Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

The Lack Table Lightbox is a project which uses the same concept as lackenclosures, but is instead intended for photography. By enclosing the rearand side walls with matte white walls to reflect light, and illuminating thearea with strong LEDs mounted above, we can take professional qualityphotos.

This is a remixed lack enclosure design, modified to include M5 bolt holesfor both inner and outer walls that securely fasten on the inner side withnuts.

The overall leg design was extended to 209mm (8.2") to accommodatelarger objects, in my case taller 3D Printers such as the Creality Ender-3and Creality CR-10. The additional extension length brings the total areaheight to 24" once assembled.

This part is designed and shared as part of an on-going project guide at letsprint3d.net which will be published in the near future.

Gadgets > Photo & Video

lightbox table light lack ikea enclosure

LetsPrint3D

Ikea Lack Lightbox

VIEW IN BROWSER

updated 29. 8. 2019 | published 29. 8. 2019

3D M

ODEL

ONLY

178.5 KBupdated 29. 8. 2019

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (International License)

Public Domain

✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

ikea_lack_lightbox_leg.stl