included… · the opening. step 4: select yourt installation type the following are the 3...

14
home protection you can install yourself Measure Instructions & Order Forms Included

Upload: others

Post on 15-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

home protection you can install yourself

Measure Instructions & Order Forms Included

Page 2: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

Improve Your HomeSecurityProtect your family and valuables by turning your easy entry windows into impassable barriers

Climate ControlUp to 15°C cooler in summer and 15°C warmer in winter for the perfect interior environment

Energy SavingsClimate control properties give you savings of up to 40% on your energy bills

Light ControlFrom full natural light to complete darkness. You decide the amount of light entering your home

Privacy100% block out of intruding eyes looking into your home

Noise ReductionLoud music and noisy neighbours will be a thing of the past with up to 70% reduction of outside noise

Storm & Hail ProtectionProtect your windows from hailstorms and extreme weather and eliminate the chance of glass breaking and outside exposure

Bushfire ProtectionEliminate the chance of excessive heat and embers breaking your windows and entering your home

Page 3: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

• Fully assembled in one package The ready to install Ezy-Fit roller shutters will be sent to you complete with instructions in one easy to manage package.

• Easy to install It’s as easy as drilling 8 holes into your shutter guides and 8 holes into your wall, then securing the shutter to your wall and it’s done. The average install time is 90 minutes per shutter.

• Precise and easy to follow instructions We have designed a set of interactive instructions to guide you through each step of selecting, measuring and installing your Ezy-Fit roller shutters. You can follow the instructions at your own pace to confidently install your roller shutters.

• Free delivery Australia wide* Ezy-Fit roller shutters are delivered to your door for free.

• 24 hour customer assistance (1800 633 136) With the most reliable, prompt and professional service, our 24 hour call centre has been established for you to call us at any stage of the selection, measurement, and installation for help and advice.

Save money... Do it yourself

*Please see back page or visit Ezy-Fit website for notes on direct delivery.

Page 4: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

What to Do

Select and measureFollow the DIY Select and Measure instructions section of this brochure to complete the DIY order form. Instructions are also available online at www.EzyFitRollerShutters.com.au

Place your orderTake the completed order form to the Special Orders Desk in store to place your order.

Receive and installYour new roller shutters will be delivered to your doorstep within 15 working days*, ready to install, with installation instructions included.

*Please see back page or visit Ezy-Fit website for notes on delivery time.

Page 5: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

DIY Select and Measure Instructions

Page 6: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

Not sure? ☎ 1800 633 136

Double-hung Fixed

Casement

Sliding

Awning Hopper

Step 2: Identify wall typeBrick / Precast Concrete

Rendered Blueboard

Weatherboard / Cladding

Rendered Foam

Order form sample:

Step 3: Identify window type

Order form sample:

Suitable for all types of openings.

Roller shutter guides are secured on the face of the wall and outside the opening.

Step 4: Select your installation typeThe following are the 3 different installation types.

Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.

Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Side view:

Not sure? ☎ 1800 633 136

Roller shutter installed on the face of wall

Window

Wall

Not sure? ☎ 1800 633 136

Double-hung Fixed

Casement

Sliding

Awning Hopper

Step 2: Identify wall typeBrick / Precast Concrete

Rendered Blueboard

Weatherboard / Cladding

Rendered Foam

Order form sample:

Step 3: Identify window type

Order form sample:

Suitable for all types of openings.

Roller shutter guides are secured on the face of the wall and outside the opening.

Step 4: Select your installation typeThe following are the 3 different installation types.

Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.

Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Side view:

Not sure? ☎ 1800 633 136

Roller shutter installed on the face of wall

Window

Wall

Order form sample:

Order form sample:

In-Reveal:Face-Fit:Suitable for all types of openings.

Roller shutter guides are secured on the face of the wall and outside the opening.

Step 4: Select your installation type

Limited:Same as face-fit but suitable for openings that are limited by a return wall on one side.

The following are the 3 different installation types.

Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.

Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.

Suitable for all types of openings with a recess of at least 30 mm. Roller shutter is secured inside the opening.

Cannot be used for casement, awning, and hopper windows.

Pelmet

Guide

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet BoxPe

lmet

Box

Rol

ler

Shut

ter

Hei

ght

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

tRoof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Side view: Side view:

Order form sample:

Window type Installation type

Double-hung All

Sliding All

Fixed All

Awning Face-Fit or Limited

Casement Face-Fit or Limited

Hopper Face-Fit or Limited

Not sure? ☎ 1800 633 136

Roller shutter installed on the face of wall

Roller shutter installed on the face of wall

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter - Shutter guide

Minimum recess of 30 mm required within the opening

Roller shutter installed within the opening

Roller shutter installed within the opening

Roller shutter limited by a wall on one side

Minimum recess of 30 mm required within the opening

Window Wall

Roller shutter guide

Window Wall Window Wall

Window

Wall

Page 7: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

Order form sample:

Order form sample:

In-Reveal:Face-Fit:Suitable for all types of openings.

Roller shutter guides are secured on the face of the wall and outside the opening.

Step 4: Select your installation type

Limited:Same as face-fit but suitable for openings that are limited by a return wall on one side.

The following are the 3 different installation types.

Face-Fit and In-Reveal options are the 2 most common, where the limited installation is only to be used if the opening is limited by an obstruction on the side.

Try and select In-Reveal installation for a more integrated look on your home, if your wall and widow type permit this installation.

Suitable for all types of openings with a recess of at least 30 mm. Roller shutter is secured inside the opening.

Cannot be used for casement, awning, and hopper windows.

Pelmet

Guide

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view:Top view:

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Side view: Side view:

Order form sample:

Window type Installation type

Double-hung All

Sliding All

Fixed All

Awning Face-Fit or Limited

Casement Face-Fit or Limited

Hopper Face-Fit or Limited

Not sure? ☎ 1800 633 136

Roller shutter installed on the face of wall

Roller shutter installed on the face of wall

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter - Shutter guide

Minimum recess of 30 mm required within the opening

Roller shutter installed within the opening

Roller shutter installed within the opening

Roller shutter limited by a wall on one side

Minimum recess of 30 mm required within the opening

Window Wall

Roller shutter guide

Window Wall Window Wall

Window

Wall

Page 8: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

Page 9: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

Step 6: Clearance above opening (Face-Fit and Limited only)

Step 7: Packing profile (Face-Fit and Limited only)

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

No obstruction or clearance more than 300mm from the top of the opening

If clearance is less than 300mm from top of the opening

If obstruction is level withthe top of the opening i.e. no clearance

Do not fill this part of the order form. (Keep this section blank)

Write 000 on the order form.Write the measurement on the order form.

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Order form sample:

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Handle, Mullion, or FrameProtruding past the face of wall Measured Distance If not needed, leave this section blank.

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Measure on the face of wall, from top to the sill

Measure outside on the face of wall, from left to right of the architrave

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Packing Profile

Roller ShutterGuide

Roller Shutter

Roller Shutter Roller ShutterGuide

If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Page 10: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

Step 9: Sill

Not sure? ☎ 1800 633 136

If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.

Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.

We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.

Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.

This type of wall shown does not require shutter stops.

* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.

This type of wall shown requires shutter stops.

Order form sample:Order form sample:

Step 9: Photo/Diagram assist (optional)

Order form sample:

Opening complete with sill

Opening without sill

Shutter stop not required

Not sure? ☎ 1800 633 136

If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.

Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.

We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.

Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.

This type of wall shown does not require shutter stops.

* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.

This type of wall shown requires shutter stops.

Order form sample:Order form sample:

Step 9: Photo/Diagram assist (optional)

Order form sample:

Opening complete with sill

Opening without sill

Shutter stop not required

The window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.

Step 8: Photo/Diagram assist (optional)

If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.

Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.

Not sure? ☎ 1800 633 136

If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.

Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.

We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.

Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.

This type of wall shown does not require shutter stops.

* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.

This type of wall shown requires shutter stops.

Order form sample:Order form sample:

Step 9: Photo/Diagram assist (optional)

Order form sample:

Opening complete with sill

Opening without sill

Shutter stop not required

Page 11: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

Step 10: Control Methods

AC Electric Motors:• Average life span of 15-17 years

• Wall switch operation

• Connected to the AC mains of the house

• A qualified electrician is required to do the wiring

• Optional extras of remote control and battery backup available

DC Battery Motors:(additional cost - Item Number 210 0000)

• Operates using a rechargeable handset as its power supply

• Handsets need to be recharged like a cell phone on average once a week

• Average life span of the battery is 2 to 4 years

• Average life span of the motor is 7 to 9 years

• Connect these motors yourself without requiring an electrician

• Operates during a power outage

Not sure? ☎ 1800 633 136

If you are unsure or concerned that the provided instructions do not cover your specific application (for example: corner windows, bay windows, oversize windows, etc.), you can still place your order by providing the height and width of the opening (Step 5) and completing the rest of the order form.

Take a photo or draw a diagram of the space you would like your roller shutter to be used. After placing your order at the Special Orders desk, a Bunnings Team Member will send it to us via email or fax, quoting the CSO number.

We will use the information on the order form plus the photo or diagram to manufacture your roller shutters. This is in addition to our customer support line.

Step 8: SillThe window sill allows the roller shutter to sit and close upon it. If your windows don’t have sills, you will need to use separate shutter stops.

This type of wall shown does not require shutter stops.

* If using packing profile, ensure that your roller shutter has a closing point to sit on. If not, order shutter stops.

This type of wall shown requires shutter stops.

Order form sample:Order form sample:

Step 9: Photo/Diagram assist (optional)

Order form sample:

Opening complete with sill

Opening without sill

Shutter stop not required

Page 12: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

Step 12: Select Colours

Blue Ridge

Use our online Colour Visualiser to match the colours with the look of your house.

Colours are subject to printing variations. To see the exact colours visit our displays at Bunnings Warehouse or use Colourbond colours catalogue.

Jasper

Ezy-Fit Roller Shutters are available in 9 colours:

Evening Haze

Monument

Shale Grey

Woodland GreyClassic Cream

Paperbark Natural White

Step 13: Additional Extras

Remote Control for AC Electric Motors:(additional cost - Item Number 104 1098)

With the remote control, you can operate your shutters from your sofa or bed. Remote control comes with the hand-held control unit in the photo. (this replaces the wall switch)

Battery Backup (UPS) for AC Electric Motors:(additional cost - Item Number 104 1127)The battery backup is beneficial in instances of electrical power loss where shutter use may still be needed and is recommended for bedrooms or doorways. One shutter will function for approximately 8 cycles. A fully qualified electrician is required to wire this.

If packing profile is needed, measure from the face of the wall to the window frame or handle and write the measurement on the order form.

Step 5: MeasurementHeight

Measure the height on the face of the wall from top to bottom of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Measure the width from left to right of the opening and write the exact measurement on the order form.

Important: Do not add or subtract off the opening measurements taken.

Width

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Top view

Order form sample:

Order form sample:

Step 6: Clearance above the opening(Face-Fit and Limited only)If there is an obstruction (like eave, veranda, pergola, pipe, etc.) above the opening, measure the distance from the top of the opening to the obstruction. If the distance is less than 300 mm, write the measurement on the order form.

Examples:

Do not fill this part of the order form. (Keep this section blank)

Order form samples:

Step 7: Packing profile (Face-Fit and Limited only)

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Window frames or handles that protrude past the exterior wall can interfere with the operation of the shutter. Packing profiles are used to provide a gap between the roller shutter and the face of the exterior wall to clear the handle or window frame.

Example:

O Roller shutter blocked by the door handle PPacking profile used to provide a gap

Window

Wall

Wall

Window

Roof

Eave

Wall

Window

Ope

ning

Hei

ght

Pelm

et B

ox

Rol

ler

Shut

ter

Hei

ght

Window

Wall

Roof

Ope

ning

Hei

ght

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Eave

Dis

tanc

e

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Roof

Wall

Window

Window

Wall

Eave

Dis

tanc

e

Ope

ning

Hei

ght

Roof Roof

Eave

Dis

tanc

eO

peni

ng H

eigh

t

Window

Wall

Eave

Pelmet Box

Pelm

et B

ox

Rolle

r Sh

utte

r H

eigh

t

Rol

ler

Shut

ter

Hei

ght

Roller shutter - Shutter guide

Roller shutter - Pelmet

Roller shutter - Pelmet

Roller shutter installedon the face of wall

Wall

Roller shutter installedwithin the opening

Wall

Width

Window

Hei

ght

Window

Hei

ght

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

At least 22 mmfrom the windowIdeal: 35 mm

At least 22 mmfrom the windowIdeal: 35 mm

In-r

evea

l ope

ning

hei

ght

mea

sure

d in

side

the

ope

ning

Wall

Window

Face-Fit Installation In-Reveal Installation

Roller shutterguide

Window

Measured distance

Packing profile

Roller shutter

Handle, mullion, or frameProtruding past the face of wall

Minimum recess of 30 mmrequired within the opening

Wall

Minimum recess of 30 mmrequired within the opening

Window

WallWindow

Window Wall

Roller shutter limitedby a wall on one side

Measure on the face of wall, from top to the sill

Roller shutter installedon the face of wall

Roller shutter installedwithin the opening

Roof

Not sure? ☎ 1800 633 136 Not sure? ☎ 1800 633 136

Side view

Measure outside on the face of wall, from top to bottom of the architrave

Window frame protruding the

face of wall

Roof

Measure on the face of wall, from top to the sill

Window

Window frame protruding

the face of wall

Measure outside on the face of wall, from left to right of the architrave

Width

Width

Wall

Hei

ght

Hei

ght

Page 13: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

Customer Name: Phone: ( ) Mobile: Customer's Delivery Address: Suburb: Residential or Business Address: State: Postcode: Email Address (required for tracking):

Select and Measure instructions must be used to complete order form correctly. Make sure the fields with the asterisk (*) are completed.

- - - -Special Orders Team Member to complete and fax or email to supplier. No orders will commence manufacturing until order form is received- - - -

Order Summary DIY & Install gen6-v1

Description Item Number Item Price Qty Item Total

Total Price (including GST)

Team Member Name: Order Date: Estimated Delivery Date*:

CSO Number: Store: *Allow 15 working days for delivery

Fax Number: (03) 9798 8473 E-mail: [email protected] (Please read all disclaimers on rear before ordering).

* 1. Roller shutter no. 1

* 1. Roller shutter no. 2 * 1. Roller shutter no. 3 Area Name: Area Name: Area Name: * 2. Wall type: * 2. Wall type: * 2. Wall type: Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:

Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:

Brick / Precast Concrete Weatherboard / Cladding Rendered Foam / Blueboard Other:

* 3. Window type: * 3. Window type: * 3. Window type: Double-hung Sliding Fixed

Awning Casement Hopper

Double-hung Sliding Fixed

Awning Casement Hopper

Double-hung Sliding Fixed

Awning Casement Hopper

* 4. Installation: * 4. Installation: * 4. Installation: Face-Fit In-Reveal Limited Face-Fit In-Reveal Limited Face-Fit In-Reveal Limited * 5. Measurements: * 5. Measurements: * 5. Measurements: Height (mm) ↕ Height (mm) ↕ Height (mm) ↕

Width (mm) ↔ Width (mm) ↔ Width (mm) ↔

6. Clearance above opening: 6. Clearance above opening: 6. Clearance above opening: Distance (mm) Distance (mm) Distance (mm) 7. Packing profile: 7. Packing profile: 7. Packing profile: Distance (mm) Distance (mm) Distance (mm)

8. Photo/Diagram assist (optional)

8. Photo/Diagram assist (optional)

8. Photo/Diagram assist (optional) E-mail Fax Post E-mail Fax Post E-mail Fax Post

9. Sill:

9. Sill:

9. Sill: Shutter stop required Shutter stop required Shutter stop required * 10. Control method: * 10. Control method: * 10. Control method: AC Electric DC Battery (additional cost)

AC Electric DC Battery (additional cost)

AC Electric DC Battery (additional cost)

* 11. Control side: * 11. Control side: * 11. Control side: Left Right Left Right Left Right * 12. Colour: * 12. Colour: * 12. Colour: Slats: Pelmet/Guides:

Slats: Pelmet/Guides:

Slats: Pelmet/Guides:

13. Additional extras (AC Only) [Available at an additional cost]

13. Additional extras (AC Only) [Available at an additional cost]

13. Additional extras (AC Only) [Available at an additional cost]

Remote Control Battery Backup Remote Control Battery Backup Remote Control Battery Backup

Page 14: Included… · the opening. Step 4: Select yourt installation type The following are the 3 different installation types. Face-Fit and In-Reveal options are the 2 most common, where

ROLLER SHUTTER COLOURSBlue Ridge

WarrantyTerms & Conditions

Applications

Jasper Evening Haze Monument Shale Grey Woodland GreyClassic Cream Paperbark Natural White

15 Years - All roller shutter parts and components

5 Years - AC motor and AC wall switch

3 Years - DC motor

2 Years - AC remote control and battery backup (optional extras)

1 Year - DC motor handset and battery

* Please see website for details on maintaining warranty

1. Direct Delivery applies for Major Cities of Australia as per the ASGC-RA. Areas that are not Major Cities, or some properties/farms may not be able to receive direct delivery, which will result in a delivery to a local depot or the Bunnings Store.

2. 15 working days’ turnaround applies for Major Cities of Australia as per ASGC-RA. Areas that are not Major Cities may incur delays in delivery.

3. Free delivery only covers the first delivery attempt; no second delivery will be done or re/direct allowed without an incurred cost.

4. Deliveries cannot be scheduled to an exact time or day. Package tracking details are provided via email after the package has been booked so that customers are able to make themselves available for the delivery.

5. Authority to leave the products in a safe location on your premises has been granted to the carriers in the event that you are not able to sign for your delivery. In the event that the carrier cannot leave the products on your premises, they will need to be collected from a local depot.

6. All damaged claims must be made within 48 hours of the product being delivered/picked up.

Please contact us or visit our website for further clarification on any information.

Copyright © Ultimate Shutter Pty Ltd 2016 All Rights Reserved.

Windows, doorways, bars, room dividers, roof windows, canteens, pergolas, verandas, cabanas, bay windows, garden windows, curved windows, atriums, patios, closets, cupboards, garages, trucks, vans and partitioning areas.

The below terms are a summary only. Please visit the Ezy-Fit website for detailed terms and conditions.