_SASDriveCage represents the drive cage assembly and back plane within a storage enclosure. There can be multiple instances within a duplexed enclosure.

Table Error! No text of specified style in document.-24 Class: SMX_SASDriveCage (CIM_PhysicalPackage)


CIM_ManagedElement

ElementName Port <m> Box <n>, where <m> is the name of the port this drive cage is connected and <n> is the Box Number For example, Port IE Box 1


Name Serial Number of drive cage N/A—when serial number is not available

CIM_PhysicalElement

CreationClassName SMX_SASDriveCage

Manufacturer Drive Cage Vendor string

Model Drive Cage Model string

PartNumber N/A–Not available in this implementation

Tag Opaque key

SerialNumber Enclosure Serial number

Version N/A–Not available in this implementation

CIM_PhysicalPackage


HP_DriveCage

Table Error! No text of specified style in document.-24 Class: SMX_SASDriveCage (CIM_PhysicalPackage)


BackplaneSpeed See profile

DriveBays See profile

DuplexLocation See profile

SMX_SASDriveCage

1-1-25 SMX_SASEnclosureFirmware SMX_SASEnclosureFirmware represents the firmware installed on a MSA Enclosure.

Table Error! No text of specified style in document.-25 Class: SMX_SASEnclosureFirmware (CIM_SoftwareIdentity)

Property name Property Implemenation

CIM_ManagedElement



Name Storage Enclosure Firmware

CIM_LogicalElement

Caption Storage Enclosure Firmware

Description Storage Enclosure Firmware


ClassificationDescriptions[0] Storage Enclosure Firmware



Manufacturer Enclosure Vendor string

IdentityInfoType [0]CIM:SoftwareFamily [1] HPQ:SoftwareCategory

IdentityInfoValue [0]HPQ:<TargetType value> [1] Storage Device

VersionString Enclosure firmware string

SMX_SASEnclosureFirmware

1-1-26 SMX_SASStorageEnclosure SMX_SASStorageEnclosure represents the physical chassis for an internal or externally attached enclosure.

Table Error! No text of specified style in document.-26 Class: SMX_SASStorageEnclosure (HP_StorageEnclosure)


CIM_ManagedElement

ElementName Port: <m> Box: <n>, where <m> is the port and <n> is the box number


Name Port: <m> Box: <n>, where <m> is the port and <n> is the box number

CIM_PhysicalElement

CreationClassName SMX_SASStorageEnclosure

Manufacturer Enclosure vendor string • HP • N/A, if not available

Model Enclosure model string • MSA50 -10D25G1 • N/A, if not available

PartNumber N/A—Not available in this implementation

SerialNumber Enclosure Serial Number N/A is reported if there is no serial number (for example, internal enclosures).

Tag Opaque key

Version N/A—Not available in this implementation

CIM_PhysicalPackage


CIM_PhysicalFrame

CIM_Chassis

HP_StorageEnclosure

Location See HP Storage Enclosure Profile

SMX_SASStorageEnclosure

1-1-27 SMX_SASStorageEnclosureProcessor SMX_SASStorageEnclosureProcessor represents the management processor within a Storage Enclosure. This instance contains the operational status for all managed components in the enclosure if applicable.

Table Error! No text of specified style in document.-27 Class: SMX_SASStorageEnclosureProcessor (CIM_ComputerSystem)

Table Error! No text of specified style in document.-27 Class: SMX_SASStorageEnclosureProcessor (CIM_ComputerSystem)


CIM_ManagedElement

ElementName Port: <m> Box: <n>, where <m> is the port and <n> is the box number


OperationalStatus[0,1, 2, 3 ] Operational status for enclosure and associated power supplies, fans, and sensors. The use of OperationalStatus is described in the HP Storage Enclosure Profile. Index values are populated as follows: • Index[0]—Enclosure status:

○ 0 (Unknown) ○ 2 (OK) ○ 3 (Degraded) ○ 6 (Error)

• Index[1]—Fan status (See Profile) • Index[2]—Power Supply status (See Profile) • Index[3]—Temp Sensor Status (See Profile)

CIM_LogicalElement





CIM_System

CreationClassName SMX_SASStorageEnclosureProcessor

Name Opaque Key

NameFormat Other

CIM_ComputerSystem

Dedicated[0] 2 (Other)

IdentifyingDescriptions[0] Other Vendor Specific Name

OtherDedicatedDescriptions[0] SDE - indicates Storage Device Enclosure

OtherIdentifyingInfo[0] Vendor:SerialNumber enclosure is attached to For example, HP:2SUJ1029

SMX_SASStorageEnclosureProcessor

1-1-28 SMX_SASStorageEnclosureLocation SMX_SASStorageEnclosureLocation represents a location string for the enclosure.

Table Error! No text of specified style in document.-28 Class: HPAS_StorageEnclosureLocation (HP_Location)


ElementName Enclosure location For example, Port 1E Box 1

Caption Enclosure location For example, Port 1E Box 1

Description Enclosure location For example, Port 1E Box 1

Name Key

PhysicalPosition Key

ElementLocationTag • Unknown for Undetermined • External for external enclosures • Internal for drive cages located within the host

chassis

ElementLocationTagDesc 19 (Box)

1-1-29 SMX_SASSmartDriveCarrierAppFirmware Class The SMX_SASSmartDriveCarrierAppFirmware class implements the CIM_SoftwareIdentity class

and represents the firmware installed on a Smart Drive Carrier. This class is implemented only when the

hardware includes Smart Drive Carrier support.



CIM_ManagedElement

ElementName Smart Drive Carrier Application Firmware


Name Smart Drive Carrier Application Firmware

CIM_LogicalElement

Caption Smart Drive Carrier Application Firmware

Description Smart Drive Carrier Application Firmware


ClassificationDescriptions[0] Smart Drive Carrier Application Firmware

Manufacturer Controller Vendor string



IdentityInfoValue [0]HPQ:<TargetType value>

[1]Storage Device


SMX_SASSmartDriveCarrierAppFirmware

1-1-30 SMX_SASSmartDriveCarrierBootldrFirmware Class The SMX_SASSmartDriveCarrierBootldrFirmware class implements the CIM_SoftwareIdentity class and

represents the firmware installed on a Smart Drive Carrier Bootloader. This class is implemented only when

the hardware includes Smart Drive Carrier support. The following table lists the properties implemented.


CIM_ManagedElement

ElementName Smart Drive Carrier Bootloader Firmware


Name Smart Drive Carrier Bootloader Firmware

CIM_LogicalElement

Caption Smart Drive Carrier Bootloader Firmware

Description Smart Drive Carrier Bootloader Firmware


ClassificationDescriptions[0] Smart Drive Carrier Bootloader Firmware


Manufacturer Device Vendor string




[1]Storage Device

VersionString Device firmware version string

SMX_SASSmartDriveCarrierBootldrFirmware

1-1-31 SMX_SASDriveCageDiskPhysicalPackage (Association)

Table Error! No text of specified style in document.-29 Class: SMX_SASDriveCageDiskPhysicalPackage (CIM_Container)


GroupComponent SMX_SASDriveCage

PartComponent SMX_SASDiskPhysicalPackage

1-1-32 SMX_SASStorageEnclosureDriveCage (Association)

Table Error! No text of specified style in document.-30 Class: SMX_SASStorageEnclosureDriveCage (CIM_Container)


GroupComponent SMX_SASStorageEnclosure

PartComponent SMX_SASDriveCage

1-1-33 SMX_SASStorageEnclosureEnclosureLocation (Association)

Table Error! No text of specified style in document.-31 Class: SMX_SASStorageEnclosureEnclosureLocation (CIM_PhysicalElementLocation)


Element SMX_SASStorageEnclosure

PhysicalLocation SMX_SASStorageEnclosureLocation

1-1-34 SMX_SASArraySystemStorageEnclosureProcessor (Association)

Table Error! No text of specified style in document.-32 Class: SMX_SASArraySystemStorageEnclosureProcessor (CIM_SystemComponent)


GroupComponent SMX_SASArraySystem

PartComponent SMX_SASStorageEnclosureProcessor

1-1-35 SMX_SASStorageEnclosureProcessorEnclosureFirmware (Association)

Table Error! No text of specified style in document.-33 Class: SMX_SASStorageEnclosureProcessorEnclosureFirmware (CIM_ElementSoftwareIdentity)


Antecedent SMX_SASEnclosureFirmware

Dependent SMX_SASStorageEnclosureProcessor

ElementSoftwareStatus • ElementSoftwareStatus[0]: 2 (Current) • ElementSoftwareStatus[1]: 6 (Installed)

1-1-36 SMX_SASStorageEnclosureStorageEnclosureProcessor (Association)

Table Error! No text of specified style in document.-34 Class: SMX_SASStorageEnclosureStorageEnclosureProcessor (CIM_systemPackaging)


Antecedent SMX_SASStorageEnclosure

Dependent SMX_SASStorageEnclosureProcessor

1-1-37 SMX_SASStorageVolumeStorageSetting (Association)

Table Error! No text of specified style in document.-35 Class: SMX_SASStorageVolumeStorageSetting (CIM_ElementSettingData)


ManagedElement SMX_SASStorageVolume

SettingData SMX_SASStorageSetting

IsCurrent 1 (Is Current)

IsDefault 1 (Is Default)

1-1-38 SMX_SASPrimordialPoolStorageCapabilities (Association)

Table Error! No text of specified style in document.-36 Class: SMX_SASPrimordialPoolStorageCapabilities (CIM_ElementCapabilities)


Capabilities SMX_SASStorageCapabilities

ManagedElement SMX_SASPrimordialPool

1-1-39 SMX_SASPrimordialPoolNoRaidStorageCapabilities (Association)

Table Error! No text of specified style in document.-37 Class: SMX_SASPrimordialPoolNoRaidStorageCapabilities (CIM_ElementCapabilities)



ManagedElement SMX_SASPrimordialPoolNoRaid

1-1-40 SMX_SASStoragePoolStorageCapabilities (Association)

Table Error! No text of specified style in document.-38 Class: SMX_SASStoragePoolStorageCapabilities (CIM_ElementCapabilities )


Table Error! No text of specified style in document.-38 Class: SMX_SASStoragePoolStorageCapabilities (CIM_ElementCapabilities )



ManagedElement SMX_SASStoragePool

1-1-41 SMX_SASArraySystemSCSIProtocolController (Association)

Table Error! No text of specified style in document.-39 Class: SMX_SASArraySystemSCSIProtocolController (CIM_SystemDevice)



PartComponent SMX_SASSCSIProtocolController

1-1-42 SMX_SASArraySystemPortController (Association)

Table Error! No text of specified style in document.-40 Class: SMX_SASArraySystemPortController (CIM_Logicaldentity)


SameElement SMX_SASArraySystem

SystemElement SMX_SASPortController

1-1-43 SMX_SASArraySystemDiskDrive (Association)

Table Error! No text of specified style in document.-41 Class: SMX_SASArraySystemDiskDrive (CIM_SystemDevice)



PartComponent SMX_SASDiskDrive

1-1-44 SMX_SASArraySystemStorageVolume (Association)

Table Error! No text of specified style in document.-42 Class: SMX_SASArraySystemStorageVolume (CIM_SystemDevice)



PartComponent SMX_SASStorageVolume

1-1-45 SMX_SASArraySystemStorageExtent (Association)

Table Error! No text of specified style in document.-43 Class: SMX_SASArraySystemStorageExtent (CIM_SystemDevice)



PartComponent SMX_SASStorageExtent

1-1-46 SMX_SASArraySystemDAPort (Association)

Table Error! No text of specified style in document.-44 Class: SMX_SASArraySystemDAPort (CIM_SystemDevice)



PartComponent SMX_SASDAPort

1-1-47 SMX_SASArraySystemPrimordialPool (Association)

Table Error! No text of specified style in document.-45 Class: SMX_SASArraySystemPrimordialPool (CIM_HostedStoragePool)



PartComponent SMX_SASPrimordialPool

1-1-48 SMX_SASArraySystemPrimordialPoolNoRaid (Association)

Table Error! No text of specified style in document.-46 Class: SMX_SASArraySystemPrimordialPoolNoRaid (CIM_HostedStoragePool)



PartComponent SMX_SASPrimordialPoolNoRaid

1-1-49 SMX_SASArraySystemStoragePool (Association)

Table Error! No text of specified style in document.-47 Class: SMX_SASArraySystemStoragePool (CIM_HostedStoragePool)



PartComponent SMX_SASStoragePool

1-1-50 SMX_SASComputerSystemArraySystem (Association)

Table Error! No text of specified style in document.-48 Class: SMX_SASComputerSystemArraySystem (CIM_ComponentCS)


GroupComponent HP_ComputerSystem

PartComponent SMX_SASArraySystem

1-1-51 SMX_SASArraySystemArrayController (Association)

Table Error! No text of specified style in document.-49 Class: SMX_SASArraySystemArrayController (CIM_ComponentCS)



PartComponent SMX_SASArrayController

1-1-52 SMX_SASProductPhysicalPackage (Association)

Table Error! No text of specified style in document.-50 Class: SMX_SASProductPhysicalPackage (CIM_ProductPhysicalPackage)


Table Error! No text of specified style in document.-50 Class: SMX_SASProductPhysicalPackage (CIM_ProductPhysicalPackage)


GroupComponent SMX_SASProduct

PartComponent SMX_SASPhysicalPackage

1-1-53 SMX_SASStoragePoolStorageExtent (Association)

Table Error! No text of specified style in document.-51 Class: SMX_SASStoragePoolStorageExtent (CIM_ConcreteComponent)


GroupComponent SMX_SASStoragePool


1-1-54 SMX_SASPrimordialPoolStorageExtent (Association)

Table Error! No text of specified style in document.-52 Class: SMX_SASPrimordialPoolStorageExtent (CIM_ConcreteComponent)


GroupComponent SMX_SASPrimordialPool


1-1-55 SMX_SASPrimordialPoolNoRaidStorageExtent (Association)

Table Error! No text of specified style in document.-53 Class: SMX_SASPrimordialPoolNoRaidStorageExtent (CIM_ConcreteComponent)


GroupComponent SMX_SASPrimordialPoolNoRaid


1-1-56 SMX_SASStorageSpecificCollectionArraySystem (Association)

Table Error! No text of specified style in document.-54 Class: SMX_SASStorageSpecificCollectionArraySystem (CIM_MemberOfCollection)


Collection SMX_SASStorageSpecificCollection

Member SMX_SASArraySystem

1-1-57 SMX_SASStorageRedundancySetStorageExtent (Association)

Table Error! No text of specified style in document.-55 Class: SMX_SASStorageRedundancySetStorageExtent (CIM_MemberOfCollection)


Collection SMX_SASStorageRedundancySet

Member SMX_SASStorageExtent

1-1-58 SMX_SASArraySystemFirmware (Association)

Table Error! No text of specified style in document.-56 Class: SMX_SASArraySystemFirmware (CIM_InstalledSoftwareIdentity)


InstalledSoftware SMX_SASFirmware

System SMX_SASArraySystem

1-1-59 SMX_SASSCSIProtocolControllerStorageVolume (Association)

Table Error! No text of specified style in document.-57 Class: SMX_SASSCSIProtocolControllerStorageVolume (CIM_ProtocolControllerForUnit)


Antecedent SMX_SASSCSIProtocolController

Dependent SMX_SASStorageVolume

DeviceNumber Device LUN number

DeviceAccess 2 (Read Write)

1-1-60 SMX_SASFirmwareArraySystem (Association)

Table Error! No text of specified style in document.-58 Class: SMX_SASFirmwareArraySystem (CIM_ElementSoftwareIdentity)


Antecedent SMX_SASFirmware

Dependent SMX_SASArraySystem


1-1-61 SMX_SASDiskDriveDiskDriveFirmware (Association)

Table Error! No text of specified style in document.-59 Class: SMX_SASDiskDriveDiskDriveFirmware (CIM_ElementSoftwareIdentity)


Antecedent SMX_SASDiskDriveFirmware

Dependent SMX_SASDiskDrive


1-1-62 SMX_SASSmartDrvCarrierAppElementFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.

The following table lists the associations implemented for this class.


Antecedent SMX_SASSmartDriveCarrierAppFirmware


1-1-63 SMX_ SASSmartDrvCarrierAppInstalledFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.




InstalledSoftware SMX_SASSmartDriveCarrierAppFirmware

1-1-64 SMX_ SASSmartDrvCarrierBootldrElementFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.



Antecedent SMX_SASSmartDriveCarrierBootldrFirmware


1-1-65 SMX_ SASSmartDrvCarrierBootldrInstalledFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.




InstalledSoftware SMX_SASSmartDriveCarrierBootldrFirmware

1-1-66 SMX_SASDiskPhysicalPackageDiskDrive (Association)

Table Error! No text of specified style in document.-60 Class: SMX_SASDiskPhysicalPackageDiskDrive (CIM_Realizes)


Antecedent SMX_SASDiskPhysicalPackage


1-1-67 SMX_SASStoragePoolStorageVolume (Association)

Table Error! No text of specified style in document.-61 Class: SMX_SASStoragePoolStorageVolume (CIM_AllocatedFromStoragePool)


Antecedent SMX_SASStoragePool


SpaceConsumed Bytes consumed by volume

1-1-68 SMX_SASPrimordialPoolStoragePool (Association)

Table Error! No text of specified style in document.-62 Class: SMX_SASPrimordialPoolStoragePool (CIM_AllocatedFromStoragePool)


Antecedent SMX_SASPrimordialPool

Dependent SMX_SASStoragePool

SpaceConsumed Bytes consumed by storage pool

1-1-69 SMX_SASSpareExtentStorageRedundancySet (Association)

Table Error! No text of specified style in document.-63 Class: SMX_SASSpareExtentStorageRedundancySet (CIM_IsSpare)


Antecedent SMX_SASStorageExtent

Dependent SMX_SASStorageRedundancySet

1-1-70 SMX_SASStorageExtentStorageVolume (Association)

Table Error! No text of specified style in document.-64 Class: SMX_SASStorageExtentStorageVolume (CIM_BasedOn)


Antecedent SMX_SASStorageExtent


1-1-71 SMX_SASDAPortSCSIProtocolEndpoint (Association)

Table Error! No text of specified style in document.-65 Class: SMX_SASDAPortSCSIProtocolEndpoint (CIM_DeviceSAPImplementation)


Antecedent SMX_SASDAPort

Dependent SMX_SASSCSIProtocolEndpoint

1-1-72 SMX_SASStorageGroupHostedCollection (Association)

Table Error! No text of specified style in document.-66 Class: SMX_SASStorageGroupHostedCollection (HP_GroupHostedCollection)


Antecedent HP_ComputerSystem

Dependent SMX_SASStorageSpecificCollection

1-1-73 SMX_SASPhysicalPackageArraySystem (Association)

Table Error! No text of specified style in document.-67 Class: SMX_SASPhysicalPackageArraySystem (CIM_ComputerSystemPackage)


Antecedent SMX_SASPhysicalPackage


1-1-74 SMX_SASPhysicalPackageArraySystemLocation (Association)

Table Error! No text of specified style in document.-68 Class: SMX_SASPhysicalPackageArraySystemLocation (CIM_PhysicalElementLocation)


Element SMX_SASPhysicalPackage

Physical Location SMX_SASArraySystemLocation

1-1-75 SMX_SASDiskPhysicalPackageDiskDriveLocation (Association)

Table Error! No text of specified style in document.-69 Class: SMX_SASDiskPhysicalPackageDiskDriveLocation (CIM_PhysicalElementLocation)


Element SMX_SASDiskPhysicalPackage

PhysicalLocation SMX_SASDiskDriveLocation

1-1-76 SMX_SASSCSIProtocolEndpointSCSIProtocolController (Association)

Table Error! No text of specified style in document.-70 Class: SMX_SASSCSIProtocolEndpointSCSIProtocolController (CIM_SAPAvailableForElement)


AvailableSAP SMX_SASSCSIProtocolEndpoint

ManagedElement SMX_SASSCSIProtocolController

1-1-77 SMX_SASSoftwareIdentityDriver Class The SMX_SASSoftwareIdentity implements the HP_SoftwareIdentity class to model the SAS software identification information.


CIM_ManagedElement

Caption SAS<Model Name>.

Where Model Name: HBA Name.

Description Description of the SAS Software Identity. For example: SAS Software is installed properly.

ElementName SAS<Model Name>.




StatusDescriptions[0] Description of the status corresponding to the OperationalStatus. For example: OK;

HealthState 5 (OK)

Name Driver Name.

CIM_LogicalElement


InstanceID Opaque instance identifier using HPQ as the OrgID. For example: HPQ: SMX_SASSoftwareIdentity:0



ClassificationDescriptions SAS<Model Name>.


IsEntity False

VersionString Driver Version



IdentityInfoValue

[0]HPQ: < SAS Driver.>

[1] <Model Name>

1-1-78 SMX_SASInstalledSoftwareIdentityDriver Class The SMX_SASInstalledSoftwareIdentity class associates the SMX_ComputerSystem instance with the

installed SMX_SASSoftwareIdentity instance.


System References SMX_SASArraySystem

InstalledSoftware References SMX_SASSoftwareIdentityDriver

1-1-79 SMX_SASElementSoftwareIdentityDriver Class

Table Error! No text of specified style in document.-71 Class: SMX_SASElementSoftwareIdentityDriver (CIM_ElementSoftwareIdentity)


Antecedent SMX_SASSoftwareIdentityDriver



1-1-80 SMX_SASPortControllerPCIDevice (Association) The following table lists the associations implemented for this class.


SystemElement SMX_PCIDevice

SameElement SMX_SASPortController

1-2 Supported indications

1-2-1 SAS HBA status OK

Table Error! No text of specified style in document.-72 HP_DeviceIndication: SAS HBA status OK


CIM_Indication






CIM_AlertIndication

Description A SAS/SATA HBA status has changed from non-OK to OK.

AlertingManagedElement WBEM Path of controller



EventID 1


ProviderName HP SAS




HP_AlertIndication

Summary HBA status OK



ProbableCauseDescription HBA Status Changed to OK



OSType • • On ESXi, 39(VM) •









ImpactedDomain • 3 (Enclosure) for c-Class blade systems • 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure), the properties indicated with (*) are populated.











HWLogicalLocation Controller Location string For example, Slot 3



HP_DeviceIndication


1-2-2 SAS HBA in Error state

Table Error! No text of specified style in document.-73 HP_DeviceIndication: SAS HBA in Error state




CIM_Indication

IndicationIdentifier GUID string generated at the time of indication

PerceivedSeverity Severity • 5 (Major)


CIM_AlertIndication

Description A SAS/SATA HBA status has changed to Error.

AlertingManagedElement WBEM Path of controller



EventID 2


ProviderName HP SAS

RecommendedActions Replace the HBA.



HP_AlertIndication

Summary HBA status Error


ProbableCause 2 (Adapter/Card Error)

ProbableCauseDescription HBA Status Changed to Error












ImpactedDomain • 3 (Enclosure) for c-Class blade systems • 4 (System) for all other systems When ImpactedDomain is 3 (Enclosure) the properties indicated with (*) are populated.











HWLogicalLocation Controller Location string For example, Slot 3



HP_DeviceIndication


1-2-3 Physical Drive Status OK

Table Error! No text of specified style in document.-74 HP_DeviceIndication: Physical Drive status OK




CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed from non-OK to OK.

AlertingManagedElement WBEM Path of disk drive



EventID 201


ProviderName HP SAS




HP_AlertIndication

Summary Physical Drive Status is now OK

EventCategory 6 (Primary Storage)


ProbableCauseDescription Physical Drive Status Changed to OK


OSType • • On ESXi, 39 (VM) •









VariableNames • VariableNames[0]: FailureDescription • VariableNames[1]: DriveInterface

VariableTypes • VariableTypes[0]: 1 (String) • VariableTypes[1]: 4 (uint16)

VariableValues • VariableValues[0]: Short Description of failure • VariableValues[1]: HPSA_DiskDrive.DriveInterface In some cases, the property VariableValues can have N/A or “” values.











HWFirmwareVersion Disk firmware version string

HWLogicalLocation Disk Location string For example, Bay 3

HWManufacturer Disk Manufacturer string

HWSerialNumber Disk Serial Number

HP_DeviceIndication

DeviceModel Disk Model string

1-2-4 Physical Drive status ERROR

Table Error! No text of specified style in document.-75 HP_DeviceIndication: Physical Drive status ERROR


CIM_Indication


PerceivedSeverity Severity For example, 5 (Major)


CIM_AlertIndication

Description A physical drive status has changed to Error.




EventID 202


ProviderName HP SAS

RecommendedActions Check for failed or removed physical drives.



HP_AlertIndication

Summary Physical drive status Error


ProbableCause 86 (Disk Failure)

ProbableCauseDescription Physical Drive Status Changed to Error






Table Error! No text of specified style in document.-75 HP_DeviceIndication: Physical Drive status ERROR






VariableNames FailureDescription

VariableTypes 1 (String)

VariableValues Short Description of failure In some cases, the property VariableValues can have N/A or “” values.















HP_DeviceIndication


1-2-5 Physical Drive status REBUILDING

Table Error! No text of specified style in document.-76 HP_DeviceIndication: Physical Drive status REBUILDING


CIM_Indication


PerceivedSeverity Severity For example, 2 (Information)


CIM_AlertIndication

Description A physical drive status has changed to Rebuilding. Data is now being rebuilt onto this drive from the RAID set.




EventID 203


ProviderName HP SAS




HP_AlertIndication

Summary Physical drive rebuilding



ProbableCauseDescription Physical Drive Rebuilding









HP_DeviceIndication


1-2-6 Physical Drive status PREDICTIVE FAILURE

Table Error! No text of specified style in document.-77 HP_DeviceIndication: Drive status PREDICTIVE FAILURE


CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed to Predictive Failure.




EventID 204


ProviderName HP SAS

RecommendedActions Replace drive immediately to avoid loss of data.



HP_AlertIndication

Summary Physical drive predictive failure





ProbableCauseDescription Physical Drive Predictive Failure




























HWSerialNumber

Disk Serial Number

HP_DeviceIndication


1-2-7 Physical Drive status PREDICTIVE FAILURE due to Solid State Drive Wear out

Table Error! No text of specified style in document.-78 HP_DeviceIndication: Drive status PREDICTIVE FAILURE due to SSD Wear out


CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed to Predictive Failure due to solid state wear out.




EventID 401




ProviderName HP SAS




HP_AlertIndication

Summary Physical drive in predictive failure state due to SSD wear out



ProbableCauseDescription Physical Drive Predictive Failure due to Solid state wear out





























HP_DeviceIndication


1-2-8 Physical Drive status ERROR due to authentication failure

Table Error! No text of specified style in document.-79 HP_DeviceIndication: Drive status changed to Error due to authentication failure


CIM_Indication






CIM_AlertIndication

Description A physical drive status has changed to Error due to authentication failure




EventID 402


ProviderName HP SAS

RecommendedActions Replace the failed or removed physical drives.



HP_AlertIndication

Summary Physical drive status authentication failure

EventCategory 29

ProbableCause 62

ProbableCauseDescription Physical drive status has changed to authentication failure



























HP_DeviceIndication


1-2-9 Logical Drive status OK

Table Error! No text of specified style in document.-80 HP_DeviceIndication: Logical Drive status OK


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed from non-OK to OK.

AlertingManagedElement WBEM Path of Storage Volume



EventID 101


ProviderName HP SAS




HP_AlertIndication

Summary Logical Drive status OK



ProbableCauseDescription Logical Drive Status Changed to OK


NetworkAddresses List of all the IP addresses of the computer system generating the indication





Table Error! No text of specified style in document.-80 HP_DeviceIndication: Logical Drive status OK














1-2-10 Logical Drive status ERROR

Table Error! No text of specified style in document.-81 HP_DeviceIndication: Logical Drive status ERROR


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to Error.






EventID 102


ProviderName HP SAS




HP_AlertIndication

Summary Logical drive status Error



ProbableCauseDescription Logical Drive Status Changed to Error





















1-2-11 Logical Drive status Degraded

Table Error! No text of specified style in document.-82 HP_DeviceIndication: Logical Drive is in a degraded state


CIM_Indication




CIM_AlertIndication

Description A logical drive is in a degraded state. Device is still servicing I/O, but redundancy may be degraded or lost.




EventID 103


ProviderName HP SAS



RecommendedActions Check status of physical drives. Degraded status may be caused by failed or missing physical drives, or a data recovery operation on one or more physical drives.



HP_AlertIndication

Summary Logical drive degraded state



ProbableCauseDescription Logical Drive State Changed to Degraded





















1-2-12 Enclosure Power Supply status changed to Non Redundant

Table Error! No text of specified style in document.-83 HP_DeviceIndication: Enclosure Power Supply status changed to Non Redundant


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Power Subsystem status has changed to non-redundant.

AlertingManagedElement WBEM Path of HP_StorageEnclosureProcessor



EventID 301


ProviderName HP SAS

RecommendedActions Check status of all enclosure power supplies. Ensure that power supplies have not failed. Add or replace power supplies as necessary.





HP_AlertIndication

Summary Power Supply status Non-Redundant

EventCategory 17 (Primary Storage Power)


ProbableCauseDescription Redundant Power Supply Status Changed to Non-Redundant


NetworkAddresses List of all the IP addresses of the computer system generating the indication























HWLogicalLocation Enclosure Location string For example, Port 1I Box 1

HWSerialNumber Enclosure Serial Number

HP_DeviceIndication

DeviceModel Enclosure Model string

1-2-13 Enclosure Power Supply Status changed to OK (Redundant)

Table Error! No text of specified style in document.-84 HP_DeviceIndication: Enclosure Power Supply status changed to OK (Redundant)


CIM_Indication


PerceivedSeverity 2 (Info)


CIM_AlertIndication

Description A Storage Enclosure Power Supply has changed to Fully Redundant.

AlertingManagedElement WBEM Path of SMX_SASStorageEnclosureProcessor





EventID 302


ProviderName HP SAS




HP_AlertIndication

Summary Redundant power supply status OK



ProbableCauseDescription Redundant Power Supply Status Changed to OK



























HP_DeviceIndication


1-2-14 Enclosure Power Supply Status changed to Redundant Degraded

Table Error! No text of specified style in document.-85 HP_DeviceIndication: Enclosure Power Supply status changed to Redundant Degraded


CIM_Indication






CIM_AlertIndication

Description A Storage Enclosure Power Supply status has changed to Degraded Redundancy.




EventID 303


ProviderName HP SAS




HP_AlertIndication

Summary Power supply status Redundant Degraded


ProbableCause 89 (Power supply failure)

ProbableCauseDescription Redundant Power Supply Degraded



























HP_DeviceIndication


1-2-15 Enclosure Temperature sensor Status changed to OK

Table Error! No text of specified style in document.-86 HP_DeviceIndication: Enclosure Temperature sensor status changed to OK


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Temperature sensor Status changed from non-OK to OK.




EventID 307


ProviderName HP SAS




HP_AlertIndication

Summary Temperature sensor status OK

EventCategory 24 (Primary Storage Cooling)


ProbableCauseDescription Temperature Status Changed to OK






Table Error! No text of specified style in document.-86 HP_DeviceIndication: Enclosure Temperature sensor status changed to OK





















HP_DeviceIndication


1-2-16 Enclosure Temperature sensor status changed to Warning

Table Error! No text of specified style in document.-87 HP_DeviceIndication: Enclosure Temperature sensor status changed to Warning


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Temperature sensor Status changed to Warning Condition. This indicates the enclosure temperature is above normal, otherwise enclosure is still operating normally.




EventID 308


ProviderName HP SAS

RecommendedActions Ensure that the system is adequately ventilated. Check for proper room temperature and internal/external airflow. Add or repair fans and air baffling if necessary.



HP_AlertIndication

Summary Temperature sensor status Warning Condition



ProbableCauseDescription Temperature Status Changed to Warning Condition







HP_DeviceIndication


1-2-17 Enclosure Temperature sensor Status Changed to Critical

Table Error! No text of specified style in document.-88 HP_DeviceIndication: Enclosure Temperature sensor status changed to Critical


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Temperature sensor status has changed to Critical. An enclosure temperature is reaching the maximum allowed temperature for normal operation. A shutdown is imminent. Action is required before loss of data occurs.




EventID 309


ProviderName HP SAS






HP_AlertIndication

Summary Temperature sensor status Critical


ProbableCause 51 (Temperature Unacceptable )

ProbableCauseDescription Temperature Status Changed to Critical



























HP_DeviceIndication


1-2-18 Enclosure Fan Status Changed to OK

Table Error! No text of specified style in document.-89 HP_DeviceIndication: Enclosure Fan status changed to OK


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Fan status has changed from a non-OK state to OK.




EventID 304


ProviderName HP SAS






HP_AlertIndication

Summary Fan status OK



ProbableCauseDescription Fan Status Changed to OK



























HP_DeviceIndication


1-2-19 Enclosure Fan status changed to Degraded

Table Error! No text of specified style in document.-90 HP_DeviceIndication: Enclosure Fan status changed to Degraded


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Fan status has changed to Degraded. An enclosure has detected there might be a problem with one or more of the fans.






EventID 305


ProviderName HP SAS




HP_AlertIndication

Summary Fan status Degraded


ProbableCause 94 (Fan failure)

ProbableCauseDescription Fan Degraded



























HP_DeviceIndication


1-2-20 Enclosure Fan Status change to Failure

Table Error! No text of specified style in document.-91 HP_DeviceIndication: Enclosure Fan status changed to Failure


CIM_Indication






CIM_AlertIndication

Description A Storage Enclosure Fan Status changed to Failure. An enclosure has detected a failure in the fan subsystem and there is insufficient fan capability to ensure normal operation.




EventID 306


ProviderName HP SAS




HP_AlertIndication

Summary Fan status Error



ProbableCauseDescription Fan Failure



























HP_DeviceIndication


HPE Insight Manager WBEM Smart Component Installer Provider Overview 1

1 HPE Insight Manager WBEM Smart Component Installer Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Smart Component Installer implements and extends CIM classes described in this document to support installation of HP SmartComponents. This provider supports the InstallFromURI() method with the http URI scheme to retrieve and install HPE Smart Components.


DMTF Software Update Profile (DSP 1025)

DMTF 1.0.0

HP Software Update (P00127)

HP WBEM TC 1.0.1

Requirements






Release History Initial release with HP Insight Management WBEM Providers for ESXi 5.0.

1-1 Setting Up the Provider Installing the There are no special installation instructions for this provider. It is installed by default as


Provider part of the HPE Insight Management WBEM providers.






• SMX_SCInstallationService

• SMX_SCInstallationServiceCapabilities

• SMX_SCInstallerHostedService

• SMX_SCInstallerElementCapabilities

• SMX_SCInstallerConcreteJob

• SMX_SCInstallerJobHostedDependency

• SMX_SCInstallerOwningJobElement

• SMX_iLOBlobdata



1-2-1 SMX_SCInstallationService Class The SMX_SCInstallationService class implements the HP_SoftwareInstallationService class to model the Smart Component installation service. There is only one instance of SMX_SCInstallationService instantiated on a server.




CIM_ManagedElement

Caption “HP Smart Component Installer”

Description “HP Smart Component Installer”

ElementName “HP Smart Component Installer”




StatusDescriptions StatusDescriptions[0] shall contain OK

HealthState 5 (OK)

CIM_LogicalElement





CIM_Service

CreationClassName SMX_SCInstallationService

SystemCreationClassName SMX _ComputerSystem


Name “HP Smart Component Installer”



CIM_SoftwareInstallationService


1-2-1-1 Implemented Methods for SMX_SCInstallationService Class Method Name Method Implementation

InstallFromURI

Must be root to request this method. Unless specified, the matching value in the InstallOptionValues[]for each InstallOptions[] is NULL or an empty string.

Must set either install or discovery option.

Method Parameters:

URI: the http scheme URL to the SmartComponent file to download

InstallOptions[]:

2: Defer Reset –Smart Component not setting reboot

3: Force Install – Smart Component force

4: Install – Smart Component default execution

6: Repair – Smart Component –e or rewrite

7: Reboot – Smart Component reboot

11:Silent – Smart Component silent

32769: Smart Component –u (Use file)

32770: Smart Component –d (Discovery)

32771: Smart Component –g or Downgrade

32772: Smart Component –m or Mutual

32773: Smart Component Estimated Execution Time

Matching InstallOptionValues[]:

InstallOptions[] = 32769: InstallOptionsValues[] = Contents of XML file to use for smart component installation instructions

InstallOptions[] = 32773: InstallOptionsValues[] = Number of seconds Smart Component execution is expected to take

Job: Object path to the SMX_SCInstallerConcreteJob instance that can be


used to track the status of the Job and retrieve detailed status and discovery results.

Return Values:

0 : Successful

1 : Not Supported

4 : Failed

6: Target In Use – an Smart Component execution is already in progress

4096: Request initiated, Job Created

1-2-2 SMX_SCInstallationServiceCapabilities Class The SMX_SCInstallationServiceCapabilities class implements the HP_SoftwareInstallationServiceCapabilities class to model the installation service capabilities. There is only one instance of SMX_SCInstallationServiceCapabilities instantiated on a server.



CIM_ManagedElement

InstanceID Opaque identifier

Caption “HP Smart Component Installer Capabilities”

Description “HP Smart Component Installer Capabilities”

ElementName “HP Smart Component Installer Capabilities”

CIM_Capabilities

CIM_SoftwareInstallationServiceCapabilities

SupportedAsychronousActions 5: URI

SupportedSynchronousActions 2: None

SupportedExtendedResourceTypes 12: HP Smart Component

CanAddToCollection False

SupportedInstallOptions[]

2: Defer Reset –Smart Component not setting reboot

3: Force Install – Smart Component force

4: Install – Smart Component default execution

6: Repair – Smart Component –e or rewrite. This value instructs the firmware to be re-installed if the version of firmware to be deployed is the same as or newer than what is already installed. In the event the firmware on the hardware to be flashed is newer than the version of firmware in the component, the installation of the firmware is bypassed

7: Reboot – Smart Component reboot

11: Silent – Smart Component silent

32768 : unpack. This value will cause the component to extract the contents of the embedded zip file to the directory identified by <dirname>

32769: Smart Component –u (Use file). This option tells the smart component to update the devices as reflected in the XML file passed in as <filename>. This is used by components that do self-discovery to let higher level applications such as HP Smart Update Manager (HP SUM) whether a particular device needs to be updated when in a multi-target environment.

32770: Smart Component –d (Discovery)

32771: Smart Component –g or Downgrade. This value instructs the firmware to be installed if the version of firmware to be deployed is earlier than or newer than what is already installed. Installation is not to occur if the firmware version installed matches the version within the component.

32772: Smart Component –m or Mutual. SHARED STORAGE ENCLOSURES ONLY! This value is used to inform a component it is OK to flash a drive or enclosure in a shared storage environment. An example of a shared storage environment is a clustered environment. Flashing a drive from one server in the cluster while other servers are accessing the drive can



cause data corruption and/or data loss. 32773: Smart Component estimated execution time.

SupportedURISchemes[] 5: http

SMX_SCInstallationServiceCapabilities

1-2-3 SMX_SCInstallerHostedService Class The SMX_SCInstallerHostedService class implements the CIM_HostedService class and associates instances of SMX_ComputerSystem and SMX_SCInstallationService. There is only one instance of SMX_SCInstallerHostedService instantiated on a server.




CIM_HostedService


Dependent References SMX_SCInstallationService

SMX_SCInstallerHostedService

1-2-4 SMX_SCInstallerElementCapabilities Class The SMX_SCInstallerElementCapabilities class implements the CIM_ElementCapabilitiesclass and associates instances of SMX_SCInstallationServiceCapabilities and SMX_SCInstallationService. There is only one instance of SMX_SCInstallerElementCapabilities instantiated on a server.




CIM_HostedService

Capability References SMX_SCInstallationServiceCapabilities

ManagedElement References SMX_SCInstallationService

Characteristics[] 2: Default

3: Current

SMX_SCInstallerElementCapabilities

1-2-5 SMX_SCInstallerConcreteJob Class The SMX_SCInstallerConcreteJob class implements the HP_InstallerConcreteJob class to model an execution of the Smart Component installation service. There is one instance of SMX_SCInstallationService instantiated on a server for each invocation of the SMX_SCInstallationService.InstallFromURI method.



CIM_ManagedElement

Name

“Job for execution of HP Smart Component <name>”

where <name> is the name of the Smart Component being executed

Caption



Description



ElementName “Job for execution of HP Smart Component <name>”

where <name> is the name of the Smart Component being



executed


CIM_LogicalElement



StatusDescriptions StatusDescriptions[0] will contain OK

CIM_Job

PercentComplete 0-100 – proper calculation of percent complete requires client to use the SmartComponent estimated execution time install option.

DeleteOnCompletion True

StartTime The time the job started.

ErrorCode

0-7 - return code from Smart Component 0-7

7- internal error in provider, SmartComponent not executed

500 - download of SmartComponent failed.

ErrorDescription

Text description of the ErrorCode

If SmartComponent executed and returned return code 0, ErrorDescription = “OK”.

If SmartComponent executed and returned return code other than 0, ErrorDescription = “Flasher returned error code: X” where X is the 1-7.

Any other ErrroDescription means download failure or internal provider error and SmartComponent was not executed.



CIM_ConcreteJob

JobState

State of the Job. Valid values are:

3 (Starting)

4 (Running)

7 (Completed) – SmartComponent was successfully downloaded and executed and returned return code of 0

8 (Terminated) – user requested SmartComponent to be terminated via RequestStateChange() method

9 (Killed) – user requested SmartComponent to be killed via RequestStateChange() method

10 (Exception) – any failure in provider to download or execute the SmartComponent, or the SmartComponent returned return code other than 0.

TimeBeforeRemoval “00000000001500.000000:000”

15 minutes

SMX_SCInstallerConcreteJob

1-2-5-1 Implemented Methods for SMX_SCInstallerConcreteJob Class Method Name Method Implementation

GetDetailedStatus

Get the detailed status of the last execution of the Smart Component.

Method parameters:

DetailedStatus[]: array of strings containing the contents of the detailed status output file from the SmartComponent

Return Values:

0 : Successful


1 : Not Supported

4 : Failed

GetDiscoveryData

Get the discovery data from the last execution of the Smart Component.

Method parameters:

DiscoveryData[]: array of strings containing the contents of the discovery output file from the SmartComponent

Return Values:

0 : Successful

1 : Not Supported

4 : Failed

RequestStateChange

Request to abort or kill the active SmartComponent installation. Only valid if the download is in progress, not the actual execution of the SmartComponent.

Method parameters:

RequestedState: The valid states that can be requested are Terminate(4) and Kill(5).

Timeout: Not supported

Return Values:

0 : Successful

2 : Vendor specific error. Job is performing SmartComponent execution and thus cannot be aborted or killed.

4 : Failed

5: Invalid parameters

4096 : Requested State Transition started.

4097 : Invalid State Transition. Job is not in running state.

4098 : Use of Timeout Parameter Not Supported.


1-2-6 SMX_SCInstallerOwningJobElement Class The SMX_SCInstallerOwningJobElement class implements the CIM_OwningJobElement class and associates instances of SMX_SCInstallerConcreteJob and SMX_SCInstallationService.



CIM_OwningJobElement

OwnedElement References SMX_SCInstallerConcreteJob

OwningElement References SMX_SCInstallationService

SMX_SCInstallerOwningJobElement

1-2-7 SMX_SCInstallerJobHostedDependency Class The SMX_SCInstallerJobHostedDependency class implements the CIM_HostedDependency class and associates instances of SMX_SCInstallerConcreteJob and SMX_SCInstallationService.




CIM_HostedService

Antecedent References SMX_SCInstallationService

Dependent References SMX_SCInstallerConcreteJob

SMX_SCInstallerJobHostedDependency

1-2-8 SMX_iLOBlobdata Class The SMX_iLOBlobdata class implements the HP_iLOBlobdata class to model the iLO Blob . Currently this class implements only “ipmanager” Blob in “perm” namespace.




HP_iLOBlobdata

InstanceID Unique key for this instance. “HPQ:SMX_iLOBlobdata:001”.

Namespace “perm”.

Blob “ipmanager”.

ReadStatus Set to “true” when Blob read is success and “false” when the blob read operation fails.

Data Data of Blob “ipmanager”. Available only if the “ReadStatus” is true.

SMX_iLOBlobdata

1-3 Supported Indications No Indications are supported in the SMX_SCInstallerService provider.

HPE Insight Management WBEM SCSI Provider 1

1 HPE Insight Management WBEM SCSI Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Management SCSI HBA data sheet describes the implementation of SCSI HBAs in a host system.This provider implements the following profiles and installs the necessary files:


HP SCSI HBA Profile (P00123) HP WBEM TC 1.0.1

For each, hardware architectures listed, this provider requires the following distributions


Requirements






1-1 Setting up the Provider Installing the Provider





• SMX_SCSI HBAComputerSystem • SMX_SCSIHBAPhysicalPackage

• SMX_SCSIHBAPortController

• SMX_SCSIDAPort

• SMX_SCSIHBAFirmwareIdentity

• SMX_SCSIHBASCSIProtocolEndpoint

• SMX_SCSIDASCSIProtocolEndpoint

• SMX_SCSIHBASCSIProtocolController

• SMX_SCSIHBAGroupCollection

• SMX_SCSIHBALocation

• SMX_SCSIHBAProduct

• SMX_SCSISoftwareIdentityDriver

• SMX_SCSIElementSoftwareIdentityDriver(Association)

• SMX_SCSIInstalledSoftwareIdentityDriver(Association)

• SMX_SCSIHBAComputerSystemSCSIProtocolController (Association)

• SMX_SCSIHBAComputerSystemPortController (Association)

• SMX_SCSIHBAComputerSystemDAPort (Association)

• SMX_SCSIHBAComponentCS (Association)

• SMX_SCSIHBAProductPhysicalComponent (Association)

• SMX_SCSIHBAComputerSystemHBAFirmwareIdentity (Association)

• SMX_SCSIDAPortSCSIProtocolEndpoint (Association)

• SMX_SCSIHBAGroupCollectionComputerSystem (Association)

• SMX_SCSIHBAGroupCollectionHBAComputerSystem (Association)

• SMX_SCSIHBASystemPackaging (Association)

• SMX_SCSIHBAPhysicalPackagePortController (Association)

• SMX_SCSIHBAPhysicalPackageLocation (Association)

• SMX_SCSISCSIProtocolEndpointSCSIProtocolController (Association)

• SMX_SCSIHBAComputerSystemSCSIProtocolEndpoint (Association)




1-2-1 SMX_ SCSIHBAComputerSystem SMX_SCSIHBAComputerSystem represents the SCSI HBA.

There is one instance per HBA.



CIM_ManagedElement

ElementName Controller name and location (for example, SCSI Controller Port 1 in Slot 4)


Name OpaqueKey

OperationalStatus Overall status of the system

• 0 (Other) • 2 (OK) • 3 (Degraded) • 6 (ERROR)

StatusDescriptions More info for OperationalStatus result(s)

CIM_LogicalElement







CIM_System

CreationClassName Key: SMX_SCSIHBAComputerSystem

NameFormat Other

CIM_ComputerSystem

Dedicated 0 (Not Dedicated)

OtherDedicatedDescriptions Direct Attached Storage HBA

SMX_SCSIHBAComputerSystem

ControllerStatus See HP SCSI HBA Profile

1-2-2 SMX_SCSIHBAPhysicalPackage SMX_SCSIHBAPhysicalPackage represents the overall physical package for the SCSI HBA as a whole. There is one instance per HBA.



CIM_ManagedElement





Name HBA serial number

CIM_PhysicalElement

CreationClassName SMX_SCSIHBAPhysicalPackage

Manufacturer HBA vendor string

Model HBA model string

PartNumber N/A—Not available for this implementation

SerialNumber HBA serial number

Tag Opaque ID

Version N/A—Not available in this implementation.

CIM_PhysicalPackage


1-2-3 SMX_SCSIHBAPortController SMX_SCSIHBAPortController represents the HBA in the host system. There is one instance per HBA.





CIM_ManagedElement



Name Controller modelname

OperationalStatus Operational status of the controller

StatusDescriptions Description about the Operational Status

CIM_LogicalElement



EnabledState 5 (Not applicable)


CIM_LogicalDevice

CreationClassName SMX_SCSIHBAPortController

DeviceID Controller serial number: HBA index

SystemCreationClassName SMX_SCSIHBAComputerSystem

SystemName HBA index

CIM_Controller

CIM_PortController




OtherControllerType SCSI

1-2-4 SMX_SCSIDAPort SMX_SCSIDAPort represents the front-end port for an HBA in the host system. Direct Attached implies that the SCSI HBA is attached to a local bus on the host (for example, PCI).



CIM_ManagedElement



OperationalStatus[0] Port status

• 0 (Unknown) • 2 (OK) • 6 (Error)

CIM_LogicalElement



EnabledState 5 (Not applicable)




CIM_LogicalDevice

CreationClassName SMX_SCSIDAPort

DeviceID Opaque key


SystemName HPQ:SMX_SCSIDAPort:HBA Index

CIM_LogicalPort

PortType 82 (PCI)


CIM_DAPort

SMX_SCSIDAPort

1-2-5 SMX_SCSIHBAFirmwareIdentity SMX_SCSIHBAFirmwareIdentity represents the firmware installed on a SCSI HBA controller.



CIM_ManagedElement



Caption SCSI HBA Firmware

Description SCSI HBA Firmware


Set to HPQ:SMX_SCSIHBAFirmwareIdentity


Name SCSI HBA Firmware

CIM_LogicalElement


ClassificationDescriptions[0] SCSI HBA Firmware







[1]Storage Controller


IsEntity FALSE


1-2-6 SMX_SCSIHBASCSIProtocolEndpoint SMX_SCSIHBASCSIProtocolEndpoint represents an access point to storage resources for the HBA.



CIM_ManagedElement



Name HBA serial number

CIM_LogicalElement





CreationClassName SMX_SCSIHBASCSIProtocolEndpoint


SystemName HPQ: SMX_SCSIHBASCSIProtocolEndpoint :HBA index








Role 2 (initiator) or 4(Target) depending on Port Type

1-2-7 SMX_SCSIDASCSIProtocolEndpoint SMX_SCSIDASCSIProtocolEndpoint represents an access point to storage resources for the host.



CIM_ManagedElement



CIM_LogicalElement







CreationClassName SMX_SCSIDASCSIProtocolEndpoint

Name HBA serialnumber


SystemName HPQ: SMX_SCSIDASCSIProtocolEndpoint :HBA index




ConnectionType 3 (Parallel SCSI)

Role 2 (Initiator)

1-2-8 SMX_SCSIHBASCSIProtocolController SMX_SCSIHBASCSIProtocolController represents a view of SCSI resources on the SCSI HBA. This is required to model the presentation of SCSI LUNs to the host system.



CIM_ManagedElement





OperationalStatus[0] Operational status of the controller

• 0 (Unknown) • 2 (OK) • 6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SCSIHBASCSIProtocolController

DeviceID Opaque key


SystemName HPQ: SMX_SCSIHBASCSIProtocolController :HBA index





1-2-9 SMX_SCSIHBAGroupCollection SMX_SCSIHBAGroupCollection represents a collection of SCSI HBA controllers that have been grouped together to report a consolidated status.



CIM_ManagedElement

Caption HP consolidated status for all SCSI HBAs

Description consolidated status for HPE SCSI HBAs

ElementName HPE consolidated status for all SCSI HBAs

CIM_Collection




GroupOperationalStatus Consolidated status for all SCSI HBAs

• 0 (Other) • 2 (OK) • 3 (Degraded) • 6 (ERROR)

GroupStatusDescriptions Description of GroupOperationalStatus

1-2-10 SMX_SCSIHBALocation SMX_SCSIHBALocation represents a location string for the HBA.




CIM_ ManagedElement


Caption Controller name and location

For example, SCSI Controller Port 1 in Slot 4

Description Controller name and location

For example, SCSI Controller Port 1 in Slot 4

CIM_Location

Name Key


HP_Location

ElementLocationTag PCI slot number

ElementLocationTagDesc 23 (Adapter)

LocationInformation[0] PCI Slot number

Examples:

• 3—PCI Slot 3 • 0—Embedded on MotherBoard

LocationInfoDesc[0] 3 (PCI Slot)

1-2-11 SMX_SCSIHBAProduct SMX_SCSIHBAProduct represents the top-level marketing information for the SCSI HBA.


CIM_ ManagedElement


CIM_Product

IdentifyingNumber Key: Opaque key

Name Marketing name

Vendor Vendor string

Version Firmware version

1-2-12 SMX_SCSISoftwareIdentityDriver The SMX_SCSISoftwareIdentityDriver implements the HP_SoftwareIdentity class to model the SCSI software identification information.



CIM_ManagedElement

Caption SCSI HBA <Driver Name>.

Description Description of the SCSI Software Identity.

For example: SCSI Software is installed properly.

ElementName Driver Name.


Name SCSI HBA Software/SCSI Driver Name

HealthState 5 (OK)


StatusDescriptions[0] Description of the status corresponding to the OperationalStatus.

For example: OK;

CIM_LogicalElement


ClassificationDescriptions[0] SCSI HBA <HBA Name>.


2 (Driver)

IdentityInfoValue [0] HPQ:SCSI Driver:

[1] <Driver Name>


IsEntity FALSE

1-2-13 SMX_SCSIElementSoftwareIdentityDriver (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SCSISoftwareIdentityDriver

Dependent SMX_SCSIHBAComputerSystem


1-2-14 SMX_SCSIInstalledSoftwareIdentityDriver (Association) The following table lists the associations implemented for this class.



InstalledSoftware SMX_SCSISoftwareIdentityDriver

System SMX_SCSIHBAComputerSystem

1-2-15 SMX_SCSIHBAComputerSystemSCSIProtocolController (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComputerSystemSCSIProtocolController (CIM_SystemDevice).


GroupComponent SMX_SCSIHBAComputerSystem

PartComponent SMX_SCSIHBASCSIProtocolController

1-2-16 SMX_SCSIHBAComputerSystemPortController (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComputerSystemSCSIProtocolController (CIM_SystemDevice)




SameElement SMX_SCSIHBAComputerSystem

SystemElement SMX_SCSIHBAPortController

1-2-17 SMX_SCSIHBAComputerSystemDAPort (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComputerSystemDAPort (CIM_SystemDevice)


GroupComponent SMX_SCSIHBAComputerSystem

PartComponent SMX_SCSIDAPort.

1-2-18 SMX_SCSIHBAComponentCS (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComponentCS (CIM_ComponentCS)


GroupComponent SMX_ComputerSystem

PartComponent SMX_SCSIHBAComputerSystem


1-2-19 SMX_SCSIHBAProductPhysicalComponent (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAProductPhysicalComponent (CIM_ProductPhysicalPackage)


GroupComponent SMX_SCSIHBAProduct

PartComponent SMX_SCSIHBAPhysicalPackage

1-2-20 SMX_SCSIHBAComputerSystemHBAFirmwareIdentity (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComputerSystemHBAFirmwareIdentity (HP_ElementSoftwareIdentity)


Antecedent SMX_SCSIHBAFirmwareIdentity



UpgradeCondition • 3(SCSIFirmwareOwnerUpgrade)


1-2-21 SMX_SCSIDAPortSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIDAPortSCSIProtocolEndpoint (CIM_DeviceSAPImplementation)


Antecedent SMX_SCSIDAPort

Dependent SMX_SCSIDASCSIProtocolEndpoint

1-2-22 SMX_SCSIHBAGroupCollectionComputerSystem (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAGroupCollectionComputerSystem (HP_GroupHostedCollection)


Antecedent SMX_ComputerSystem

Dependent SMX_SCSIHBAGroupCollection

1-2-23 SMX_SCSIHBAGroupCollectionHBAComputerSystem (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAGroupCollectionHBAComputerSystem (CIM_MemberOfCollection)



Member SMX_SCSI HBAComputerSystem

Collection SMX_SCSIHBAGroupCollection

1-2-24 SMX_SCSIHBASystemPackaging (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBASystemPackaging (CIM_ComputerSystemPackage)


Antecedent SMX_SCSIHBAPhysicalPackage


1-2-25 SMX_SCSIHBAPhysicalPackagePortController (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAPhysicalPackagePortController (CIM_Realizes)


Antecedent SMX_SCSIHBAPhysicalPackage

Dependent SMX_SCSIHBAPortController


1-2-26 SMX_SCSIHBAPhysicalPackageLocation (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAPhysicalPackageLocation (CIM_PhysicalElementLocation)


Element SMX_SCSIHBAPhysicalPackage

PhysicalLocation SMX_SCSIHBALocation

1-2-27 SMX_SCSISCSIProtocolEndpointSCSIProtocolController (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSISCSIProtocolEndpointSCSIProtocolController (CIM_SAPAvailableForElement)


AvailableSAP SMX_SCSIDASCSIProtocolEndpoint

ManagedElement SMX_SCSIHBASCSIProtocolController

1-2-28 SMX_SCSIHBAComputerSystemSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.

Class: SMX_SCSIHBAComputerSystemSCSIProtocolEndpoint (CIM_HostedAccessPoint)



Antecedent SMX_SCSIHBAComputerSystem

Dependent SMX_SCSIDASCSIProtcolEndpoint

HPE Insight Management WBEM System Temperature Sensor Provider 1

1 HPE Insight Management WBEM System Temperature Sensor Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Management System Temperature Sensor provider extends the management capability of referencing profiles by adding the capability to represent HPE Management Processor on HPE servers. This provider implements the following profiles and installs the necessary files:


HP Sensor Profile HP WBEM TC 1.2.0

Requirements















• SMX_NumericSensor

• SMX_SensorCollection

• SMX_SystemSensor

• SMX_HostedSensorCollection

• SMX_MemberOfSensorCollection



1-2-1 SMX_NumericSensor Class The SMX_NumericSensor class implements the HP_NumericSensor and is used to model temperature sensors on servers.



CIM_ManagedElement

Caption

“Temperature Sensor <sensorID>”

Where: <sensorID> is the name displayed by the MP or iLO.

For example: Temperature Sensor Temp 1

Description

“Temperature Sensor <sensorID> detects for NumericSensorType.StatusDescription”

Where: <sensorID>” is the name displayed by the MP or iLO represents the number of the temperature sensor instance, NumericSensorType represents the value of NumericSensorTypeand StatusDescription represents the value of StatusDescriptions[0].

ElementName






2 (OK) – if temperature reported by the sensor is within normal operating range or

– if temperature reported by the sensor has exceeded its non-critical threshold and has set fans to full speed;

6 (Error) – if temperature reported by the sensor has exceeded its threshold and the system is gracefully shutting down.




Temperature reported by the sensor is within normal

operating range – if temperature reported by the sensor is within normal operating range;

Temperature reported by the sensor has exceeded its non-critical threshold and the fans have been set to

full speed – if temperature reported by the sensor has exceeded its threshold and has set fans to full speed;

Temperature reported by the sensor has exceeded its

threshold and the system is gracefully shutting down – if OperationalStatus is 6 (Error)

HealthState 5 (OK) – if OperationalStatus[0] value is 2 (OK);

20 (Major Failure) – if OperationalStatus[0] value is 6 (Error)

Name




CIM_LogicalDevice

CreationClassName SMX_NumericSensor

DeviceID Unique identifier for this temperature sensor instance.

SystemCreationClassName HP_ComputerSystem.CreationClassName

SystemName HP_ComputerSystem.Name







CIM_Sensor

SensorType 2 (Temperature)

CurrentState Normal – if OperationalStatus[0] is 2 (OK);

Critical – if OperationalStatus[0] is 6 (Error);

PossibleStates

Array can contain any of the following values:

PossibleStates[0] = Normal;

PossibleStates[1] = Critical;

CIM_NumericSensor

CurrentReading Current reading of temperature sensor

BaseUnits 2 (Degrees C)

RateUnits 0 (None)

UnitModifier 0

SupportedThresholds

SupportedThresholds[0] = 1 (UpperThresholdNotCritical) if the system will set fans to full speed if the threshold is crossed;

SupportedThresholds[0] = 3 (UpperThresholdCritical) set if the system will gracefully attempt to shutdown the system if the threshold is crossed;

SupportedThresholds[0] = 5 (UpperThresholdFatal) if the system will immediately power down the system if the threshold is crossed.

UpperThresholdNonCritical Contains the threshold temperature that CurrentReading must exceed to be in a non-critical state. This is only set if the system will set fans to full speed if the threshold is crossed.

UpperThresholdCritical Contains the threshold temperature that CurrentReading must exceed to be in a critical state. This is only set if the system will gracefully



attempt to shutdown the system if the threshold is crossed.

UpperThresholdFatal Contains the threshold temperature that CurrentReading must exceed to be fatal. This is only set if the system will immediately power down the system if the threshold is crossed.

HP_NumericSensor

NumericSensorType Enumeration describing the type of temperature sensor. Refer to the Managed Object Format.

1-2-2 SMX_SensorCollection Class The SMX_SensorCollection class implements the HP_SensorCollection and is used to model temperature sensor collections on servers. There is one instance of this class on systems modeling sensors.



CIM_ManagedElement

Caption Temperature Sensor Collection

Description

This is a collection of temperature sensors. GroupStatusDescription.


ElementName Temperature Sensor Collection


InstanceID Unique identifier for this sensor collection instance.





Represents the most severe sensor group operational status:

2 (OK) – if temperatures reported by the sensors are within normal operating rangeor

– if temperatures reported by the sensors have exceeded their non-critical threshold and has set fans to full speed;

6 (Error) – if temperatures reported by the sensors have exceeded their non-critical threshold and the system is gracefully shutting down.


Temperatures reported by the sensors are operating

within normal operating range if temperatures reported by the sensors are within normal operating range;

Temperatures reported by the sensors have exceeded their non-critical threshold and the fans have been

set to full speed if temperatures reported by the sensors have exceeded their threshold and has set fans to full speed;

Temperatures reported by the sensors have exceeded their threshold and the system is gracefully shutting

down if temperatures reported by the sensors have exceeded their threshold and the system is gracefully shutting down.

1-2-3 SMX_MemberOfSensorCollection Class The SMX_MemberOfSensorCollection class implements the HP_MemberOfSensorCollection class and is used to represent an association between the SMX_NumericSensor and SMX_SensorCollection classes.



Collection References SMX_SensorCollection

Member References SMX_NumericSensor


1-2-4 SMX_HostedSensorCollection Class The SMX_HostedSensorCollection class implements the HP_HostedSensorCollection class and is used to represent an association between the SMX_SensorCollection class and the computer system that contains the collection.




Dependent References SMX_SensorCollection

1-2-5 SMX_SystemSensor Class The SMX_SystemSensor class implements the HP_SystemSensor class and is used to represent an association between the SMX_NumericSensor class and the computer system that contains the sensor.




PartComponent References SMX_NumericSensor


The following tables describe the SMX WBEM System Temperature Sensor Provider indications that are implemented for HPE ProLiant server platforms where available.

1-3-1 HP_AlertIndication: Temperature Sensor Threshold Exceeded


CIM_Indication


CIM_AlertIndication

Description

A temperature sensor has detected that the temperature has exceeded the normal operating range. <SensorCaption>

Where: <SensorCaption> is the SMX_NumericSensor.Caption for the sensor that has failed.

AlertingManagedElement WBEM Path of the SMX_NumericSensor instance representing the temperature sensor detecting the exceeded threshold.



EventID 1


ProviderName HP Temperature

RecommendedActions

Ensure that the system is adequately ventilated. Check for proper room temperature and internal/external airflow. Add or repair fans and air baffling if necessary.



HP_AlertIndication

Summary Temperature threshold exceeded detected

ProbableCauseDescription Temperature Threshold Exceeded Detected

ProviderVersion For example: 2.2.0.0


OSType SMX_OperatingSystem.OSType


SystemFirmwareVersion Firmware version of the computer system generating the indication.





SolutionProductModel

Conditional property containing the Solution Name string when running in a aggregate product environment in the format <aggregate product family name> v<major>.<minor>.<update>

VariableNames

Contains the temperature sensor threshold property name that sets a value:

UpperThresholdNonCritical

UpperThresholdCritical

UpperThresholdFatal



VariableTypes 9 (sint32)

VariableValues

SMX_NumericSensor, UpperThresholdNonCritical, UpperThresholdCritical or UpperThresholdFatal property value that is set for the temperature sensor detecting the exceeded threshold.

ImpactedDomain

3 (Enclosure) for c-Class blade systems

4 (System) for all other systems

Note:

When ImpactedDomain is 3 (Enclosure) the properties indicated with (*) below will be populated.




RackName * Rack name, if one exists.

RackUID * Rack Unique Identifie, if one exists.

SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment.

SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment.

1-3-2 HP_AlertIndication: Temperature Sensor Recovery from Threshold Exceeded


CIM_Indication

IndicationIdentifier GUID string generated at the time of indication.



CIM_AlertIndication

Description

A temperature sensor has detected that the temperature has returned to a normal operating range. <SensorCaption>

Where: <SensorCaption> is the SMX_NumericSensor.Caption for the temperature sensor detecting a recovered exceeded threshold.

AlertingManagedElement WBEM Path of SMX__NumericSensor instance representing the temperature sensor detecting a recovered exceeded threshold.



EventID 2


ProviderName HP Temperature




HP_AlertIndication

Summary Threshold exceeded condition recovery



ProbableCause 52 (Threshold Crossed)

ProbableCauseDescription Threshold Exceeded Condition has Recovered





SystemFirmwareVersion Firmware version of the computer system generating the indication.





ImpactedDomain



Note:

When ImpactedDomain is 3 (Enclosure) the properties indicated with (*) below will be populated.






RackName * Rack name, if one exists.

RackUID * Rack Unique Identifier, if one exists.

SystemVirtualSerialNumber Conditional property containing the virtual system serial number string when running in a Virtual Connect environment.

SystemVirtualUUID Conditional property containing the virtual system UUID when running in a Virtual Connect environment.

HPE Insight Management WBEM Smart Array Provider 1

1 HPE Insight Management WBEM Smart Array Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) Management Smart Array provider extends the management capability of referencing profiles by adding the capability to represent HPE Management Processor on HPE servers. This provider only supports internal storage and direct attached external storage, such as MSA 60/70. It does not support externally attached MSA controllers, such as MSA500 and fibre attached devices, for example MSA1000.This provider implements the following profiles and installs the necessary files:


HP Smart Array Profile (P00121) HP WBEM TC 2.14.2 (P00121)



Requirements









• SMX_SAArraySystem

• SMX_SAArrayController

• SMX_SAStorageVolume

• SMX_SADiskDrive

• SMX_SAStorageExtent

• SMX_SADiskDriveFirmware

• SMX_SAPhysicalPackage

• SMX_SAArrayControllerPhysicalPackage

• SMX_SADiskPhysicalPackage

• SMX_SAStorageEnclosure

• SMX_SAStorageEnclosureProcessor

• SMX_SAPortController

• SMX_SADAPort

• SMX_SAFirmware

• SMX_SAEnclosureFirmware

• SMX_SAPrimordialPool

• SMX_SAStoragePool

• SMX_SAMediaAccessStatData

• SMX_SAStorageSetting

• SMX_SADriveCage

• SMX_SASCSIProtocolEndpoint

• SMX_SASCSIProtocolController

• SMX_SAStorageRedundancySet

• SMX_SAStorageSpecificCollection

• SMX_SADriveCageLocation

• SMX_SAArraySystemLocation

• SMX_SADiskDriveLocation

• SMX_SAArrayControllerLocation

• SMX_SAStorageCapabilities

• SMX_SAProduct

• SMX_SAStorageEnclosureLocation

• SMX_SASmartDriveCarrierAppFirmware

• SMX_SASmartDriveCarrierBootldrFirmware

• SMX_SALicense

• SMX_SASoftwareIdentityDriver

• SMX_SAInstalledSoftwareIdentityDriver(Association)

• SMX_SAElementSoftwareIdentityDriver(Association)

• SMX_SAArrayControllerLicense (Association)

• SMX_SASmartDrvCarrierAppElementFirmwareIdentity (Association)


• SMX_SASmartDrvCarrierAppInstalledFirmwareIdentity (Association)

• SMX_SASmartDrvCarrierBootldrElementFirmwareIdentity (Association)

• SMX_SASmartDrvCarrierBootldrInstalledFirmwareIdentity (Association)

• SMX_SAArraySystemRedundancySet (Association)

• SMX_SAStorageVolumeStorageSetting (Association)

• SMX_SAPrimordialPoolStorageCapabilities (Association)

• SMX_SAStoragePoolStorageCapabilities (Association)

• SMX_SAArraySystemStorageEnclosureProcessor (Association)

• SMX_SAArraySystemSCSIProtocolController (Association)

• SMX_SAArraySystemPortController (Association)

• SMX_SAArraySystemDiskDrive (Association)

• SMX_SAArraySystemStorageVolume (Association)

• SMX_SAArraySystemStorageExtent (Association)

• SMX_SAArraySystemDAPort (Association)

• SMX_SMX_SAArraySystemDAPort (CIM_SystemDevice)

• SMX_SAArraySystemPrimordialPool (Association)

• SMX_SAArraySystemStoragePool (Association)

• SMX_SAComputerSystemArraySystem (Association)

• SMX_SAArraySystemArrayController (Association)

• SMX_SAStorageEnclosureStorageEnclosureProcessor (Association)

• SMX_SAProductPhysicalPackage (Association)

• SMX_SAStorageEnclosureDriveCage (Association)

• SMX_SAPhysicalPackageArrayControllerPhysicalPackage (Association)

• SMX_SAPhysicalPackageStorageEnclosure (Association)

• SMX_SADriveCageDiskPhysicalPackage (Association)

• SMX_SAStoragePoolStorageExtent (Association)

• SMX_SAStorageSpecificCollectionArraySystem (Association)

• SMX_SAStorageRedundancySetStorageExtent (Association)

• SMX_SAArraySystemFirmware (Association)

• SMX_SASCSIProtocolControllerStorageVolume (Association)

• SMX_SAFirmwareArraySystem (Association)

• SMX_SAStorageEnclosureProcessorEnclosureFirmware (Association)

• SMX_SADiskDriveDiskDriveFirmware (Association)

• SMX_SADiskDriveStorageExtent (Association)

• SMX_SADiskPhysicalPackageDiskDrive (Association)

• SMX_SAStoragePoolStorageVolume (Association)

• SMX_SAPrimordialPoolStoragePool (Association)

• SMX_SASpareExtentStorageExtent (Association)

• SMX_SASpareExtentStorageRedundancySet (Association)

• SMX_SAStorageExtentStorageVolume (Association)

• SMX_SADAPortSCSIProtocolEndpoint (Association)

• SMX_SAStorageGroupHostedCollection (Association)

• SMX_SAPhysicalPackageArraySystem (Association)

• SMX_SAArrayControllerPhysicalPackageArrayController (Association)

• SMX_SADiskDriveMediaAccessStatData (Association)


• SMX_SAArrayControllerPhysicalPackageArrayControllerLocation (Association)

• SMX_SAPhysicalPackageArraySystemLocation (Association)

• SMX_SADriveCageDriveCageLocation (Association)

• SMX_SADiskPhysicalPackageDiskDriveLocation (Association)

• SMX_SASCSIProtocolEndpointSCSIProtocolController (Association)

• SMX_SAStorageEnclosureEnclosureLocation (Association)

• SMX_SATSASSCSIProtocolEndpoint

• SMX_SAISASSCSIProtocolEndpoint

• SMX_SATSASPort

• SMX_SAISASPort

• SMX_SAISASPortISASSCSIProtocolEndPoint (Association)

• SMX_SAArraySystemISASSCSIProtocolEndPoint (Association)

• SMX_SAArraySystemISASPort (Association)

• SMX_SAPortControllerISASPort (Association)

• SMX_SAArraySystemTSASSCSIProtocolEndpoint (Association)

• SMX_SATSASPortTSASSCSIProtocolEndpoint (Association)

• SMX_SAArraySystemTSASPort (Association)

• SMX_SADiskDriveTSASSCSIProtocolEndpoint (Association)

• SMX_SASCSIInitiatorTargetLogicalUnitPath (Association) • SMX_SAPortControllerPCIDevice (Association) • SMX_SACacheVolumeStorageVolume (Association)



1-2-1 SMX_SAArraySystem Class The SMX_SAArraySystem class implements the HPSA_ArraySystem class and represents the top-level system. There is one instance per HBA.


CIM_ManagedElement

ElementName

Controller/Storage System name and <physical location>.


For example: “Smart Array in Slot=3” for internal

For example: “Smart Array Embedded Controller=7” for embedded controller where 7 is the internal identifier for the embedded controller.



Overall status of the Array System and attached devices.

This is calculated per the algorithm described in the HP Smart Array Profile.

0 (Unknown)

2 (OK)

3 (Degraded)

6 (Error)


More info for OperationalStatus result. This provides a short Description to identify who is contributing to non-OK status.

For example:

Controller Failure

Logical Drive Failure

Storage Enclosure Failure

Controller Non-Failure Problem

Physical Drive Non-Failure Problem

Logical Drive Non-Failure Problem

Storage Enclosure Non-Failure Problem

Array is operating properly

Array status is unknown

CIM_LogicalElement





CIM_System

CreationClassName SMX_SAArraySystem

Name

Controller Serial Number

EMBEDDED-<id> will be reported if there is no Serial Number for device is local

For example: embedded on motherboard.

PCISLOT-<Slot number> will be reported if there is no Serial Number for device is local

For example: PCI occupies slot.

NameFormat Other

CIM_ComputerSystem

Dedicated

Dedicated[0]:

3 (Storage)

Dedicated[1]:

15 (Block Server)



Controller Serial Number

EMBEDDED-<id> will be reported if there is no Serial Number for device is local


PCISLOT-<Slot number> will be reported if there is no Serial Number for device is local.

For example: a PCI occupies slot.

Identify() See HP Smart Array Profile

1-2-2 SMX_SAArrayController Class The SMX_SAArrayController class implements the HPSA_ArrayController class and represents the controller. There is one per HBA and may have multiple controllers.



CIM_ManagedElement

ElementName

Controller name and <physical location>.






Status for Array Controller.

0 (Unknown)

2 (OK)

3(Degraded)

6 (Error)

CIM_LogicalElement





CIM_System

CreationClassName SMX_SAArrayController

Name

Controller Serial Number.

EMBEDDED-<id> will be reported if there is no Serial Number.


PCISLOT-<Slot number> will be reported if there is no Serial Number and the controller is in a PCI slot

Where: <Slot number> is the number of PCI slot.

NameFormat Other

CIM_ComputerSystem

Dedicated Dedicated[0]

0 (Not Dedicated)

HPSA_Arraycontroller

ADGSupported See HP Smart Array Profile

AcceleratorBackupPowerSource See HP Smart Array Profile

BatteryStatus See HP Smart Array Profile

CacheBoardPresent See HP Smart Array Profile

CacheHasBattery See HP Smart Array Profile

CacheParityReadErrors See HP Smart Array Profile

CacheParityWriteErrors See HP Smart Array Profile

CacheReadPercent See HP Smart Array Profile

CacheSerialNumber See HP Smart Array Profile



CacheSizeTotal Populated only if Cache size if less than 32 bits .See HP Smart Array Profile for more details

ExtendedCacheSizeTotal

Total Cache memory size in bytes. See HP Smart Array Profile for more details

CacheState See HP Smart Array Profile

CacheStatus See HP Smart Array Profile

CacheWritePercent See HP Smart Array Profile

ControllerStatus See HP Smart Array Profile

ExpandPriority See HP Smart Array Profile

NumberOfPorts See HP Smart Array Profile

RebuildPriority See HP Smart Array Profile

NumberOfInternalPorts See HP Smart Array Profile

NumberofExternalPorts See HP Smart Array Profile

IsSplitCacheSupported See HP Smart Array Profile

SplitReadSize See HP Smart Array Profile

SplitWriteSize See HP Smart Array Profile

ControllerTemperature See HP Smart Array Profile

CacheModuleTemperature See HP Smart Array Profile

SuperCapTemperature See HP Smart Array Profile



EncryptionStatus

0(Unknown)

1(Other)

2(Not Enabled)

3(Enabled Local Key Mode)

4(EnableRemoteKeyManagerMode)

See HP Smart Array Profile

EncryptSelfTestStatus

0(Unknown)

1(Other)

2(Pass)

3(Failed)


EncryptCSPNvramStatus See HP Smart Array Profile

EncryptCryptoOfficerPwdSetStatus

0(Unknown)

1(Other)

2(True)

3(False)


EncryptCntlrPwdSetStatus

0(Unknown)

1(Other)

2(True)

3(False)


EncryptedCntlrPwdAvailStatus 0(Unknown)



1(Other)

2(Password Missing)

3(Password Active)


EncryptFWLockStatus

0(Unknown)

1(Other)

2(True)

3(False)


EncryptedLogicalDrvCreationPolicy

0(Unknown)

1(Other)

2(True)

3(False)


UnencryptedLogicalDrvCreationPolicy

0(Unknown)

1(Other)

2(True)

3(False)


CacheOperationalStatus

0(Unknown)

1(Other)

2(Ok)

3(Degraded)



4(Error)


IsHBAModeEnabled Specifies whether HBA mode enabled for controller.

IsHBAModeSupported Specifies whether this controller supports HBA mode.

IsSanitizeEraseSupported Specifies whether the controller supports Sanitize Secure Erase.

1-2-3 SMX_SAStorageVolume Class The SMX_SAStorageVolume class implements the HPSA_StorageVolume class and represents the Logical Volumes configured on the Smart Array.



CIM_ManagedElement

ElementName

Logical drive number with raid Description

For example: Logical Volume 1 (RAID 1+0)


Name VPD Pg83 identifier for the volume.



CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SAStorageVolume

DeviceID Opaque Key

SystemCreationClassName SMX_SAArraySystem

SystemName SMX_SAArraySystem.Name

CIM_StorageExtent

ConsumableBlocks 0

BlockSize Block Size in bytes

DataRedundancy 1 (RAID 0,RAID 4, RAID 5, RAID 6), RAID 50, RAID 60

2 (RAID 1+0) , RAID 1, (RAID 5 +1), RAID 1 (ADM), RAID 10 (ADM)

DeltaReservation 0

ExtentStatus[0]

This will indicate extended status for the volume.

2 (None)

11 (Rebuild – Volume is currently rebuilding data)

IsBasedOnUnderlyingRedundancy False



NoSinglePointOfFailure True – RAID 1 or above

False – RAID 0

NumberOfBlocks Total Number of blocks on the volume.

PackageRedundancy

0 (RAID 0)

1 (RAID 1, RAID 1+0, RAID 4, RAID 5, RAID 5+1, RAID 1 (ADM), RAID 10 (ADM))

2 (RAID 6), RAID 50, RAID 60

CIM_Storagevolume

NameFormat 2 (VPD83NAA6)

HPSA_Storagevolume

Accelerator See HP Smart Array Profile

Deleteable See HP Smart Array Profile

FaultTolerance See HP Smart Array Profile

OperationalStatus[0, 1] Volume status. DMTF defined value will be populated in index[0] and extended status will be populated in index[1] per HP Smart Array Profile.

OSName Unknown

StripeSize See HP Smart Array Profile


LogicalVolumeType See HP Smart Array Profile



RelatedLUN See HP Smart Array Profile

CacheVolumeCacheState See HP Smart Array Profile

EncryptionStatus

0(Unknown)

1(Other)

2(Encrypted)

3(Not Encrypted)


SSDSmartPathStatus

Solid State Drive Smart Path Status values.

0(Unknown)

1(Other)

2(SSD SmartPath Enabled)

3(SSD SmartPath Disabled)

4(Update Driver)

RapidParityPercentComplete

The Rapid Parity Percentage complete of a Storage volume.


1-2-4 SMX_SADiskDrive Class The SMX_SADiskDrive class implements the HPSA_DiskDrive class and represents the hard drives connected to Smart Array controllers.




CIM_ManagedElement

ElementName

Disk location

For example: Port: 1E Box 1 Bay: 5


Name Drive Serial Number

OperationalStatus[] Drive status, DMTF defined value is populated in index (0) and extended status is populated in index(1) per HP Smart Array Profile

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SADiskDrive

DeviceID Opaque value



TotalPowerOnHours Number of service hours logged for the SSD disk drive

Note: This value is currently not available from WBEM provider.



CIM_MediaAccessDevice

CIM_DiskDrive

HPSA_DiskDrive

DriveConfiguration See HP Smart Array Profile

DriveHasMNPData See HP Smart Array Profile

DriveInterface See HP Smart Array Profile

DrivePlacement See HP Smart Array Profile

DriveRotationalSpeed See HP Smart Array Profile

NegotiatedDataWidth See HP Smart Array Profile

NegotiatedSpeed See HP Smart Array Profile


SSDTotalPowerOnHours See HP Smart Array Profile

SSDPercentageEnduranceUsed See HP Smart Array Profile

SSDLifeRemaining See HP Smart Array Profile

SSDWearStatus See HP Smart Array Profile

SmartDriveCarrierAuthStatus See HP Smart Array Profile

OtherSmartDriveCarrierAuthStatus See HP Smart Array Profile

EncryptionStatus

0(Unknown)

1(Other)

2(Encrypted)



3(Not Encrypted)


IsSanitizeEraseSupported Specifies whether the disk drive supports Sanitize Secure Erase.

IsCryptoScrambleEraseSupported If Diskdrive supports Sanitize Secure Erase then this specifies whether the disk drive supports Crypto Scramble Erase operation.

IsBlockEraseSupported If Diskdrive supports Sanitize Secure Erase then this specifies whether the disk drive supports Block Erase operation.

IsOverWriteEraseSupported If Diskdrive supports Sanitize Secure Erase then this specifies whether the disk drive supports Over Write Erase operation.

1-2-5 SMX_SAStorageExtent Class The SMX_SAStorageExtent class implements the HPSA_StorageExtent class and represents the consumable storage that is available on a disk drive. There is one instance per disk drive.



CIM_ManagedElement

ElementName

Disk location



Name Serial number of drive




Operational Status for the disk drive

0 (Unknown)

2 (OK)

5 (Predictive Failure)

6 (Error)

OperationalStatus[1] Drive extended status per HP Smart Array Profile

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SAStorageExtent

DeviceID Opaque ID



CIM_StorageExtent

BlockSize Block size in bytes

ConsumableBlocks Total number of blocks on disk drive



ExtentStatus[0]

This will indicate extended status for the disk drive

Possible values:

2 (None)

11 (Rebuild – disk drive is currently rebuilding data)

NumberOfBlocks Total number of blocks on disk drive

Primordial Set to True

TotalPowerOnHours Total service hours reported for SSD disk drives

HPSA_StorageExtent

1-2-6 SMX_SADiskDriveFirmware Class The SMX_SADiskDriveFirmware class implements the HPSA_DiskDriveFirmware class and represents the firmware installed on a disk drive. There is one instance per disk drive.



CIM_ManagedElement

ElementName Disk Drive Firmware


Name Disk Drive Firmware

CIM_LogicalElement

Caption Disk Drive Firmware

Description Disk Drive Firmware

ClassificationDescriptions[0] Disk Drive Firmware



Manufacturer Disk drive vendor string




[1]Storage Device

VersionString Drive firmware as reported from SCSI identify command

HPSA_DiskDriveFirmware

1-2-7 SMX_SAPhysicalPackage Class The SMX_SAPhysicalPackage class implements the HPSA_PhysicalPackage class and represents the overall physical package for the array system as a whole. There is one instance per HBA or Storage Subsystem.



CIM_ManagedElement

ElementName Controller/Storage System name and <physical location>.


Description Host Based RAID Controller ( For Internal Controller)



Name See Serial number implementation

CIM_PhysicalElement

CreationClassName SMX_SAPhysicalPackage

Manufacturer Controller vendor string


PartNumber N/A – Not Available for this implementation

SerialNumber Controller Serial number for HBA’s

Tag Opaque Key

Version N/A – Not Available for this implementation

CIM_PhysicalPackage


HPSA_PhysicalPackage

1-2-8 SMX_SAArrayControllerPhysicalPackage Class The SMX_SAArrayControllerPhysicalPackage class implements the HPSA_ArrayControllerPhysicalPackage class and represents the physical aspects of any Smart Array controller. There is one instance per HBA.



CIM_ManagedElement


ElementName






Name Controller Serial number

CIM_ PhysicalElement

CreationClassName SMX_SAArrayControllerPhysicalPackage

Manufacturer Controller vendor string


PartNumber N/A – Not Available for this implementation

SerialNumber Controller Serial number

Tag Opaque Key

Version N/A – Not Available for this implementation

CIM_PhysicalPackage


HPSA_ ArrayControllerPhysicalPackage

1-2-9 SMX_SADiskPhysicalPackage Class The SMX_SADiskPhysicalPackage class represents the physical aspects of the disk drive. There is one instance per disk drive.




CIM_ManagedElement

ElementName

Disk location



Name

Disk location


CIM_ PhysicalElement

CreationClassName SMX_SADiskPhysicalPackage

Manufacturer Drive vendor string

Model Drive model string

PartNumber N/A – Not Available in this implementation

SerialNumber Drive serial number

Tag Opaque Key

Version N/A – Not Available in this implementation

CIM_PhysicalPackage

HotSwappable TRUE - Drive is hot swappable

FALSE – Drive is not hot swappable






HPSA_ DiskPhysicalPackage

1-2-10 SMX_SAStorageEnclosure Class The SMX_SAStorageEnclosure class implements the HPSA_StorageEnclosureclass and represents the physical chassis for an internal or externally attached enclosure.

CIM_ManagedElement

ElementName Port: <m> Box: <n>

Where: <m> is the port and <n> is the box number.


Name Port: <m> Box: <n>


CIM_PhysicalElement

CreationClassName SMX_SAStorageEnclosure

Manufacturer

Enclosure vendor string

For example: HP

For example: N/A if not available

Model

Enclosure model string

For example: PROLIANT 6L6I

For example: N/A if not available

PartNumber N/A – Not Available in this implementation

SerialNumber

Enclosure Serial Number.

N/A will be reported if there is no serial number (For example: internal enclosures).

Tag Opaque key

Version N/A – Not Available in this implementation

CIM_PhysicalPackage


CIM_PhysicalFrame

CIM_Chassis

HP_StorageEnclosure

Location See HP Storage Enclosure Profile

HPSA_StorageEnclosure

1-2-11 SMX_SAStorageEnclosureProcessor Class The SMX_SAStorageEnclosureProcessor class represents the management processor within a Storage Enclosure. This instance contains the operational status for all managed components in the enclosure if applicable.



CIM_ManagedElement

ElementName Port: <m> Box: <n>



OperationalStatus[0,1, 2, 3 ]

Operational status for enclosure and associated power supplies, fans and sensors.

The use of OperationalStatus is described in the HP Storage Enclosure Profile. Index values are populated as follows.

Index[0] – Enclosure status:

0 (Unknown)

2 (OK)

3 (Degraded)

6 (Error)

Index[1] – Fan status (See Profile)

Index[2] – Power Supply status (See Profile)

Index[3] – Temp Sensor Status (See Profile)

Note:

Operational status for Fan, Power and Temp Sensor will be not detectedfor internal storage enclosure(s) of the local controller(s)

For example: PCI or Embedded.

CIM_LogicalElement





CIM_System

CreationClassName SMX_SAStorageEnclosureProcessor



Name Opaque Key

NameFormat Other

CIM_ComputerSystem

Dedicated[0] 2 (Other)

IdentifyingDescriptions[0] Other Vendor Specific Name

OtherDedicatedDescriptions[0] SDE - indicates Storage Device Enclosure

OtherIdentifyingInfo[0]

Port Number:BoxNumber enclosure is attached to.

For example: 1E:1

HPSA_StorageEnclosureProcessor

1-2-12 SMX_SAPortController Class The SMX_SAPortController class represents the HBA in the host system. There is one instance per HBA.



CIM_ManagedElement

ElementName








CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SAPortController

DeviceID Controller serial number



CIM_Controller

CIM_PortController


OtherControllerType SAS/SATA – SAS/SATA HBA

HPSA_PortController

1-2-13 SMX_SADAPort Class The SMX_SADAPort class implements the HPSA_DAPort class and represents the front-end port for an HBA in the host system. Direct attached implies that the array controller is attached to a local bus on the host, such as PCI.




CIM_ManagedElement

ElementName







Port status

0 (Unknown)

2 (OK)

6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SADAPort

DeviceID Opaque key





CIM_LogicalPort


CIM_DAPort

HPSA_DAPort

1-2-14 SMX_SAFirmware Class The SMX_SAFirmware class implements the HPSA_Firmware class and represents the firmware installed on a Smart Array controller.



CIM_ManagedElement

ElementName TargetTypes value


Name Array Controller Firmware

CIM_LogicalElement

Caption Array Controller Firmware

Description Array Controller Firmware


ClassificationDescriptions[0] Array Controller Firmware


IdentityInfoValue [0]HPQ:<TargetTypes value>

[1]Storage Controller


TargetTypes Controller Model

HPSA_Firmware

1-2-15 SMX_SASmartDriveCarrierAppFirmware Class The SMX_SASmartDriveCarrierAppFirmware class implements the CIM_SoftwareIdentity class and represents the firmware installed on a Smart Array Drive Carrier. This class is implemented only when the hardware includes Smart Drive Carrier support.



CIM_ManagedElement

ElementName Smart Drive Carrier Application Firmware


Name Smart Drive Carrier Application Firmware

CIM_LogicalElement

Caption Smart Drive Carrier Application Firmware



Description Smart Drive Carrier Application Firmware


ClassificationDescriptions[0] Smart Drive Carrier Application Firmware







[1]Storage Device


SMX_SASmartDriveCarrierAppFirmware

1-2-16 SMX_ SASmartDriveCarrierBootldrFirmware Class The SMX_SASmartDriveCarrierBootldrFirmware class implements the CIM_SoftwareIdentity class and represents the firmware installed on a Smart Drive Carrier Bootloader. This class is implemented only when the hardware includes Smart Drive Carrier support.The following table lists the properties implemented.


CIM_ManagedElement

ElementName Smart Drive Carrier Bootloader Firmware




Name Smart Drive Carrier Bootloader Firmware

CIM_LogicalElement

Caption Smart Drive Carrier Bootloader Firmware

Description Smart Drive Carrier Bootloader Firmware


ClassificationDescriptions[0] Smart Drive Carrier Bootloader Firmware



Manufacturer Device Vendor string




[1]Storage Device

VersionString Device firmware version string

SMX_ SASmartDriveCarrierBootldrFirmware

1-2-17 SMX_SALicense Class The SMX_SALicense class implements the CIM_SoftwareIdentity class and represents the license details of a Smart Array Controller. This class is implemented only when the hardware includes license support. The following table lists the properties implemented.




CIM_LogicalElement

Caption License Key value

Description “The license details of Smart Array Controller”



SMX_ SALicense

Name License Key value

VersionString License Key Version

OperationalStatus Status of License key.

ValidDaysSinceInstall

The number of days the license is valid from the time the user installed the license key incase of licenses which expire

Currently set to 0

IdentityInfoType Indicates the level of license the end user has got

IdentityInfoValue Describes the feature the end user gets from the license level

InstallDate license key entered date

LicenseType

Indicates the license type

0 – UnKnown

1 - Flex License

2 – Demo License

3 – Demo Seats License

4 – Free Flex License

5 – Site License

1-2-18 SMX_SASoftwareIdentityDriver The SMX_SASoftwareIdentityDriver implements the HP_SoftwareIdentity class to model the SA software identification information.


CIM_ManagedElement

Caption Smart Array Controller Driver <HBA Name>.

Description

Description of the SA Software Identity.

For example: SA Software is installed properly.

ElementName Smart Array Controller Driver <HBA Name>.




Description of the status corresponding to the OperationalStatus.

For example: OK;

HealthState 5 (OK)

Name Driver Name.

CIM_LogicalElement


InstanceID Opaque instance identifier using HPQ as the OrgID. For example: HPQ: SMX_SASoftwareIdentity:0



ClassificationDescriptions Smart Array Controller Driver <HBA Name>.

IsEntity False




IdentityInfoValue [0]HPQ: < Smart Array Controller Driver.>

[1] <HBA Name>

1-2-19 SMX_SAInstalledSoftwareIdentityDriver Class The SMX_SAInstalledSoftwareIdentityDriver class associates SMX_SAArraySystem instance with the installed SMX_SASoftwareIdentityDriver instance.


System References SMX_SAArraySystem

InstalledSoftware References SMX_SASoftwareIdentityDriver


1-2-20 SMX_SAElementSoftwareIdentityDriver Class The following table lists the associations implemented for this class.


Antecedent SMX_ SASoftwareIdentityDriver

Dependent SMX_SAArraySystem



2 (Current)


6 (Installed)

1-2-21 SMX_SAEnclosureFirmware Class The SMX_SAEnclosureFirmware class implements the HPSA_EnclosureFirmware class and represents the firmware installed on a Smart Array Enclosure.



CIM_ManagedElement

ElementName TargetTypes value


Name Storage Enclosure Processor Firmware

CIM_LogicalElement

Caption Storage Enclosure Processor Firmware

Description Storage Enclosure Processor Firmware


ClassificationDescriptions[0] Storage Enclosure Processor Firmware



Manufacturer Enclosure Vendor string



IdentityInfoValue [0]HPQ:<TargetTypes value>

[1]StorageDevice

VersionString Enclosure firmware string

TargetTypes Enclosure model

HPSA_EnclosureFirmware

1-2-22 SMX_SAPrimordialPool Class The SMX_SAPrimordialPool class implements the HPSA_PrimordialPool class and represents the total raw storage managed by the array controller. There is one instance per array system.



CIM_ManagedElement

ElementName

Controller name and <physical location>: Primordial Pool.


For example: “Smart Array in Slot=3: Primordial Pool” for internal

For example: “Smart Array Embedded Controller=7: Primordial Pool” for embedded controller where 7 is the internal identifier for the embedded controller.


CIM_LogicalElement

CIM_StoragePool


PoolID Controller serial number

Primordial Always set to TRUE

RemainingManagedSpace Remaining raw space on controller. This is calculated by summing the remaining space on all drives attached to the controller.

TotalManagedSpace Total raw space available to controller. This is calculated by summing the total space on all drives connected to this controller.

HPSA_PrimordialPool

1-2-23 SMX_SAStoragePool Class The SMX_SAStoragePool class implements the HPSA_StoragePool class and represents any concrete storage pools created on an array controller. There is one instance per array system.

CIM_ManagedElement

ElementName

Controller name and <physical location>: Array <ID>.


For example: “Smart Array in Slot=3: Array 1” for internal

For example: “Smart Array Embedded Controller=7: Array 1” for embedded controller where 7 is the internal identifier for the embedded controller.


CIM_LogicalElement

CIM_StoragePool


PoolID Controller serial number: <n> where n is the array number as supplied from API.

Primordial Always set to FALSE

RemainingManagedSpace Remaining raw space in current pool

TotalManagedSpace Total raw space managed by this pool

HPSA_StoragePool

1-2-24 SMX_SAMediaAccessStatData Class The SMX_SAMediaAccessStatData class implements the HPSA_MediaAccessStatData and represents the Monitoring and Performance data counters on HPE Disk Drives.



CIM_ManagedElement

CIM_StatisticalData


SampleInterval 00000000000000.000000:000

CIM_MediaAccessStatData

HPSA_MediaAccessStatData

AbortedCommands See HP Smart Array Profile

BadTargetErrors See HP Smart Array Profile

DRQTimeouts See HP Smart Array Profile

ECCRecoveredReadErrors See HP Smart Array Profile

ElementName

Disk location


FailedReadRecovers See HP Smart Array Profile

FailedWriteRecovers See HP Smart Array Profile

FormatErrors See HP Smart Array Profile

HardReadErrors See HP Smart Array Profile

HardwareErrors See HP Smart Array Profile

HardWriteErrors See HP Smart Array Profile

HotPlugCount See HP Smart Array Profile



MediaFailures See HP Smart Array Profile

NotReadyErrors See HP Smart Array Profile

OtherTimeOuts See HP Smart Array Profile

SCSIBusFaults See HP Smart Array Profile

SectorsRead See HP Smart Array Profile

SectorsWritten See HP Smart Array Profile

SeekCount See HP Smart Array Profile

SeekErrors See HP Smart Array Profile

ServiceHours See HP Smart Array Profile

SpinUpErrors See HP Smart Array Profile

RetryRecoveredReadErrors See HP Smart Array Profile

RetryRecoveredWriteErrors See HP Smart Array Profile

1-2-25 SMX_SAStorageSetting Class The SMX_SAStorageSetting class implements the HPSA_StorageSetting class and represents the current raid configuration for a storage volume. There is one instance per storage volume.



CIM_ManagedElement

ElementName

RAID <n>

Where: <n> is the RAID Description.

For example: RAID 0

For example: RAID 1+0

For example: RAID 5

For example: RAID 6

CIM_SettingData


CIM_StorageSetting

ChangeableType 0 (Not Changeable)

DataRedundancyGoal 1 (RAID 0, RAID 4, RAID 5, RAID 6, RAID 50, RAID 60)

2 (RAID 1, RAID 1+0, RAID 5+1)

DataRedundancyMax 1 (RAID 0, RAID 4, RAID 5, RAID 6, RAID 50, RAID 60)


DataRedundancyMin 1 (RAID 0, RAID 4, RAID 5, RAID 6, RAID 50, RAID 60)


DeltaReservationGoal 0



NoSinglePointOfFailure False – RAID 0

True – RAID 1+0, RAID 5, RAID 6, RAID 50, RAID 60



PackageRedundancyGoal

0 (RAID 0)

1 (RAID 1, RAID 1+0, RAID 4, RAID 5, RAID 6,)

2 (RAID 6, RAID 50, RAID 60)

PackageRedundancyMax

0 (RAID 0)

1 (RAID 1+0, RAID 5, RAID 5+1)


PackageRedundancyMin

0 (RAID 0)

1 (RAID 1, RAID 1+0, RAID 4, RAID 5, RAID 5+1)


HPSA_StorageSetting

1-2-26 SMX_SADriveCage Class The SMX_SADriveCage class implements the HPSA_DriveCage class and represents the drive cage assembly and back plane within a storage enclosure. There may be multiple instances within a duplexed enclosure.

Note: For internal drives, no Drive Cage info will be populated

CIM_ManagedElement

ElementName

Port <n>

Where: <n> is the name of the port this drive cage is connected.

For example: Port J3


Name Serial Number of drive cage

N/A – when serial number is not available

CIM_PhysicalElement

CreationClassName SMX_SADriveCage

Manufacturer Drive Cage Vendor string

Model Drive Cage Model string

PartNumber N/A – Not available in this implementation

Tag Opaque key

SerialNumber Enclosure Serial number

Version N/A – Not available in this implementation

CIM_PhysicalPackage


HP_DriveCage

BackplaneSpeed See HP Smart Array profile



DriveBays See HP Smart Array profile

DuplexLocation See HP Smart Array profile

HPSA_DriveCage

1-2-27 SMX_SASCSIProtocolEndpoint Class The SMX_SASCSIProtocolEndpoint class implements the HPSA_SCSIProtocolEndpoint class and represents an access point to storage resources.



CIM_ManagedElement

ElementName






CIM_LogicalElement







CreationClassName SMX_SASCSIProtocolEndpoint

Name HBA Serial Number




ProtocolIFType 1 (Other)

OtherTypeDescription SCSI




Role

0 (Unknown)

2 (Initiator)

3 (Target)

4 (Both Initiator and Target)

HPSA_SCSIProtocolEndpoint

1-2-28 SMX_SASCSIProtocolController Class The SMX_SASCSIProtocolController class implements the HPSA_SCSIProtocolController class and represents a view a SCSI resources on the array controller.





CIM_ManagedElement

ElementName







Operational status of the controller

0 (Unknown)

2 (OK)

6 (Error)

CIM_LogicalElement





CIM_LogicalDevice

CreationClassName SMX_SASCSIProtocolController

DeviceID Opaque key







CIM_ SCSIProtocolController

HPSA_ SCSIProtocolController

1-2-29 SMX_SAStorageRedundancySet Class The SMX_SAStorageRedundancySet class implements the HPSA_StorageRedundancySet class and represents disk sparing aspect of a RAID configuration. There is an instance for every logical drive that has spare drives configured.



CIM_ManagedElement

ElementName Storage Redundancy Set

CIM_Collection



CIM_RedundancySet


MaxNumberSupported 0

MinNumberNeeded 0



RedundancyStatus 2 (Fully Redundant)

4 (Redundancy Lost)

TypeOfSet[0] 5 (Limited Sparing)

CIM_StorageRedundancySet

HPSA_StorageRedundancySet

1-2-30 SMX_SAStorageSpecificCollection Class The SMX_SAStorageSpecificCollection class implements the HPSA_StorageSpecificCollection class and represents a collection of smart array controllers that have been grouped together to report consolidated status.



CIM_ManagedElement

Caption Storage Array Consolidated Status

Description Storage Array Consolidated Status

ElementName Storage Array Consolidated Status

CIM_Collection




GroupOperationalStatus[0] Consolidated status for all array controllers.

Refer to section 9.10 of the HP Smart Array profile for details on



how this is calculated and status example.

GroupStatusDescriptions[0] Description of GroupOperationStatus

HPSA_ StorageSpecificCollection

1-2-31 SMX_SADriveCageLocation Class The SMX_SADriveCageLocation class implements the HPSA_DriveCageLocation class and represents a location string for the drive cage.



CIM_ManagedElement

Caption Drive Cage

Description Drive Cage

ElementName Drive Cage

CIM_Location

Name Opaque key


HP_Location

ElementLocationTag Duplex Top, Duplex Bottom, Non Duplex

ElementLocationTagDesc 22 (Drive Cage)

LocationInformation[0]

HBA Port identifier

For example: J3

For example: 2I

For example: 1E

LocationInfoDesc[0] Port

HPSA_DriveCageLocation

1-2-32 SMX_SAArraySystemLocation Class The SMX_SAArraySystemLocation class implements the HPSA_ArraySystemLocation class and represents a location string for the array system.



CIM_ManagedElement

Caption Smart Array in <physical location>




CIM_Location

Name Opaque key


HP_Location



ElementLocationTag PCI Slot Number – when ‘Adapter’ is specified in ElementLocationTagDesc

ElementLocationTagDesc 23 (Adapter) – for internal HBA’s


Array of text values representing the location components that describe this Ethernet Controller Physical location.



LocationInfoDesc[0] 3 (PCI Slot) – for internal HBA’s

HPSA_ArraySystemLocation

1-2-33 SMX_SADiskDriveLocation Class The SMX_SADiskDriveLocation class implements the HPSA_DiskDriveLocation class and represents a location string for the disk drive.



CIM_ManagedElement

Caption

Controller name, Drive Type and Disk Location

For example: Smart Array E500 Physical Drive – Port: 1E Box 1 Bay: 5

Description


For example: Smart Array E500 Physical Drive - Port: 1E Box 1 Bay: 5

ElementName


For example: Smart Array E500 Physical Drive - Port: 1E Box 1 Bay: 5

CIM_Location

Name Opaque key


HP_Location

ElementLocationTag Bay Number of Disk Drive - When ‘Bay’ is specified in ElementLocationTagDesc.

ElementLocationTagDesc 20 (Bay)– when firmware supports Bay numbering

HPSA_DiskDriveLocation

1-2-34 SMX_SAArrayControllerLocation Class The SMX_SAArrayControllerLocation class implements the HPSA_ArrayControllerLocation class and represents a location string for the array controller.



CIM_ManagedElement

Caption Smart Array in <physical location>



CIM_Location

Name Opaque key


HP_Location

ElementLocationTag

For Internal HBA’s:

PCI Slot Number

For example: 3 – for adapter in PCI Slot 3

For example: 0 – for Embedded adapter

ElementLocationTagDesc 23 (Adapter) – for Internal HBA’s


Array of text values representing the location components that describe this Ethernet Controller Physical location.



LocationInfoDesc[0]

1(MezzanineSlot)—for internal HBA on a Mezzanine Card

3 (PCI Slot) – for internal HBA in a PCI slot

17(Embedded Device) – for internal HBA embedded on Motherboard

HPSA_ArrayControllerLocation

1-2-35 SMX_SAStorageCapabilities Class The SMX_SAStorageCapabilities class implements the HPSA_StorageCapabilities class and represents the possible Capabilities of a storage pool.

CIM_ManagedElement

ElementName

For Primodial Pools:



For Embedded :

Controller name<Embedded >< Opaque key >

For External :

Controller name<External >< Opaque key >


“Smart Array Embedded 1” for embedded

“Smart Array External 4” for external

For Concrete Pools:

Controller name and <physical location>, Array Identifier

For Embedded :

Controller name<Embedded >< Opaque key >

For External :

Controller name<External >< Opaque key >

For example: Smart Array in Slot=3:0 for internal

“Smart Array Embedded 1” for embedded

“Smart Array External 4” for external

CIM_Capabilities

InstanceID Key: Opaque key

CIM_StorageCapabilities

DataRedundancyDefault

1 (When number of drives is an odd number)

2 (When number of drives is an even number – For example: Pool can be configured for mirroring)

DataRedundancyMax

1 (When number of drives is an odd number)

2 (When number of drives is an even number – For example: Pool can be configured for mirroring)

DataRedundancyMin 1

DeltaReservationDefault 0



ElementType 5 (Storage Pool)

NoSinglePointOfFailure

True - When number of drives > 1

(For example: Pool can be configured for redundancy)

False – When number of drives <= 1

NoSinglePointOfFailureDefault

True - When number of drives > 1

(For example: Pool can be configured for redundancy)

False – When number of drives <= 1

PackageRedundancyDefault

0 (When number of drives <= 1)

1 (When number of drives = 2 or 3)

2 (When number of drives > 3)

PackageRedundancyMax

0 (When number of drives <= 1)

1 (When number of drives = 2 or 3)

2 (When number of drives > 3)

PackageRedundancyMin 0

HPSA_StorageCapabilities

1-2-36 SMX_SAProduct Class The SMX_SAProduct class implements the HPSA_Product class and represents the top level marketing information for the array system.



CIM_ManagedElement

ElementName





CIM_Product

IdentifyingNumber Opaque key

Name String representing the Marketing name.

Vendor HPE

Version Firmware version of HBA or Storage System.

HPSA_Product

1-2-37 SMX_SAStorageEnclosureLocation Class The SMX_SAStorageEnclosureLocation class implements the HPSA_StorageEnclosureLocation class and represents a location string for the enclosure.



ElementName

Enclosure location

Port: <m> Box: <n>


Caption

Enclosure location

Port: <m> Box: <n>


Description

Enclosure location

Port: <m> Box: <n>


Name Key



ElementLocationTag

Unknown for Undetermined

External for external enclosures

Internal for drive cages located within the host chassis

ElementLocationTagDesc 19 (Box)

HPSA_StorageEnclosureLocation

1-2-38 SMX_SAStorageVolumeStorageSetting (Association) The following table lists the associations implemented for this class.


ManagedElement SMX_SAStorageVolume

SettingData SMX_SAStorageSetting

IsCurrent 1 (Set to Is Current)

IsDefault 1 (Set to Is Default)

1-2-39 SMX_SAPrimordialPoolStorageCapabilities (Association) The following table lists the associations implemented for this class.


Capabilities SMX_SAStorageCapabilities

ManagedElement SMX_SAPrimordialPool


1-2-40 SMX_SAStoragePoolStorageCapabilities (Association) The following table lists the associations implemented for this class.


Capabilities SMX_SAStorageCapabilities

ManagedElement SMX_SAStoragePool

1-2-41 SMX_SAArraySystemStorageEnclosureProcessor (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SAArraySystem

PartComponent SMX_SAStorageEnclosureProcessor

1-2-42 SMX_SAArraySystemSCSIProtocolController (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SASCSIProtocolController

1-2-43 SMX_SAArraySystemPortController (Association) The following table lists the associations implemented for this class.




SameElement SMX_SAArraySystem

SystemElement SMX_SAPortController

1-2-44 SMX_SAArraySystemDiskDrive (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SADiskDrive

1-2-45 SMX_SAArraySystemStorageVolume (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAStorageVolume

1-2-46 SMX_SAArraySystemStorageExtent (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAStorageExtent


1-2-47 SMX_SAArraySystemDAPort (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SADAPort

1-2-48 SMX_SAArraySystemPrimordialPool (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAPrimordialPool

1-2-49 SMX_SAArraySystemStoragePool (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAStoragePool

1-2-50 SMX_SAComputerSystemArraySystem (Association) The following table lists the associations implemented for this class.


GroupComponent HP_ComputerSystem


PartComponent SMX_SAArraySystem

1-2-51 SMX_SAArraySystemArrayController (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAArrayController

1-2-52 SMX_SAStorageEnclosureStorageEnclosureProcessor (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAStorageEnclosure

Dependent SMX_SAStorageEnclosureProcessor

1-2-53 SMX_SAProductPhysicalPackage (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SAProduct

PartComponent SMX_SAPhysicalPackage

1-2-54 SMX_SAStorageEnclosureDriveCage (Association) The following table lists the associations implemented for this class.



GroupComponent SMX_SAStorageEnclosure

PartComponent SMX_SADriveCage

1-2-55 SMX_SAPhysicalPackageArrayControllerPhysicalPackage (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SAPhysicalPackage

PartComponent SMX_SAArrayControllerPhysicalPackage

1-2-56 SMX_SAPhysicalPackageStorageEnclosure (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SAPhysicalPackage

PartComponent SMX_SAStorageEnclosure

1-2-57 SMX_SADriveCageDiskPhysicalPackage (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SADriveCage

PartComponent SMX_SADiskPhysicalPackage


1-2-58 SMX_SAStoragePoolStorageExtent (Association) The following table lists the associations implemented for this class.


GroupComponent SMX_SAStoragePool

PartComponent SMX_SAStorageExtent

1-2-59 SMX_SAStorageSpecificCollectionArraySystem (Association) The following table lists the associations implemented for this class.


Collection SMX_SAStorageSpecificCollection

Member SMX_SAArraySystem

1-2-60 SMX_SAStorageRedundancySetStorageExtent (Association) The following table lists the associations implemented for this class.


Collection SMX_SAStorageRedundancySet

Member SMX_SAStorageExtent

1-2-61 SMX_SAArraySystemFirmware (Association) The following table lists the associations implemented for this class.



InstalledSoftware SMX_SAFirmware

System SMX_SAArraySystem

1-2-62 SMX_SASCSIProtocolControllerStorageVolume (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SASCSIProtocolController

Dependent SMX_SAStorageVolume

DeviceAccess 2 (Read Write)

DeviceNumber Device LUN number

1-2-63 SMX_SAFirmwareArraySystem (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAFirmware




2 (Current)


6 (Installed)


1-2-64 SMX_SAStorageEnclosureProcessorEnclosureFirmware (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAEnclosureFirmware

Dependent SMX_SAStorageEnclosureProcessor



2 (Current)


6 (Installed)

1-2-65 SMX_SADiskDriveDiskDriveFirmware (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SADiskDriveFirmware

Dependent SMX_SADiskDrive



2 (Current)


6 (Installed)

1-2-66 SMX_SAArrayControllerLicense (Association) This class is implemented only when the hardware includes License support.




Antecedent HPSA_License

Dependent HPSA_ArrayController

1-2-67 SMX_SASmartDrvCarrierAppElementFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.



Antecedent SMX_SASmartDriveCarrierAppFirmware


1-2-68 SMX_ SASmartDrvCarrierAppInstalledFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.




InstalledSoftware SMX_SASmartDriveCarrierAppFirmware

1-2-69 SMX_ SASmartDrvCarrierBootldrElementFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.




Antecedent SMX_SASmartDriveCarrierBootldrFirmware


1-2-70 SMX_ SASmartDrvCarrierBootldrInstalledFirmwareIdentity (Association) This class is implemented only when the hardware includes Smart Drive Carrier support.




InstalledSoftware SMX_SASmartDriveCarrierBootldrFirmware

1-2-71 SMX_SADiskDriveStorageExtent (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SADiskDrive

Dependent SMX_SAStorageExtent

1-2-72 SMX_SADiskPhysicalPackageDiskDrive (Association) The following table lists the associations implemented for this class.



Antecedent SMX_SADiskPhysicalPackage


1-2-73 SMX_SAStoragePoolStorageVolume (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAStoragePool


SpaceConsumed Bytes consumed by volume

1-2-74 SMX_SAPrimordialPoolStoragePool (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAPrimordialPool

Dependent SMX_SAStoragePool

SpaceConsumed Bytes consumed by storage pool

1-2-75 SMX_SASpareExtentStorageExtent (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAStorageExtent


Dependent SMX_SAStorageExtent

1-2-76 SMX_SASpareExtentStorageRedundancySet (Association) The following table lists the associations implemented for this class.



Dependent SMX_SAStorageRedundancySet

1-2-77 SMX_SAStorageExtentStorageVolume (Association) The following table lists the associations implemented for this class.




1-2-78 SMX_SADAPortSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SADAPort

Dependent SMX_SASCSIProtocolEndpoint

1-2-79 SMX_SAStorageGroupHostedCollection (Association) The following table lists the associations implemented for this class.



Antecedent HP_ComputerSystem

Dependent SMX_SAStorageSpecificCollection

1-2-80 SMX_SAPhysicalPackageArraySystem (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAPhysicalPackage


1-2-81 SMX_SAArrayControllerPhysicalPackageArrayController (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAArrayControllerPhysicalPackage

Dependent SMX_SAArrayController

1-2-82 SMX_SADiskDriveMediaAccessStatData (Association) The following table lists the associations implemented for this class.


ManagedElement SMX_SADiskDrive

Stats SMX_SAMediaAccessStatData


1-2-83 SMX_SAArrayControllerPhysicalPackageArrayControllerLocation (Association) The following table lists the associations implemented for this class.


Element SMX_SAArrayControllerPhysicalPackage

PhysicalLocation SMX_SAArrayControllerLocation

1-2-84 SMX_SAPhysicalPackageArraySystemLocation (Association) The following table lists the associations implemented for this class.


Element SMX_SAPhysicalPackage

PhysicalLocation SMX_SAArraySystemLocation

1-2-85 SMX_SADriveCageDriveCageLocation (Association) The following table lists the associations implemented for this class.


Element SMX_SADriveCage

PhysicalLocation SMX_SADriveCageLocation

1-2-86 SMX_SADiskPhysicalPackageDiskDriveLocation (Association) The following table lists the associations implemented for this class.

Element SMX_SADiskPhysicalPackage

PhysicalLocation SMX_SADiskDriveLocation

1-2-87 SMX_SASCSIProtocolEndpointSCSIProtocolController (Association) The following table lists the associations implemented for this class.


AvailableSAP SMX_SASCSIProtocolEndpoint

ManagedElement SMX_SASCSIProtocolController

1-2-88 SMX_SAStorageEnclosureEnclosureLocation (Association) The following table lists the associations implemented for this class.


Element SMX_SAStorageEnclosure

PhysicalLocation SMX_SAStorageEnclosureLocation

1-2-89 SMX_SATSASSCSIProtocolEndpoint SMX_SATSASSCSIProtocolEndpoint implements the HPSA_SATSASSCSIProtocolEndPoint class and represents each port on SAS Drive. The following table lists the associations implemented for this class.


CIM_ManagedElement

ElementName Protocol Endpoint for <xxx>

Where <xxx> is the value populated in the ElementName property of the instance of SMX_SATSASPort associated to this instance via the association SMX_SATSASPortTSASSCSIPE

Caption

Protocol Endpoint for <xxx>

Where <xxx> is the value populated in the ElementName property of the instance of SMX_SATSASPort associated to this instance via the association SMX_SATSASPortTSASSCSIPE


Name

SMX_SADiskDrive.DeviceID:<unique value>

Where <SMX SADiskDrive.DeviceID> is the DeviceID property of the instance of SMX_SADiskDrive associated to this instance via the association SMX_SADiskDriveTSASSCSIPE, and unique value is a unique value across all instances of SMX_SATSASSCSIProtocolEndpoint. For example, a dual port disk has two instances of SMX_SATSASSCSIProtocolEndpoint with the name properties set to:- PH77MW3991:0:0 - PH77MW3991:0:1



SystemName The property value of HPSA_ArraySystem.name

CreationClassName SMX_SATSASSCSIProtocolEndpoint




CIM_ SCSIProtocolEndpoint

ProtocolIFType 1 (Other)




Role 3 (Target)

HPSA_SATSASSCSIProtocolEndpoint

Path Redundancy path status:

0 (Unknown)2 (Active)3 (Passive)5 (Path Error)

1-2-90 SMX_SAISASSCSIProtocolEndpoint SMX_SAISASSCSIProtocolEndpoint implements HPSA_SAISASSCSIProtocolEndpoint and HPSA_SAISASSCSIProtocolEndpoint represents each port on the smart array controller. The following table lists the associations implemented for this class.

CIM_ManagedElement

Caption


Where: <xxx> is the value populated in the ElementName property of the instance of SMX_SATSASPort associated to this instance via the association SMX_SATSASPortTSASSCSIPE

ElementName


Where: <xxx> is the value populated in the ElementName property of the instance of SMX_SATSASPort associated to this instance via the association SMX_SATSASPortTSASSCSIPE


Name The same value as the DeviceID property of the instance of SMX_SAISASPort associated to this instance through the association SMX_SAISASPortISASSCSIPE.


SystemCreationClassName SMX SAArraySystem


CreationClassName SMX_SAISASSCSIProtocolEndpoint

ProtocolIFType 1 (other)


Role 2 (initiator)

1-2-91 SMX_SATSASPort The following table lists the associations implemented for this class.

CIM_ManagedElement

Caption

Port <unique_index>

Where: <unique_index> is a unique index across all ports on a single drive

ElementName

Port <unique_index>

Where: <unique_index> is a unique index across all ports on a single drive


OperationalStatus

2 (OK)

For multi-path supported firmware implementations, the status of the port is OK, and the status of the path is the only element that can be detected.





CIM_LogicalDevice

SystemCreationClassName SMX SAArraySystem


CreationClassName SMX_SATSASPort

DeviceID The same value as the SMX_SATSASSCSIProtocolEndpoint.Name property of the instance associated through SMX_SAISASPortISASSCSIPE.

CIM_LogicalPort

mailto:Caption

mailto:unique_index

mailto:unique_index

mailto:ElementName

mailto:unique_index

mailto:unique_index

mailto:OperationalStatus

mailto:2

mailto:EnabledDefault

mailto:2

mailto:EnabledState

mailto:5

mailto:RequestedState

mailto:12

mailto:SystemnCreationClassName

mailto:SMX%20ArraySystem

mailto:SystemName

mailto:HP_ArraySystem.name

mailto:CreationClassName

mailto:SMX_TSASPort

mailto:DeviceID

mailto:SMX_TSASSCSIProtocolEndpoint.Name

mailto:SMX_ISASPortISASSCSIPE

UsageRestriction 4 (Not restricted)

PortType 94 (SAS)

CIM_SASPort

PermanentAddress Not supported

1-2-92 SMX_SAISASPort The following table lists the associations implemented for this class.


CIM_ManagedElement

Caption

Port <port #>

Where: <port #> is the port number

For example: 1E, 2E, and so on

ElementName

Port <port #>

Where: <port #> is the port number

For example: 1E, 2E, and so on


OperationalStatus

2 (OK)

For multi-path supported firmware implementations, the status of the port is OK, and the status of the path is the only thing that can be detected.


mailto:UsageRestriction

mailto:4

mailto:PortType

mailto:94

mailto:PermanentAddress





CIM_LogicalDevice

SystemCreationClassName SMX ArraySystem


CreationClassName SMX_SAISASPort

DeviceID

SMX SAPortController.DeviceIDport #

Where: SMX_SAPortController.deviceID is the DeviceID property of the instance of SMX_SAPortController associated to this instance via the association SMX_SAPortControllerISASPort, and port # is the port number for the port.

This is the same value that is concatenated to the caption and related properties. An example of a array controller with two external ports is:

PH77MW3991:1E

PH77MW3991:2E

CIM_LogicalPort

UsageRestriction 4 (Not restricted)

PortType 94 (SAS)

CIM_SASPort

PermanentAddress Not supported

1-2-93 SMX_SAISASPortISASSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.



Antecedent SMX_SAISASPort

Dependent SMX_SAISASSCSIProtocolEndpoint

1-2-94 SMX_SAArraySystemISASSCSIProtocolEndPoint (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAArraySystem

Dependent SMX_SAISASSCSIProtocolEndpoint

1-2-95 SMX_SAArraySystemISASPort (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SAISASPort

1-2-96 SMX_SAPortControllerISASPort (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAPortController

Dependent SMX_SAISASPort


1-2-97 SMX_SAArraySystemTSASSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAArraySystem

Dependent SMX_SATSASSCSIProtocolEndpoint

1-2-98 SMX_SATSASPortTSASSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SATSASPort

Dependent SMX_SATSASSCSIProtocolEndpoint

1-2-99 SMX_SAArraySystemTSASPort (Association) The following table lists the associations implemented for this class.



PartComponent SMX_SATSASPort

1-2-100 SMX_SADiskDriveTSASSCSIProtocolEndpoint (Association) The following table lists the associations implemented for this class.



AvailableSAP SMX_SATSASSCSIProtocolEndpoint

ManagedElement SMX_SADiskDrive

1-2-101 SMX_SASCSIInitiatorTargetLogicalUnitPath The following table lists the associations implemented for this class.


Initiator SMX_SAISASSCSIProtocolEndpoint

Target SMX_SATSASSCSIProtocolEndpoint

LogicalUnit SMX_SAStorageExtent

State

0 (Unknown) if path status cannot be ascertained

2 (active) if the path is active and healthy

5 (path error) if the path has an error

3 (passive) path is healthy but is not active or is the standby path

6 (Logical Unit Error) if Logical Unit has an Error

1-2-102 SMX_SAPortControllerPCIDevice (Association) The following table lists the associations implemented for this class.


SystemElement SMX_PCIDevice

SameElement SMX_SAPortController


1-2-103 SMX_ SACacheVolumeStorageVolume (Association) The following table lists the associations implemented for this class.


Antecedent SMX_SAStorageVolume



The following tables describe the SMX WBEM Smart Array Provider indications that are implemented for HPE ProLiant server platforms where available.

1-3-1 HP_DeviceIndication: Physical Drive Status Changed to OK


CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed from a non-OK state to OK.

AlertingManagedElement WBEM Path of SMX_SADiskDrive class





EventID 201


ProviderName HP Smart Array




HP_AlertIndication

Summary Physical Drive status OK
















ImpactedDomain



Note:

When ImpactedDomain is 3 (Enclosure) the properties that follow and are indicated with an asterisk (*) below will be populated.




RackName * Rack name if, one exists

RackUID * Rack Unique Identifier, if one exists




HWFirmwareVersion Physical Disk firmware version string



HWLogicalLocation

Physical Disk Location string

For example: Port:1E Box: 1 Bay 5

HWPhysicalLocation Physical Location of the Failed Drive (Bay Number)

HWSerialNumber Physical Disk Serial Number

HP_DeviceIndication

DeviceModel Physical Disk Model string

DeviceControllerLogicalLocation

Controller Location

For example: SmartArray 642 in Slot 2

VariableNames[]

FailureDescription

DriveInterface

LastFailureDescription

VariableTypes[] String (1)

uint16 (4)

VariableValues[]

FailureDescription – short description of the failure

Drive interface HPSA_DiskDrive.DriveInterface

LastFailureDescription – last failure reason string from the drive. HPSA_DiskDrive.OperationalStatus[1]

1-3-2 HP_DeviceIndication: Physical Drive Status Changed to ERROR


CIM_Indication




PerceivedSeverity Severity

5 (Major)


CIM_AlertIndication

Description A physical drive status has changed to Error.




EventID 202






HP_AlertIndication

Summary Physical drive status Error





ProbableCauseDescription Physical Drive Status Changed to Error










ImpactedDomain



Note:







RackName * Rack name, if one exists







HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)



VariableValues[]




HP_DeviceIndication



Controller Location


1-3-3 HP_DeviceIndication: Physical Drive Status Changed to REBUILDING


CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed to Rebuilding. Data is now being rebuilt onto this drive from the RAID set.






EventID 203






HP_AlertIndication

Summary Physical drive is now rebuilding.



ProbableCauseDescription Physical Drive Status Changed to Rebuilding





SystemFirmwareVersion Firmware version of the computer system generating the



indication






ImpactedDomain



Note:













HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location



1-3-4 HP_DeviceIndication: Physical Drive Status Changed to PREDICTIVE FAILURE


CIM_Indication




CIM_AlertIndication

Description A physical drive status has changed to Predictive Failure.




EventID 204






HP_AlertIndication

Summary Physical drive status Predictive Failure.





ProbableCauseDescription Physical Drive Status Changed to Predictive Failure.










ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface





uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location


1-3-5 HP_DeviceIndication: Physical Drive Status Changed to Degraded


CIM_Indication


PerceivedSeverity 2(Informational)


CIM_AlertIndication

Description A physical drive has changed to degraded state. Device is still servicing I/O but redundancy may be degraded or lost.






EventID 205



RecommendedActions Check status of physical drive paths. Degraded status may be caused by failed or missing paths to a drive.



HP_AlertIndication

Summary Physical drive in degraded state



ProbableCauseDescription Physical Drive Status Changed to Degraded












ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication


DeviceControllerLogicalLocation Controller Location

For example:



SmartArray 642 in Slot 2

1-3-6 HP_DeviceIndication: Physical Drive Status Changed to Predictive Failure due to Solid State Drive Wearout


CIM_Indication




CIM_AlertIndication

Description The Physical drive status has changed to Predictive Failure due to Solid State drive wear out.




EventID 206








HP_AlertIndication

Summary Physical drive status in Predictive Failure due to SSD wears out.



ProbableCauseDescription The Physical drive status has changed to Predictive Failure due to Solid State drive wear out.












ImpactedDomain



Note:












HWLogicalLocation







VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location


1-3-7 HP_DeviceIndication: Physical Drive Status Changed to Warning due to NonAuthenticated


CIM_Indication






CIM_AlertIndication

Description

The physical drive was not able to be authenticated and could not be validated to be a genuine HP hard drive. The array controller will no longer control the drive LEDs.




EventID 207



RecommendedActions Please replace the hard drive with a genuine HP hard drive



HP_AlertIndication

Summary Physical drive status Degraded.



ProbableCauseDescription Indicates that the physical drive was not able to be authenticated and could not be validated



to be a genuine HP hard drive.










ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)



VariableValues[]




HP_DeviceIndication



Controller Location


1-3-8 HP_DeviceIndication: Physical Drive SSD Status Changed from non-OK state to OK


CIM_Indication




CIM_AlertIndication

Description A physical drive SSD status has changed from non-OK state to OK






EventID 208



RecommendedActions No action is recommended



HP_AlertIndication

Summary Physical drive SSD status OK











indication





ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location



1-3-9 HP_DeviceIndication: Physical Drive Status Changed to Predictive Failure due to Solid State drive wear out 2 Percent Threshold


CIM_Indication




CIM_AlertIndication

Description The Physical drive status has changed to Predictive Failure due to Solid State drive wear out 2 Percent Threshold




EventID 209






HP_AlertIndication



Summary Physical drive in Predictive Failure state



ProbableCauseDescription Physical drive status has changed to Predictive Failure










ImpactedDomain



Note:

When ImpactedDomain is 3 (Enclosure) the properties that follow and are indicated with an asterisk (*) below will be



populated.











HWLogicalLocation







VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location


1-3-10 HP_DeviceIndication: Physical Drive Status Changed to Predictive Failure due to Solid State drive wear out 5 Percent Threshold


CIM_Indication






CIM_AlertIndication

Description The Physical drive status has changed to Predictive Failure due to Solid State drive wear out 5 Percent Threshold




EventID 210






HP_AlertIndication
















ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication





Controller Location


1-3-11 HP_DeviceIndication: Physical Drive Status Changed to Predictive Failure due to Solid State drive wear out 56 Day Threshold


CIM_Indication




CIM_AlertIndication

Description The Physical drive status has changed to Predictive Failure due to Solid State drive wear out 56 Day Threshold




EventID 211








HP_AlertIndication
















ImpactedDomain



Note:












HWLogicalLocation Physical Disk Location string

For example:



Port:1E Box: 1 Bay 5



VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location


1-3-12 HP_DeviceIndication: Physical Drive Status Changed to Secure Erase State


CIM_Indication






CIM_AlertIndication

Description

A Physical Drive is Currently Offline but operational, Secure Erase is in Progress. Once the Secure Erase is Complete, please reinsert the same disk or new disk for the disk to be operational.




EventID 212






HP_AlertIndication

Summary Physical drive status Secure Erase.





ProbableCauseDescription Physical Drive is in Secure Erase State.










ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)



VariableValues[]




HP_DeviceIndication



Controller Location


1-3-13 HP_DeviceIndication: Physical Drive Status Changed to Secure Erase Completed


CIM_Indication




CIM_AlertIndication

Description A physical drive is in Online state. After Secure Erase Operation.






EventID 213






HP_AlertIndication

Summary Physical Drive status Online.



ProbableCauseDescription Physical Drive is Online and operational, Secure Erase operation is completed.








indication





ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

DriveInterface



uint16 (4)

VariableValues[]




HP_DeviceIndication



Controller Location



1-3-14 HPSA_StorageVolumeIndication : Logical Drive Status Changed to OK


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed from a non-OK state to OK.

AlertingManagedElement WBEM Path of SMX_SAStorageVolume Class



EventID 101






HP_AlertIndication

Summary Logical drive status OK





ProbableCauseDescription Logical Drive Status Changed to OK










ImpactedDomain















HWLogicalLocation

Logical drive number and RAID Level

For example: LogicalDrive1 (RAID 1+0).

VariableNames[] FailureDescription


VariableValues[] FailureDescription short description of the failure

HP_DeviceIndication

HPSA_StorageVolumeIndication



DeviceOperationalStatus

Current OperationalStatus values for Storage Volume

DeviceOperationalStatus[0]:

SMX_SAStorageVolume.OperationalStatus[0]



(This index is only populated if there is additional Vendor unique status available)

DeviceOperationalStatusPrevious

Previous OperationalStatus values for Storage Volume

DeviceOperationalStatusPrevious[0]:





1-3-15 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to ERROR


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to Error.



AlertingManagedElement WBEM Path of SMX_SAStorageVolume class



EventID 102






HP_AlertIndication

Summary Logical drive status error



ProbableCauseDescription Logical Drive Status Changed to Error












ImpactedDomain



Note:













HWLogicalLocation

Logical drive number & RAID Level.





HP_DeviceIndication

SMX_SAStorageVolumeIndication


Current OperationStatus values for Storage Volume







Previous OperationStatus values for Storage Volume





(This index is only populated if there is additional Vendor unique



status available)

1-3-16 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Degraded


CIM_Indication


PerceivedSeverity 3 Warning


CIM_AlertIndication

Description A logical drive is in a degraded state. Device is still servicing I/O but redundancy may be degraded or lost.




EventID 103





RecommendedActions

Check status of physical drives. Degraded status may be caused by failed or missing physical drives, or a data recovery operation on one or more physical drives.



HP_AlertIndication

Summary Logical drive in degraded state



ProbableCauseDescription Logical State Changed to Degraded












ImpactedDomain



Note:













HWLogicalLocation


For example: LogicalDrive 1 (RAID 1+0).




HP_DeviceIndication

















1-3-17 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Degraded-multipath failure


CIM_Indication




CIM_AlertIndication

Description A logical drive is in a degraded state. Multipath support is Lost. Either cable is removed or not configured.




EventID 104



RecommendedActions Check status of Logical drives. Degraded status may be caused by multipath failure.



HP_AlertIndication



Summary Logical drive in degraded state - multipath failure.



ProbableCauseDescription Logical State Changed to Degraded










ImpactedDomain



Note:













HWLogicalLocation






HP_DeviceIndication


















1-3-18 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Expanding


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to Expanding.






EventID 105



RecommendedActions Check status of Logical drives. Degraded status may be caused by Expanding operation.



HP_AlertIndication

Summary Logical drive in expanding state.



ProbableCauseDescription Logical State Changed to expanding



OSVersion The operating system version of the computer system generating the indication in the following format:

<major>.<minor>.<build>







ImpactedDomain



Note:








SystemVirtualUUID Conditional property containing the virtual system UUID when



running in a Virtual Connect environment



HWLogicalLocation






HP_DeviceIndication


















1-3-19 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Queued for Expansion


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to Queued for Expansion.




EventID 106





RecommendedActions Check status of Logical drives. Degraded status may be caused by Queued for Expansion operation.



HP_AlertIndication

Summary Logical drive in queued for expansion state.



ProbableCauseDescription Logical State Changed to queued for expansion












ImpactedDomain



Note:











HWLogicalLocation








HP_DeviceIndication
















1-3-20 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Not Yet Available


CIM_Indication






CIM_AlertIndication

Description A logical drive status has changed to Not Yet Available.




EventID 107



RecommendedActions Check status of Logical drives. Degraded status may be caused by not yet available state.



HP_AlertIndication

Summary Logical drive in not yet available state.





ProbableCauseDescription Logical State Changed to not yet available










ImpactedDomain



Note:













HWLogicalLocation






HP_DeviceIndication








(This index is only populated if there is additional Vendor unique



status available)








1-3-21 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to No Access- Encrypted with No Controller Key state


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to No Access – Encrypted with No Controller Key State.






EventID 108



RecommendedActions Check status of Logical drives. Failed status may be caused by Encrypted volume which can not be accessed because the controller has not received key yet.



HP_AlertIndication

Summary Logical drive in No Access- Encrypted with No Controller Key.



ProbableCauseDescription Logical State Changed to No Access- Encrypted with No Controller Key state



OSVersion The operating system version of the computer system generating

the indication in the following format: <major>.<minor>.<build>







ImpactedDomain



Note:






HWLogicalLocation






HP_DeviceIndication


















1-3-22 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to No Access - Encrypted with Controller Encryption Not Enabled


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to No Access - Encrypted with Controller Encryption Not Enabled.




EventID 110





RecommendedActions Check status of Logical drives. Failed status may be caused by Encrypted volume which can not be accessed because controller encryption is not enabled.



HP_AlertIndication

Summary Logical drive in No Access - Encrypted with Controller Encryption Not Enabled state.



ProbableCauseDescription Logical State Changed to No Access - Encrypted with Controller Encryption Not Enabled








indication





ImpactedDomain



Note:













HWLogicalLocation






HP_DeviceIndication

















1-3-23 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Rapid Parity Initialization in progress


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to Rapid Parity Initialization in progress.




EventID 111



RecommendedActions Check status of Logical drives. Degraded status may be caused by Rapid Parity Initialazation is in progress.



HP_AlertIndication



Summary Logical drive in Rapid Parity Initialization in progress state.



ProbableCauseDescription Logical State Changed to Rapid Parity Initialization in progress










ImpactedDomain



Note:

When ImpactedDomain is 3 (Enclosure) the properties that follow and are indicated with an asterisk (*) below will be



populated.










HWLogicalLocation








HP_DeviceIndication
















1-3-24 SMX_SAStorageVolumeIndication: Logical Drive Status Changed to Rapid Parity Initialization Queued


CIM_Indication






CIM_AlertIndication

Description A logical drive status has changed to Rapid Parity Initialization Queued.




EventID 112



RecommendedActions Check status of Logical drives. Degraded status may be caused by Rapid Parity Initialization Queued state.



HP_AlertIndication

Summary Logical drive in Rapid Parity Initialization Queued state.



ProbableCauseDescription Logical State Changed to Rapid Parity Initialization Queued

NetworkAddresses Contains a list of all the IP addresses of the computer system



generating the indication









ImpactedDomain



Note:













HWLogicalLocation






HP_DeviceIndication


















1-3-25 SMX_SAStorageVolumeIndication: New Logical Drive Key Rekey In Progress


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to New Logical Drive Key Rekey In Progress.




EventID 113

EventTime Time of the event or time of the indication if event time



unknown


RecommendedActions Check status of Logical drives.Degraded status may be caused by New Logical Drive Key Rekey In Progress state.



HP_AlertIndication

Summary Logical drive in New Logical Drive Key Rekey In Progress.



ProbableCauseDescription Logical State Changed to New Logical Drive Key Rekey In Progress












ImpactedDomain



Note:













HWLogicalLocation






HP_DeviceIndication

















1-3-26 SMX_SAStorageVolumeIndication: Logical Drive Status Transforming from Unencrypted to Encrypted


CIM_Indication




CIM_AlertIndication

Description A logical drive status has changed to transforming from Unencrypted to Encrypted




EventID 109



RecommendedActions Check status of Logical drives.Degraded status may be caused by transforming from Unencrypted to Encrypted state.



HP_AlertIndication



Summary Logical drive in transforming from Unencrypted to Encrypted state.



ProbableCauseDescription Logical State Changed to transforming from Unencrypted to Encrypted










ImpactedDomain



Note:

When ImpactedDomain is 3 (Enclosure) the properties that



follow and are indicated with an asterisk (*) below will be populated.










HWLogicalLocation








HP_DeviceIndication
















1-3-27 HP_DeviceIndication: Controller Status Changed to OK Property Name Property Implementation

CIM_Indication




CIM_AlertIndication



Description A Smart Array controller status has changed from non-OK to OK.

AlertingManagedElement WBEM Path to SMX_SAArrayController class.



EventID 1






HP_AlertIndication

Summary Controller status OK



ProbableCauseDescription Array Controller Status Changed to OK












ImpactedDomain



Note:














HWFirmwareVersion Array Controller firmware version string

HWLogicalLocation

Array Controller Location string

For example: Smart Array P600 in Slot 5

HWManufacturer Array Controller Manufacturer

HWSerialNumber Array Controller Serial Number

VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]


CacheSizeTotal HPSA_ArrayController.CacheSizeTotal

CacheSerialNumber HPSA_ArrayController.CacheSerialNumber

HP_DeviceIndication

DeviceModel Array Controller Model string


1-3-28 HP_DeviceIndication: Controller Status Changed to ERROR


CIM_Indication




CIM_AlertIndication

Description A Smart Array controller status has changed to Error.




EventID 2



RecommendedActions Check controller status and run diagnostics.



HP_AlertIndication

Summary Controller status Error




ProbableCause 24 (I/O device error)

ProbableCauseDescription Array Controller Status Changed to Error










ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[] FailureDescription – short description of the failure

CacheSizeTotal



HPSA_ArrayController.CacheSizeTotal


HP_DeviceIndication


1-3-29 HP_DeviceIndication: Controller Battery Status Change - OK


CIM_Indication


PerceivedSeverity 2 (info)


CIM_AlertIndication

Description A Smart Array controller Battery status has changed from non-OK to OK.




EventID 6







SystemCreationClass CreationClassName of the computer system generating the indication

HP_AlertIndication

Summary Controller battery status OK



ProbableCauseDescription Controller Battery Status Changed to OK














ImpactedDomain



Note:











HWLogicalLocation







VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-30 HP_DeviceIndication: Controller Battery Status Changed to not fully charged


CIM_Indication




CIM_AlertIndication

Description A Smart Array controller Battery status has changed to Not Fully Charged.






EventID 7



RecommendedActions Check battery operation, allow time to the battery to be fully charged.



HP_AlertIndication

Summary Controller Battery Status set to Not fully Charged.


ProbableCause 99 (low battery)

ProbableCauseDescription Controller Battery Status Changed to Not Fully Charged












ImpactedDomain



Note:














HWLogicalLocation Array Controller Location string




VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-31 HP_DeviceIndication: Controller Battery Status Changed to FAILED


CIM_Indication






CIM_AlertIndication

Description A Smart Array controller battery status changed to Failed.




EventID 8



RecommendedActions Check battery connection and replace if necessary.



HP_AlertIndication

Summary Controller battery status Failed


ProbableCause 92 (battery failure)

ProbableCauseDescription Controller Battery Status Changed to Failed












ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]






HP_DeviceIndication


1-3-32 HP_DeviceIndication: Controller Cache Status - OK Property Name Property Implementation

CIM_Indication




CIM_AlertIndication

Description A Smart Array controller Cache status has changed from non-OK to OK.




EventID 9








HP_AlertIndication

Summary Controller cache status OK



ProbableCauseDescription Controller Cache Status Changed to OK




















ImpactedDomain



Note:









VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber




uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-33 HP_DeviceIndication: Controller Cache Status - Temporarily Disabled


CIM_Indication




CIM_AlertIndication

Description

A Smart Array controller Cache status has changed to Temporarily Disabled. This may be caused by a rebuild or configuration change. Normal operation will return after background operations have completed.






EventID 10






HP_AlertIndication

Summary Array controller cache status temporarily disabled


ProbableCause 35 (Performance Degraded)

ProbableCauseDescription Array Controller Cache Status Changed to Temporarily Disabled












ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-34 HP_DeviceIndication: Controller Cache Status - Permanently Disabled


CIM_Indication






CIM_AlertIndication

Description

A Smart Array controller Cache status has changed to Permanently Disabled. The controller has detected a problem with the cache and has disabled the cache permanently.




EventID 11



RecommendedActions Check the cache controller error code and run diagnostics.



HP_AlertIndication

Summary Array controller cache status permanently disabled



ProbableCauseDescription Array Controller Cache Status Changed to Permanently



Disabled










ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]



CacheSerialNumber



HPSA_ArrayController.CacheSerialNumber

HP_DeviceIndication


1-3-35 HP_DeviceIndication: Controller Cache Status - Not Configured


CIM_Indication




CIM_AlertIndication

Description A Smart Array Controller Cache status has changed to not configured. This may be caused by a configuration change.




EventID 12





RecommendedActions Check the cache controller error code and run diagnostics.



HP_AlertIndication

Summary Array controller cache status not configured



ProbableCauseDescription Array Controller Cache Status Changed to not configured












ImpactedDomain



Note:












HWLogicalLocation







VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-36 HP_DeviceIndication: Controller encryption self test status Changed to OK


CIM_Indication




CIM_AlertIndication



Description A Smart Array Controller encryption self test status has changed from non-OK to OK.




EventID 13



RecommendedActions No action needed



HP_AlertIndication

Summary Array controller encryption self test status OK


ProbableCause 0

ProbableCauseDescription Array Controller encryption self test status has changed to OK.




ProviderVersion

Provider version generating the indication in the format, <major>.<minor>.<revision>.<build>

For example: 2.2.0.0






ImpactedDomain



Note:






HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication



1-3-37 HP_DeviceIndication: Controller encryption self test status Changed to Failed


CIM_Indication




CIM_AlertIndication

Description A Smart Array Controller encryption self test status has changed to Failed because of encryption self tests failure




EventID 14



RecommendedActions Check the controller encryption error code and run diagnostics.



HP_AlertIndication

Summary Array controller encryption self test status failed





ProbableCauseDescription Array Controller encryption self test status has changed to failed.




ProviderVersion








ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)



VariableValues[]




HP_DeviceIndication


1-3-38 HP_DeviceIndication: Controller Encryption CSP NVRAM status Changed to OK


CIM_Indication




CIM_AlertIndication

Description A Smart Array Controller encryption CSP NVRAM status has changed from non-OK to OK.




EventID 15





RecommendedActions No action needed



HP_AlertIndication

Summary Array controller encryption CSP NVRAM status OK


ProbableCause 0

ProbableCauseDescription Array Controller encryption CSP NVRAM status has changed OK.




ProviderVersion










ImpactedDomain



Note:













For example:



Smart Array P600 in Slot 5



VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]




HP_DeviceIndication


1-3-39 HP_DeviceIndication: Controller Encryption CSP NVRAM status Changed to Failed


CIM_Indication






CIM_AlertIndication

Description A Smart Array Controller encryption CSP NVRAM status has changed to Failed because of CSP NVRAM dtection failure




EventID 16



RecommendedActions Check the controller encryption error code and run diagnostics.



HP_AlertIndication

Summary Array controller encryption CSP NVRAM status failed



ProbableCauseDescription Array Controller encryption CSP NVRAM status has changed to failed.






ProviderVersion








ImpactedDomain



Note:














HWLogicalLocation





VariableNames[]

FailureDescription

CacheSizeTotal

CacheSerialNumber


uint32 (5)

VariableValues[]






HP_DeviceIndication


1-3-40 HP_DeviceIndication: Enclosure Power Supply Status changed to Non Redundant


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Power Subsystem status has changed to non-redundant.

AlertingManagedElement WBEM Path of SMX_SAStorageEnclosureProcessor



EventID 301








HP_AlertIndication

Summary Power Supply status Non-Redundant



ProbableCauseDescription Redundant Power Supply Status Changed to Non-Redundant












ImpactedDomain



Note:











HWLogicalLocation

Enclosure Location string

For example: Port 1I Box 1


HP_DeviceIndication




1-3-41 HP_DeviceIndication: Enclosure Power Supply Status changed to OK (Redundant)


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Power Subsystem has changed to Fully Redundant.




EventID 302








HP_AlertIndication

Summary Redundant power supply status OK



ProbableCauseDescription Redundant Power Supply Status Changed to OK













ImpactedDomain



Note:










HWLogicalLocation




HP_DeviceIndication



1-3-42 HP_DeviceIndication: Enclosure Power Supply Status changed to Redundant Degraded


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Power Subsystem status has changed to Degraded Redundancy.




EventID 303






HP_AlertIndication

Summary Power supply status Redundant Degraded




ProbableCause 89 (Power supply failure)

ProbableCauseDescription Redundant Power Supply Degraded











ImpactedDomain



Note:













HWLogicalLocation




HP_DeviceIndication


1-3-43 HP_DeviceIndication: Enclosure Temperature sensor Status changed to OK




CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Temperature sensor status changed from non-OK to OK.




EventID 307






HP_AlertIndication

Summary Temperature sensor status OK





ProbableCauseDescription Temperature Status Changed to OK










ImpactedDomain



Note:













HWLogicalLocation




HP_DeviceIndication


1-3-44 HP_DeviceIndication: Enclosure Temperature sensor Status Changed to Warning


CIM_Indication






CIM_AlertIndication

Description

A Storage Enclosure Temperature sensor status changed to Warning Condition. This indicates the enclosure temperature is above normal, otherwise enclosure is still operating normally.




EventID 308



RecommendedActions




HP_AlertIndication

Summary Temperature sensor status Warning Condition



ProbableCauseDescription Temperature Status Changed to Warning Condition












ImpactedDomain



Note:













HWLogicalLocation




HP_DeviceIndication


1-3-45 HP_DeviceIndication: Enclosure Temperature sensor Status Changed to Critical


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Temperature sensor status has changed to Critical. An enclosure temperature is reaching the maximum allowed temperature for normal operation. A shutdown is imminent. Action is required



before loss of data occurs.




EventID 309



RecommendedActions




HP_AlertIndication

Summary Temperature sensor status Critical


ProbableCause 51 (Temperature Unacceptable )

ProbableCauseDescription Temperature Status Changed to Critical



OSVersion The operating system version of the computer system generating the

indication in the following format: <major>.<minor>.<build>







ImpactedDomain



Note:





HWLogicalLocation




HP_DeviceIndication


1-3-46 HP_DeviceIndication: Enclosure Fan Status Changed to OK


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Fan status has changed from a non-OK state to OK.






EventID 304






HP_AlertIndication

Summary Fan status OK



ProbableCauseDescription Fan Status Changed to OK












ImpactedDomain



Note:











HWLogicalLocation Enclosure Location string

For example:



Port 1I Box 1


HP_DeviceIndication


1-3-47 HP_DeviceIndication: Enclosure Fan Status changed to Degraded


CIM_Indication




CIM_AlertIndication

Description A Storage Enclosure Fan status has changed to Degraded. An enclosure has detected there may a problem with one or more of the fans.




EventID 305





RecommendedActions




HP_AlertIndication

Summary Fan status Degraded















ImpactedDomain



Note:











HWLogicalLocation






HP_DeviceIndication


1-3-48 HP_DeviceIndication: Enclosure Fan Status change to Failure


CIM_Indication




CIM_AlertIndication

Description

A Storage Enclosure Fan status changed to Failure. An enclosure has detected a failure in the fan subsystem and there is insufficient fan capability to ensure normal operation.




EventID 306



RecommendedActions Ensure that the system is adequately ventilated. Check for proper room temperature and internal/external airflow. Add or repair fans and air baffling if



necessary.



HP_AlertIndication

Summary Fan status Error



ProbableCauseDescription Fan Failure












ImpactedDomain



Note:











HWLogicalLocation






ImpactedDomain



Note:










HP_DeviceIndication


1-4 Physical Location The Physical Location is a string representing the Smart Array device physical location. This string should represent the physical location of the device with which an end-user can uniquely locate the device. Most of these strings will be represented in customer documentation, silkscreen labels, or hood tags.


All Systems HPE Integrity Cellular Servers HPE BladeServers in C3000

/ C7000 Enclosures

Slot=<num> Cabinet=<num> Blade=<num>

Embedded Controller=<logical_controller_id>



Chassis=<num> Mezzanine=<num> (I/O Mezzanines lot num)

1 HPE Insight Manager WBEM System Fan Provider Overview

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) System Fan provider implements and extends CIM classes described in this document to model the base server. These classes provide computational information and capabilities and serve as an aggregation point to associate one or more elements that make up a base server, such as: Fans, PowerSupplies, Processor and Memory (Volatile and/or NonVolatile Storage).


HP Fan Profile HP WBEM TC 1.3 .0(P102)

HP Location Profile HP WBEM TC 1.2.0 (P124)

HP Fan Physical Location Profile HP WBEM TC 1.1.0 (P115)

Requirements

For each hardware architecture listed, this provider requires the following distributions Note: This provider is not supported for x86 Superdome servers.













• SMX_Fan

• SMX_FanCollection

• SMX_FanRedundancySet

• SMX_MemberOfFanRedundancy

• SMX_HostedFanRedundancySet

• SMX_MemberOfFanCollection

• SMX_HostedFanCollection

• SMX_SystemFan

• SMX_FanLocation

• SMX_FanElementLocation

• SMX_FanModule

• SMX_SystemPhysicalFan

• SMX_RealizesFan

• SMX_FanSlot

• SMX_FanInSlot

• SMX_SystemFanSlot

• SMX_FanSpeedSensor

• SMX_AssociatedFanSensor

• SMX_SystemFanSensor

The tables in the following sections describe the properties of the supported classes. The classes are categorized by the class or superclass that defines the property, the first column is the Property Name (including type and units) and the second column describes how the provider determines the properties implementation. When the Property Implementation value is a number, the number given is the default

behavior and the Managed Object Format interpretation is within parenthesis. If other values are returned, a problem is indicated.


1-2-1 SMX_Fan Class The SMX_Fan class is used to model fans on servers. Fan numbers for existing instances do not change when other fans are added and removed.



CIM_ManagedElement

Caption

Short description of this fan from the name displayed by the MP or iLO and the location.

For example: Fan 1 at CabinetFan=01

Description

Description of this fan, including ElementName, FanType and StatusDescription[0].

For example: elementname provides cooling for fantype. statusdescription.

Where: <elementname> represents the value of ElementName, fantype represents the corresponding string value of the FanType enumeration and statusdescription represents the value of StatusDescriptions[0]

ElementName




OperationalStatus[0] 2 (OK) – if fan is operating properly;

3 (Degraded) – if fan is degraded


6 (Error) – if fan has failed


Description of the status of the fan corresponding to the OperationalStatus.

For example: Fan is operating properly– if OperationalStatus[0] is 2 (OK); Fan is degraded – if OperationalStatus[0] is 3 (Degraded) Fan has failed – if OperationalStatus[0] is 6 (Error)

HealthState

5 (OK) – if fan is operating properly;

10 (Degraded) - if fan is degraded

20 (Major Failure) – if fan has failed

Name



CIM_LogicalDevice

CreationClassName SMX_Fan

DeviceID Unique identifier for this fan instance.








CIM_CoolingDevice

ActiveCooling TRUE

CIM_Fan

VariableSpeed True – if fan supports variable speed

False – if fan does not support variable speed or is unknown

HP_Fan

FanType Enumeration describing the type of fan. Please refer to the Managed Object Format.

CurrentSpeed Speed of the fan in CurrentSpeedUnits

CurrentSpeedUnits Enumeration describing the units for CurrentSpeed. Please refer to the Managed Object Format.

1-2-2 SMX_FanCollection Class The SMX_FanCollection class is used to model fan collections on servers. There is one instance of this class on systems modeling fans.



CIM_ManagedElement

Caption Cooling Collection

Description

This is a collection of all devices including fans that provide cooling. GroupStatusDescription


ElementName Cooling Collection



InstanceID Unique identifier for this cooling collection instance.



Represents the most severe cooling redundancy status and non-fault tolerant fan operational status:

0 (Unknown) – if fan collection status is unknown;

2 (OK) – if fans are operating properly;

3 (Degraded) – if no SMX_Fan.OperationalStatus[0] for all non-fault tolerant fans report 6 (Error) and SMX_FanRedundancySet.RedundancyStatus for any cooling redundancy sets report 3 (Degraded Redundancy) or 4 (Redundancy Lost) and no cooling redundancy sets report 5 (Overall Failure).

6 (Error) – if SMX_Fan.OperationalStatus[0] for any non-fault tolerant fans report 6 (Error) or SMX_FanRedundancySet.RedundancyStatus for any cooling redundancy sets report 5 (Overall Failure).

Note:

If the system starts up with a redundancy status set to 4 (Redundancy Lost) and no fans have been removed or failed, the GroupOperationalStatus will be set to 2 (OK) because this is a valid configuration.


Unknown status for fans if GroupOperationalStatus[0] is 0 (Unknown);

Fans are operating properly if GroupOperationalStatus[0] is 2 (OK);

Fault tolerant fans are degraded if GroupOperationalStatus[0] is 3 (Degraded);

Fans have failed if GroupOperationalStatus[0] is 6 (Error)

1-2-3 SMX_FanRedundancySet Class The SMX_FanRedundancySet class is used to model fan redundancy sets on servers.


CIM_ManagedElement

Caption Short description of this redundancy set, for example: Cooling Redundancy Set <n>


Description

Description of this redundancy set

For example: Cooling Redundancy Set <n> is collection of fault tolerant fans that provide redundant cooling


ElementName

User printable name for this cooling redundancy set.

For example: Cooling Redundancy Set <n>



InstanceID Unique identifier for this cooling redundancy instance.

CIM_RedundancySet

MaxNumberSupported Represents the maximum number of fans supported for this redundancy set.

MinNumberNeeded Represents the minimum number of fans needed to function.

TypeOfSet 3 (Load Balanced)

LoadBalanceAlgorithm 0 (Unknown)

RedundancyStatus

0 (Unknown) – if the redundancy status is unknown;

2 (Fully Redundant) – if all fans in the set are operating properly and enough to achieve redundancy;

3 (Degraded Redundancy) – if there are at least enough fans for the redundancy set to provide cooling, but fans have failed;

4 (Redundancy Lost) – if there are not enough fans required to achieve redundancy, but enough for the redundancy set to provide cooling;

5 (Overall Failure) – if there are not enough fans operating properly for the redundancy set to provide cooling.

1-2-4 SMX_MemberOfFanRedundancy Class The SMX_MemberOfFanRedundancy class is used to represent an association between the HP_Fan and HP_FanRedundancySet classes. The following table lists the properties implemented.


Collection References HP_FanRedundancySet

Member References HP_Fan

1-2-5 SMX_HostedFanRedundancySet Class The SMX_HostedFanRedundancySet class is used to represent an association between HP_FanRedundancySet and the computer system that contains this redundancy set.



OwningElement References HP_ComputerSystem

OwnedElement References HP_FanRedundancySet

1-2-6 SMX_MemberOfFanCollection Class The SMX_MemberOfFanCollection class is used to represent an association between the HP_Fan and HP_FanCollection classes.



Collection References HP_FanCollection

Member References HP_Fan

1-2-7 SMX_HostedFanCollection Class The SMX_HostedFanCollection class is used to represent an association between HP_FanCollection and the computer system that contains this collection.




Dependent References HP_FanCollection

1-2-8 SMX_SystemFan Class The SMX_SystemFan class is used to represent an association between HP_Fan and the computer system that contains this fan.




PartComponent References HP_Fan

1-2-9 SMX_FanLocation Class The SMX_FanLocation class is used to model fan locations on servers.



CIM_ManagedElement

Caption

Short description of this fan location, including the name displayed by the MP or iLO.

For example on HPE ProLiant: Fan 1 at CabinetFan=01

Description

Description of this fan location, including the name displayed by the MP or iLO.

For example on HPE ProLiant: The location of the Fan 1. Please refer to the fan position CabinetFan=01 printed on the system.

ElementName

User displayable name of this fan location, including the name displayed by the MP or iLO.

For example on HPE ProLiant: Fan 1 at CabinetFan=01

CIM_Location

Name Unique identifier for this fan location instance.

PhysicalPosition Opaque identifier for the physical position of this fan

HP_Location


ElementLocationTag Location string based on ElementLocationTagDesc.

For example, on HPE ProLiant: CabinetFan=01

ElementLocationTagDesc On HPE ProLiant: 0 (HoodTag)

LocationInfoDesc Array of location descriptions:

Eg: On ProLiant DL Server: 4 (Socket)

LocationInformation Array of string descriptions of the location based on LocationInfoDesc

1-2-10 SMX_FanElementLocation Class The SMX_FanElementLocation class is used to represent an association between the CIM_Location and CIM_ManagedElement classes.



Element References HP_FanModule

PhysicalLocation References SMX_FanLocation

1-2-11 SMX_FanModule Class The SMX_FanModule class is used to model physical fans on servers. Fan numbers for existing instances do not change when other fans are added and removed.



CIM_ManagedElement

Caption Short description of this fan from the name displayed by the MP or iLO and location.

For example:

Fan 1 at CabinetFan=01

Description

Description of this fan module, including ElementName, type and status.

For example: <ElementName> provides cooling for FanType. <StatusDescription>

Where: <ElementName> represents the value of ElementName, FanType represents the corresponding string value of the FanType enumeration and <StatusDescription> represents the value of StatusDescriptions[0].

ElementName Name of this fan from the name displayed by the MP or iLO and location.





3 (Degraded) – if fan is degraded;

6 (Error) – if fan has failed


Description of the status of the fan corresponding to the OperationalStatus.

For example: Fan is operating properly – if OperationalStatus[0] is 2 (OK);

Fan is degraded – if OperationalStatus[0] is 3 (Degraded)

Fan has failed – if OperationalStatus is 6 (Error)

HealthState


10 (Degraded) if fan is degraded

20 (Major Failure) – if fan has failed

Name Name of this fan module.


CIM_PhysicalElement

CreationClassName SMX_FanModule

Tag Unique identifier for this fan instance.

CIM_PhysicalPackage

RemovalConditions

0 (Unknown)



PackageType 7 (Fan)

1-2-12 SMX_SystemPhysicalFan Class The SMX_SystemPhysicalFan class implements the HP_SystemPhysicalFan class and association the HP_ComputerSystemChassis instance with HP_FanModule.




PartComponent References HP_FanModule

1-2-13 SMX_RealizesFan Class The SMX_RealizesFan class implements the HP_RealizesFan class and associates the HP_Fan instance with HP_FanModule instances.



Antecedent References HP_FanModule

Dependent References HP_Fan

1-2-14 SMX_FanSlot Class The SMX_FanSlot class is used to model physical fan slots on servers.



CIM_ManagedElement

Caption Short description of this fan slot, to include the number and location.


Description Description of the fan slot.


ElementName Name of the fan slot.



OperationalStatus[0] 2 (OK) – if fan slot is operating properly;

StatusDescriptions[0] Fan slot is operating properly – if OperationalStatus[0] is 2 (OK);

HealthState 5 (OK) – if fan is operating properly;

Name Name of the fan slot.


CIM_PhysicalElement

CreationClassName SMX_FanSlot

Tag Unique identifier for this fan slot.

CIM_PhysicalPackage


Number <n>

Where: <n> represents the number of the fan slot.

1-2-15 SMX_SystemFanSlot Class The SMX_SystemFanSlot class implements the HP_FanSlot class and association the HP_ComputerSystemChassis instance with HP_FanSlot.




PartComponent References HP_FanSlot

1-2-16 SMX_FanInSlot Class The SMX_FanInSlot class implements the HP_FanInSlot class and associates the HP_FanSlot instance with HP_FanModule instances.



Antecedent References HP_FanSlot

Dependent References HP_FanModule

1-2-17 SMX_FanSpeedSensor SMX_FanSpeedSensor implements CIM_NumericSensor and is used to model fan tachometer sensors on Servers.


CIM_ManagedElement

Caption

Short description of the fan speed sensor from the name displayed by the MP or iLO and the location.

For example: Fan speed sensor for Fan 1 at CabinetFan=01

Description

Description of the fan speed sensor including name displayed by the MP or iLO, the location, and status.

For example: Fan 1 detects fan speed. Located at CabinetFan=01. Fan speed sensor is operating properly.

ElementName

Short description of the fan speed sensor from the name displayed by the MP or iLO and the location.



OperationalStatus[0] 2 (OK) – if fan sensor is operating properly

StatusDescriptions[0] Fan speed sensor is operating properly—if OperationalStatus[0] is 2 (OK)

HealthState 5 (OK) – if fan sensor is operating properly

Name

Name of fan speed sensor from the name displayed by the MP or iLO and the location.


CIM_LogicalDevice

CreationClassName SMX_FanSpeedSensor

DeviceID Unique identifier for fan slot.








CIM_Sensor

SensorType 5 (Tachometer)

CurrentState Normal

PossibleStates Array can contain any of the following values:

PossibleStates[0] = ”Normal”;

CIM_NumericSensor

CurrentReading Current reading of fan speed sensor

BaseUnits 19 (RPM)

65 (Percentage)

RateUnits 0 (None)

UnitModifier 0

1-2-18 SMX_SystemFanSensor SMX_SystemFanSensor is used to represent an association between SMX_FanSpeedSensor and the computer system that contains this fan sensor.



PartComponent References SMX_FanSpeedSensor

1-2-19 SMX_AssociatedFanSensor SMX_AssociatedFanSensor is used to represent an association between HP_Fan and the SMX_FanSpeedSensor that is reporting the speed of the fan.


Antecedent References SMX_FanSpeedSensor

Dependent References SMX_Fan


The following tables describe the SMX WBEM System Fan Provider indications that are implemented for HPE ProLiant server platforms, where available.

Note: Some HPE ProLiant servers do not support Fan Degraded or Fan Redundancy Failed indications.


CIM_Indication



CIM_AlertIndication




HP_AlertIndication


ProviderVersion
















RackUUID Rack Unique Identifier, if one exists

The following indications are implemented for Proliant server platforms where available. System Fan indications are described below.

1-3-2 HP_DeviceIndication: Fan Removed Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description A fan has been removed <Fan>

Where: <Fan> is the fan number that was removed.

AlertingManagedElement WBEM Path of the SMX_Fan instance.



EventID 1

ProviderName HP Cooling

RecommendedActions Check the fan configuration and ensure that this fan was removed intentionally.

HP_AlertIndication

Summary Fan removed

ProbableCauseDescription Fan Removed

1-3-3 HP_DeviceIndication: Fan Inserted Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A fan has been inserted. <FanCaption>

Where: <FanCaption> is the SMX_Fan.Caption for the fan that has been inserted.

AlertingManagedElement WBEM Path of SMX_Fan instance representing the inserted fan.



EventID 2



HP_AlertIndication

Summary Fan inserted

ProbableCauseDescription Fan inserted

1-3-4 HP_DeviceIndication: Fan Failed Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A fan has failed. <FanCaptio>

Where: <FanCaption> is the SMX_Fan.Caption for the fan that has failed.

AlertingManagedElement WBEM Path of SMX_Fan instance representing the failed fan.



EventID 3


RecommendedActions Please Check the failed fan and replace if necessary.

HP_AlertIndication

Summary Fan failed


ProbableCause 94 (Fan Failure)

ProbableCauseDescription Fan Failed

1-3-5 HP_DeviceIndication: Fan Repaired Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A fan has been repaired. The fan is now operating properly. <FanCaption> Where: <FanCaption> is the SMX_Fan.Caption for the fan that has been repaired.

AlertingManagedElement WBEM Path of SMX_Fan instance representing the failed fan.



EventID 4



HP_AlertIndication

Summary Fan repaired



ProbableCauseDescription Fan Repaired

1-3-6 HP_DeviceIndication: Fan Degraded .

CIM_Indication


CIM_AlertIndication

Description

A fan has degraded. <FanCaption>

Where: <FanCaption> is the SMX_Fan.Caption for the fan that has degraded.

AlertingManagedElement WBEM Path of SMX_Fan instance representing the degraded fan.



EventID 9


RecommendedActions Check the degraded fan and replace if necessary.

HP_AlertIndication

Summary Fan degraded




1-3-7 HP_DeviceIndication: Fan Redundancy Reduce Property Name Property Implementation

CIM_Indication

CIM_AlertIndication

Description

A fault tolerant fan is no longer providing cooling for a cooling redundancy set. <RedundancySetCaptio>)

Where: <RedundancySetCaption> represents the SMX_FanRedundancySet.Caption for the redundancy set with reduced redundancy.

AlertingManagedElement WBEM Path of SMX_FanRedundancySet instance representing the redundancy set with reduced redundancy.



EventID 5



HP_AlertIndication

Summary Cooling redundancy reduced



ProbableCauseDescription Cooling Redundancy has been Reduced

1-3-8 DeviceIndication: Fan Redundancy Lost Property Name Property Implementation

CIM_Indication

CIM_AlertIndication

Description

Cooling redundancy has been lost. <RedundancySetCaptio>)

Where: <RedundancySetCaption> represents the SMX_FanRedundancySet.Caption for the redundancy set that lost redundancy.

AlertingManagedElement WBEM Path of SMX_FanRedundancySet instance representing the redundancy set where redundancy was lost.



EventID 6


RecommendedActions Check the fan configuration and check the status of the cooling redundancy. Ensure the system is being cooled adequately. Add or replace fans if necessary.

HP_AlertIndication

Summary Cooling redundancy lost



ProbableCauseDescription Cooling Redundancy has been Lost

1-3-9 HP_DeviceIndication: Fan Redundancy Restored Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

Cooling redundancy for the system has been restored. (RedundancySetCaption)

Where: RedundancySetCaption is SMX_FanRedundancySet.Caption of the cooling redundancy set with restored redundancy.

AlertingManagedElement WBEM Path of SMX_FanRedundancySet instance representing the cooling redundancy set with restored redundancy.



EventID 8



HP_AlertIndication

Summary Cooling redundancy restored



ProbableCauseDescription Cooling Redundancy has been Restored

1-3-10 HP_DeviceIndication: Fan Redundancy Failed Important:

This indication is not supported on HPE ProLiant systems because redundancy set failure, which is failure beyond redundancy lost, will cause system shutdown.



CIM_Indication


CIM_AlertIndication

Description

Cooling redundancy for the system has failed. (RedundancySetCaption)

Where: RedundancySetCaption is SMX_FanRedundancySet.Caption of the cooling redundancy set with failed redundancy.

AlertingManagedElement WBEM Path of SMX_FanRedundancySet instance representing the cooling redundancy set with failed redundancy.



EventID 10


RecommendedActions Check the fan configuration and check the status of the cooling redundancy. Ensure the system is being cooled adequately. Add or replace fans if necessary.

HP_AlertIndication

Summary Cooling redundancy set failed



ProbableCauseDescription Cooling Redundancy Set has Failed

HPE Insight Management WBEM System Memory Provider 1

1 HPE Insight Management WBEM System Memory Provider

Description

The HPE Insight Management Web-Based Enterprise Management (WBEM) System Memory provider implements the HP Memory Profile and HP Memory Physical Asset Profile to represent system memory on HPE servers.



HP Memory Profile HP WBEM TC 1.0

HP Memory Physical Asset Profile HP WBEM TC 2.3.0

HP Location Profile HP WBEM TC 1.2.0

Requirements







1-1 Setting Up the Provider Installing the There are no special installation instructions for this provider. It is installed by default as


Provider part of the HPE Insight Management WBEM providers.





• SMX_Memory

• SMX_SystemMemory

• SMX_MemoryModule

• SMX_MemoryBoard

• SMX_RealizesMemoryModule

• SMX_MemoryModuleSlot

• SMX_MemoryBoardSlot

• SMX_MemoryModuleInSlot

• SMX_MemoryBoardInSlot

• SMX_MemoryModuleSlotOnBoard

• SMX_MemoryModuleSlotLocation

• SMX_MemoryBoardSlotLocation

• SMX_MemoryModuleSlotElementLocation

• SMX_MemoryBoardSlotElementLocation

• SMX_SystemMemoryModule

• SMX_SystemMemoryBoard

• SMX_MemoryRedundancySet

• SMX_MemoryCollection

• SMX_HostedMemoryCollection


• SMX_MemberOfMemoryCollection

• SMX_MemberOfMemoryRedundancySet

• SMX_HostedMemoryRedundancySet

• SMX_SystemMemoryModuleSlot

• SMX_SystemMemoryBoardSlot

• SMX_MemoryModuleOnBoard



1-2-1 SMX_Memory Class The SMX_Memory class represents logical memory on HPE servers. There is one instance of this class.



CIM_ManagedElement

Caption System Memory

Description Logical system memory

ElementName System Memory




OperationalStatus

Enumerator indicating the logical system memory operational status.

The status represents the ‘worst-of’ algorithm for all OperationalStatus[0] values reported by physical memory modules in SMX_MemoryModule instances.

OperationalStatus[0] (shown in order of increasing severity; a higher severity overrides a lower severity):

2 (OK), when all physical memory modules report 2 (OK)

0 (Unknown), when any physical memory module reports 0 (Unknown)

3 (Degraded), when any physical memory module reports 3 (Degraded)

NOTE: This status does not represent the overall status of the memory system; refer to the SMX_MemoryCollection class for overall memory system status.

StatusDescriptions

StatusDescriptions[0]contains descriptive text per OperationalStatus[0]:

OK

Unknown

Degraded

HealthState

5 (OK), when OperationalStatus[0] = 2 (OK)

0 (Unknown), when OperationalStatus[0] = 0 (Unknown)


Name System Memory

CIM_LogicalElement







CIM_LogicalDevice

CreationClassName SMX_Memory

DeviceID HPQ:SMX_Memory:000

SystemCreationClassName Same value as SMX_ComputerSystem.CreationClassName property

SystemName Same value as SMX_ComputerSystem.Name property

CIM_StorageExtent

Access 3 (Read/Write Supported)

BlockSize 1 (byte)

ConsumableBlocks Capacity in bytes

NumberOfBlocks Capacity in bytes

Primordial TRUE

Purpose System Memory

SequentialAccess FALSE

CIM_Memory

StartingAddress Beginning address of the memory in kilobytes

EndingAddress Ending address of the memory in kilobytes

Volatile TRUE

HP_Memory

SMX_Memory

1-2-2 SMX_SystemMemory Class The SMX_SystemMemory class represents an association between SMX_Memory and the computer system that contains the memory. There is one instance of this class.



CIM_SystemDevice

HP_SystemMemory


PartComponent References SMX_Memory

SMX_SystemMemory

1-2-3 SMX_MemoryModule Class The SMX_MemoryModule class represents a physical memory module on HPE servers. There is an instance of this class for each memory module present in the system; empty memory module sockets are not instantiated.


Note: In the following property implementation descriptions, memory modules located on the system board are denoted as being located on board/cartridge number 0.


CIM_ManagedElement

Caption Physical Memory Module <physical location>.

OperationalStatus

Enumerator indicating the memory module operational status.

OperationalStatus[0] contains overall memory module status

OperationalStatus[1] contains detailed memory module status (as needed)

For details, see “Properties for Memory Module Status”.

StatusDescriptions



For details, see “Properties for Memory Module Status”.

HealthState

Enumerator indicating the memory module health state:

0 (Unknown), when OperationalStatus[0] = 0 (Unknown)


10 (Degraded/Warning), when OperationalStatus[0] = 3 (Degraded)

Name Physical Memory Module <physical location>.


CIM_PhysicalElement

CreationClassName SMX_MemoryModule

Tag Opaque key of the form "HPQ:SMX_MemoryModule: <unique keys>

Description Physical Memory Module <physical location>.


ElementName Physical Memory Module <physical location>.



Manufacturer

Name of the organization that produced the memory module.

For example: HPE

This property is conditional; it is populated if the data is available.

PartNumber Part number of the memory module.


SerialNumber Manufacturer allocated serial number of the memory module.


CIM_PhysicalComponent

RemovalConditions 3 (Removable when off)

CIM_Chip

CIM_PhysicalMemory

DataWidth Data width of memory module in bits

Capacity Total capacity of memory module in bytes

InterleavePosition

Position of memory module in an interleave. This property is conditional; it will be populated if the data is available. (Supported only for Proliant servers )

IsSpeedInMhz

The IsSpeedInMHz property is used to indicate if the Speed property or the MaxMemorySpeed contains the value of the memory speed. A value of TRUE shall indicate that the speed is represented by the MaxMemorySpeed property.A value of FALSE shall indicate that the speed is represented by the Speed property

TotalWidth Total width of memory module in bits

Speed Speed of memory module in nanoseconds. Speed is set to 0 if the property is

IsSpeedInMhz=TRUE.

MaxMemorySpeed The maximum speed in MHz of PhysicalMemory

MemoryType Enumerator indicating the type of memory module.

Refer to MOF file for details.

PositionInRow Position of memory module in a row. This property is conditional; it is populated if the data is available (Supported only on Proliant servers)

FormFactor

Enumerator indicating the form factor of the memory module.


For example: 8 (DIMM)

BankLabel

String identifying the physically labeled bank where the memory is located.

For examples: 'DIMM 0A' or 'PROC 1 DIMM 0A' or 'Board 1,0A' or 'Board 1,DIMM 1A (Upper Tray, Riser 1)'

For examples on x86 Superdome Systems: <deviceLocator bankLocator>,


SMX_MemoryModule

Spd

An array that contains raw Serial Presence Detect information for the memory module. Each array element contains a byte of the Spd.


Type

Type of the memory modules. Enumerator indicating the type of memory module.

Refer to MOF file for details

Ranks The number of physical ranks on the module.

Technology Enumerator indicating the type of technology of memory module.


MinimumVoltage This value specifies the minimum voltage needed for the memory module to operate in milivolts.

1-2-3-1 Properties for Memory Module Status

Condition

OperationalStatus[0] OperationalStatus[1]

StatusDescriptions[0] StatusDescriptions[1]

Memory module status is unknown

0 (Unknown) <not populated>

Unknown <not populated>

Memory module is operating properly

2 (OK) <not populated>

OK <not populated>

Memory module is present but is not currently used by the operating system

2 (OK) 15 (Dormant)

OK Memory module status: Memory present but not in use

Memory module has correctable errors exceeding the condition for pre-failure warranty

3 (Degraded) 5 (Predictive Failure)

Degraded Memory module status: Correctable error threshold for pre-failure warranty has been exceeded

1-2-4 SMX_MemoryBoard Class The SMX_MemoryBoard class represents a physical memory board on HPE servers. There is an instance of this class for each memory module present in the system; empty memory module sockets are not instantiated.



CIM_ManagedElement

Caption Physical Memory <physical location>.



OperationalStatus

Enumerator indicating the memory board operational status.

OperationalStatus[0] contains overall memory board status

OperationalStatus[1] contains detailed memory board status (as needed)

For details, see “Properties for Memory Board Status”.

StatusDescriptions



For details, see “Properties for Memory Board Status”.

HealthState

Enumerator indicating the memory board health state:

0 (Unknown), when OperationalStatus[0]= 0 (Unknown)


10 (Degraded/Warning), when OperationalStatus[0] = 3 (Degraded)

Name Physical Memory <physical location>.

CIM_PhysicalElement

CreationClassName SMX_MemoryBoard

Tag Opaque key of the form: HPQ:SMX_MemoryBoard: <unique_keys>

Description Physical Memory <physical location>.


ElementName Physical Memory <physical location>.


CIM_PhysicalPackage

RemovalConditions

Removal conditions of the memory board:

0 (Unknown)

When the memory board is the system board:

2 (Not Applicable)

When the memory board is not the system board:



PackageType 9 (Module/Card)

CIM_Card

HostingBoard True – memory board is on the baseboard.

False – memory board not on the baseboard

SMX_MemoryBoard

Locked

Indicates the locked state of the memory board:

1 (Not-Applicable), non-AMP systems only

2 (Unlocked)

3 (Locked)

NumberOfSockets Number of memory module sockets on this board

AvailableMemory Size of memory for this board seen by the operating system in MB

TotalMemory Total size of memory for this board in MB

1-2-4-1 Properties for Memory Board Status

Condition OperationalStatus[0] OperationalStatus[1]


Memory board status is unknown 0 (Unknown) <not populated>

Unknown <not populated>

Memory board is operating properly

2 (OK) <not populated>

OK <not populated>

Memory board contains a memory module that has correctable errors exceeding the condition for pre-failure warranty.

3 (Degraded) 5 (Predictive Failure)

Degraded

Memory board status: Correctable error threshold for pre-failure warranty has been exceeded

Memory board has a configuration error, e.g. there is a problem with the board release latch (unlock error) or there is an improper configuration of memory modules

3 (Degraded) 3 (Degraded)

Degraded Memory board status: Configuration error

Condition OperationalStatus[0] OperationalStatus[1]


on the board.

1-2-5 SMX_RealizesMemoryModule Class The SMX_RealizesMemoryModule class represents an association between SMX_MemoryModule and SMX_Memory.



CIM_Realizes

HP_RealizesMemoryModule

SMX_RealizesMemoryModule

Antecedent References SMX_MemoryModule

Dependent References SMX_Memory

1-2-6 SMX_MemoryModuleSlot Class The SMX_MemoryModuleSlot class represents memory module slots on HPE servers. There is an instance of this class for each memory module socket in the system (whether the slot is occupied or not).

Note: In the following property implementation descriptions, memory module slots located on the system board are denoted as being located on board/cartridge number 0.



CIM_ManagedElement

Caption Memory Module <physical location>.

OperationalStatus OperationalStatus[0] = 2 (OK)

StatusDescriptions StatusDescriptions[0] = Memory module slot status:OK

HealthState 5 (OK)

Name Memory Module <physical location>.


CIM_PhysicalElement

CreationClassName SMX_MemoryModuleSlot

Tag Opaque key of the form: HPQ:SMX_MemoryModuleSlot: <unique_keys>

Description Memory Module <physical location>.


ElementName Memory Module <physical location>.



ConnectorLayout 1 (Other)

ConnectorGender 3 (Female)

ConnectorDescription Memory Module <physical location>.


CIM_Slot

Number The memory socket number where the memory slot is located.

Note: Not unique on HPE Cellular servers.

SMX_MemoryModuleSlot

1-2-7 SMX_MemoryBoardSlot Class The SMX_MemoryBoardSlot class represents memory board slots on HPE servers. There is an instance of this class for each memory board slot in the system (whether the slot is occupied or not).



CIM_ManagedElement

Caption Memory Board Slot <physical location>.



OperationalStatus OperationalStatus[0] = 2 (OK)

StatusDescriptions StatusDescriptions[0] = Memory board slot status: OK

HealthState 5 (OK)

Name Memory Board Slot <physical location>.


CIM_PhysicalElement

CreationClassName SMX_MemoryBoardSlot

Tag Opaque key of the form: HPQ:SMX_MemoryBoardSlot: <unique_keys>

Description Memory Board Slot <physical location>.

ElementName Memory Board Slot <physical location>.



Memory Board Slot <physical location>.



ConnectorLayout 1 (Other)

ConnectorDescription Memory Board Slot <physical location>.


CIM_Slot

Number

The board/cartridge number where the memory board is located.

For HP x86 Superdome and HP cellular servers, for example for Processor Board=1 Blade=3, the number will be 31 (10 * <Blade> + <Processor Board>).

SMX_MemoryBoardSlot

1-2-8 SMX_MemoryModuleInSlot Class The SMX_MemoryModuleInSlot class represents the association between an SMX_MemoryModule and the SMX_MemoryModuleSlot where it resides.



CIM_ElementInConnector


HP_MemoryModuleInSlot

SMX_MemoryModuleInSlot

Antecedent References SMX_MemoryModuleSlot

Dependent References SMX_MemoryModule

1-2-9 SMX_MemoryBoardInSlot Class The SMX_MemoryBoardInSlot class represents the association between an SMX_MemoryBoard and the SMX_MemoryBoardSlot where it resides.



CIM_PackageInConnector

HP_MemoryBoardInSlot

SMX_MemoryBoardInSlot

Antecedent References SMX_MemoryBoardSlot

Dependent References SMX_MemoryBoard

1-2-10 SMX_MemoryModuleSlotOnBoard Class The SMX_MemoryModuleSlotOnBoard class represents an association between a SMX_MemoryModuleSlot and the SMX_MemoryBoard that contains it.



CIM_Container

HP_MemoryModuleSlotOnBoard

SMX_MemoryModuleSlotOnBoard

GroupComponent References SMX_MemoryBoard

PartComponent References SMX_MemoryModuleSlot

1-2-11 SMX_MemoryModuleSlotLocation Class The SMX_MemoryModuleSlotLocation class extends the CIM_Location class and represents memory module slot locations on HPE servers. There is an instance of this class for each memory module slot in the system (whether the slot is occupied or not).



CIM_ManagedElement

Caption Memory Module Socket Location <physical location>.


Description Memory Module Socket Location <physical location>.


ElementName Memory Module Socket Location <physical location>.


CIM_Location

Name

Opaque key of the format:

HPQ:SMX_MemoryModuyleSlotLocation:<Key 1>: <Key 2>: ...etc.

For example on x86 Superdome servers, for “Socket=24A memory for Processor Board=1 Blade=7 Enclosure=1”: HPQ:SMX_MemoryModuyleSlotLocation:1-7-1-24A

PhysicalPosition

Opaque key.

Example for memory socket number 2 on cpu, board, or cartridge number 1:

FF-FF-FF-FF-01-02-FF-79

Example on x86 Superdome servers, for “Socket=24A memory for



Processor Board=1 Blade=7 Enclosure=1”: 01-00-FF-07-01-24-0A-79

HP_Location

ElementLocationTag

Opaque key.

Example for memory socket number 2 on cpu, board, or cartridge number 1:

FF-FF-FF-FF-01-02-FF-79

Example on x86 Superdome servers, for “Socket=24A memory for Processor Board=1 Blade=7 Enclosure=1”: 01-00-FF-07-01-24-0A-79

ElementLocationTagDesc 8 (Memory Module)

LocationInformation

Indexed array: LocationInformation[0] per LocationInformationDesc[0].

Location information will contain a numeric string representing the unique location identifier of each object type described by the corresponding LocationInfoDesc index.

LocationInfoDesc

Array indices will report as many of the following enumerated values as are applicable:

4 (Socket)

5 (Memory Board)

7 (Cabinet)

10 (Cell)

14 (BladeBay)

15 (ProcessorBoard)

SMX_MemoryModuleSlotLocation

1-2-12 SMX_MemoryBoardSlotLocation Class The SMX_MemoryBoardSlotLocation class extends the CIM_Location class and represents memory board slot locations on HPE servers. There is an instance of this class for each memory board slot in the system (whether the slot is occupied or not).



CIM_ManagedElement

Caption Memory Board Slot Location <physical location>. Refer to “Physical Location” for more information.

Description Memory Board Slot Location <physical location>.


ElementName Memory Board Slot Location <physical location>.


CIM_Location

Name

Opaque key of the form: HPQ:SMX_MemoryBoardSlotLocation: <unique_keys>.

For example on x86 Superdome servers, for “memory for Processor Board=1 Blade=7 Enclosure=1”: HPQ:SMX_MemoryBoardSlotLocation:1-7-1

PhysicalPosition

Opaque key.

For example, for memory board, cartridge, or processor number 1:

FF-FF-FF-FF-01-FF-FF-7A

For example on x86 Superdome servers, for “memory for Processor Board=1 Blade=7 Enclosure=1”: 01-00-FF-07-01-FF-FF-71

HP_Location

ElementLocationTag

Opaque key.

For example, for memory board, cartridge, or processor number 1:

FF-FF-FF-FF-01-FF-FF-7A

For example on x86 Superdome servers, for “memory for Processor Board=1 Blade=7 Enclosure=1”: 01-00-FF-07-01-FF-FF-71

ElementLocationTagDesc 9 (Memory Board) / 13 (Processor Board)

LocationInformation

LocationInformation[0] text: <x>

Where: <x> is the board/cartridge/processor number

Location information will contain a numeric string representing the unique location identifier of each object type described by the corresponding LocationInfoDesc index.

For x86 Superdome servers,

LocationInformation[0] is the ProcessorBoard number.

LocationInformation[1] is the Blade number.

LocationInformation[2] is the Enclosure number.

LocationInfoDesc

Array indices will report as many of the following enumerated values as are applicable:

5 (Memory Board)

7 (Cabinet)

10 (Cell)

14 (BladeBay)

15 (ProcessorBoard)

SMX_MemoryBoardSlotLocation


1-2-13 SMX_MemoryModuleSlotElementLocation Class The SMX_MemoryModuleSlotElementLocation class extends the CIM_ElementLocation class and is used to associate a memory module slot (SMX_MemoryModuleSlot) with its corresponding location (SMX_MemoryModuleSlotLocation). There is an instance of this class for each memory module slot in the system (whether the slot is occupied or not).



CIM_ElementLocation

HP_ElementLocation

SMX_MemoryModuleSlotElementLocation

Element References SMX_MemoryModuleSlot

PhysicalLocation References SMX_MemoryModuleSlotLocation

1-2-14 SMX_MemoryBoardSlotElementLocation Class The SMX_MemoryBoardSlotElementLocation class extends the CIM_ElementLocation class and is used to associate a memory board slot (SMX_MemoryBoardSlot) with its corresponding location (SMX_MemoryBoardSlotLocation). There is an instance of this class for each memory board slot in the system (whether the slot is occupied or not).



CIM_ElementLocation

HP_ElementLocation

SMX_MemoryBoardSlotElementLocation

Element References SMX_MemoryBoardSlot

PhysicalLocation References SMX_MemoryBoardSlotLocation


1-2-15 SMX_SystemMemoryModule Class The SMX_SystemMemoryModule class represents an association between SMX_MemoryModule and SMX_ComputerSystemChassis. There is an instance of this class for each memory module slot on the chassis system board (whether the slot is occupied or not). Only system board resident memory module slots are instantiated.



CIM_Container

HP_SystemMemoryModule

SMX_SystemMemoryModule


PartComponent References SMX_MemoryModule

1-2-16 SMX_SystemMemoryBoard Class The SMX_SystemMemoryBoard class represents an association between SMX_MemoryBoard and SMX_ComputerSystemChassis. There is an instance of this class for each memory board slot in the chassis (whether the slot is occupied or not).



CIM_Container

HP_SystemMemoryBoard

SMX_SystemMemoryBoard


PartComponent References SMX_MemoryBoard


1-2-17 SMX_MemoryRedundancySet Class The SMX_MemoryRedundancySet class represents memory board redundancy on HPE servers supporting Advanced Memory Protection (AMP). There is one instance of this class on systems supporting AMP. This class is not instantiated on non-AMP systems.



CIM_ManagedElement

Caption Memory Redundancy Set

Description Memory Redundancy Set for Advanced Memory Protection

ElementName Memory Redundancy Set


InstanceID HPQ:SMX_MemoryRedundancySet:001

CIM_RedundancySet

TypeOfSet

Represents the type of redundancy currently in operation for the Advanced Memory Protection system. This property corresponds functionally to the property CurrentConfiguration.

TypeOfSet[0] contains the current type of redundancy:

1 (Other), when the system is operating in Advanced ECC or Lockstep mode

2 (N+1), when the system is operating in RAID (XOR) mode

3 (Load Balanced), when the system is operating in Mirrored mode

4 (Sparing), when the system is operating in Online Spare mode

OtherTypeOfSet

OtherTypeOfSet[0] contains the type of redundancy when the property TypeOfSet[0] = 1 (Other). In this case, the property will contain the value Advanced ECC or Lockstep, otherwise the property is not populated.




RedundancyStatus

Represents the current memory redundancy status as follows:

2 (Fully Redundant)

System is operating properly in the Advanced Memory Protection mode given in the TargetConfiguration property.

3 (Degraded Redundancy)

Degraded Redundancy can occur in either of the following conditions:

• System is not operating in the TargetConfiguration mode (the

CurrentConfiguration mode does not match the TargetConfiguration mode).

• System is operating in the TargetConfiguration mode but memory module(s) have correctable errors exceeding the condition for pre-failure warranty.

HP_MemoryRedundancySet

OperatingSpeed The current operating speed of the Advanced Memory Protection subsystem in MHz

AvailableMemory The size of the memory as seen by the operating system in MB

TotalMemory Total size of memory as seen by the operating system and memory used for Advanced Memory Protection configurations in MB

CurrentConfiguration

The current operating mode of the Advanced Memory Protection system.

The value in this property is CurrentConfigurations [0] and corresponds to the value populated in the property TypeOfSet[0]

CurrentConfiguration is one of the following:

Advanced ECC, when the system is operating in Advanced ECC mode

RAID, when the system is operating in RAID (XOR) mode

Mirrored, when the system is operating in Mirrored mode

Online Spare, when the system is operating in Online Spare mode



Lockstep when the system is operating in Lockstep mode

CurrentConfigurations

An array containing values which specify the current ‘Advanced Memory Protection’ Fault Tolerance configurations that are operating on the system. These are always one of the Configurations Available.

OperatingVoltage The current operating speed of the Advanced Memory Protection subsystem in milivolts.

TargetConfiguration

The desired or targeted mode of the Advanced Memory Protection system.

The value in this property is TargetConfigurations [0].

TargetConfiguration is one of the following:

Advanced ECC, when the system is configured for Advanced ECC mode

RAID, when the system is configured for RAID (XOR) mode

Mirrored, when the system is configured for Mirrored mode

Online Spare, when the system is configured for Online Spare mode



Lockstep when the system is configured for Lockstep mode

TargetConfigurations

An array containing values which specify the RBSU selected Advanced Memory Protection Fault Tolerance configurations that are available on the system. These are always one of the Configurations Available.

ConfigurationsAvailable

An array containing Advanced Memory Protection configurations supported on this system (the CurrentConfiguration and TargetConfiguration properties will contain one of these values). Each indexed position in the array contains one supported configuration.

Possible values are:

Advanced ECC

Online Spare

Mirrored

RAID

Lockstep

Mirrored Single Board

Mirrored Dual Board

XOR

Online Spare Channel

Online Spare Rank



Mirroring Intra Socket

Mirroring Inter Socket

1-2-18 SMX_MemoryCollection Class The SMX_MemoryCollection class represents physical memory collections on HPE servers. The collection comprehends physical memory modules and boards as components of the collection. There is one instance of this class.



CIM_ManagedElement

Caption Memory Collection

Description Physical memory collection

ElementName Memory Collection


InstanceID HPQ:SMX_MemoryCollection:001





Enumerator indicating the group operational status of the memory collection. The status is determined as follows:

• If an instance of SMX_MemoryRedundancySet exists, GroupOperationalStatus[0] is determined from the property SMX_MemoryRedundancySet.RedundancyStatus.

• If no instance of SMX_MemoryRedundancySet exists, GroupOperationalStatus[0] is determined by the ‘worst-of’ algorithm for physical memory boards and memory modules.

For details, see “Properties for Memory Collection Status”.


GroupStatusDescriptions[0] contains descriptive text per GroupOperationalStatus[0]:

Memory collection status: OK

Memory collection status: Degraded

Memory collection status: Unknown

HP_MemoryCollection

1-2-18-1 Properties for Memory Collection Status

RedundancyStatus

from

SMX_MemoryRedundancySet

‘worst’

OperationalStatu

s[0],

SMX_MemoryBoard

‘worst’

OperationalStatus[0],

SMX_MemoryModule

GroupOperational

Status[0]

2 (Fully Redundant) - - 2 (OK)

3 (Degraded Redundancy) - - 3 (Degraded)

- 2 (OK) 2 (OK) 2 (OK)

- 2 (OK) 3 (Degraded) 3 (Degraded)


- 2 (OK) 0 (Unknown) 0 (Unknown)

- 3 (Degraded) 2 (OK) 3 (Degraded)

- 3 (Degraded) 3 (Degraded) 3 (Degraded)

- 3 (Degraded) 0 (Unknown) 3 (Degraded)

- 0 (Unknown) 2 (OK) 0 (Unknown)

- 0 (Unknown) 3 (Degraded) 3 (Degraded)

- 0 (Unknown) 0 (Unknown) 0 (Unknown)

1-2-19 SMX_HostedMemoryCollection Class The SMX_HostedMemoryCollection class represents an association between SMX_MemoryCollection and the computer system that contains this collection.



CIM_Dependency




HP_HostedMemoryCollection

SMX_HostedMemoryCollection


Dependent References SMX_MemoryCollection


1-2-20 SMX_MemberOfMemoryCollection Class The SMX_MemberOfMemoryCollection class represents an association between SMX_MemoryCollection and SMX_MemoryModule or SMX_MemoryBoard.




HP_MemberOfMemoryCollection

SMX_MemberOfMemoryCollection

Collection References SMX_MemoryCollection

Member References CIM_PhysicalElement

(either SMX_MemoryModule or SMX_MemoryBoard)

1-2-21 SMX_MemberOfMemoryRedundancySet Class The SMX_MemberOfMemoryRedundancySet class represents an association between SMX_MemoryBoard and SMX_MemoryRedundancySet.




HP_MemberOfMemoryRedundancySet

SMX_MemberOfMemoryRedundancySet

Collection References SMX_MemoryRedundancySet

Member References SMX_MemoryBoard


1-2-22 SMX_HostedMemoryRedundancySet Class The SMX_HostedMemoryRedundancySet class represents an association between SMX_MemoryRedundancySet and the computer system that contains this redundancy set.



CIM_OwningCollectionElement

HP_HostedMemoryRedundancySet

SMX_HostedMemoryRedundancySet

OwningElement References SMX_ComputerSystem

OwnedElement References SMX_MemoryRedundancySet

1-2-23 SMX_SystemMemoryModuleSlot Class Note: This class is currently NOT implemented.

The SMX_SystemMemoryModuleSlot class represents an association between SMX_MemoryModuleSlot and SMX_ComputerSystemChassis. There is an instance of this class for each memory module slot on the chassis system board (whether the slot is occupied or not). Only system board resident memory module slots are instantiated.



CIM_Component

CIM_Container

HP_SystemMemoryModuleSlot

SMX_SystemMemoryModuleSlot


PartComponent References SMX_MemoryModuleSlot


1-2-24 SMX_SystemMemoryBoardSlot Class The SMX_SystemMemoryBoardSlot class represents an association between SMX_MemoryBoardSlot and SMX_ComputerSystemChassis. There is an instance of this class for each memory board slot in the chassis (whether the slot is occupied or not).



CIM_Component

CIM_Container

HP_SystemMemoryBoardSlot

SMX_SystemMemoryBoardSlot


PartComponent References SMX_MemoryBoardSlot

1-2-25 SMX_MemoryModuleOnBoard Class The SMX_MemoryModuleOnBoard is a conditional Class representing an association between a SMX_MemoryModule and the SMX_MemoryBoard that contains it and the association is only initiated if the Memory Module and Memory Board is Present.



CIM_Container

HP_MemoryModuleOnBoard

SMX_MemoryModuleOnBoard

GroupComponent References SMX_MemoryBoard

PartComponent References SMX_MemoryModule


1-3 Provider Indications

Indications Generated by the Provider

Generates WBEM indications described in


the following sections.

Note:

These Indications


only apply to Proliant Server and not supp


orted on x86 Superdome servers.

1-3-1 Common Properties for Provider Indications The following table describes the properties that are common to all of the SMX Memory Provider indications that are implemented for HPE server platforms where available:


CIM_Indication





CIM_AlertIndication




HP_AlertIndication




OSType On ESXi, 39 (VM)


SystemFirmwareVersion Array of firmware versions of the computer system generating the indication








SystemVirtualSerialNumber[]

If Synergy is enabled, this will contain the logical Serial Number for the system.




RackUID Rack Unique Identifier, if one exists



1-3-2 SMX_MemoryIndication: Memory Module Predictive Failure


CIM_Indication


CIM_AlertIndication

Description A memory module has failed or is predicted to fail.

(MemoryModuleCaption) where MemoryModuleCaption is the SMX_MemoryModule.Caption for the failing memory module

AlertingManagedElement WBEM Path of SMX_MemoryModule instance representing the memory module





EventID 1

ProviderName HP Memory

RecommendedActions Check the memory configuration and replace memory as necessary.

HP_AlertIndication

Summary Memory module has failed or is predicted to fail

EventCategory 3 (Memory)


ProbableCauseDescription Memory Module Failed or Predicted to Fail

1-3-3 SMX_MemoryIndication: Memory Board Error Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

A memory board has an error. (MemoryBoardCaption)

Where: MemoryBoardCaption is the SMX_MemoryBoard.Caption for the failing memory board.

AlertingManagedElement WBEM Path of SMX_MemoryBoard instance representing the memory board





EventID 2


RecommendedActions Check the memory configuration and replace the memory board and memory modules as necessary.

HP_AlertIndication

Summary Memory board error



ProbableCauseDescription Memory Board Error

1-3-4 SMX_MemoryIndication: Memory Redundancy Degraded Property Name Property Implementation

CIM_Indication


CIM_AlertIndication

Description

The Advanced Memory Protection (AMP) system is operating with degraded redundancy. The targeted configuration has degraded or is operating with memory modules that have failed or predicted to fail. (TargetConfiguration/CurrentConfiguration)

Where: TargetConfiguration is SMX_MemoryRedundancySet.TargetConfiguration.



AlertingManagedElement WBEM Path of SMX_MemoryRedundancySet instance representing the Memory Redundancy.



EventID 3


RecommendedActions Check the Advanced Memory Protection configuration and replace the memory board and memory modules as necessary.

HP_AlertIndication

Summary Advanced Memory Protection degraded



ProbableCauseDescription Advanced Memory Protection Degraded

1-3-5 SMX_MemoryIndication: Memory Recovered from Degraded Redundancy


CIM_Indication


CIM_AlertIndication

Description The Advanced Memory Protection(AMP) system is operating normally in the targeted configuration. If redundancy was previously degraded, redundancy has been restored.



(TargetConfiguration) Where: TargetConfiguration is SMX_MemoryRedundancySet.TargetConfiguration.

AlertingManagedElement WBEM Path of SMX_MemoryRedundancySet instance representing the Memory Redundancy.



EventID 4



HP_AlertIndication

Summary Advanced Memory Protection redundancy is now fully operational



ProbableCauseDescription Advanced Memory Protection now Fully Operational

1-4 Physical Location Memory Physical Location is a string representing the physical location of a Memory device, such as DIMM, slot, socket, board, or extender. This string should represent the physical location of the device with which an end-user can uniquely locate the device. Most of these strings will be represented in customer documentation, silkscreen labels, or hood tags.


All Systems HPE Integrity

Cellular Servers

HPE BladeServers in C3000 / C7000

Enclosures

HPE x86 Superdome

servers

Socket=<num> Cabinet=<num> Blade=<num> Socket=<num>

MemoryBoard=<memory_extender_slot_num>

Cell=<num> - memory for

Processor Board=<num>

ProcessorBoard=<associated_processor_board>

- - Blade=<num>


- - Enclosure=<n

um>

hpe insight management wbem providers for hp ...h20628.hpe insight management wbem providers for hp...

Documents