home | truth hardware - 245631 2-pt mortise locks · 2011. 11. 23. · nexus two-point mortise...

HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS

NEXUS™ LOCK SYSTEMS

12

The Nexus™Lock System from TruthHardware is the latest in two-point andmulti-point lockset options for slidingpatio doors. Designed to be compati-ble with all industry standard handlesets, the Nexus Locking Systems havea number of standard features that havebeen proven by our customers to setTruth apart from the competition.

NEXUS TWO-POINT SYSTEM

Combining both versatility and easyinstallation, the Nexus System is suit-able for either wood or vinyl doorapplications, and is available in threeunique mounting configurations; FlushMount, Face Mount (16mm or 20mmEuro groove), or Recessed. The Nexus2 Point Lock is available in eitherstainless steel or carbon steel. TheNexus Two-Point Lock System utilizestwo opposing locking points (hooks)that offers an intuitive single point ofhorizontal adjustment for the reach ofthe lock hooks.

NEXUS MULTI-POINT LOCK SYSTEM

The Nexus Multi-Point Lock Systemwhich is offered in stainless steel as astandard has three individuallyadjustable locking points with oppos-ing upper and lower lock points to pre-vent the door from being lifted whichfurther enhances its security. A greateradjustment range at the remote hooksprovides the additional forgivenessneeded on doors which may be out-of-square due to poor installation.

MATERIAL & FINISHES: Standardfeatures for the Nexus family of locksystems includes:

ANTI-SLAM FEATURE: Truth’s“anti-slam” feature prevents potentialdamage to the door or locking systemhooks by not allowing the hooks to beextended unless the door is closedagainst the frame. This feature ensuresthat when the lock is operated it isclose enough to properly engage thekeeper avoiding a “false” sense of lockup.

STANDARD & EXTENDED REACH:The Nexus Locking System has two

options for the lock, standard andextended reach, which each have a hor-izontal adjustment feature built intothem to offer additional forgiveness.

INDUSTRY TESTED: The NexusLock Systems have been built to helpcustomers meet the AAMA andCAWM forced entry requirements.The Nexus Two-Point System canexceed 2,800 lbs. of pulling force andthe Multi-Point System exceeds 3,000lbs.

KEEPERS:

Truth realizes that no two door systemsare exactly alike; therefore we havedesigned multiple keeper options toaccommodate your application. Inaddition, a special “keeper locator”makes the installation of the keepervirtually fool proof.

WARRANTY:

Protected under the terms of the TruthWarranty for Window and DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Termsand Conditions for further details.

ORDERING INFORMATION:

Because of the variety of sliding patiodoor designs on the market, TruthHardware suggests that you contactTruth’s Technical Service Departmentto help you identify the componentsthat will best meet your requirements.To assist us in helping you identify theproduct that you need, please be pre-pared to provide Truth with the typeand style of profile that you are mount-ing your hardware to.

TRUTH TIPS:

1. A Truth Hardware Secondary PatioDoor Lock or Limiter can be added forapplications requiring additional secu-rity.

2. Bumper guards (Truth item number22082.XX), to keep door sash fromcontacting the opposite jamb during itstravel, are highly recommended (seeHandleset Accessories section).

3. If hardware shown cannot be fittedto the door because of door/hardware

interference, contact Truth for otheravailable options.

4. Installation of longer screws intothe keeper rail will increase security.Screws long enough to reach the roughopening frame are recommended.

5. For easy correction of out of squareor racked door installations, the use ofJamb Jack (frame adjusters) are recom-mended. Frame adjustment canimprove both weather seal tightnessand door operation over the life of thedoor.

6. For vinyl applications, mountingscrews should pass through two PVCwalls or one PVC wall and one insertwall. For this reason, it may be neces-sary to use a longer screw than is rec-ommended.

Recessed - Mount

Face - Mount

Multi - Point

NEXUS

TWO-POINT

MORTISE LOCK

12a

FIG. 1 TWO POINT MORTISE, SHORT FACEPLATE APPLICATION

2X R

LOCK APPLICATION

[35.0 mm]1.38

HOLE POSITIONAND DIAMETERDETERMINED BYHANDLE CHOICE

2.56[65.0 mm]

[8.0 mm]Ø.31

[187.3 mm]7.38

[100.1 mm]3.94

[16.3 mm].64

LOCK MOUNTING TAB

LOCKFACEPLATE

[200.0 mm]7.87

CUT-OUT REQUIRED

2X HOLE FOR #6 SCREW

NEXUS

TWO-POINT

MORTISE LOCK

12b

[15.7 mm].62 MAX

STAINLESS STEEL

STEEL

STEEL

STAINLESS STEEL

PART NUMBER

MATERIAL

STANDARD

"A"ADJUSTMENT RANGE

STANDARD

[30.0 mm]1.18

EXTENDED

[35.0 mm]1.38

EXTENDED

13314

13315

13316

13317

[200.0 mm]7.87

[210.0 mm]8.27

2X HOLE FOR #6-32 SCREW

[187.0 mm]7.36

[5.0 mm].20

[6.5 mm].26

NOTES:HOOK ADJUSTMENT RANGE: STANDARD EXTENDED

"A"ADJUSTMENT RANGE

.38 (9.6 mm)

.25 (6.3 mm)

.49 (12.4 mm)

.36 (9.1 mm)

[29.9 mm]1.18

[6.0 mm]2X .24

[2.4 mm].095

[4.0 mm]2X .16

[190.0 mm]7.48

[50.0 mm]1.97

[69.0 mm]2.72

[35.0 mm]1.38

[72.9 mm]2.87

[24.9 mm]3X .98

[8.0 mm]2X R.31

[16.0 mm].63 FACEPLATE

[4.8 mm]2X .19

FIG. 2 TWO POINT MORTISE LOCK, SHORT FACEPLATE

NOTES:

HOOK ADJUSTMENTS RANGE: STANDARD .38 (9.6 mm)

.25 (6.3 mm)

EXTENDED .49 (12.4 mm)

.36 (9.1 mm)

[16.3 mm].64

[25.0 mm].98

HOLE POSITION

AND DIAMETERDETERMINED BYHANDLE CHOICE

LOCK APPLICATION

[228.0 mm]8.98


[206.5 mm]8.13

[35.0 mm]1.38

[100.1 mm]3.94

[65.0 mm]2.56

CUT-OUT REQUIRED

[7.9 mm]Ø.31

FIG. 3 TWO POINT MORTISE LOCK, LONG FACEPLATE APPLICATION (16mm AND 20 mm FACEPLATE)

NEXUS

TWO-POINT

MORTISE LOCK

12c

NEXUS

TWO-POINT

MORTISE LOCK

12d

"B"

NOTES:HOOK ADJUSTMENT RANGE: STANDARD: EXTENDED:

.38(9.6 mm)

.25(6.3 mm)

.49(12.4 mm)

.36(9.1 mm)

STANDARD

STANDARD

STANDARD

STANDARD

EXTENDED

EXTENDED

EXTENDED

EXTENDED

[50 mm]1.97

[49.1 mm]1.93

FACEPLATEWIDTH

FLAT HEAD SCREW(LENGTH AND THREAD TYPE DETERMINEDBY PROFILE)

, (16 mm AND 20 mm FACEPLATE)

ADJUSTMENT RANGE

2X HOLE FOR #10 [228.0 mm]8.98

[244.3 mm]9.62

"A"

[72.9 mm]2.87

[30.0 mm]1.18 [2.4 mm]

.095

[25.0 mm]3X .98

[35.0 mm]1.38

[190.0 mm]7.48

[30.0 mm]1.18

[69.0 mm]2.72

[4.0 mm]2X .16

[6.0 mm]2X .24 [15.7 mm]

.62 MAX

[4.8 mm]2X .19

.79(20 mm)

.63(16 mm)

.63(16 mm)

"A"FACEPLATE

"B"ADJUSTMENT RANGE

.63(16 mm)

.79(20 mm)

.79(20 mm)

.79(20 mm)

STEEL

STEEL

STEEL

STAINLESS STEEL

STAINLESS STEEL

STAINLESS STEEL

13318

13319

13320

13321

13322

13323

13324

13325

PART NUMBER

.63(16 mm)STEEL

STAINLESS STEEL

MATERIAL

FIG. 4 TWO POINT MORTISE LOCK, LONG FACEPLATE (16mm AND 20 mm FACEPLATE)

NOTES:


.25 (6.3 mm)


.36 (9.1 mm)

NEXUS

TWO-POINT

MORTISE LOCK

12e

AND DIAMETERDETERMINED BYHANDLE CHOICE

[20.50 mm].81

[202.5 mm]7.97

[7.9 mm]Ø.31

HOLE POSITION

[46.0 mm]1.81

[65.0 mm]2.56

[100.1 mm]3.94

LOCK POSITION

CUT-OUT REQUIRED

FACEPLATE

, FIG. 5 TWO POINT MORTISE LOCK RECESSED FACEPLATE APPLICATION

12f

NEXUS

TWO-POINT

MORTISE LOCK

"D"

STANDARD

EXTENDED

[48 mm]1.89

[72.9 mm]2.87

STANDARD

EXTENDED


.38(9.6 mm)

.25(6.3 mm)

ACTUATORLOCATION

LOCK DEPTH

FACEPLATEDEPTH

ADJUSTMENT RANGE

.49(12.4 mm)

.36(9.1 mm)

(STEEL)

FLAT HEAD SCREW(LENGTH AND THREADTYPE TO BE DETERMINEDBY PROFILE)

[202.0 mm]7.95

[20.0 mm].79

[4.8 mm]2X .19

"A"

[226.0 mm]8.90

[251.4 mm]9.90

[25.4 mm]1.00


[3.2 mm].13

[30.0 mm]1.18

[50.0 mm]1.97

[69.0 mm]2.72

[6.0 mm]2X .24

[190.0 mm]7.48

[4.0 mm]2X .16

"B"

"C"

[30.0 mm]1.18

[15.7 mm].62 MAX

13326

13328

"A"FACEPLATE DEPTH

"D" ADJUSTMENT RANGE

13303

13410

.28(7.0 mm)

.19(4.7 mm)

"C"LOCK DEPTH

.19(4.7 mm)

"B" ACTUATOR LOCATION

1.56(39.6 mm)

1.65(42.4 mm)

PART NUMBER

1.26(32.0 mm)

1.17(29.7 mm)

1.65(42.4 mm)

1.56(39.6 mm)

.28(7.0 mm)

1.17(29.7 mm)

1.26(32.0 mm)

FIG. 6 TWO POINT MORTISE LOCK, RECESSED FACEPLATE (STEEL)

NOTES:


.25 (6.3 mm)


.36 (9.1 mm)

NEXUS

TWO-POINT

MORTISE LOCK

12g

"A"

[15.7 mm].62 MAX

[226.0 mm]8.90

[251.4 mm]9.90

[25.4 mm]1.00

2X HOLE FOR #10

[.8 mm].03

[2.4 mm].095

[30.0 mm]1.18

[50.0 mm]1.97

[69.0 mm]2.72

[6.0 mm]2X .24

[190.0 mm]7.48

[4.0 mm]2X .16

"B"

"C"

[30.0 mm]1.18

[4.8 mm]2X .19

[18.8 mm].74


.38(9.6 mm)

.25(6.3 mm)

.49(12.4 mm)

.36(9.1 mm)

"D"

STANDARD

EXTENDED

ADJUSTMENTRANGE

STANDARD

EXTENDED

FACEPLATEDEPTH

ACTUATORLOCATION

LOCKDEPTH

[48.0 mm]1.89

[72.9 mm]2.87

[200.7 mm]7.90

(STAINLESS STEEL)

FLAT HEAD SCREW (LENGTH AND THREADTYPE TO BE DETERMINED BY PROFILE)

13409

13411

.19(4.7 mm)

1.26(32.0 mm)

1.17(29.7 mm)

1.65(41.9 mm)

1.56(39.6 mm)

13327

13329 1.65(41.9 mm)

1.56(39.6 mm)

.28(7.0 mm)

.19(4.7 mm)

.28(7.0 mm)

1.26(32.0 mm)

1.17(29.7 mm)

"A"FACEPLATE DEPTH

"B"ACTUATOR LOCATION

"C"LOCK DEPTH

"D"ADJUSTMENT RANGE

PART NUMBER

FIG. 7 TWO POINT MORTISE LOCK, RECESSED FACEPLATE (STAINLESS STEEL)

NOTES:


.25 (6.3 mm)


.36 (9.1 mm)

12h

[158.8 mm]6.25

[79.4 mm]3.12

"B"

"A"

[177.8 mm]7.00

[3.6 mm]3X .14

[88.9 mm]3.50

[40.0 mm]1.58

[80.0 mm]3.15

.64(16.3 mm)

.64(16.3 mm)

.73(18.5 mm)

.68(17.3 mm)

.73(18.5 mm)

.68(17.3 mm)

3X HOLE FOR #10FLAT HEAD SCREW(LENGTH AND THREADTO BE DETERMINEDBY PROFILE)

LINES INDICATECENTER OF KEEPER

.09(2.3 mm) .50(12.7 mm)33182

33183

STEEL

MATERIAL MATERIALTHICKNESS

"A"DIMENSION

"B"DIMENSION

PART NUMBER

STAINLESS STEEL .08(2.0 mm) .50(12.7 mm)

33184

33185

STEEL

STAINLESS STEEL

1.00(25.4 mm)

33291

33292

STEEL

STAINLESS STEEL

.75(19.0 mm)

.09(2.3 mm)

.08(2.0 mm)

.09(2.3 mm)

.08(2.0 mm)

1.00(25.4 mm)

.75(19.0 mm)

FIG. 8 KEEPER, TWO POINT MORTISE LOCK

NEXUS

TWO-POINT

MORTISE LOCK

NEXUS

TWO-POINT

MORTISE LOCK

12i

PART NUMBER

[14.5 mm].57

4X HOLE FOR #10PAN HEAD SCREW(LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE)

33194

33355

"A"KEEPER HEIGHT

.60(15.2 mm)

.50(12.7 mm)

"A"

[11.1 mm].44

[38.1 mm]1.50

[3.2 mm]2X .12

[15.9 mm].62

[14 mm].56

[2.5 mm].10

RECESSED LINES INDICATE CENTER OF KEEPER

[176.1 mm]6.93

[247.6 mm]9.75

[40.6 mm]2X 1.60

[8.3 mm].33

FIG. 9 KEEPER, TWO POINT MORTISE LOCK

NEXUS

TWO-POINT

MORTISE LOCK

12j

MATERIAL

33186 STEEL .126(3.2 mm)

33187 STAINLESS STEEL .118(3.0 mm)

"A"THICKNESS

"A"

[165.1 mm]6.50

[69.8 mm]2.75

[12.7 mm].50

[19.0 mm].75

[42.5 mm]1.68

THICKNESS

[139.7 mm]5.50

[4.8 mm].19

3X HOLE FOR #10FLAT HEAD SCREW(LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE)

RECESSED LINESINDICATE CENTER OF KEEPER

PART NUMBER

[15.7 mm].62

[77.8 mm]3.06

[38.1 mm]1.50

FIG.11 33276 KEEPER LOCATOR, TWO POINT MORTISE LOCK

FIG.10 KEEPER, TWO POINT MORTISE LOCK PLATE

FIG. 10 KEEPER, TWO POINT MORTISE LOCK PLATE

FIG. 11 33276 KEEPER LOCATOR, TWO POINT MORTISE LOCK PLATE

NEXUS

THREE-POINT

MORTISE LOCK

12k

[35.8 mm]3X 1.41

HOLE POSITIONAND DIAMETERDETERMINED BY HANDLECHOICE

[152.4 mm]6.00

[246.6 mm]9.71

[380.8 mm]14.99

[123.3 mm]4.85

6X FULL R

[163.0 mm]6.42

[375.5 mm]14.78

[375.5 mm]14.78

[152.4 mm]6.00

[26.5 mm]1.04

[16.3 mm]3X .64

[380.8 mm]14.99

[130.0 mm]5.12

[130.0 mm]5.12

[163.0 mm]6.42

HARDWARE APPLICATION CUT OUT REQUIRED

FIG. 12 THREE POINT MORTISE LOCK, FACE MOUNT APPLICATION

NEXUS

THREE-POINT

MORTISE LOCK

12l

"B"ADJUSTMENT RANGE SEE FIG. 14

* - DIMENSION FROMUNDERSIDE OF FACE PLATE

"A"ADJUSTMENT RANGE SEE FIG. 14

.18-.31(4.6-7.8mm)

.18-.35 (4.6-8.8mm) .30-.46 (7.6-11.8mm)

.28-.41 (7.1-10.3mm)

CASE

FACEPLATE

[35.0 mm]*3X 1.38

[230.0 mm]9.06

FOR DIMENSIONSIN THIS AREASEE FIGURE 14

[275.0 mm]2X 10.83

[130.0 mm]5.12

PART NUMBER

13340

13341

FLAT HEAD SCREW(LENGTH AND THREADTYPE TO BE DETERMINEBY PROFILE)

HOOK LENGTH

STANDARD

EXTENDED

[1113.0]43.82

6X HOLE FOR #8[163.0 mm]

6.42

[245.5 mm]9.67

[260.0 mm]10.24

[245.5 mm]9.67

[163.0 mm]6.42

[18.0 mm].71 [5.1 mm]

2X .20

[4.5 mm].18

[5.0 mm].20

[473.7 mm]18.65

[473.7 mm]18.65

[134.0 mm]2X 5.28

G.13 THREE POINT MORISE LOCK, FACE MOUNT STANDARD BACKSET

[15.7 mm].62 MAX.

[16.0 mm].63

FIG. 13 THREE POINT MORTISE LOCK, FACE MOUNT STANDARD BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12m

* DIMENSION FROM UNDERSIDE OF FACEPLATE

REMOTE HOOK

"A"ADJUSTMENTRANGE

2X "B"ADJUSTMENTRANGE

[26.5 mm]* 1.04

[19.0 mm].75

[19.0 mm].75

[50.0 mm]1.97

[100.0 mm]3.94

[100.0 mm]3.94

[100.0 mm]3.94

[6.0 mm]6X .24

[3.0 mm]6X .12

[43.2 mm]1.70

[31.5 mm]1.24

FIG. 14 THREE POINT MORTISE LOCK, FACE MOUNT DETAIL, STANDARD BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12n

[152.4 mm]6.00

[152.4 mm]6.00

[123.3 mm]4.85

6X FULL R

[380.8 mm]14.99

[380.8 mm]14.99

[28.8 mm]1.13

[38.1 mm]3X 1.50

[246.6 mm]9.71

[263.0 mm]10.35

[165.0 mm]6.50

[165.0 mm]6.50

[263.0 mm]10.35

[318.5 mm]12.54

[318.5 mm]12.54

HOLE POSITIONAND DIAMETERDETERMINEDBY HANDLECHOICE

[11.7 mm].46

[16.3 mm].64

[12.2 mm].48

[6.1 mm].24

[8.1 mm].32

[2.3 mm]2X .09

[9.4 mm].37

16 MM EURO-GROOVE DETAIL

[16.3 mm].64

CUT OUT REQUIRED

HARDWARE

APPLICATION

FIG. 15 THREE POINT MORTISE LOCK, 16mm EURO-GROOVE APPLICATION STANDARD BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12o

[10.1 mm].40


[20.3 mm].80

[2.3 mm]2X .090

[12.2 mm].48

[9.4 mm].37

[6.10 mm].24


[152.4 mm]6.00

[152.4 mm]6.00

[123.3 mm]4.85

6X FULL R

[380.8 mm]14.99

[380.8 mm]14.99

[38.1 mm]3X 1.50

[263.0 mm]10.35

[165.0 mm]6.50

[165.0 mm]6.50

[263.0 mm]10.35

[318.5 mm]12.54

[318.5 mm]12.54

[11.7 mm].46

[20.3 mm].80

[28.8 mm]1.13

[246.6 mm]9.71

HARDWARE

APPLICATIONCUT OUT REQUIRED

STANDARD BACKSET

[16.3 mm]3X .64

FIG. 16 THREE POINT MORTISE LOCK, 20mm EURO-GROOVE APPLICATION STANDARD BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12p

[35.0 mm]*3X 1.38

[10.0 mm].39

FOR DIMENSIONS IN THIS AREASEE FIGURE 18

[134.0 mm]2X 5.28

[473.7 mm]18.65

[230.0 mm]9.06

"C"

[165.0 mm]6.50


FACE PLATEWIDTH

[15.7 mm].62 MAX.

CASE

[263.0 mm]10.35

[153.5 mm]6.04

[330.0 mm]12.99

[153.5 mm]6.04

[263.0 mm]10.35

[1183.0]46.57

[4.5 mm].18

[5.1 mm]2X .20

[275.0 mm]2X 10.83

[473.7 mm]18.65

#8 FLAT HEAD SCREW(LENGTH AND THREADTYPE TO BE DETERMINEBY PROFILE)

HOOK LENGTH

6X HOLE FOR

[2.5 mm].10

STANDARD

EXTENDED

STANDARD

EXTENDED

.63(16 mm)

.79(20 mm)

.79(20 mm)

.15-.28(3.9-7.1 mm)

.27-.40(6.9-10.1 mm)

.27-.40(6.9-10.1 mm)

.15-.32(3.9-8.1 mm)

.27-.44(6.9-11.1 mm)

13151

13152

.15-.28(3.9-7.1 mm) .15-.32(3.9-8.1 mm).27-.44(6.9-11.1 mm)

"C"FACE PLATE

"A"ADJUSTMENT RANGE

SEE FIG. 18

"B"ADJUSTMENT RANGE

SEE FIG. 18

13149

13150

.63(16 mm)

PART NUMBER

FIG. 17 THREE POINT MORTISE LOCK EURO-GROOVE STANDARD BACKSET (16mm and 20mm)

NEXUS

THREE-POINT

MORTISE LOCK

12q


REMOTE HOOK

"A"ADJUSTMENTRANGE


[26.5 mm]* 1.04

[19.0 mm].75

[19.0 mm].75

[50.0 mm]1.97

[100.0 mm]3.94

[100.0 mm]3.94

[100.0 mm]3.94

[6.0 mm]6X .24

[3.0 mm]6X .12

[43.2 mm]1.70

[29.0 mm]1.14

FIG. 18 THREE POINT MORTISE LOCK, EURO-GROOVE DETAIL, STANDARD BACKSET

12r

NEXUS

THREE-POINT

MORTISE LOCK

[35.8 mm]2X 1.41

[152.4 mm]6.00

[246.6 mm]9.71

[380.8 mm]14.99

[123.3 mm]4.85

6X FULL R

[163.0 mm]6.42

[375.5 mm]14.78

[375.5 mm]14.78

[152.4 mm]6.00

[16.3 mm]3X .64

[380.8 mm]14.99

[36.5 mm]1.44


[45.7 mm]1.80

[130.0 mm]5.12

[130.0 mm]5.12

[163.0 mm]6.42

LOCK APPLICATIONCUT OUT REQUIRED

FIG. 19 THREE POINT MORTISE LOCK, FACE MOUNT APPLICATION DEEP BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12s

"B"ADJUSTMENT RANGE

SEE FIG. 21

"A"ADJUSTMENT RANGE

SEE FIG. 21

.18-.31(4.6-7.8mm)

.18-.35 (4.6-8.8mm) .30-.46 (7.6-11.8mm)

.28-.41 (7.1-10.3mm)

[230.0 mm]9.06

FOR DIMENSIONSIN THIS AREASEE FIGURE 21

[275.0 mm]2X 10.83

[130.0 mm]5.12

FACEPLATE

CASE

[35.0 mm]*3X 1.38

PART NUMBER

13781

13782

FLAT HEAD SCREW(LENGTH AND THREADTYPE TO BE DETERMINEBY PROFILE)

HOOK LENGTH

STANDARD

EXTENDED

[1113.0]43.82

6X HOLE FOR #8

[163.0 mm]6.42

[245.5 mm]9.67

[260.0 mm]10.24

[245.5 mm]9.67

[163.0 mm]6.42

[18.0 mm].71

[5.1 mm]2X .20

[4.5 mm].18

[5.0 mm].20

[473.7 mm]18.65

[473.7 mm]18.65

[134.0 mm]2X 5.28

[15.7 mm].62 MAX

[16.0 mm].63

FIG. 20 THREE POINT MORTISE LOCK, FACE MOUNT, DEEP BACKSET

12t

NEXUS

THREE-POINT

MORTISE LOCK

[19.0 mm].75

[19.0 mm].75

[43.2 mm]1.70

[50.0 mm]1.97

[6.0 mm]6X .24

[100.0 mm]3.94

[36.5 mm]* 1.44

[45.0 mm]* 1.77

[3.0 mm]6X .12

* DIMENSION FROM UNDERSIDE OF FACEPLATE

[100.0 mm]3.94

[100.0 mm]3.94

[41.5 mm]1.63

"A"ADJUSTMENTRANGE

"B"ADJUSTMENT RANGE

REMOTE HOOK

FIG. 21 THREE POINT MORTISE LOCK, FACE MOUNT DETAIL, DEEP BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12u [48.1 mm]1.89

[16.3 mm].64

[12.2 mm].48

[6.10 mm].24

[8.2 mm].32

[2.3 mm]2X .09

[9.4 mm].37


CUT OUT REQUIRED

HARDWARE

APPLICATION

[152.4 mm]6.00

[152.4 mm]6.00

[123.3 mm]4.85

6X FULL R

[380.8 mm]14.99

[380.8 mm]14.99

[38.1 mm]2X 1.50

[263.0 mm]10.35

[165.0 mm]6.50

[165.0 mm]6.50

[263.0 mm]10.35

[318.5 mm]12.54

[318.5 mm]12.54

[11.7 mm].46

[16.3 mm].64

[38.8 mm]1.53

[246.6 mm]9.71


FIG. 22 THREE POINT MORTISE LOCK, 16mm EURO-GROOVE APPLICATION, DEEP BACKSET

12v

NEXUS

THREE-POINT

MORTISE LOCK

[152.4 mm]6.00

[152.4 mm]6.00

[123.3 mm]4.85

6X FULL R

[380.8 mm]14.99

[380.8 mm]14.99

[263.0 mm]10.35

[165.0 mm]6.50

[165.0 mm]6.50

[263.0 mm]10.35

[318.5 mm]12.54

[318.5 mm]12.54

[38.8 mm]1.53

[11.7 mm].46

[38.1 mm]2X 1.50[20.3 mm]

.80

[10.1 mm].40


[20.3 mm].80

[2.3 mm].090

[12.2 mm].48

[9.4 mm].37

[6.10 mm].24

[48.1 mm]1.89

HOLE POSTIONAND DIAMETERDETERMINED BY HANDLE CHOICE

HARDWARE

APPLICATIONCUT OUT REQUIRED

[16.3 mm]3X .64

[246.6 mm]9.71

FIG. 23 THREE POINT MORTISE LOCK, 20mm EURO-GROOVE APPLICATION DEEP BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12w

.63(16 mm)

.79(20 mm)

.79(20 mm)

.15-.28(3.9-7.1 mm)

.27-.40(6.9-10.1 mm)

.27-.40(6.9-10.1 mm)

.15-.32(3.9-8.1 mm)

.27-.44(6.9-11.1 mm)

13779

13780

.15-.28(3.9-7.1 mm) .15-.32(3.9-8.1 mm).27-.44(6.9-11.1 mm)

"C"FACE PLATE

"A"ADJUSTMENT RANGE

SEE FIG. 25

"B"ADJUSTMENT RANGE

SEE FIG. 25

13777

13778

.63(16 mm)

PART NUMBER

[10.0 mm].39

[230.0 mm]9.06

[134.0 mm]2X 5.28

[473.7 mm]18.65

[15.7 mm].62 MAX

"C"

* - DIMENSION FROMUNDERSIDE OF FACEPLATE

FOR DIMENSIONS IN THIS AREA SEE FIGURE 25

FACEPLATEWIDTH

CASE

[263.0 mm]10.35

[153.5 mm]6.04

[330.0 mm]12.99

[153.5 mm]6.04

[263.0 mm]10.35

[1183.0]46.57 [4.5 mm]

.18

[5.0 mm]2X .20

[275.0 mm]2X 10.83

[473.7 mm]18.65

#8 FLAT HEAD SCREW(LENGTH AND THREADTYPE TO BE DETERMINEBY PROFILE)

[35.0 mm]*3X 1.38

HOOK LENGTH

6X HOLE FOR

[2.5 mm].10

STANDARD

EXTENDED

STANDARD

EXTENDED

[165.0 mm]6.50

FIG. 24 THREE POINT MORTISE LOCK, EURO-GROOVE - DEEP BACKSET (16mm AND 20mm)

12x

NEXUS

THREE-POINT

MORTISE LOCK

[19.0 mm].75

[19.0 mm].75

[43.2 mm]1.70

[50.0 mm]1.97

[6.0 mm]6X .24

[100.0 mm]3.94

[36.5 mm]* 1.44

[45.0 mm]* 1.77

[3.0 mm]6X .12


"A"ADJUSTMENT RANGE

[100.0 mm]3.94

[100.0 mm]3.94

[39.0 mm]1.54

*DIMENSION FROM UNDERSIDEOF FACE PLATE

REMOTE HOOK

FIG. 25 THREE POINT MORTISE LOCK, EURO GROOVE DETAIL DEEP BACKSET

NEXUS

THREE-POINT

MORTISE LOCK

12y

HOOK SLOT HOOK SLOT

DETAIL OF HOOK DIRECTION

LINES INDICATECENTER OF KEEPER

[38.1 mm]1.50

6X HOLE FOR #10PAN HEAD SCREW

[3.2 mm].12

[11.2 mm].44 [18.4 mm]

.72

[15.9 mm].62

[2.5 mm].10

[25.4 mm]1.00

[431.8 mm]17.00

[520.7 mm]20.50

HO

OK

[38.1 mm]1.50

[1003.3]39.50

FIG. 26 THREE POINT MORTISE LOCK, 33338 KEEPER

12z

NEXUS

THREE-POINT

MORTISE LOCK

4 DETAIL OF HOOK DIRECTION

33337 KEEPE

FIG. 28 THREE POINT MORTISE LOCK 33277 KEEPER LOCATOR

[462.8 mm]18.22

[493.7 mm]19.44

[69.8 mm]2.75

[69.8 mm]2.75

[69.8 mm]2.75

[925.5 mm]36.44

[431.8 mm]17.00

6X HOLE FOR #10FLAT HEAD SCREW(LENGTH AND THREAD TYPE TO BE DETERMINEBY PROFILE)

[76.2 mm]3.00 H

OO

K

[1 m 71.6 mm]42.19

[38.1 mm]1.50

[19.0 mm].75

[520.7 mm]20.50

[2.5 mm].10

[15.7 mm].620

[38.3 mm]1.51

[38.1 mm]1.50

FIG. 27 THREE POINT MORTISE LOCK, 33337 KEEPER

12aa 700 west bridge street, owatonna, mn 55060 n 507.451.5620 800.866.7884 n TRUTH.COM

NEXUS

THREE-POINT

MORTISE LOCK

home | truth hardware - 245631 2-pt mortise locks · 2011. 11. 23. · nexus two-point mortise...

Documents