included… · the opening. step 4: select yourt installation type the following are the 3...
Post on 15-Jul-2020
0 Views
Preview:
TRANSCRIPT
home protection you can install yourself
Measure Instructions & Order Forms Included
Improve Your HomeSecurityProtect your family and valuables by turning your easy entry windows into impassable barriers
Climate ControlUp to 15°C cooler in summer and 15°C warmer in winter for the perfect interior environment
Energy SavingsClimate control properties give you savings of up to 40% on your energy bills
Light ControlFrom full natural light to complete darkness. You decide the amount of light entering your home
Privacy100% block out of intruding eyes looking into your home
Noise ReductionLoud music and noisy neighbours will be a thing of the past with up to 70% reduction of outside noise
Storm & Hail ProtectionProtect your windows from hailstorms and extreme weather and eliminate the chance of glass breaking and outside exposure
Bushfire ProtectionEliminate the chance of excessive heat and embers breaking your windows and entering your home
• Fully assembled in one package The ready to install Ezy-Fit roller shutters will be sent to you complete with instructions in one easy to manage package.
• Easy to install It’s as easy as drilling 8 holes into your shutter guides and 8 holes into your wall, then securing the shutter to your wall and it’s done. The average install time is 90 minutes per shutter.
• Precise and easy to follow instructions We have designed a set of interactive instructions to guide you through each step of selecting, measuring and installing your Ezy-Fit roller shutters. You can follow the instructions at your own pace to confidently install your roller shutters.
• Free delivery Australia wide* Ezy-Fit roller shutters are delivered to your door for free.
• 24 hour customer assistance (1800 633 136) With the most reliable, prompt and professional service, our 24 hour call centre has been established for you to call us at any stage of the selection, measurement, and installation for help and advice.
Save money... Do it yourself
*Please see back page or visit Ezy-Fit website for notes on direct delivery.
What to Do
Select and measureFollow the DIY Select and Measure instructions section of this brochure to complete the DIY order form. Instructions are also available online at www.EzyFitRollerShutters.com.au
Place your orderTake the completed order form to the Special Orders Desk in store to place your order.
Receive and installYour new roller shutters will be delivered to your doorstep within 15 working days*, ready to install, with installation instructions included.
*Please see back page or visit Ezy-Fit website for notes on delivery time.
DIY Select and Measure Instructions
Not sure? ☎ 1800 633 136
Double-hung Fixed
Casement
Sliding
Awning Hopper
Step 2: Identify wall typeBrick / Precast Concrete
Rendered Blueboard
Weatherboard / Cladding
Rendered Foam
Order form sample:
Step 3: Identify window type
Order form sample:
Suitable for all types of openings.
Roller shutter guides are secured on the face of the wall and outside the opening.
Step 4: Select your installation typeThe following are the 3 different installation types.
Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.
Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Side view:
Not sure? ☎ 1800 633 136
Roller shutter installed on the face of wall
Window
Wall
Not sure? ☎ 1800 633 136
Double-hung Fixed
Casement
Sliding
Awning Hopper
Step 2: Identify wall typeBrick / Precast Concrete
Rendered Blueboard
Weatherboard / Cladding
Rendered Foam
Order form sample:
Step 3: Identify window type
Order form sample:
Suitable for all types of openings.
Roller shutter guides are secured on the face of the wall and outside the opening.
Step 4: Select your installation typeThe following are the 3 different installation types.
Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.
Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Side view:
Not sure? ☎ 1800 633 136
Roller shutter installed on the face of wall
Window
Wall
Order form sample:
Order form sample:
In-Reveal:Face-Fit:Suitable for all types of openings.
Roller shutter guides are secured on the face of the wall and outside the opening.
Step 4: Select your installation type
Limited:Same as face-fit but suitable for openings that are limited by a return wall on one side.
The following are the 3 different installation types.
Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.
Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.
Suitable for all types of openings with a recess of at least 30 mm. Roller shutter is secured inside the opening.
Cannot be used for casement, awning, and hopper windows.
Pelmet
Guide
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet BoxPe
lmet
Box
Rol
ler
Shut
ter
Hei
ght
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
tRoof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Side view: Side view:
Order form sample:
Window type Installation type
Double-hung All
Sliding All
Fixed All
Awning Face-Fit or Limited
Casement Face-Fit or Limited
Hopper Face-Fit or Limited
Not sure? ☎ 1800 633 136
Roller shutter installed on the face of wall
Roller shutter installed on the face of wall
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter - Shutter guide
Minimum recess of 30 mm required within the opening
Roller shutter installed within the opening
Roller shutter installed within the opening
Roller shutter limited by a wall on one side
Minimum recess of 30 mm required within the opening
Window Wall
Roller shutter guide
Window Wall Window Wall
Window
Wall
Order form sample:
Order form sample:
In-Reveal:Face-Fit:Suitable for all types of openings.
Roller shutter guides are secured on the face of the wall and outside the opening.
Step 4: Select your installation type
Limited:Same as face-fit but suitable for openings that are limited by a return wall on one side.
The following are the 3 different installation types.
Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.
Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.
Suitable for all types of openings with a recess of at least 30 mm. Roller shutter is secured inside the opening.
Cannot be used for casement, awning, and hopper windows.
Pelmet
Guide
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view:Top view:
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Side view: Side view:
Order form sample:
Window type Installation type
Double-hung All
Sliding All
Fixed All
Awning Face-Fit or Limited
Casement Face-Fit or Limited
Hopper Face-Fit or Limited
Not sure? ☎ 1800 633 136
Roller shutter installed on the face of wall
Roller shutter installed on the face of wall
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter - Shutter guide
Minimum recess of 30 mm required within the opening
Roller shutter installed within the opening
Roller shutter installed within the opening
Roller shutter limited by a wall on one side
Minimum recess of 30 mm required within the opening
Window Wall
Roller shutter guide
Window Wall Window Wall
Window
Wall
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
Step 6: Clearance above opening (Face-Fit and Limited only)
Step 7: Packing profile (Face-Fit and Limited only)
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
No obstruction or clearance more than 300mm from the top of the opening
If clearance is less than 300mm from top of the opening
If obstruction is level withthe top of the opening i.e. no clearance
Do not fill this part of the order form. (Keep this section blank)
Write 000 on the order form.Write the measurement on the order form.
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Order form sample:
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Handle, Mullion, or FrameProtruding past the face of wall Measured Distance If not needed, leave this section blank.
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Measure on the face of wall, from top to the sill
Measure outside on the face of wall, from left to right of the architrave
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Packing Profile
Roller ShutterGuide
Roller Shutter
Roller Shutter Roller ShutterGuide
If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
Step 9: Sill
Not sure? ☎ 1800 633 136
If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.
Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.
We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.
Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.
This type of wall shown does not require shutter stops.
* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.
This type of wall shown requires shutter stops.
Order form sample:Order form sample:
Step 9: Photo/Diagram assist (optional)
Order form sample:
Opening complete with sill
Opening without sill
Shutter stop not required
Not sure? ☎ 1800 633 136
If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.
Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.
We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.
Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.
This type of wall shown does not require shutter stops.
* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.
This type of wall shown requires shutter stops.
Order form sample:Order form sample:
Step 9: Photo/Diagram assist (optional)
Order form sample:
Opening complete with sill
Opening without sill
Shutter stop not required
The window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.
Step 8: Photo/Diagram assist (optional)
If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.
Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.
Not sure? ☎ 1800 633 136
If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.
Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.
We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.
Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.
This type of wall shown does not require shutter stops.
* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.
This type of wall shown requires shutter stops.
Order form sample:Order form sample:
Step 9: Photo/Diagram assist (optional)
Order form sample:
Opening complete with sill
Opening without sill
Shutter stop not required
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
Step 10: Control Methods
AC Electric Motors:• Average life span of 15-17 years
• Wall switch operation
• Connected to the AC mains of the house
• A qualified electrician is required to do the wiring
• Optional extras of remote control and battery backup available
DC Battery Motors:(additional cost - Item Number 210 0000)
• Operates using a rechargeable handset as its power supply
• Handsets need to be recharged like a cell phone on average once a week
• Average life span of the battery is 2 to 4 years
• Average life span of the motor is 7 to 9 years
• Connect these motors yourself without requiring an electrician
• Operates during a power outage
Not sure? ☎ 1800 633 136
If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.
Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.
We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.
Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.
This type of wall shown does not require shutter stops.
* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.
This type of wall shown requires shutter stops.
Order form sample:Order form sample:
Step 9: Photo/Diagram assist (optional)
Order form sample:
Opening complete with sill
Opening without sill
Shutter stop not required
Step 12: Select Colours
Blue Ridge
Use our online Colour Visualiser to match the colours with the look of your house.
Colours are subject to printing variations. To see the exact colours visit our displays at Bunnings Warehouse or use Colourbond colours catalogue.
Jasper
Ezy-Fit Roller Shutters are available in 9 colours:
Evening Haze
Monument
Shale Grey
Woodland GreyClassic Cream
Paperbark Natural White
Step 13: Additional Extras
Remote Control for AC Electric Motors:(additional cost - Item Number 104 1098)
With the remote control, you can operate your shutters from your sofa or bed. Remote control comes with the hand-held control unit in the photo. (this replaces the wall switch)
Battery Backup (UPS) for AC Electric Motors:(additional cost - Item Number 104 1127)The battery backup is beneficial in instances of electrical power loss where shutter use may still be needed and is recommended for bedrooms or doorways. One shutter will function for approximately 8 cycles. A fully qualified electrician is required to wire this.
If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.
Step 5: MeasurementHeight
Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Measure the width from left to right of the opening and write the exact measurement on the order form.
Important: Do not add or subtract off the opening measurements taken.
Width
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Top view
Order form sample:
Order form sample:
Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.
Examples:
Do not fill this part of the order form. (Keep this section blank)
Order form samples:
Step 7: Packing profile (Face-Fit and Limited only)
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.
Example:
O Roller shutter blocked by the door handle PPacking profile used to provide a gap
Window
Wall
Wall
Window
Roof
Eave
Wall
Window
Ope
ning
Hei
ght
Pelm
et B
ox
Rol
ler
Shut
ter
Hei
ght
Window
Wall
Roof
Ope
ning
Hei
ght
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Eave
Dis
tanc
e
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Roof
Wall
Window
Window
Wall
Eave
Dis
tanc
e
Ope
ning
Hei
ght
Roof Roof
Eave
Dis
tanc
eO
peni
ng H
eigh
t
Window
Wall
Eave
Pelmet Box
Pelm
et B
ox
Rolle
r Sh
utte
r H
eigh
t
Rol
ler
Shut
ter
Hei
ght
Roller shutter - Shutter guide
Roller shutter - Pelmet
Roller shutter - Pelmet
Roller shutter installedon the face of wall
Wall
Roller shutter installedwithin the opening
Wall
Width
Window
Hei
ght
Window
Hei
ght
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
At least 22 mmfrom the windowIdeal: 35 mm
At least 22 mmfrom the windowIdeal: 35 mm
In-r
evea
l ope
ning
hei
ght
mea
sure
d in
side
the
ope
ning
Wall
Window
Face-Fit Installation In-Reveal Installation
Roller shutterguide
Window
Measured distance
Packing profile
Roller shutter
Handle, mullion, or frameProtruding past the face of wall
Minimum recess of 30 mmrequired within the opening
Wall
Minimum recess of 30 mmrequired within the opening
Window
WallWindow
Window Wall
Roller shutter limitedby a wall on one side
Measure on the face of wall, from top to the sill
Roller shutter installedon the face of wall
Roller shutter installedwithin the opening
Roof
Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136
Side view
Measure outside on the face of wall, from top to bottom of the architrave
Window frame protruding the
face of wall
Roof
Measure on the face of wall, from top to the sill
Window
Window frame protruding
the face of wall
Measure outside on the face of wall, from left to right of the architrave
Width
Width
Wall
Hei
ght
Hei
ght
Customer Name: Phone: ( ) Mobile: Customer's Delivery Address: Suburb: Residential or Business Address: State: Postcode: Email Address (required for tracking):
Select and Measure instructions must be used to complete order form correctly. Make sure the fields with the asterisk (*) are completed.
- - - -Special Orders Team Member to complete and fax or email to supplier. No orders will commence manufacturing until order form is received- - - -
Order Summary DIY & Install gen6-v1
Description Item Number Item Price Qty Item Total
Total Price (including GST)
Team Member Name: Order Date: Estimated Delivery Date*:
CSO Number: Store: *Allow 15 working days for delivery
Fax Number: (03) 9798 8473 E-mail: info@ezyfitrollershutters.com.au (Please read all disclaimers on rear before ordering).
* 1. Roller shutter no. 1
* 1. Roller shutter no. 2 * 1. Roller shutter no. 3 Area Name: Area Name: Area Name: * 2. Wall type: * 2. Wall type: * 2. Wall type: Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:
Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:
Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:
* 3. Window type: * 3. Window type: * 3. Window type: Double-hung Sliding Fixed
Awning Casement Hopper
Double-hung Sliding Fixed
Awning Casement Hopper
Double-hung Sliding Fixed
Awning Casement Hopper
* 4. Installation: * 4. Installation: * 4. Installation: Face-Fit In-Reveal Limited Face-Fit In-Reveal Limited Face-Fit In-Reveal Limited * 5. Measurements: * 5. Measurements: * 5. Measurements: Height (mm) ↕ Height (mm) ↕ Height (mm) ↕
Width (mm) ↔ Width (mm) ↔ Width (mm) ↔
6. Clearance above opening: 6. Clearance above opening: 6. Clearance above opening: Distance (mm) Distance (mm) Distance (mm) 7. Packing profile: 7. Packing profile: 7. Packing profile: Distance (mm) Distance (mm) Distance (mm)
8. Photo/Diagram assist (optional)
8. Photo/Diagram assist (optional)
8. Photo/Diagram assist (optional) E-mail Fax Post E-mail Fax Post E-mail Fax Post
9. Sill:
9. Sill:
9. Sill: Shutter stop required Shutter stop required Shutter stop required * 10. Control method: * 10. Control method: * 10. Control method: AC Electric DC Battery (additional cost)
AC Electric DC Battery (additional cost)
AC Electric DC Battery (additional cost)
* 11. Control side: * 11. Control side: * 11. Control side: Left Right Left Right Left Right * 12. Colour: * 12. Colour: * 12. Colour: Slats: Pelmet/Guides:
Slats: Pelmet/Guides:
Slats: Pelmet/Guides:
13. Additional extras (AC Only) [Available at an additional cost]
13. Additional extras (AC Only) [Available at an additional cost]
13. Additional extras (AC Only) [Available at an additional cost]
Remote Control Battery Backup Remote Control Battery Backup Remote Control Battery Backup
ROLLER SHUTTER COLOURSBlue Ridge
WarrantyTerms & Conditions
Applications
Jasper Evening Haze Monument Shale Grey Woodland GreyClassic Cream Paperbark Natural White
15 Years - All roller shutter parts and components
5 Years - AC motor and AC wall switch
3 Years - DC motor
2 Years - AC remote control and battery backup (optional extras)
1 Year - DC motor handset and battery
* Please see website for details on maintaining warranty
1. Direct Delivery applies for Major Cities of Australia as per the ASGC-RA. Areas that are not Major Cities, or some properties/farms may not be able to receive direct delivery, which will result in a delivery to a local depot or the Bunnings Store.
2. 15 working days’ turnaround applies for Major Cities of Australia as per ASGC-RA. Areas that are not Major Cities may incur delays in delivery.
3. Free delivery only covers the first delivery attempt; no second delivery will be done or re/direct allowed without an incurred cost.
4. Deliveries cannot be scheduled to an exact time or day. Package tracking details are provided via email after the package has been booked so that customers are able to make themselves available for the delivery.
5. Authority to leave the products in a safe location on your premises has been granted to the carriers in the event that you are not able to sign for your delivery. In the event that the carrier cannot leave the products on your premises, they will need to be collected from a local depot.
6. All damaged claims must be made within 48 hours of the product being delivered/picked up.
Please contact us or visit our website for further clarification on any information.
Copyright © Ultimate Shutter Pty Ltd 2016 All Rights Reserved.
Windows, doorways, bars, room dividers, roof windows, canteens, pergolas, verandas, cabanas, bay windows, garden windows, curved windows, atriums, patios, closets, cupboards, garages, trucks, vans and partitioning areas.
The below terms are a summary only. Please visit the Ezy-Fit website for detailed terms and conditions.
top related