your conversion aid: from dk-ts to ts it. - rittal · rittal conversion aid dk-ts/ts it 3 wh d u...

Your conversion aid: From DK-TS to TS IT.

nextlevelfor data centre

DK-TS becomes TS IT.What this means for you: More than 100 practical system solutions are now available immediately off the shelf, or within a few days. This creates flexibility and reliability when assembling and extending your IT infrastructure. Countless accessory parts which were previously ordered separately are now included with the supply, while others support simple, tool-free installation without the need for additional mounting accessories. However, not all racks allow 1:1 conversion. Please check the scope of supply depending on your requirements.

Old: DK-TS New: TS IT

7820.Empty enclosure, glazed front door, one-part sheet steel door at the rear, IP 55

.790 Empty enclosure, glazed front door, one-part sheet steel door at the rear, IP 55

.1201)

Enclosure with 482.6 mm (19˝) installation, glazed front door, sheet steel rear doorDimensions mm 7821.

Empty enclosure, sheet steel front door, one-part sheet steel door at the rear, IP 55

.1411)

1) Two-part rear door, from H ≥ 1800 mm

W H D U Model No. DK-TS

482.6 mm (19˝) installation

Model No.TS IT

482.6 mm (19˝) installationIT Infra-structure brochure,

page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

600 800 600 15 7820.1007821.100 ■

5525.790 ■ 51

5525.120 ■ 32

600 1000 600 20 7820.200 7821.200 ■

600 1200 600 24 7820.3007821.300 ■

5526.790 ■ 51

5526.120 ■ 32

5526.141 ■ 38

600 1400 600 29 7820.400 7821.400 ■

600 1400 800 29 7820.410 7821.410 ■

600 1600 600 33 7820.500 7820.500 ■

600 1600 800 33 7820.510 7821.510 ■

600 1800 600 38 7820.600 7821.600 ■

5527.790 ■ 51

5527.120 ■ 32

5527.141 ■ 38

600 1800 800 38 7820.610 7821.610 ■

5528.790 ■ 51

5528.120 ■ 33

5528.141 ■ 38

600 1800 900 38 7820.620 7821.620 ■

� Included with the supply

Further details about TS IT rack configuration can be found in the IT infrastructure brochure.

2 Rittal Conversion aid DK-TS/TS IT



Model No.TS IT


page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

600 2000 600 42 7820.700 7820.700 ■

5529.790 ■ 51

5529.120 ■ 33

5529.141 ■ 39

600 2000 800 42 7820.710 7821.710 ■

5530.790 ■ 52

5530.120 ■ 33

5530.141 ■ 39

600 2000 900 42 7820.720 7821.720 ■

600 2000 1000 42 7820.730 7821.730 ■

5508.790 ■ 52

5508.120 ■ 33

5508.141 ■ 39

600 2000 1200 42

7820.830 7821.830 ■

5510.790 ■ 52

5510.120 ■ 33

7820.832 7821.832 ■1)

5510.141 ■ 39

600 2200 600 47 7820.800 7821.800 ■

600 2200 800 47 7820.810 7821.810 ■

5531.790 ■ 52

5531.120 ■ 34

5531.141 ■ 39

600 2200 1200 47

7820.880 7821.880 ■

5515.790 ■ 52

5515.120 ■ 34

7820.882 7821.882 ■1)

5515.141 ■ 40

800 1000 600 20 7820.2407821.240 ■

800 1200 600 24 7820.3407821.340 ■

800 1200 800 24 7820.350 ■

5503.790 ■ 52

5503.120 ■ 32

5503.141 ■ 38

800 1200 900 24 7820.355 7821.355 ■

800 1200 1000 24 7820.360 ■

5504.790 ■ 52

5504.120 ■ 32

5504.141 ■ 38

800 1400 600 29 7820.440 7821.440 ■

800 1600 600 33 7820.540 7821.540 ■

� Included with the supply 1) With side panels

3Rittal Conversion aid DK-TS/TS IT




Model No.TS IT


page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

800 1800 600 38 7820.640 7821.640 ■

800 1800 800 38 7820.650 7821.650 ■

5505.790 ■ 52

5505.120 ■ 33

5505.141 ■ 39

800 1800 1000 38 7820.670 7821.670 ■

800 2000 600 42 7820.740 7821.740 ■

5506.790 ■ 52

5506.120 ■ 33

5506.141 ■ 39

800 2000 800 42 7820.750 7821.750 ■

5507.790 ■ 52

5507.120 ■ 33

5507.141 ■ 39

800 2000 900 42 7820.760 7821.760 ■

800 2000 1000 42 7820.770 7821.770 ■

5509.790 ■ 53

5509.120 ■ 34

5509.141 ■ 39

800 2000 1200 42

7820.890 7821.890 ■

5511.790 ■ 53

5511.120 ■ 34

7820.892 7821.892 ■1)

5511.141 ■ 39

800 2200 600 47 7820.840 7821.840 ■

800 2200 800 47 7820.850 7821.850 ■

5512.790 ■ 52

5512.120 ■ 34

5512.141 ■ 40

800 2200 900 47 7820.860 7821.860 ■

800 2200 1000 47 7820.870 7821.870 ■

5514.790 ■ 53

5514.120 ■ 34

5514.141 ■ 40

800 2200 1200 47

7820.950 7821.950 ■

5516.790 ■ 53

5516.120 ■ 34

5516.141 ■ 40

7820.952 7821.952 ■1)

5516.790 ■ 53

5516.120 ■ 34

5516.141 ■ 40

� Included with the supply 1) With side panels



W H D U Model No. DK-TS Variant


Model No.TS IT


page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

482.6 mm (19˝)

swing frame

482.6 mm (19˝) mount-ing angles

482.6 mm (19˝) mount-

ing frame

482.6 mm (19˝) swing

frame

600 1200 + 100 600 24 7830.100 V1 ■2) 5526.151 ■ 44

800 1200 + 100 800 24 7830.110 V1 ■ 5503.151 ■ 44

800 1200 + 100 1000 24 7830.130 V2 ■5504.181 ■3) 41

5504.151 ■ 44

800 1800 + 100 800 38 7830.850 V1 ■3) 5505.151 ■ 45

800 2000 + 100 800 40 7830.670 V3 ■3) 5507.170 ■ 48

800 2000 + 100 800 42

7830.200 V1 ■

5507.151 ■ 45

7830.250 V1 ■3)

7830.202 V1 ■1)

7830.550 V1 ■3)

7830.260 V1 ■3) 4)

800 2000 + 100 1000 42

7830.230 V1 ■5509.151 ■ 45

7830.240 V1 ■3)

7830.330 V2 ■5509.161 ■ 47

7830.335 V2 ■3)

800 2200 + 100 800 47 7830.270 V1 ■3) 5512.151 ■ 46

800 2200 + 100 1000 47 7830.380 V2 ■3)5514.181 ■3) 43

5514.151 ■ 46

V1Enclosure with 482.6 mm (19˝) installation, glazed front door, sheet steel rear door, vented base/plinth, with/without side panels

.1515)Enclosure with 482.6 mm (19˝) installation, glazed front door, sheet steel rear door, vented base/plinth, with side panels

.1615)

Enclosure with 482.6 mm (19˝) installation, vented aluminium/sheet steel door at the front, vented sheet steel door at the rear, vented base/plinth, with side panels

.170Enclosure with 482.6 mm (19˝) installation, glazed front door, rear panel, vented base/plinth, with side panels

V2

Enclosure with 482.6 mm (19˝) installation, vented glazed front door, vented sheet steel rear door, vented base/plinth, with/without side panels .1815)

Enclosure with 482.6 mm (19˝) installation, vented aluminium/sheet steel door at the front, vented sheet steel door at the rear

Dimensions V3 Enclosure with 482.6 mm (19˝) installation, glazed front door, rear panel, vented base/plinth

Old: DK-TS, pre-configured New: TS IT, pre-configured

1) In addition, light, door-operated switch, socket strip, junction box, component shelf are supplied loose2) With mounting angles at the front3) Without side panels4) Divided doors at the front and rear5) Rear door, two-part, from H ≥ 1800 mm





Model No.TS IT


page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

600 1200 1000 24 7831.433 ■

600 2000 1000 42 7831.438 ■5508.181 ■ 42

5508.110 ■ 36

600 2000 1200 42 7831.481 ■5510.181 ■ 42

5510.110 ■ 36

600 2200 1000 47 7831.442 ■5513.181 ■ 43

5513.110 ■ 37

800 2000 1000 42 7831.446 ■5509.181 ■ 42

5509.110 ■ 36

800 2000 1200 42

7831.485 ■

5511.181 ■ 427831.730 ■1)2)

7831.732 ■2)

7831.740 ■1)4)5511.110 ■ 36

7831.742 ■2)4)

800 2200 1000 477831.752 ■ 5514.110 ■ 37

7831.762 ■4) 5514.181 ■ 43

Enclosure with 482.6 mm (19˝) installation, vented sheet steel door at the front and rear

.1103) Enclosure with 482.6 mm (19˝) installation, vented aluminium/sheet steel door at the front, vented sheet steel door at the rearDimensions mm .1813)

Old: DK-TS, server enclosures New: TS IT, vented

1) With side panels2) Rear door, two-part3) Rear door, two-part, from H ≥ 1800 mm4) Colour RAL 9005





Model No.TS IT


page

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

482.6 mm (19˝)

mounting angles

482.6 mm (19˝)

mounting frame

without 482.6 mm

(19˝) installation

600 2000 1000 42 7831.810 ■ 5508.131 ■ 50

600 2000 1200 427831.812 ■

5510.131 ■ 507831.813 ■1)

800 2000 800 42 7831.830 ■ 5507.131 ■ 50

800 2000 1000 42 7831.800 ■ 5509.131 ■ 50

800 2000 1200 427831.802 ■

5511.131 ■ 507831.803 ■1)

Dimensions mmEnclosure with 482.6 mm (19˝) installation, glazed front door, sheet steel rear door, with/without side panels

.131Enclosure with 482.6 mm (19˝) installation, glazed front door, one-part sheet steel door at the rear

New: TS IT, IP 55Old: DK-TS, HPC enclosures,IP 55

1) With side panels

Please note:◾ The following tables help you to find enclosures and accessories in the TS IT product range with identical or similar functions to the DK-TS

range, enabling you to carry out a new configuration based on TS IT. ◾ Components and accessory configurations cannot be transferred on a 1:1 basis from the DK-TS range to the TS IT range, or vice versa. ◾ All configurations must be recreated and tested in accordance with the customer's requirements.◾ Details of backward compatibility for the new TS IT accessories can be found in the sales document “Make IT easy”, or alternatively,

discussed with your customer advisor.

DK-TS accessory range

Model No. DK/TS Design

Dimensions mmColour Packs of Cat. 34,

pageW H D

Side panels

7824.086 Side panel, lockable – 800 600 RAL 7035 2 pc(s). –


7824.128 Side panel, lockable – 1200 800 RAL 7035 2 pc(s). 536







7824.310 Side panel, plug-type, divided – 2000 1200 RAL 7035 2 pc(s). –



7824.312 Side panel, plug-type, divided – 2200 1200 RAL 7035 2 pc(s). –

8173.235 Side panel, screw-fastened (IP 55) – 800 600 RAL 7035 2 pc(s). 534









optional Side panel, screw-fastened (IP 55) – 2000 1200 RAL 7035 2 pc(s). 534




Gland plate set

Added to the TS IT product range. No previous articles available.

7825.382 Gland plate, multi-piece 800 – 800 Zinc-plated 1 set(s) –






TS IT accessory range

Model No. DK Design


pageW H D

Side panels






5501.000 Side panel, divided, lockable – 1800 800 RAL 7035 1 pc(s). 536

















optional Side panel, screw-fastened (IP 55) – 2000 1200 RAL 7035 2 pc(s). –




Gland plate set

5501.300 Base mount – – 600 RAL 7035 2 pc(s). 524

5502.510 Gland plate, solid 800 – 600 Zinc-plated 1 set(s) 528













Gland plate modules

7825.660 Gland plate, one-piece, vented, with cable entry 600 – 600 Zinc-plated 1 pc(s). –








7825.342 Base frame, divided 600 – 1000 RAL 7035 1 set(s) –


Slide rails

7063.000 Slide rails for mounting angles – – 152 Zinc-plated 2 pc(s). –

7492.300 Slide rails, heavy-duty, 80 kg, for cranked mounting angles – – 300 Zinc-plated 2 pc(s). –





7063.882 Slide rail, depth-variable, 1 U, 80 kg – – 400 – 600 Zinc-plated 2 pc(s). –



7063.740 Slide rails, heavy-duty, 100 kg – – 740 Zinc-plated 2 pc(s). –



pageW H D



Gland plate modules

No follow-on items available in the TS IT range









5001.239 Sliding panel 600 – 150 Zinc-plated 1 pc(s). 528

5001.240 Sliding panel 800 – 150 Zinc-plated 1 pc(s). 528

Slide rails

5501.400 Slide rails, static installation, 30 kg – – 150 Zinc-plated 2 pc(s). 687






5501.460 Slide rails, depth-variable, 482.6 mm (19˝), 80 kg – – 400 – 600 Zinc-plated 2 pc(s). 687

5501.480 Slide rails, depth-variable, 482.6 mm (19˝), 150 kg – – 600 – 900 Zinc-plated 2 pc(s). 687

Model No. DK Design


pageW H D





pageW H D

Component shelves

7119.140 Component shelf 1 U, static installation, 10 kg – – 140 RAL 7035 1 pc(s). 630



7147.035 Side parts, 3 U, static installation, 30 kg – – 400 RAL 7035 2 pc(s). –

7000.620 Component shelf, static installation, 30 kg – – 413 RAL 7035 1 pc(s). –

7148.035 Component shelf 2 U, 25 kg – – 300 RAL 7035 1 pc(s). –

7143.035 Component shelf, 482.6 mm (19˝) installations, 50 kg – – 300 RAL 7035 1 pc(s). –

7144.035 Component shelf, 482.6 mm (19˝) installations, 50 kg – – 400 RAL 7035 1 pc(s). 629



7063.858 Installation kit, depth-variable, for 482.6 mm (19˝) component shelf, 50 kg – – 390 – 590 Zinc-plated 1 set(s) –

7063.710 Component shelf 1/2 U, depth-variable, 50 kg – – 400 – 600 RAL 7035 1 pc(s). –

3861.580 Component shelf 1 U, depth-variable, 50 kg – – 488 – 750 RAL 7035 1 pc(s). –






7828.950 Compon. shelf, heavy-duty, 75 kg, static install., for cranked mount. angles – – 478 Zinc-plated 1 pc(s). –

7145.535 Compon. shelf, heavy-duty, 100 kg, static install., for cranked mount. angles – – 470 RAL 7035 1 pc(s). –

7828.951 Compon. shelf, heavy-duty, 75 kg, static install., for L-shaped mount. angles – – 480 Zinc-plated 1 pc(s). –

7063.895 Component shelf, heavy-duty, 482.6 mm (19˝) installations, 100 kg – – 500 RAL 7035 1 pc(s). –










7000.625 Component shelf, complete set, pull-out, 50 kg – – 395 – 645 RAL 7035 1 set(s) –


7061.000 Telescopic slides for component shelves, for full withdrawal, 50 kg – – 400 Zinc-plated 2 pc(s). 632
























Model No. DK Design


pageW H D

Component shelves

5501.615 Component shelf 2 U, static installation, 25 kg – – 250 RAL 9005 1 set(s) 631

5501.625 Component shelf 2 U, static installation, 25 kg – – 400 RAL 9005 1 set(s) 631

5501.655 Component shelf, depth-variable, static installation, 50 kg – – 400 – 600 RAL 9005 1 set(s) 630




5501.675 Component shelf, depth-variable, pull-out, 50 kg – – 400 – 600 RAL 9005 1 set(s) 630








pageW H D

Air baffle plates, infill panels


7151.206 Air baffle plates for TS 600 2000 – RAL 7035 2 pc(s). –7151.208 Air baffle plates for TS 800 2000 – RAL 7035 2 pc(s). –


7827.530 Infill panel, hinged, curved 800 1600 – – 2 pc(s). –7827.532 Infill panel, hinged, curved 800 1800 – – 2 pc(s). –7827.534 Infill panel, hinged, curved 800 2000 – – 2 pc(s). –7827.536 Infill panel, hinged, curved 800 2200 – – 2 pc(s). –7827.518 Infill panel, hinged, straight 800 1800 – – 2 pc(s). –7827.520 Infill panel, hinged, straight 800 2000 – – 2 pc(s). –7827.522 Infill panel, hinged, straight 800 2200 – – 2 pc(s). –

Cable management and drawers

7827.320 Cable duct HD for TS/TE 95 42 U 235 RAL 7035 1 pc(s). –Added to the TS IT product range. No previous articles available.

7827.310 Cable duct HD for TS/TE 95 24 U 235 RAL 7035 1 pc(s). –7858.200 Cable route, vertical, for TS 200 2000 – Zinc-plated 1 pc(s). –7257.200 Cable management panel 482.6 mm (19˝), with 5 metal rings – 1 U – RAL 7035 1 pc(s). 6747159.035 Cable management panel 482.6 mm (19˝), with 5 plastic rings – 1 U – RAL 7035 1 pc(s). 6747257.035 Cable management panel 482.6 mm (19˝), with 5 metal rings – 1 U – RAL 7035 1 pc(s). 6747255.035 Cable management panel 482.6 mm (19˝), with 5 plastic rings – 1 U – RAL 7035 1 pc(s). –7257.100 Cable management panel 482.6 mm (19˝), with 5 metal rings – 2 U – RAL 7035 1 pc(s). 6747257.050 Cable management panel with cable routing bars, 482.6 mm (19˝) – 1 U – RAL 7035 1 pc(s). 6757257.150 Cable management panel with cable routing bars, 482.6 mm (19˝) – 2 U – RAL 7035 1 pc(s). –7158.035 Cable management panel 482.6 mm (19˝), with flap and cut-outs – 2 U – RAL 7035 1 pc(s). 6757149.135 Cable routing channel, 482.6 mm (19˝) – 1 U – RAL 7035 1 pc(s). 6757140.535 Cable entry panel, 482.6 mm (19˝) – 1 U – RAL 7035 1 pc(s). –7150.535 Cable entry panel, 482.6 mm (19˝) – 2 U – RAL 7035 1 pc(s). –7064.100 Cable manager, basic kit – – – RAL 7035 8 pc(s). –7064.110 Cable manager, maxi kit – – – RAL 7035 20 pc(s). –7282.135 Drawer, 2 U, for a 482.6 mm (19˝) attachment level – 2 U 250 RAL 7035 1 pc(s). –7282.035 Drawer, 2 U, for a 482.6 mm (19˝) attachment level – 2 U 427 RAL 7035 1 pc(s). 6917283.035 Drawer, 3 U, for a 482.6 mm (19˝) attachment level – 3 U 427 RAL 7035 1 pc(s). 6917218.035 Shunting ring, plastic 70 44 – RAL 7035 10 pc(s). –7228.035 Shunting ring, plastic 95 50 – RAL 7035 10 pc(s). –

7219.035 Shunting ring, plastic 105 70 – RAL 7035 10 pc(s). –

7111.252 Distributor clip for panels – – – Zinc-plated 4 pc(s). –7111.250 Distributor clip, horizontal, for mounting angles and mounting frames – – – Zinc-plated 4 pc(s). –


482.6 mm (19˝) installation system

7827.080 Mounting angles 482.6 mm (19˝) for TS, cranked – 15 U/800 – Zinc-plated 2 pc(s). –7827.100 Mounting angles 482.6 mm (19˝) for TS, cranked – 20 U/1000 – Zinc-plated 2 pc(s). –7827.120 Mounting angles 482.6 mm (19˝) for TS, cranked – 24 U/1200 – Zinc-plated 2 pc(s). –7827.140 Mounting angles 482.6 mm (19˝) for TS, cranked – 29 U/1400 – Zinc-plated 2 pc(s). –7827.160 Mounting angles 482.6 mm (19˝) for TS, cranked – 33 U/1600 – Zinc-plated 2 pc(s). –7827.180 Mounting angles 482.6 mm (19˝) for TS, cranked – 38 U/1800 – Zinc-plated 2 pc(s). –7827.200 Mounting angles 482.6 mm (19˝) for TS, cranked – 42 U/2000 – Zinc-plated 2 pc(s). –7827.220 Mounting angles 482.6 mm (19˝) for TS, cranked – 47 U/2200 – Zinc-plated 2 pc(s). –7856.710 Mounting frame, 482.6 mm (19˝) for TS 600 11 U/600 – Zinc-plated 1 pc(s). –7856.713 Mounting frame, 482.6 mm (19˝) for TS 600 24 U/1200 – Zinc-plated 1 pc(s). –7856.725 Mounting frame, 482.6 mm (19˝) for TS 800 24 U/1200 – Zinc-plated 1 pc(s). –



Model No. DK Design


pageW H D

Air baffle plates, infill panels

5501.805 Air baffle plate for TS IT mounting angles 600 2000 – RAL 9005 1 set(s) 6925501.815 Air baffle plate for TS IT mounting angles 800 2000 – RAL 9005 1 set(s) 6925501.825 Air baffle plate for TS IT mounting angles 600 2200 – RAL 9005 1 set(s) 6925501.835 Air baffle plate for TS IT mounting angles 800 2200 – RAL 9005 1 set(s) 6925501.855 Air baffle plate for TS IT mounting frame 600 1200 – RAL 9005 1 set(s) –5501.865 Air baffle plate for TS IT mounting frame 800 1200 – RAL 9005 1 set(s) –5501.875 Air baffle plate for TS IT mounting frame 600 1800 – RAL 9005 1 set(s) –5501.885 Air baffle plate for TS IT mounting frame 800 1800 – RAL 9005 1 set(s) –5501.905 Air baffle plate for TS IT mounting frame 600 2000 – RAL 9005 1 set(s) –5501.915 Air baffle plate for TS IT mounting frame 800 2000 – RAL 9005 1 set(s) –5501.925 Air baffle plate for TS IT mounting frame 600 2200 – RAL 9005 1 set(s) –5501.935 Air baffle plate for TS IT mounting frame 800 2200 – RAL 9005 1 set(s) –


Cable management and drawers

5502.105 Cable duct – 2000 – RAL 9005 1 pc(s). 6735502.145 Cable duct – 2200 – RAL 9005 1 pc(s). 673

No replacement

5502.120 Cable route 120 2000 – 2200 – RAL 9005 1 pc(s). 672

5502.205 Cable management panel 482.6 mm (19˝), with 5 metal rings – 1 U – RAL 9005 1 pc(s). 674



5502.225 Cable management panel with cable routing bars, 482.6 mm (19˝) – 1 U – RAL 9005 1 pc(s). 675

5502.235 Cable management panel 482.6 mm (19˝), with flap and cut-outs – 2 U – RAL 9005 1 pc(s). 6755502.245 Cable routing channel, 482.6 mm (19˝) – 1 U – RAL 9005 1 pc(s). 6755502.255 Cable entry panel, 482.6 mm (19˝) – 1 U – RAL 9005 1 pc(s). 6775502.265 Cable entry panel, 482.6 mm (19˝) – 2 U – RAL 9005 1 pc(s). 677

5502.405 Cable manager – – – RAL 9005 20 pc(s). 670

5502.305 Drawer, 2 U, for a 482.6 mm (19˝) attachment level – 2 U – RAL 9005 1 pc(s). 691

5502.325 Drawer, 3 U, for a 482.6 mm (19˝) attachment level – 3 U – RAL 9005 1 pc(s). 691

7112.000 Cable shunting ring, metal 85 125 – Zinc-plated 10 pc(s). 670

7111.000 Cable shunting ring, metal 65 125 – Zinc-plated 10 pc(s). 6707111.900 Cable shunting ring, metal 43 85 – Zinc-plated 10 pc(s). 6707111.222 Cable routing bars, all-round attachment – 4 U – RAL 9005 4 pc(s). 6735502.115 Cable finger 6 U – 6 U – RAL 9005 14 pc(s). 6745502.155 Nylon loop tape holder – – – Black 10 pc(s). 668


7827.081 TS IT mounting angle, L-shaped – 15 U – Zinc-plated 2 pc(s). –7827.101 TS IT mounting angle, L-shaped – 20 U – Zinc-plated 2 pc(s). –7827.121 TS IT mounting angle, L-shaped – 24 U – Zinc-plated 2 pc(s). –7827.141 TS IT mounting angle, L-shaped – 29 U – Zinc-plated 2 pc(s). –7827.161 TS IT mounting angle, L-shaped – 33 U – Zinc-plated 2 pc(s). –7827.181 TS IT mounting angle, L-shaped – 38 U – Zinc-plated 2 pc(s). 6857827.201 TS IT mounting angle, L-shaped – 42 U – Zinc-plated 2 pc(s). 6857827.221 TS IT mounting angle, L-shaped – 47 U – Zinc-plated 2 pc(s). –





7856.716 Mounting frame, 482.6 mm (19˝) for TS 600 38 U/1800 – Zinc-plated 1 pc(s). –






7831.611 Mounting angles, metric for TS – 600/17 SU – Zinc-plated 2 pc(s). –




7827.490 Installation bracket TS for mounting angles into TS, 482.6 mm (19˝), side – – 800 Zinc-plated 2 pc(s). –

7827.550 Installation kit TS, width-variable, 482.6 mm (19˝)/metric in TS – – 800 Zinc-plated 1 set(s) –



7827.600 Depth stays as installation kit for mountig angles, 482.6 mm (19˝) 800 – 600 Zinc-plated 4 pc(s). –







7827.554 Mounting frame 54 U 800 2000 – Zinc-plated 1 set(s) –

Doors and accessories

8610.680 Glazed door, 1-part, with lock, 180° 600 1800 – – 1 pc(s). –






7824.205 Sheet steel door, 1-part, with swivel handle and 180° hinges 600 2000 – RAL 7035 1 pc(s). –





7824.183 Sheet steel door, vented, 1-part, with swivel handle and 180° hinges 600 1800 – RAL 7035 1 pc(s). –





7824.201 Glazed door, vented, 1-part, with comfort handle and 180° hinges 600 2000 – RAL 7035 1 pc(s). 550



7824.360 Sheet steel door, vented, 2-part, with comfort handle and 130° hinges 600 2000 – – 1 pc(s). –



7816.360 Sheet steel door, 2-part, with comfort handle and 130° hinges 600 2000 – – 1 pc(s). –





7824.280 Sheet steel glazed door, 2-part, with comfort handle and 180° hinges 800 2000 – – 1 pc(s). –

7824.282 Sheet steel glazed door, 2-part, with comfort handle and 180° hinges 800 2200 – – 1 pc(s). –

7824.490 All-glass door, 2-part, with comfort handle and 180° hinges 800 2000 – – 1 pc(s). –



pageW H D




5501.242 Mounting frame TS, 482.6 mm (19˝), front 600 1800 – RAL 9005 1 pc(s). –5501.245 Mounting frame TS, 482.6 mm (19˝), rear 600 1800 – RAL 9005 1 pc(s). –5501.252 Mounting frame TS, 482.6 mm (19˝), front 800 1800 – RAL 9005 1 pc(s). –5502.255 Mounting frame TS, 482.6 mm (19˝), rear 800 1800 – RAL 9005 1 pc(s). –5501.262 Mounting frame TS, 482.6 mm (19˝), front 600 2000 – RAL 9005 1 pc(s). –5501.265 Mounting frame TS, 482.6 mm (19˝), rear 600 2000 – RAL 9005 1 pc(s). –5501.272 Mounting frame TS, 482.6 mm (19˝), front 800 2000 – RAL 9005 1 pc(s). –5501.275 Mounting frame TS, 482.6 mm (19˝), rear 800 2000 – RAL 9005 1 pc(s). –5501.282 Mounting frame TS, 482.6 mm (19˝), front 600 2200 – RAL 9005 1 pc(s). –5501.285 Mounting frame TS, 482.6 mm (19˝), rear 600 2200 – RAL 9005 1 pc(s). –5501.292 Mounting frame TS, 482.6 mm (19˝), front 800 2200 – RAL 9005 1 pc(s). –5501.295 Mounting frame TS, 482.6 mm (19˝), rear 800 2200 – RAL 9005 1 pc(s). –


The various TS IT rack design variants are optionally available with two 482.6 mm (19˝) mounting levels in the form of mounting angles on support strips (15000 N), with a 482.6 mm (19˝) mounting frame (10000 N), or with no interior installation at all, for individual population. Within the mounting angle variants, alternative installation dimensions (21˝, 23˝, 24˝) are also supported, depending on the rack width.482.6 mm (19˝) configurations in conjunction with mounting plates or partial installations can still be achieved by using the L-shaped 482.6 mm (19˝) mounting angles (Cat 34, page 685).For 800 mm enclosure width, please use installation bracket 7827.480 (Cat. 34, page 685).For 600 mm enclosure width, please use TS punched section with mounting flange (inner level) as an installation kit (Cat. 34, page 606 – 607).

Doors and accessories

Within the new TS IT variant spectrum, a wide range of variants with different door designs are available. Where required, alternative supply forms may be requested as special orders.

Model No. DK Design


pageW H D





pageW H D

Roof plates/roof-mounted fans

7968.035 Fan mounting plate for TS 600 – 800/1000/1200 RAL 7035 1 pc(s). 438

7986.035 Fan mounting plate for TS 800 – 600 RAL 7035 1 pc(s). 438

7826.360 Fan roof, modular, roof plate with cut-out 600 – 1000 RAL 7035 1 pc(s). –


7885.000 Fan roof, modular, fan insert 800 – 600 RAL 7035 1 pc(s). –

2102.190 Fan roof, modular, roof plate solid 600 – 1000 RAL 7035 1 pc(s). –


2102.410 Fan roof, modular, roof plate vented 600 – 1000 RAL 7035 1 pc(s). –


7988.035 Fan mounting plate for TS 800 – 800/1000/1200 RAL 7035 1 pc(s). 438

7858.488 Fan mounting plate for TS with speed control 800 – 800/900/1000 RAL 7035 1 pc(s). –



7886.000 Fan roof, modular, fan insert 800 – 1000 RAL 7035 1 pc(s). –



7526.807 Roof plate, for side cable entry 800 – 1000 RAL 7035 1 pc(s). –

7526.827 Roof plate, for side cable entry 800 – 1200 RAL 7035 1 pc(s). –

7826.588 Roof plate, for cable entry on all sides 800 – 800 RAL 7035 1 pc(s). –

7826.760 Roof plate, vented, without cable entry 600 – 1000 RAL 7035 1 pc(s). –




7826.869 Roof plate, vented, with cable entry 800 – 600 RAL 7035 1 pc(s). 585



7826.866 Roof plate with ventilation holes all-round, with cable entry 800 – 600 RAL 7035 1 pc(s). –



PSM attachment

7856.011 Mounting kit PSM for static installation – – – – 1 set(s) 413

7856.022 Mounting kit PSM for static installation, with cable routing – – – – 1 set(s) 413

7856.023 Mounting kit PSM, adjustable, with cable routing – – – – 1 set(s) 413

Innovations




Model No. DK Design


pageW H D

Roof plates/roof-mounted fans

5502.010Fan mounting plate for 3 fans maximum All TS IT enclosures, apart from the protection category variants (IP 55), are prepared to accommodate a TS IT fan module.

600/800 – 600/1000/1200 RAL 7035 1 pc(s). 437

5502.020Fan mounting plate for 6 fans maximum All TS IT enclosures, apart from the protection category variants (IP 55), are prepared to accommodate a TS IT fan module.

800 – 800/1000/1200 RAL 7035 1 pc(s). 437

The new TS IT already offers a large-scale cable entry as standard. The fan module for TS IT may be retrofitted as an option. It is also possible to have a passive ventilation system by simply raising the cover plate (spacers are already included in the supply).

PSM attachment

7856.029 PSM mounting kit for TS IT – – – Zinc-plated 1 set(s) 413

7856.011 PSM mounting kit for static installation – – – Zinc-plated 1 set(s) 413

7856.022 PSM mounting kit for static installation with cable routing – – – Zinc-plated 1 set(s) 413

7856.023 PSM mounting kit, adjustable, with cable routing – – – Zinc-plated 1 set(s) 413

Innovations

5501.200 Tubular door frame for rear door, vertically divided, solid 600 2000 – Zinc-plated 1 set(s) 549

5501.210 Tubular door frame for rear door, vertically divided, solid 800 2000 – Zinc-plated 1 set(s) 549


� Enclosures� Power Distribution� Climate Control� IT Infrastructure� Software & Services

12.2

014/

E54C

RITTAL GmbH & Co. KG Postfach 1662 � D-35726 HerbornPhone +49(0)2772 505-0 � Fax +49(0)2772 505-2319 E-mail: [email protected] � www.rittal.com

your conversion aid: from dk-ts to ts it. - rittal · rittal conversion aid dk-ts/ts it 3 wh d u...

Documents