high bandwidth ethernet solutions over bonded copper or fiber...

High Bandwidth Ethernet Solutions over Bonded Copper or Fiber to Replace Existing Legacy Products Manufactured Discontinued Products PairGain Campus Star PairGain Campus Cisco LRE Actelis Features: Very High Performance over bonded copper – Bonding up to 32 pairs with Actelis, offering up to 200 Mbps symmetric over bonded copper. PairGain Campus Ethernet solution caps out at 3 Mbps. High Density – Market leading density with Actelis. More than 40 pairs/sites per RU. Existing legacy solution typically cannot support more than 1.7 lines/customers per RU. High Reliability – Actelis solution provides fiber like reliability and service availability. Actelis advanced EFMplus technology enables service continuity even under multiple failure scenarios and extreme environmental conditions. High Flexibility – Actelis’ broad portfolio offers the flexibility to choose the best solution per your installation, budget and topology needs. Actelis solutions support 2, 4, 8, 16 and 32 pairs, a mix of interfaces - SHDSL, VDSL, Fiber, DS1, DS3 and a comprehensive set of network topologies – Point-to-Point, Point-To-Multi-Point, Ethernet/STP/RSTP Rings and Drop and Continue. Power and Data over the Same Lines - Actelis bonded copper solutions can deliver power + data to feed a remote unit and/or additional remote equipment – WiFi, Camera, Sensors … Actelis Official Solution Actelis ML230 Actelis ML600i Applications Everything moving to Ethernet - Actelis utilizes the “T1s” copper pairs to deliver significantly higher bandwidth – For Ethernet or Ethernet+ T1s services HVAC & Alarm Systems T1 Replacement Ethernet Extension Monitoring & Troubleshooting Actelis solutions are perfect cost effective, low bandwidth solution to low priority building where fiber is not an option. Actelis provides end to end monitoring for the entire network and a built-in TDR for locating faults in the copper pairs Fiber is the perfect solution but in today budget restrictions delay projects from getting done. The Actelis solution provide immediate solution with 10 to 200+ Mbps service. Technical Refresh Actelis is the ONLY DSL APPROVED SOLUTION on DoD APL (TN) 1823301 ML2300 – 256 Ports to a single or multiple uplinks ML230 – 128 Ports to a single or multiple uplinks ML600 CPE’s – Fit for any scenario/ application. 2, 4, 8 & 16 pair CPE’s delivering Ethernet, T1 or DS3 Portfolio

Upload: others

Post on 17-Jul-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

High Bandwidth Ethernet Solutions over Bonded Copper or Fiber

to Replace Existing Legacy Products

Manufactured Discontinued Products

PairGain Campus Star

PairGain Campus

Cisco LRE

Actelis Features:Very High Performance over bonded copper – Bonding up to 32 pairs with Actelis, offering up to 200 Mbps symmetric over bonded copper. PairGain Campus Ethernet solution caps out at 3 Mbps.

High Density – Market leading density with Actelis. More than 40 pairs/sites per RU. Existing legacy solution typically cannot support more than 1.7 lines/customers per RU.

High Reliability – Actelis solution provides fiber like reliability and service availability. Actelis advanced EFMplus technology enables service continuity even under multiple failure scenarios and extreme environmental conditions.

High Flexibility – Actelis’ broad portfolio offers the flexibility to choose the best solution per your installation, budget and topology needs. Actelis solutions support 2, 4, 8, 16 and 32 pairs, a mix of interfaces - SHDSL, VDSL, Fiber, DS1, DS3 and a comprehensive set of network topologies – Point-to-Point, Point-To-Multi-Point, Ethernet/STP/RSTP Rings and Drop and Continue.

Power and Data over the Same Lines - Actelis bonded copper solutions can deliver power + data to feed a remote unit and/or additional remote equipment – WiFi, Camera, Sensors …

Actelis Official Solution

Actelis ML230

Actelis ML600i

Applications

Everything moving to Ethernet - Actelis utilizes the “T1s” copper pairs to deliver significantly higher bandwidth – For Ethernet or Ethernet+ T1s services

HVAC & Alarm Systems

T1 Replacement

Ethernet Extension

Monitoring & Troubleshooting

Actelis solutions are perfect cost effective, low bandwidth solution to low priority building where fiber is not an option.

Actelis provides end to end monitoring for the entire network and a built-in TDR for locating faults in the copper pairs

Fiber is the perfect solution but in today budget restrictions delay projects from getting done. The Actelis solution provide immediate solution with 10 to 200+ Mbps service.

Technical Refresh

Actelis is the ONLY DSL APPROVED SOLUTION on DoD APL (TN) 1823301

ML2300 –256 Ports to a single or multiple uplinks

ML230 –128 Ports to a single or multiple uplinks

ML600 CPE’s – Fit for any scenario/ application. 2, 4, 8 & 16 pair CPE’s delivering Ethernet, T1 or DS3

Portfolio

Actelis Networks - Advanced Traffic · Available with front and rear access for International and North American markets, respectively, the ML2300 is the next generation of Actelis

Put it Down - Distracted Driving Campaign eblast volume 16 ...briefings.dadeschools.net/files/45437_PutItDown1.pdf · Put it Down - Distracted Driving Campaign eblast volume 16.1

High Performance - Actelis Networks€¦ · Corporate Headquarters Americas Sales Office 6150 Stevenson Blvd. Fremont, CA 94538, USA Tel. 1.866.ACTELIS Tel. 1.510.545.1045 Fax. 1.510.545.1075

EdTech Show Daily, Post Show ISTE eblast Issue

DSL Incoterms Chart - DSL Global Freight

Actelis Config Guide