work in progress 1
TRANSCRIPT
Extrude from the plan drawn in AutoCad
Extrusion from plan create the massing.
The lourves are copy to the points of a divided line.
Extrusion from �rst �oor are move into the model.
Pipe along a curve to create handrail.
Extrusion is copied to create staircase
Extrude surface along curve to create I-beam.
The components are assigned layers.
The I-beams are split and group together.
The columns are split by the �oor.
Overview
Floor layer create by using boolean di�erence with the walls.
Wall layer extruded from plan
Steel frame and support layer
I-beam support below the cantilever.
Stair layer.
The I-beam surfave is drawn using polyline and extrude along a curve.
Glass layer.
Door layer
Sliding door.
Door with handle and frame which is create using o�set surface.
Door handle create using pipe and blend.
Lourves layer
Roof layer create using o�set curve before extrude surface
Contour layer create usng create surface and readjust using points on.
Overall model