base 1
DESCRIPTION
design of base plateTRANSCRIPT
www.hilti.com.sg Profis Anchor 2.5.2
Input data and results must be checked for agreement with the existing conditions and for plausibility!PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:Specifier:Address:Phone I Fax:E-Mail:
|
Page:Project:Sub-Project I Pos. No.:Date:
6
5/16/2015
Coordinates Anchor [mm]
Anchor x y c-x c+x c-y c+y1 -1 -135 - - - -2 95 -96 - - - -3 135 -1 - - - -4 96 95 - - - -
Anchor x y c-x c+x c-y c+y5 1 135 - - - -6 -95 96 - - - -7 -135 1 - - - -8 -96 -95 - - - -
8 Installation dataAnchor plate, steel: S 355 (St 52); E = 210000.00 N/mm2; fyk = 355.00 N/mm2 Anchor type and diameter: HIT-RE 500 + HIT-V (5.8) M16Profile: Pipe; 140 x 140 x 10 mm Installation torque: 0.080 kNmHole diameter in the fixture: df = 18 mm Hole diameter in the base material: 18 mmPlate thickness (input): 16 mm Hole depth in the base material: 217 mmRecommended plate thickness: calculated Minimum thickness of the base material: 253 mmCleaning: Premium cleaning of the drilled hole is required
8.1 Recommended accessories
Drilling Cleaning Setting• Diamond core rig • Compressed air with required
accessories to blow from the bottom of the hole
• Proper diameter wire brush
• Dispenser including cassette and mixer• Torque wrench
1
2
3
4
5
6
7
8
40 39 1 94 2 94 1 39 40
4039
194
294
139
40
x
y
175 175
175
175