high-profile: june 2016
DESCRIPTION
ÂTRANSCRIPT
www.high-profile.com
June 2016 1
E.S. Boulos Completes First Phase Eastern ME Med. Ctr. Modernization Refreshing Improvements: UMass Memorial Medical CenterDAI and MBI Address Health CrisisAmenta Emma Honored with IIDA NE Award for RMACTMaugel Completes Fit-Out for ComcastMarty Barnes On 20 Years of Building Success Kronos Executes Lease at CrossPointShawmut Hosts Safety Event for Industry Leaders Shipwreck Discovery at 121 Seaport Project Site
Inside this Issue:
INDUSTRY EXPERT ARTICLES
Jason Costello 13
Sharon Apotheker Pomeroy
15
Teresa Wilson16
Nathan Turner13
Tony Cavallaro9
Rebecca Dillon18
Kristen Murphy21
Rendering of Stamford Hospital’s new Patient-Centered Facility / page 32 / rendering provided by WHR Architects
Plus: Up-Front, Education, Connecticut, Municipal, Northern New England, Philanthropy, Corporate, Landscape, Multi-Residential, Restoration & Renovation, Senior Living, Preservation, National/International, Awards, People, Calendar, and more...
June 2016NEW ENGLAND FACIL IT IES DEVELOPMENT NEWS
Focus: Healthcare Facilities
Stamford Hospital & Skanska USA Collaborate on New Patient-Centered Facility
P.O
. Box
7, P
embr
oke,
MA
0235
9C
hang
e S
ervi
ce R
eque
sted
Jon Ciffolillo44
www.high-profile.com
June 20162
Fire Protection • Biotech • Pharmaceutical • Educational • Sports & Entertainment • Medical
See more at amerplumb.com
1000 Cordwainer Drive, Norwell, MA 02061781.347.9200 | 781.347.9250 fax
www.amerplumb.com
Proud member of the U.S. Green Building Council
Mechanical Contractors Registration No. 8028
HEALTHCARE
www.high-profile.com
June 2016 3
NG-RF-1102 // “Higher Performing” // High Profile Magazine // Full page // Trim Area: 10.75” x 13.875” Bleed: .125in // 4C // 225 dpi
FOR ELIGIBLE PROJECTS within National Grid’s electric and/or gas service territories in Massachusetts and Rhode Island. National Grid does not guarantee savings. Savings and energy efficiency experiences may vary. Terms and conditions apply. In Rhode Island: These programs are funded by the energy efficiency charge on all customers’ utility bills, in accordance with Rhode Island law.
©2016 National Grid USA Service Company, Inc.
We can help you provide more value to your clients with higher
performing equipment.
That’s business on the grid.
Take advantage of our knowledge and incentives to lower total cost of ownership for your clients. Visit ngrid.com/retrofit, or call 844-280-4325.
www.high-profile.com
June 20164
Cover Story:
ADVERTISERS INDEX
Abbot Boyle… ...................................... 23Alpha Weatherproofing… ..................... 10Amenta Emma… ...................................18American Plumbing & Heating … ......... 2American Window FIlm… ....................14APC Services of New England… ......... 10Associated Subcontractors of Massachusetts ....................................... 33Atlantic Prefab ........................................ 4B.L. Companies ...................................... 8Barnes Building .................................... 39Boston Plasterers ..................................... 9Bowdoin Construction .......................... 23BSAspace… .......................................... 54Caldwell & Walsh Building Construction… ...................................... 15Caprioli Painting… ............................... 48Copley Wolff Design Group… ............. 44Cube 3 ................................................... 46DAI/MBI ............................................... 22Dietz & Co. ............................................. 8Donnegan ..............................................14E.M. Duggan ......................................... 42Existing Conditions............................... 45Feldman Land Surveyors… .................. 26Genest… ............................................... 55Genest Easy Architecture… ................... 5Girder Slab… ........................................ 56Great In Counters… .............................. 32Hampshire Fire Protection … ............... 36Hutter Construction…............................. 7Ideal Concrete Block Company… .........18Integrated Builders… ............................ 25J&M Brown… ......................................... 8J. Calnan Associates….......................... 40J.M. Electrical… ................................... 35Jewett Construction… ........................... 20KBE…................................................... 28LAB Architects… ..................................17
Landtech… .............................................16Margulies Perruzzi Architects… ...........17Marr Scaffolding… ............................... 24Maugel Architects… ............................... 6McNamara Salvia….............................. 22Meridian & Associates… ..................... 37Methuen/Summit … ............................. 46Metro Walls… ........................................16myCADD… .......................................... 25National Grid… ...................................... 3NECA… ................................................ 27NEMCA… ............................................ 54New England Regional Counsil of Carpenters… ..........................................41Norgate Metal… ..................................... 6Oasis Shower Door… ............................ 53O’Sullivan Architects ............................. 7PCINE… ............................................... 12QSR Steel… ...........................................11RBG… .................................................. 13RKB Architects…................................. 52RPF Environmental… .......................... 20Shawmut… ............................................ 42Shechtman Halperin Savage… ............. 52SL Chasse… .......................................... 19SLAM… ................................................31South Coast Improvement Company… 44Suffolk Construction Company… ........ 26The Associated Construction Corporation… ........................................31Topaz… ..................................................51United Steel… ....................................... 30Valley Crest… ....................................... 43Wayne J. Griffin .....................................21
Featuring:
Publisher’s Message... ................... 6Up-Front... ................................... 7Healthcare... ................................ 9Education... ............................... 24Connecticut................................ 30Municipal... ............................... 33Northern New England... ............ 34Philanthropy... ............................ 36Corporate... ............................... 37Safety Week... ........................... 42
Mixed-Use... .............................. 43Landscape... .............................. 44Restoration & Renovation... .......... 45Multi-Residential... ...................... 46Senior Living.... .......................... 48Preservation... ............................ 49National/International... ............. 50Awards... .................................. 51People....................................... 53Calendar... ................................ 54
Sections:
Stamford Hospital & Skanska USA Collaborate on New Patient-Centered Facility page 32
Amenta Emma Honored with IIDA NE Award for RMACT.........................page 30
Publishers: Michael Barnes and Kathy BarnesEditors: Ralph and Marion Barnes Business Development Manager: Anastasia BarnesAccount Executives: Amy Davenport, Thomas D’Intinosanto Art Director: Yvonne Lauzière, Stark CreativeProofing Editor: Peggy Dostie
Email news releases, advertising queries, articles, calendar listings, and announcements, to: [email protected].
P.O. Box 7, Pembroke, MA 02359Express Delivery: 615 School St., Pembroke, MA 02359Phone: (781) 294-4530 | Fax: (781) 293-5821 | EMail: [email protected]
Marty Barnes on 20 Years of Success...........................................................page 38
Rendering of Stamford Hospital’s new Patient-Centered Facility / courtesy of WHR Architects
Reception/waiting room designed to create a welcoming and relaxing environment
131 Burke Street • Nashua, NH 03060 • Ph: (603) 824-9690www.AtlanticPrefab.com
Constructing Solutions. Delivering Success.
Let Atlantic Prefab save you valuable construction time and money with prefabricated construction components designed to meet
your needs. Atlantic Prefab offers quality value added solutions for Metal Roof Trusses, Pre-Finished Exterior Wall Panels, Exterior Envelope Panels, including Load Bearing Structural Systems.
Contact us to learn how prefabricated solutions can dramatically reduce your construction schedule and “time to dry-in”.
Pre-Engineered Metal Trusses Exterior Envelope Wall PanelsPre-Finished Exterior Wall Panels Load Bearing Wall Panels
Custom Prefab Components
New England’s Only Metal Truss Fabricator!
Tim Allison, VP of project management; Lynne Barnes, controller; Marty Barnes, president; Tony Barnes, GM steel fabrication division; and Anthony Poliatti, project manager
www.high-profile.com
June 2016 5
The Look of CLay BriCk at a fraCTion of The CosT!
For more information contact our Architectural Sales Department 1-800-649-4773 ext. 155 • www.GenestArchitecture.com • [email protected]
architectural Concrete Bricks
Both available in a Wide Variety of Colors & architectural finishes
Available in Standard Half-High Block
3 5/8 " x 3 5/8 " x 15 5/8 " 5 5/8 " x 3 5/8 " x 15 5/8 " 11 5/8 " x 3 5/8 " x 15 5/8 "7 5/8 " x 3 5/8 " x 15 5/8 "
*Also available in bond beams
* *
• Structural Load-Bearing or Veneer Units• Color Throughout• Integral Water Repellent• Wide Variety of color, texture & sizes• Meets all Applicable ASTM Standards• Long Term Durability
Genest Easy Brick®
InSULATED BRIckS AVAILABLE To EASILy MEET EnERGy coDES!
R = 1 " Single Bullnose
7 5/8 "2 1/4 "
3 5/8"7 5/8 "
3 5/8"2 1/4 "
7 5/8 "1 7/8"
5 1/4"3 5/8"2 1/4"
50º
R = 1 " Double Bullnose
7 5/8"
2 1/4"
Stretcher 45º / Corner
Concrete face Brick
• installs faster then Clay Brick• Both Faces can Be Used to Minimize Waste• consistent Sizes • Long Term Durability
www.high-profile.com
June 20166
Publisher’s Message
Michael Barnes
AMENITY-RICH WORKPLACES DRAMATIC INTERIORS
INTERIOR REFRESHES COMMERCIAL REPOSITIONING COLLABORATIVE WORKSPACES
WWW.MAUGEL.COM
19 Presidential Way
SomosComcast
DRAMATIC INTERIORS INNOVATIVE WORKPLACE DESIGN CORPORATE REBRANDINGCOMMERCIAL REPOSITIONING COLLABORATIVE WORKSPACES
LOOKING FOR PEACE OF MIND?LET NORGATE TAKE CARE OF IT!
ST
RU
CT
UR
AL
ST
EE
L F
AB
RIC
AT
OR
791, 8e Rue, La Guadeloupe QC GOM 1G0, Canada | T : 418 459-6988 | F : 418 459-3493
Visit us at www.norgatemetal.com for more information.
SALES TEAM
DETAILING/ENGINEERING TEAM
PROJECT MANAGEMENT TEAM
FABRICATION TEAM
ERECTION TEAMS
VERY KNOWLEDGEABLE
CBT is the architect interior designer for the project.UDR is developing the property
WELL panelists included (l-r) Ben Myers, sustainability manager at Boston Properties; Zoe Reich Margarites, vice president of Delos Solutions, which pioneered the WELL certification program;
William Plunkett, senior associate in advisory & transaction services at CBRE, which implemented the first WELL certified commercial office in its global headquarters and Steve Kooy, global
sustainability manager at Haworth
Robert McCullough speaking at ceremonial ground breaking event / Photo: Gil Propp,
courtesy BLDUP
BLDUP.com
HP visited a BLDUP mixer. We met Noah Coughlin founder & CEO; Gil Propp, managing director; and Matt Diroberto, the sales and marketing director, and mingled with guests of the young start-up company.
BLDUP is a fast, easy, simple, free way to get “big data” on commercial real estate development. BLDUP provides meaningful information and data on com-mercial projects and allows professionals to post unique content that is publicly visible. With BLDUP, owners can create a building digitally before it’s completed - to drive traffic to the property and serve as an inbound marketing tool. For public contractors BLDUP allows for statistics to be gathered that is used in municipal reporting that can effect new bids and work awards.
345 Harrison Street
HP attended the recent ground break-ing of 345 Harrison St., a mixed-use development project that will consist of two new buildings totaling approximately 570,000sf. Approximately 585 rental residential apartments will be built along with approximately 33,500sf of ground-floor retail. A one-story underground parking garage containing approximately 252 spaces will be built along William Mullins Way.
continued to page 7
continued to page 7
Well, Well, Well
“Should we become WELL certified?” High-Profile attended an informative panel discussion on the WELL Build-ing Standard hosted by the IFMA Boston Sustainability Committee in partnership with BOMA, USGBC and the BSA. The panel answered questions on the pros and cons of WELL. The new WELL Building Standard, which is meant to fill gaps in the current LEED certifications, has seen rapid acceptance in the industry both here and abroad. Where LEED addresses the design, construction, materials and practices that make a building sustain-able, WELL takes a holistic approach to healthy indoor environmental de-sign, and the impact to human wellness in the built environment.
www.high-profile.com
June 2016 7
Up-Front 603-878-2300
www.HutterConstruction.com Hutter Construction Corporation • P.O. Box 257 • New Ipswich, NH 03071
(603) 878-2300
Design/Bui ldDevelopment
Construct ion ManagementConstruct ion Services
42Call today andas or ars ra e
York HospitalStrater Wing AdditionYork, ME
Fusion to Design Tech Development
Andover, MA – Fusion Design Consultants Inc. of Boston was selected recently by Novaya Real Estate Ventures, a Boston-
Tech Drive in Andover, Mass. / © Fusion Design Consultants Inc.
based private real estate investment firm, to design multiple buildings on Tech Drive in Andover.
CBT is the architect interior designer for the project.UDR is developing the property
CBT architects were among others to let the shovels fly / photo: Gil Propp courtesy BLDUP
CBT is the architect interior designer for 345 Harrison St. UDR is developing the property / rendering by CBT Architects
345 Harrison is located in the South End New York Streets neighborhood, an area of Boston’s South End that is under-going significant development.
Additional recently-completed projects nearby include Sepia at Ink Block and Troy Boston. Also under construction nearby are The Lucas and Siena at Ink Block.
Bob McCullough, UDR’s Vice President of Development, said, “We are thrilled to be part of the ongoing transformation of The New York Streets into a thriving, innovative 18-hour neighborhood. We look forward to
THE DEVELOPMENT TEAMDEVELOPER: UDR
ARCHITECT: CBT ArchitectsENGINEERS:
Haley & Aldrich, Howard/Stein-Hudson Associates, and VHB
continuing to work with the community to bring housing, new restaurants, and pedestrian activity to this previously underutilized block. The development of this exciting project will make the South End an even more vibrant place to live.”
Publisher’s Messagecontinued from page 6
www.high-profile.com
June 20168 High-Profile: Up-Front
BL Companies, Inc.800.301.3077 | www.blcompanies.comMeriden, CT | Hartford, CT | Bridgeport, CT | Norwood, MA
DELIVERING VALUE TO CLIENTS IN THE BUILT ENVIRONMENT.
For nearly 30 years, BL Companies has been an award-winning leader in delivering high-quality, integrated architecture, engineering, environmental, land surveying, planning and consulting services for land development, building design and infrastructure projects.
Employee owned. Client driven.
&17 Hampden StreetSpringfield, MA 01103(413) 733-6798www.dietzarch.com
DIETZ & COMPANY ARCHITECTS DESIGN THAT LOOKS GOOD, DOES GOOD
West�eld Senior Center - West�eld, MA© Woodruff/Brown Photography
Ursuline Holds GroundbreakingDedham, MA – Groundbreaking ceremo-nies were held May 16 for a new 40,000sf Athletic and Convocation Center on the Dedham campus of Ursuline Academy, an independent Catholic school for girls in grades 7-12.
Designed by ARC/Architectural Resources Cambridge, the new two-story center will be built on the highest point of the campus, overlooking the school buildings and athletic fields. C.E. Floyd Company is the construction manager.
The new multipurpose building provides much-needed community, academic, and athletic space for students and faculty. Three new classrooms will accommodate a growing student population, and a flexible innovation space will allow for hands-on learning experiences including an expanded Science, Technology, Engineering and
Mathematics (STEM) curriculum.Athletic, health, and wellness facilities
will include a fitness and strength training room, a large gymnasium for basketball, volleyball as well as a suspended jogging track and locker rooms. A large community and meeting space will offer multiple options for alumnae, parents, students, and community gatherings.
Rendering of Ursuline Academy Athletic Center / Architectural Resources Cambridge
Cannistraro Elected NSA PresidentSan Antonio TX – At its Annual Spring Conference in April in San Antonio, The National Subcontractors Alliance (NSA) named David Cannistraro of JC Cannistraro LLC as president.
The NSA represents over 4,000 subcontractors and allied
partners nationwide.Cannistraro is the past
president of the Associated Subcontractors of MA (ASM) and the newly elected treasurer and member of the board of directors for New England MCA.
Trinity Breaks Ground on Boston East
Boston – Governor Charlie Baker and Boston Mayor Martin J. Walsh joined developer Trinity Financial and commu-nity and neighborhood leaders recently to celebrate the official groundbreaking of Boston East.
Located directly on the waterfront, Boston East is a $71 million boutique mid-rise residential community that features 174 market-rate and 26 affordable units, including six artist live-work units. Boston East will also actively engage the waterfront through the development and expansion of the Boston Harborwalk made possible in part through a $3 million MassWorks Infrastructure Program grant to East Boston.
The new community, which is designed by ICON Architecture, features an acre of open space that includes a number of community outdoor spaces – including
multiple decks and a large rooftop lounge. A harbor walk trail will extend around and past the development, and residents will also have access to onsite paddle boarding and a kayak launch.
The development was financed through a $45.7 million construction loan from J.P. Morgan and will feature studio, one-, two-, and three-bedroom units, along with loft units. In addition, Boston East will feature a public art gallery that will showcase work from area artists.
The site also includes a portion of land that is a Designated Port Area and will be developed by the East Boston Community Development Corporation with a marine-related use.
The interior will feature designs by husband and wife duo Robert and Cortney Novogratz.
Boston East – water shot
267 Amory Street, Jamaica Plain, MA Tel: 617.522.6800 [email protected] www.jmbco.com
Excellence in Electrical Construction…For More Than 90 Years
Longwood CenterDana-Farber Cancer InstituteBoston, Massachusetts
Connecting Greater Boston to a Bright Future
Electrical Construction s Fire Alarm s Special Projects s Energy
Member of
REND
ERIN
G: EL
KUS M
ANFR
EDI A
RCHI
TECT
S
David Cannistraro
www.high-profile.com
June 2016 9
Boston Plasterers’ & Cement Masons Local 534 serving: MA, NH, ME & VT,America’s Oldest Building and Construction Trades International Union
Since 1864Our trained and skilled craftsmen are just a phone call away.
We offer reliable, responsible, highly qualified and competent personnel, statecertified apprenticeship and training program. OSHA certified membership. We
are committed to quality and performance.Sub ContractorsA1 Concrete CuttingAngelini PlasteringAustin Ornamental Inc.Back Bay ConcreteBidgood Alloc.Cape Cod PlasteringCavalieri Const.Century DrywallComponents Spray FireproofingD & M ConcreteEast Coast FireproofingF.C.F. Concrete FloorsG & G Plaster & EIFSH. Carr & SonIsland Lath & PlasterJ.R.J. ConstructionJohn L. Ciman & SonJ.L. MarshallM.L. McDonald Co.Mailoux Bros. ConstructionMecca Const. Corp.New England DecksPolcari Plasterworks, Inc.Ricmor Construction, Inc.S & F ConcreteStafford Construction
Plasterers:Veneer PlasterVenetian Polished PlasterThree coat conventional PlasterOrnamental PlasterHistorical Restoration & PreservationE.I.F.S.Portland Cement (Stucco)FireproofingCement Masons:FlatworkSidewalksPool DecksDecorative Concrete OverlaysStamped ConcreteConcrete Repair & RestorationEpoxy, Seamless and CompositionFlooring *and much more*
For More Information Please CallPeter Stracuzzi, Jr. Industry Analyst
Office: 617-825-5200 • Cell: 617-750-0896Website: www.opcmialocal534.org
Boston Plasterers’& Cement Masons Local 534 serving: MA, NH, ME & VT,America’s Oldest Building and Construction Trades International Union Since 1864
Our trained and skilled craftsmen are just a phone call away.We offer reliable, responsible, highly qualifi ed and competent personnel,
state certifi ed apprenticeship and training program. OSHA certifi ed membership. We are committed to quality and performance.
Sub ContractorsA1 Concrete CuttingAngelini PlasteringAustin Ornamental Inc.Back Bay ConcreteBidgood AssociatesCavalieri ConstructionCentury DrywallComponent Spray Fireproofi ngEast Coast Fireproofi ngFazio ConstructionG & C Concrete ConstructionH. Carr & SonIsland Lath & PlasterJ.R.J. ConstructionJ.L. MarshallLiberty Construction Services LLCM.L. McDonald Co.Mass Acoustics Inc.Marguerite Concrete, Inc.New England DecksNew England Finish Systems Ricmor Construction, Inc.S & F Concrete Silverback Construction
Plasterers:Veneer PlasterVenetian Polished PlasterThree coat conventional PlasterOrnamental PlasterHistorical Restoration & PreservationE.I.F.S.Portland Cement (Stucco)Fireproofi ng
Cement Masons:FlatworkSidewalksPool DecksDecorative Concrete OverlaysStamped ConcreteConcrete Repair & RestorationEpoxy, Seamless and CompositionFlooring *and much more*
For More Information Please CallPeter Stracuzzi, Jr. Industry Analyst
Offi ce: 617-825-5200 • Cell: 617-750-0896Boston Plasterers & Cement Masons Local 534
Trinity Breaks Ground on Boston East Healthcare FacilitiesDesign for Patients and Providers
by Tony Cavallaro
by Hani Mardini
Designers of healthcare facilities must consider the needs of both the patients and the healthcare providers who will live and work within the surroundings. Healthcare designers can couple the level of aesthetic comfort offered throughout the environment while integrating design strategies that lead to improved patient safety, reduced staff fatigue, increased effectiveness in delivering care, and improved overall healthcare quality.
The outcomes needed in healthcare design must also be balanced with the financial limitations that many healthcare organizations face. The U.S. healthcare system is under constant pressure to deliver optimal care with the latest technologies for less money. With the costs of certain aspects of the industry rising along with shrinking reimbursement allowances, the
need to operate as efficiently as possible has never been more important.
Lean initiatives and new technologies such as advances in CAD software and building information modeling (BIM) increase efficiency in the design and con-struction process and avoid spiraling con-struction costs. BIM technology enables an integrated design process in which architects, consultants, general contrac-tors, subcontractors, and vendors can participate in the design and construction arena. This approach also offers previews of equipment and furniture layout in 3D BIM modeling; walk-through animations and renderings; daylight simulations and energy analysis; high quality construction documentation; and accurate estimates of quantities and cost, to name a few. Likewise, the Lean design and construc-tion process complements a method that allows for total collaboration of all disci-plines with impeccable coordination, and targets areas such as waiting, inefficient conveyance, excess inventory, unneces-sary motion (such as lengthy walking distances for nursing staff or excessive patient transport), and repeat of processes.
continued to page 23
E.G. Sawyer Progresses on LGH
Lawrence General Hospital surgical building
Lawrence, MA – E.G. Sawyer Company,of Weymouth is in progress with the two-phase electrical construction of Lawrence General Hospital’s new 43,627sf surgical building and a 15,450sf electrical renovation at the existing healthcare facility.
E.G. Sawyer is working on a project team headed by general contractor, Bond Brothers, of Everett. MorrisSwitzer – Environments for Health, based in Boston, is the project architect, and Vanderweil, of Boston, is providing engineering services.
The project scope for the new building includes installation of primary and emergency power, fire alarm, security, and nurse call systems, and the build-out of seven state-of-the-art operating rooms, a catheterization laboratory, and interventional radiology room. The new building’s electrical service is comprised of 480/277V, 2,400A double-ended switchgear, two 1,000KW generators and 480/277V, 5,000A paralleling switchgear, 200 KVA UPS, and multiple panel boards. The new surgical center will open in September 2016.
The renovation project, located in Lawrence General’s emergency building, involves the integration of existing automatic transfer switches (ATS) to the new generators. The project is being handled in two phases, as the occupied
hospital’s electrical services must remain operational throughout the project. Use of the existing electrical infrastructure is required during the first phase, and close coordination between E.G. Sawyer and hospital facility personnel is critical, as the intricate project involves the NECA contractor’s crew to trace existing circuits and systems to ensure there is no interruption of power. The renovated area is scheduled to open in late February 2017.
E.G. Sawyer project manager Rick Goulet and general foreman Conrad Eleckna are managing a field crew of 24 IBEW Local 103 electricians in the two-year project.
LCN, the tel/data and security division of E.G. Sawyer, is providing security and tel/data services, with project manager Scott Lucca and foreman Bob Leblanc supervising a crew of IBEW technicians.
MEP Design Trends for Healthcare
Hospitals and Academic Medical Centers (AMC) are some of the largest consumers of energy and water in the built environment. Climate change and environmental awareness are increasing demands for green solutions to these buildings’ resource requirements. Sustainable design has been at the forefront of our industry for many years With green rating systems such as LEED, challenges such as the AIA 2030 Commitment, and by extension, the Target 100 program, as well as advances in energy codes, new buildings are being built with a focus on better use of resources.
There is also a growing trend towards making medical facilities more “well.” Human wellness, a measure much beyond building green, is being factored into the architectural design and construction of buildings. This includes creating spaces that are healthier for occupants, with better airflow and ventilation, and
weaving landscape into the building aesthetics. Most importantly, the space created (within a building as well as outside the building) foster the patient’s natural inclination to recover from their treatments and illness through the positive surroundings.
Trends indicate increased stringent requirements for building energy codes that will affect how MEP systems will need to perform when it comes to environmental impact. Although our industry does not yet regulate wellness in medical building design, there are new guidelines such as WELL Building Standard, which is geared towards human health and wellness, which includes a focus on understanding of lighting, air, and water quality systems. While Facilities Guideline Institute (FGI) may require a certain number of air changes in a space, WELL would also focus on the quality of that air and thus contribute to mitigation of Hospital Acquired Infection (HAI) and increased patient comfort. Good lighting design minimizes glare and eye strain, and using daylighting accompanied by a good window view has a positive impact on the patient’s wellbeing.
Our team believes that right selection of MEP systems during design helps to protect the environment and save energy,
continued to page 36
www.high-profile.com
June 201610
Building EnvelopeRestoration Specialists
• Concrete Restoration
• Façade Inspection & Repair
• Masonry Restoration
• Sealant Removal &Replacement
• Parking Garage Repair& Traffic Coatings
• Specialty Coatings
• Waterproofing Systems
• Roofing: Flat, Slate,Copper, Sheet Metal
• Roofing Maintenance
• Emergency Repairs
• Structural Repairs
617-628-8888 www.weatherproofing.net
AFTER
BEFORE
Since 1981, Alpha Weatherproofing Corporationhas served engineers, architects, buildingowners and property managers throughout NewEngland with comprehensive weatherproofingand building envelope restoration services.Booth 630
Visit us
at NEBFM
June 29, 30
APC SERVICES of NEW ENGLAND
PAINTING: Interior • Exterior • Faux Finishes
COATINGS: Waterproofing • Metal Roofs • Brick and Concrete
Parking Garage Painting and Coatings
ABRASIVE BLASTING: Aluminum Oxide • Dry Ice Walnut Shells
Black Beauty • High Pressure Power Washing Industrial Cleanup • Wall Covering • Plaster Repair
APC SERVICES of NEW ENGLAND (Formerly Ahern Painting Co )
781-665-5600 • Fax: 781-665-5612 www.apcne.com
High-Profile Focus: Healthcare Facilities
E.S. Boulos Completes First Phase Eastern ME Med. Ctr. ModernizationBangor, ME – NECA Maine Division contractor, E.S. Boulos Company, of Westbrook, Maine, has recently completed the first phase of electrical construction of the Eastern Maine Medical Center (EMMC) modernization project in Bangor. The project scope at the new eight-story, 350,000sf facility included providing primary and emergency power, lighting and lighting controls, convenience power, voice/data communications, fire alarm, nurse call, AV, and security system installations. Phase 1 of the state-of-the-art healthcare facility includes a new entrance, lobby, 29-bed neonatal intensive care unit, and 32-bed cardiac telemetry unit.
The facility, officially named the Penobscot Pavilion, is centrally located within the existing Eastern Maine Medical Center complex.
E.S. Boulos is working with a project team headed by general contractor Cianbro / Brassfield Gorrie, of Pittsfield, Maine. The team also included architect MorrisSwitzer – Environments for Health, Portland, Maine.
The project required close coordination between E.S. Boulos and EMMC personnel, as the contractor coordinated all electrical shutdowns and cutovers to ensure the project was handled
without disruption to existing operations.At peak construction, E.S. Boulos
supervised a field crew of 40 electricians and technicians from IBEW Local 1253 in Fairfield, Maine. The project team was headed by project manager Jason Queen, project engineer Mark Reynolds, BIM coordinator Tom Clements, superintendent John Federich, and general foreman Tyler Poulin.
E.S. Boulos is also well under way with the second phase of the project, which includes electrical installations for a pre- and post-recovery unit and nuclear medicine suite; a new cardiac suite with eight procedure rooms; 14 new operating rooms outfitted with state-of-the-art technology; a new anesthesia care unit; and a new intensive care unit.
EMMC modernization aerial view / MorrisSwitzer – Environments for Health
Construction Contamination Hurts
A hospital needs to build an addition or renovate existing space. Is the bid price the most important consideration? What about the financial and health risks of hiring an unqualified company? You’d have to consider the impact such a move would have on the bottom line of the entire facility, not just the construction project, wouldn’t you?
In addition to the normal concerns construction users have about quality, durability, and cost, healthcare providers have more to consider. Healing patients is a complicated task, one that gets much harder when contaminants from the materials, process, and workers involved in a building project are introduced.
The United Brotherhood of Carpenters and employer partners have developed a training program for apprentices and journey-level workers called Infection Control Risk Assessment (ICRA). The curriculum was developed through a cooperative effort of national leaders in healthcare, construction management, and union training programs and aims to address the specific concerns of these unique building projects.
Once developed, the ICRA program was taught at the union’s International Training Center to hundreds of UBC
trainers who took it back to their local areas and held classes with carpenters in the field.
The ICRA curriculum, in part, includes teaching awareness of hazards, including asbestos, lead, mold, silica, and other materials, as well as blood-borne pathogens and other hospital-specific concerns. Trainees learn how to identify and classify work areas to maintain an environment that can minimize risks, illness, and injury. Specialized clothing and equipment are part of the package.
continued to page 14
by Bert Durand
Carpenters Union members
www.high-profile.com
June 2016 11
Structural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelStructural SteelMiscellaneous MetalsMiscellaneous MetalsMiscellaneous MetalsMiscellaneous MetalsMiscellaneous MetalsMiscellaneous Metals
www.QSRsteel.com • 860.548.0248 300 Locust Street Hartford, Connecticut 06114
Renovation Specialists Fabricators Erectors
SBE Certifi ed with the State of Connecticut
2015 Best of the Best SAFETY AWARD
Specialty Contractor
2016 Diamond
STEP AWARD1 of only 4 awarded
Commercial • Industrial • Retail • Public Schools • Universities Offi ces • Restaurants • Hospitality • Public Safety • Town Facilities
www.high-profile.com
June 201612 High-Profile Focus: Healthcare Facilities
Precast Complete at Stamford Physicians CenterStamford, CT – The new Stamford Integrated Care Pavilion/Medical Office Building is located adjacent to the Stamford Hospital in Stamford, and will provide ambulatory and specialty-care services that create a coordinated health service, officials say.
The facility provides 247,046sf of medical offices (three levels) and five levels of parking on a 120sf x 300sf footprint and took full advantage of a precast concrete structural framing system.
“The significant advantage that precast concrete provided was that it offered a consistent and uniform structure and appearance throughout the medical and parking levels,” says Robert Koenig, senior project manager at Suffolk Construction, the construction manager on the project. “The hospital campus space was very tight. Rather than create a low-rise medical building with separate parking alongside, we decided to build both facilities in the same system.”
“We looked at cast-in-place concrete and steel, as well as hybrid systems,” Koenig says. “None of them provided the benefits of the precast concrete system. It offered the most effective system and could be erected quickly to keep us on schedule.”
Blakeslee Prestress fabricated the 912 components needed, which included double tees, girders, columns, shear walls, spandrels, stairs, slabs, and wall panels. The work was completed on a design-assist basis, with Blakeslee’s engineers providing input during the design phase to plan the most efficient sizes and panelization options.
The design features embedded thin brick in the panels at the office levels along with curtain wall at the entrance to create a distinctive welcoming design. Parking levels feature tall spandrels that reflect the
design of the ribbon windows used on the office levels above. “The look is differentiated between the functions, but it has a similar language and is complementary,” Koenig explains.
The design-assist format aided the fast erection, which began in January and completed in April. Blakeslee provided all aspects of the precast concrete design, manufacturing, and field operations, creating a single point of contact to keep the process efficient.
The structure features a long-span prestressed concrete double-tee framing system, offering 60-foot clear spans with minimal floor construction depth. “Long-span construction along with inherent durabil-ity and fire resistance are key common advantages for both parking and office uses,” notes Chris Zarba, di-rector of sales and project development at Blakeslee.
Blakeslee worked with the owner’s design team to develop a unique lateral-bracing system that addressed the functional and operational needs for the two office occupancy uses. The lateral design utilized precast lite walls at the parking levels, which
integrated with the sloping ramped floors needed for vehicular circulation. The lite walls would have been a hindrance in the office space, so Blakeslee suggested a precast moment-frame system for these upper levels to provide large open floor plates with minimal columns and no shear walls.
On the office levels, precast insulated thin brick-clad, loadbearing spandrel panels provided multiple cost efficiencies. The components combined all of the elements of a conventional built-up exterior system, with separate structure, insulation, and exterior finish components. “That resulted in a huge reduction and compression overall of the project schedule,”says Zarba.
The precast concrete structural solution achieves the objectives of lowest cost and fast schedule, which can be attributed to making use of its inherent offsite construction techniques, he notes. “When coupled with the advantages of integrated mixed-use occupancies not readily attainable by other construction methods, the precast system provides an excellent choice for many projects.”
Koenig agrees that the design offers benefits that other projects can use. “There aren’t a lot of these types of projects done these days, in which the parking and office space are combined,” he says. “But it’s a system that works very well, and I expect it will catch on.”
Photo courtesy Blakeslee Prestress, Inc.
NORTHEAST
A Chapter of thePrecast/Prestressed Concrete InstituteA Chapter of the Precast/Prestressed Concrete Institute
Photo courtesy of Shutterstock.
For more information on the benefits of precast concrete or to find a
precaster in your area visit www.exploreprecast.com/pcine-hp
Free Your MIND.. .Schedule Constraints?
Discover a new sense of design freedom with precast concrete.Precast brings inspiration to life. #PrecastSavesTime#PrecastSavesMoney#PrecastReducesRisk#PrecastImprovesEfficiency
16192_PCINE_Stamford_Mixed-use_half-page_article/Schedule_Constraints_ad.indd 1 5/20/16 1:57 PM
THE TEAM:Owner: Stamford Physicians LLC, Stamford, Conn.Designer: WHR Architects Inc., Houston, TexasStructural Engineer: Walter P. Moore, Houston, TexasConstruction Manager: Suffolk Construction Co., BostonPrecaster: Blakeslee Prestress, Branford, Conn.
www.high-profile.com
June 2016 13High-Profile Focus: Healthcare Facilities
WWW.RAYMONDBUCKETGUYS .COM
Visit us at the Northeast Buildings & Facilities Management Show June 29 & 30, 2016, Boston Convention Center
Sales - Service - Support!317 Rte. 27 Raymond, NH 03077
Aerial Work Platform Specialists Solutions for Hard to Reach Indoor / Outdoor Locations in New England
603-895-3803
• 95’ - 170’ Work Height• Single Door Access• Dual Power
• 39’ - 85’ Work Height• Single Door Access• Dual Power
• 13’ - 26’ Work Height• Bi-leveling Chassis• 25° grade / 21° side slope
ReachM aster Falcon Bluelift Bibilift
Grow Smart RI Honors PCHC
Providence, RI – Vision 3 Architects recently celebrated with Providence Community Health Centers (PCHC) the award of Outstanding Smart Growth Project from Grow Smart Rhode Island.
PCHC purchased a former manufacturing facility to develop an entire urban block as a comprehensive healthcare campus to serve its patients in this South Providence community.
Over a 10-year period, Vision 3 Architects and PCHC demolished some buildings, worked to designate others as historic landmarks, renovated existing buildings, and constructed new ones. Two existing historic industrial buildings, formerly Federated Lithograph buildings,
have been renovated and a new, 18,000sf two-story addition constructed to make up the new 41,750sf, LEED Silver certified Prairie Avenue Health Center.
The 50,000sf former Beaman and Smith mill building is now medical office space, funded in part by state and federal historic tax credits, now listed on the National Register of Historic Places, and a winner of a Rhody Award for Historic Preservation from the Rhode Island Historical Preservation & Heritage Commission.
The completed revitalized develop-ment, including a new 4,800sf retail phar-macy, creates a healthcare hub in South Providence.
Providence Community Health Centers
Designing Elec.Health Records Sites
by Jason Costello and Nathan Turner
The requirement for hospitals to convert to electronic health records (EHR) is a significant endeavor that contains many challenges for the successful implementation of the technology. Adoption of EHR systems, as illustrated in recent media articles, can pose a steep learning curve for some medical staff. Technology change is particularly difficult in the ever shifting healthcare environment where staff commonly complain about high stress levels, being overworked, and not having enough time with patients. The EHR training requires a significant time commitment from both the employee and the institution. At the very least, EHR training sites should not contribute to these employee frustrations.
Training locations should be chosen to minimize the impact on employees’ daily commute and routine.
Locating EHR training within
proximity of a clinical facility also reduces travel time for doctors and other employees on call, a hidden expense often overlooked when evaluating sites.
A variety of real estate options should be considered, from repurposing existing space on campus for training rooms to leasing commercial space and fitting out a training center. The most viable from a cost and convenience standpoint is to identify space on campus that can be temporarily utilized for the short but intensive training. Smaller community hospitals can utilize their existing multipurpose room or large conference room as the training setting. These spaces can put limitations on class size and functionality but often have the basic AV requirements for computer instruction and can be readily converted to accommodate the classroom function.
Larger institutions may choose a commercial lease and fit out a custom training center programmed to meet their specific training needs. This provides them with a highly customized classroom setting that aligns with their short-term training plan while addressing other long-term facility needs for meeting rooms, clinical simulation labs, and ongoing EHR training for new staff. When placing a training facility in a commercial
continued to page 23
www.high-profile.com
June 201614 High-Profile Focus: Healthcare Facilities
Mount Auburn Hospital Ctr. CompleteHDS Architect, Walsh Brothers CM
Solarium with floor-to-ceiling glass
Newly designed oncology center
Cambridge, MA – HDS Architecture has completed the design of the new Medical Oncology and Hematology Center located on the main campus of Mount Auburn Hospital. The construction manager was Walsh Brothers.
One of the major components of the project is a new solarium with floor-to-ceiling glass, skylights, and comfortable seating. Other improvements include new patient and family waiting spaces, exam rooms, treatment rooms, and administra-tive space.
Color, fabrics, and furniture were crucial to creating a calm, welcoming,
home-like vibe throughout the space. Nat-ural wood and rich fabrics in the seating areas, combined with warm wood accents throughout the space, contribute to a bal-anced and comfortable patient experience.
Energy-Efficiency Upgrades for VAWest Haven, CT – More than 8 million veterans are provided access to healthcare through the U.S.Veterans Health Admin-istration, the country’s largest healthcare system. As part of the federal program, the VA Connecticut Healthcare system encompasses two ambulatory care centers and six primary care community-based outpatient clinics across the state serving approximately 56,000 patients.
Under the Veterans Health Admin-istration, VA Medical Centers have a number of energy conservation programs and construction goals to meet. Recently, the ambulatory care center and inpatient facility in West Haven, Conn., partnered with The United Illuminating Company (UI) to develop strategic plans and assess financial assistance for energy-efficiency projects. They aimed to minimize wasted resources and reduce operating costs to help meet their conservation goals.
With UI’s expertise and resources, the VA Medical Center upgraded to high-ef-ficiency interior lighting through the Energy Conscious Blueprint program, as
part of the Energize Connecticut initiative. The program provided assistance and in-stallation of high-quality lighting systems, using cost-effective modern lighting tech-nologies to replace old fixtures.
“Patient care is our top priority. The installation plan provided by Energize Connecticut was customized to our needs, making upgrades to one room at a time to accommodate our patient care areas,” said Joseph Simonetta of the VA Medical Center. “By investing in energy efficiency now, we’re saving money that can be put toward additional improvements in patient care in the future.”
VA Medical lighting
Local healthcare facilities gain peace of mind that not only are union workers earning a decent wage, they’re provided decent healthcare benefits that allow them to get treatment in the very facilities they’re building. They’ve got the cutting-edge skills to ensure healthcare providers offer the best care during and after the project is complete.
The investment in the program is significant, but because it is made on a national level between labor and management partners, it provides a tremendous bang for the buck.
Union carpenters and contractors are rightly proud of the ICRA program. It provides a competitive advantage in bidding to facilities that truly care about treating patients in a health environment. And it highlights the cooperative effort that leads to better building.
The ICRA program has been implemented the way many other UBC training programs have made their way from industry leaders to hands in the field.
The Carpenters International Train-ing Fund (CITF) is one of the country’s largest producer of text books. Its online Build-a-Book program lets training coordinators across the country pull standardized chapters from more than 80 CITF textbooks to create state-of-the art, targeted curriculum and companion in-structor materials that cross all skill sets.
Here in New England, union carpenters train at 17 locations, including the Carpenters Center in Boston and the New England Carpenters Training Center in Millbury, Mass.
Bert Durand is communications di-rector of New England Regional Council of Carpenters.
Construction Contamination Hurtscontinued from page 10
www.high-profile.com
June 2016 15High-Profile Focus: Healthcare Facilities
Caldwell & Walsh Completes First CLEANSUITE System Hybrid OR
by Sharon Apotheker Pomeroy
New York – Caldwell & Walsh completed construction of the first hybrid operating room at New York University Langone Medical Center utilizing a CLEANSUITE system.
CLEANSUITE systems are prede-signed and fabricated to be delivered in fully integrated modules. Each was cus-tom-designed to include all ceiling com-ponents such as integral LED lighting, med-gas, boom mount, diffuser screens, filters, duct connections, and sprinkler piping. The benefits of the CLEANSUITE are many. The compact, low-profile design works well in tight spaces with minimal above-ceiling clearances. Whether used in a new or renovated space, it can reduce the timeline for design and construction, potentially resulting in faster revenue generation.
The operating suite where the project is located encompasses 18 active
operating rooms. No interruptions, delays, or cancellations of surgeries due to construction were permitted. Managing the construction with minimum cost and maximum value while considering the client’s needs were among the objectives to meet. With prefab/offsite construction and Lean construction methods among emerging trends being watched this year, Caldwell & Walsh proposed the CLEANSUITE option to the project team, citing benefits such as a reduction in the construction schedule, less waste, and enhanced coordination. “We expect applications like this to be an accelerating trend,” commented Mark Sanborn, project manager for Caldwell & Walsh.
“It offers worthwhile efficiencies. With consensus from the project team, we moved forward.”
In a previous phase of work completed by Caldwell & Walsh, new sterile storage rooms were constructed. To accommodate the hybrid operating room and its associated control and sterile storage rooms, a sterile storage room was demolished. Structural steel was added below the slab to provide reinforcement for the new operating room equipment. Shielding was installed in the floor and walls to work in concert with the imaging equipment. New infrastructure was provided, including an air-handling unit and return fan. Temporary HVAC
was provided for adjacent areas affected during construction.
Once the CLEANSUITE components were delivered, each was installed and hung from new structural steel and Unistrut supports. Subcontractors and hospital vendors then made final connections to the system.
Minimizing onsite coordination of trades during installation accelerated the schedule. “In this type of environment, reducing the number of subcontractors onsite was helpful,” noted Nick Chimienti, project superintendent. “Less congestion in the construction zone enhanced safety for the workers and anyone accessing adjacent areas.”
Given the time constraints to get this space operational and the need to con-struct without disruptions, the CLEAN-SUITE proved to be a valuable option. Construction activities were concurrent, rather than consecutive, compressing the construction timeline. The operating room has customized features with op-timal comfort and performance for sur-geons, where contaminants are directed away from personnel and patients during surgeries by way of laminar airflow. This was a successful undertaking where all stakeholders collaborated to ensure seam-less delivery.
Construction Manager
General Contractor
Design/Builder
MassachusettsIndependence Wharf470 Atlantic Avenue - Suite 400Boston, MA 02210
617.273.8470
Caldwell & Walsh Building Construction, Inc.
Connecticut17 Berkshire RoadSandy Hook, CT 06482
203.270.4500
New YorkOne Grand Central Place60 East 42nd Street - Suite 601New York, NY 10165
212.661.6979
© Sarah Mechling/Perkins Eastman
© Kevin Chu/KCJP
caldwellandwalsh.com© Kevin Chu/KCJP
It’s not just about construction, it’s about sharing knowledge and proven methods of delivering superior quality projects. Our success is not only measured by meeting schedules and budgets, but by bringing communities the best possible healthcare facilities.
Hybrid operating room at New York University Langone Medical Center
continued to page 24
www.high-profile.com
June 201616 High-Profile Focus: Healthcare Facilities
• Metal stud framing• Drywall installation & fi nishing• Rough carpentry• Acoustical ceilings
• Doors, frames, and hardware• Cold formed metal trusses• EIFS• Fiber cement siding
www.metrowalls.net
Your Choice for Commercial Framing and Drywall Services
49 Hancock Street, Manchester, NH • 603-668-264823 Evergreen Drive, Portland, ME • 207 887 9065
We have the manpower and the experience to deliver high quality work, on-time and on budget. Our services include:
Seabrook Commons
High Liner Foods Spruce Peak St. Anselm College
One Size Does Not Fit AllDesigning a Lean Event that Fits your Healthcare Project
by Teresa Wilson
Designing healthcare projects can be a fraught process; time is tight, money is always a factor, and there never seems to be enough space to do what you want within your budget. How do you deliver patient-centered care while fostering collaboration, maximizing resources, and allowing flexibility for future innovation? Many organizations look to Lean Design to help navigate this process.
Lean is a methodology for producing a product or a service that provides value for the customer in the most efficient, least wasteful way. A lean organization understands it is a long-term commitment, requiring involvement and support by everyone to promote continuous improve-ment. Steffian Bradley Architects (SBA) and our strategic healthcare planning group, Sterling Planning Alliance, are passionate about incorporating contin-uous improvement within our own firm,
and we are enthusiastic about sharing our experiences with clients as we craft Lean Events to fit within the culture of their organizations. There are multiple types of Lean Events that can be utilized to create better outcomes.Lean Kaizen Blitz SWAT Events
Intensive one-week events: This approach embeds the planning team within the client facility to produce high-level campus master plans. The team’s onsite dedication and focus provide an opportunity to quickly assess how well the physical plant and site support
hospital priorities for patient care, staff, clinical, and support services. As the SWAT event progresses, options are vetted with the hospital senior leadership group for go/no-go status. During the report-out, direction is given to further develop selected options. This type of event is a good fit for organizations that want a big picture look at the constraints and opportunities for targeted growth or reallocation of space.Lean Operational Analysis
When an organization needs to understand its current operational state, data analysis,
interviews, and observations can be used to evaluate the utilization of current resources and recommend solutions. As part of a Lean Event in an academic outpatient clinic, Sterling reviewed exam room throughput data and held events with check-in/out staff to create standard protocols while SBA shadowed staff during patient encounters to determine the best place to allocate resources for medical assistants. These types of Lean Events assist organizations in analyzing operations and can help determine if solutions can be found through operational changes or if additional resources are needed.Lean 2P Events (Process Preparation)
These are week-long events for creating change in an organization using Lean tools to understand initial and target states. Events are held with teams of representative staff at all levels and patient volunteers to produce an outcome where everyone performs at the top of their license for optimal patient care. Each event builds on lessons learned from its predecessors and becomes a means for validating assumptions and continuous improvement. Lean 2P events assist
continued to page 22
Baystate Medical Center south wing fit-out / Robert Benson Photography
www.landtechinc.com / www.ltc3d.com978-692-6100
Site Civil Engineering • Land Surveying • Construction Layout
3D Laser Scanning • 3D Site and BIM Modeling
Celebrating 25 Years of Survey & Engineering Excellence
www.high-profile.com
June 2016 17High-Profile Focus: Healthcare Facilities
At LAB, we work with companies and universities to create innovative spacesfor scientific exploration. With over 20 years of experience, we bringknowledge and creativity to design successful and engaging environments for research, teaching and learning.
Art for Thundermist Health
Wakefield, RI – Corporate Art Group has recently completed an oceanic-themed art installation for the Thundermist Health Care Facility in Wakefield. Art consultant Briana Rignanese worked closely with Thundermist to develop an art package that brought a sense of peace to patients while stylistically flowing throughout the entire facility.
Creating an art package for a healthcare facility is a completely unique process from any other industry. Whether it is an assisted living facility or a blood lab, consultants at Corporate Art Group collaborated with interior designers to create an atmosphere that maintains patient and staff well being.
A total of 41 artworks ranging from photography, painting, and sculpture was incorporated into the Thundermist facility. Seascapes can begin to look the
same; to keep the artwork refreshing, Rignanese made sure to use pieces that were original and dynamic. Photographs of local beach scenes were printed in-house, on large-format printers, and stretched as a gallery wrap for the exam rooms. Abstract images with strong nautical elements were displayed using a floater frame, giving the works a contemporary feel.
O&G Completes Hospital Expansion
Torrington, CT – O&G Industries, Connecticut’s largest privately held construction company, recently completed the fit-out of a 2,400sf space within St. Francis Hospital’s Comprehensive Women’s Health Center. The project architect was TRO of Boston.
The project created six new exam rooms, a procedure room, office areas, and
a nursing station, expanding the capabili-ties of the health center. O&G, the project’s general contractor, self-performed work, which included selective demolition, construction of new partitions, interior finishes, built-in casework, and associated mechanical and electrical services.
The facility was turned over to the hospital in May.
St. Francis Hospital’s Comprehensive Women’s Health Center
Design for the way YOU work.
www.mp-architects.com
CORPORATE | HEALTHCARE | PROFESSIONAL SERVICES
RESEARCH/LAB | REAL ESTATE DEVELOPMENT
www.high-profile.com
June 201618 High-Profile Focus: Healthcare Facilities
amentaemma.comHartford | Manhattan | Stamford | Cambridge
IIDA New England 2016 Design Awards
Best Healthcare Design
Reproductive Medicine Associates of Connecticut
Promote Healing Through Architecture
Leading a healthy lifestyle has become standard in today’s world. From organic foods to preventive care to exercise and fitness to office wellness programs, more and more people take part in the practice of self-driven health. It is no longer a matter of just what you eat but a myriad of factors that play a large part in leading us to great health.
When designing healthcare facilities, architects, designers, and landscape architects understand that the healing starts in the planning of the structure and its outdoor environment. Healing environments are described as nurturing and therapeutic and most importantly, as places that reduce stress. Not only by
Rebecca Dillon
is reduced stress among residents and patients needed, it is also a key factor in helping staff to better serve their patients. Buildings designed under this premise promote health, healing, and recovery.
At Gawron Turgeon Architects, we use certain parameters to help us determine the right elements for each healthcare client’s healing environment. Much of the evidence-based design research relates
Healing statue
Reception hallway
healing spaces to nature and natural elements. That is exactly where we begin, with nature. As humans, we have an innate desire to be connected to nature. Scientific studies support the positive impact that natural forces have on us, and the use of these elements can enrich our environments.
Another parameter is the understanding of how our body and mind experience the built environment. We ingest the space’s volume, proportions, and form, and our perception of the space defines our experience. Along this same vein of experience is the use of our senses. Our sensory experience can evoke emotion. Planning through lighting, sound, color, and texture can promote positive feelings for healing. Lastly, a sense of place and/or spirituality to make a space special should be integrated into the surroundings. Rooms for peaceful respite and décor that can inspire the mind are aspects that should find their
way into healthy space planning.The four areas defined above are a
starting place for a larger conversation with stakeholders to discuss promoting healing from the ground up. Through research with patients, families, staff, and more, a lot can be learned to help define these aspects specific to the facility and its environment. No area should be free from being assessed as an area that can help drive the health of the people within the space.
Rebecca Dillon, AIA, LEED AP BD+C, ME & NH, is a licensed architect principal and vice president of architecture at Gawron Turgeon Architects in Scarborough, Maine.
Hospice sanctuary
Landscape architect plan
P A V E R S B Y I D E A L
C A L L 1 - 8 0 0 - 2 4 - I D E A L F O R A P E R M E A B L E L U N C H & L E A R N
Ideal Concrete Block Co.Waltham & Westford, MA
www.IdealConcreteBlock.comSINCE 1923
The Solution to Stormwater Runoffis Right Under Your FeetAqua-Bric,® Eco-Stone® & Andover 5511™
■ High-strength 9000psi pavement ■ Doesn’t require annual vacuuming■ Freeze-thaw and snow-plow safe ■ Qualifies for LEED® credits■ ADA compliant - firm, stable, slip-resistant■ Cost competitive to conventional pavements
Ideal permeable pavers offer built-in technology - the pavement and base act as a stormwater treatment system that reduces or eliminates runoff
to reduce pollutants and improve water quality.
www.high-profile.com
June 2016 19High-Profile Focus: Healthcare Facilities
Ph: 603-886-3436Fax: 603-881-9953
www.slchassesteelfab.comEmail: [email protected]
8 Christine Drive, Hudson, NH 03051
Quality Workmanship & Experience
Competitive Pricing
In-house Detailing Staff Utilizing SDS/2 Software
Structural Steel | Miscellaneous Metals | Fabrication | Erection
Proud Members of:
Brigham & Women’s Hospital New Garden CaféBruner/Cott Works with CAMA
Boston – The Garden Café @ 75 Francis, the end product of a complete overhaul and restructuring of the main dining facility at Brigham & Women’s Hospital in Boston, represents the “new amenities” trend in healthcare design, enhancing the end user experience for patients, visitors, and hospital staff alike. The space is on the second floor of a 1970s Bertrand Goldberg clover-shaped, Brutalist tower directly off of the Pike, the hospital’s main circulation spine. The existing
north-facing space had low ceilings, limited daylight, and uninspiring views.
Brigham & Women’s Hospital hired Bruner/Cott to help assess their campuswide food service offerings, and plan for the next 10 years of evolution into becoming a dining leader. BWH and Bruner/Cott worked with CAMA Inc. Healthcare Design to develop a range of nine health and nutrition-based venues for their campus, two of which will be realized shortly.
The project team included foodservice consultant Colburn & Guyette, project manager Ed Arons, architect Bruner/ Cott & Associates, and project manager: Tracey Marquis.
Designed to improve the interior environment, food choices, and customer experience, the project will join the two north pods of the second floor via an addition, replace the exterior building skin at this floor, and completely renovate the cafeteria space. The introduction of
Main dining area Street perspective
large planting beds, natural light, and enhanced views to the exterior are part of a wider initiative by the hospital to bring a stronger presence of nature and respite to its campus.
The project objective from a food service perspective was to provide healthy food options and associated nutritional information to inform/teach staff and visitors the benefits of healthy dining choices.
www.high-profile.com
June 201620 High-Profile Focus: Healthcare Facilities
SIG SAUER US HeadquartersExeter Area YMCA Rockingham Toyota
Become a Jewett Team Member! We’re Currently Looking for Professional and Success-Driven
Construction Project Managers and Superintendents.
Industrial, Manufacturing and Warehousing Facilities
Educational, Institutional and Medical Facilities
Recreational Facilities
Auto Dealerships
www.jewettconstruction.com
Refreshing Improvements: UMass Memorial Medical CenterWorcester, MA – UMass Memorial Medical Center began construction recently at both its University Hospital and Memorial Hospital campuses, on a 250,000sf, five-year phased redesign project. Currently known as the Campus Refresh, the project designed by The S/L/A/M Collaborative consists of new interior standards and upgrades for both campuses. The scope includes finish upgrades to medical/surgical patient rooms, staff support spaces, and public spaces on patient floors including full renovations to provide for new rooms compliant with the Americans with Disabilities Act.
The plan for this $200 million refresh project included the construction of a working mock-up new patient rooms on both campuses, which opened to patients and staff in the beginning of February. The newly refreshed room on the third floor of the University Hospital campus reflects the changes that UMass will bring to the medical center’s hospitals in the coming years. More than 600 staff and patient surveys were completed to assess design features and finishes in the mock-ups. Participants from a multitude of disciplines responded to questions regarding overall aesthetics and function of the rooms.
One of the design features is a new
glass panel in the patient room door to allow for staff visibility of the patient with the door closed. “Currently, the doors are kept open,” says Melissa Anthony, a SLAM designer on the project. “If the patient room doors are able to be closed, the environment should improve due to decreased noise disturbance and greater patient satisfaction in addition to a higher sense of privacy.” Another important feature is the inclusion of full-coverage patient ceiling lifts in each room for every bed, a safety feature that benefits both the patient and the caregivers. Staff and patient feedback, in addition to multiple Lean 3P events, have positively impacted the design decisions for the refreshed patient room.
In addition to the implementation of EPIC, a digitalized system used for patient charting and electronic medical records,
the traditional nurse station is being redesigned as a collaborative team station in order to deliver interdisciplinary team-based care. “UMass Memorial Medical Center is an academic institution; the environment should foster teaching and learning,” says Anthony. Modular team stations will provide a variety of shared touchdown, dedicated workstations and team break-out space with the ability to adapt to changing workflow in the years to come. New educational seminar rooms supporting the current philosophy for academic instruction will be included throughout the facility.
Staff and patient involvement is an important and continuous aspect of the project’s success. The incorporation of Lean Design strategies aligning with the hospitals’ new process of collaboration and goals of enhancing teaching and learning throughout, empower the
The newly refreshed room on the third floor of the University Hospital campus
A public pathway stair at the Memorial Medical Center campus
A full working mock-up of a new patient room on both campuses
success of the delivery of care at UMass Memorial Medical Center.
The hospital has set forth a project charter to standardize, declutter, and organize spaces, allowing for improved wayfinding and efficiency for patients, visitors, and staff. “As part of the nursing unit updates, it is great to see the facility embrace a more patient-centered environment that includes a move to private patient rooms at the Memorial Hospital campus. Coupled with the goal of making the patient floors more consistent, the benefit will be improving patient satisfaction and staff work flow. The project fits the hospital’s mandate of being the best place to give care and the best place to get care,” says David Neal, SLAM principal-in-charge. Furthermore, the public pathway at the Memorial campus is undergoing renovations to enhance the circulation of patients, family, and visitors that are navigating throughout the hospital.
www.high-profile.com
June 2016 21High-Profile Focus: Healthcare Facilities
Ahead of the Curve
Regional Offices
Charlotte, NC
Durham, NC
Duluth, GA
Pelham, AL www.waynejgriffinelectric.com MA Lic A8999 CT Lic ELC.0123697-E1
At Wayne J. Griffin Electric, Inc., we know our clients
have high expectations, and so do we. Emphasizing
and providing opportunities for education and
training enables our team to implement innovative
solutions and cost-effective strategies on projects.
Our customers deserve the very best, which is why
we strive to always be well-informed about current
trends and concepts.
Corporate Headquarters
116 Hopping Brook Road
Holliston, MA 01746
(508) 429-8830
Framingham State University’s Hemenway HallFramingham, MA
Photo Credit: Ellenzweig
Sound Matters in Healthcare Design
by Kristen Murphy
Creating a healing environment in the midst of a continually operating workspace seems like a paradox. Fortunately, proper acoustical design can help foster quiet spaces for patients to rest while also protecting their private information. Following are common guidelines for sound control that acoustical professionals consider in healthcare projects:Identify the sourceTo help reduce noise, you first need to identify what’s causing it. Patients are exposed to a broad variety of noise-producing objects and activities, from medical equipment, to activity inside and outside of their rooms, to helipads and ambulances outside.
Once the most critical sources of disturbing noise have been identified, they can be addressed. Some will likely need professional intervention (e.g.,
mechanical system noise, improved wall constructions, etc.), but others can be solved creatively. Can alarms be reduced? Can doors be shut? Can squeaky cart wheels be replaced?Keep noise containedWhile it’s important for a patient to understand their caregivers clearly, their neighbors shouldn’t. The walls of a patient’s room should be the first line of defense in keeping surrounding noise out and private information in.
Acoustical consultants work with the rest of the design team to ensure that loud spaces (such as lobbies or mechanical rooms) are isolated from patients to the extent possible, that the construction separating them is robust, and that leaks are minimized. (Think about all of the services passing through the walls at the patients’ beds!) It’s all in the details.Use absorptive materials to stop the spreadAlthough a sleep-deprived patient might love to sequester all noisy objects with thick walls, the demands of monitoring, ease of mobility, and other factors make that impractical.
Once the layout of the space is
continued to page 47
Cerebral Palsy MA Saves EnergyPartners with Solect Energy
Stoughton – Cerebral Palsy of Massachu-setts has partnered with Solect Energy of Hopkinton to install a 109 kilowatt (kW) so-lar energy system on the roof of its Stough-ton location. The solar array is expected to cover up to 50% of the organization’s annual electricity use, allowing the agency to apply thousands of dollars in operational savings to furthering its mission.
Cerebral Palsy of MA has long been a supporter of green energy and sustain-ability. The organization first considered going solar as a way to reduce costs while improving the environment. The agency made a choice to own the system outright, an atypical financing solution for a nonprofit, since most do not have the up-front capital and do not qualify for the tax incentives associated with owning a solar system.
“The fact that we will be producing
our own energy and that it will pay itself off in a relatively short period of time were important factors in making this financing decision,” said Larry Spencer, CEO of Cerebral Palsy of MA.
The solar array will create in excess of $1 million in net cash flow over its 25-year warranty period. Despite being a not for profit, the savings will be generated by avoided electricity and delivery expenses, and income from Solar Renewable Energy Certificates (SRECs), the state incentive that has helped Massachusetts become a leader in solar energy deployment.
In addition to its solar installation, Cerebral Palsy of MA has upgraded all of the lighting fixtures in its building to LED bulbs, and completed an HVAC VFD integration project to reduce the energy used to heat/cool the building and enhance the overall comfort of the employees working in the building.
www.high-profile.com
June 201622
SPECIALIZING IN THE FOLLOWING MARKET SECTORS:
Academic | Entertainment & Venue | Healthcare | Hospitality | Mixed-Use
Multi-Level Subterranean | Multi-Story Residential | O�ce | Renovation
Research & Laboratory | Retail | Structured Parking
CREATIVE TO THE CORE
MCSAL.COM617.737.0040 101 FEDERAL ST. 11TH FLOOR BOSTON, MA 02110
McSal_ad_highProfile_qtr_FA2.pdf 1 5/26/16 12:58 PM High-Profile Focus: Healthcare Facilities
ARCHITECTURE ENGINEERING DESIGN/BUILDINTERIOR DESIGN CONSTRUCTION MANAGEMENT
daiarchitects.commonitorbuilders.com
BOSTON MAINE
OVER
years30
ofserviceSince 1984
DAI and MBI Address Health Crisis
Webster, MA – The DiGiorgio Associates Inc. (DAI) and Monitor Builders Inc. (MBI) team is currently working with Harrington HealthCare in Webster on an outpatient behavioral health counseling construction project and an inpatient psychiatric unit. The estimated construction cost for these projects is $3.2 million with an estimated completion of October 2016.
The new inpatient facility will be the first in Central and Western Massachu-
setts to offer a specialty track for patients suffering from both mental illness and substance abuse. Colors and lighting were selected to create a soothing atmosphere, and flooring was selected for safety, maintenance, sustainability, and comfort.
The layout was designed to optimize sight lines between staff and patient areas and to minimize travel distances for staff.
DiGiorgio Associates Inc. is headquartered in Boston, with a satellite office in Portland, Maine.
Rendering of Harrington HealthCare
Oasis Dental Solutions OpensLawrence, MA – Oasis Dental Solutions, located at the Riverwalk Campus at 290 Merrimack St. in Lawrence, recently opened its doors. Interior design firm The Inside View, along with the contractor, The Lupoli Companies, completed the work on the 6,600sf office.
The office was designed to create a pleasing experience for both patients and staff. Features include a fun, contempo-rary color scheme, custom furnishings, and decorative accents including a water feature at the entry to the office. The
historical significance of the surrounding buildings was maintained by incorpo-rating high, open ceilings in the clinical hallways.
Treatment rooms offer flexibility in serving patients of all ages. Using state-of-the-art dental equipment and technology, one of the main features of the practice is the Cerec machine that utilizes 3D X-ray and cone beam technology to provide patients with single visit restorations, implants, and orthodontics.
organizations to harness the creativity and knowledge of diverse groups to create widespread cultural changes in how healthcare is delivered.Integrated Project Delivery Process (IPD)
This is a design and construction delivery process with early collaboration from the owner and design team utilizing a tar-get-value-design process for effective deci-sion-making within one inclusive contract and cost sharing between the owner, design team, and contractor. Baystate Medical Center, working with SBA and Suffolk Construction Company, determined that a traditional design-bid-build process for a four-story fit-out of 96 inpatient beds and pharmacy was not viable based on budget and schedule. Using IPD, the team
completed the south wing fit-out project one month ahead of schedule and over $1 million under budget. IPD is geared to-wards front-end decisions by the owner on critical, time-sensitive materials, resulting in early coordination of documents. This process is a good fit for securing early con-tracts for large infrastructure equipment and reducing changes in the design as the construction proceeds.
By creating a culture of Lean, you have benchmarks for decisions, processes for evaluating change, and opportunities to make improvements based on data. Each Lean Design Event builds on previous successes and becomes a part of your organization’s bigger picture.
Teresa Wilson, AIA, LEED AP, is the principal managing director at Steffian Bradley Architects in Boston.
One Size Does Not Fit Allcontinued from page 16
www.high-profile.com
June 2016 23
Abbott-Boyle, Inc . Tel. 781-646-0460 1 Mott Street Fax 781-648-0396 Arlington, MA 02474 Cell 617-930-1298
Providing quality service since 1971
http://www.abphoto.com
High-Profile Focus: Healthcare Facilities
multitenant building, issues of access and schedule must be addressed with property management. If large groups are accessing secure entrances and elevators simultaneously, it will inevitably impact building security staff, other tenants, and visitors. Some landlords may require a design that supports additional entry/check-in areas dedicated to trainees.
Other alternatives to building dedicated training space may be advantageous for organizations trying to manage the initial capital costs of both a new facility and the procurement of new EHR technology. Short-term rental contracts can be made at training centers, convention sites, and, for smaller hospitals, hotels. Choosing a temporary offsite training location also eliminates the challenge of repurposing a new fit-out space for future uses.
The design of the classroom and adjacent amenities can impact how the training process is perceived by staff. Two important design factors include: 1) right-sizing the classroom to avoid overcrowding and improve visibility to the instructor’s projection screen and 2) designing the HVAC systems to ensure the training rooms are kept at a comfortable temperature for everyone. The latter is especially important if the classroom function is a change in occupancy from the standard business and hospital occupancy to assembly occupancy, impacting the HVAC systems to provide appropriate cooling and ventilation for the occupants
and the computer heat loads.For example, Margulies Perruzzi
Architects recently designed a training center for a major academic medical center, establishing the optimal classroom size at 850sf to 900sf. This was determined by evaluating coursework hours, students, classes per day, space available, total employees trained, and ideal class size. Classrooms were designed for 16 to 20 work stations to achieve a good balance of efficiency and personalized attention. The combination of these factors determines the overall schedule of the training period; a recent client required 12 months to train more than 18,000 employees. MPA also replaced the majority of the HVAC system and provided a new variable air volume (VAV) system for the training center. This upgrade to the existing space provided increased cooling capacity for the change in use, as well as individual temperature controls for adjustment in each classroom.
There are many variables in the design of EHR training centers. The goal should be to create a positive training experience that promotes learning and helps hospitals make this technology transition smoothly, without inflicting more stress and frustration on their employees.
Jason Costello, AIA, EDAC, is an associate principal and partner, and Nathan Turner, AIA, LEED AP, is an associate partner and senior project manager at Margulies Perruzzi Architects.
Designing Electronic Health Records Sitescontinued from page 13
Sometimes selecting to renovate exist-ing space over adding a new building can meet the needs of the healthcare facility. The decision is based on a multitude of considerations such as adaptability of existing space and savings in time and/or money. Reconfiguring space can allow for less-used facilities to provide much-need-ed use of more revenue-generating programs, and also typically allows for upgrades to equipment as needed, keep-ing all materials at state-of-the-art levels.
Placement of functions is an important consideration in healthcare design. For example, imaging departments can consider separate areas for ambulatory patients and in-patients waiting for testing. It is important that adjacencies of patient, staff, and material flows always provide for efficient use of time for patients and staff. Clinics that offer multiple services in the same area also help to reduce patient travel time and stress.
Similarly, placement of crucial areas of operation can greatly enhance several outcomes at once. For example, selecting a panoptical layout of a central nurses’ station can allow for oversight of the waiting room, changing room, pre- and
post-operative bays, and the restricted sterile core, allowing healthcare providers better vision to anticipate any issues or problems. Expanding well-used work areas also typically leads to improved staff productivity.
Aesthetic decisions are also important. Selecting finishes that exude a comfortable and welcoming feel may positively impact patients and providers alike. Using glass whenever possible to bring natural light into a space also promotes a sense of welcome and well-being. Healthcare environments that incorporate some of the comforting environs more commonly found in spas can be transformed into serene spaces that augment treatmentoutcomes, especially in outpatient cancer treatment centers.
Enhancing the quality of the care experience, along with providing staff and operational efficiencies, is the foundation of a proper design process for healthcare. Healthcare design can offer thoughtful care environments that provide improved efficiency and productivity for staff members as well as overall wellness for patients and providers.
Anthony Cavallaro is the CEO of JACA Architects in Boston.
Design for Patients and Providerscontinued from page 9
www.high-profile.com
June 201624
617.269.7200www.marrscaffolding.com
Sectional Frame I Systems Scaffold
Tube & Clamp I Rolling Towers
Suspended Scaffold
Scaffold Enclosures I Debris Chutes
Pedestrian Protection
Mast Climbing Work Platforms
Cranes and Rigging
SCAFFOLD Installation & D
ismantling Services
En
gine
erin
g · De
sign · In
stallation · D
isman
tle
EducationNECA Contractors Work at MIT
Cambridge, MA – LAN-TEL Communications, headquartered in Norwood, provided tel/data system installations at the historic, eight-story MIT Sloan Building facility. The NECA low-voltage specialty contractor’s scope consisted of installing the building’s wireless access network as well as providing the copper and fiber cable backbone and category 6A cable infrastructure to support the MIT facility’s tel/data requirements.
LAN-TEL PM Neil Gillis and foreman Joe Morris supervised a crew of eight Local 103 technicians in the complex
two-year cabling fit-out of the building, which was originally constructed in 1938.
NECA contractor J.M. Electrical Co., Inc. of Lynnfield provided electrical installations for the historic building’s advanced Siemens building automation control systems. The scope included wiring and integration of the building’s zoned chilled beams; an in-slab radiant, heating system; advanced floor static pressure control; and 450 individually controlled HVAC zones.
J.M. managed a crew of six Local 103 electricians during the 18-month project.
MIT Sloan Building
NECTF 2015 Apprentice Graduates
Boston – The New England Carpenters Training Fund recently hosted a graduation ceremony for the 2015 apprenticeship program graduates. Representing 19 locals, 116 members completed their training in the apprenticeship program in 2015.
The four-year apprenticeship program, administered by representatives of labor and management, consists of classroom instruction, shop training, and completion of minimum work hours with union contractors and subcontractors.
Five members were recognized with awards given out at the ceremony. Local 424 member Richard Rose (carpentry), Local 94 member Corey Smith (floor covering), and Local 56 member Cristian
Clement (pile driving) each received the Golden Hammer Award. This award is given out each year to one member of each of the trades represented in that year’s graduating class. It is awarded to the graduate who has demonstrated outstanding craftsmanship and dedication to the profession.
Local 111 member Jess Vigeant received the Zachary Constant Award, recognizing the graduating apprentice who displays an all-around commitment to the craft, the union, and the community.
Local 2168 member Victor Gonzalez was the recipient of the Alfred Halpern Leadership Award, recognizing the graduate who displays exceptional proficiency and professionalism.
Union carpenters graduate to journey level. / © NERCC
With offices in Sandy Hook, Connecticut; Boston; and New York City, Caldwell & Walsh has distinguished itself as a premier construction company in the Northeast, specializing in healthcare, laboratory, and education market segments. Surmounting even the most demanding of construction challenges, the staff is driven to meet project goals
and ease the transition from completion to operations. This service results in many valued relationships with distinguished clients and design teams.
Sharon Apotheker Pomeroy is marketing director and assistant to the president at Caldwell & Walsh Building Construction, Inc.
Caldwell & Walsh Completes First CLEANSUITEcontinued from page 15
Hybrid operating room at New York University Langone Medical Center
www.high-profile.com
June 2016 25
Eastern Conn. State Ribbon Cutting
Glastonbury, CT – Eastern Connecticut State University held a ribbon-cutting ceremony in April to mark the opening of its new 118,000sf Fine Arts Instructional Center, designed by Glastonbury-based The S/L/A/M Collaborative (SLAM), in collaboration with William Rawn & Associates of Boston.
Robert Pulito, AIA, SLAM president and principal-in-charge on the project, spoke at the event remarking on the time, effort, and emotional investment of the hundreds of people who made the new
fine arts center possible.The new $62 million facility combines
teaching, performance, and exhibit space for the Performing Arts Department’s music and theater programs, as well as exhibition and studio spaces for the Art and Art History Department. The center also features several general purpose classrooms. The building’s three performance venues include a 400-seat concert hall/auditorium, a 250-seat proscenium theatre and a flexible 125-seat studio/black box theater.
Eastern Connecticut State University’s new Fine Arts Instructional Center / photo: The S/L/A/M Collaborative
Regis Opens Renovated Science Lab
Weston, MA – Regis President Antoinette Hays, PhD, RN, was joined by Travis Mc-Cready, president and CEO of the Mas-sachusetts Life Sciences Center (MLSC), and other federal, state, and local officials to mark the opening of the university’s newly renovated 826sf science laboratory.
The renovated space and scientific equipment is the result of a $355,000 MLSC capital grant awarded to Regis in 2015.
Regis also has invested in state-of-the-art scientific equipment to support biology and biochemistry studies, including a vertical laminar flow hood, a minus-86-degree freezer, inverted phase contrast microscope, a glass still for purified water, centrifuges, and a Countess II cell counter – all of which will advance student tissue
culture training and research.“Regis College’s newest life sciences
training facility embodies the common-wealth’s ability to leverage its talent and resources to bring game-changing technology to fruition, grow our economy, and create jobs,” said Governor Charlie Baker.
“This is an exciting day for Regis, as our newly renovated science laboratory and equipment represent important stra-tegic investments in our future. We are focused on accelerating STEM learning to help more students fully participate in today’s innovation economy,” said Hays, “We are very appreciative to Travis McCready and the Massachusetts Life Sciences Center for their tremendous support.”
Antoinette Hays and Travis McCready cut the ribbon.
High-Profile: Education
C
M
Y
CM
MY
CY
CMY
K
myCADD-High-Profile-Ad.pdf 1 5/19/16 1:37 PM
From a Client's Point of View
Call us today or visit our website integratedbuilders.com
302 Weymouth Street, Suite 203, Rockland, MA 02370 | Ph: (781)421-2003 | integratedbuilders.com
TOGETHERWE SEE CLEARLY.
www.high-profile.com
June 201626 High-Profile: Education
UMass Amherst Building Under WayDesigned by Leers Weinzapfel Associates, Suffolk CM
Amherst, MA – Bringing together the previously dispersed departments of landscape architecture, architecture, and building technology programs, the new Design Building at the University of Massachusetts campus in Amherst will be a dynamic space of exchange, collaboration, and experiment, celebrating a shared commitment to sustainability.
The building is targeted for LEED Gold certification and is scheduled for completion in 2017, according to Suffolk Construction, the construction manager.
The Timber Design Building functions as a hinge between the formal 1975 Haigis Mall created by Kevin Roche, and the informal and intimate space of historic Stockbridge Way. The building serves as a pathway down the hill through the campus between the two precincts.
To create a center space of collaboration, a coiling and rising band of studios, faculty offices, and classrooms surrounds a skylit commons for gathering and presentations. Above the commons, studios and offices embrace a contemplative green-roof terrace, outdoor classroom, and experimental growing space for the landscape department.
The slope of the site creates a tall four-story façade on the downhill side facing the mall inviting the community into the building. On the uphill side, a three-story façade fits comfortably among the smaller historic buildings.
The building’s multidisciplinary program is organized around an interior courtyard of exposed timber and an
exterior landscaped courtyard and outdoor classroom. With a glue-laminated wood frame, floor slabs of composite, exposed cross-laminate timber (CLT) plank, and cast-in- place concrete, the building will be a demonstration of leading-edge timber engineering, a concept informed by the school’s current research in building technology.
Rendering © Leers Weinzapfel Associates
Rendering © Leers Weinzapfel Associates
Walsh Brothers Finishes School EarlyBoston – Back to school came early for the city of Lynn as Walsh Brothers, Incorporated turned over the new, 182,000sf Thurgood Marshall Middle School two months ahead of schedule.
The project was successfully completed in collaboration with the Mass. School Building Authority (MSBA), the city of Lynn, Joslin Lesser + Associates/NV5, and architect Raymond Design
Associates.This four-story building on Brookline
Street houses 1,100 students in sixth through eighth grades. The new school features brick masonry and a glass front designed around a central entranceway. There are two wings housing classrooms and science labs. A gym and café share a mutual stage and can be used as an auditorium.
A high-performance metal-clad building envelope will be incorporated, together with a coursed ashlar base of local bluestone integrated with a landscape that makes extensive use of native plants and paving materials. The project is intended to demonstrate the latest sustainable design practices and serve as a model for the integration of campus landscape and architecture.
Construction underway
WE BEGIN WITH GROUNDBREAKING IDEAS BEFORE WE EVEN BREAK GROUND.We’re all about a new brand of thinking, fearless innovation and proactive problem solving. About using state-of-the-art modeling tools and lean processes to plan, collaborate, and deliver results for our clients. We’re Suffolk Construction, and we build smart.
suffolk.com
www.high-profile.com
June 2016 27
POWERING THE FUTURE FOR LIFE SCIENCE, BIOTECHNOLOGY AND HEALTHCARE
IN EASTERN NEW ENGLAND.NECA and Local 103 set the standard for excellence in electrical and
telecom construction of biotechnology and healthcare projects throughout Eastern New England.
As we light the way for innovations in life science,
biotechnology, and healthcare, the professional
electrical contractors of NECA Boston Chapter and
skilled electricians and technicians of IBEW Local
103 power our energy-efficient, technology-driven
facilities with electrical and telecommunications
construction that is unsurpassed in quality. All with
critical attention to on-time, on-budget delivery.
Rely on the power of quality electrical and
tel/data work. For a complete directory of NECA
Greater Boston Chapter contractors, visit us at
www.bostonneca.org or call 877-NECA-IBEW.
Lighting the way for biotechnology and healthcare facilities.
Dana-Farber, Yawkey Center for Cancer Care, Boston One Hampshire at Kendall Square, Cambridge Longwood Center, Boston
Center for Life Science | Boston Ironwood Pharmaceuticals, Cambridge Brigham & Women’s Hospital, Boston
www.the103advantage.com (877)NECA-IBEW (632-2423) www.bostonneca.org
Rend
erin
g: E
lkus M
anfre
di A
rchi
tect
s
www.high-profile.com
June 201628
Seabury, An Active Life Plan Community, Bloomfield, CTPlans for the active life community in Bloomfield encompass a major expansion of Seabury’s residential offerings and community functions.
KBE is serving as Construction Manager at Risk for Phases B and C of the $51-million expansion project. Construction commenced on May 16, 2016. The new 68 independent living apartments and the enhanced Health Center will open in the fall of 2017, which will be followed by renovations of existing assisted living and skilled nursing areas including the addition of new dining facilities. KBE will be working alongside architect SFCS on the Seabury project. KBE completed the $50-million Whitney Center Continuing Care Retirement Community in Hamden, CT with SFCS in the fall of 2011.
Among various other amenities, plans for the Seabury campus include new independent living and assisted living units, as well as skilled nursing units, new fitness center outdoor courtyard, and a chapel/auditorium with seating for 225.
“Creating a sense of home is an important part of the concept for senior living facilities,” said Mike Kolakowski, President and CEO of KBE Building Corporation. “Being
Shaping the face of senior livingIt was a little over a year ago that an emotional topping-out ceremony elicited chills and hushed reverence in onlookers as the final steel beam was put in place on the new $78-million Jewish Senior Services building in Bridgeport, CT.
Prior to being crane-lifted into place, that climactic piece of metal had been autographed by hundreds of well-wishers, including members of the KBE Building Corporation team that orchestrated its arrival, as well as senior residents of the Jewish Home in neighboring Fairfield who anxiously awaited their miraculous new living space.
Now, in just a few short months, seniors will be calling the Jewish Senior Services building “home.”
Jewish Senior Services, the Harry and Jeanette Weinberg Campus, Bridgeport, CTThis 372,000-square-foot building holds the distinction of being the first “Household Model” of senior care in Connecticut, replete with private bedrooms and baths for residents, as well as state-of-the-art shared living areas. Working in concert with architect Perkins Eastman, KBE and the building team have brought this new senior living concept to life.
Seniors prepare to settle in with help from KBE Building Corporation
For KBE, however, the lauded Jewish Senior Services (JSS) project is yet one more example of how the commercial construction company has made indelible strides in shaping the face of healthcare by making it feel more like home. The firm has been actively constructing senior living facilities throughout the Northeast and the Mid-Atlantic.
All of the comforts… In many ways, for the seniors that will ultimately fill their halls, the new buildings constructed by KBE Building Corp. provide a place for renewal.
Brandywine Living, Litchfield, CTLook no further than Brandywine Living at Litchfield, CT. The assisted living facility celebrated its grand re-opening in late 2015, courtesy of KBE and architect Meyer Design.
Here, 7,000 square feet of renovations yielded a new wellness center, beauty salon and a state-of-the-art audio-visual theater. Even the bar received a high-end, English pub-style makeover, boasting custom cabinets, granite countertops, and copper tin acoustical ceilings. A two-story, 23,000-square-foot addition provides assisted living and dementia care on the first floor, and independent living units on the second floor.
Their Journey Home
The Landing at Farmington — Front View // Credit: Paul Burk Photography
www.high-profile.com
June 2016 29
SEABURY, AN ACTIVE LIFE PLAN COMMUNITY // BLOOMFIELD, CT // PHASE B
• 68 new independent living apartments in a three-story structure with one level of underground parking providing 71 spaces;
• A new fitness and aerobics center, nine meeting rooms, support and storage areas, and an outdoor terrace contiguous with chapel/auditorium;
• A new chapel/auditorium to seat approximately 225, to be constructed at the south side of campus and connect to the existing commons space;
• Sitework and surface parking on the west and east sides of the campus; access road section to the east of the existing Community, and reconfigured wetlands mitigation areas and trails.
SEABURY, AN ACTIVE LIFE PLAN COMMUNITY // BLOOMFIELD, CT // PHASE C
• New three-story building addition with 21 new private skilled nursing units (net 12 beds) and 14 assisted living units (no net increase);
• New offices and therapy suite spaces;
• Renovations to existing Seabury Health Center to reconfigure nine skilled nursing units and 14 assisted living units into new kitchens, dining rooms, and activity areas for each level of care.
JEWISH SENIOR SERVICES, THE HARRY AND JEANETTE WEINBERG CAMPUS // BRIDGEPORT, CT
• $78 million, 372,000 s/f project with completion expected in June 2016
• First “Household Model” of senior care in the State of Connecticut
• 18 assisted living units (1-bedroom and studios)
• 280 total beds in 20 skilled nursing households with 14 private bedrooms each
• 2 short-term rehabilitation households with 14 private bedrooms and bathrooms and indoor and courtyard therapy centers
• To be complete in June 2016
BRANDYWINE LIVING AT LITCHFIELD // LITCHFIELD, CT
• $7.7 million project
• 23,000 s/f addition, 7,000 s/f renovation
• Shingle roof with cementitious plank siding, structural steel with light gauge metal framing and steel joists for the second floor, with concrete slab, light gauge roof trusses
• Extensive wood trim, wainscoting, two fireplaces, vaulted ceiling wood beam and wood plank ceiling very high end finishes
• Colonial architecture
• 43 surface parking spaces, sidewalks, site lighting
• Completion date: November 2015
THE LANDING AT FARMINGTON // FARMINGTON, CT
• Two story, metal framed, slab-on-grade, 95,000 sf building
• The facility is set on a 9.7 acre site and includes vehicle parking for 69 cars
• 142 beds, a commercial grade kitchen, dining halls, exercise room, nurse/medical rooms, café, lounge, and media rooms
• Interior finishes consist of residential grade carpet, drywall, and vinyl flooring
• Completed: September 2015
PROJECT PROFILES:
Seabury, An Active Life Plan Community, Bloomfield, CTPlans for the active life community in Bloomfield encompass a major expansion of Seabury’s residential offerings and community functions.
KBE is serving as Construction Manager at Risk for Phases B and C of the $51-million expansion project. Construction commenced on May 16, 2016. The new 68 independent living apartments and the enhanced Health Center will open in the fall of 2017, which will be followed by renovations of existing assisted living and skilled nursing areas including the addition of new dining facilities. KBE will be working alongside architect SFCS on the Seabury project. KBE completed the $50-million Whitney Center Continuing Care Retirement Community in Hamden, CT with SFCS in the fall of 2011.
Among various other amenities, plans for the Seabury campus include new independent living and assisted living units, as well as skilled nursing units, new fitness center outdoor courtyard, and a chapel/auditorium with seating for 225.
“Creating a sense of home is an important part of the concept for senior living facilities,” said Mike Kolakowski, President and CEO of KBE Building Corporation. “Being
Credit: Don Couture Aerial Photos
Credit: Paul Burk Photography
Credit: Paul Burk Photography
Credit: SFCS Architects
Credit: SFCS Architects
able to construct these environments that support our senior population adds another level of satisfaction to our work.”
Respecting - not restricting - your seniorsAt a new assisted living facility in Greece, NY, multiple efforts have been taken to help future residents feel perfectly at home. The Greece facility is a $14.3-million mirror image of The Landing at Farmington (CT), which KBE constructed in 2015. The new two-story building is strategically placed in a residential area to promote a sense of warmth and welcoming with incoming seniors. Both the Greece and Farmington residential communities rely on traditional home architectural elements, further fostering the warm and welcoming environment.
“Communication is the key in any construction project,” said Senior Project Manager Ross Mezzanotte, who is leading the Seabury expansion project. “We approach these projects with the attitude that we are working in someone’s home – which we are – and that means we need to take extra care to be respectful of people’s space and privacy.”
When working in close quarters with an aged population, in particular, communication and compassion informs every aspect of the job.
Just ask the crew of Brandywine Living at Litchfield, who, in order to complete the two-story, 4,000-square-foot dining addition, were responsible for demolishing and renovating a portion of an already inhabited building.
“The biggest challenge was the demolition for the two-story dining addition, where we had to take down part of the existing building,” KBE project manager Robert Leo said. “There were major challenges performing all that interior renovation work, and working around an elderly population in what is essentially their home.”
A key issue for working in any occupied senior living facility is to ensure that residents can enjoy “life as usual” with little or no impact on their daily lives and sense of comfort. Achieving that necessitated careful planning on the part of the KBE team, both to ensure that residents were kept comfortable as well as to ensure the safety of residents and staff as well as the construction team. Four distinct phases were scheduled and color-coded. This kept residents and Brandywine staff fully informed of all upcoming construction activities. This in turn enabled them to plan their days accordingly and to be prepared for the minor inconveniences that come with living in a construction site.
Built to last – for generations Back in Bridgeport, when the doors swing wide on Jewish Senior Services this summer, it will welcome both the young and the old.
4200 Park Ave is the former site of the Jewish Community Center so anticipation is building as fond memories abound amongst the JSS community. In addition to the center’s continued care for seniors, the intergenerational campus will offer an 18,000 square foot fitness center, a four-lane indoor swimming pool, a child care center, and much more – all for the use of families. A true homecoming for the community.
“The thought of several generations coming together in a new building is exciting for all of us who grew up there and have great memories with friends and family,” said Andrew H. Banoff, President and CEO of Jewish Senior Services.
Perhaps that’s what makes the work of the KBE Building Corporation so lasting: the understanding that no matter how old you are or become, you can always go home again.
SEABURY, AN ACTIVE LIFE PLAN COMMUNITY // BLOOMFIELD, CT // PHASE B
• 68 new independent living apartments in a three-story structure with one level of underground parking providing 71 spaces;
• A new fitness and aerobics center, nine meeting rooms, support and storage areas, and an outdoor terrace contiguous with chapel/auditorium;
• A new chapel/auditorium to seat approximately 225, to be constructed at the south side of campus and connect to the existing commons space;
• Sitework and surface parking on the west and east sides of the campus; access road section to the east of the existing Community, and reconfigured wetlands mitigation areas and trails.
SEABURY, AN ACTIVE LIFE PLAN COMMUNITY // BLOOMFIELD, CT // PHASE C
• New three-story building addition with 21 new private skilled nursing units (net 12 beds) and 14 assisted living units (no net increase);
• New offices and therapy suite spaces;
• Renovations to existing Seabury Health Center to reconfigure nine skilled nursing units and 14 assisted living units into new kitchens, dining rooms, and activity areas for each level of care.
JEWISH SENIOR SERVICES, THE HARRY AND JEANETTE WEINBERG CAMPUS // BRIDGEPORT, CT
• $78 million, 372,000 s/f project with completion expected in June 2016
• First “Household Model” of senior care in the State of Connecticut
• 18 assisted living units (1-bedroom and studios)
• 280 total beds in 20 skilled nursing households with 14 private bedrooms each
• 2 short-term rehabilitation households with 14 private bedrooms and bathrooms and indoor and courtyard therapy centers
• To be complete in June 2016
BRANDYWINE LIVING AT LITCHFIELD // LITCHFIELD, CT
• $7.7 million project
• 23,000 s/f addition, 7,000 s/f renovation
• Shingle roof with cementitious plank siding, structural steel with light gauge metal framing and steel joists for the second floor, with concrete slab, light gauge roof trusses
• Extensive wood trim, wainscoting, two fireplaces, vaulted ceiling wood beam and wood plank ceiling very high end finishes
• Colonial architecture
• 43 surface parking spaces, sidewalks, site lighting
• Completion date: November 2015
THE LANDING AT FARMINGTON // FARMINGTON, CT
• Two story, metal framed, slab-on-grade, 95,000 sf building
• The facility is set on a 9.7 acre site and includes vehicle parking for 69 cars
• 142 beds, a commercial grade kitchen, dining halls, exercise room, nurse/medical rooms, café, lounge, and media rooms
• Interior finishes consist of residential grade carpet, drywall, and vinyl flooring
• Completed: September 2015
PROJECT PROFILES:
Seabury, An Active Life Plan Community, Bloomfield, CTPlans for the active life community in Bloomfield encompass a major expansion of Seabury’s residential offerings and community functions.
KBE is serving as Construction Manager at Risk for Phases B and C of the $51-million expansion project. Construction commenced on May 16, 2016. The new 68 independent living apartments and the enhanced Health Center will open in the fall of 2017, which will be followed by renovations of existing assisted living and skilled nursing areas including the addition of new dining facilities. KBE will be working alongside architect SFCS on the Seabury project. KBE completed the $50-million Whitney Center Continuing Care Retirement Community in Hamden, CT with SFCS in the fall of 2011.
Among various other amenities, plans for the Seabury campus include new independent living and assisted living units, as well as skilled nursing units, new fitness center outdoor courtyard, and a chapel/auditorium with seating for 225.
“Creating a sense of home is an important part of the concept for senior living facilities,” said Mike Kolakowski, President and CEO of KBE Building Corporation. “Being
Credit: Don Couture Aerial Photos
Credit: Paul Burk Photography
Credit: Paul Burk Photography
Credit: SFCS Architects
Credit: SFCS Architects
able to construct these environments that support our senior population adds another level of satisfaction to our work.”
Respecting - not restricting - your seniorsAt a new assisted living facility in Greece, NY, multiple efforts have been taken to help future residents feel perfectly at home. The Greece facility is a $14.3-million mirror image of The Landing at Farmington (CT), which KBE constructed in 2015. The new two-story building is strategically placed in a residential area to promote a sense of warmth and welcoming with incoming seniors. Both the Greece and Farmington residential communities rely on traditional home architectural elements, further fostering the warm and welcoming environment.
“Communication is the key in any construction project,” said Senior Project Manager Ross Mezzanotte, who is leading the Seabury expansion project. “We approach these projects with the attitude that we are working in someone’s home – which we are – and that means we need to take extra care to be respectful of people’s space and privacy.”
When working in close quarters with an aged population, in particular, communication and compassion informs every aspect of the job.
Just ask the crew of Brandywine Living at Litchfield, who, in order to complete the two-story, 4,000-square-foot dining addition, were responsible for demolishing and renovating a portion of an already inhabited building.
“The biggest challenge was the demolition for the two-story dining addition, where we had to take down part of the existing building,” KBE project manager Robert Leo said. “There were major challenges performing all that interior renovation work, and working around an elderly population in what is essentially their home.”
A key issue for working in any occupied senior living facility is to ensure that residents can enjoy “life as usual” with little or no impact on their daily lives and sense of comfort. Achieving that necessitated careful planning on the part of the KBE team, both to ensure that residents were kept comfortable as well as to ensure the safety of residents and staff as well as the construction team. Four distinct phases were scheduled and color-coded. This kept residents and Brandywine staff fully informed of all upcoming construction activities. This in turn enabled them to plan their days accordingly and to be prepared for the minor inconveniences that come with living in a construction site.
Built to last – for generations Back in Bridgeport, when the doors swing wide on Jewish Senior Services this summer, it will welcome both the young and the old.
4200 Park Ave is the former site of the Jewish Community Center so anticipation is building as fond memories abound amongst the JSS community. In addition to the center’s continued care for seniors, the intergenerational campus will offer an 18,000 square foot fitness center, a four-lane indoor swimming pool, a child care center, and much more – all for the use of families. A true homecoming for the community.
“The thought of several generations coming together in a new building is exciting for all of us who grew up there and have great memories with friends and family,” said Andrew H. Banoff, President and CEO of Jewish Senior Services.
Perhaps that’s what makes the work of the KBE Building Corporation so lasting: the understanding that no matter how old you are or become, you can always go home again.
www.high-profile.com
June 201630
ConnecticutAmenta Emma Honored with IIDA NE Award for RMACT
Norwalk, CT – Amenta Emma Architects of Stamford recently received an IIDA New England 2016 Design Award for Best Healthcare Design. Built in 2015, Reproductive Medicine Associates of CT is one of the leading fertility centers in the country. Its new location in Norwalk at IPark is the newest of four offices. The 20,635sf space includes a comfortable and spacious reception area, exam and HC6_RMA Photos6treatment rooms,
recovery areas, consultation rooms, education rooms, as well as administrative and doctors’ offices.
The general contractor for the center was ESRT Construction Company.
The center also includes an in vitro fertilization (IVF) laboratory, one of just 16 leading IVF centers nationwide chosen by In Vitro Sciences to participate in its Centers of Excellence Program.HC6_RMA Photos5 HC6_RMA Photos4
The major design goal was to create a relaxing environment for patients through the use of soothing colors, soft forms, and floral wallcoverings. Another goal was to provide spaces for additional support services, including nutrition classes and support groups, as well as acupuncture and fertility counseling. Privacy and flexibility were attained by use of folding doors, sliding doors, and wall panels.
Reception/waiting room designed to create a welcoming and relaxing environment PACU with soothing colors and floral wall coverings.
Exam Room
SUPPORT IS OUR STRENGTH
WWW.UNITEDSTEEL.COMUNITED STEEL164 SCHOOL STREETEAST HARTFORD, CT 06108 • 860.289.2323
An Af�rmative Action/Equal Opportunity Employer
EXPERIENCESEXTRAORDINARYEXPERIENCESEXTRAORDINARYFor 40 years United Steel has been fabricating and erecting structures throughout New England. Our portfolio includes projects that have enhanced educations, healed the sick, advanced commerce and provided shelter. United Steel's expertise delivers - and will continue to provide - extraordinary experiences.
www.high-profile.com
June 2016 31
Olenick 2016 Women in Biz HonoreeGlastonbury, CT – Mary Jo Olenick, AIA, principal, chief marketing officer, and member of the board of directors of The S/L/A/M Collaborative (SLAM) has been named a 2016 Women in Business honoree at the 14th annual Women in Business Luncheon.
Through an annual Women in Business awards program, the Hartford Business Journal recognizes strong and remarkable business women in leadership roles throughout central Connecticut who have mastered their industries and are admired in the community. These women are later honored at the luncheon.
Olenick is dedicated to programming, planning, and design for national
colleges, universities, and academic medical centers. She has spent most of her career at SLAM, with more than 30 years of experience, first working as a project architect and project manager and eventually specializing in programming.
Mary Jo Olenick, AIA, of The S/L/A/M Collaborative (lower left)
with the 2016 Women in Business honoreesBrad Huff
Christopher Nardi
Adam Gower
Amanda Cleveland
BVH Promotes TwoBloomfield, CT – BVH Integrated Ser-vices recently promoted two engineering professionals within its Bloomfield, Conn., office. Brad Huff, P.E., has re-ceived the title of senior engineer, and Adam Gower, P.E., has been promoted to commissioning project manager.
Huff has worked with BVH for eight years, starting as an intern in 2008 and joining as a full-time staff member in 2010. He is currently working on the Hale YMCA Youth & Family Center in Put-nam and the schematic design of UConn’s new Student Recreation Center.
Gower is a mechanical engineer who has been with BVH since 2012, and joined the firm’s commissioning department in
2014. His recent commissioning work includes the Day Kimball Hospital Emer-gency Department renovation in Putman and the retrocommissioning of laboratory facilities for both the State of Connecticut Department of Energy and Environmen-tal Protection and the Department of Consumer Protection in Hartford.
S/P+A Adds Two AssociatesHamden, CT – Silver, Petrucelli & As-sociates (S/P+A) announced that Chris-topher T. Nardi, AIA, project architect, and Amanda M. Cleveland, NCIDQ, registered interior designer, have been named associates of the firm.
Nardi has worked at S/P+A for over seven years, starting out as an architectural intern. His experience at the company has helped him develop expertise and lead-ership for a wide range of projects, in all project phases, from programming and de-sign, through construction administration.
Interior design services were brought in-house just over seven years ago when
Cleveland joined the firm. Today, she men-tors a full-time staff of four . Cleveland is a registered interior designer in Connecti-cut and active in IIDA, the professional association for interior designers.
Wunch Joins Elite ProgramBloomfield, CT – BVH Integrated Services announced that BIM manager Matt Wunch has been selected to join the Autodesk Expert Elite Program for his knowledge and expertise in the use of InfraWorks 360.
Autodesk’s Expert Elite Program recognizes individual members who have made extraordinary contributions with helping the community by sharing knowledge,
providing leadership, and exemplifying an engaging style of collaboration that drives a healthy and valuable Autodesk community.
“The goal of the Expert Elite program is to empower our super-users to better share their knowledge, assist their peers, and support the Autodesk
community,” said Katinka Sante, Expert Elite Program manager for Autodesk
Matt Wunch
High-Profile: Connecticut
Atlanta GA | Boston MA | Glastonbury CT | Syracuse NY 860 657.8077 www.slamcoll.com
UMass Memorial Cancer Center at Marlborough Hospital 2014 BSA Healthcare Facilities Design Winner
Danbury Hospital Peter And Carmen Lucia Buck Pavilion
ARCHITECTURE PLANNING INTERIOR ARCHITECTURE LANDSCAPE ARCHITECTURE STRUCTURAL ENGINEERING CONSTRUCTION SERVICES
est.19
76years
Building Success Through Performance.
CONSTRUCTION MANAGERS AND GENERAL CONTRACTORS SINCE 1942
www.accgc.com1010 Wethersfi eld Ave. | Suite 304, Hartford,Connecticut 06114 | 860.296.4114
COMMITTED TO SUSTAINABLE CONSTRUCTION PRACTICES
www.high-profile.com
June 201632 High-Profile: Connecticut
Stamford Hospital & Skanska USA Collaborate on New Patient-Centered Facility
Stamford, CT - The process of renovating and expanding Stamford Hospital epitomizes Stamford Health’s values of patient-centered design and collaboration with its patients, employees, design and construction partners, and the surrounding community. Stamford Health’s goal is to provide state-of-the-art healthcare in a patient-centered environment, a task its teams accomplished by “continuously reminding ourselves to walk in our patients’ shoes.”
The work involved the construction of a new, 12-story building that replaced a number of existing facilities, some of
which dated back to the early 1900s. In de-signing the new hospital, Stamford Health incorporated the Planetree philosophy of patient-centered care – ensuring that all elements of care and overall design were approached with the goal of treating the entire person: mind, body, and spirit. From its inception, the hospital renovation and expansion took a collaborative approach. Stamford Health made it a priority to collaborate closely with its neighboring communities in planning the new campus. The result was a more sustainable design. The final hospital would have the green building components to meet the require-
ments for LEED certification. Its new central utility plant is designed for both energy generation and conservation.
The executive leader for the $450M New Hospital Building at Stamford Hospital and the Master Plan for further hospital development is Stamford Health’s Stan Hunter. For his work on Stamford Hospital, Hunter was the recipient of 2015 Association of General Contractor’s of Connecticut “Owner of the Year” Award. Hunter needed a strong, collaborative relationship with an experienced general contractor to achieve the hospital’s goals. He found the perfect partner in Mark Miller, account manager and project director for Skanska USA Building. Miller has more than 25 years of construction expertise and a history of successful project completion spanning a wide range of industries, including healthcare, research, hospitality, municipal, higher education, and office construction. Miller is a licensed professional engineer and certified general contractor, as well as a LEED Accredited Professional.
Together, Hunter and Miller worked with the latest technologies, including Building Information Modeling (BIM), to create a building designed to respond to the needs of its users, from patients and doctors to nurses, other hospital staff, and those responsible for maintaining the complex facility after construction is complete and welcomes its first patients.
On the facilities side, Skanska used BIM modeling of the equipment and MEP (Mechanical, Electrical, and Plumbing) systems to coordinate work on the new central utility plant. During early review of the design with facilities staff, Skanska found that relocating some variable-frequency drives (VFDs) would improve access for maintenance – and that was just one example of how the team identified ways to drive a more efficient, cost-effective maintenance process.
In addition to planning the project infrastructure, BIM technology was used to ensure that medical and patient imaging equipment was precisely
coordinated to meet manufacturer’s site specific requirements and all patient care needs. The medical equipment packages for the Operatories, Cath Labs, ICU and Emergency Department procedure rooms are extremely complicated and extensive. Every equipment support, back box, conduit run, light fixture, and diffuser must be carefully planned in placement and constructed in the proper sequence to achieve success in delivering the patient care space. BIM techniques allowed the team to plan efficiently and most cost effectively, well in advance of deploying installation labor to the field.
Through technology, hospital staff were given the benefits of a virtual walk-through and were able to give input into an improved patient design. Skanska also built full-scale mockups of the patient rooms and treatment spaces to further collaborate with hospital staff on design. The result of the collaboration between the teams, under the leadership of Hunter and Miller, is a facility that is sustainable and designed with state-of-the-art equipment and spaces that work for the patient and the team caring for them.
The new Stamford Hospital was designed by the Texas based firm, WHR Architects, and is scheduled to open in September 2016.
Rendering of Stamford Hospital’s new Patient-Centered Facility / courtesy of WHR Architects Rendering of cardiovascular operating room / courtesy of WHR Architects
LEVEL 1, OR
LEVEL 2, CATH LAB
Rendering of catheterization lab / courtesy of WHR Architects
www.high-profile.com
June 2016 33
MunicipalEckman Under Way at Milton Fire
Milton, NH – Sitework has begun and building construction will soon begin on a new state-of-the-art, 9,000sf fire and rescue station in Milton.
The new facility, which is being built by Eckman Construction of Bedford, will replace the outdated 65-year-old current station and provide a safer, more functional space for Milton’s Fire and Rescue teams.
Cowan-Goudreau Architects of Concord designed the project.
The facility will include four apparatus
bays and is designed to accommodate full-time staff with living quarters to meet the future growing needs of the department.
Excavation for Fire Suppression Cistern at the Site of the new Milton Fire and Rescue Station
New Milton Fire and Rescue Station by Cowan / rendering by Goudreau Architects of Concord
J.M. Elec. Completes Museum ProjectBoston – J.M. Electrical Company, Inc. has completed energy renovation projects at Boston’s Museum of Science. J.M. Electrical performed mechanical upgrades throughout the building and installed a new system for the recently opened Yawkey Gallery on the Charles River.
“Boston’s Museum of Science plays a leading role in educating and informing the public of the crossroads of technology and nature,” said Paul Guarracino, president at J.M. Electrical Company.
Yawkey Gallery, lobby, and concourse now have state-of-the-art lighting, fire alarm, power, and controls. In addition to internal system renovations, J.M. Electrical installed the backbone networks associated with new digital screens located in the Charles River Gallery and concourse as well as the relocation of the fire alarm annunciator to the new information desk in the lobby.
In addition, the firm is powering new, innovative hand-stampers adjacent to the exits patented by the Museum of Science.
“The additions and installations made by our team of expert staff will create a higher level of efficiency and quality service for visitors attending the Museum,” said Niall Black, project manager for J.M.
“As an organization that stands at the
Museum of Science / Yawkey Gallery photo
same crossroads – providing technology that makes systems more efficient and helps to protect our environment by conserving energy – we are grateful for the opportunity to work with this great institution,” said Guarracino
ubcontractors Work Hard.ubcontractors S You deserve a trade association that works equally as hard.
“In Massachusetts, there is no other organization like ASM when it comes to informing subcontractors, and protecting our rights. I can truly say it is the best organization for our company and has been a key to our success.”
– David G. Cannistraro, JC Cannistraro,
ASM Past President
Connect to best-in-class subcontractors and leading general contractors
Have an infl uential voice on laws, regulations, and tax issues that directly aff ect your bottom line
Learn from the best at our seminars, networking events, and safety roundtables
Gain access to our Acadia Insurance program, which has returned over $4 million in dividends
Benefi t from all we off er to help build your business!
Protect your success: Join ASM Today!!Learn more at www.associatedsubs.com or call 617-742-3412.
www.high-profile.com
June 201634
Northern New EnglandStebbins Family Honored
Manchester, NH – Child and Family Services (CFS) honored the Stebbins Family and PROCON in a ribbon-cutting ceremony on May 12, at the opening of its new youth center. The newly renovated center was named “The Katherine and Herbert Stebbins Youth Resource Center” to honor the parents of PROCON CEO and chairman, Mark Stebbins. Stebbins was in attendance with his wife, Sally, and mother, Katherine “Tinka” Stebbins.
Last year the architectural and construction management firm donated $200,000 towards the center’s renova-tions, along with the resources of its design team, that helped with furniture acquisition and interior fit-ups. In March 2016, an additional $50,000 was added for operations of the center.
The youth center opened its doors last November and provides support services for homeless youth in the city, ages 12 to 22 years old. The facility provides them with a hub to address personal needs such as receiving a meal, doing laundry, or taking a hot shower. However, they may also work towards educational or career goals or participate in workforce
development and finding jobs.Stebbins thanked everyone for
supporting CFS. “My brother and I grew up in the building behind this one, and my father and grandfather spent years of their lives here. We are very proud of our roots in Manchester and we hope that my parent’s name on the facility will be a reminder that every teenager deserves love and guidance.
We are so glad to be able to give back to the City that gave us so much.” As it turns out, the new Center’s opening was commemorative in many ways for Mark Stebbins. Lincoln Street happens to be the very location where Mark’s grandfather, Blanchard, opened the family business in 1935.
President/CEO of Child and Family Services Borja Alvarez de Toledo welcomed guests and paid tribute to the Stebbins’ 25-years of unwavering support and how they made the youth center possible. Borja summarized the effort needed to reach Manchester’s homeless youth, “It takes every one of us lending our support to make a difference in the lives of these kids.”
Mark Stebbins, CEO of PROCON; Ted Gatsas, mayor of Manchester; Sally Stebbins, PROCON marketing; Katherine “Tinka” Stebbins; Borja Alvarez de Toledo, president, Family Services; and
Erin Waters-Child, development coordinator, Family Services
Henry Joins MorrisSwitzerBurlington, VT – Regan Henry, PhD, RA, AIA, LEED AP, GBSS, recently joined the MorrisSwitzer Environments for Health Burlington office. She is a licensed architect with 10 years of experience.
Henry is highly proficient
Work Progress on Wildcat Stadium
Durham, NH – Construction is currently under way at the Wildcat Stadium on the Durham campus of the University of New Hampshire. The overall scope of the project includes development of a 34,907gsf interior and 52,908gsf exterior for the new stadium. As much seating and amenities as possible fit in a compact site bound by the existing field and College Woods. Ledge slopes from one side of the footprint to the other, requiring the use of both spread footings and pile foundations.
The exterior of the stadium features architectural ground face and split face block, custom sills, and Omni Block (a patented insulated masonry wall system), all manufactured by Genest Concrete of Sanford, Maine. Because this facility is part indoor and part outdoor, there are many steel penetrations in the thermal envelope. This thermal bridging was mitigated with the use of thermal break
pads. Classic waterstruck brick and standing seam gable roofs make this unique stadium right at home on this New Hampshire campus.
One unique aspect of the new facility is that visitors enter underneath the videoboard, walk along a sweeping path, over a dramatic 90-ft. bridge, and find themselves right next to the concessions on the main concourse. One level up, the exclusive Victory Club offers 500-plus exterior seats for viewing a game, a function area overlooking the woods beyond, floor-to-ceiling glass towards the field, and large outdoor patios. The top level has continuous views of the field for the press and coaches, and three dedicated platforms for broadcasting cameras at home on this New Hampshire campus.
The project is scheduled to be completed prior to the first home football game in September.
UNH Wildcat Stadium
Brookstone Completes ShipyardManchester, NH – Brookstone Builders, Inc., recently completed a demolition and renovation project for the U.S. Navy.
The project involved interior updates in an existing structure at the Portsmouth Naval Shipyard. The scope-of-work included the overall expansion of two kitchenette areas, select demolition, and
installation of new custom cabinetry, flooring, and finish work. Due to the security requirements of the areas to be renovated, all work had to be coordinated with security escorts.
Brookstone Builders served as a subcontractor, with NADIAD, Inc. of New Jersey serving as the primary contractor.
DESIGN-BUILD TEAM FOR WILDCAT STADIUM:
OWNER: The University of New HampshireARCHITECT: Lavalleee Brensinger Architect.
DESIGN-BUILDER: PC Construction CompanySTADIUM CONSULTANT: Populous
STRUCTURAL ENGINEER: Foley Buhl Roberts & AssociatesMEP/FP ENGINEER: Yeaton Associates
FOOD SERVICE CONSULTANT: Food Service DesignAV/IT CONSULTANT: Wrightson Johnson Haddon & WilliamsGEOTECHNICAL ENGINEER: S.W. Cole Engineering, Inc.
CODE CONSULTANT: Howe Engineers
in AutoCad, REVIT, and SketchUp. She will be joining the master planning team, bringing a unique research-based perspective to healthcare delivery.
She also will be advancing the firm’s initiatives in evidence-based design and planning.
Regan Henry
www.high-profile.com
June 2016 35
FOR BOSTON’S LARGEST CONSTRUCTION PROJECTS,PEOPLE LOOK TO THE EXPERTS IN HVAC CONTROLS.
That’s why time and again, J.M. Electrical is selected to provide professional quality for superior results from over 30 years in business.
BUILDING AUTOMATION SYSTEMS
FIRE ALARM & SECURITY
INSTRUMENTATION
RENEWABLE ENERGY
RETROFITS
PERFORMANCE CONTRACTING
SERVICE GROUP
6 Kimball Lane, Suite 320 Lynnfield, MA 01940 [email protected] www.jmelectrical.com
Harvard University
PricewaterhouseCoopers
Millenium Place
High-Profile: Northern New England
Jewett Selected for Subaru Reno
Rendering of the Renovated Stanley Subaru
Ellsworth, ME – Raymond, N.H.-based Jewett Construction Company, Inc. has been selected by Stanley Subaru to undertake a 22,000sf design-build renovation of its Ellsworth, Maine auto dealership. The project includes renovations and three additions to the existing dealership and annex buildings.
Carefully coordinated project phasing will be undertaken to ensure the firm’s daily operations continue uninterrupted. A conventionally framed addition to the annex building will first be constructed, creating a new auto reconditioning department and administrative offices — after which all operations will be relocated there while the second phase of
construction is under way.Phase 2 includes both a renovation of
the dealership building’s existing interior in accordance with Subaru of America’s latest image upgrade requirements as well as two additions, a pre-engineered metal building by Butler Manufacturing to house a new service department, and a conventionally framed addition destined for a new, expanded showroom — the two additions requiring the integration of steel-framed structures with wood framing, as well as conventional steel with pre-engineered metal building components. The entire project will be completed by January 2017.
Coach Bus Terminal Under Way
Lebanon, NH – North Branch Construction of Concord recently began construction of a new two-story bus terminal for Dartmouth Coach. The steel and wood-framed terminal built on the site of a former auto dealership will include offices for management on the second floor and a clear story over the waiting room with post and beam trusses.
Design for the project is provided by Sheldon Pennoyer Architects, PLLC of Concord.
Foundations for the building are complete and framing is beginning. Construction is expected to be complete by late fall. Dartmouth Coach bus terminal waiting room
Dartmouth Coach bus terminal exterior
www.high-profile.com
June 201636
Sales • Design • Installation • Inspections • 24/7/365 Service
Main Offi ce 8 North Wentworth Ave Londonderry, NH 03053
603.432.8221 603.434.3194 f
Service Department 55 Harvey Road
Londonderry, NH 03053 603.432.8221
603.434.8128 f
Upper Valley Offi ce 104 Etna Road
Lebanon, NH 03766 603.448.5461
603.448.7334 f
Monadnock Offi ce 277 Old Homestead Hwy
Swanzey, NH 03446 603.358.6736
603.358.6832 f
www.hampshirefi re.com
Philanthropy KBE Walks to End Homelessness
KBE staff members and their families attend the ninth annual Walk to End Homelessness
New London – CT New London Homeless Hospitality Center benefited from KBE Building Corporation’s dedicated volunteers at the ninth annual Walk to End Homelessness, held in April.
Four KBE staff members and their families attended the event and raised money for the cause.
The construction firm also donated
money on behalf of its corporate philanthropic program, 50 Ways to Make a Difference.
This year’s two-mile walk raised a re-cord $20,000 and saw a record attendance of 500 people. The total proceeds aided the New London Homeless Hospitality Shelter and all its programs.
AGC Volunteers Support St. Mary’s54 Construction Companies and OrganizationsBoston – More than 150 volunteers representing the Associated General Contractors of Massachusetts (AGC MA) returned to St. Mary’s Center to repair and improve the Dorchester campus on May 13. The day-long project brought a substantial level of capital and professional support to the aging facility, located at the former St. Margaret’s Hospital. More than 600 women and children receive shelter, education, and employment training at St. Mary’s Center each year.
This year, the day of service included building a sensory room to provide occupational therapy for children from birth through 12 years of age who have been removed from their home due to trauma, abuse, or neglect.
In addition, the AGC MA will complete projects in GRLZ Radio, an afterschool program and web-based radio station for teen girls.
Last October, St. Mary’s Center hon-ored AGC MA at its annual Diamonds of Dorchester event, bringing together the lead volunteers and companies to receive the John M. Corcoran Award for Excellence.
St. Mary’s Center President Deirdre Houtmeyers recognizes the value and impact of theday of service. “We cannot do our work alone. It takes a village to help our women and families break free from poverty, abuse, and homelessness. Thanks to the generosity and talent of the AGC, we can ensure the families we serve have a dignified space to call home and a warm learning environment as they work toward self-sufficiency.
Mayor Martin Walsh and his Office of Neighborhood Services along with Boston City Councilor Frank Baker have advocated for the families of St. Mary’s Center and played an integral role in making this service project possible in both 2015 and 2016. Boston City Councilor Frank Baker along with members from 54 organizations took part in the day of service.
and it also fosters a happy and healthy patient experience and improves staff satisfaction, and that happy, healthy pa-tients and staff lead to improved recovery results.
On average, MEP typically constitutes 25% to 30% of the total project cost, creeping closer towards 40% with a complex/specialist medical facility. There is an increased commitment from archi-tects, owners, and construction firms to invest in selecting the right MEP systems, recognizing the significant benefits.
For the past several years, there has been a noticeable improvement in the per-ception of the MEP design for hospitals and AMCs. Whereas it was usually “the boring, technical stuff” that was engaged after the concept stages, it is now in-creasingly viewed as vital to the intended performance of the building. The clients understand the significant long-term op-erational cost savings that can be made by conceptualizing and identifying benefits and challenges for system options early in the process.
If we are going to meet expectations when it comes to building performance, energy efficiency, and wellness, MEP needs to be fully integrated into the design process from the early preconceptual and concept development stages. Rethinking a building’s aspect or optimum window sizes and shapes at the start of a project, for example, can significantly reduce the need for air conditioning, thereby using
natural shading to reduce solar gain with-out compromising on daylight. This has a positive impact on the energy efficiency and carbon footprint of a building, and on the environment for occupants.
We have been privileged to work with clients that embrace the early engagement model, with excellent results. On some of our major international hospital campus projects (several spanning over 8 million sf) we drove the preconcept stage in order to assist with identifying challenges with programming, block and stack, form, and building massing intent as related to its projected functionality and energy model. It is better to start early with clients on identifying ways to reduce loads before we apply solutions to maintaining envi-ronmental conditions. Today’s standard of care in the healthcare industry require that we approach the building and its engi-neering infrastructure as a system and set energy use criteria that enhance the indoor environment, and consider the health and wellness of the people in the spaces, rather than focusing on incremental improve-ments beyond a conventional baseline.
The benefits of early engagement are tangible and within our reach. An integrated design approach should be the norm across our industry. Only then will we be able to realize the full potential of our buildings and make the environments we work and live in more efficient and enjoyable to inhabit.
Hani Mardini, LEED AP BD+C, is an associate at Vanderweil Engineers in Boston.
MEP Design Trends for Healthcarecontinued from page 9
www.high-profile.com
June 2016 37
CorporateMaugel Completes Fit-Out for Comcast
Chelmsford, MA – Maugel Architects has completed the 131,000sf tenant fit-out for Comcast’s Greater Boston regional headquarters, located at Five Omni Way in Chelmsford.
Maugel had previously designed the façade and lobby improvements at Five Omni for building owner Griffith Properties.
The fast-paced project included the design of a 35,000sf call center, a product demonstration lab, a training facility, an executive suite, a fitness center, and a full service cafeteria. The new design features sleek finishes, predominately open workspace, and shared amenity spaces, such as huddle rooms.
In addition to Maugel Architects and
Comcast, other team members included property owner Griffith Properties, AHA Engineers, and Aberthaw Construction.
Maugel created a flexible design that
allows for future growth. The building also features open ceiling concepts with LED lighting, an energy management sys-tem, and full service generator back up.
Lobby
Collaboration spaces
Breakroom Training room
Civil Engineering | Landscape Architecture | Land Use Planning Land Surveying | 3D Laser Scanning | Renewable Energy
Beverly, MA500 Cummings Center, Suite 5950Beverly, MA 01915Phone: (978) 299-0447Email: [email protected]
Westborough, MA69 Milk St., Suite 302
Westborough MA 01581Phone: (508) 871-7030
Email: [email protected]
We are currently seeking an experienced Project Engineer (Beverly office), a Sr. Project Engineer (Westborough office), and a Sr. Landscape Architect (either office).
MERIDIAN ASSOCIATES
www.high-profile.com
June 201638
High-Profile: What circumstance led to the formation of Barnes Buildings? Marty Barnes: In the early and mid 1990s, I could see two main factors playing out. 1: Engineered building systems were becoming a major player in the low-rise commercial marketplace due to their expanded design capabilities and flexibility, product selection, and of course, they made economic sense.
2: Having worked previously in the manufacturing sector of the steel building business in the 1970s, and then as a general contractor in the 80s providing design build services utilizing engineered steel building systems, I saw a necessity for a contracting source to provide the proper materials and erect the systems correctly as a contract package. This business had inherently been for a general contractor to purchase a cheap building and hire a low cost erector and it generally ended up a mess! The erector and the building company would blame each other for the debacle, and the contractor and owner ended up with unfulfilled expectations.
HP: Did the 2007 recession have an effect your business plan? MB: 2008 through 2011 were very difficult times where we had to cut back substantially on everything, including making corporate investments. We did our best to hold onto our most valuable resource – our loyal, hardworking people, many of whom who have been here since our early years! There were no real margins to be made and we tightened the lines on our ship and rode it out.
HP: Who is your customer? That is, what are the owner needs that make a good match for your services?
MB: Most of our clientele is now repeat business, whether it be general contractors, developers and/or business owners. These customers are often trying to determine the most cost effective method to achieve the end result they desire, and we will work with them right from the early design stages to make it a reality!
They also require their buying process to include excellent quality and fair value for their investment, and they know they can count on us to honor our commitment.
HP: In what sectors and territory has Barnes Building expanded? MB: We, of course, originated from the pre-engineered buildings market and have expanded into what would be considered “higher-end engineered buildings” and also the insulated metal wall and roof panel products.
One of our better investments was construction of our steel fabrication shop in Hanover, Mass. over eight years ago, which has enabled us to offer complete steel packages. We fabricate structural steel and miscellaneous iron at this facility, and my son Tony Barnes has done an excellent job of bringing that market along for us.
We can offer and fulfill as a single source nearly all of our customers’ structural framing and envelope building requirements.
HP: Will you share with HP examples of projects you currently working? MB: Edesia, whch is a food processing facility, Canton Ice Rink, Brewster Ambulance, and Tyngsboro Sports Center.
HP: Are there architects or vendors that you work with fairly regularly? MB: Our main building supplier is Metallic Building Company of Houston, Texas, our partner since the beginning, as well as Metlspan Corporation for our panel systems. We have a tremendous relationship with both of these companies, and we utilize that relationship factor when needed to meet customer demands with complex and fast track projects. We have worked with a number of excellent architects and engineers throughout
Marty Barnes On 20 Years of Building Success
High-Profile had the opportunity to interview Marty Barnes for insight on his company, BARNES Buildings & Management Group, Inc., during its 20th year celebration.
Xaverian Brother’s High School Athletic facility.
Tim Allison, VP of project management; Lynne Barnes, controller; Marty Barnes, president; Tony Barnes, GM steel fabrication division; and Anthony Poliatti, project manager
100 Armstrong Way
Canton Ice Rink
the years such as RKB Architects of Braintree, Mass. for Edesia; Pando Associates of Canton for Canton Ice; and Beacon Architectural of Boston for Xaverian Brothers High School athletic facility.
HP: What do you see as the direction of Barnes Buildings in the near future and 20 years ahead? MB: In the near term, we look forward to opening our new corporate office this summer, which will lead to some exciting company changes as we reevaluate and expand our management team. As for the future, I envision our time-honored BARNES team driving our core mission forward with excellent customer service and continued success for all.
High-Profile: Corporate
www.high-profile.com
June 2016 39
Engineered Steel Building Systems • Steel Fabricators – Structural and Miscellaneous Iron
Metal Wall Panel Systems – Foam Insulated • Metal Standing Seam and Architectural Roofing
Professional Steel Erectors and Installers • Complete Steel Packages Supplied and Installed
Design-Build Professionals Prepared to Meet with Your Team
781-337-5277 | [email protected] | www.barnesbuildings.comP.O. Box 890159, Weymouth, MA 02189
Steel Construction Specialists
20th 1996 2016Anniversary
Put the BARNES Advantage to work on your next project!
Alpha Flying at Pease Air Force Base
Renaissance Hotel, in Foxboro, MACenter Subaru in Torrington, CT
Raymond J. Bourque Arena at Endicott College Pingree School in South Hamilton, MA
www.high-profile.com
June 201640 High-Profile: Corporate
WE BUILD
WITH GRATITUDE
2016 marks JC&A’s 20th Anniversary. While we have certainly evolved over the years,
we have never wavered on our commitmentto our people, our clients or our community.
Thank you for your continued support!
J. CALNAN & ASSOCIATES CONSTRUCTION MANAGERS3 BATTERYMARCH PARK \ 5TH FLOOR \ QUINCY, MA 02169 \ WWW.JCALNAN.COM
jcalnan_20yr_generalad_COLOR.indd 1 5/26/2016 12:10:48 PM
Kronos Executes Lease at CrossPoint$40 million Build-Out to Begin
Lowell, MA – Anchor Line Partners, LLC and Farallon Capital Management LLC announced that Kronos Incorporated has executed a 12-year, 435,000-plus sf office lease at CrossPoint in Lowell. Kronos is one of the largest technology employers in Massachusetts and a global leader in providing workforce management solutions in the cloud with more than 25,000 customers around the world.
In one of the largest office lease relocation transactions in Greater Boston in the past 10 years, Kronos will relocate its corporate headquarters to CrossPoint and unite “Kronites” under one roof, occupying more than 435,000sf across
the entire first tower — and additional floors in the second tower. Kronos and CrossPoint’s ownership team plan to invest more than $40 million toward the design and build-out of a completely modernized facility.
The architect for the project is Packard Design, and J. Calnan & Associates, Inc. is the general contractor.
Cushman & Wakefield’s John Boyle, Joe Fallon, Michael Dalton, and Debbie Howerton led a team of professionals that represented Kronos in this transaction. Andrew Maher, managing director of Anchor Line Partners, along with CBRE/New England’s Mark Reardon represented ownership interest in the transaction.
Kronos Executives (l-r): Chris Todd, Senior VP of Operations & CSO; , Alyce Moore, VP & General Council; Mark Julien, CFO; Aron Ain, CEO; Vince Devlin, CPO;
Jonathan Proffitt, SR Director of Global Real Estate
OSA Moves into New Corporate HQ
Reading, MA – O’Sullivan Architects, Inc. (OSA) has completed its corporate headquarters move into the top floor of the historic M. F. Charles Building in the heart of downtown Reading.
“After months of looking into surrounding communities for expanded office space, we are very excited to be able to stay in downtown Reading.” said David O’Sullivan, AIA, president and founder of the firm.
The building has undergone a complete restoration over the past two years.
The GC was Carr Enterprises, LTD
O’Sullivan Architects’ new corporate office The blank canvas before the design build-out
from Peabody. Adam Gray, vice president, served as the project manager.
Janice Gorman, senior interior designer, worked out the build-out footprint. The new office layout is 50% larger than the former office and has maintained an open concept throughout the suite. From the 100-year-old reclaimed wood features in the reception area, to exposed exterior brick perimeter walls, to all exposed roof trusses throughout, all take full advantage of added daylight from the building’s only roof monitor.
www.high-profile.com
June 2016 41
Patient care is complicated. It gets harder when contaminants from the materials, process and workers involved in construction are introduced. That’s why the Carpenters union has developed “Infection Control, Risk Assessment”
(ICRA) with national leaders in construction, health care and infection control. It’s a comprehensive certification program that teaches carpenters to recognize and avoid creating environments that hamper the healing process. Ask for ICRA-certified carpenters for your next project.
The New England Regional Council of Carpenters. Building in health.
To learn more, visit NERCC.org
It’s hard to healpatients in a dirty
environment.
High-Profile: Corporate
MPA Engaged to Reposition UPLAND
UPLAND Atrium / rendering by MPA
Norwood, MA – Margulies Perruzzi Architects (MPA) has been selected to revitalize and reposition UPLAND in Norwood.
Campanelli engaged MPA to work with its design, leasing, and construction teams to develop a comprehensive strategy for improvements to the 193,000sf Class A office building that was formerly known as Upland Woods Building 100.
MPA and Campanelli started the process with a careful analysis of market demand in order to design a uniquely attractive asset that appeals to both established and growing companies.
Inside, MPA created a dramatic amen-ity street that connects the new east and west entries and offers all tenants access to the new two-story, sky-lit atrium.
This central street with storefront-style tenant entrances is dotted with impromptu gathering spaces to create community for tenants. UPLAND’s large floor plates and exposed high ceilings provide tenants with open, flexible and brightly lit spaces and accommodate companies starting at 11,000sf. Multiple new exterior entrances provide convenient access to parking, and new landscaped areas offer tenants seating space for outdoor meetings.
A former Polaroid manufacturing center, UPLAND’s dramatic revitalization includes a new full-service café, a best-in-market fitness center with a virtual ride instruction spin studio, conference facilities, and a gaming area with foosball, Ping-Pong tables and shuffleboard.
The project is expected to be complete in September 2016.
UPLAND East Lobby / rendering by MPA
www.high-profile.com
June 201642 High-Profile: Safety Week
Together. Let’s Build.shawmut.com
Boston Medical Center, Moakley Addition / Boston, MA Brown University, Applied Mathematics / Providence, RI
Northeastern University, FAS Center for Global Business / Boston, MA Eli Lilly / Cambridge, MA
BOSTON I WEST SPRINGFIELD I PROVIDENCE I NORTH HAVEN I NEW YORK
Shawmut Hosts Safety Event for Industry Leaders
(l-r) Shaun Carvalho, Shawmut safety director; Jim O’Neill, BOND safety manager; and Les Hiscoe, Shawmut CEO
Boston – Shawmut Design and Construction recently hosted a Safety Stand Down at MIT for leaders in the construction industry to train and discuss the importance of company leadership driving safety throughout the organization.
The Shawmut hosted event brought together attendees from across the industry including BOND, OSHA, MIT, Laborers’ International Union of North America (LIUNA), trade leadership, and subcontractors. The event included trainings on fall and back injury protection from OSHA, and a stretch and flex demonstration conducted by LIUNA.
This Safety Stand Down was part of Shawmut’s annual Safety Week, that teaches staff to actively train and manage safety techniques and protocols. Last
year’s event included over 175 events with 12,000 people trained nationwide. The program and participation continues to grow year-over-year, as it’s a big part of the senior leadership team’s overall strate-gy and renewed commitment to safety.
“This is our seventh year celebrating
Safety Week at Shawmut,” said Shaun Carvalho, Safety Director at Shawmut. “As Shawmut continues to experience exponential growth nationwide, we want to make sure every person on our job sites has the empowerment, training, and knowledge to be as safe as possible.”
www.high-profile.com
June 2016 43
617-254-1700 • Fax: 617-254-0234 17 Electric Avenue, Boston, MA 02135
www.valleycrest.com
Esplanade Hatch Shell-Soil and Lawn Renovations
New Balance HQ - Geofoam Installation
The Work Force of Nature Boston /New York
Current Landscaping Projects Include:
• Novartis BioMed – Skanska USA
• 75/125 Binney Street – Gilbane Building
• Fan Pier Park – Turner Construction
• MIT Killian and Lowell Courtyards – Bond Brothers
• Brighton Landing/New Balance HQ – John Moriarty and Associates
• Millennium Tower @ One Franklin Street – Suff olk Construction
• Amherst College Greenway Dorms Project – Gagliarducci Construction
• Brigham and Women’s BFF – Suff olk Construction
• Thurgood Marshall Middle School – Walsh Brothers Construction
• MIT RE 610 Main Street Phase 2 - John Moriarty and Associates
• Plainridge Park Casino – Turner Construction
• Kendall Square South Plaza Renovations – John Moriarty and Associates
• Boston College 2150 Commonwealth Ave. – Bond Brothers
• Seaport Square “F” Park (Mass Fallen Hero’s) – Boston Global
• 50/60 Binney Street – Turner Construction
• 275 Wyman Street – Commodore Builders
• Charles River Skate Park – Charles River Conservancy
• Seaport Watermark – Skanska USA
• 125 High Street – Structuretone
• MIT Kresge Auditorium – Lee Kennedy Construction
YEARS1 9 4 9 - 2 0 1 4
Retail & Hospitaity EDENS to Create Mixed-Use Center
Boston – EDENS, a national retail real estate developer, recently received approval from the Boston Redevelopment Authority Board for a 700,000sf mixed-used development at South Bay. The plans envision a transformation of the adjacent vacant industrial property and concrete plant into a vibrant, dynamic town center along with upgrades to the existing South Bay shopping center.
Drawing from its 50 years of experience in crafting community gathering places across the country, EDENS is proposing 113,000sf of restaurants and shops, a 12-screen luxury AMC Theatre with IMAX, a flagship Wahlburger’s, and a 130-room hotel.
The firm will partner with Mill Creek Residential to bring 475 housing units to
the South Bay development with a mix of studio to three-bedroom residential units. The new residences, all within close proximity to two T Stops, will be highly amenitized with roof decks, a pool with cabanas and grilling areas, fitness facilities, and more.
Planned investments include over $7 million to neighborhood infrastructure improvements and over $1 million in community benefits during South Bay’s development. In addition to partnering with local authorities to make significant traffic improvements for the community, EDENS will increase security, shuttle services, and create a series of landscape improvements, a pedestrian main street, and welcoming outdoor spaces.
Proposed South Bay development
Jewett Completes Exeter Subaru Reno
Stratham, NH – Raymond-based Jewett Construction Company, Inc. has completed an extensive design-build renovation of the Exeter Subaru dealership in Stratham.
This challenging, 17,500sf renovation—which includes a 7,200sf addition for a showroom, office and service area—was designed to incorporate the town of Stratham’s stringent Gateway Zoning requirements. Aesthetic features added to lend the facility a more residential appearance include clapboard
siding and asphalt shingles, gabled roof lines with dormers, and a cupola.
Design of the facility also included the use of such environmentally friendly products as energy efficient LED lighting throughout, as well as a specialized porous exterior pavement whose sublayers allow for slow filtration to the water table—thereby minimizing storm water runoff into the wetlands. All renovations were phased to ensure the fully operating facility experienced no disruption in its day-to-day business.
Newly Renovated Exeter Subaru in Stratham, NH
www.high-profile.com
June 201644
(508) 748.6545 • southcoastimprovement.com
Repeat Business Is The Way We BuildOur repeat customer list speaks for itself: Atria Senior Living,
Brookdale Senior Living, Brightview Senior Living, Boston College, Boston University, Revera Health Systems, Brookdale Senior Living
Preconstruction Analysis • Construction ManagementGeneral Contracting • Design/Build Services • Capital Improvement
Building Envelope Improvements • Interior Renovations
www.copley-wol ff .com617 654 9000
making places memorable
Ink Block, Roof Deck, Boston, MA
LandscapeFive Ways to Enhance your Landscape with Money Saved on Snow Budgets
We all know that budgets not spent have a funny way of disappearing from future property management operating budgets. “Use it or lose it,” they say. Now the question is how best to use that available money so you can maximize its impact not so much today, but in the long-term interest of your property or long-term reductions to your operating budgets. The basic assumption here is that your snow budgets and your landscape budgets are closely related, if not combined.
If you have had the benefit of a seasoned and professional landscape contractor, some of these options have likely been reviewed with you at some point. So where do you look to find landscape maintenance investment opportunities? I suggest that you start with either that list of deferred maintenance items or that five-
year capital planning list (that I know you all have). Here are some ideas:Invest in PerennialsYear after year you spend money on annu-als that, although providing instant grati-fication and curb appeal, are planted, then ripped out only to be repeated annually. The upfront cost of planting perennials can be double that of annuals. If you do the math, a perennial installation, which enhances the property year after year, will pay for itself in two to three years.Aerate Your LawnThis is a process that enhances your turf by helping with air circulation, water absorption, and decompaction of soils. The problem is the service itself gives no instant and visible gratification, so it’s often overlooked and eliminated from budgets. Investing in this landscape maintenance service will pay dividends through improved and more resistant turf for two to three years.Make Irrigation Assessment And UpgradesMost irrigation budgets account for start-ups, shut-downs, and some minor repairs. Investing in an irrigation assessment and upgrades pays dividends in many ways.
The obvious way is through grass that is watered consistently, avoiding soggy areas and burned areas in the summer. The less obvious benefit is through reduced water consumption and waste. There are simple strategies of watering at appropriate times,
watering for appropriate durations and fre-quencies for site conditions. There are also more highly advanced strategies including low-volume heads and weather station controllers. Depending on the property or the investment, the savings can range from a few hundred dollars per year to several thousands of dollars per year.Repair Poorly Drained AreasWhether they are low spots in the land or otherwise poorly drained areas, they show
by Jon Ciffolillo
themselves year after year through ruts caused by maintenance equipment, areas that cannot be mowed, or in the worst cas-es, standing water that invites turf-borne diseases and mosquitoes. Investment in a properly designed drainage system can minimize if not eliminate these problem areas and add to the long-term perfor-mance of your property.Spend It On Fun StuffDepending on the property type, you surely have had your sights set on some form of capital improvement, like hardscapes. A corporate site may benefit from a nice stone entry wall. A residential property might benefit from a barbecue area or a fire pit. A hospital or institutional property might find value in a healing garden or an otherwise quiet secluded garden area. This type of investment yields quite different upside. Besides potentially attracting the best employees or the best residents, it can pay the dividend of having a nice area on your property that you and your tenants or employees can enjoy and take pride in.
Jon Ciffolillo is VP of business development at Greenscape Inc., of Middleborough, Mass.
www.high-profile.com
June 2016 45
3-D Models & BIM • 3D Laser Scanning • As-Built 2D Drawings • BOMA & SF Calculations
ACCURATE AS-BUILT MEASUREMENTS AND DOCUMENTATION
www.existingconditions.com /617.247.9161
FREE 3D LASER SCANNING when we create 2D CAD drawings or 3D BIM models of your building.
Restoration & Renovation
389 Congress Restores FacadeBoston – Abbot recently restored the façade of an eight-story mixed-use high-rise building at 389 Congress originally known as the Boston Wharf Company Building.
Built in 1907, the building was constructed of poured steel reinforced concrete with brick panels under the windows, and was used for manufacturing and warehousing
Abbot sequenced the repair by doing one elevation at a time on all four sides of the building. 389 Congress Street
Ostrow Electric Completes Renovation at MIT
Cambridge, MA – Ostrow Electric Company, a NECA contractor based in Worcester, has completed the compre-hensive electrical renovation of MIT’s historic Sloan Building – E52, located at 50 Memorial Drive in Cambridge.
Electrical distribution is delivered from a 13.8kV substation, via 75 distribution panels, which the Ostrow
team wired and installed throughout the building.
The complete restoration of the 143,950sf building included construction of a new, 20,000sf seventh floor glass-enclosed addition, which doubles the size of the MIT Faculty Club and also houses a new conference center.
Ostrow’s project scope included
MIT Sloan Building / photo: Beyer Blinder Belle Architects
installation of the building’s new primary and emergency systems, lighting and lighting control, fire alarm, and security systems. For life safety, the building is equipped with a voice evacuation fire alarm system.
The building’s elaborate access control security system consists of 127 doors at the facility armed with card readers and access control.
The building showcases an MIT Percent-for-Art lighting piece designed by artist Leo Villareal. The work features
240 hanging, 9-foot LED rods arranged from the ceiling in the north vestibule. The lights cycle through a randomly generated series of combinations.
Ostrow Electric supported the installation of the fixtures, installing power and communications wiring to allow function and control of the cascading element of LEDs.
The project team includes architect Bey-er Blinder Belle Architects and Planners, LLP, New York; Engineer BR+A, Boston; and CM Consigli Construction of Milford.
www.high-profile.com
June 201646
Copyright © Jacob Sharp Photography
a rch i tecture in ter iors p lann ing
www.cube3studio.com
989.989.9900
g g yDDDDDDDDDDDDDDDDDDDeeeeeeeeeeeeeeeeesssssssssssssssiiiiiiiiiiggggggggggnnnniiinnnnggggg yyyoouuurrrr vvvviiiisssiiiiiiiooooonnnnnnnnng g y vcorporatefitness & sportshealthcare
academicresidentialhospitalityretail
C
M
Y
CM
MY
CY
CMY
K
High_Profile - Advertisement - 11.11.15.ai 1 11/11/2015 11:40:56 AM
HEAVY CIVIL / INDUSTRIAL GENERAL CONTRACTORS
Power Generation • CHP • Biogas • EPC • BiomassWastewater Treatment Plants Design/Build • Tank Distributor/Erector • Safety Centered • High Bonding Capacity
CELEBRATING OVER 55 YEARS OF INDUSTRIAL EXCELLENCE
STRUCTURAL METAL FABRICATION EXPERTSCUSTOM • ALUMINUM & TITANIUM • MODULAR FABRICATION
Structural Steel Fabrication & Erection • Micellaneous MetalsStainless Steel / Non-Ferrous • Specialty Coatings • AISC Certified
SEE THESE PROJECTS & MORE ONLINE AT WWW.SUMMITMETALFAB.COM
SEE THESE PROJECTS & MORE ONLINE AT WWW.METHUENCONSTRUCTION.COM
TO REQUEST MORE INFO ON METHUEN CONSTRUCTION OR SUMMIT METAL FABRICATORS, CONTACT SCOTT M. COULOMBE, DIRECTOR OF BUSINESS DEVELOPMENT, AT 603.328.2298
Visit with us at NEBFM2016
Booth #553
Multi-ResidentialAbbot Restores Facades of Two Adjacent Buildings
Boston – Abbot recently restored the façades of two adjacent brick and precast concrete buildings used for subsidized housing at 414-418 and 422 Columbia Road in Boston’s Dorchester section.
In 2015, Building Envelope Technologies, Inc. of Easton evaluated the façades of both buildings to determine the extent of deterioration that had taken place over time. Abbot performed the repairs on the front elevations of both buildings:
• Chemically cleaned all of the brick to remove atmospheric dirt. Cut and repointed all of the brick and replaced the deteriorated precast concrete headers, sills, bands, keys, and quoins between the brick headers.
• Removed any deteriorated steel above the windows, installed new galvanized steel where appropriate, and then re-installed the existing brick that could be salvaged and installed new brick to
match the original color.• Replaced deteriorated precast
concrete, to match existing shapes and sizes where necessary, including the building foundation.
To complete the repair, Abbot applied a pigmented elastomeric coating that matched the original color to protect the precast concrete.
414-418 Columbia Road
422 Columbia RoadAdditionally, at 422 Columbia
Road, the precast concrete at bottom of building was severely deteriorated. Instead of patching the deterioration as had been done in the past but constantly failed, it was decided to remove and replace approximately 25% of the 3-ft. x 4-ft. stone blocks to provide a more permanent solution.
www.high-profile.com
June 2016 47High-Profile: Multi-Residential
Mitchell Holds Grand OpeningFinegold Alexander ArchitectsWilliamstown, MA – Mitchell Properties announced the grand opening of Cable Mills, the new 61-unit residential loft development located along the Green River on Water Street in Williamstown.
After more than a year of construction, the historic buildings have undergone a dramatic transformation from their past as a factory making wire and cable dating back to the post-Civil War era.
The adaptive reuse design drew on the expertise of Finegold Alexander Architects.
“Designing these units in this historic mill setting allowed us to take advantage of the tall ceilings, expansive windows, exposed brick and beams,
open floor plans, and stunning views,” said Jim Alexander, principal at Finegold Alexander Architects. “The result is absolutely breathtaking.”
Working with the existing envelope, the design team created a multitude of layouts from townhomes to single-level flats, many with views of the landscaping, river, and mountains beyond.
“This was a true team effort with commitment on all sides from the town, to the financing team, to the tradesman onsite,” said Dave Traggorth, principal of the Traggorth Companies and project manager for the development.
Bond Issued for Roxbury HousingBoston – MassDevelopment has issued a $9.5 million tax-exempt bond on behalf of Madison Williams LLC, an affiliate of the Madison Park Development Corporation, to rehabilitate the former Tropical Foods Supermarket at 2101 Washington Street in Boston’s Roxbury neighborhood into 30 units of mixed-income housing and ground-floor retail.
Sixteen of the units will be rented
to households earning no more than 60% of the area median income, five units at 70% AMI, and nine at market rate. MassDevelopment also assisted the Department of Housing and Community Development with the approval of federal low-income housing tax credits, which provided about $2.7 million in equity for the project. Eastern Bank purchased the bond.
determined, acoustical consultants ensure that acoustically absorptive treatments are applied in key places to help keep unwanted sound from travelling. Absorptive materials also reduce overall din and improve the ability to understand speech.
Common products are fabric-wrapped wall panels and acoustical ceiling tiles. There are several cleanable and low-VOC products available to help ensure healthy environments.Fight sound with soundAlthough this may seem counterintuitive, not all sound is noise. Spaces without a comfortable amount of neutral background noise can make inhabitants feel uneasy by sounding “too quiet,” and also make disturbing noises or private information easier to hear.
Pleasant, beneficial background sound can come from a carefully balanced air-handling system or even an electronic sound-masking system that uses groups of small loudspeakers to generate background sound. When considering this type of electronic system, it’s important to install the system in such a way as to cover up noise disturbing to patients while also allowing care staff to respond to emergencies.
These guidelines aren’t just good
Sound Matters in Healthcare Designcontinued from page 21
design practices, they are often necessary to meet privacy regulations such as those required by the Health Insurance Portability and Accountability Act (HIPAA). Further, they are necessary to assure positive outcomes in patient evaluations used to influence the allocation of federal funding for hospitals under the Affordable Care Act.
Projects that consider acoustics early in the design process tend to get the most well-integrated solutions; when it’s left as an afterthought, the acoustical conditions are rarely as successful. Hospitals are complex facilities with many demands, and the process of their development involves a bevy of designers, engineers, consultants, project managers, and construction professionals. It is the role of the acoustical consultant to not only advocate for the acoustical environment most conducive to healing and a safe, comfortable, and healthy workplace, but also to help coordinate and integrate the acoustical design into the broader architectural context.
Kristen Murphy, LEED AP BD+C, is a consultant in architectural acoustics at Acentech in Cambridge, Mass.Landry/French Is Employee Owned
Scarborough, ME – Denis Landry and Kevin French of Landry/French Con-struction Company recently announced that effective May 2 the company has es-tablished an Employee Stock Ownership Plan (ESOP) and is now employee owned.
According to Denis Landry, president of Landry/French Construction, “There will be no change in leadership or operations, and we will continue to operate with the same business model and management structure.”
Landry/French employees
Shawmut Rolls Out Flex ProgramBoston – Shawmut Design and Construction recently announced the creation and implementation of Shawmut Flex, a program that allows employees the option to flex their time, condense the work week, and telecommute. Recogniz-ing that its people are its greatest asset, Shawmut Flex was designed to improve work-life integration, retain top talent, and recruit the best in the industry.
“Shawmut Flex provides a new and effective avenue to meet company goals and live out our core values — we provide the best client service when we feel our best,” said Les Hiscoe, CEO of Shawmut.
“This new program reinforces our commitment to building a workplace culture of respect, empowerment, and innovation.”
Shawmut Flex follows on the heels of ShawmutYou, another
successful employee empowerment program that offers a personalized de-velopment and learning platform for em-ployees to take ownership of their careers in one easy-to access, secure location. Shawmut’s history of offering employ-ee-empowering programs has directly contributed to being recognized as a Best Place to Work 37 times nationally.
Subscribe to High-Profi le!
Get all 12 issues!Includes each monthly print edition and online version, plus our weekly FAST FACTS FRIDAY.
for only $58.00
High-Profi le Monthly is a three generation family publication that has been faithfully reporting the news of New England facilities since 1997.
Call 781-294-4530 to place your order today.
Receive facility development news of New England design and construction activities, plus Trends and Hot Topics to keep you up to date and connected.
Your business development tool and networking companion.
We are interactive! Send your news and views to: editor@high-profi le.com.
www.high-profi le.com
November 2015
1
BRA Board Approves $136 Million in New Projects
KBE Building Corporation GC for UConn Storrs Project - designed by Amenta Emma
Columbia Celebrates 90 Years of Excellence
Dacon Celebrates 30 Years of Design-Build Project Delivery
Kaplan Named Top 100 Women-Led Business in MA
Marr Climbs One Canal by Katherine Marr
How Good is Your Recruiting Pitch? by Colm Allen
Sanborn Head Celebrates Bringing the Bruins Back to Boston
Zildjian HQ Expansion Complete Design by RKB Architects
Integrated Completes Tenant Fit-Up
Inside this Issue:
P.O
. Box
7, P
embr
oke,
MA
0235
9
Cha
nge
Ser
vice
Req
uest
ed
INDUSTRY EXPERT ARTICLES
Chuck Raymond26
Daniel Herzig Jr.22
Michael Reilly16
Mark Reed 20 Susan Welt
26 Patrick McDonnell50
Jennifer Shelby54
Focus: Life Sciences
November 2015
NEW ENGLAND FACIL IT IES DEVELOPMENT NEWS
Jeffords Lab / photo by Westphalen Photography / page 22
Lowering the Collective Footprint in
Laboratory Design
Plus: Up-Front, Corporate,
Awards, Interiors, Trends & Hot
Topics, Education, Connecticut,
Northern New England,
Philanthropy, Senior/Assisted Living,
Calendar, People, and more...
Featuring:
Fifty Liberty Breaks Groundpage 7
Build New England Awards
Special ABX edition
Massachusetts
www.high-profile.com
June 201648
Subscribe to High-Profile!
Get all 12 issues!Includes each monthly print edition and online version, plus our weekly FAST FACTS FRIDAY.
for only $58.00
Receive facility development news of New England design and construction activities, plus Trends and Hot Topics to keep you up to date and connected.
Your business development tool and networking companion.
www.high-profi le.com
August 2014
1
It’s time for Commercial Carbon Monoxide Monitoring by John V.Carvalho III
Trinity Delivers Port Chester Hall
CBC Elects New 2014-2015 Board
Homewood Suites Breaks Ground, Designed by Group One Partners
MPA Designs Waltham Offi ce Space for Hobbs Brook Management
WBRC Plays Key Role on Bangor Waterfront Projects
J.M. Electrical Begins 75/125 Binney Street
Coull Completes Campus Upgrades
Acentech Provides Acoustic for BCH
Delphi Completes Seashore Point
Is Your Content Global Ready? by Richard J. Dealy
Timberline Completes Two Retail Projects
Featuring:
The Abbey Group Hosts Viridian Topping-Off
Plus: Education, Healthcare, Multi-Residential,
Corporate, People, Awards, Trends and Hot Topics, and more...
NEW ENGLAND FACIL IT IES DEVELOPMENT NEWS
Focus: Retail/Hospitality
August 2014
I N D U S T R YEXPERT ARTICLES
Inside this Issue:
Lee Kennedy Uses Lean Practices to Expedite Delivery of Envoy Hotel
P.O
. Box
7, P
embr
oke,
MA
0235
9
Cha
nge
Serv
ice
Req
uest
ed
Brent Maugel page 12
Robert Cruess page 18
Colm Allen page 22
John K. Pidgeon page 34
Ryan Klebes page 36
Northeast Corner of Envoy Hotel in Boston pg. 23 / Rendering by Group One Partners, Inc.
Call 781-294-4530 to place your order today.
20 Beech St. ExtensionNewmarket, NH 03857Phone: 603-659-2788Fax: 603-659-2389 www.cpifloorcoatings.comEmail: [email protected]
For free estimates email [email protected]
or call 603-659-2788
Senior Living Stroudwater Lodge Progresses Gawron Turgeon Architects, PROCON CM
Westbrook, ME – Construction crews are hard at work framing Stroudwater Lodge Senior Living Community in Westbrook. Construction manager, PROCON of Manchester, N.H., teamed up on the project with the developer, Northbridge Companies of Burlington, Mass., and The Sandy River Company of Portland, Maine. Gawron Turgeon Architects of Scarborough designed the 95-apartment senior living community.
Preliminary sitework began in November 2015, followed by the foun-dation placement that was completed in December. Currently, exterior framing is about 90% finished, and work crews are halfway through the interior framework.
Stroudwater Lodge offers residents a new standard of living for the next
generation of seniors, with numerous onsite amenities for their convenience. The three-story community features upscale one- and two-bedroom apartments with the option of independent or assisted living. Residents may enjoy a theater, art studio, salon and barber shop, café, pub, outdoor patio, brain gym with touch screen technology, and sunroom.
The 90,848sf community is part of the Stroudwater Landing campus and adja-cent to Avita of Stroudwater that opened in 2013. Stroudwater and Avita will cover the full spectrum of senior living needs to include specialized memory care. To-gether, the multiliving communities will function as part of the larger Westbrook community with common spaces to sup-port and connect with local events.
Stroudwater heavy timber side entryStroudwater back-of-house area
SCI Begins Final Phase of Brookdale
Johnston, RI – South Coast Improvement Company (SCI), based in Marion, Mass., recently began the final phase of an exterior renovation at Brookdale Pocasset Bay Assisted Living facility located at 12 Old Pocasset Lane in Johnston, R.I.
The project, which began earlier this year, features renovations to the exterior envelope. This includes new siding, new sheeting, new epoxy on the decks, new paving, new sidewalks, and new windows throughout. The anticipated completion date is later in May. The total cost of the renovation is $1.6 million.
“What’s most gratifying about this project is that our company did the interior renovation last fall. It’s kind of nice to see the entire renovation unfold,”
said Tom Quinlan, president of SCI.Last September, South Coast Improve-
ment Company completed a renovation of common area spaces on the first floor of the facility. That included renovations of two kitchens, two dining areas, a hair salon, and the public restrooms, as well as new carpeting and paint throughout. The entire renovation cost was $541,000.
“One of the challenges of renovating an occupied building is keeping the impact on day-to-day operations and activities to a minimum,” said Quinlan. “By developing a process and through coordination with staff, we can take on renovation projects like these — interior or exterior — and have minimal impact on residents and day-to-day activities.”
Pocasset Bay dining room
Kaplan Begins Work on Lyman Apts.
Boston – Kaplan Construction, a WBE general contractor and construction management firm, has begun renovations for the Lyman School Apartments, an affordable apartment community in East Boston The senior low-income housing apartment project is being subsidized by the federal government’s Housing and Urban Development Division (HUD) and supported by the East Boston Community Development Corporation (EBCDC). The building was listed on the National Register of Historic Places in 2014.
The project features interior and ex-terior renovations to a historic red-brick structure that was originally built in 1912 as the Theodore Lyman School. The 40,000sf, five-story building, located at 30 Gove Street, was converted to elderly housing in the 1980s. The new renovation
will create a mix of 45 rent-assisted stu-dios and one-bedroom apartments, office space, common amenities, and communi-ty space. It will include the modification and rehabilitation of occupied space, including the conversion and upgrade of five units to handicapped accessible units.
Project details include masonry resto-ration, installation of all new windows, new kitchens and flooring, painting, extending sprinkler systems, installation of central air conditioning, updates to code, and updating compliance with the Americans with Disabilities Act (ADA), including an exterior ramp and an interior lift.
Project team members include: Michael A. Interbartolo Jr., AIA of East Boston, architect; and Crossfield Engineering, Inc. of Groveland, mechanical, electrical, and plumbing engineering.
Lyman School Apartments / photo by Marie Sobchuk
www.high-profile.com
June 2016 49
Shipwreck Discovery at 121 Seaport Project SiteDeveloper Unlocks a Piece of Boston’s History at Construction Site for New 17-Story Office Tower
Boston - Development and construction firm Skanska USA and the City of Boston announced the conclusion of an archeological investigation into the remains of a shipwrecked vessel discovered during excavation at the site of Skanska’s 121 Seaport development, a 17-story, 400,000sf Class-A office building with two floors of retail currently under construction in Boston’s Seaport District.
During normal excavation operations at the site, a Skanska employee noticed an unexpected structure believed to be the outline of a boat hull. Recognizing its potential significance, the company halted construction and contacted the City of Boston archaeologist Joe Bagley, the Massachusetts Historic Commission and The Public Archaeology Laboratory to conduct an investigation of the ship’s potential historic significance.
A team of seven archaeologists including the Public Archaeology Laboratory, City Archaeology Program, nautical archaeologists, and archaeologists with the State of Massachusetts convened at the site to document the shipwreck. The team found:
The 121 Seaport ship was wooden,
about 50 feet long, and built sometime between the late 18th and mid-19th century. It had at least two masts.
It held a large cargo of wooden barrels that contained lime, possibly from the Rockland area of Maine. The team found several dozen barrels of lime, suggesting the entire bottom of the ship was covered with lime barrels.
The ship contained two knives, two forks, and a stack of burned plates in the rear of the ship.
The ship sunk sometime between 1850 and 1880. The ship itself is likely older than the date it went down. It could have been made in the late 1700s or early 1800s.
Most of the wood is charred, suggesting that the ship burned because when lime gets wet it reacts to produce heat, which can cause fires. The team was unable to determine if the 121 Seaport ship burned causing it to sink, if it was deliberately scuttled in the low-lying mudflats when the fire started, or if it ran aground and then burned.
Due to age and severe deterioration of the wood due to the fire, removing the remains of the ship from the site in one piece is highly unlikely.
“We are so thankful to Skanska for voluntarily stopping construction to investigate this amazing find. We truly appreciate the opportunity to study the ship’s historical significance,” said Joe Bagley, the City of Boston archaeologist. “We almost never get this kind of opportunity.”
“We’ve enjoyed working closely with the talented team of archaeologists in their search for more information about the ship. Skanska strives to be open and transparent, and we want to respect the communities where we develop and build. That means respecting their history,” said Shawn Hurley, president and CEO of Skanska USA Commercial Development.
(l-r) City of Boston archaeologist Joe Bagley and Skanska USA commercial development CEO and president Shawn Hurley standing in front of the shipwreck discovered at the 121 Seaport
construction site / photo credit: Russ Campbell
121 Seaport / rendering by CBT Architects
“We are highly invested in Boston and believe its history is part of what makes it so special. It is fascinating to unlock some of that history while building the city’s future.”
With the completion of the archae-ological investigation and excavation, Skanska will resume construction activ-ities. The company is committed to pre-serving as much of the deteriorated ship in its ongoing construction excavation process. The company hired an indepen-dent consultant, The Public Archaeology Laboratory, which will continue to work with the city to conduct additional re-search on the ship and compile a report expected later this summer.
Shipwrecked vessel uncovered in Seaport construction site
Preservation
www.high-profile.com
June 201650
National/International
Wilson Butler Designs Auburn Ctr.Auburn AL – Auburn University selected Boston-based Wilson Butler Architects to design a new $50 million performing arts center that will serve as the cultural gateway to the university when the center makes its debut in 2019.
The new facility will include a 1,200-seat multipurpose theater, an intimate music recital hall, practice rooms, and studio and support spaces for students, faculty, and guest artists.
The design team includes Atlanta-based tvsdesign, selected as the project’s architect of record.
Auburn University, a public institution with over 27,000 students, utilized an atypical in-depth selection process that went far beyond the standard two-hour interview of finalists.
The four shortlisted firms participated in a four-day compensated design charrette to demonstrate their skills, creativity, and problem-solving process.
“Wilson Butler was selected based
upon their strong understanding of the processes, development
of strong solutions, support of our constituents, and their connection with the community,” said university architect Jim Carroll. “Their work
designing performing arts centers, historic theaters,
academic art facilities, and high-tech entertainment venues is
nationally known, and our university team is enthused about achieving a very successful and transformative design that will draw on this diverse experience.”
Funding for the center will come in part from a donation made by John and Rosemary Brown, both Auburn University graduates. Approximately $25 million from the Browns’ gift will be dedicated to building the center. The remaining funds will be raised from additional donors.
When completed, the new 90,000sf performance center will serve as the cultural gateway to the university.
White Plains Hospital
A.P. Completes Hospital Project
White Plains, NY – A.P. Construction, headquartered in Stamford, Conn., has completed a building renovation and addition for the White Plains Hospital. This marked the second project that the company has completed for the hospital.
The $32 million project involved the construction of a new 38,000sf medical office, and significantly upgrading the first floor, front lobby, and façade of the cancer treatment center itself.
This six-story building more than
doubles the size of the hospital’s cancer facility to 70,000sf.
A new state-of-the-art pharmacy was constructed in the lower level of the new medical office building.
An existing four-story brick building was removed from the site at the location of the new structure.
During the past 20 years, A.P. Construction has completed over $150 million in healthcare construction projects in Connecticut and New York.
Next Issue – In print, blog, e-blast and online at www.high-profile.com
JulyFeatured Sectors:
• Healthcare• Life Science• Retail / Hospitality• Multi-Residential• Senior Living / Assisted Living• Corporate• Education• Green• Municipal• Awards• People• Calendar announcements
Send news submissions to:[email protected].
For advertisement prices and new media promotions call781-294-4530
Why keep a low profile?
Award Winners 2016Awards of facility design, and construction for 2016 featuring the most active of New England’s AEC industry associations and organizations including IFMA Excellence Awards, SMPS ROC Awards, CBC Project Team Awards, ABC safety awards and others. If your company has received recognition this year send HP editors the details for the July issue.
Be an award winning page sponsor with your advertisement!HP’s semi-annual focus on the award winning people and companies is a great place to place your advertisement.
Life Sciences FacilitiesHigh-Profile’s tri-annual focus on the design and construction of lab and pharmaceutical facilities with news and expert commentary in the field.
Deadline: Article submissions, ad reservations: June 24 Reserve your space now for best position
Featuring the Connecticut Building Congress Team Awards
www.high-profile.com
June 2016 51
New England’s Wide Format Specialists Since 1980. TOPAZ Engineering Supply, Inc. • 35 Pond Park Road, Hingham, MA
Call or e-mail TOPAZ today • [email protected] • www.topazeng.com
PROVIDING THE BEST SOLUTIONS FOR ALL YOUR DOCUMENT NEEDS
QUALITY PRODUCTS • ECONOMICAL PRICING • OUTSTANDING SERVICE!
WIDE-FORMAT HIGH-SPEED PRODUCTION COLOR PRINTS
EFFICIENT AND RELIABLE OFFICE DOCUMENT SOLUTIONS
WIDE-FORMAT PRODUCTIVITY AT AN AFFORDABLE PRICE
HP PAGEWIDE XL 8000 40”CALL OR EMAIL TODAY TO LEARN MORE.
HP DESIGNJET T2530PSCALL FOR SPECIAL PROMOTIONAL PRICING!
Copystar CS 2551ciCALL FOR SPECIAL PROMOTIONAL PRICING!
• Amazing Speed: 30 “D Size” Color Prints Per Minute• PageWide: 200,000+ Nozzles on a Stationary Pagewide Bar
• Print-Copy-Scan in Color • Only 21 Seconds Per Print! • 2 Rolls - Auto Switching• Low Cost Per Print
• Print-Copy-Scan up to 11” x 17”• Speed: 25 ppm (Color or B/W)• Paper Capacity: up to 4,100 sheets• Amazing Quality, Highly Efficient
CALL
TOPSELLERNEW NEW
AwardsAIANH Honors Kahn, KSC ProgramScholarship and High School Design Awards
Keene, NH – The New Hampshire Chapter of the American Institute of Architects and the Keene State College Architecture Department recently held its annual joint event to honor Dr. Jay V. Kahn and to celebrate the establishment of the AIA New Hampshire-Kahn Family Fund for the Advancement of Architecture.
In addition, scholarships and student design awards were presented.
The AIA New Hampshire-Kahn Family Fund is an endowment to support KSC architecture student study-travel opportunities by helping students study abroad and in the U.S., to expand their knowledge of architecture beyond New
Hampshire, and to be better prepared for their professional lives after graduation from KSC.
Winners: Hannah Cheneau, Kara Ammon, both from ConVal Regional High School Peterborough; Phil Martino, JT Cloutier, and Jarod Redfield, Monadnock Regional High; Brenna Whitney, Lindsay Woodward, and Hayden Pavao, Pinkerton Academy, Derry; and Patrick Chan, Salem High School.
Missing from the photo was Giuseppe Puglisi of Pinkerton Academy.
Jurors Susan Phillips-Hungerford AIA and Sheldon Pennoyer AIA review the Design
Competition models.
Amenta Emma Awarded by CREW
Hartford, CT – Amenta Emma’s CREC Discovery Academy project was awarded Best Specialty Project – Adaptive Reuse at the CREW CT Blue Ribbon Awards event in April.
Amenta Emma designers salvaged 48,000sf of an abandoned electric utility building and created a 19,000sf addition
to accommodate learning spaces, labs, and multipurpose space for a gymnasium, theater, and cafeteria.
The facility takes full advantage of natural light and emphasizes indoor-outdoor connections, aligned with the school’s STEM theme.
Discovery Academy
www.high-profile.com
June 201652
We are pleased to announce that our partners, Jerry Visconti & Dave Campbell are Co-Chairs of the firm’s Construction Practice Group.
1080 Main St. Pawtucket, RI 02860 • p: 401-272-1400 • f: 401-272-1403www.shslawfirm.com
CONSTRUCTION PRACTICE GROUP
We handle:• Construction Consulting• Contract Documents• Arbitration, Mediation,
Litigation• Mechanics Liens• Architects’ & Engineers’
Liability• Contractor Insolvencies• Suretyship
Group Members:Girard R. Visconti, Co-Chair David M. Campbell, Co-ChairRichard A. BorenChristian F. CapizzoThomas E. CarlottoPreston W. HalperinRandall L. SouzaMichael P. RobinsonJessica Papazian-RossDean J. Wagner
Girard R. Visconti, Co-Chair
David M. Campbell, Co-Chair
architecture planning interior design project visualization
781.848.6600 • www.rkbarch.com Zero Campanelli Drive, Braintree, MA10 Dorrance Street, suite 700, Providence, RI
creating design for industry
High-Profile: Awards
Shawmut Honored with IFMA Award
Boston – Shawmut Design and Construction recently announced that its work on Codman Academy’s Lithgow Building was awarded Best Practice – Small Project at the 13th Annual International Facility Management Association (IFMA) Boston Awards of Excellence: Building Innovation ceremony in May.
To renovate the historic 1899 Lithgow Building, Shawmut completed a 13,000sf fit-out of the space, integrating new systems in the historic building, mitigating acoustical challenges of the wood frame construction, and combatting floor-to-ceiling height issues to meet Massachusetts Historical Commission
requirements. The team also installed efficient lighting to maximize productivity and energy, enabling the project to achieve USGBC LEED Gold certification.
Shawmut’s scope of work included building out core classrooms; a special education classroom; library; art room; dance studio; administrative facilities; cafeteria; and multipurpose room. The team worked with Miller Dyer Spears to embellish the space with elements of nature — natural wood, exposed brick, twigs, and wooden benches — to create a nurturing and safe environment for students, and is considered to be one of the first trauma-informed designed schools in the country.
Award-winning Lithgow interior Codman’s Lithgow building interior view
Hartford, CT – The Connecticut Building Congress (CBC) announced the following winners for its 20th annual Project Team Awards:New Construction
Award of Merit: Tanger Outlets at Foxwoods, Mashantucket.
First Place: UConn Health Center Outpatient Pavilion & Parking Garage, Farmington.Major Renovation
Award of Merit: Jordan’s Furniture, New Haven.
First Place: Yale Center for British Art – Building Conservation Project, New Haven.Small Projects
First Place: Fairfield Preparatory College Student Life Center, Fairfield.
Award of Merit: New Milford Hospital Arnhold Emergency Department, New Milford.
Transportation/Utilities/Civil First Place: Rehabilitation of June
Road Bridge, Stamford.Award of Merit: Replacement of the
Old Main Street Bridge over Goff Brook, Rocky Hill.K-12 Schools
Award of Merit: Suffield Academy, Brewster Hall, Suffield.
First Place: CREC Discovery Academy, Wethersfield.
The Project Team of the Year will be kept confidential until it is announced at the awards banquet on June 14.
CBC Announces Team Awards
CMPAB Honors Tracey
Bristol, RI – TRAC Builders Inc. founder and president, Bill Tracey, was named Distinguished Person of the Year by the Roger Williams University Construction Management Professional Advisory Board (CMPAB) at the sixth annual Construction Management Alumni and Senior Dinner on April 29.
Roger Williams University presents the award to veteran construction profession-als who have helped strengthen the uni-
versity’s construction management (CM) program. The dinner gathers students, alumni, faculty, staff, and industry leaders to celebrate the university’s renowned CM program as well as the bright future ahead for the program’s 35 graduates.
As founding chairman of the CMPAB Alumni Committee and CMPAB board member, Tracey has played a pivotal role in the development of the CM program at the university.
(l-r) Roger Williams University President Donald J. Farish with TRAC founder and president Bill Tracy
www.high-profile.com
June 2016 53
PeopleKulchitskaya Joins TFMoranBedford, NH – TFMoran an-nounced that Natalia Kulchitska-ya, EIT, has joined the firm as a project structural engineer in its Bedford office. Her structural design experience includes steel and timber commercial and industrial buildings, steel tanks, and pressure vessels.
Previous work experience
includes research at the Water and Environmental Research and Transportation Centers at the University of Alaska.
While in Russia, Kulchitska-ya was the head of a university math department. She is famil-iar with REVIT, RISA 3D, SAP 2000, RAM Steel, SolidWorks,
AutoCad, MathCad, and Abaqus.Kulchitskaya
Sgroi Joins City Point PartnersBoston – City Point Partners announced that Joseph Sgroi, a 15-year veteran of the architec-ture/engineering/construction industry, has joined the company as its communications specialist.
Throughout his career, Sgroi has overseen an array of commu-nity outreach initiatives. Many of these initiatives were undertaken
while in his role as the chief of staff to State Representative William G. Greene, formerly the house chair of several legis-lative committees.
He has also developed public outreach strategies that engage a variety of constituents who are affected by public construction
projects.Sgroi
Specialty Glass
The Architect’s Choice for Quality
Showrooms Serving Springfield • Boston • Hartford CT
oasisshowerdoors.com • 800-876-8420
G l a s s I n n o v a t i o n
Award Winning Shower Enclosures
Specialty Interior Glass
Switchable Privacy Glass
Sliding Glass Partitions
Glass Wall Treatments
Glass Backsplashes
Beyondthe Bath
Oasis-High profile-btb.indd 1 5/25/16 11:24 AM
Cochrane Joins JewettRaymond, NH – Stacey Cochrane recently joined Jewett Construction Co., Inc. as its new company controller.
Cochrane brings some 18 years of financial experience to the Jewett team.
Cochrane
Kelliher Earns Architecture LicenseSpringfield, MA – Dietz & Company Architects, Inc. announced that Daniel “Jamie” Kelliher is now a licensed architect in the commonwealth of Massachusetts, bringing the firm to a total of eight licensed architects.
He joined Dietz in 2011. His experience includes work on a variety of educational and
housing projects including the UMass Center at Springfield and UMass Marketplace in Springfield, Mass. and the Park West Apartments in Vernon, Conn.
Prior to joining Dietz & Company, Kelliher worked as a design manager at the world-
famous Arcosanti project in Mayer, Arizona.
Kelliher
WSP|PB names Ng SupervisorBoston – Ying Ng has been named a senior supervising engineer in the Boston office of WSP | Parsons Brinckerhoff.
Ng has more than 20 years of experience in design, consulting, project management, project development, and site selection for energy projects
In his new position, he will be responsible for a range of tasks related to power project development.
Ng
www.high-profile.com
June 201654
Calendar
Send your event announcements to [email protected]
IFMAJune 21
IFMA Boston’s Annual Golf Classic Ready to break out the clubs and hit the course? Join us at Red Tail Golf Club in Devens! Red Tail is the top ranked course in Massachusetts and as a result all the foursomes were sold out in record time last year! It is a single course, so only 36 foursomes available this year. Act fast!More information contact: [email protected]; [email protected]; or [email protected];
IIDAJuly 28–29
20th DMI: Academic Design Management Conference Mass.College of Art and Design, Boston. The theme of the conference is “Design at the Inflection Point” and addresses the role of design research in the advancement of design practice. More information - iida.org
NAIOPJuly 26
NAIOP@ Night5:30 PM - 7:30 PM Coppersmith, 40 W 3rd St South Boston.Check out Coppersmith’s dynamic venue. Expand your network and develop valu-able business relationships, while enjoying some appetizers and cocktails. Open to all members of the Commercial Real Estate Industry. See more at: http://www.naiop-ma.org/events/NAIOP-Night--423/details#sthash.tPFlO53w.dpuf
MBCJune 27
Annual Golf OutingWollaston Golf Club999 Randolph Ave., Milton, Mass. 10:30am-12:30pm: registration, lunch,-driving range & putting green available 12:30pm: Shotgun start, 5:30pm: Reception, dinner, awards Register at www.buildingcongress.org
BSAJune 22
Meet the BSA Foundation 8:00 AM - 9:00 AMBSA Space, 290 Congress St. BostonOne hour “tour” of BSA Foundation pro-grams and why they matter. Event is free, but seats are limited. Reserve your space!For information: [email protected] or contact Penny Mitchell at [email protected]
USGBCJune 30
Design Charrette - Open to All6:00 PM - 7:30 PMJoin us for a design charrette on June 30th to brainstorm for our newest community service project: the transformation of a Boston classroom from status quo to super green. Please join us with your ideas, expertise, material donations or just a willingness to help out! RSVP to this event to receive updates on location and specific details. Register Now http://usgbcma.org/civicrm/event/register?id=1060&reset=1
SMPSJune 23
What is good business development? 4:00 PM - 5:45 PMUMass Club,1 Beacon Street, Boston (32nd Floor)In the eyes of an owner what differenti-ates an industry professional/confidante from an industry obligation? Join us for a lively, interactive, and informative discussion on business development best practices. After the program join SMPS for cocktails, networking, and light bites during our Mix @ 6.For info: http://smpsboston.org
BISNOWJune 21
Annual Future of Downtown7:30 AM Boston Seaport Aloft Mann Ballroom, 2nd floor 401-403 D St. BostonThe developers, investors and thought leaders who are shaping the skies and streets of beautiful downtown Boston will be with us to discuss the future of this magnificent part of America’s heritage. For more info: www.bisnow.com/events
Construction InstituteJune 22
Swing Into Spring Lyman Orchards Golf Center, 700 Main Street, Middlefield, Conn.Start the Summer Golf Season with the with the Construction Institute! This is a great opportunity to get on the course for a quick 9-holes to brush up your golf skills. Grab co-workers, clients or friends and make a foursome! Register early as we are limited to 44 golfers. This was a sold out event last year.http://construction.org/events
125125Promoting the Mechanical Contracting Industry for
Years
We off er membership within the Mechanical Contractors Association, Mechanical Service Contractors Association, and the National Certifi ed Pipe Welding Bureau. We support our member contractors through our educational seminars, labor and government relations, industry news and marketing. Committed to the future of our industry, we sponsor MCA student chapters at Northeastern University and Wentworth Institute of Technology in Boston. Our affi liation with the Mechanical Contractors Association of America and our strong, cooperative relationship with the United Association enable us to off er our members numerous opportunities to build lasting, benefi cial relationships with peers while acquiring the business knowledge and tools to keep their company successful.
125125617.405.4221 www.nemca.org @NewEnglandMCA
More details at architects.org/bsaspace290 Congress Street, Boston, MA 02210
Host your event at BSA Space
Host your event at BSA Space
www.high-profile.com
June 2016 55
R-29insulated concrete masonry wall system
Exterior Finishes: Ground Face, Polished, Shot Blasted or Satin Weathered
Off set cross webs and reduced web height: Reduce Thermal Bridging
Interior Finishes: Options Available EPS short foam:
Inserts overlap into the next block reducing the negative effects of thermal bridging
Remove EPS short foam inserts For Rebar & Grout per engineering
Middle Walls Improve Thermal Performance
At its core, Omni Block is a patented insulated masonry wall system that has been designed to take advantage of thermal mass and thermal lag principles in order to create a high energy efficient block wall system. This results in an Omni Block wall system with an R-Value of over 29 for a 12” block (U Factor of .034) and an R-Value of over 19 (U Factor of .051) for an 8” block. Omni Block has four main components; block, foam, rebar and grout. The blocks are installed the same way as standard CMU’s.
ExcEEd yOuR ExPEcTATIOnSOFFERInG cOMPlETE dESIGn FlExIBIlITy
3 layeRs of insulation!
Amazing
Wide variety of architectural finishes available Standard masonry engineering Reduces HVAC tonnage Qualifies for LEED credits Mold, wind, fire and sound resistant Exceeds The International Energy Conservation Code for R-Value requirements
The Same Combination Of Thermal Mass And Insulation with the look of BRICK!
new Half-High
For more information, samples or to schedule a 1-hour Omni Block “Lunch and Learn” please contact Bill at Genest Concrete. 1-800-649-4773 ext. 155 or [email protected] • www.GenestArchitecture.com
