eparts catalog tutorial dd platform and mercedes-benz engines
TRANSCRIPT
0Daimler Trucks
eParts Catalog Tutorial
DD Platform and Mercedes-Benz Engines
Specifications are subject to change without notice. Detroit Diesel and the Spinning Arrows design are registered trademarks of the Detroit Diesel Corporation. Copyright ©
2009, Detroit Diesel Corporation. All rights reserved. Detroit
Diesel Corporation is a Daimler company.
eParts GuideTable of Contents
General eParts Topics:Navigating eParts
eParts Catalog Features and Functions
DD Engine Platform and MBE Engine Catalog Instruction
Aftertreatment Systems Overview
Full eParts Tutorial
Shopping Cart Function
Specific eParts Topics: Series 60 and DD Platform/MBE Catalog Structure Comparison
DD Platform and MBE Catalog Structure
DD Platform and MBE Design Group Structure
Design Group Key
How to find the Aftertreatment Assembly Number on Vehicles
How to find the Aftertreatment Assembly Number in PartsPro
eParts Aftertreatment Systems Updates
How to Login to eParts from DDCSN
How to Navigate from PartsPro to eParts Catalog
How to Navigate between Engine Series
Display Features
Contact Us
SAA Groups
Part Supersessions
Serial Number Breaks
Assembly and Sub Assembly Parts
Data Card Example
How to Look up MBE 900 and 4000 Aftertreatment Systems
How to Look up DD Platform Aftertreatment Systems
1Daimler Trucks
2Daimler Trucks 2
Purpose of New Tutorial
• In 2010 all Engines built by Detroit Diesel will follow Mercedes-Benz cataloging formats. This tutorial serves as your information bridge to these cataloging standards now implemented for DD Platform Engines.
• New Information Includes:
Enhanced Navigation
Key eParts Features and Functions
Detailed Information on Mercedes-Benz Cataloging Standards
Aftertreatment Devices (ATD)
Introduction
Main Menu
3Daimler Trucks 3
CONTACTS
• eParts catalog support, questions and concerns: [email protected] In addition, please e-mail any suggestions for eParts catalog enhancements. We appreciate all feedback and continue to optimize eParts for your use.
• Detroit Diesel Customer Support Center: 313-592-5800 or [email protected]
Introduction
Main Menu
4Daimler Trucks 4
Before you begin…• This Tutorial is a living document, updates and new information will be
added as required.
• Yellow Information Boxes and Red Arrows are located throughout the eParts catalog tutorial to highlight steps, provide tips and call attention to important information.
Important !
Introduction
FYI !
• The Tutorial often requires more than one slide to fully explain a concept. For this purpose a note indicating “Continued on next slide” will appear at the bottom of the slide where required.
• Clicking the Main Menu Link on the bottom left of each slide will return you to the Table of Contents (TOC) page.
Continued on next slideMain Menu
5Daimler Trucks 5
Table of Contents
• Section 1: Navigation
• Section 2: Catalog Features and Function
• Section 3: DD Engine Platform and MBE Catalog Instruction
• Section 4: Aftertreatment Systems
Introduction
Main Menu
7Daimler Trucks 7
• Login through DDCSN (Detroit Diesel Customer Support Network) website.• DDCSN, User ID and Password are required.
Section 1: Navigation
eParts Login Screen from DDCSN
1. Enter ID and Password
2. From DDCSN homepage select “Links” drop-down menu.
3. Select “eParts catalog”
Main Menu
Continued on next slide
8Daimler Trucks 8
Section 1: Navigation
eParts Login Screen from DDCSN
Watch for Important Announcements!
4. eParts Catalog Main Page display.
Main Menu Continued on next slide
9Daimler Trucks 9
eParts Login from PartsPro
Section 1: Navigation
1. Enter the last six digits of the Vehicle Identification Number (VIN).
2. Select “Major Components”
Continued on next slideMain Menu
10Daimler Trucks 10
eParts Login from PartsPro
3. Select the Engine Serial Number
4. Select “Retrieve”
Section 1: Navigation
Continued on next slideMain Menu
11Daimler Trucks 11
eParts Login from PartsPro
Section 1: Navigation
5. Link from PartsPro automatically opens eParts catalog to the engine serial number.
Main Menu
12Daimler Trucks 12
eParts Catalog Flowchart
Section 1: Navigation
Series 60 DD15, DD13 MBE
eParts Catalog
MBE DD15, DD13 Series 60
Select Category
Select
Group
Select
Sub-Group
View
Parts
Enter Engine Serial Number
Select
Design Group
Select
Sub-Group
View
Parts
Select
Design Group
Select
Sub-Group
View
Parts
Select
Model
Select
Design Group
Select
Sub-Group
View
Parts
Select
Category
Select
Group
Select
Sub-Group
Select
Model
Select
Design Group
Select
Sub-Group
View
PartsSelect
Type
View
Parts
*Step interchangeable.
*
SelectEngine Series
Serial Number Navigation Engine Series Navigation
Main Menu
13Daimler Trucks 13
Serial Number Navigation
Section 1: Navigation
1. Enter Engine Serial Number on eParts Catalog Main Page
2. Press “Enter” on your keyboard or click the blue button
Recent serial number searches are saved.
Simply select drop-down menu to view.
Main Menu Continued on next slide
14Daimler Trucks 14
Serial Number Navigation
Section 1: Navigation
3. Catalog displays Serial Number information.
Main Menu
15Daimler Trucks 15
Navigating by Engine Series (example: Mercedes-Benz)
Section 1: Navigation
1. Select MBE from the “Engines” drop-down menu on eParts Catalog Main Page.
Navigating by the Engine Serial Number (previous example) is the recommended method when using eParts Catalog. Navigating by the
Engine Series and Model are for reference to help identify parts.
Continued on next slideMain Menu
16Daimler Trucks 16
Section 1: Navigation
Navigating by Engine Series (example: Mercedes-Benz)
2. Select the required Mercedes-Benz Engine Series from the drop-down menu.
Continued on next slideMain Menu
17Daimler Trucks 17
Navigating by Engine Series (example: Mercedes-Benz)
Section 1: Navigation
3. Select the required Model from the drop-down menu.
Continued on next slideMain Menu
18Daimler Trucks 18
Navigating by Engine Series (example: Mercedes-Benz)
Section 1: Navigation
4. eParts Catalog displays the Model information.
Main Menu
19Daimler Trucks 19
Navigating by Engine Series (example: DD15)
Section 1: Navigation
1. Select DD15 from “Engines” drop-down menu on eParts Catalog Main Page.
All DD Platform Engine Series have Identical Navigation
Continued on next slideMain Menu
20Daimler Trucks 20
Navigating by Engine Series (example: DD15)
Section 1: Navigation
2. Select the required Model from the drop-down menu.
Continued on next slideMain Menu
21Daimler Trucks 21
Navigating by Engine Series (example: DD15)
Section 1: Navigation
3. eParts Catalog displays the Model information.
Main Menu
23Daimler Trucks 23
Display Features• eParts display can be optimized to fit your viewing requirements.
Section 2: Catalog Function and Features
Continued on next slideMain Menu
24Daimler Trucks 24
Display Features
Section 2: Catalog Function and Features
• Select “Hide Tree” to minimize navigational tree and increase the size of the image window.
Select “Show Tree” to return to the default display.
Main Menu
25Daimler Trucks 25
DD13, DD15 and MBE Image Toolbar Functions
Section 2: Catalog Function and Features
Scale picture to fit windowScale picture width to fit window
Scale picture to 100%Zoom
Zoom InPan Mode
Show or Hide all hotspotsVendor Link
Main Menu
26Daimler Trucks 26
Selecting Parts and Shopping Cart Function
• Parts have “hotspot” imaging callouts that automatically highlight the part and part number when selected.
Section 2: Catalog Function and Features
Move your curser over the desired part and “Click”.
Continued on next slideMain Menu
27Daimler Trucks 27
Selecting Parts and Shopping Cart Function
Section 2: Catalog Function and Features
1. Select “Add to Cart” to move selected item into the Shopping Cart
2. Shopping Cart will automatically display.
Selecting “X” does not delete recently added items.
It removes the display window and allows for continued
navigation through eParts.
Select “View Cart” at any time to bring back the Shopping Cart display.
Continued on next slideMain Menu
28Daimler Trucks 28
Selecting Parts and Shopping Cart Function
Section 2: Catalog Function and Features
• Shopping Cart toolbar allows you to Print, Add Items, Copy Items to Microsoft Excel and Remove Items.
• Editable Quantity
• List Price
• Extended Price
• Checking the “Remove Item” box and selecting “Remove” from the toolbar will remove selected part.
Continued on next slideMain Menu
29Daimler Trucks 29
Selecting Parts and Shopping Cart Function
Section 2: Catalog Function and Features
• Changing the Water Pump Quantity reflects in the Extended Price
Main Menu
30Daimler Trucks 30
Switching Engine Series Display
1. To instantly switch to another Engine Series select Engines dropdown.
2. Select required catalog (example: MBE)
Section 2: Catalog Function and Features
Continued on next slideMain Menu
31Daimler Trucks 31
Switching Engine Series Display
Section 2: Catalog Function and Features
3. New Catalog displays (example: DD15 to MBE).
Main Menu
33Daimler Trucks 33
DD15 Design Group and Series 60 Category Comparison
Section 3: DD Engine Platform and MBE Catalog Instruction
DD Platform and MBE have Identical Catalog Structures
Continued on next slideMain Menu
34Daimler Trucks 34
Catalog Structure (example: DD15)
• 92L is the DD15 Catalog Number.
• The Catalog Number is specific to the engine series.
• Numbers 01 through 49 are the Engine Design Groups
• Design Groups are a grouping standard established by Mercedes- Benz Engineering.
Section 3: DD Engine Platform and MBE Catalog Instruction
Continued on next slideMain Menu
35Daimler Trucks 35
Design Groups with associated Sub-Groups (example: DD15)
01 ENGINE HOUSING 01.005 DESIGN GROUP ORIENTATION TABLE 01.010 ENGINE 01.015 CYLINDER CRANKCASE,COVER,GASKET KIT 01.030 TIMING CASE 01.060 OIL PAN & OIL LEVEL DISPLAY 01.075 CYLINDER HEAD,VALVES,GASKET KIT 01.105 CYLINDER HEAD COVER 03 MOVING PARTS 03.015 CRANKSHAFT AND FLYWHEEL 03.045 CONNECTING ROD AND PISTONS 05 ENGINE TIMING 05.015 CAMSHAFT AND TIMING PARTS 07 INJECTION SYSTEM 07.020 HIGH-PRESSURE PUMP 07.090 FUEL LINES 09 FUEL FILTER AND TURBOCHARGER 09.030 FUEL FILTER 09.075 TURBOCHARGER 13 AIR COMPRESSOR 13.030 AIR COMPRESSOR
14 INTAKE AND EXHAUST MANIFOLDS 14.015 INTAKE MANIFOLD 14.090 EXHAUSTGAS RECIRCULATION 15 ENGINE ELECTRICAL EQUIPMENT 15.010 ENGINE ELECTRICAL EQUIPMENT 15.030 ALTERNATOR 15.045 ATTACHMENT PARTS USED FOR ALTERNATOR 18 ENGINE LUBRICATION 18.015 OIL PUMP 18.045 OIL FILTER AND OIL COOLER 18.060 OIL LINES 20 ENGINE COOLING 20.015 WATER PUMP 22 ENGINE ACCESSORIES 22.015 ENGINE SUPPORTS AND ATTACHMENT PARTS 23 POWER STEERING PUMP 23.015 POWER STEERING PUMP 23.075 A/C COMPRESSOR 49 EXHAUST GAS AFTERTREATMENT 49.100 PARTICLE FILTER SYSTEM
Section 3: DD Engine Platform and MBE Catalog Instruction
Continued on next slideMain Menu
36Daimler Trucks 36
Complete Design Group and Sub-Group Reference
Section 3: DD Engine Platform and MBE Catalog Instruction
Continued on next slideMain Menu
37Daimler Trucks 37
SA Groups
• SA Groups are also referred to as “Z” or “SAA” Groups.
• Functional Description: Parts List Variant; The DD13, DD15 and MBE Bill of Material or “Data Card” is comprised of SA groups specific to the engine serial number.
• SA Group Layout (example): 537075 01
Fun Fact: SAA is an acronym for the
German Term: Jondes-
Ausfuhrungsnrten
Parts List
Type of Variant
Section 3: DD Engine Platform and MBE Catalog Instruction
Continued on next slideMain Menu
38Daimler Trucks 38
SA Groups (example: DD15 Water Pump Assembly)
• In this example the Water Pump, Gasket and Bolt are All contained within SA 53703714.
• Attaching part used in two different SA groups. Note the different variant numbers: 01 and 02 .
Section 3: DD Engine Platform and MBE Catalog Instruction
Continued on next slideMain Menu
39Daimler Trucks 39
SA Groups (example: DD15 Data Card)
Design and Sub-Groups SA Groups 01 Engine Housing / Engine Case 09 Fuel Feed Pump / Pressure Pump / 18 Oil Pump / Lubricating Line
Cylinder Crankcase 53700003 Sender Unit 53701501 Oil Pump 53700603Cylinder Head 53700103 Exhaust Gas Turbocharger 53702706 Locking Parts 53702801Injector Nozzle 53700301 Fuel Filter 53703805 Locking Parts 53702808
Oil Spray Nozzle 53700501 Shield Plate 53706601 Oil Filter 53703714Cylinder Head Cover 53700703 Power Turbine For Exhaust Gas Energy Usage 53708901 Oil Supply Unit 53705106
Timing Case 53700803 Transmission and Clutch for Exhaust Gas Energy Usage 53709001 Oil Line - Exhaust Gas Turbocharger 53705206Crankcase Cover 53701003 Exhaust Lines for Exhaust Gas Energy Usage 53709103 20 Engine Cooling
Sender Unit 53701501 Air Intake Pipe 53710002 Sheave Pulley 53701101
Locking Parts 53702801 13 Air Compressor Thermostat 53701601Locking Parts 53702808 Air Compressor 53700402 Oil Filter 53703714
Guide Tube - Oil Dipstick 53702906 Locking Parts 53702801 Cooling Water Outlet 53704202Oil Dipstick 53703006 Locking Parts 53702808 Belt Tightener 53706801
Cylinder Crankcase Breathing 53703101 Coolant Line 53705803 Coolant Collecting Pipe 53709206Engine Plate 53704704 14 Intake Manifold / Exhaust Manifold & EGR 22 Engine Suspension / Engine Accessories Engine Plate 53704707 Sender Unit 53701501 Suspension Eye 53704401
Oil Pan 53705003 Charge Air Elbow 53703203 Engine Support 53705406Cylinder Head Gasket 53707203 Exhaust Manifold 53703306 49 Exhaust Gas Aftertreatment
Camshaft Housing 53710503 Shield Plate 53706601 Particulate Filter System 53711107Engine Brake Solenoid Valve 53711501 Control, EGR 53707001
03 Moving Parts / Engine Components Radiator, EGR 53707303Vibration Absorber 53700903 Lines, EGR 53707403
Flywheel 53701906 Cold Boost Air Pipe 53708003Piston 53702203 Air Preheating Intake 53708202
Connecting Rod 53702303 Metering Device 53709301Main Bearing Parts Kit 53702403 15 Electrical Equipment in engine
Crankshaft 53702503 Unit Support 53701801Basic Gear Drive 53707603 Engine Control Unit 53704001
Connecting Rod Bearings 53709803 Cable Harness (Wiring Harness) 53706203
05 Timing / Timing and Chain Drive Basic Gear Drive 53707603
Gear Drive, Special Installations 53707804 Camshaft Housing 53710503
07 Injection Pump Fuel Distributor 53701403
High Pressure Fuel Lines 53704603Low Pressure Fuel Lines 53706005
High Pressure Pump 53707501
Reference Only; Not Available in eParts
Section 3: DD Engine Platform and MBE Catalog Instruction
Main Menu
40Daimler Trucks 40
Part Supercession
• Part Supercession details are listed in the footnotes underneath the part number.
• In this example three cylinder heads are superseded within the same SA Group (53700103).
Section 3: DD13, DD15 and MBE Catalog Instruction
Main Menu
41Daimler Trucks 41
Part Supercession with Serial Number Breaks
• “BIS MOTOR 004462” Translated: “To Engine 004462”. Exhaust Manifold piece in example has usage to engine: 472901S0004462.
• “AB MOTOR 004463” Translated: “From Engine 004463”. Exhaust Manifold piece in example has usage from engine: 472901S0004463.
• Serial number in example: (472901S0007200), requires part number A4721420901 for service.
Section 3: DD Engine Platform and MBE Catalog Instruction
Main Menu
42Daimler Trucks 42
Assembly & Sub Assembly Components
• Not all component parts of assemblies have callouts or display in the image.
• Assembly components are denoted with a colon ( : ) prefix under the assembly part number.
• Sub-Components of these assembly components are denoted with a double colon ( :: )
Section 3: DD Engine Platform and MBE Catalog Instruction
Main Menu
44Daimler Trucks 44
Aftertreatment System Cataloging
• The Series 60 Catalog lists all DD Platform and MBE Aftertreatment Assemblies released by Detroit Diesel.
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
45Daimler Trucks 45
• Obtain the ATD Assembly Number before using the Series 60 Catalog to look up ATD information.
• The ATD Assembly can be obtained from the PartsPro system or the physical Tag attached to the ATD on the Vehicle.
• Using the Series 60 Catalog to access MBE Aftertreatment information is the current process.
• A portion of DD Platform Aftertreatment Assemblies are associated with the engine serial number. These can be accessed by navigating eParts using the engine serial number. If the Aftertreatment information is missing, obtain the ATD Assembly number and follow the process outlined for looking up MBE Aftertreatment information.
Aftertreatment System Cataloging
Section 4: Aftertreatment Systems
Main Menu
46Daimler Trucks 46
ATD Assembly Number Locations (Vehicle ATD TAG)
Section 4: Aftertreatment Systems
Main Menu
47Daimler Trucks 47
Aftertreatment Assembly Number Location (PartsPro)
1. Enter last six digits of the Vehicle Identification Number (VIN)
2. Select “Retrieve Design Group”
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
48Daimler Trucks 48
Aftertreatment Assembly Number Location (PartsPro)
3. Design Group screen display
4. Select Design Group 49 “Exhaust”
5. Select “Retrieve Design Subgroup”
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
49Daimler Trucks 49
Aftertreatment Assembly Number Location (PartsPro)
6. Design Subgroup screen display
7. Select Muffler/ DPF ATD
8. Select “Retrieve Parts List”
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
50Daimler Trucks 50
Aftertreatment Assembly Number Location (PartsPro)
9. Screen defaults to “BOM Footnote” Tab
10. Select “Bill of Materials” Tab
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
51Daimler Trucks 51
Aftertreatment Assembly Number Location (PartsPro)
11. Bills of Material screen display
12. ATD Assembly Number display
13. “DBZ” prefix for ATD Assembly Number is specific to PartsPro and is not recognized within eParts Catalog.
Section 4: Aftertreatment Systems
Main Menu
52Daimler Trucks 52
Current Process for Accessing MBE 900 and 4000 Aftertreatment Information
1. Open Series 60 Catalog from the Engine drop- down menu.
Do NOT Enter an Engine Serial Number
X
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
53Daimler Trucks 53
2. Select 06 “Exhaust System”
3. Select 6.2B “Aftertreatment Systems”
4. Select 6.2B600 “Filter Assembly, Particulate (ATD)”
5. All ATD Assemblies released by Detroit Diesel appear
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Current Process for Accessing MBE 900 and 4000 Aftertreatment Information
54Daimler Trucks 54
6. Select ATD Assembly Number obtained from PartsPro or the Vehicle. (example: A6804901592)
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Current Process for Accessing MBE 900 and 4000 Aftertreatment Information
55Daimler Trucks 55
7. ATD image and all serviceable components display.
Select Callout to highlight item in Parts
List and for adding items to shopping cart
Section 4: Aftertreatment Systems
Main Menu
Current Process for Accessing MBE 900 and 4000 Aftertreatment Information
56Daimler Trucks 56
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
1. Enter Engine Serial Number.
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
57Daimler Trucks 57
2. DD15 catalog opens and displays the engine serial number information.
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
58Daimler Trucks 58
3. Select 49 “Exhaust Gas Aftertreatment”
4. Select 49.100 “Particulate Filter System”
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
59Daimler Trucks 59
5. ATD Assembly Number (Particulate Filter) displays.
Ignore All parts listed under the ATD
Assembly (Particulate Filter) Number.
If ATD Assembly (Particulate Filter) Number does not
display, please obtain ATD Assembly Number
from Vehicle or PartsPro and follow current MBE
process.
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
60Daimler Trucks 60
6. Select ATD Assembly Number (Particulate Filter) obtained in Parts List (example: A6804901592)
Section 4: Aftertreatment Systems
Continued on next slideMain Menu
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
61Daimler Trucks 61
7. ATD image and all serviceable components display.
Section 4: Aftertreatment Systems
Main Menu
Accessing DD Platform Aftertreatment Systems: Serial Number Navigation (example: DD15)
62Daimler Trucks 62
Contact Information
• We appreciate your feedback! Please e-mail questions, comments or topic suggestions for future tutorial updates to:
Tutorial Contact Information
Main Menu
eParts Guide forDD Platform and MBE Engines
End of Tutorial Thank You !
Specifications are subject to change without notice. Detroit Diesel and the Spinning Arrows design are registered trademarks of the Detroit Diesel Corporation. Copyright ©
2009, Detroit Diesel Corporation. All rights reserved. Detroit
Diesel Corporation is a Daimler company.
Main Menu