BRANDT™ SABRE™Modular Shaker System

Reduce downtime and increase capacity with the first modular shaker system.

The BRANDT SABRE shaker system represents an industry revolution. The first of its kind, SABRE is a modular shaker system based upon a scalable platform that can easily be changed from a single deck to a double deck and from a double deck to a triple deck shaker. This simple upgrade can be made in the field, eliminating the need to change out the complete shaker system and allowing SABRE to be easily adapted to customer specific needs.

Field tests have shown 1.5-2X fluids handling capacity in comparison to existing high-performance shakers. This performance advantage enables SABRE to better control low-gravity solids (LGS) throughout the entire drilling process thereby reducing dilution and associated logistics costs.

This is due in part to SABRE’s robust and differentiated design. With the drive assemblies mounted directly over the side walls of the basket, this allows for better energy transfer to the screens. SABRE’s G-force is set at 7G with the counterweights adjustable to compensate for increasing the number of decks. These design features make SABRE a more potent primary screening system than any other in the industry.

The SABRE shaker has also proven to deliver dryer cuttings compared to other high-performance shakers. In the latest field runs, SABRE consistently reduced oil Retention On Cuttings (ROC) from around 11% to below 9%, reducing both haul-off and disposal costs.

For operators whose drilling application requires the retention and recovery of costly LCM or wellbore stabilization materials, SABRE’s triple deck configuration can be setup to retain these particles and reintroduce them into the fluid system, while STILL removing unwanted LGS.

Besides increased performance, improved safety, ease of use and durability were principal factors in the design of the SABRE shaker. SABRE screens are super-lightweight (weighing in at only 14 lbs) and are repairable using NOV’s unique AX SNAPFAST™ screen repair system. The screens are secured and sealed using NOV’s industry-proven pneumoseal technology. Screen changes have been made simpler and safer as the screens can be quickly changed out by a single operator, from the front of the shaker, in a matter of minutes.

For drilling rigs equipped with KING COBRA VENOM™ or HYBRID shakers, SABRE can be retrofitted into the existing skids, further reducing upfront costs and installation time.

SABRE with two deck option.

SABRE with three deck option.

wellsiteservices@nov.com nov.com

Basket OptionsSingle Deck Double Deck Triple Deck

Screen Configuration Single Deck Double Deck Triple Deck

Screen SABRE Pre-tensioned

Screen Clamping Pneumatic (5.5-6.2 Bar / 80-90 PSI)

Screen Angles 6°

Angle Adjustment +6° (Standard)+6° to 4° (Optional)

Total Screen Area 30 ft² (2.78 m2) 60 ft² (5.57 m2) 90 ft² (8.36 m2)

Operating Modes Single Deck Screening Dual Deck - In Series Triple Deck - In Series

Power Consumption 8.0 kW Max

Recovery Option N/A N/A Sized Solids Removal

Dry Operating Weights and DimensionsSingle Deck Double Deck Triple Deck

SABRE Shaker Option Weight 2160 kg / 4762 lb 2533 kg / 5584 lb 2906 kg / 6406 lb

Length 3068 mm / 120.8 in 3068 mm / 120.8 in 3145 mm / 123.8 in

Width 1928 mm / 75.9 in 1928 mm / 75.9 in 1928 mm / 75.9 in

Height 1562 mm / 61.5 in 1562 mm / 61.5 in 1562 mm / 61.5 in

Weir Height 980 mm /38.6 in 980 mm /38.6 in 1118 mm / 44 in

SABRE Retrofit Option(less skid)

Weight 1540 kg / 3395 lb 1754 kg / 3866 lb 1967 kg / 4337 lb

Length 2629 mm / 103.5 in 2629 mm / 103.5 in 2705 mm / 106.5 in

Width 1928 mm / 75.9 in 1928 mm / 75.9 in 1928 mm / 75.9 in

Height 1290 mm / 50.8 in 1290 mm / 50.8 in 1290 mm / 50.8 in

wellsiteservices@nov.com nov.com

National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the user’s risk and are the user’s responsibility.

© 2018 National Oilwell Varco - All Rights ReservedD8C1005324-MKT-001 Rev. 04

Corporate Headquarters7909 Parkwood Circle Drive Houston, Texas 77036 USA

Phone: 713 375 3700 Fax: 713 346 7687

WellSite Services Headquarters2800 N Frazier Street Conroe, Texas 77303 USA

Phone: 936 523 2600 Fax: 936 523 2791