week 7 ppe rev

7/28/2019 Week 7 PPE Rev

1/15

UOP Field Safety Training UOP/Honeywell Confidential 1PPE

UOP Field Safety Training

Personal

Protective

Equipment


2/15


Types of PPE

Hearing Protection (inpr ior sect ion)

Eye Protection

Head Protection

Body Protection (clothing)

Hand Protection

Foot Protection

Respirator Protection(in next sect ion )


3/15


4/15


Standards and Policy for PPE Use

Standards:Type OSHA Equip. Standard

Eye & Face 29 CFR 1910.133 ASSE Z87.1-2003

Head 29 CFR 1910.135 ISEA Z89.1 - 2003

Foot 29 CFR 1910.136 ASTM Z41 - 2005

Hand 29 CFR 1910.138 -

Note: In Europe, check for CE mark on PPE to verify that it complies withEuropean standards

PolicyUOP Policy 3.5.3 Personal Protective Equipment

Refer to PPE Summary in this Section


5/15


Personal Protective Equipment Video

The Danger Zone

by Summ it Training Sou rce, Inc .

15 m inu tes


6/15


Eye Protection

Safety Glasses shall have side shieldsfor better protection

(Primary Protection)

Goggles with direct ventilation ports areused to block out flying particles.

Chemical goggles must be used to protect from splashes,vapors and fine dust.

Face shields and welding helmets are secondary protection. Wearthem with safety glasses or goggles.

Clean eye protection regularly.


7/15UOP Field Safety Training UOP/Honeywell Confidential 7PPE

Prescription Safety Glasses @ UOP

Reimbursable

Optical Dispenser Locations- In Des Plaines - Eye Care Plaza- In LaGrange Martin R. Dorner O.D.- At UOP Research - visits 2/month

Prescription Safety Glass Order Procedure(UOP@Work-HS&E-PT&E HSE-Form s Tab) or(UOP@Work-HS&E-R&D HSE-Info /Bu llet ins)

- Review Eyeglass & Safety Shoe Purchasing Procedure- Get form from your Department contact

- Supervisor signoff- Make a copy of signed form for your Department contact- Bring form and recent (< 1yr) eyeglass prescription to

Dispenser for ordering



Safety Shoes from UOP

Reimbursable ($125 lim it)

Locations- In 4 Chicagoland locations- Semi-trailer site visits to UOP

R&D Des Plaines/Riverside, McCook, PIC

Safety Shoes Order Procedure

(UOP@Work-HS&E-PT&E HSE-Form s Tab) or

(UOP@Work-HS&E-R&D HSE-Info /Bullet ins )

- Review Eyeglass & Safety Shoe Purchasing Procedure- Get form from your Department contact

- Supervisor signoff- Make a copy of signed form for your Department contact- Bring form to Store or On-site Trailer for purchasing

H d P i



Head ProtectionHard Hats

Dont wear it backwards!

There should be a 1-inch gap between thecrown straps of the suspension and shell.This absorbs impacts.

Inspect the suspension system for signs of

wear. Bump hats are NOT a replacement for hard

hats!

Wear your chin strap, if provided with thehard hat, so that if you do fall, the hard hatwill stay on your head.



PPE Order Forms

Prescription Safety Glasses & Safety Shoes Order

Form- UOP@Work-Resou rces-HS&E-PT&E HSE-Forms Tab- UOP@Work-Resou rces-HS&E-R&D HS&E-Forms/Flow charts-Eyeglasses/Safety Shoe Procedure

B d P t ti



Body ProtectionProtective Clothing

Special Nomex coveralls are required to bewo rn when wo rking in an op erat ing ref ineryprocess uni t .

- This clothing isprimarily for protectionagainst flash fires.

- This clothing is also effective againstchemical exposures.

If protective clothing is required to be worn,consider Heat Stress Disorders whenworking in hot climates and conditions:

- How wil l body heat escape?

- How mu ch t ime wi ll you w ork in the area?



PPE Wrap-up

Demonstration of Equipment Summary of How to Get PPE at UOP

See ordering procedure,

equipment purchasing contacts,

schedules and supplier driving

direction sheets in back of thissection.



Hand Protection

Typically leather at UOP orrubber/neoprene for corrosivechemicals.

Make sure no openings exist betweenshirt sleeve and gloves when workingwith chemicals.

Inspect for holes or worn-out areas. Dont wear gloves while working around

rotating equipment.

See glove selection sheet

in reference section.


15/15


Foot Protection

Make sure the steel toereinforcementon work boots meets national impactstandards.

Use rugged cleated soleson rough orcourse surfaces.

Wear molded non -sl ip solesin indoorslippery conditions.

Replace shoes when worn.

week 7 ppe rev

Documents