april 2014 pipe system brochure & price list - maincor · pre-insulated pipe heating...

Pre-Insulated

Pipe

Heating

UnderfloorHeating

Plumbing

Radiator

April 2014Pipe System Brochure & Price List

Plumbing, Radiator Heating, Underfloor Heating, Pre-Insulated Pipe

Visit our website at www.maincor.co.uk

• Find your local representative

• Find your nearest stockist

• Up to date product information

• Latest Maincor news

Maincor Warranty

Maincor Multilayer composite pipe systems with press and compression fittings

For a period of ten years Maincor will replace:

1) Maincor pipe systems which demonstrate defects that shall be shown to derive from production or material defects attributable to the negligence of the manufacturer.

2) Damage caused to the property of third parties by Maincor product defects.

3) The expenses of third parties emanating from the removal, disassembly, acceptance or uncovering of defective Maincor products and caused by the installation and laying of defective Maincor products delivered by Maincor.

The guarantee shall extend to all Maincor system parts, such as pipes and fittings, where Maincor has made the delivery.

No guarantee shall be accepted for laying and installation errors.

The technical documentation and instructions for use shall be decisive.

Maincor Rohrsysteme GmbH & Co. KG Silbersteinstrasse14 D-97424 Schweinfurt Germany

3

Maincor Price List 2014 | C

ontents

Tel: 01455 555930 Web: www.maincor.co.uk Maincor Ltd reserves the right to alter specification without notice.

Company Overview 4 - 5

Maincor Systems Overview 6

Pipe Systems 7 - 9

Press Fittings 9 - 13

Additional Fittings and Accessories 13

Maincor Multi-Fit 14

Plumbing & Heating Manifold Systems 15 - 17

Underfloor Heating Introduction 18 - 20

Underfloor Heating Systems 21 - 22

Underfloor Heating Controls 23 - 24

Underfloor Heating Accessories 25 - 26

Low Profile Overlay Systems 27

MainDeck Systems 28

Underfloor Heating Single Area Packs 29

Tools 30 - 32

Pre-Insulated Pipe Systems 33

Design Guides 34

Terms and Conditions 35

contents

All prices quoted in this price list exclude VAT which shall be charged at the current rate.

E and O E.

4


omp

any Overview


about MaincorMaincor Ltd is the sales and distribution partner - for the UK, Ireland and the Channel Islands - of the Maincor Group based in Germany. Maincor Ltd has its offices and warehouse in Lutterworth, Leicestershire, at the centre of the UK and the heart of the motorway system.

Maincor manufactures and compiles pipe systems for plumbing, heating, underfloor heating, as well as specialist pipe products for boiler and white goods manufacturers.

Maincor specialises in innovative plumbing solutions and underfloor heating, using multilayer composite pipe (MLCP) for the most part, but there is also a PE-RT product offering. Maincor systems are suitable for all types of building applications, from small conservatory extensions, to new build housing developments, through to large commercial projects; there is a product range to suit most requirements.

Maincor products have the required UK WRAS approvals and many products also have international approval. The company is a member of UHMA (the Trade Association for Surface Heating and Cooling) and works with CIBSE (Chartered Institution of Building Service Engineers), BSRIA (Building Services Research and Information Association) and IDHEE (Institute of Domestic Heating & Environmental Engineers) and CIPHE (Chartered Institute of Plumbing Engineers).

The core principle of Maincor is customer satisfaction through unrivalled technical support and delivery into the market place and the Company works hard to continually improve these values.

Peace of Mind With MaincorThe principle reassurance that any company brings to its customers comes from its place in its industry.

Maincor supplies a member to the management committee at the UHMA (the Trade Association for Surface Heating and Cooling) and also a member to the BEAMA Underfloor Heating Forum; it is a member of BSRIA (the Building Services Research and Information Association); it supplies a member to the CIBSE Domestic Heating Design Panel (Chartered Institution of Building Service Engineers) and has supplied occasional representatives to the Government’s Industry Compliance Forums for developing building regulations and the Green Deal.

The technical department at Maincor qualifies its advice and training by adherence to the HNC Building Services Engineering Standard, CIBSE design guides and the BPEC (British Plumbing Employers Council) underfloor heating training courses.

5


omp

any Overview


Maincor Values

1. Maincor products are competitive. Competitive pricing

means lower inventory costs and better margins for its

customers.

2. Maincor is an innovative manufacturer and has won

Germany’s “Top Innovator” award. This means that there

is always something new available to separate it from its

competitors.

3. The Maincor Manufacturer Warranty is superior to many

leading brands. Maincor has real confidence in its products

and it shows in what it offers.

4. The Maincor design and support service provides a real

edge. Maincor produces designs, quotations, material

schedules, offers a hotline service, field support and training.

It has some of the shortest quote turnarounds in the industry

and if you’ve got a panic, responds right now! - The service

kicks in as soon as you call. All Maincor phones are answered

by a human being, not by “press one for, press two for” etc.

5. Compatibility - Merchants, installers and users alike can

benefit from Maincor’s unique approval compatibility.

Maincor was the first manufacturer of multilayer pipe to not

only gain approval for its own pipe and fittings, but also with

the fittings of another leading brand. That’s peace of mind!

6. Maincor products are among the highest quality in the

industry and Maincor not only makes its own pipe, but also

the machines that make the pipe. Maincor is so proud of its

factories that visitors are very welcome. Maincor also makes

products for some other leading brands, so even if Maincor is

new to you, if you use MLCP, you may have already used one

of its products. Multilayer pipe is formstable, has the lowest

expansion rates of any plastic pipes, is gas tight and meets the

high standards of approval for the UK.

7. Orders are picked and despatched on the day of order.

Exceptional Maincor service as standard: 98% of all orders

for stock items, required for immediate delivery, are picked,

packed and despatched on the day of order.

8. Developing Building Regulation is going to require ever

increasing use of renewable energy. Maincor has a resident

renewable energy specialist to ensure that systems are

correctly designed to give the best performance.

9. The Maincor team has experience back to the very roots

of multilayer pipe systems in the UK and supports the CIBSE

standards for the design and installation of plumbing, central

heating and underfloor heating. Maincor also supports the

trade institutes listed on the back page.

10. Maincor - Innovation reduced to easily installable plumbing

and heating!

The core principle of the whole Maincor Group is customer satisfaction and here in the UK our company values reflect this:

Knowledge The experienced team has a large amount of knowledge of the Maincor products, the industry and project requirements and is available on the phone (01455 555930) or by email at [email protected].

Compatibility Maincor was the first multilayer pipe manufacturer to gain WRAS approval compatibility for its products with products of other manufacturers, thus setting new standards and giving protection if products are mixed on site.

Reliability Maincor prides itself in offering reliable products, and to back this up, has a 10 year insurance backed warranty, the content of which is superior to many leading brands.

Innovation Maincor is always developing and, apart from Maincor patents, compiles fittings, controls and system parts to give its customers the solutions they need. For example, in 2013 we launched the class-leading LOGSTOR flexible pre-insulated pipe system, to which we have already added an improved fitting system.

Support The priority of Maincor is its customer support. Help is available every step of the way with projects, from quotation, drawing and design, through to visits on site and installer training.

Maincor offers a nationwide service for its customers and its products can be purchased through most of the national plumbing merchants, a number of quality regional groups, as well as good independent outlets. To find your nearest stockist, visit the Maincor website at www.maincor.co.uk and enter your postcode in the ‘Find a Stockist’ tool.

Where to buy Maincor

Why Maincor?

6

Maincor Price List 2014 | System

Overview


Maincor systeMs

Pre-Insulated Pipes Whilst providing efficient transfer of hot and cold water between buildings, pre-insulated pipes are especially suited for the transfer of hot water from heat pump or biomass systems.

Sophisticated Controls Using a wide range of wired and radio controlled systems, including app enabled technology, means that room temperatures can be individually controlled, allowing for maximum flexibility, whilst increasing the energy efficiency of the building.

Underfloor Heating Systems UFH is suitable for a wide range of floor constructions, on both ground and upper floors. Using Maincor controls, manifolds, 12mm, 16mm or 20mm pipes and accessories, it is simple to create individual heating systems with the comfort required. UFH can be easily combined with radiator systems for extensions and conservatories, or to create a mixed heating system offering radiators on upper floors if required.

Maincor offers complete systems solutions:

Radiator Manifold Systems This system offers simple radiator isolation and, with no joints in the building fabric, a much reduced chance of leakage. The Maincor range of system controls allows for improved comfort levels and increased energy efficiency.

Manifold Plumbing Systems With simple individual isolation of appliances, a manifold plumbing system provides a safe, secure and easy plumbing solution.

There are no joints within the building fabric which reduces the chance of leakage and gives fast and easy installation. MLCP is available in sizes 12 - 63mm, in coils up to 32mm and straight lengths from 16-63mm. A wide range of press and compression fittings are available to suit.

7

Maincor Price List 2014 | Pip

e Systems &

Fittings


PiPe systeMs

Outer Layer: Polyethylene raised temperature (PE-RT) plastic coat: protects the aluminium core and allows the outer shell to be coloured without contaminating the water.

Adhesive layer: interface zone between the outer PE-RT layer and the aluminium core. Bonds the materials together and prevents shear slippage.

Aluminium layer: thin layer of overlap welded aluminium which forms a 100% oxygen barrier to protect against corrosion and allows the pipe to have the ‘formstable’ characteristic.

Adhesive layer: interface zone between the inner PE-RT layer and the aluminium core. Bonds the materials together and prevents shear slippage.

Inner layer: inner layer of clear PE-RT. Inert and does not affect the water in any way. Allows for a smooth wall surface to reduce pressure drops for water flow.

Multilayer Pipe and CopperMaincor multilayer pipe systems are gradually winning the argument to replace copper as the plumber’s choice of pipe.

The high level of copper use in the UK market shows that for everyday use, many installers are not convinced that pushfit plastic plumbing gives the performance they need.

Maincor addresses two particular issues. Firstly, its multilayer pipe is very competitive against copper and in such a volatile metals market, much more price stable. Secondly, it addresses the main performance requirements : it is formstable, has low expansion rates and a 100% oxygen barrier. It also has none of the disadvantages of copper : it cannot corrode and is highly resistant to furring and scaling. Maincor multilayer pipe is easily connected to existing copper installations.

In an industry dominated by copper and plastic, multilayer pipe is effectively the third way of plumbing.

Multilayer Plumbing DevelopmentsManifoldsThe Maincor plumbing offering has concentrated on the development of highly controllable manifold systems for plumbing and heating connection.

FittingsMaincor also has simple compression connectors to connect to 15mm, 22mm, and 28mm copper systems and press fittings for permanent undemountable systems.

Multi-FitLook out for the Maincor Multi-Fit connectors on page 14.

MLCP ApplicationsMaincor MLC pipe is suitable for domestic and commercial plumbing, underfloor heating and cooling and radiator heating. In fact, it can be used in a huge variety of plumbing, heating and process engineering applications where the maximum long term operating parameters do not exceed 10 bar or 95°C.

Advantages of MLCP • Formstable – can be easily formed by hand and does not

spring back.

• 100% Oxygen Barrier - means no consequent corrosion to primary equipment.

• Low Rates of Expansion - mean reduced clipping time. Fix and design as per copper.

• Hygienically Clean - no swarf or debris in pipe and the aluminium core allows the inner plastic layer to have no pigment, making it toxicologically clean.

• Conforms to NHBC Traceability Requirements - aluminium barrier means identification strips are not needed.

• No Scrap Value - means no risk of metal theft.

• Paint Finish - the high standard of finish in white means no second line painting is required.

• Speed - coming from a coil, MLCP can easily be threaded through a building and there is virtually no scrap. Being formstable and capable of tight bends, fewer elbows are required. This all leads to much faster installation times than traditional copper and lower installed costs.

• Colour - for major projects, MLCP can be manufactured in virtually any colour.

Pipe Composition Maincor MLC pipe is made up of multiple layers (PE-RT / AL / PE-RT) as follows:

8


e Systems &

Fittings


Maincor MLCP, PE-RT/AL/PE-RT, overlap welded aluminium multilayer 100% barrier composite pipe, supplied in coils.

Maincor MLCP, PE-RT/AL/PE-RT Coils

PiPe systeMs (continued)

Part No. Description Pack Qty Price Per m 8120014100 Maincor MLCP 12x1.6mm 100m £1.518160014050 Maincor MLCP 16x2mm 50m £1.858160014075 Maincor MLCP 16x2mm 75m £1.858160014100 Maincor MLCP 16x2mm 100m £1.858160014120 Maincor MLCP 16x2mm 120m £1.858160014200 Maincor MLCP 16x2mm 200m £1.858160014500 Maincor MLCP 16x2mm 500m £1.858200014100 Maincor MLCP 20x2.25mm 100m £2.898250014050 Maincor MLCP 25x2.5mm 50m £4.578320014050 Maincor MLCP 32x3mm 50m £6.56

Maincor MLCP, PE-RT/AL/PE-RT, overlap welded aluminium multilayer 100% barrier composite pipe, supplied in 5m straight lengths.

Maincor MLCP, PE-RT/AL/PE-RT Straight Lengths

Maincor 16mm and 20mm MLC pipe supplied in red or blue conduit.

Maincor Pipe in Conduit Coils

Part No. Description Pack Qty Price Per m 6111620150 Maincor MLCP 16x2mm Pipe in Conduit (Red) 50m £3.436111620250 Maincor MLCP 16x2mm Pipe in Conduit (Blue) 50m £3.436112023150 Maincor MLCP 20x2.25mm Pipe in Conduit (Red) 50m £5.156112023250 Maincor MLCP 20x2.25mm Pipe in Conduit (Blue) 50m £5.15

Part No. Description Pack Qty Price Per m 8160014005 Maincor MLCP 16x2mm 125m £2.178200014005 Maincor MLCP 20x2.25mm 80m £3.598250014005 Maincor MLCP 25x2.5mm 50m £5.328320014005 Maincor MLCP 32x3mm 35m £6.688400014005 Maincor MLCP 40x4mm 20m £10.968500014005 Maincor MLCP 50x4.5mm 20m £16.368630014005 Maincor MLCP 63x6mm 15m £26.44

Maincor pre-insulated MLC pipe supplied in 9mm or 13mm insulation.

Maincor Pre-Insulated Pipe Coils

Part No. Description Pack Qty Price Per m 10016209 Maincor Pre-insulated MLCP 16x2mm (9mm insulation) 50m £3.3310020229 Maincor Pre-insulated MLCP 20x2.25mm (9mm insulation) 50m £4.4310025259 Maincor Pre-insulated MLCP 25x2.5mm (9mm insulation) 50m £5.81100162013 Maincor Pre-insulated MLCP 16x2mm (13mm insulation) 50m £3.52100202213 Maincor Pre-insulated MLCP 20x2.25mm (13mm insulation) 50m £4.89100252513 Maincor Pre-insulated MLCP 25x2.5mm (13mm insulation) 50m £6.30

9


e Systems &

Fittings


PiPe systeMs (continued)

NB. In addition, Maincor makes a wide range of conduits in sizes from 8mm up to 200mm, in any colour, catering for special resistances to temperature, oils and chemicals. Details available on request.

Maincor pipe conduit for 12mm, 16mm, 20mm, 25mm and 32mm pipe.

Maincor Conduit

Part No. Description Pack Qty Price Per m 516350 16mm Pipe Conduit (Black) 50m £0.80520150 20mm Pipe Conduit (Red) 50m £0.87520250 20mm Pipe Conduit (Blue) 50m £0.87520350 20mm Pipe Conduit (Black) 50m £0.87523150 23mm Pipe Conduit (Red) 50m £1.11523250 23mm Pipe Conduit (Blue) 50m £1.11523350 23mm Pipe Conduit (Black) 50m £1.11529150 29mm Pipe Conduit (Red) 50m £1.62529250 29mm Pipe Conduit (Blue) 50m £1.62529350 29mm Pipe Conduit (Black) 50m £1.62536325 36mm Pipe Conduit (Black) 25m £1.89

Press fittings

A

C

B

AC

B

Maincor Equal Press Tee Fittings are used to branch off main distribution pipework, allowing effective distribution to multiple services.

Equal Press Tee

Part No. Description A x B x C Pack Qty Price Each PT16X3 Press Tee 16x16x16mm 10 £6.55PT20X3 Press Tee 20x20x20mm 10 £9.44PT25X3 Press Tee 25x25x25mm 10 £14.43PT32X3 Press Tee 32x32x32mm 5 £27.58PT40X3 Press Tee 40x40x40mm 1 £48.00PT50X3 Press Tee 50x50x50mm 1 £55.00PT63X3 Press Tee 63x63x63mm 1 £90.00

Maincor Reducing Press Tees are used to branch off main distribution pipework, allowing effective distribution to multiple services where reduction in size is required.

Reducing Press Tee

Part No. Description A x B x C Pack Qty Price Each PTR626 Press Tee 16x20x16mm 10 £10.71PTR226 Press Tee 20x20x16mm 10 £10.27PTR262 Press Tee 20x16x20mm 10 £10.27PTR266 Press Tee 20x16x16mm 10 £10.08PTR522 Press Tee 25x20x20mm 10 £11.81PTR525 Press Tee 25x20x25mm 10 £12.97PTR565 Press Tee 25x16x25mm 10 £12.48PTR566 Press Tee 25x16x16mm 10 £11.01PTR323 Press Tee 32x20x32mm 5 £17.56PTR353 Press Tee 32x25x32mm 5 £19.52PTR355 Press Tee 32x25x25mm 5 £18.23PTR363 Press Tee 32x16x32mm 5 £17.12PTR424 Press Tee 40x20x40mm 1 £45.00PTR454 Press Tee 40x25x40mm 1 £47.50PTR433 Press Tee 40x32x32mm 1 £39.00PTR434 Press Tee 40x32x40mm 1 £37.55PTR555 Press Tee 50x25x50mm 1 £46.50PTR545 Press Tee 50x40x50mm 1 £49.00PTR646 Press Tee 63x40x63mm 1 £100.00

10


e Systems &

Fittings


Press Tee with Female Thread

A BSP female thread connection is situated on the branch.

Part No. Description A x B x C Pack Qty Price Each PTF616 Press Tee with Female Thread 16x½“x16mm 10 £10.50PTF212 Press Tee with Female Thread 20x½“x20mm 10 £11.13PTF515 Press Tee with Female Thread 25x½“x25mm 10 £14.18PTF525 Press Tee with Female Thread 25x¾“x25mm 10 £14.18PTF323 Press Tee with Female Thread 32x¾“x32mm 5 £23.10PTF333 Press Tee with Female Thread 32x1“x32mm 5 £23.10PTF424 Press Tee with Female Thread 40x¾“x40mm 1 £42.00PTF535 Press Tee with Female Thread 50x1“x50mm 1 £52.50

A

C

B

Press fittings (continued)

Maincor Straight Press Couplers / Reducers are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.

Press Coupler/Press Reducer

Part No. Description Pack Qty Price Each CouplersPM1616 Press Coupler 16x16mm 10 £4.38PM2020 Press Coupler 20x20mm 10 £5.87PM2525 Press Coupler 25x25mm 10 £8.77PM3232 Press Coupler 32x32mm 5 £13.20PM4040 Press Coupler 40x40mm 1 £17.87PM5050 Press Coupler 50x50mm 1 £39.25PM6363 Press Coupler 63x63mm 1 £57.50

ReducersPMR206 Press Reducer 20x16mm 10 £5.39PMR252 Press Reducer 25x20mm 10 £7.60PMR256 Press Reducer 25x16mm 10 £7.06PMR323 Press Reducer 32x25mm 5 £13.20PMR403 Press Reducer 40x32mm 1 £25.60PMR503 Press Reducer 50x32mm 1 £33.00PMR504 Press Reducer 50x40mm 1 £35.65PMR634 Press Reducer 63x40mm 1 £56.50PMR635 Press Reducer 63x50mm 1 £54.25

Maincor Straight Press to Male Connectors are used to connect multilayer pipework to a wide variety of system components. The Male thread is a BSP connection and is also used in conjunction with plumbers fittings to achieve final connections.

Straight Press to Male Connector

Part No. Description Pack Qty Price Each PM16M1 Straight Press to Male Thread 16x½“ 10 £3.74PM16M2 Straight Press to Male Thread 16x¾“ 10 £5.27PM20M1 Straight Press to Male Thread 20x½“ 10 £5.51PM20M2 Straight Press to Male Thread 20x¾“ 10 £5.61PM25M2 Straight Press to Male Thread 25x¾“ 10 £7.08PM25M3 Straight Press to Male Thread 25x1“ 10 £9.22PM32M3 Straight Press to Male Thread 32x1“ 5 £10.48PM32M4 Straight Press to Male Thread 32x1¼“ 5 £16.47PM40M4 Straight Press to Male Thread 40x1¼“ 1 £22.00PM50M5 Straight Press to Male Thread 50x1½“ 1 £32.00PM63M6 Straight Press to Male Thread 63x2“ 1 £52.00

11


e Systems &

Fittings



Maincor Straight Press to Female Connectors are used to connect multilayer pipework to a wide variety of system components. The Female thread is a BSP connection and is also used in conjunction with plumbers fittings to achieve final connections.

Straight Press to Female Connector

Part No. Description Pack Qty Price Each PM16F1 Straight Press to Female Thread 16x½“ 10 £4.88PM16F2 Straight Press to Female Thread 16x¾“ 10 £5.25PM20F1 Straight Press to Female Thread 20x½“ 10 £6.51PM20F2 Straight Press to Female Thread 20x¾“ 10 £6.14PM25F2 Straight Press to Female Thread 25x¾“ 10 £7.29PM25F3 Straight Press to Female Thread 25x1“ 10 £14.70PM32F3 Straight Press to Female Thread 32x1“ 5 £16.28PM32F4 Straight Press to Female Thread 32x1¼“ 5 £18.53PM40F4 Straight Press to Female Thread 40x1¼“ 1 £22.00PM40F5 Straight Press to Female Thread 40x1½“ 1 £27.00PM50F5 Straight Press to Female Thread 50x1½“ 1 £31.00PM63F6 Straight Press to Female Thread 63x2“ 1 £42.50

Maincor Press Elbow to Male Thread connectors are to be used when a 90o elbow is required when joining to a BSP connection.

Press Elbow to Male Thread Connector

Part No. Description Pack Qty Price Each PG16M1 Press Elbow to Male Thread Connector 16x½“ 10 £6.30PG20M1 Press Elbow to Male Thread Connector 20x½“ 10 £7.88PG20M2 Press Elbow to Male Thread Connector 20x¾“ 10 £8.30PG25M2 Press Elbow to Male Thread Connector 25x¾“ 10 £11.81PG25M3 Press Elbow to Male Thread Connector 25x1“ 10 £12.13PG32M3 Press Elbow to Male Thread Connector 32x1“ 5 £15.59

Maincor 90o Press Elbows are used to achieve a tight bend where a radius bend would be unachievable or undesirable.

90o Press Elbow

Part No. Description Pack Qty Price Each PG1616 Press Elbow 16mm 10 £4.65PG2020 Press Elbow 20mm 10 £6.29PG2525 Press Elbow 25mm 10 £10.17PG3232 Press Elbow 32mm 5 £14.85PG4040 Press Elbow 40mm 1 £26.50PG5050 Press Elbow 50mm 1 £27.50PG6363 Press Elbow 63mm 1 £65.00

Maincor Straight Press to Female Thread Connectors with a swivel nut are used to connect multilayer pipework to a wide variety of system components.

Straight Press to Female Thread Connector (Swivel)

Part No. Description Pack Qty Price Each SPM16F1 Straight Press with Female Thread Connector (Swivel) 16x½“ FT 10 £7.56SPM16F2 Straight Press with Female Thread Connector (Swivel) 16x¾“ FT 10 £8.60SPM20F1 Straight Press with Female Thread Connector (Swivel) 20x½“ FT 10 £9.25SPM20F2 Straight Press with Female Thread Connector (Swivel) 20x¾“ FT 10 £10.25SPM25F3 Straight Press with Female Thread Connector (Swivel) 25x1“ FT 10 £11.63SPM32F4 Straight Press with Female Thread Connector (Swivel) 32x1¼“ FT 5 £19.83

12


e Systems &

Fittings



Maincor Press Elbow to Female Thread connectors are to be used when a 90o elbow is required when joining to a BSP connection.

Press Elbow to Female Thread Connector

Part No. Description Pack Qty Price Each PG16F1 Press Elbow to FemaleThread Connector 16 x ½“ 10 £5.61PG20F1 Press Elbow to FemaleThread Connector 20 x ½“ 10 £7.35PG20F2 Press Elbow to FemaleThread Connector 20 x ¾“ 10 £9.00PG25F2 Press Elbow to FemaleThread Connector 25 x ¾“ 10 £11.92PG25F3 Press Elbow to FemaleThread Connector 25 x 1“ 10 £12.23PG32F3 Press Elbow to FemaleThread Connector 32 x 1“ 5 £20.18

Maincor Press Wall Plate Elbows allow an outside tap or other similar connection to be piped in multilayer pipework and adapted to a ½” or ¾“Female thread.

Press Wall Plate Elbow

Part No. Description Pack Qty Price Each PS16F1 Press Wall Plate Elbow 16x½“ FT 10 £9.50PS20F1 Press Wall Plate Elbow 20x½“ FT 10 £10.66PS20F2 Press Wall Plate Elbow 20x¾“ FT 10 £12.86

Maincor Pre-assembled Mounting Plate and fittings for fast appliance connection.

Mounting Plate with Press Elbows

Maincor Press Stop Ends are used for quickly and permanently blanking Maincor MLC pipe.

Press Stop End

Part No. Description Pack Qty Price Each SE16 Press Stop End 16mm 10 £2.84SE20 Press Stop End 20mm 10 £3.26

Part No. Description Pack Qty Price Each AP153 Mounting Plate with Press Elbow 16 x ½“ (AP 153mm) 1 £20.50UP153 Mounting Plate with Press Elbow 16 x ½“ (UP 153mm) 1 £20.50AP80 Mounting Plate with Press Elbow 16 x ½“ (AP 80mm) 1 £20.50UP80 Mounting Plate with Press Elbow 16 x ½“ (UP 80mm) 1 £20.50

13


e Systems &

Fittings


Maincor Chrome Press Elbows, by a simple press connection, give an enhanced and professional appearance to pipework on show, for example as a connection to radiators.

Chrome Press Elbow

Part No. Description Pack Qty Price Each CRAD01 Chrome Press Elbow 12x75mm 1 £11.03CRAD02 Chrome Press Elbow 16x300mm 1 £15.44


Brass for plumbing and chrome for radiators

Suitable for 10mm, 15mm, 22mm and 28mm, Maincor Compression Connectors are the simple, easy way to connect multilayer pipe to copper compression fittings and a wide range of valves, radiator connections and threads with a straight BSP connector. They form a handy repair coupling.

Compression Connectors

Part No. Description Pack Qty Price Each COMP01B 12x10mm Compression Connector (Brass) 10 £5.26COMP02C 12x15mm Compression Connector (Chrome) 10 £5.78COMP03B 16x15mm Compression Connector (Brass) 10 £2.59COMP03C 16x15mm Compression Connector (Chrome) 10 £2.76COMP04B 20x22mm Compression Connector (Brass) 10 £4.58COMP05B 25x28mm Compression Connector (Brass) 5 £9.87

Press to Copper Tails are used to connect MLCP fittings to standard copper fittings to enable simple system connection.

Press to Copper Tail

Part No. Description Pack Qty Price Each MLCPCL01 16x15mm Press to Copper Tail 10 £6.07MLCPCL02 20x22mm Press to Copper Tail 10 £7.99MLCPCL03 25x22mm Press to Copper Tail 10 £9.38MLCPCL04 25x28mm Press to Copper Tail 5 £15.99MLCPCL05 32x28mm Press to Copper Tail 5 £17.64

additional fittings and accessories

White pipe clip with self-closing clamp for a fast and easy installation.

White Pipe Clip

Part No. Description Pack Qty Price Each WPC16 White Pipe Clip 16mm 100 £0.65WPC20 White Pipe Clip 20mm 100 £0.85WPC25 White Pipe Clip 25mm 50 £1.05WPC32 White Pipe Clip 32mm 50 £1.70WPC40 White Pipe Clip 40mm 25 £2.25WPC50 White Pipe Clip 50mm 25 £2.75WPC63 White Pipe Clip 63mm 25 £3.00

14


e Systems &

Fittings


Maincor Multi-fit

Suitable for MLC, PEX & PB Pipe

A simple, fast, demountable and low-cost fitting system!

1. Cut the MLC pipe 2. Bevel the end 3. Insert the fitting into the pipe

4. Use the allen key to screw the thread into the pipe. Once the pipe is fully visible in the viewing window the connection is

made. The fitting is fully demountable.

The fittings are supplied with both an o-ring for conical seats and a

flat washer for flat seats

+ =All you need!Installation is possible with just a bevelling tool and an allen key

Maincor Multi-Fit Straight Connectors are a simple and effective way of connecting multilayer and plastic pipes to potable plumbing systems, heating, underfloor heating, kitchen and bathroom appliances.

Maincor Multi-Fit Straight Connectors

Part No. Description Pack Qty Price Each MFT1612 Multi-Fit Straight Connector 16mm x ½“ 10 £2.45MFT1634 Multi-Fit Straight Connector 16mm x ¾“ (Eurocone) 10 £4.71MFT2012 Multi-Fit Straight Connector 20mm x ½“ 10 £4.73MFT2034 Multi-Fit Straight Connector 20mm x ¾“ (Eurocone) 10 £5.20MFT2534 Multi-Fit Straight Connector 25mm x ¾“ (Eurocone) 10 £6.30MFT2510 Multi-Fit Straight Connector 25mm x 1“ 10 £9.35MFT3210 Multi-Fit Straight Connector 32mm x 1“ 5 £12.55

15

Maincor Price List 2014 | Plum

bing

& H

eating M

anifold System

s


Manifold Plumbing Systems

The plumbing manifold distributes hot and cold water to appliances around the property. Pipes run from the manifold to each piece of sanitary wear (such as sinks, baths, washing machines). Continuous loops of pipe are used to and from the manifold so that there are no fittings in the system other than at the appliance and manifold, thus eliminating the possibility of joint leaks.

Using a manifold system has the added benefit of allowing for individual isolation of appliances in the event of a problem. The appliance can be isolated whilst the rest of the system is still working.

Why use Maincor Manifold Plumbing Systems? The Manifold Plumbing System offers the following benefits:

• Allowsindividualisolationofappliances• Reduceschanceofleakage-nojointsinthesystem• Fastandeasyinstallation• Safe,secureandeasytousecontroloverplumbing• Allowsadjustmentofflowforindividualappliances

36 mm

PluMbing & heating Manifold systeMs

RADIATOR

THERMOSTATIC VALVE

LOCKSHIELD VALVE

4-WAYMANIFOLD

BOILER

PIPE-IN-PIPE

SOLID / SCREED FLOOR

AIRINGCUPBOARD

LOFT

4-WAYMANIFOLD

Image courtesy of Emmeti UK

Typically, radiators are controlled by TRVs, which are often less efficient and ultimately less reliable than electronic room thermostats and programmable thermostats. Using manifold radiator connection, the radiator is ‘called’ on or off by the thermostat which electronically opens or closes the manifold actuators.

The manifold system is equally effective used with radiators or with a combination of radiators and underfloor heating.

When using a radiator manifold system with multiple thermostats, there is the option of using either radio or wired thermostats, in conjunction with thermal actuators and a wiring centre to offer accurate temperature control over the heating system.

Radiator Manifold Systems

Why use Radiator Manifold Systems? The Radiator Manifold System offers the following benefits:• Improvedcomfortlevels–bettertemperaturecontrol• Moreefficientuseofenergy–reducescost• Nojointswithinthebuildingfabric–reducedchanceof

leakage• Easyradiatorisolation

Fitting-Free Pipe ConnectionFitting-free pipe connection is a major benefit of the Radiator Manifold System. Without joints in the pipework, the chance of leaks is greatly reduced. Less joints also means quicker installation – more efficient on time and costs.

Radiator ManifoldsThe range of Maincor Radiator manifolds offers unrivalled safety and control and is available in 2 – 12 port configurations.

16


bing

& H

eating M

anifold System

s


PluMbing & heating Manifold systeMs (continued)

Maincor 2 - 4 Port ¾” and 1” Plumbing Manifolds provide a simple effective modular system, enabling the use of MLCP with no additional jointing to appliances and hot and cold water services. Manifold pipe connectors not included - see page 17.

Plumbing Manifold

Part No. Description Pack Qty Price Each DM3402 2 Port Plumbing Manifold ¾“ (Single) 1 £18.65DM3403 3 Port Plumbing Manifold ¾“ (Single) 1 £26.50DM3404 4 Port Plumbing Manifold ¾“ (Single) 1 £37.42DM0102 2 Port Plumbing Manifold 1“ (Single) 1 £19.63DM0103 3 Port Plumbing Manifold 1“ (Single) 1 £28.50DM0104 4 Port Plumbing Manifold 1“ (Single) 1 £38.77

Maincor Blanking Plugs are used for blanking the end of the Plumbing Manifold.

Blanking Plug

Part No. Description Pack Qty Price Each DMBP34F ¾“ Blanking Plug - Female 1 £2.43DMBP01F 1“ Blanking Plug - Female 1 £4.10DMBP34M ¾“ Blanking Plug - Male 1 £3.22DMP01M 1“ Blanking Plug - Male 1 £4.25

Maincor Bridging Pieces are used to join plumbing manifolds together, allowing the creation of manifolds serving up to 12 outlets from a single manifold.

Bridging Piece

Part No. Description Pack Qty Price Each DMBP34 ¾“ Bridging Piece 1 £5.03DMBP01 1“ Bridging Piece 1 £5.57

Maincor Aluminium Slider Rails are used to mount the Plumbing Manifolds and are supplied with screw and wall plug pack.

Aluminium Slider Rail

Part No. Description Pack Qty Price Each DMSR01 Aluminium Slider Rail 1 £13.52

For use with Plumbing Manifold and Aluminium Slider Rail.

Bracket Support Kit

Part No. Description Pack Qty Price /Pack DMBS34 ¾“ Bracket Support Kit 10 £11.90DMBS01 1“ Bracket Support Kit 10 £14.06

17


bing

& H

eating M

anifold System

s


PluMbing & heating Manifold systeMs (continued)

The Maincor range of 2 - 12 Port Radiator Manifolds offers complete safety and control. Electronically controlled by either wired or radio thermostats, the manifold removes the need for TRVs, offering accurate individual room control when used in conjunction with programmable or non-programmable thermostats. Fitting free MLC pipework from the manifold to the radiator removes the need for joints under a floor or over a ceiling, vastly reducing the risk of leaks. Requires pipe connectors and ball valves, both are sold separately - see below.

Radiator Manifold

Part No. Description Pack Qty Price Each RM02-04 2 Port Radiator Manifold 1 £102.74RM03-04 3 Port Radiator Manifold 1 £138.22RM04-04 4 Port Radiator Manifold 1 £169.39RM05-04 5 Port Radiator Manifold 1 £201.32RM06-04 6 Port Radiator Manifold 1 £232.03RM07-04 7 Port Radiator Manifold 1 £265.09RM08-04 8 Port Radiator Manifold 1 £297.48RM09-04 9 Port Radiator Manifold 1 £327.87RM10-04 10 Port Radiator Manifold 1 £357.39RM11-04 11 Port Radiator Manifold 1 £387.05RM12-04 12 Port Radiator Manifold 1 £417.37

Maincor Manifold Pipe Connectors join 12mm, 16mm & 20mm pipework to the manifold. For use with the Plumbing, Radiator or Underfloor Heating Manifolds. (Other sizes available upon request.)

Manifold Pipe Connector

Part No. Description Pack Qty Price Each MPA12 12 x 1.6mm Manifold Pipe Connector 1 £5.67MPA16 16 x 2mm Manifold Pipe Connector 1 £3.20MPA20 20 x 2.25mm Manifold Pipe Connector 1 £3.88

Maincor Blanking Plugs are used to blank-off outlets on the Plumbing, Radiator or Underfloor Heating Manifolds.

Blanking Plug

Part No. Description Pack Qty Price Each MABP2419 Manifold Blanking Plug 1 £3.24

Maincor Straight Ball Valves are used to provide isolation of the flow and return pipework connected onto the Plumbing, Radiator or Underfloor Heating Manifolds. This allows manifolds to be isolated both for filling the system, or draining down, without the risk of air ingression.

Straight Ball Valve

Part No. Description Pack Qty Price Each 50903001 ¾“ x ¾“ Straight Ball Valve (Single) 1 £9.2050903002 1“ x 1“ Straight Ball Valve (Single) 1 £14.50

Maincor Radiator Termination Box for use in screeded floors.

Radiator Termination Box

Part No. Description Pack Qty Price Each RTB16 Radiator Termination Box for 16mm Pipe 1 £19.50

18

Maincor Price List 2014 | U

nderfloor H

eating System

s


underfloor heating introduction

Why use Underfloor Heating?There are a huge number of benefits to using an underfloor heating system; here are just a few of them:

Comfort A correctly designed and installed system runs efficiently and supports the body’s natural requirements for warm feet and cool head. The heat is uniformly rising from the floor, rather than having warm air pockets around radiators.

Aesthetics Underfloor heating creates complete freedom of interior design with no radiators to worry about; every square inch of wall space can be used for room layouts.

Silence Underfloor heating is virtually silent when running.

Radiator Heating Heat MovementUnderfloor Heating Heat Movement

The diagrams above illustrate how the heat travels around the room in an underfloor heating system (left) and in a radiator system (right). The underfloor heating system heats the living area in the room, whilst the heat from the radiator system collects at the ceiling – a much less efficient heating method!

How Does Underfloor Heating Work?

Underfloor heating works by warm water pumped through pipes laid in the floor of the room. Much lower water temperatures are required as the large surface area of the floor is enough to warm the room efficiently as the heat rises. An underfloor heating system will generally run at around 45oC as opposed to 80oC used in radiator systems, which means that there are energy and running cost savings, especially when used with renewable heat sources such as heat pumps.

The underfloor heating market in the UK has grown considerably in the last 15 years from around £10m to over £160m per year. Underfloor heating is now the heating method of choice for many self builders and is being used increasingly in a wide range of commercial buildings such as schools, hospitals and offices, as well as in modern housing developments.

Underfloor heating is now designed to European and British Standards and thousands of plumbing and heating engineers have already trained to install underfloor heating, putting a tried and trusted heating system in safe hands.

Maincor offers underfloor heating systems in 16mm and 20mm pipe diameters with a range of manifolds, controls, and accessories to help create the ideal system.

Low Maintenance No need for manual operations, such as bleeding or painting of radiators.

Cost Effective Lower water running temperature means lower energy use, means lower heating bills.

Individual Room Control Rooms can be heated on an individual basis – for example, the bedroom can be at a different temperature from the living room.

Healthy Living Slower moving air particulates make underfloor heating the system of choice for asthmatics. Floors dry quicker after cleaning, reducing slip hazard. Underfloor heating also eliminates the risk of contact burns and collision damage from radiators.

Environment Lower fuel usage means lower CO2 emissions, which helps the environment.

19


nderfloor H

eating System

s


underfloor heating introduction (continued)

Hot Water SourcesUnderfloor heating can work with a large range of hot water sources – more commonly with condensing boilers, but also with renewable energy technologies such as solar and geothermal heat sources. For building extensions it can be connected into existing central heating systems with one of the Maincor Single Area Packs (See page 29).

Floor ConstructionsMaincor underfloor heating is suitable for use with a wide range of floor constructions including:

Solid Floors Floating Floors

For information relating to specialist low profile renovation systems or for a free of charge quotation, please contact either your local Sales Manager or the Technical Department

Maincor Aluminium Heat Emission Plates are supported by the joists (400mm centres). The plates are grooved so that the underfloor heating pipework can be fitted into them. The plates diffuse the heat for an even heat distribution across the floor.

The underfloor heating pipes are laid onto insulation board placed over a solid concrete base. Screed is then poured over the top of the pipes. This construction is typically used on ground floors or block and beam floors.

Maincor supplies a range of polystyrene panels in various density grades. The panels range from 30mm to 70mm depending on the solution required. The panels are pre-routed so that heat emission plates can be laid directly into the panels. Once this is complete the pipework can be installed into the plates. A floating floor is then laid over the top of the system.

Suspended Floors Mainfoil System

Uses a bubble aluminium foil which laps up and over the joists to create a sealed air void. The aluminium foil reflects the radiant heat up to the underside of the floor, which in turn heats the room.

Suspended Floors - Heat Emission Plates

Low Profile Dry Screed Board Low Profile Floating Floor

The underfloor heating pipes (12mm MLC pipe) is laid within 18mm pre-routed high density boards offering a low profile solution. The boards are interlocking, which means it is possible to tile directly over the floor.

The Low Profile Floating Floor system utilises 12mm MLC pipe laid into 15mm thick pre-routed polystyrene panels. The boards are covered in an aluminium foil which acts as the heat emitter, effectively spreading the heat evenly across the entire floor.

20


nderfloor H

eating System

s


Water Temperature ControlA range of factors will determine the water temperature required for an underfloor heating system; these will include:

• Thefloorconstruction• Theheatrequirementofthespace• Thefloorcoverings• Thepipediameterandpipecentresthatareused.

Generally, underfloor heating systems will run at temperatures ranging from 35oC - 50oC. If the boiler or heat source cannot supply the water at the required temperature, either thermostatic or actuated blending controls can be supplied. Typically, a secondary circulating pump would also be required where there are blending controls on the system.

Underfloor heating requires a low flow temperature, at design conditions there will be approximately a 7oC temperature drop through the underfloor heating circuits. Maincor supplies 3-port thermostatic blending valves to blend the primary flow from the boiler to mix with the underfloor heating return water to maintain the required temperature for the underfloor heating system. A pre-assembled thermostatic mixing valve and pumping unit which fits directly onto the Maincor underfloor heating manifold can also be supplied.

An alternative method of blending the water is to use an actuated blending valve and weather compensation controller. This is generally a slightly more expensive way of controlling an underfloor heating system, however, it does offer a more efficient way of controlling the water temperature. As the outside temperature decreases, the heating requirement of the building will increase, hence the amount of energy that has to be put back into the building will also increase to ensure comfort conditions are to be maintained.

underfloor heating introduction (continued)

Air Temperature ControlA thermostat is positioned in the room which is being heated and is set to the required temperature. Once the room gets up to the pre-set temperature, the thermostat will send a signal to the wiring centre, which will close the actuator fitted on the manifold. This stops the flow of water around the underfloor heating circuit until there is a further heat demand from the thermostat. To offer ultimate comfort, Maincor advises the use of a separate circuit and thermostat for each room or occupied area, since the heat demands and losses will differ throughout the property depending on usage and external conditions.

21


nderfloor H

eating System

s


underfloor heating systeMs

Maincor 1 - 12 port UFH Manifolds are supplied complete with flowmeters for ease of commissioning. Also included within the manifold arrangement are fill and drain ports, automatic air vents and fixing brackets. Requires pipe connectors and ball valves, both are sold separately.

UFH Manifold with Flowmeters

Part No. Description Pack Qty Price Each UFHM01 Maincor 1 Port Manifold with Flow Meters 1 £75.77UFHM02 Maincor 2 Port Manifold with Flow Meters 1 £103.40UFHM03 Maincor 3 Port Manifold with Flow Meters 1 £143.28UFHM04 Maincor 4 Port Manifold with Flow Meters 1 £177.73UFHM05 Maincor 5 Port Manifold with Flow Meters 1 £212.83UFHM06 Maincor 6 Port Manifold with Flow Meters 1 £246.78UFHM07 Maincor 7 Port Manifold with Flow Meters 1 £282.90UFHM08 Maincor 8 Port Manifold with Flow Meters 1 £318.55UFHM09 Maincor 9 Port Manifold with Flow Meters 1 £352.94UFHM10 Maincor 10 Port Manifold with Flow Meters 1 £387.56UFHM11 Maincor 11 Port Manifold with Flow Meters 1 £421.90UFHM12 Maincor 12 Port Manifold with Flow Meters 1 £459.64

Maincor UFH Control Packs are pre-assembled units which bolt directly onto the manifold and are used to blend and circulate the water around the underfloor heating system. The Control Pack includes an ‘A’ rated energy efficient pump and is suitable for serving areas of up to 150m2 or a maximum heat load of 14kW.

UFH Control Pack

Part No. Description Pack Qty Price Each CP150A Maincor UFH Control Pack 1 £450.00

Maincor Thermostatic Mixing Manual Valve for blending water to meet design temperature.

Thermostatic Manual Mixing Valve

Part No. Description Pack Qty Price Each MMV3-22 22mm Manual 3 Port Mixing Valve 1 £118.97MMV3-28 28mm Manual 3 Port Mixing Valve 1 £178.45

Maincor Straight Ball Valves are used to provide isolation for the flow and return pipework connecting onto the Plumbing, Radiator or Underfloor Heating Manifolds. This allows the manifold to be isolated both for filling the system, or draining down, without the risk of air ingression.

Straight Ball Valve

Part No. Description Pack Qty Price Each 50903001 ¾“ x ¾“ Straight Ball Valve (Single) 1 £9.2050903002 1“ x 1“ Straight Ball Valve (Single) 1 £14.50

Maincor Manifold Pipe Connectors join 12mm, 16mm & 20mm pipework to the manifold. For use with the Plumbing, Radiator or Underfloor Heating Manifolds.

Manifold Pipe Connector

Part No. Description Pack Qty Price Each MPA12 12 x 1.6mm Manifold Pipe Connector 1 £5.67MPA16 16 x 2mm Manifold Pipe Connector 1 £3.20MPA20 20 x 2.25mm Manifold Pipe Connector 1 £3.88

22


nderfloor H

eating System

s


underfloor heating systeMs (continued)

Maincor 3 Port Valve and Actuators are used in conjunction with a weather compensator controller. This will allow modulating, as opposed to a fixed water temperature.

3 Port Valve and Actuator

Part No. Description Pack Qty Price Each MV3-20R ¾“ 3 Port Valve + Actuator 120R-4VA 1 £324.45MV3-20S ¾“ 3 Port Valve + Actuator 120S-6VA 1 £324.45MV3-25R 1“ 3 Port Valve + Actuator 125R-8VA 1 £324.45MV3-25S 1“ 3 Port Valve + Actuator 125S-12VA 1 £324.45MV3-32S 1 ¼“ 3 Port Valve + Actuator 132S-18VA 1 £324.45

Used in conjunction with a 3 port valve, the Maincor Weather Compensator unit reads indoor (with indoor sensor), outdoor, flow, return and mixed flow temperatures. This allows it to modulate the flow temperature to system requirements depending on the outdoor weather conditions. The indoor sensor is an optional extra that is used to feed back information to the weather compensator, allowing the controller to see the buildings reaction to the change in flow temperatures.

Weather Compensator

Part No. Description Pack Qty Price Each WC360E Single Circuit Weather Compensator 1 £757.05WC076E Indoor Sensor 1 £86.52

Maincor 2 Port Zone Valve and Actuator offers independent zone control. This normally closed valve can also activate the heat source via the volt free contacts.

2 Port Zone Valve and Actuator

Part No. Description Pack Qty Price Each ZV22 22mm 2 Port Valve & Actuator 1 £100.00ZV28 28mm 2 Port Valve & Actuator 1 £125.00

Maincor offers 230V and 24V Electro-Thermic Heads which open and close to control the flow of water around the underfloor circuits.

Electro-Thermic Head

Part No. Description Pack Qty Price Each ETH024-04 Electro-Thermic Head 24V 1 £28.50ETH230-04 Electro-Thermic Head 230V 1 £28.50

The 3m sensors can be extended up to 20m in length by using appropriate cable and these can be used as either floor sensors or as wall sensors if the additional sensor housing is used. Please contact the Technical Department for advice on this subject if required.

Sensors

Part No. Description Pack Qty Price Each SP-02 3m Remote Sensor Probe 1 £11.50SH-02 Sensor Housing 1 £23.50

23

Maincor Price List 2014 | H

eating C

ontrols


heating controls

The 230V Wiring Centre has terminals to wire up to 8 thermostats (zones). The unit controls the operation of the Electro-Thermic Heads, the boiler, the UFH pump and the Zone Valve.

230V Wiring Centre

Part No. Description Pack Qty Price Each WC3-02 230V 8 Zone Wiring Centre 1 £119.00

The 230V Programmable Thermostats require a 3 core plus earth cable. The 230V Night Setback (NSB) Thermostats require a 4 core plus earth cable. If NSB is not required, then a 3 core plus cable should be used. Typically the thermostats are wired back to the 230V Wiring Centre.

230V Thermostats

The Single Channel Time Clock is used to switch the UFH system on/off, or to operate night setback (note, for use with SBSTAT-02 - see above).

Time Clock

Part No. Description Pack Qty Price Each TC-02 Single Channel Time Clock 1 £80.00

The Radio Programmable Thermostats are ideal for use when wiring has not been connected to the thermostats. A range of functions are included within the thermostats.

Radio Programmable Thermostats

The 8 Zone Radio Receiver receives the signals from up to 8 thermostats (zones). The unit controls the operation of the Electro-Thermic Heads, the boiler, the UFH pump and the Zone Valve.

8 Zone Radio Receiver

Part No. Description Pack Qty Price Each RFWC-02 8 Zone Radio Receiver (230V heads) 1 £240.00

Part No. Description Pack Qty Price Each SBSTAT-02 230V Night Setback Dial Thermostat 1 £35.00PRS-02 230V Slimline Programmable Thermostat 1 £85.98PRS-RP-02 230V Slimline Programmable Thermostat c/w sensor terminals 1 £109.18TSPRS-02 230V Touch Screen Programmable Thermostat 1 £116.80TSPRT-RP-02 230V Touch Screen Programmable Thermostat c/w sensor terminals 1 £133.90

Part No. Description Pack Qty Price Each RFPRS-02 Radio Slimline Programmable Thermostat 1 £102.74RFTSPRS-02 Radio Touchscreen Programmable Thermostat 1 £126.00

24

Maincor Price List 2014 | H

eating C

ontrols


adVanced air teMPerature controls

The Neo Control System uses a 3 core plus earth cable to send a demand signal from the thermostat to the 230V Wiring Centre. Data communication is managed via a wireless network. The Neohub should be plugged into a wireless router and this allows for the system to be controlled via Smart Phones or Tablets.

Neo Control System

Part No. Description Pack Qty Price Each NEOSTAT 230V Programmable App Enabled Thermostat (White) 1 £127.50NEOSTAT (B) 230V Programmable App Enabled Thermostat (Black) 1 £127.50NEOHUB Neohub Remote Control unit 1 £250.00WC3-02 230V 8 Zone Wiring Centre 1 £119.00

Neo Control SystemsThe increasingly common use of smart phones and tablets has led to the development of ‘app’ controlled heating

systems. The versatile advanced air temperature controls supplied by Maincor, allow for the control of multi thermostats

from anywhere in the world.

The Neo Thermostat has been designed to replace a standard mains powered thermostat and provides the ability to

create a network system, with local and remote access, controlled via phone and tablet applications (‘apps’). The heating

signal to the wiring centre is hard wired, but the communication data is sent via a wireless network. The Neohub connects

directly to a spare port on your router, obtaining an IP address and joining itself to your home network. The system is

simple to install and set up and is compatible with broadband connections with Dynamic IP Addresses.

Neo Control System Features

The Neo Thermostat has a Modern Slimline Appearance After installation, the flush-mounted thermostats will be only 15mm deep.

Energy Saving Optimum Start This calculates the amount of heat-up time required to ensure your home is warm when required.

Wireless Networking The heating signal is hard wired, but communication data is sent via the mesh network to the Neohub

32 Thermostats Controlled Via One Network The Neohub will automatically route the data around your home ensuring range is never an issue.

Perfect for New Build & Retrofit As the Neo Thermostat is mains powered, it is perfect for new homes and for retrofitting existing properties, since existing 3 core plus earth cable can be utilised.

Local Control (in case of loss of Broadband connection) Should the internet connection fail, the heating system can still be operated within the home by using the thermostat keypad.

Smart Phone App Applications are available for iPhone/iPad, Android Tablets & Phones and Kindle Devices.

Thermostat Options The Neo Thermostat is available in Sapphire Black and Glacier White . The thermostat has a remote sensor connection, so a remote sensor probe can be connected.

NEW!

25


nderfloor H

eating A

ccessories


underfloor heating accessories

Used in conjunction with Mainfoil, the Mainfoil Clips are designed to straddle a standard 50mm joist at 400mm centres.

Mainfoil Clips

Part No. Description Pack Qty Price Each MF0002 Mainfoil Clips 100 £0.90

Designed for use with intermediate timber floor constructions, Mainfoil has high insulating and reflective properties. The foil increases the thermal efficiency of the system and allows installation to be carried out between joists. (One 30m2 roll = 20m2 UFH coverage).

Mainfoil Insulation

Part No. Description Pack Qty Per m2

MF0001 Mainfoil Insulation 30 m2 £5.50

Maincor Heat Emission Plates are for use in timber suspended floors where the joists are at 400mm centres, or in floating floor applications. The plates are 390mm wide x 1m in length. Allow 2.2 plates per m2 of floor area. Scored plates available at 150mm centres. Varying pipe sizes and centres available on request.

Heat Emission Plate

Part No. Description Pack Qty Price Each HEP001 Heat Emission Plate 1 £8.95

Maincor Floating Floor Panels are for use with the heat emission plates. The boards are made from pre-routed expanded polystyrene. When used in ground floors, additional insulation may be required to comply with Part L of the Building Regulations. Panels are available in different thicknesses and centres.

Floating Floor Panel

Part No. Description Pack Qty Price Each FF3070 Floating Floor Panel (30mm x 1.2m x 1.2m) 1 £20.55FF5070 Floating Floor Panel (50mm x 1.2m x 1.2m) 1 £24.87FF7070 Floating Floor Panel (70mm x 1.2m x 1.2m) 1 £32.45

Maincor Pipe Staples are used to fix pipework to EPS or equivalent insulation, which must be a minimum depth of 25mm. They can be installed by hand or by staple gun. (See page 32 in tools section).

Pipe Staples

Part No. Description Pack Qty Price Each PS40-04 40mm Pipe Staples 250 £0.09PS60-04 60mm Pipe Staples 250 £0.14

26


nderfloor H

eating A

ccessories


underfloor heating accessories (continued)

Maincor Clamp Track is designed to secure 16mm pipe. It has a self adhesive backing for ease of installation. Allow 1m for every m² of floor area.

Clamp Track

Maincor Screed Foil is designed to be placed directly on top of the floor grade insulation, providing a greater level of reflective insulation. Supplied in 60m x 1.25m rolls. Thermal resistance = 0.081m2K/W.

Screed Foil


50903019 Screed Foil Insulation 4mm 75m2 £4.75

Maincor Edge Insulation is utilised around the perimeter of a room with a screeded floor to absorb expansion from the screed and prevent thermal bridging. The edge insulation also comes complete with a polyethylene section which is used to give a tight seal between edge insulation and floor insulation.

Edge Insulation

Part No. Description Pack Qty Per m

50903022 Maincor Edge Insulation 25m £1.20

Maincor Split Conduit is used when insulating feed pipes or crossing expansion joints in underfloor heating systems.

Split Conduit

Maincor Pipe Positioning Panels are used for securing 16mm pipe within screeded floors. The castellated panels allow for the pipe to be secured at 50mm centres. Insulation is not included. The boards are to be overlapped. Each board covers an active area of (0.8m x 1.4m) 1.12m²

Pipe Positioning Panel

Maincor Insulation Roll is an expanded polystyrene insulation with a woven film grid. The insulation is ideal for intermediate floors where there is a heated room below. The insulation fulfils the requirements of BS1264 in this application.

Maincor Insulation Roll

Part No. Description Pack Qty Per m

50903036 Clamp Track 16mm 100m £2.85

Part No. Description Pack Qty Each

SC400 Split Conduit for 16mm Pipe (400mm) 10 £0.24

Part No. Description Pack Qty Per Panel

PPP16 Pipe Positioning Panel for 16mm Pipe (1.45m x 0.85m) 1 £14.00


MIR30 Maincor Insulation Roll (30mmx1mx10m) 10m2 £9.00

27

Maincor Price List 2014 | Low

Profile Overlay System

s


loW Profile oVerlay systeMs

Maincor offers a low profile Dry Screed Board System. The boards are engineered gypsum flooring panels with a 60% recycled content, which gives a strong, lightweight and quickly-installed dry screed system. The boards are pre-routed and pipes are laid directly into the grooved channels. The boards have a high thermal conductivity (0.38W/mK) so heating response times are quicker and energy use is reduced without the need for additional elements to act as the heat emitter.

The boards are lap-jointed and are to be screwed and glued together, ensuring a solid floor finish. The channels accept 12mm pipe at 150mm centres giving a low profile system.

Dry Screed Board – Low Profile 18mm

Part No. Description Price

Per Metre8120014100 12 x 1.6mm (100m Coil) £1.51

EachMPA12 12 x 1.6mm Manifold Pipe Adaptor £5.50MAINBOARD Grooved MainBoard (18mm x 1.2m x 0.6m) £52.50MAINADHESIVE Joint Adhesive (0.8kg bottle covers 20m²) £27.50MAINSCREWS 17mm Joint Screws (500/box covers 60m²) £15.75

Maincor offers a range of overlay systems which are ideal for refurbishing existing buildings.

Glued Joints Fixed in place 12mm MLCP

Maincor Low Profile Floating Floor Panels are manufactured from polystyrene foam, CNC machined into the upper surface of the panel. Aluminium foil, 45microns thick, is factory bonded to the upper surface of the panel (and into the main grooves) and acts as a radiant surface improving heat transfer and reducing system start up times.

The grooves in the insulation securely retain the continuous UFH pipework in the correct position, eliminating the need for supplementary fixings. The boards are 15mm thick and are pre-routed to accept 12mm pipe laid at 150mm centres.

Floating Floor – Low Profile 15mm

Boards in place 12mm MLCP

Part No. Description Price

Per Metre8120014100 12 x 1.6mm (100m Coil) £1.51

EachMPA12 12 x 1.6mm Manifold Pipe Adaptor £5.50EP15 15mm Polystryrene Overlay Panel (15mm x 1.2m x 0.6m) £23.25RFT50 Reinforced Foil Tape (50mm x 45m) £25.00

NEW!

NEW!

28

Maincor Price List 2014 | M

ainDeck System

s


Maindeck systeMs

Maincor MainDeck High Density Flooring is an 18mm 100%

recycled floor system that is three times more efficient than

chipboard, making it ideal for use with Underfloor Heating

Systems.

The MainDeck boards are used to increase efficiency due to their

low thermal resistance and rapid heat transfer characteristics,

making them ideal for underfloor heating and acoustic

applications. They feature a tongue and groove edge detail

and benefit from high impact resistance. The MainDeck boards

enable boilers, heat pumps and heat recovery systems to work

at maximum efficiency and they deliver comfortable, controllable

heat to the occupant quicker than traditional floor finishes.

Applications, Features and BenefitsThe boards are designed to take the place of a chipboard floor when laid onto existing sub floors. For use with low profile and traditional floating floor systems

Light weight in comparison to traditional screeds Approximately third of the weight of a screed floor

No wet trades involved, hence reduced drying times Dramatically speeds up the build programme

The high thermal conductivity (0.40W/mK) spreads heat evenly across the floor Heat distribution similar to a screed floor but more responsive

Fast installation, quick and easy to install Tongue and groove profile to be glued – no screws required

Three times more efficient than chipboard Thermal resistance of MainDeck = 0.045W/m2K, thermal resistance of chipboard = 0.130W/m2K

Prices are supplied on a project by project basis. To obtain a price, please contact the office with your requirements.

Maincor MainDeck High Density Flooring NEW!

29


nderfloor H

eating Sing

le Area Packs


underfloor heating single area Packs

• Programmable Wired or Radio Controlled Room Thermostat• Edge Insulation• Pipe Staples • Zone Valve• Bevelling Tool• Pipe Cutter

Single Area Pack For Screeded Floors

Part No. Floor Area Maximum Price Output (KW) Per PackSAP1SW 0 - 18m2 1.8KW £890.74SAP2SW 18 - 28m2 2.8KW £1,056.10SAP3SW 28 - 36m2 3.6KW £1,155.32SAP4SW 36 - 44m2 4.4KW £1,235.79

Wired Controlled Single Area Pack

Part No. Floor Area Maximum Price Output (KW) Per PackSAP1SR 0 - 18m2 1.8 KW £1,005.39SAP2SR 18 - 28m² 2.8 KW £1,170.75SAP3SR 28 - 36m² 3.6 KW £1,267.76SAP4SR 36 - 44m² 4.4 KW £1,350.44

Radio Controlled Single Area Pack

* Floor grade insulation to comply with Part L of the Building Regulations is not included.

The Maincor Single Area Pack for screeded floors is ideal for extensions and conservatories. The correct pack for the installation should be selected based on the floor area (m²) of the project. The pack includes all the necessary components to install the underfloor heating pipes onto floor grade insulation*. Packs are available that include either a wired programmable thermostat or a radio frequency programmable thermostat.

Pack contents

• 16 x 2mm Multilayer Pipe• Maincor Underfloor Heating Manifold• 16 x 2mm Manifold Pipe Connectors• Ball Valves • Maincor Control Pack

The Maincor Single Area Pack for timber suspended floors is ideal for extensions and conservatories and is designed for use with 50mm joists laid at 400mm centres. The correct pack for the installation should be selected based on the floor area (m²) of the project. The pack includes all the necessary components to install the underfloor heating pipes above floor grade insulation* which is to be fitted between the floor joists. Packs are available that include either a wired programmable thermostat or a radio frequency programmable thermostat.

Pack contents

• 16 x 2mm Multilayer Pipe• Maincor Underfloor Heating Manifold• 16 x 2mm Manifold Pipe Connectors• Ball Valves • Maincor Control Pack

• Programmable Wired or Radio Controlled Room Thermostat• Mainfoil Clips• Mainfoil Insulation • Zone Valve• Bevelling Tool• Pipe Cutter

Single Area Pack For Timber Floors

Part No. Floor Area Maximum Price Output (KW) Per PackSAP1TW 0 - 18m2 1.26KW £1,075.94SAP2TW 18 - 28m2 1.96KW £1,425.40SAP3TW 28 - 36m2 2.52KW £1,516.90SAP4TW 36 - 44m2 3.08KW £1,576.43

Wired Controlled Single Area Pack

Part No. Floor Area Maximum Price Output (KW) Per PackSAP1TR 0 - 18m2 1.26 KW £1,189.49SAP2TR 18 - 28m² 1.96 KW £1,540.05SAP3TR 28 - 36m² 2.52 KW £1,632.65SAP4TR 36 - 44m² 3.08 KW £1,692.18

Radio Controlled Single Area Pack

* Floor grade insulation to comply with Part L of the Building Regulations is not included.

30

Maincor Price List 2014 | Tools


* Net priced item

tools

A range of tools for bevelling Maincor MLC pipe prior to inserting fittings. (Product shown 60953212*)

Bevelling Tool

* Net priced item

Maincor Pipe Cutting Tool for use with Maincor MLC pipework in sizes 12-32mm.

Pipe Cutting Tool

Part No. Description Pack Qty Price Each AX1* Pipe Cutting Tool (12-32mm) 1 £9.88

* Net priced item

For the professional where speed matters, a faster Cutting Tool for use with Maincor MLC pipework, with a range of cutters up to 63mm. (Product shown 60950010*)

Pipe Cutting Tool

Part No. Description Pack Qty Price Each 60950010* Pipe Cutting Tool (12-20mm) as shown 1 £40.9660950011* Pipe Cutting Tool (16-32mm) rachet type 1 £40.9660950013* Pipe Cutting Tool (12-63mm) disc type 1 £54.60

* Net priced item

Maincor Internal Bending Springs can be used to form an accurately curved bend for the parts of the installation which will be visible.

Internal Bending Spring

Part No. Description Pack Qty Price Each IB0012* 12mm Internal Bending Spring 1 £3.28IB0016* 16mm Internal Bending Spring 1 £2.40IB0020* 20mm Internal Bending Spring 1 £2.74IB0025* 25mm Internal Bending Spring 1 £3.71IB0032* 32mm Internal Bending Spring 1 £4.37

* Net priced item

Maincor External Bending Springs can be used to form an accurately curved bend for the parts of the installation which will be visible.

External Bending Spring

Part No. Description Pack Qty Price Each EB0016* 16mm External Bending Spring 1 £2.95EB0020* 20mm External Bending Spring 1 £3.28EB0025* 25mm External Bending Spring 1 £3.55

60953212*

60950010*

Part No. Description Pack Qty Price Each 60953212* 3 Size Bevelling Tool 16/20/25mm 1 £11.4760953211* Bevelling Tool 12mm 1 £25.0060953217* Bevelling Tool 16mm 1 £10.4060953218* Bevelling Tool 20mm 1 £13.0060953219* Bevelling Tool 25mm 1 £15.6060953213* Bevelling Tool 32mm 1 £21.8460953214* Bevelling Tool 40mm 1 £24.0260953215* Bevelling Tool 50mm 1 £26.2160953216* Bevelling Tool 63mm 1 £28.35

31



tools (continued)

Jaws, charger and additional battery for Maincor Mini Pressing Tool.

Maincor Battery operated Mini Pressing Tool suitable for pressing fittings from 12 - 32mm. The tool is supplied with a rechargeable battery and a charger. Press jaws are supplied separately (see below).

Mini Pressing Tool & Accessories

Part No. Description Pack Qty Price Each 60953006* Mini Pressing Tool (12-32mm) 1 £627.90

Part No. Description Pack Qty Price Each 60953170* 12mm Mini Press Jaw 1 £62.2460953171* 16mm Mini Press Jaw 1 £62.3560953172* 20mm Mini Press Jaw 1 £62.3560953173* 25mm Mini Press Jaw 1 £64.3860953174* 32mm Mini Press Jaw 1 £64.3860953007* Replacement Battery for Mini Pressing Tool 1 £59.1960952202* Spare Charger 1 £70.98

* Net priced item

Jaws, charger and additional battery for Maincor Pressing Tool.

Maincor Battery operated Pressing Tool suitable for pressing fittings from 16 - 63mm. The tool is supplied with a rechargeable battery and a charger. Press jaws are supplied separately (see below).

Pressing Tool & Accessories

Part No. Description Pack Qty Price Each 60952200* Pressing Tool 16-63mm 1 £903.80

Part No. Description Pack Qty Price Each 60953001* 16mm Press Jaw 1 £55.5560953002* 20mm Press Jaw 1 £55.5560953003* 25mm Press Jaw 1 £55.5560953004* 32mm Press Jaw 1 £55.5560953005* 40mm Press Jaw 1 £105.0560953008* 50mm Press Jaw 1 £110.5160953009* 63mm Press Jaw 1 £527.4460952201* Replacement Battery for Pressing Tool 1 £79.1860952202* Spare Charger 1 £70.98

* Net priced item

Maincor Manual Pressing Tool suitable for pressing 16 & 20mm press fittings. Press jaws are supplied separately (see below).

Manual Pressing Tool & Accessories

* Net priced item

Jaws for Maincor Manual Pressing Tool.

* Net priced item

* Net priced item

* Net priced item

Part No. Description Pack Qty Price Each MP20* Manual Pressing Tool 1 £180.00

Part No. Description Pack Qty Price Each MPR16* 16mm Press Jaw for Manual Pressing Tool 1 £25.00MPR20* 20mm Press Jaw for Manual Pressing Tool 1 £25.00

32



tools (continued)

* Net priced item

Maincor Multi-Fit Tools are for use with 16-32mm Multi-Fit fittings. Alternatively, allen keys can be used to make connections (10mm, 14mm & 19mm).

Multi-Fit Tool

* Net priced item

Maincor Pipe Staple Guns are used for ease of installation and provide fast effective pipe fixing.

Pipe Staple Gun

Part No. Description Pack Qty Price Each PSGUN-04* Pipe Staple Gun 1 £119.60

* Net priced item

Maincor Pipe De-Coilers are for use with Maincor MLC pipe coils. They can be used with pipe of up to 25mm diameter and a maximum coil length of 500m.

Pipe De-Coiler

Part No. Description Pack Qty Price Each 60950051* Pipe De-Coiler 1 £245.70

* Net priced item

Maincor Manifold Spanner 27mm.

Manifold Spanner

Part No. Description Pack Qty Price Each SPAN-04* Manifold Spanner 27mm 1 £7.10

* Net priced item

Maincor re-usable Pressure Test Plugs should be used to test Maincor multilayer 16mm, 20mm and 25mm pipework.

Pressure Test Plug

Part No. Description Pack Qty Price Each TP0016* 16mm Pressure Test Plug 1 £1.97TP0020* 20mm Pressure Test Plug 1 £2.18TP0025* 25mm Pressure Test Plug 1 £2.45

Part No. Description Pack Qty Price Each MFT-TOOL* Multi-Fit Tool 1 £9.95

33

Maincor Price List 2014 | Pre-Insulated

Pipe System

s


LOGSTOR Pre-Insulated Pipe Systems

Pre-insulated PiPe systeMs

Why Choose Maincor?• Atechnicaldepartmentonhandtoproducequotations

and advise on design and installation

• Fastquotationturnaround

• Nationalsalesteamavailableforsitevisitsandsupport

• Fastdelivery–stockiskeptatacentrallylocatedwarehouse in the Midlands

LOGSTOR is the world’s leading manufacturer of pre-insulated pipes for energy efficient transportation of liquids.

LOGSTOR pre-insulated flexible pipe is designed for the efficient transfer of hot and cold water. Pipework is available which is suitable for biomass boilers, community heating, heat pump installations or hot/cold water distribution. Single or dual pipes are supplied in coils giving the installer an economical, simple to install and highly efficient system.

Call us on 01455 555930 to discuss your project.

Why Choose LOGSTOR?• LOGSTORdistributestoover30countries

• Over3,000,000mofpiperangingfromDN15toDN110installed each year

• Over50years’experienceinmanufacture

• Morethan175millionmetresofLOGSTORpipesupplied to date

The success of LOGSTOR is largely due to its commitment to finding the optimum solution in energy conservation.

34

Maincor Price List 2014 | D

esign G

uides


design guidesMaincor is represented at and supports the Domestic Heating and Design Panel of CIBSE (Chartered Institution of Building Service Engineers), considered to be the UK’s leading authority in Building Services : Maincor is pleased to make these definitive guides available to Maincor customers.

* Net priced item

The Domestic Heating Design Guide has been produced to assist professional heating engineers to specify and design wet central heating systems.

Domestic Heating Design Guide

Part No. Description Pack Qty Price Each CIBSEDHD* CIBSE Domestic Heating Design Guide 1 £28.00

* Net priced item

The Underfloor Heating Design & Installation Guide is to be read in conjunction with the Domestic Heating Design Guide. The Guide covers the specific requirements of underfloor heating design and covers the installation of commonly found systems.

Underfloor Heating Design & Installation Guide

Part No. Description Pack Qty Price Each CIBSEUFH* CIBSE Underfloor Heating Design & Installation Guide 1 £20.00

* Net priced item

The Solar Heating Design & Installation Guide covers the various types of systems and focuses on the design and installation of solar domestic water heating.

Solar Heating Design & Installation Guide

Part No. Description Pack Qty Price Each CIBSESHD* CIBSE Solar Heating Design & Installation Guide 1 £29.50

* Net priced item

The Rainwater Harvesting Design & Installation Guide covers the various types of systems and focuses on the design and installation of rainwater harvesting systems.

Rainwater Harvesting Design & Installation Guide

Part No. Description Pack Qty Price Each CIBSERHD* CIBSE Rainwater Harvesting Design & Installation Guide 1 £16.00

35

Maincor Price List 2014 | Term

s & C

onditions


1 - Definitions

In these Terms and Conditions:-

Company means Maincor Ltd, Elizabethan Way, Lutterworth, LE17 4NJ or any other Maincor company.

Buyer means any customer, company or person ordering Goods and/or Services of the Company and whose order for the Goods and/or Services is accepted by the Company.

Conditions means the Terms and Conditions set out herein.

Contract means the Contract for the sale of Goods and/or services to be provided by the Company pursuant to the Contract.

Goods means the Goods and/or Services the Company agrees to supply.

Notice/Writing includes facsimile transmission, email and other comparable means of communication sent to the other party at its registered office or principal place of business.

Order means a request in writing from the Buyer to the Company to supply any of the Company’s Goods and/or Services.

2 -Application

a) Any Goods and/or Services supplied by the Company shall be made exclusively on the basis of and subject to the Terms and Conditions set out below.

b) No addition to, or variation of these Terms and Conditions shall bind the Company unless agreed in writing and signed by a director of the Company. No agent or person employed by the Company has any authority to alter or vary in any way these Terms and Conditions except as stated above. If such variation is accepted by the Company in writing, these Terms and Conditions shall continue to apply as if that variation were incorporated into these Terms and Conditions.

c) Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Company shall be subject to correction without liability on the part of the Company.

3 - Acceptance of Orders

a) No order submitted by the Buyer is accepted by the Company unless confirmed in Writing by the Company or delivery of the Goods and/or Services is made by the Company.

b) The Buyer shall be responsible to the Company for ensuring the accuracy of any order submitted by the Buyer to the Company and for giving the Company any necessary information relating to the order within sufficient time to enable the Company to perform the Contract in accordance with its Terms and Conditions.

c) The quantity, quality and description of and any specification for the Goods and/or services are those set out in the Company’s quotation or the Buyers order (to the extent accepted by the Company).

d) If the Company accepts any request by the Buyer to supply any Goods and/or Services other than those specifically referred to in the Company’s current price list then the Buyer shall indemnify the Company against all losses, damages, costs etc incurred by the Company in connection with any claim for infringement of any patent, copyright, design, trademark or other intellectual property rights. The Company gives no warranty that any Goods and/or Services supplied on this basis will be fit for their intended purpose.

e) The Company may make any changes in the specification of the Goods and/or Services which are required to conform with any applicable statutory or EC requirements or which do not materially affect their quality or performance.

f) No Order which has been accepted by the Company may be cancelled by the Buyer without the written agreement of the Company and the Buyer undertakes to pay all costs, charges and expenses incurred by the Company for any or all work carried out by the Company prior to cancellation.

g) All drawings, designs, specifications, quotations and other information provided by the Company are confidential and all rights of copyright and other intellectual property rights in their respect shall remain the property of the Company and shall not pass to the Buyer.

h) All descriptions, specifications, drawings and particulars of layouts and dimensions submitted by the Company are deemed approximate only and descriptions and illustrations in the Company’s catalogues, price lists and other advertising matter shall not form any part of a contract.

i) All goods must be ordered by the Buyer in the packed quantities as shown in the current price lists of the Company.

4 - Delivery and Prices

a) The price of the Goods and/or Services shall be at the price specified in the Company’s confirmation of order or, if none, at the price in the Company’s current published price list at the date of supply of the Goods and/or Services. Any quoted prices other than those published in the Company’s current price list shall be non binding upon the Company unless a fixed quotation is agreed in writing and signed by a director of the Company.

b) All prices are subject to increase to reflect variations from time to time in costs which are due to any factor beyond the control of the Company (including but not limited to costs of materials, labour, transport, currency fluctuation and any tax, fees or charges imposed by the Government or other authority) or any change in delivery dates, quantities specifications given by the Buyer or any failure of the Buyer to give the Company adequate information or instructions.

c) All prices are given by the Company on an ex works basis and exclude VAT and any other duties applicable and the Buyer shall be liable to pay those duties and (subject to condition i) the Company’s charges for transport, packaging and insurance.

d) Dates of delivery and deadlines quoted by the Company are deemed approximate unless explicitly agreed in writing by the Company and the time for delivery shall not be of the essence unless specifically previously agreed by the Company in writing.

e) The Company is entitled to make delivery by instalments against any order it accepts from the Buyer and these Terms and Conditions shall apply to each instalment delivery and any claim by the Buyer in respect of any one or more of the instalments shall not entitle the Buyer to treat the Contract as a whole as repudiated.

f) If the Company failed to deliver the Goods (or any instalment) for any reason other than any cause beyond the Company’s reasonable control, or the Buyers fault and the Company is accordingly liable to the Buyer, the Company’s liability shall be limited to the excess over the Company’s price of the Goods (if any) of the cost to the Buyer (in the cheapest available market) of similar Goods to replace those not delivered.

g) If the Buyer fails to take delivery of the Goods or fails to give the Company adequate delivery instructions at the time stated for delivery then without limiting or any other right or remedy available to the Company, the Company may:

i) Store the goods until actual delivery and charge the Buyer for the reasonable costs (including insurance of storage)

ii) Sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.

h) The mode of transport or delivery shall be at the Company’s discretion. For deliveries outside UK, the Company shall be entitled to charge all additional delivery costs to the Buyers account.

i) The Buyer shall be liable to pay delivery charges where:

i) The Company’s net invoice value (excluding VAT and delivery) is under £300.00

ii) The Goods are specified by the Buyer as being required for next day receipt, whether delivery is to the Buyer or any third party address stipulated by the Buyer.

iii) The Goods are requested by the Buyer to be delivered to a site address, whether for next day receipt or not.

iv) Any alteration to clause i) must be agreed and confirmed by the Company in writing.

j) Goods must be carefully examined on delivery and acceptance thereof duly signed for by the Buyer or his appointed agent will be deemed to constitute acceptance by the Buyer of receipt of the Goods in good condition and conformity in all aspects with the order.

k) i) Unless otherwise agreed in writing by the Company all prices specified by the Company exclude the cost of packing. Any necessary packaging material shall be invoiced at cost price and shall not be taken back.

ii) The Buyer will dispose of all packaging materials in accordance with the regulations (statutory or otherwise) relating to the protection of the environment. iii) The Company shall use all reasonable endeavours to ensure, where necessary, the appropriate packaging is used for despatch, but shall not be liable for any damage or loss of Goods between despatch and delivery to the Buyer.

5 - Terms of Payment

a) Unless the Company specifies in writing (signed by a director of the Company or other person authorised by a director) the Buyer shall pay all invoices in full, without any set off, deduction or counter claim, no later than the last business day of the month following the date of the invoice and the time of payment shall be of the essence of the Contract.

b) If the Buyer fails to make any payment by the due date, the Company may suspend any further deliveries to the Buyer and at the Company’s discretion, interest will be charged at 4% over the base rate of HSBC bank from the date payment was due until and including the date of the actual payment.

c) If the Buyer issues a cheque which is not honoured on presentation, or if the Company deems it necessary to arrange special presentation of a cheque, the Company reserves the right to debit the Buyer with the cost of doing so.

d) If the Buyer does not meet the Conditions of payment, or in the case of reasonable doubts about the Buyers credit worthiness or the Buyer makes any voluntary arrangement with its creditors, becomes bankrupt, becomes subject of an administration order, or goes into liquidation, the Company may cancel any outstanding contract with the Buyer and all outstanding invoices on the Buyers account with the Company will become due.

6 - Risk and Property

a) The title to all Goods supplied by the Company shall remain with the Company (retained Goods) until such time that cash or cleared funds have been received by the Company in full for those Goods, and all other Goods for which payment is then due, together with any costs incurred by the Company in attaining such payment.

b) The Buyer shall hold the retained Goods as the Company’s fiduciary agent and store them in such a way that they can be easily identified as being owned by the Company and shall ensure that they are fully insured.

c) The Buyer has the right to resell the retained Goods in the ordinary course of its business. Rights to pledge, use as collateral or to lend the retained Goods are specifically excluded.

d) The Buyer shall be obliged to inform the Company about any deterioration or destruction of the retained Goods immediately and shall furnish all information necessary to protect the Company’s interest against third parties.

e) Until such time as title to the Goods passes to the Buyer the Company may at any time require the Buyer to deliver up the Goods to the Company and if the buyer fails to do so, enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.

7 - Defects and Liability

a) Subject to the exclusions set out in 7b below, the Company confirms that the Goods will correspond with their specification at the time of delivery and will be free from defect in material and workmanship from the date of delivery for twelve months.

b) The Company shall be under no liability in respect of any defect in the Goods arising from any drawing, design or specification supplied by the Buyer.

c) The Company shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Company’s instructions (whether oral or in writing), misuse, or alteration or repair of the Goods without the Company’s written approval.

d) The Company shall be under no liability (or any other Warranty, Condition or Guarantee) if the total price for the Goods has not been paid by the due date for payment.

e) This liability does not extend to parts, materials or other equipment not manufactured by the Company in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Company.

f) The Company does not warrant the accuracy or otherwise of any design, drawing, specification, instructions, or other information or advice that it provides as part of its Services and/or as ancillary information in relation to the Goods.

g) Any claim by the Buyer for any defect in the quality or condition of the Goods must be notified in writing to the Company within 7 days of delivery or if failure was not apparent on reasonable inspection, within a reasonable time after discovery of the defect, but in any event within 6 months of delivery.

h) Where the Goods are returned by the Buyer and accepted by the Company as being defective, the Company shall, at its option, either repair or replace such Goods without cost to the Buyer or allow the Buyer a credit on his account. The Company shall not be liable to the Buyer for any claim by the Buyer for any work done on or with the Goods, loss of profit, or for any loss, damage or cost to the Buyer whatsoever, other than the replacement cost of the Goods and the Buyer shall not be entitled to withhold payment by reason of an alleged defect.

i) Except as expressly provided in these Terms and Conditions all warranties, conditions, and other terms implied by statute or common law are excluded.

j) Except in respect of death or personal injury caused by the Company’s negligence, the Company shall not be liable to the Buyer by reason of any representation, or any implied warranty, condition or other term, or any duty at common law under the express terms of the Contract for any consequential loss or damage (whether loss of profit or otherwise), costs, expenses, anticipated profits, or other claims for consequential compensation whatsoever (and whether caused by negligence of the Company or its employees or agents or otherwise) which arise out of or in connection with the supply of the Goods and/or Services of the Company.

8 - Force Majeure

The Company shall not be liable to the Buyer to the extent that fulfilment of its obligation to the Buyer has been prevented, hindered or delayed by force majeure as herein defined and without limiting the generality of the foregoing the Company shall be entitled to cancel delivery in whole or in part when it is delayed in or prevented from making delivery by strikes, lock outs, trade disputes or labour troubles or any cause beyond the Company’s control including without limitation Act of God, regulation or request, fire, accident, war, riot, delay in transportation, inability to obtain adequate labour, materials or manufacturing facilities and the Company shall not be bound to obtain in the market Goods with which to replace the Goods, delivery of which has been cancelled as a result of any said events.

9 - General Conditions

a) The Company reserves the right to modify or improve any of its products from time to time without any prior notification and such modifications or improvements shall not entitle the Buyer to reject the Goods so improved or modified or any products previously supplied to the Buyer prior to the modification or improvement being affected.

b) The Company may perform any of its obligations or exercise any of its rights under these Terms and Conditions through any member of its Group.

c) Any person who is not a party to any contract under these Terms and Conditions has no right to enforce any part of these Terms and Conditions.

d) Any notice relating to these Terms and Conditions shall be in writing and served or delivered to the other party at its registered office or principal place of business or such other address as may have been notified in writing prior to the party giving notice.

e) If any provision in these Terms and Conditions is found by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of these Terms and Conditions and the remainder of the provision in question shall not be affected.

f) No waiver by the Company of any breach of these Terms and Conditions shall be considered as a waiver of any subsequent breach of the same or any other provision.

g) The Buyer must not assign any of its rights or obligations under these Terms and Conditions without the prior written consent of the Company.

h) The validity, construction and performance of these Terms and Conditions shall be governed by the law of England and be within the exclusive jurisdiction of the English courts.

i) These Terms and Conditions shall replace any of the Company’s previous Terms and Conditions.

terMs & conditions

Maincor supports and/or is a member of:

Maincor Ltd Elizabethan Way Lutterworth Leicestershire LE17 4NJ Phone: 01455 555930 Fax: 01455 555931 Email: [email protected] Web: www.maincor.co.uk

april 2014 pipe system brochure & price list - maincor · pre-insulated pipe heating...

Documents