Network Fiber Modules 5080 sIndustry, Inc.Building Technologies Division s DataSheetFireSafety &Security ProductsMXL/MXLV[withFireFinder TM XLS]Network Fiber ModulesModels D2300CPS and D2325CPS Product Overview The Siemens Fire Safety Models D2300CPS (multi-mode) and D2325CPS (single-mode) fiber-optic interface modules can be used to transmit RS-485 communication between FireFinder XLS and MXL intelligent, addressable fire-alarm control panels ─ which includes H-Net communication between FireFinder XLS main and remote panels; M-Net communication between MXL main and remote panels; and X-Net communication between MXL or FireFinder XLS panels. Models D2300CPS and D2325CPS can act as either a repeater or an end-point unit. The fiber-optic interface modules are powered by 24VDC from the fire-alarm control panels. Models D2300CPS and D2325CPS can be powered from the Model PSC-12 power supply or Model PSX-12 power supply extender when used with the FireFinder XLS. When used with the MXL system, Models D2300CPS and D2325CPS can be powered from Model MMB-2, Model MMB-3 or Model PSR-1. The fiber-optic interface modules can also be powered by Model PAD-3 or Model PS-35. Specifications Using the model D2300-MP mounting plate, two (2) Models D2300CPS and D2325CPS modules can be mounted in any FireFinder XLS CAB-series enclosure. For the MXL, up to two (2) Model D2300CPS or Model D2325CPS modules can be mounted in any MXL enclosure that will accept a given Model MOM-4, using the Model MXL-MPFO mounting plate. When using System 3 TM -style rails that mount on the MXL’s Model MBR-2 or Model MME-3 backbox, Model MSR-1. Model D2300CPS or Model D2325CPS can also be mounted with the System 3 bracket, Model MPFO. Up to three ( 3) brackets can be installed on a single rail. The Model D2300CPS module can also operate in either a daisy chain or star configuration, allowing for network configurations that are not possible with RS-485 networks alone. The connection between the Model D2300CPS modules uses two (2), high-quality duplex 50/1 25 or 62.5/1 25 fiber-optic cables and ST-style fiber connectors. The duplex fiber-optic cable has two (2) cables in a single shield similar to an electrical z ip cord. Each segment of the fiber network can be up to 1.9 miles. The connection between the Model D2325CPS modules uses two (2), high-quality duplex 9/125 fiber optic cables and ST-style fiber connectors. The duplex fiber-optic cable has two (2) cables in a single shield similar to electrical zip cord. Each segment of the fiber network ca n be up to 10 miles. •Works with H-Net, M-Net, or X-Net •Style 4 or Style 7 Communication •Uses multi-mode or single-mode optical fiber pairs •Power provided by the fire-alarm control panel •Acts as network repeater •Daisy-chain or Star configurations •UL 864 9 th Edition Listed, ULC Listed ARCHITECT AND ENGINEER SPECIFICATIONS
