grupo resa
TRANSCRIPT
Grupo Resa combines the global manufacture and support services to satisfy the customer's requirements and needs. It has developed a line of elevators aimed at solving the access problems of wind towers, tower cranes and other industrial installations.
Each manufacturing stage, from the reception of materials used, the finish of different products is subjected to exhaustive monitoring, culminating the process at our test benches, where the quality controls demanded by the current legislation for our products are performed.
Our reason of being is to provide customers with a service that always exceeds their expectations, with a professionalism that proves both the human and labour quality of our employees and an unimpeachable integrity.
The R-300 elevator incorporates a rack and pinion elevation system for a safe and reliable operation. A pinion is directly ducked to each drive reducer, assembled on the cabin. Each pinion engages with the mast rack allowing the cabin to go up and down, and stop the movement using electrical integrated disk brakes in each motor.
The elevation system through a rack and pinion system requires a minimal maintenance and is extremely safe, reliable and versatile.
Easy and safe to assemble and disassemble, without the need of external machinery. The assembly of the sections and the bracing to the facade is carried out from the upper floor of the cabin.
Designed and manufactured by Grupo Resa, the elevator is the result of many years of experience operating in all kinds of difficult access installations.
The safety characteristics and the efficient performance of Grupo Resa differentiate us from the rest. With integrated safety devices against excessive speed and the facility to reach and activate the manual descent, you can be absolutely sure of performing reliable and safe operations for many years.
RELIABLE ELEVATOR
ADVANTAGES OF THE RACK AND PINION SYSTEM
Maximum load capacity 240 Kg
Maximum number of people 2 people
Speed (up and down) 13 m/min
Useful area 0.6 m x 0.88 mCabin dimensions
Space requirement 1.12 m x 1.1 m
Cabin weight 500 Kg
Installation Indoor / Outdoor
Service, assembly, disassembly 55 Km/h
Out of service 125 Km/hMaximum wind speed
Maximum distance between anchorages 1.5 m
Length of the mast module 1.5 m
Weight of the mast module 25 Kg
Maximum height 120 m
Max. height above the last anchor
Possibility of adapting to special ties
CAPACITY, DIMENSIONS AND WEIGHTS
0.5 m
Construction, Industry ...
At Grupo Resa we provide integral technical assistance services and technical-commercial advisory services, in installations dedicated to the vertical transport of people and loads. We have a wide Network of branches, distributed throughout Spain and abroad, which make possible to provided fast, efficient and personalized services.
In-house highly qualified labour for the assemblies and risk prevention management.
Engineering and Innovation department:
- Manufacture engineering.- Execution of tailored-made projects to the Customer's needs. - Design of new products demanded by the Customer. - Technical definition of offers to Customers.
Our manufacture, storage and distribution plant makes our park one of the largest in Spain, providing the flexibility required to undertake all kind of projects.
The total and integrated management of our services as quality principle.
Commitment to safety and speed.
Risk coverage for customers.
S E R V I C E S
ManufactureR&D
Integral management
Assembly RentalSale Mast Climbing
Work Platform
Industrial ElevatorsTubular
Suspended platforms
The current demand for lifting systems is increasing in all types of industrial sectors, hence Grupo Resa has developed a line of elevators which is outstanding for its versatility, reliability and safety.
One of the fields of greater implementation are wind turbines, to perform inspection and maintenance tasks of these towers, to periodically access the gondola and transport two operators and their tools inside the tower.
A P P L I C A T I O N S
T E C H N I C A L
9
11
1
Two gear motors with electromechanical brakes
Emergency centrifugal brake
Manual emergency descent
Emergency stop Maneuvers validation system Control phases Low voltage electrical box Electrical manoeuvre at 24Vac Acoustic signal of movement Mast module >> Ladder
Top red mast with a 1/3 rack
Access doors with mechanical seal and door opening and closure detection
Emergency top or bottom electrical interlock output
Upper and lower limits position switch
Presence of rack position switch
Top rail
Cushions at the base
12
6
5
3
Ÿ Fully removable and modular.Ÿ Side door.Ÿ Overload system.Ÿ Floor calls.Ÿ Enclosure with electromagnetic safety interlocks of the base and access doors to plants.Ÿ Activation system through frequency converter.Ÿ Electronic positioning management.
ADDITIONAL - OPTIONAL DATA
SAFETY COMPONENTS
Cabin floor, wall and ceiling made of Plywood, non-slip and resistant to rot.
All elements are manufactured with high quality galvanized steel.
4
4
7
10
8
4
5
6
7
8
9
3
2
1
10
11
12
Our elevator has constant pressure controls which the operator uses both inside and outside the cabin to assemble the masts.
- Safety systems for door closing: they prevent the access of people to the service elevator area unless the elevator is in safe accessibility conditions. Moreover, the system guarantees the elevator cannot move at any time while the enclosing are open.
- Door locking systems: it uses a safety locking switch system during door closing.
- Floor calls - External controls: the elevator has controls for constant pressure or by pulse, which theoperator uses on each floor for loading and unloading.
- Multi-speeds: the user can lift up to 48 m/min in service and at 12 m/min during assembly.
- Floor recognition: the elevator is controlled by an electronic system that manages the operation and the recognition of the floor without having to install skids and position switches
- Overload floor system: includes elements that interrupt the operation in the case the user has exceeded the load capacity.
INTERNAL CONTROLS
Power - Frequency * 400V / 50Hz
Rated power 2 x 1,1 KW
Rated current 2 x 3 A
Supply cable 5 x 4 mm²
Cabin interior 13 m / min
Service Mode-Man Present
*Standard elevator with power 400V 50Hz, with possibility, upon request, of manufacturing it for any supply network.
ELECTRICAL SPECIFICATIONS
Therefore all the position switches installed on the elevator, are emergency switches or passive safety switches. A graphic touch matrix screen is supplied which indicates the floor we wish to go to and the floor where it is at the time. The plants are programmed from this terminal, elevating the machine and memorising its position.
OPTIONAL COMPONENTS
D A T A
G R U P O R E S A Área Empresarial Andalucía, Sector 1 :: C/ Serranía de Ronda, 6-8 :: 28320 Pinto, Madrid
Tel. +34 91691 8580 :: Fax. +34 91691 9512 / 9174gruporesa.com :: [email protected]
CÁDIZPolígono de Levante
C/ Alcalá de los Gazules 1, Oficina1.511001 Cádiz
Tel. 956 475 105
SAN ROQUEUrb. Las Lomas de la Pólvora, 75
11360 San Roque, CádizTel. 956 66 94 92
SEVILLAParque Empresarial Argentum
Edificio Delios 2ª planta, Mod. 1141909 Salteras, Sevilla
Tel. 955 980 536
HUELVAParque Huelva Empresarial, Parcela 4.10
21007 HuelvaTel. 959 540 321
BUCURESTISos. Garii Catelu Sector 3, nr. 246-248
Bucuresti, RomaniaTel. +40 21 256 13 70 / 72
GIBRALTARMain Wharf Rd.
P.O. Box 858Gibraltar, UK
Tel. +35 020 077 351
SAUDI ARABIAII Industrial Area, Abqaiq Road,
Halfmoon, Dammam,Kingdom Of Saudi Arabia
Tel. +966 03 812 6611
SALVADOR (BAHIA)Av. Sete de Setembro, 644, sala 204CEP 40060001, Piedade, Salvador
Tel. +55 71 3625 7800
r ainsing the worl dr ainsing the worl d