· web viewby combining precision engineering and outstanding design options across more than 20...

SECTION 08400ENTRANCES AND STOREFRONTS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2010 - 2016 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Opening glass walls, entrances and storefronts of the following types:1. Wood-framed folding glass wall systems.2. Aluminum-framed folding glass wall systems.3. Wood-framed single track sliding glass wall systems.4. Aluminum-framed single track sliding glass wall systems.5. Monumental thermally broken aluminum framed folding glass wall systems6. Exterior all-glass aluminum-framed window wall systems.7. Interior all-glass aluminum-framed window wall systems.

1.2 RELATED SECTIONS

A. Section 07900 - Sealants: caulking between frames and adjacent construction.

B. Section 08810 - Glass: schedule of glazing.

1.3 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Independently tested data listing performance criteria and Owner's manual including

installation instructions and methods.

C. Product Drawings: Indicate dimensioning, direction of swing, configuration, swing panels, typical head jamb, side jambs and sill details, type of glazing material and handle height.1. Provide elevations indicating rough opening requirements and details for field applied

components.

D. Contract Closeout Submittal: Submit Owner's Manual from manufacturer. Identify Owner's Manual with project name, location and completion date, type and size of unit installed.

E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

1.4 QUALITY ASSURANCE

A. Manufacturer: Provide complete, precision built, engineered, pre-fitted unit by a single source manufacturer with at least 15 years experience in providing folding/sliding door systems for large openings in the North American market.

08400-1

1. The manufacturer must have a quality system registration per ISO 9001:2008.2. The manufacturer must have a environmental management system registration per

ISO 1401:2005.

B. Performance Requirements: Provide from manufacturer that has independently tested typical units. Testing results to include air infiltration in accordance with ASTM E 283, water penetration in accordance with ASTM E 547, structural loading in accordance with ASTM E 330, and forced entry in accordance with AAMA 1303/1304.

C. Thermal Performance: Unit to comply with the U value, rated, certified, labeled or simulated in accordance with NFRC 100, shown in manufacturer's latest published data for the glazing and sill specified.

D. Solar Heat Gain Coefficient: Unit to comply with the solar heat gain coefficient, rated, certified, labeled or simulated in accordance with NFRC 200, shown in manufacturer's latest published data for the glazing specified.

E. Installer Qualifications:1. Installer experienced in the installation of manufacturer's products or other similar

products for large openings.2. Installer to provide reference list of at least 3 projects of similar scale and complexity

successfully completed in the last 3 years.3. Provide project names, locations, completion dates, names and telephone numbers of

General Contractor and Owner's contact person.4. Installer certified by manufacturer.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver materials to job site in sealed, unopened cartons or crates. Protect units from damage. Store material under cover, protected from weather and construction activities.

B. Store products in manufacturer's unopened packaging until ready for installation. Store flat in dry, well ventilated area out of direct sunlight.

C. Condition wood components to average prevailing relative humidity before installation. Do not subject wood components to extreme nor rapid changes in heat or humidity.

1.6 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

A. Warranty: Provide manufacturer's standard warranty against defects in materials and workmanship and as follows:1. Roller: Ten years.2. Seal Failure of Insulated Glazing: Ten years.3. Components (excluding rollers and seal of insulated glazing): One year from date of

delivery by manufacturer.4. Components (excluding rollers and seal of insulated glazing): Two years from date of

delivery by manufacturer.

PART 2 PRODUCTS

2.1 MANUFACTURERS

08400-2

A. Acceptable Manufacturer: NanaWall Systems , which is located at: 100 Meadowcreek Dr. Suite 250; Corte Madera, CA 94925; Toll Free Tel: 800-873-5673; Tel: 415-383-3148; Fax: 415-383-0312; Email:request info ([email protected]); Web:www.nanawall.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 WOOD FRAMED FOLDING GLASS WALL SYSTEMS

A. Wood Framed Glass Wall System Construction - General:1. Construction: Wood panels to include close tolerance mortise and tenon, glued and

pinned corners.2. Frame and Panels: From manufacturer's standard profiles, provide head jamb, side

jambs, and panels with dimensions shown on the Drawings.3. Weatherstripping: Provide manufacturer's standard double layer EPDM or brush seals

with a two layer polyamide fin at both the inner and outer edge of door panels or on frame for sealing between panels and between panel and frame.

4. Sizes and Configurations: Refer to the Drawings for selected custom dimensions within maximum frame sizes possible as indicated in manufacturer's literature. Refer to the Drawings for selected number of panels and configuration.

5. Sliding/Folding Hardware:a. Provide manufacturer's standard combination sliding and folding hardware with

top, bottom tracks and threshold.b. All running carriages to be with sealed, self-lubrication, ball bearing multi-

rollers.6. Mounting Position: For each pair of folding panels, provide cardanic, independently

suspended, four wheeled coated with fiberglass reinforced polyamide upper running carriage and lower guide carriage.

7. Mounting Position: For floor mounted system provide upper guide carriage and lower running carriage with four vertical stainless steel wheels and two horizontal wheels. The vertical wheels to ride on Type 304 stainless steel guide track covers over the full length of sill track. Carrying capacity of lower running carriage to be 440 lbs (200 kg).

8. Lites and Mullions: Panels with one lite configuration.9. Lites and Mullions: Panels with horizontal mullions at specified heights from the

bottom of the panel.10. Lites and Mullions: Panels with simulated divided lites in pattern as shown on the

Drawings.11. Stile and Rail : 3-1/16 in (78 mm).12. Stile and Rail Width: 3-3/4 in (95 mm).13. Stile and Rail Width: 4-3/4 in (120 mm).14. Stile and Rail Width: As selected by Architect from manufacturer's options.15. Stile and Rail Width: As indicated on the Drawings.16. Stile and Rail Width: 2-5/8 in (66 mm).17. Provide standard bottom rail.18. Provide manufacturer's standard kickplate.

a. Height: As selected by Architect from manufacturer's options.b. Height: As indicated on the Drawings.c. Height: ____.

19. Wood: Solid, three layer, cross-grained, kiln dried.20. Wood Species: Douglas fir.21. Wood Species: European pine.22. Wood Species: Meranti.23. Wood Species: Western hemlock.24. Wood Species: Spruce.

08400-3

25. Wood Species: European oak.26. Wood Species: Sapeli mahogany.27. Wood Species; interior applications: Cherry.28. Wood Species, interior applications: Maple.29. Wood Species; interior applications: Beech.30. Wood Species: As indicated on the Drawings.31. Wood Species: As selected by Architect from manufacturer's options.32. Wood Finish: Finish to be water based, opened pored clear sand sealed for stain.33. Wood Finish: Standard primed for paint.34. Wood Finish: As indicated on the Drawings.35. Wood Finish: As selected by Architect from manufacturer's options.36. Wood Finish: Clear sand sealed and one additional clear coat.37. Wood Finish: Pigmented No. 410 with one additional coat.38. Wood Finish: Pigmented No. 510 with one additional coat.39. Wood Finish: Selected from range of RAL finishes from manufacturer with one

additional coat.40. Wood Finish: As indicated on the Drawings.41. Wood Finish: As selected from manufacturer's options.42. Aluminum Extrusions:

a. Extrusions with nominal thickness of .078 in (2.0 mm).b. Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European

standard).c. Anodized conforming to AAMA 611or powder coated conforming to AAMA

2603.02.

B. Model WD65: Wood framed glass wall systems as manufactured by Nanawall Systems, Inc.1. Fabrication: Use solid, three layer, cross grained frame and panel profiles with hinges,

sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.

2. System Operation: Folding panel system.3. System Operation: Paired panel system.4. Panel Operation: Inward opening unit.5. Panel Operation: Outward opening unit.6. Panel Operation: Center pivoted unit.7. Panel Operation: Inward/outward combination opening unit.8. Panel Operation: FoldFlat, against wall, full 180 degrees movement of door panel

stack9. Panel Operation: As indicated on Drawings.10. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from

inside, primary swing panel on the left.11. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from

inside, primary swing panel on the right.12. Hinges: Provide manufacturer's standard clear anodized aluminum hinges. Provide

stainless steel hinge pins.13. Hinges: Provide manufacturer's dark bronze anodized aluminum hinges. Provide

stainless steel hinge pins.14. Hinges: As indicated on the Drawings.15. Hinges: As selected by Architect from manufacturer's full range of standard available

options.16. Adjustment: Provide folding/sliding hardware capable of specified amount of

compensation and adjustments without needing to remove panels from tracks.17. Aluminum Thresholds: Clear anodized standard sill18. Aluminum Thresholds: Dark bronze anodized standard sill.19. Aluminum Thresholds: Clear anodized flush sill.

08400-4

20. Aluminum Thresholds: Dark bronze anodized flush sill.21. Aluminum Thresholds: Clear anodized low profile saddle sill.22. Aluminum Thresholds: Dark bronze anodized low profile saddle sill.23. Aluminum Thresholds: As indicated on the Drawings.24. Aluminum Thresholds: As selected by Architect from manufacturer's options.25. Glass: As selected by Architect from manufacturer's options.

C. Model WD66: Wood framed folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Fabrication: Use solid, three layer, cross grained frame and panel profiles with hinges,

sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.

2. Panel Operation: Inward opening unit.3. Panel Operation: Outward opening unit.4. Panel Operation: As indicated on Drawings.5. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from


inside, primary swing panel on the right.7. Hinges: Provide manufacturer's aluminum hinges and spline on edge of panel. For

structural strength, hinges to be connected to spline and not directly into wood. Provide stainless steel security hinge pins with set screws.a. Finish: Standard clear anodized.b. Finish: Dark bronze anodized.c. Finish: As indicated on the Drawings.d. Finish: As selected by Architect from manufacturer's options.

8. Adjustment: Provide folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks, in width, 1/8 in (3 mm) per hinge and in height, 1/4 in (6 mm) up and down.

9. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear anodized raised sill.

10. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized raised sill.

11. Aluminum Thresholds: Clear anodized flush sill.12. Aluminum Thresholds: Dark bronze anodized flush sill.13. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear

anodized low profile saddle sill.14. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze

anodized low profile saddle sill.15. Aluminum Thresholds: As indicated on the Drawings.16. Aluminum Thresholds: As selected by Architect from manufacturer's options.17. Glass: As selected by Architect from manufacturer's options.

D. Model WA67: Aluminum clad wood folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Fabrication: Use solid, three layer, cross grained frame and panel profiles connected

to exterior aluminum extrusion, hinges and splines, sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.

2. Panel Operation: Inward opening unit.3. Panel Operation: Outward opening unit.4. Panel Operation: As indicated on the Drawings.

08400-5

5. Swing/Stacking Direction: On configurations with a pair of swing panels or with even pair stacking to both sides, looking from inside, primary swing panel on the left.

6. Swing/Stacking Direction: On configurations with a pair of swing panels or with even pair stacking to both sides, looking from inside, primary swing panel on the right.

7. Hinges: Provide manufacturer's aluminum hinges and spline on edge of panel. For structural strength, hinges to be connected to spline and not directly into wood. Provide stainless steel security hinge pins with set screws.a. Finish: Standard clear anodized.b. Finish: Dark bronze anodized.c. Finish: As indicated on the Drawings.d. Finish: As selected by Architect from manufacturer's options.

8. Adjustment: Folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks, in width, 1/8 in (3 mm) per hinge and in height, 1/4 in (6 mm) up and down.

9. Exterior Aluminum Extrusions: Attached to interior wood with manufacturer's thermal isolating polyamide connectors protecting and isolating wood from aluminum using the back ventilated, rain screen principle.

10. Aluminum Finish: Dark bronze anodized.11. Aluminum Finish: Clear anodized.12. Aluminum Finish: Powder coated, white RAL 9016.13. Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.14. Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.15. Aluminum Finish: Custom finish as selected.16. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear

anodized raised sill.17. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze

anodized raised sill.18. Aluminum Thresholds: Clear anodized flush sill.19. Aluminum Thresholds: Dark bronze anodized flush sill.20. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear

anodized low profile saddle sill.21. Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze

anodized low profile saddle sill.22. Aluminum Thresholds: As indicated on the Drawings.23. Aluminum Thresholds: As selected by Architect from manufacturer's options.24. Glass: As selected by Architect from manufacturer's options.

2.3 ALUMINUM-FRAMED FOLDING GLASS WALL SYSTEMS

A. Aluminum Construction:1. Frame and Panels: From manufacturer's standard profiles, provide head jamb, side

jambs, and panels with dimensions shown on the Drawings.2. Weatherstripping: Provide manufacturer's standard double layer EPDM or brush seals

with a two layer polyamide fin at both the inner and outer edge of door panels or on frame for sealing between panels and between panel and frame.

3. Fabrication: Use extruded aluminum frame and panel profiles with corner connectors and hinges, sliding and folding hardware, locking hardware and handles, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.

4. Adjustment: Provide system capable of specified amount of adjustments without removing panels from tracks.

5. Lite and Mullion: Panels with standard one lite configuration.6. Lite and Mullion: Panels with horizontal mullions at specified heights from the bottom

of the panel.7. Lite and Mullion: Provide panels with simulated divided lites in pattern as shown on

08400-6

the Drawings.8. Provide standard bottom rail.9. Provide manufacturer's standard kickplate.

a. Kickplate Height: As selected by Architect from manufacturer's options.b. Kickplate Height: As indicated on the Drawings.c. Kickplate Height (in / mm): ______.

10. Glass: As selected by Architect from manufacturer's options.

B. Model SL45: Monumental aluminum wall systems as manufactured by Nanawall Systems, Inc.1. System Operation: Folding panel system.2. System Operation: Paired panel system.3. Panel Operation: Inward opening unit.4. Panel Operation: Outward opening unit.5. Panel Operation: Center pivoted unit.6. Panel Operation: Inward and outward combination opening unit.7. Panel Operation: Fold flat against wall, full 180 degrees movement of door panel

stack8. Panel Operation: As indicated on the Drawings.9. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from


inside, primary swing panel on the right.11. Aluminum Extrusions: .078 in (2.0 mm) nominal thickness.

a. Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).

12. Aluminum Finish Standard, Anodizing: AAMA 611.13. Aluminum Finish Standard, Powder Coating: AAMA 2603.14. Aluminum Finish Standard, Powder Coating: AAMA 2604.15. Aluminum Finish Standard, Powder Coating: AAMA 2605.16. Aluminum Finish: Dark bronze anodized.17. Aluminum Finish: Clear anodized.18. Aluminum Finish: Powder coated, white RAL 9016.19. Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.20. Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.21. Aluminum Finish: PVDF kynar finish, standard color as selected.22. Aluminum Finish: Wood grain, standard pattern as selected.23. Aluminum Finish: Custom finish as selected.24. Hinges: Manufacturer's standard zinc die cast powder coated hinges that are closest

to match to finish of frame and panels.25. Hinges: Stainless steel security hinge pins with set screws.26. Hinges: Stainless steel hinges.27. Hinges: As indicated on the Drawings.28. Hinges: As selected by Architect from manufacturer's options.29. Screws: Stainless steel, for connecting frame components.30. Aluminum Thresholds: Clear anodized standard sill.31. Aluminum Thresholds: Dark bronze anodized standard sill.32. Aluminum Thresholds: Clear anodized flush sill.33. Aluminum Thresholds: Dark bronze anodized flush sill.34. Aluminum Thresholds: Clear anodized low profile saddle sill.35. Aluminum Thresholds: Dark bronze anodized low profile saddle sill.36. Aluminum Thresholds: As indicated on the Drawings.37. Aluminum Thresholds: As selected by Architect from manufacturer's options.

C. Model SL60: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.

08400-7

1. Single Panel Operation: Inward opening unit.2. Single Panel Operation: Outward opening unit.3. Single Panel Operation: As indicated on the Drawings.4. Single Panel Operation: As indicated on Drawings.5. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from


inside, primary swing panel on the right.7. Aluminum Extrusions: 0.078 in (2.0 mm) nominal thickness.

a. Thermally broken with polyamide plastic reinforced with glass fibers.b. Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European

standard).8. Aluminum Finish Standard, Anodizing: AAMA 611.9. Aluminum Finish Standard, Powder Coating: AAMA 2603.10. Aluminum Finish Standard, Powder Coating: AAMA 2604.11. Aluminum Finish Standard, Powder Coating: AAMA 2605.12. Interior Aluminum Finish: Dark bronze anodized,13. Interior Aluminum Finish: Clear anodized.14. Interior Aluminum Finish: White powder coated, RAL 9016.15. Interior Aluminum Finish: Dark brown powder coated, RAL 8077.16. Interior Aluminum Finish: Silver Gray powder coated, RAL 9006.17. Interior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as

selected.18. Interior Aluminum Finish: Powder coated, RAL matte finish, standard color as

selected.19. Interior Aluminum Finish: Custom finish as selected.20. Exterior Aluminum Finish: To match interior finish specified herein.21. Exterior Aluminum Finish: White powder coated, RAL 9016.22. Exterior Aluminum Finish: Dark brown powder coated, RAL 8077.23. Exterior Aluminum Finish: Silver Gray powder coated, RAL 9006.24. Exterior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as

selected.25. Exterior Aluminum Finish: Powder coated, RAL matte finish, standard color as

selected.26. Exterior Aluminum Finish: Custom finish as selected.27. Sliding and Folding System: Manufacturer's standard combination sliding and folding

hardware with top, bottom tracks and threshold.a. Running carriages: Sealed, self-lubrication, ball bearing multi-rollers.b. Surface mounted hinges and running carriages will not be allowed.c. Weight of panels borne by the bottom of the track will not be allowed.

28. Mounting: For top hung system SL60/o, provide cardanic, independently suspended, four wheeled coated with fiber glass reinforced polyamide upper running carriage and lower guide carriage. Running carriage to be adjustable in height, 1/4 in (6 mm) up and down.

29. Mounting: For floor mounted system SL60/u, provide upper guide carriage and lower running carriage with two vertical stainless steel wheels and two horizontal wheels. The vertical wheels to ride on Type 304 stainless steel guide track covers over the full length of sill track and lie above the water run-off level. Carrying capacity of lower running carriage to be 440 lbs (200 kg).

30. Corner Fittings: On all four corners of panels, thermally broken, die cast zinc multi-functional corner fittings with carriage connectors, hinges and hinge pins as required. Finish: Powder coated, closest match to finish of frame and panels.

31. Fasteners: Tapered pins or machine screws for connecting frame components.32. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide raised sill in finish to match panel finish specified herein.33. Aluminum Thresholds: Provide aluminum clear anodized flush sill.

08400-8

34. Aluminum Thresholds: Provide aluminum dark bronze anodized flush sill.35. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide clear anodized low profile saddle sill.36. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide dark bronze anodized low profile saddle sill.37. Aluminum Thresholds: As indicated on the Drawings.38. Aluminum Thresholds: As selected by Architect from manufacturer's options.

D. Model SL70: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Adjustment: Provide folding/sliding hardware capable of specified amount of

compensation and adjustments without needing to remove panels from tracks, in width, 1/16 in (1.5 mm) per hinge and in height, 1/16 in (2 mm) up and down.

2. Single Panel Operation: Inward opening unit.3. Single Panel Operation: Outward opening unit.4. Single Panel Operation: As indicated on the Drawings.5. Swing/Stacking Direction: On configurations with a pair of swing panels, looking from


inside, primary swing panel on the right.7. Aluminum Extrusions: 0.078 in (2.0 mm) nominal thickness.

a. Thermally broken with a 3/4 to 15/16 in (20 to 24 mm) wide polyamide plastic reinforced with glass fibers.

b. Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).

8. Aluminum Finish Standard, Anodizing: AAMA 611.9. Aluminum Finish Standard, Powder Coating: AAMA 2603.10. Aluminum Finish Standard, Powder Coating: AAMA 2604.11. Aluminum Finish Standard, Powder Coating: AAMA 2605.12. Interior Aluminum Finish: Dark bronze anodized,13. Interior Aluminum Finish: Clear anodized.14. Interior Aluminum Finish: White powder coated, RAL 9016.15. Interior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as

selected.16. Interior Aluminum Finish: Powder coated, RAL matte finish, standard color as

selected.17. Interior Aluminum Finish: PVDF kynar finish, standard color as selected.18. Interior Aluminum Finish: Wood grain, standard pattern as selected.19. Interior Aluminum Finish: Custom finish as selected.20. Exterior Aluminum Finish: Match interior finish specified herein.21. Exterior Aluminum Finish: White powder coated, RAL 9016.22. Exterior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as

selected.23. Exterior Aluminum Finish: Powder coated, RAL matte finish, standard color as

selected.24. Exterior Aluminum Finish: PVDF kynar finish, standard color as selected.25. Exterior Aluminum Finish: Wood grain, standard pattern as selected.26. Exterior Aluminum Finish: Custom finish as selected.27. Sliding/Folding System: Manufacturer's standard combination sliding and folding

hardware with top, bottom tracks and threshold.a. Running carriages to be with sealed, self-lubrication, ball bearing multi-rollers.b. Surface mounted hinges and running carriages will not be allowed.c. Weight of panels borne by the bottom of the track will not be allowed.

28. Mounting: Provide upper guide carriage and lower running carriage with four vertical stainless steel wheels and two horizontal polyamide plastic wheels. The vertical wheels to ride on top of sill track and lie above the water run-off level. Carrying

08400-9

capacity of lower running carriage to be 440 lbs (200 kg).29. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide raised sill in finish to match panel finish specified herein.30. Aluminum Thresholds: Provide aluminum clear anodized flush sill.31. Aluminum Thresholds: Provide aluminum dark bronze anodized flush sill.32. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide clear anodized low profile saddle sill.33. Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm)

polyamide dark bronze anodized low profile saddle sill.34. Aluminum Thresholds: As indicated on the Drawings.35. Aluminum Thresholds: As selected from manufacturer's full range of standard

available options.36. Hinges: Zinc die cast with finish closest match to finish of frame and panels. Provide

stainless steel security hinge pins with set screws.37. Hinges: Stainless steel hinges. Provide stainless steel security hinge pins with set

screws.38. Hinges: As indicated on the Drawings.39. Hinges: As selected by Architect from manufacturer's options.40. Fasteners: Tapered pins or stainless screws for connecting frame components.

E. Folding Door Hardware:1. Keying: For applications with multiple units, all keyed alike.2. Keying: For applications with multiple units, all keyed independently.

a. Handle Finish: Stainless steel handles in a titanium black finish.b. Handle Finish: Stainless steel handles in a brushed satin finish.

3. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel(s), provide manufacturer's standard lever handles on the inside and outside, a Schlage compatible lock set with lockable latch, multi-point locking with a dead bolt and rods at the top and bottom on primary panel only. Rods to be concealed and not edge mounted. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock. On the secondary swing panel, provide dummy handles and concealed flush bolts that operate the rods at the top and the bottom for the secondary swing panel.

4. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's push/pull handles with separate lock set and dead bolt.a. Push-Pull Handles: Brown nylon finish.b. Push-Pull Handles: Gray nylon finishc. Push-Pull Handles: White nylon finish

5. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, no hardware or locking to be provided by the manufacturer, but with field installed panic device by others.

6. Locking Hardware and Handles, Main Entry Panels: On both entry panels for models with a pair of swing panels, no hardware or locking to be provided by the manufacturer, but with field installed panic devices on both panels by others.

7. Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on inswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.

8. Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on outswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and a lock set with a profile cylinder. Operation of lock set is by turn of key from the outside and from the inside with a two point locking hardware operated by 180 degree turn of the handle.

08400-10

9. Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on outswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.

10. Locking Hardware and Handles, Main Entry Panels: On main entry panel, provide manufacturer's standard handle on inside only with concealed two point locking hardware operated by 180 degree turn of handle.

11. Aluminum Locking Rods: Rods to have a stroke of 15/16 in (24 mm).a. End Caps: Fiber glass reinforced polyamide end caps on top and bottom.b. End Caps: Fiberglass reinforced to meet structural loading requirements of

application on top and bottom.12. Locking Hardware and Handles, Secondary Panels: On all other secondary panels,

provide manufacturer's standard handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.

13. Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide manufacturer's removable custodial handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.

14. Handle Height: Centered at 41-3/8 in (1050 mm) from bottom of panel.15. Handle Height (in / mm): Centered at _____ from bottom of panel.

2.4 MONUMENTAL THERMALLY BROKEN ALUMINUM FRAMED FOLDING GLASS WALL SYSTEMS

A. Design Criteria:1. Sizes and Configurations: As indicated by the Drawings for selected number and size

of panels, location of swing panels, and location of tracks and stacking bays.2. Panel Profile: Rounded (SL80).3. Panel Profile: Square (SL81).4. Unit Operation: Inswing type.5. Unit Operation: Outswing type.6. Panel Type: Primary swing panel of paired swing panels as indicated.

a. Entry/Egress panel hinged to side jamb. Location as indicated on drawings.7. Panel Size (W x H): As indicated.8. Panel Pairing Configuration: Number of panels ganged and attached to each jamb as

indicated.9. Panel Configuration: Straight.10. Panel Configuration: Segmented curve.11. Panel Configuration: 90 degree angle turn.12. Panel Configuration: 135 degree angle turn.13. Stack Storage Configuration: Inside jamb.14. Stack Storage Configuration: Outside jamb.15. Vision Glass:

a. Safety Glazing: In compliance with ANSI Z97.1 and CPSC 16CFR 1201.16. Acoustical Glass:

a. Glass Acoustical Performance (ASTM E413 and ASTM E1332): STC.

B. Model SL73: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Floor mounted track supported sliding-folding thermally broken aluminum-framed

glass panel system.2. Frame: 2-5/16 in (58 mm) wide narrow stile frame, bottom-supported system.

Manufacturer's standard or post reinforced frame and panel profiles, with head track, side jambs and panels with dimensions as shown on Drawings.

08400-11

a. Panels with single lite.b. Rail Depth: 2-3/4 in (70 mm).c. Head Width - Inward Opening: 3-15/16 in (101 mm).d. Head Width - Outward Opening: 3-7/8 in (99 mm).e. Head and Jamb Rail Width: 2-1/4 in (57 mm).f. Bottom Rail Width: 3-15/16 in (101 mm) overall with 2-1/4 (57 mm) rail for

raised sill.g. Bottom Rail Width: 2-5/16 in (58 mm) for low-profile saddle sill.h. Bottom Rail Width: Manufacturer's standard kickplate.

1) Kickplate Height (in / mm): ______.3. Performance Criteria (Lab Tested): Low Profile Saddle Sill - Inward Opening.

a. Air Infiltration (ASTM E283) Inward Opening: 0.10 cfm/ft2 (0.51 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).1) Without Weeps: 0.26 cfm/ft2 (1.33 L/s/m2) at 6.24 psf (300 Pa).2) With Weeps: 0.31 cfm/ft2 (1.59 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static (with weeps) test pressure of 5.25 psf (250 Pa).

c. Structural Load Deflection (TAS 202 / ASTM E330):1) Design Pressure: DP-40.2) Design Pressure: DP-45.3) Inward Opening (Standard Unit): Pass.

a) Design Pressure Positive: 70 psf (3350 Pa).b) Design Pressure Negative: 70 psf (3350 Pa).

4) Windload Resistance: Pass; plus or minus 70 psf (3350 Pa).d. Missile Impact & Cycling (TAS 201 and 203; ASTM E1886 and ASTM E1996)

with 7/16 in single glazing or 1-1/8 in IGU Impact Glass:1) Inward Opening (Standard Unit): Pass.


4. Performance Criteria (Lab Tested): Low Profile Saddle Sill - Outward Opening.a. Air Infiltration (ASTM E283) Outward Opening: 0.11 cfm/ft2 (0.56 L/s/m2) at a

static air pressure difference: of 1.57 psf (75 Pa).1) Without Weeps: 0.29 cfm/ft2 (1.49 L/s/m2) at 6.24 psf (300 Pa).2) With Weeps: 0.32 cfm/ft2 (1.64 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static (with weeps) test pressure of 6.00 psf (300 Pa).

c. Structural Loading (ASTM E330):1) Design Pressure: DP-40.2) Design Pressure: DP-45.3) Outward Opening Standard Unit: Pass.4) Design Pressure Positive: 70 psf (3350 Pa).

a) Design Pressure Negative: 70 psf (3350 Pa).5) Windload Resistance: Pass; +/- 70 psf (+/- 3350 Pa).

d. Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with 7/16 in single glazing or 1-1/8 in IGU Impact Glass:1) Outward Opening (Standard Unit): Pass:


5. Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Inward Opening:a. Air Infiltration (ASTM E283): 0.08 to 0.30 cfm/ft2 (0.41 to 1.54 L/s/m2) at a

static air pressure difference of 1.57 psf (75 Pa).1) 0.20 to 0.30 cfm/ft2 (1.02 to 1.54 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure of 12 psf (715 Pa).

c. Dynamic Water Penetration (AAMA 520 / ASTM E2268): Performance Level 2

08400-12

at 6-18 psf (300-860 Pa).d. Structural Load Deflection (TAS 202 / ASTM E330):

1) Design Pressure: DP-40.2) Design Pressure: DP-45.3) Inward Opening (Standard Unit): Pass.


4) Windload Resistance: Pass; +/- 100 psf (+/- 4785 Pa).e. Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with

7/16 in single glazing or 1-1/8 in IGU Impact Glass:1) Inward Opening (Standard Unit): Pass:


6. Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Outward Opening:a. Air Infiltration (ASTM E283): 0.02 to 0.14 cfm/ft2 (0.10 to 0.72 L/s/m2) at a

static air pressure difference: of 1.57 psf (75 Pa).1) 0.07 to 0.30 cfm/ft2 (0.36 to 1.54 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure of 12 psf (715 Pa).

c. Dynamic Water Penetration (AAMA 520 / ASTM E2268): Performance Level 1 at 5-15 psf (250-715 Pa).

d. Structural Load Deflection (TAS 202 / ASTM E330):1) Design Pressure: DP-40.2) Design Pressure: DP-45.3) Outward Opening (Standard Unit): Pass.


4) Windload Resistance: Pass; plus or minus 70 psf (3350 Pa).e. Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with

7/16 in (11 mm) single glazing or 1-1/8 in (29 mm) IGU Impact Glass:1) Outward Opening (Standard Unit): Pass.


7. Folding Glass Storefront Units tested to AAMA/WDMA/CSA 101/I.S.2/A440.8. Forced Entry (TAS 202, AAMA 1304, ASTM F842): Meets requirements for F1.9. Hurricane and Impact Rated (AAMA 506; AAMA/WDMA/CSA/I.S2/A440; ASTM

E1886/ ASTM E1996): Missile Level D and Wind Zone 4 rated.10. Thermal Performance (U-factor): NFRC 100 rated.11. Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT): NFRC 200

rated.12. Air Leakage: NFRC 400 rated.13. Condensation Resistance Factor (CRF): NFRC 500 rated.14. EPA Energy Star: Meets requirements.

C. Model SL80 and SL81: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Provide floor mounted track supported sliding-folding thermally broken aluminum-

framed glass panel system.2. Frame: Thermally Broken Aluminum Framed Folding Glass Storefront 4-1/8 in (105

mm) wide medium stile frame, floor track supported system. Manufacturer's standard thermally broken frame and panel profiles, with head track, side jambs and panels with dimensions as shown on Drawings.a. Panels with single lite with simulated divided lites in pattern as shown on

Drawings.b. Rail Depth: 3-1/8 in (80 mm).

08400-13

c. Head Rail Width: 3-13/16 in (97 mm).d. Jamb Rail Width: 1-7/8 in (48 mm).e. Mullion Depth: 2-7/8 in (73 mm).f. Mullion Width: 2-13/16 in (71 mm).g. Bottom Rail Width: 2-9/16 In (66 mm) for flush sill or low profile saddle sill.h. Bottom Rail Width: 3-13/16 in (97 mm) for raised sill.i. Bottom Rail Width: Manufacturer's standard kickplate.

1) Kickplate Height (in / mm): ______.3. Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Inward

Opening:a. Air Infiltration (EN 1026): Class 4.

1) 0.03 cfm/ft2 (0.48 m3/h m2) at a static air pressure difference of 2.1 psf (100 Pa).

2) 0.06 cfm/ft2 (1.00 m3/h m2) at 6.24 psf (300 Pa).b. Water Penetration (EN 1027): Class 9A: No uncontrolled water leakage at a

static test pressure of 12 psf (600 Pa).c. Structural Load Deflection with Standard Locking Rods (EN 12211):

1) Deflection: Class C3; < 1/300 at +/- 25 psf (+/- 1200 Pa).2) Breakage: None at +/- 36 psf (+/- 1800 Pa).

4. Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Outward Opening:a. Air Infiltration (EN 1026): Class 4.


2) 0.08 cfm/ft2 (1.40 m3/h m2) at 6.24 psf (300 Pa).b. Water Penetration (EN 1027): Class 9A. No uncontrolled water leakage at a

static test pressure of 12 psf (600 Pa).c. Structural Load Deflection with Standard Locking Rods (EN 12211):

1) Deflection: Class B4; < 1/200 at +/- 25 psf (+/- 1200 Pa).2) Breakage: None at +/- 36 psf (+/- 1800 Pa).

5. Performance Criteria (Lab Tested): Intermediate Sill - Inward Opening:1) Air Infiltration (ASTM E283): Less than or equal to 0.03 cfm/ft2 (0.15

L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).2) Less than or equal to 0.09 cfm/ft2 (0.46 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at 7.5 psf (360 Pa).

c. Structural Loading (ASTM E330):1) Design Pressure - Positive: 45 psf (2160 Pa).2) Design Pressure - Negative: 50 psf (2400 Pa).

6. Performance Criteria (Lab Tested): Intermediate Sill - Outward Opening:a. Air Infiltration (ASTM E283): Less than or equal to 0.08 cfm/ft2 (0.41 L/s/m2) at

a static air pressure difference: of 1.57 psf (75 Pa):1) Less than or equal to 0.10 cfm/ft2 (0.51 L/s/m2) at 6.24 psf (300 Pa).

b. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at 8.35 psf (400 Pa).

c. Structural Loading (ASTM E330):1) Design Pressure - Positive: 55 psf (2620 Pa).2) Design Pressure - Negative: 45 psf (2160 Pa).

7. Performance Criteria (Lab Tested): Flush Sill - Inward and Outward Opening Units:a. Air Infiltration (EN 1026): Class 4.


2) 0.14 cfm/ft2 (2.63 m3/h m2) at 6.24 psf (300 Pa).b. Structural Load Deflection with Standard Locking Rods (EN 12211): Class C3.

1) Deflection: < 1/200 at +/- 25 psf (+/- 1200 Pa).2) Breakage: None at +/- 36 psf (+/- 1800 Pa).

08400-14

8. Performance Criteria (Lab Tested): Low Profile Saddle Sill - Inward and Outward Opening Units:a. Air Infiltration (EN 1026): Class 4:


2) 0.14 cfm/ft2 (2.63 m3/h m2) at 6.24 psf (300 Pa).b. Structural Load Deflection with Standard Locking Rods (EN 12211): Class C3.

1) Deflection: < 1/200 at +/- 25 psf (+/- 1200 Pa).2) Breakage: None at +/- 36 psf (+/- 1800 Pa).

9. System - Cycle Testing Performance (EN 1191): Class 3; 10,000 cycles.10. Unit Burglary Resistance: EN 1627-30, Class RC2/ RC2N (Resistance Class 2)

certified.11. Lockset Burglary Resistance: PAS 24 certified.12. Thermal Performance (U-factor): NFRC 100 rated.13. Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT): NFRC 200

rated.14. Air Leakage: NFRC 400 rated.15. Condensation Resistance Factor (CRF): NFRC 500 rated.16. EPA Energy Star: Meets requirements.

D. Model SL82: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.1. Floor mounted track supported sliding-folding thermally broken aluminum-framed

glass panel system.2. Frame: Thermally Broken Aluminum Framed Folding Glass Storefront Description: 3-

1/8 in (80 mm) thick interior frame with a structurally glazed frameless exterior, floor track supported roller system with head guide rails, and designed for inswing opening straight glass walls. Manufacturer's standard thermally broken frame and panel profiles, with floor and head tracks, side jambs and panels with dimensions as shown on Drawings.a. Panels with single lite with simulated divided lites in pattern as shown on

Drawings.b. Rail Depth: 3-1/8 in (80 mm).c. Head Rail Width: 4-1/2 in (115 mm).d. Jamb Rail Width: 1-7/8 in (48 mm).e. Mullion Depth: 2-7/8 in (73 mm).f. Mullion Width: 2-13/16 in (71 mm).g. Bottom Rail Width: 2-9/16 In (66 mm) for flush sill or low profile saddle sillh. Bottom Rail Width: 3-13/16 in (97 mm) for raised sill.i. Bottom Rail Width: 2-3/4 in (70 mm) for flush sill or saddle sill.j. Bottom Rail Width: Manufacturer's standard.

1) Kickplate Height (in / mm): ______.3. Performance Criteria (Lab Tested): Weather Performance Raised Sill - Inward

Opening:a. Air Infiltration (ASTM E283 and NFRC 400):

1) Standard Unit: Plus A3.a) Static Air Pressure Difference of 1.57 psf (75 Pa): 0.02 cfm/ft2

(0.10 L/s/m2)b) Static Air Pressure Difference of 6.24 psf (300 Pa): 0.09 cfm/ft2

(0.46 L/s/m2) .2) Unit with Additional Weepholes: Plus A3:

a) Static Air Pressure Difference of 1.57 psf (75 Pa): 0.13 cfm/ft2 (0.67 L/s/m2).

b) Static Air Pressure Difference of 6.24 psf (300 Pa): 0.27 cfm/ft2 (1.38 L/s/m2).

b. Water Penetration (ASTM E547 and ASTM E331):

08400-15

1) Standard Unit: Plus B2.a) Static Test Pressure of 6 psf (300 Pa): No uncontrolled water

leakage.2) Unit with Additional Weepholes: Plus B4.

a) Static Test Pressure of 12 psf (580 Pa): No uncontrolled water leakage at a

c. Structural Load Deflection with Standard Locking Rods (ASTM E330): Pass.1) Design Pressure - Positive: 30 psf (1440 Pa).2) Design Pressure - Negative: 40 psf (1920 Pa).3) Windload Resistance: C1 rating (plus or minus 720 Pa).4) Blow-out: C3 rating (2160 Pa, minus 2880 Pa).

d. Forced Entry (ASTM F842, AMMA 1304, CAWM 300): Meets Grade 40; Plus F2.

4. Performance Criteria (Lab Tested): Weather Performance Raised Sill & Flush Sill - Inward Opening:a. Air Infiltration (EN 1026/12207) for Raised Sill Only: Category 3.

1) At 12 psf (600 Pa): 0.79 cfm/ft2 (6.75 L/s/m2).b. Water Penetration (EN 1027/12208) for Raised Sill Only: Category 7A.

1) At a static test pressure of 6 psf (300 Pa): No uncontrolled water leakage.

c. Structural Load Deflection with Standard Locking Rods (EN 12211):1) Deflection: Less than 1/150 at plus or minus 24 psf (1200 Pa).2) Deflection: Less than 1/150 at plus or minus 36 psf (1800 Pa).

d. System - Life Cycle Performance (DIN EN 1191/12400): 10,000 cycles.e. EPA Energy Star: Meets requirements.

E. Material:1. Aluminum Extrusion: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).

a. Thickness: 0.078 in (2.0 mm) nominal.2. Thermal Break: 3/4 to 15/16 in (20 to 24 mm) wide polyamide plastic reinforced with

glass fibers. Thinner or poured and de-bridged type thermal breaks not acceptable.

F. Finish: Color as indicated or scheduled on drawings:1. Provide single finish and color on inside and outside surfaces.2. Provide two-tone finish and color for inside and outside surfaces.3. Finish System: Anodized (AAMA 611).4. Finish System: Powder Coat (AAMA 2604).5. Finish System: PVDF Coat (AAMA 2605).

G. Locking Hardware and Handles:1. Main Entry Panels for Models with Swing Panels:

a. Manufacturer's standard lever handles on the inside and outside.b. Standard lockset with a lockable latch.c. Multi-point locking with a dead bolt and rods at the top and bottom on primary

panel.d. Secondary panel hardware, hardware finish and keyed cylinder requirements

as indicated or scheduled on drawings.2. Main Entry Panel for Models with a Swing Panel:

a. Manufacturer's push/pull handles.b. Separate lockset and dead bolt.c. One point locking at the top and bottom consisting of locking rods operated by

a 180 degree turn of flat handle on the inside.d. Push-pull handles in a brushed stainless steel finish and stainless steel flat

handles in finish scheduled on Drawings.3. Main Entry Pair of Panels on Models without a Swing Panel:

a. Manufacturer's standard L-shaped handles on the inside and outside

08400-16

b. Lockset with profile cylinder. Operation of lockset is by turn of key from outside and thumb turn inside.

c. Two-point locking hardware operated by 180 degree turn of the handle.d. L-shaped handles. Finish as scheduled on Drawings.

4. Main Entry Panel:a. Manufacturer's standard U/L-shaped handle on inside onlyb. Concealed two point locking hardware operated by 180 degree turn of handle.

5. Main Entry Panel for Models with a Swing Panel:a. No hardware or locking provided by manufacturer.b. Field installed panic device by Section 08710.

6. Secondary Panels and Pairs of Folding Panels:a. Manufacturer's standard handles or removable custodial handles as scheduled.b. Concealed two-point locking hardware operated by 180 degree turn of handle

between each pair.c. Face applied flush bolt locking not acceptable.

H. Folding Panel Hardware:1. Sliding-Folding Hardware: Manufacturer's standard combination sliding and folding

hardware with top and bottom tracks and threshold. Running carriages to have sealed, self-lubricated, ball bearing multi-rollers. Surface mounted hinges and running carriages not acceptable.

2. Weatherstripping:a. Manufacturer's double layer EPDM between panels.b. EPDM gasket and Q-lon gasket.c. Brush seal between panel and framed. Brush seals with a two-layer fiberglass reinforced polyamide fin for sealing

between panels and between panel and frame1) Attached at both inner and outer edge of bottom of door panels on

recessed sill2) Attached on frame.

2.5 SINGLE TRACK SLIDING GLASS WALL SYSTEMS

A. Design Criteria:1. Standard top-hung, single-track, interlocking framed sliding glass storefront system

that can be pocketed when open and have a swing door. Manufacturer's standard frame and panel profiles, with head track, stacking bays, side jambs, sliding panels, and swing panels with dimensions as shown on Drawings.

2. Sizes and Configurations: As indicated by Drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.

3. Unit Operation: Adjustable sliding and swing hardware with top and bottom track.4. Panel Type: Multiple unattached with Entry/Egress panel hinged to side jamb.5. Panel Type: Multiple unattached with Entry/Egress panel convertible to sliding panel.6. Panel Size (W x H): As indicated.7. Panels: Single lite.8. Panels: Multiple lites with horizontal mullions at heights indicated from the bottom of

the panel.9. Panels: Single lite with simulated divided lites in pattern indicated.10. Panel Configuration: Straight.11. Panel Configuration: Segmented curve.12. Panel Configuration: 90 degree angle turn.13. Panel Configuration: 135 degree angle turn.14. Panel Configuration: Window/door combination.15. Stack Storage Configuration: Remote pocket.16. Stack Storage Configuration: Jamb wall.17. Stack Storage Configuration: Behind swing door.

08400-17

18. Stack Storage Configuration: Straight wall.19. Stack Storage Configuration: Jamb wall pocket(s).20. Vision Glass: Safety Glazing per ANSI Z97.1 and CPSC 16CFR 1201.21. Acoustical Glass: Per (ASTM E413 and ASTM E1332): STC.

B. Performance:1. Performance Criteria (Lab Tested): Low Profile Saddle Sill.

a. Air Infiltration (ASTM E283): 0.3 cfm/ft2 (1.5 L/s/m2) at a static air pressure difference of 1.56 psf (75 Pa).

b. Air Infiltration (ASTM E283): 0.12 cfm/ft2 (0.60 L/s/m2) at a static air pressure difference of 1.57 psf (75 Pa).

c. Air Infiltration (ASTM E283): 0.30 cfm/ft2 (1.5 L/s/m2) at a static air pressure difference of 6.27 psf (300 Pa).

d. Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure in:1) Units with Weepholes from Middle Channel: 2.92 psf (140 Pa).2) Units with Weepholes from Inner Channel: 6.0 psf (290 Pa).3) Units with Weepholes from Inner Channel: 5.0 psf (240 Pa).

e. Structural Loading (ASTM E330): Pass.1) Load Structure: At 1.5 times design wind pressure with no glass

breakage or permanent damage to fasteners or storefront components:a) Design Pressure Positive: 45 psf (2160 Pa).b) Design Pressure Negative: 45 psf (2160 Pa).c) Design Pressure Positive: 41 psf (2000 Pa).d) Design Pressure Negative: 41 psf (2000 Pa).

f. Forced Entry (ASTM F842): Meets Type A - Grade 40.g. Forced Entry (AAMA 1304): Meets 300 lb. (1330 N) point load requirement.h. Florida Product Approval - Wind Loading per FL 17751.1: Units with panel sizes

up to 43 in (1092 mm) wide x 10 ft (3.048 m) high subject to manufacturer size chart.

i. Swing Panel - Operation and Cycling Performance (AAMA 920): 500,000 cycles.

j. Sliding Glass Storefront Units tested to AAMA/WDMA/CSA 101/I.S.2/A440.k. Project Wind Loads (ASCE 7): System designed to withstand 20.0 psf (958 Pa)

core required positive and negative pressure as minimum loads normal to the plane of the wall as required by authorities having jurisdiction.

l. Thermal Performance (U-factor): NFRC 100 rated.m. Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT):

NFRC 200 rated.n. Air Leakage: NFRC 400 rated.o. Condensation Resistance Factor (CRF): NFRC 500 rated.p. EPA Energy Star: Meets requirements

C. Wood Construction:1. Product: Model HSW66 as manufactured by Nanawall Systems, Inc.2. Wood panels to include close tolerance mortise and tenon, glued and pinned corners.3. Head Jamb, Tracks, Stacking Bays, and Sill: From manufacturer's standard profiles.

Provide head tracks, stacking bays, and sill with dimensions shown on the Drawings.a. Floor Sill Finish: Clear anodized flush sill.b. Floor Sills Finish: Dark bronze anodized flush sill.c. Floor Sills Finish: Clear anodized low profile saddle sill.d. Floor Sills Finish: Dark bronze anodized low profile saddle sill.e. Floor Sills Finish: Surface mounted interior sill.f. Floor Sills Finish: No sill, units with adjustable floor sockets.g. Floor Sills Finish: As indicated on the Drawings.h. Floor Sills Finish: As selected from manufacturer's options.

08400-18

4. Weatherstripping: Manufacturer's standard double layer APTK at both the inner and outer edge of door panels or on frame for vertical sealing between panels and between panels and frame. Provide brush seals with flexible plastic web for all horizontal sealing.

5. Sizes and Configurations: Refer to the Drawings for selected custom dimensions within the maximum frame sizes possible as indicated in manufacturer's literature. Refer to the Drawings for selected number of panels, location of swing panels, and location of tracks and stacking bays.

6. Aluminum Extrusions: Alloy specified as AlMgSi 0.5 with strength rated as 6063-T5 or F-22 (European standard).a. Nominal Thickness: 0.078 in (2.0 mm).b. Finish: Anodized conforming to AAMA 611 Clear.

7. Panels and Side Jambs: From manufacturer's standard profiles, provide panels and side jambs with dimensions shown on the Drawings or as needed for panel stability.

8. Lites and Mullions: Panels with standard one lite configuration.9. Lites and Mullions: Panels with horizontal mullions at specified heights from the

bottom of the panel.10. Lites and Mullions: Panels with simulated divided lites in pattern as shown on the

Drawings.11. Head Rail (W x D): 2-3/4 x 3-3/4 in (70 x 95 mm).12. Jamb Rail (W x D): 1-3/4 x 1-3/4 in (45 x 45 mm).13. Bottom Rail: Manufacturer's standard bottom rail. (2-3/4 x 3-3/4 in (70 x 95 mm).14. Bottom Rail: High profile.

a. Height: As selected by Architect from manufacturer's options.b. Height: As indicated on the Drawings.c. Height: ____.

15. Wood: Solid, three layer, cross-grained, kiln dried with matching solid wood glazing stops.

16. Wood Species: Douglas fir.17. Wood Species: European pine.18. Wood Species: Meranti.19. Wood Species: Western hemlock.20. Wood Species: Spruce.21. Wood Species: European oak.22. Wood Species: Sapeli mahogany.23. Wood Species: As indicated on the Drawings.24. Wood Species: As selected by Architect from manufacturer's options.25. Wood Species: Cherry.26. Wood Species: Maple.27. Wood Species: Beech.28. Before installation, all wood must have a field applied finish with at least two coats.

a. Wood Sealing Finish: Water based, opened pored clear sand sealed for stain.b. Wood Sealing Finish: Standard primer for paint.c. Wood Sealing Finish: As indicated on the Drawings.d. Wood Sealing Finish: As selected from manufacturer's options.

29. Sliding and Swinging Hardware:a. Manufacturer's standard hardware.b. For each sliding panel, provide 2 three wheeled, sintered bronze (oil

impregnated) unidirectional sliding panel carriers with a one-wheeled, polyamide guide roller that is attached to the panels with stainless steel rods.

c. Carrying capacity of each carrier to be 330 lbs (150 kg).30. Hinges: Provide manufacturer's standard clear anodized aluminum hinges. Provide

stainless steel hinge pins.31. Hinges: Provide manufacturer's dark bronze anodized aluminum hinges. Provide

stainless steel hinge pins.32. Hinges: As indicated on the Drawings.

08400-19

33. Hinges: As selected by Architect from manufacturer's full range of standard available options.

34. Provide machine screws for connecting frame components.

D. Aluminum Construction:1. Product: Model HSW60 as manufactured by Nanawall Systems, Inc.2. Weather Stripping: Manufacturer's standard double layer APTK at both the inner and

outer edge of door panels or on frame for vertical sealing between panels and between panels and frame. Brush seals with flexible plastic web for all horizontal sealing.

3. Fabrication:a. Use extruded aluminum frame and panel profiles, corner connectors and

hinges, sliding and swinging hardware, locking hardware and handles, glass and glazing and weather stripping as specified herein to make a single track sliding glass wall.

b. Factory pre-assembled and ship with all components and installation instructions.

4. Sizes and Configurations: Refer to the Drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.

5. Lites and Mullions: Panels with standard one lite configuration.6. Lites and Mullions: Panels with horizontal mullions at specified heights from the

bottom of the panel.7. Provide panels with simulated divided lites in pattern as shown on the Drawings.8. Head Rail (W x D): 4-5/16 x 2-5/16 in (110 x 59 mm).9. Jamb Rail (W x D): 5-1/4 x 2-5/16 in (134 x 59 mm).10. Kickplate: Manufacturer's standard kickplate 2-3/8 in (60 mm) high.11. Kickplate: As selected by Architect from manufacturer's options.12. Kickplate: As indicated on the Drawings.13. Aluminum Extrusion: Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or

F-22 (European standard).a. Nominal Thickness: 0.078 in (2.0 mm).

14. Finish: Powder coated conforming to AAMA 2604. Color as scheduled or indicated.15. Finish: Anodized conforming to AAMA 611 - Clear.16. Adjustment: Provide system capable of specified amount of adjustments without

removing panels from tracks.17. Aluminum Threshold: Clear anodized standard flush sill.18. Aluminum Threshold: Dark bronze anodized standard flush sill.19. Aluminum Threshold: Clear anodized low profile saddle sill.20. Aluminum Threshold: Dark bronze anodized low profile saddle sill.21. Aluminum Threshold: No sill, units with adjustable floor sockets.22. Aluminum Threshold: As indicated on the Drawings.23. Aluminum Threshold: As selected from manufacturer's full range of sill options.

E. Sliding Door Hardware:1. Keying: For applications with multiple units, all keyed alike.2. Keying: For applications with multiple units, all keyed independently.3. Handles: Stainless steel levers, L shaped and flat handles in a titanium black finish.4. Handles: Stainless steel levers, L shaped and flat handles in a brushed satin finish.5. Handles: Oil rubbed bronze, L shaped and flat handles in solid brass6. Handles: Satin nickel, L shaped and flat handles in solid brass7. Handles: White, L shaped and flat handles in solid brass8. Handles: As indicated on the Drawings.9. Handles: As selected by Architect from manufacturer's full range of standard available

options.10. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for

models with a swing panel, provide manufacturer's standard lever handles on the

08400-20

inside and outside, a Schlage compatible lock set with lockable latch, multi-point locking with a dead bolt and rods at the top and bottom on primary panel. Rods to be concealed and not edge mounted. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.

11. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's standard lever handles on the inside and outside and a lock set with a one point lockable latch. Depression of handles withdraws latch. Turn of key or thumb turn engages deadbolt and operates lock. For heights above 7 ft (2137 mm) provide separate, additional deadbolts as necessary.

12. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's standard L-shaped handles on the inside and outside, and a lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a three point locking hardware operated by 180 degree turn of the handle.

13. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's push/pull handles with separate lock set and dead bolt.

14. Push-Pull Handle Finish: Brown nylon.15. Push-Pull Handle Finish: Gray nylon.16. Push-Pull Handle Finish: White nylon.17. Locking Hardware and Handles, Main Entry Panels: On the main entry panel for

models with a swing panel, no hardware or locking to be provided by the manufacturer, but with field installed panic device by others.

18. Locking Hardware and Handles, Main Entry Panels: On the sliding panel to be opened first for models without a swing panel, provide manufacturer's standard L-shaped handle on the inside, flat handle on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.

19. Locking Hardware and Handles, Main Entry Panels: On the sliding panel to be opened first for models without a swing panel, provide manufacturer's standard flat handle on the inside and on the outside and a lock set with a profile cylinder. Operation of lock set is by turn of key from the outside and from the inside with a two point locking hardware operated by 180 degree turn of the handle.

20. Locking Hardware and Handles, Main Entry Panels: on main entry panel, provide manufacturer's standard flat handle on inside only with concealed two point locking hardware operated by 180 degree turn of handle.

21. Aluminum Locking Rods: Rods to have a stroke of 15/16 in (24 mm).a. End Caps: Fiberglass end caps reinforced to meet structural loading

requirements of application on top and bottom.b. End Caps: Standard fiber glass reinforced polyamide end caps on top and

bottom.22. Locking Hardware and Handles, Secondary Panels: On all other secondary panels,

provide manufacturer's standard flat handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.

23. Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide removable custodial handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.

24. For any incorporated swing panel in a sliding L frame panel, provide pull handle to convert swing panel to sliding L frame panel and vice versa.a. Incorporated Swing Panel Pull Handles: Clear anodized only.

25. Handle Height, Centered: 41-3/8 in (1050 mm) from bottom of panel.26. Handle Height, Centered: _____ from bottom of panel.

08400-21

F. Full Wall to Ceiling Glass Construction:1. Product: Provide cero as manufactured by Nanawall Systems, Inc. Sliding and fixed,

large-area glass panels in an extruded aluminum frame.2. Performance Criteria:

a. Air Permeability (EN 12207 / EN 12211): Class 4.b. Barrier-Free Accessibility (DIN 18040): Pass.c. Driving Rain and Water Impermeability (EN 12208 / EN 1027): 12 psf (600 Pa)d. Durability (DIN EN 1191): 2.e. System - Life Cycle Performance (DIN EN 1191/12400):

1) cero III Triple-Glazed: 40,000 cyclesf. Wind Load Resistance, Unreinforced (EN 12210 / EN 1627):

1) cero II Double-Glazed: Class B42) cero III Triple-Glazed: Class B3

g. Burglary Protection (EN 1628, 1629, 1630 / EN 1627):1) cero II Double-Glazed: Class RC2 (WK2)2) cero III Triple-Glazed: Class RC2 (WK2) and Class RC3 (WK3)

h. Thermal Performance (U-factor): NFRC 100i. Solar Heat Gain Coefficient (SHGC) and Visible Light Transmission (VT):

NFRC 200j. Air Leakage: NFRC 400 pendingk. Condensation Resistance Factor (CRF): NFRC 500 pendingl. EPA Energy Star: Meet requirements.

3. Sustainability Characteristics:a. LEED 2009 (v3)

1) MRc1.1: NanaWall exterior glass wall systems, not demolished in a renovation project, are reused in the same location.

2) MRc1.2: NanaWall interior glass wall systems, not demolished in a renovation project, are reused in the same location.

3) MRc2:NanaWall cardboard shipping crates are made of 60 percent recycled material and are 100 percent recyclable.

4) MRc3:NanaWall's components easily disassemble and reassemble to "Use as salvaged... or reused materials."

5) IEQc2:NanaWall systems provide natural ventilation in the open position, assisting in the 90 percent required natural ventilation of occupied spaces of ASHRAE 62.1.

6) EQc8.1: NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.

7) EQc8.2: NanaWall glass wall assemblies provide direct outdoor lines of sight.

b. LEED v4 for Interior Design and Construction (ID&C)1) MRc1:NanaWall can be easily disassembled for salvage and reuse.2) EQc7:NanaWall glass wall assembly borrowed light brings daylight

deeper into the floor plate.3) EQc8:NanaWall glass wall assemblies provide direct outdoor lines of

sight.4. Design Criteria:

a. Sizes and Configurations: As indicated by the drawingsb. Unit Operation: Sliding hardware with recessed head, floor tracks and side

jamb;1) Fixed.2) Fixed and manual operation.3) Manual operation.4) Fix and motorized electric drive operation.5) Motorized electric drive operation.

c. Panel Configuration:1) Straight

08400-22

2) 90 degree angle corner3) Fixed all-glass 90 degree angle corner

d. Stack Storage Configuration: Side stack in track as indicated.e. Mounting Type: Floor track supported.f. Sill Type: Thermally brokeng. Sill Type: Non-thermally broken

5. Sliding Glass Wall system: Sliding panels stainless steel carrier rollers with double-row deep groove ball-bearings and rolls on single or tandem stainless steel rail runner inserts in thermally broken or non-thermally broken flush sill floor track. Flat 2-point locking handle, gasket seals and brushes, a hidden integrated drainage offset duct system, and glazing rebate ventilation for controlled back-ventilation of the panel edge. Frame is thermally isolated with glass-fiber reinforced polyamide cross-pieces and has a minimal 1-5/16 in (34 mm) exposure that matches vertical stiles.a. Linear panel system load transfer to structure at floor.b. Panel Size (in / mm): ______.c. Maximum Panel Weight: 1,300 lb. (600 kg) cero II double glazed.d. Maximum Panel Weight: 2,200 lb. (1 000 kg) cero III triple glazed.e. Top & Bottom Rail Depth: 2-1/16 in (52 mm) cero II double glazed.f. Top & Bottom Rail Depth: 2-13/16 in (72 mm) cero III triple glazed.g. Top & Bottom Rail and Vertical Stile Exposed Face Width: 1-5/16 in (34 mm)h. Adjustable Floor Track:

1) System to be capable of 1/8 in (3 mm) plus height adjustments without removing panels from tracks.

2) Systems without adjustment capability not acceptable.3) Factory fabricated hidden integrated drainage offset duct system.

a) Drainage down.b) Drainage out to the exterior face.

4) Purenit extension profile with adjustable base, 1-3/4 in (45 mm).5) Aluminum ADA higher weather performance sill inserts.

i. Fully Recessed Surround Frame Depth: 1-runner 2-15/16 in (75 mm) cero II double glazed.

j. Fully Recessed Surround Frame Depth: 1-runner 3-1/8 in (79 mm) cero III triple glazed.

k. Semi-recessed Surround Frame Depth: 1-runner 2-15/16 in (75 mm) cero II double glazed

l. Semi-recessed Surround Frame Depth: 1-runner 3-1/8 in (79 mm) cero III triple glazed

m. Surrounding Frame Exposure (in / mm): _____.n. Aluminum Extrusions (EN AW-6060 T66 - F-22): AIMgSi0.5 alloy, 6063-T5

1) Thickness: 0.059 to 0.157 in (1.5 mm to 4 mm)2) Thermal Break: Glass fiber reinforced polyamide cross pieces aligned in

the same plane through the frame and panels. Offset thermal breaks not acceptable.a) Thickness for cero II: 5/8 in (16 mm) at frame; 15/16 in (24 mm) at

panel.b) Thickness for cero III: 1-3/8 in (34 mm) at frame; 1-1/32 in (26

mm) at panel.o. Exposed Aluminum Frame and Track Finish:

1) Finish; Anodized (AAMA 611): Clear.2) Finish; Anodized (AAMA 611): Dark bronze.3) Finish; Anodized (AAMA 611): Metallic as chosen from manufacturer's

eloxal tone DB finish chart.4) Finish; Powder Coat (AAMA 2604):

a) Color: As chosen from manufacturer's powder coating finish chart:b) Color: As chosen from manufacturer's standard selection of 50

colors - matte.

08400-23

c) Color: As chosen from manufacturer's full RAL selection; high gloss.

d) Color: As chosen from manufacturer's full RAL selection; matte.5) Finish: ______.

6. Glass and Glazing:a. Safety Glazing: In compliance with ASTM C1036 or ASTM C1048, and ANSI

Z97.1 and CPSC 16CFR 1201.1) Glass Acoustical Performance (DIN 52210-3,4): Rw (STC) 43 for cero II2) Glass Acoustical Performance (DIN 52210-3,4): Rw (STC) 44 for cero III

b. Glazing Units: Double insulated dry glazed with glass stops on the inside.c. Glazing Units: Triple insulated glazing units: Dry glazed with glass stops on the

inside.a) Glass Lites: Standard reduced ironb) Glass Lites: Tempered.c) Glass Lites: Laminated.

2) Glass Lite Thicknesses in IGU: 1/4 in (6 mm)3) Glass Lite Thicknesses in IGU: 5/16 in (8 mm)4) Glass Lite Thicknesses in IGU: 3/8 in (10 mm)

d. Glazing Lite Thickness in IGU: ______.e. Glazing rebate ventilation for controlled back ventilation of the panel edge.

1) Glass Lite Type: Reduced iron.2) Glass Lite Type: Low iron.3) Glass Lite Type: Solar bronze.4) Glass Lite Type: Solar gray.5) Glass Lite Type: Ornilux bird safe.

f. Alarmed Glazing: Connection wiring to alarm system, position monitoring, locking detection and notification systems such as glass-breakage sensors by others.

7. Sliding Hardware:a. Carriers: Stainless steel carriers on encapsulated self-lubricating dual ball

bearing rollers with 'gothic arch design' concealed in the sliding panel aluminum frame profile1) Carriers Attached to Each Sliding Panel: 22) Carriers Attached to Each Sliding Panel: 43) Rail Runners: Single stainless steel rail runners inserted into the floor

track for cero II4) Rail Runners: Tandem stainless steel rail runners inserted into the floor

track for cero III5) Floor Track: Thermally broken sill floor track.6) Floor Track: Non-thermally broken flush sill floor track.7) Replaceable Brushes: Integrated on both ends and in front of panel lower

rail to ensure clean, smooth wheel/roller operation.8) Electrical Drive Assembly: By others.

b. Locking Systems: Concealed two-point locking mechanism as standard, with 1 in (25 mm) throw in top and bottom adjustable receivers.1) Flat 2-Point Locking Handle - Minimalistic: Brushed satin stainless steel.2) Flat 2-Point Locking Handle - Contemporary: Brushed satin stainless

steel.3) Flat 2-Point Locking Handle - Contemporary: Black titanium stainless

steel.4) Latch Throw: 1 in (25 mm) locking latch in adjustable locking receivers.

a) Locking points adjustable by plus or minus 3/16 in (5 mm).b) Pin locks not acceptable.

5) Forced entry: Standard.6) Forced Entry: Class RC2.7) Force Entry: Class RC3.

08400-24

8. Other Components:a. Vertical Panel Interlock:

1) Interlock Depth: Determined by structural requirements.2) Provide quadruple polyethylene-reinforced Q-Lon seals for vertical panel

interlock with no metal-to-metal contact.3) Maximum Panel Deflection at Interlock: 1/4 in (7 mm).

b. Edge Seals: Provide gasket seals all around the frame, inside and outside, and reinforced brushes, both sides and to the front.

c. Dark bronze anodized, fiberglass reinforced, inserts within head track, sill and side jambs.

9. Fabrication:a. Extruded aluminum frame and rail profiles, sliding hardware, locking hardware

and handles, and glass to construct sliding glass wall assembly.1) Flush joints.2) Each unit factory pre-assembled and shipped KD with all components

and installation instructions.3) Exposed work to be carefully matched to produce continuity of line and

design with all joints.4) No raw edges visible at joints.

G. All-Glass Acoustic Sliding Partitions:1. Product: Provide NanaWall PrivaSEE as manufactured by Nanawall Systems, Inc. All

glass, top-hung, single track sliding system with glass and vertical and horizontal acoustic seals..

2. Performance Criteria:a. Acoustic Performance (ASTM E90): STC 36b. Acoustic Performance (ASTM E1332): OITC 30c. Forced Entry (DIN EN 1191): Passd. Single Action Panels with Offset Hinge - Operation / Cycling Performance (DIN

EN ISO 12400): 100,000 cycles3. Sustainability Characteristics:

a. LEED 2009 (v3)1) MRc1.1: NanaWall exterior glass wall systems, not demolished in a

renovation project, are reused in the same location.2) MRc1.2: NanaWall interior glass wall systems, not demolished in a

renovation project, are reused in the same location.3) MRc2:NanaWall cardboard shipping crates are made of 60 percent

recycled material and are 100 percent recyclable.4) MRc3:NanaWall's components easily disassemble and reassemble to

"Use as salvaged... or reused materials."5) IEQc2:NanaWall systems provide natural ventilation in the open position,

assisting in the 90 percent required natural ventilation of occupied spaces of ASHRAE 62.1.

6) EQc8.1: NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.

7) EQc8.2: NanaWall glass wall assemblies provide direct outdoor lines of sight.

b. LEED v4 for Interior Design and Construction (ID&C)1) MRc1:NanaWall can be easily disassembled for salvage and reuse.2) EQc7:NanaWall glass wall assembly borrowed light brings daylight

deeper into the floor plate.3) EQc8:NanaWall glass wall assemblies provide direct outdoor lines of

sight.4. Design Criteria

a. Sizes and Configurations: As indicated by the drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking

08400-25

bays.b. Unit Operation: Adjustable sliding hardware with top track; sliding type.c. Unit Operation: Adjustable sliding hardware with top track; end single action

type.d. Mounting Type: Top-hunge. Panel Configuration: Straightf. Stack Storage Configuration: Perpendicular to wall.g. Stack Storage Configuration: Parallel to wall.h. Stack Storage Configuration: Remote.i. Stack Storage Configuration: Pocket wall.j. Glass Acoustical Performance (ASTM E413 and ASTM E1332):

1) STC: 34; 3/8 in (10 mm) single, tempered glass.2) STC: 36; 3/8 in (10 mm) single, laminated glass.3) STC: 35; 1/2 in (12 mm) single, tempered glass.4) STC: 38; 1/2 in (12 mm) single, laminated glass.5) STC: 36; 9/16 in (15 mm) single, tempered glass.6) STC: 40; 9/16 in (15 mm) single, laminated glass.7) STC: 41; 3/4 in (19 mm) single, laminated glass.8) STC: 42; 13/16 in (21 mm) single, laminated glass.9) STC: 45; 1 in (25 mm) single, laminated glass.

5. Sliding Partition System: Manufacturer's standard top and bottom rail profiles, with head track, stacking bays, side jambs, with dimensions as shown on Drawings.a. Provide aluminum head track, side jambs, hinges, and face and edges of top

and bottom rails.1) Finish; Anodized (AAMA 611): Clear.2) Finish, Anodized (AAMA 611): Dark bronze.3) Finish; Anodized (AAMA 611): Black.4) Finish; Anodized (AAMA 611): Brushed.5) Finish; Anodized (AAMA 611): Post assembly clear coated.6) Finish; Powder Coat (AAMA 2604):

a) Color: As chosen from manufacturer's full RAL selection; high gloss.

b) Color: As chosen from manufacturer's full RAL selection; matte.7) Finish: ______.

b. Sliding Panel Size (W x H): As indicated.c. Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm)d. Single Action End Panel Width: 43 in (1.092 m)e. Single Action Non-Entry End Panel Width: ______ meeting pocket dimension

constraints.f. Top & Bottom Rail Depth: 2-1/2 in (64 mm).g. Top Rail Width: 4-1/8 in (104 mm)h. Bottom Rail Width: 4-1/8 in (104 mm).i. Rail End Cap: Male/female interlock.j. Sill Type: Floor sockets with No floor track.k. Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).

Thickness: 0.078 in (2.0 mm) nominal.6. Glass and Glazing: Safety glazing per ANSI Z97.1, CPSC 16CFR 1201, and ASTM

C1036.a. Glass Lite: Singleb. Manufacturer's Standard Glass: 3/8 in (10 mm) single, tempered glass.c. Manufacturer's Standard Glass: 3/8 in (10 mm) single, laminated glass,

acoustically enhanced.d. Manufacturer's Standard Glass: 1/2 in (12 mm) single, tempered glass.e. Manufacturer's Standard Glass: 1/2 in (12 mm) single, laminated glass,

acoustically enhanced.f. Manufacturer's Standard Glass: 9/16 in (15 mm) single, tempered glass.

08400-26

g. Manufacturer's Standard Glass: 9/16 in (15 mm) single, laminated glass, acoustically enhanced.

h. Manufacturer's Standard Glass: 3/4 in (19 mm) single, laminated glass, acoustically enhanced.

i. Manufacturer's Standard Glass: 13/16 in (21 mm) single, laminated glass, acoustically enhanced.

j. Manufacturer's Standard Glass: 1 in (25 mm) single, laminated glass.k. Edges: Flat butt for all panels. Exposed edges to be flat polished and ground.l. Factory Glazing:

1) Clamp installed for equal distribution of weight.2) Glass Edge Top Rail Clearance: 1/8 in (3 mm) maximum, with 7/8 in (22

mm) minimum bite.3) Glass installed with bolts only not acceptable.

7. Sliding Hardware:a. Two unidirectional sliding panel carriers that are attached to each panel with a

side adjustable stainless steel cast shoe and a stainless steel ball bearing axle.b. Carriers: Glass fiber reinforced polyamide wheels with memory effect and

polyamide bumpers preventing metal-on-metal contact between top track and carriers

c. Carrying Capacity: 330 lbs (150 kgs). Two carriers on a panel.d. Operation: Single handed. Carriers and panels to be guided into the stacking

bay without error and with single hand operation.e. Adjustment: Provide specified amount of adjustments without removing panels

from tracks.8. Hardware for Single Action End Panels:

a. Offset hinged panel that can swing 170 degrees.b. Foot activated floor bolt, with operation from inside only. ]c. Overhead door closer with hold-open function. ]d. Locking bolt with crank handle at the top rail.

1) Push and pull handles on both sides in brushed stainless steel finish; 11-13/16 in (350 mm) long.

2) Push and pull handles on both sides in brushed stainless steel finish in custom sizes.

3) Pull handle with push plate set in brushed stainless steel finish with length of 11-13/16 in (350 mm).

4) Custom push/pull handles (by others).5) No handles but with pull knob in brushed stainless steel finish. Provide

template for holes and cut outs needed in glass.6) No handles and no knob.

e. Quick release floor bolt with spring loaded security feature, with operation from inside only.1) Push and pull handles on both sides in brushed stainless steel finish; 11-

13/16 in (350 mm) long.2) Push and pull handles on both sides in brushed stainless steel finish in

custom sizes.3) Pull handle with push plate set in brushed stainless steel finish with

length of 11-13/16 in (350 mm).4) Custom push/pull handles (by others).5) No handles but with pull knob in brushed stainless steel finish. Provide

template for holes and cut outs needed in glass.6) No handles and no knob.

f. Bottom rail locking on floor bolt with half mortise cylinder lock, with key operation from inside only.1) Standard lockset; 1-1/8 in mortise lockset, Yale cam with key on inside

and chrome finish, as a temporary construction core.2) Small Format Interchangeable Core (SFIC).

08400-27

3) Large Format Interchangeable Core (LFIC).4) Furnished by Section 08 71 00.

g. Tubo100 push/pull handles on both sides in brushed stainless steel finish with full mortise cylinder lock at handle height, with thumb turn operation from inside and key operation from outside.1) Standard lockset; SFIC rim housing ICR7 as a temporary construction

core.9. Hardware for Single Action Non-Entry End Panels:

a. Offset hinged panel that can swing 170 degrees.b. Locking bolt with crank handle at the top rail.c. Foot activated floor bolt, with operation from inside only.d. Quick release floor bolt with spring loaded security feature, with operation from

inside only.e. Bottom rail locking on floor bolt with half mortise cylinder lock, with key

operation from inside only.1) Standard lockset; 1-1/8 in mortise lockset, Yale cam with key on inside

and chrome finish, as a temporary construction core.2) Small Format Interchangeable Core (SFIC).3) Large Format Interchangeable Core (LFIC).4) Furnished by Section 08 71 00.

10. Panels with Push/Pull Handles or Knobs: Provide handle height centered at 41-3/8 in (105 cm) from bottom of the panel or as indicated otherwise.

11. Other Locking:a. Between Sliding Panels: Self-activated automatic interlock for floor bolts.b. Floor Bolts: 1-3/16 in (30 mm) deep, adjustable, eccentric floor sockets.

12. Other Components:a. Horizontal Seals: At top and bottom rails, provide sealing brush with double fins

on the inside and self-activated adjustable compression seal on the outside.b. Transparent Vertical Edge Acoustical Seals: Between panels, provide UV

resistant edge mounted gaskets.1) Light Transmission (LT): 75 percent or higher per ASTM D1003.

c. Vertical Side Jamb Seals: Between side jambs and panels, provide double EPDM seals.

13. Fabricationa. Extruded aluminum frame and rail profiles, sliding hardware, locking hardware

and handles, and glass to construct sliding glass wall.1) Each unit factory pre-assembled and shipped with all components and

installation instructions.2) Exposed work to be carefully matched to produce continuity of line and

design with all joints.3) No raw edges visible at joints.

14. Accessories: Sidelights with finish to match, as indicated. See Door Schedule.

2.6 EXTERIOR ALL GLASS ALUMINUM FRAMED WINDOW WALL SYSTEMS.

A. Design Criteria:1. Sizes and Configurations: As indicated by the drawings for selected number and size

of panels, location of swing panels, layout of head, jamb and sill, and location of tracks and stacking bays.

2. Unit Operation: Slide and pivot.3. Configuration: Straight.4. Configuration: Segmented angled curve.5. Configuration: Full circle.6. Configuration: 90 degree angle turn.7. Configuration: 180 degree angle turn.8. Configuration: With open corners.

08400-28

9. Stack Storage Configuration: Stack at 90 degree against jamb wall.10. Sill: Standard.11. Sill: Flush (recessed).12. Maximum Panel (W x H): 31 x 108 in (787 x 2743 mm).13. Maximum Panels per Stack: 12.14. Maximum Gap Between Panels: 1/8 in (3 mm).15. Mounting Type: Top-hung.16. Track: Single track at head with adjustable compensating channel and floor.17. Finish: Anodized (AAMA 611): Clear.18. Finish: Anodized (AAMA 611): Dark Bronze.19. Finish: Powder Coat (AAMA 2604): Manufacturer's 50 standard color selection.20. Finish: Powder Coat (AAMA 2604): Manufacturer's full RAL selection.21. Finish: Powder Coat (AAMA 2604): Custom finish.22. Gloss - Finish: High Gloss.23. Gloss - Finish: Matte.24. Glass and Glazing:

a. Glass Lites: Single.b. Glass Thickness: 1/4 in (6 mm).c. Glass Thickness: 5/16 in (8 mm).d. Glass Thickness: 3/8 in (10 mm).e. Glass Thickness: 1/2 in (12 mm).f. Glass Type: Tempered.g. Glass Type: Laminated.h. Glass Type: Bird Safe.i. Glass Treatment: None.

B. Performance Criteria (Lab Tested): Standard Sill.1. Structural Loading (ASTM E330) with 1/2 in (12 mm) Tempered Glazing:

a. Load Structure: At 1.5 times design wind pressure with no glass breakage or permanent damage to fasteners or storefront components.1) Reinforced Locking at Turn Panel and Top and Bottom Latches:


2) Standard Locking at Turn Panel and Top and Bottom Latches:a) Design Pressure Positive: 25 psf (1190 Pa).b) Design Pressure Negative: 45 psf (2150 Pa).

2. Water Penetration (ASTM E331) Water Spray Test for 15 Minutes at the Rate of 5 gal./f2/h (3.4 L/m2/min.):a. 3.1 fluid oz. (0.091 L) at 0 psf (0 Pa); (0.03 percent of total water sprayed).b. 14.6 fluid oz. (0.43 L) at 1.57 psf (75 Pa); (0.16 percent of total water sprayed).c. 144 fluid oz. (4.26 L) at 6.24 psf (300 Pa); (1.55 percent of total water sprayed).

C. Sliding-Pivot All-Glass Entrance and Storefront System: Head, jamb, height compensating profile above head jamb, side jambs, sill, sliding panels, and swing panels with dimensions as shown on Drawings. System without height compensating profile for installation not acceptable.1. Provide Model SL25 as manufactured by Nanawall Systems, Inc.2. Sliding and Turn Panels: Standard single glass lite with extruded aluminum top and

bottom rails.3. Top and Bottom Rail:

a. Rail Size - Standard Sill: 1-1/16 x 1-7/8 in (27 x 48 mm).b. Rail Size - Recessed Sill: 1-1/16 x 1-11/16 in (27 x 43 mm).c. Rail Size - XXL: 1-1/4 x 2-13/16 in (31 x 72 mm).d. Swing Door Bottom Rail Size: 1-1/4 x 9-13/16 in (31 x 250 mm).

4. Aluminum Extrusion: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).a. Thickness: 0.059 in (1.5 mm) nominal.

08400-29

5. Locking Hardware on Turn Panel:a. Provide manufacturer's standard patented (US Patent No. 6,618,994) spring

tensioned cable and concealed top and bottom latches made of high density plastic operated by1) Pull of cable on the inside only for an inswing unit.2) The turn of a knob on the inside only for an outswing unit.3) Turn of knobs located on both sides.

a) Provide reinforced special locking.b. Provide a center latch engaging into a strike plate mounted on the adjacent

sliding panel operated by level handles on both sides and lockable with key cylinders from either side.

6. Light Commercial Swing Door: Furnished by Section 08420.a. Hardware: Provide standard hardware as follows:

1) Door Closer: Floor Mounted Geze TS 500 NV.2) Key Cylinder Lock: Bottom rail mounted; for cylinder core see Section

08710.3) Push-Pull Handles: Gray anodized aluminum.

7. Sliding Hardware: Provide manufacturer's standard hardware.a. For each sliding panel, provide two wheeled unidirectional sliding panel carriers

with running surface of glass fiber reinforced polyamide.b. Each Carrier Minimum Carrying Capacity:

1) 80 lbs. (36 kg) for Standard SL25 Panel.2) 143 lbs. (65 kg) for SL25XXL Panel.

8. Other Components:a. Threshold - Standard Sill: Extruded aluminum.

1) Finish: Clear anodized finish.2) Finish: Bronze anodized finish.3) Finish: Powder coat finish to match panels.

b. Threshold - Flush Sill (Recessed): Aluminum.1) Finish: Clear anodized finish.2) Finish: Bronze anodized finish.

c. Weatherstripping: ATPK and brush seals between panels and between panel and frame.

d. Fasteners: Stainless steel machine screws.

2.7 INTERIOR ALL GLASS ALUMINUM FRAMED WINDOW WALL SYSTEMS.

A. All Glass Folding Partition: All glass, top-hung, single track hinged-panel folding system with no vertical profiles. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, floor track, side jambs, folding-swing panels with dimensions as shown on Drawings.1. Product: Model FSW75 as manufactured by Nanawall Systems, Inc.2. Sizes and Configurations: As indicated by the drawings for selected number and size

of panels, and location of swing panels.3. Unit Operation: Folding type.4. Unit Operation: Folding single action type.5. Panel Type: Single6. Panel Type: Paired7. Panel Configuration: Straight8. Panel Configuration: 90 degree angle turn/ open corner9. Panel Configuration: Window/ door combination.10. Sill Type: Floor track with anodized guide track.11. Panel Size (W x H): As indicated.12. Panels: Single lite.13. Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm).14. Top & Bottom Rail Depth: 1-7/16 in (36 mm).

08400-30

15. Top Rail Width: 3-15/16 in (100 mm).16. Top Rail Width: 5-1/4 in (133 mm).17. Top Rail Width (in / mm): ______.18. Top Rail Width: 7-13/16 in (198 mm).19. Top Rail Width: 10 in (254 mm).20. Bottom Rail Width: 3-15/16 (100 mm).21. Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).22. Bottom Rail Width: 5-1/4 in (133 mm).23. Bottom Rail Width: 7-13/16 in (198 mm).24. Bottom Rail Width: ADA, 10 in (254 mm) kickplate.25. Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.

a. Finish: Closest aluminum match to rail finish.b. Edges: Flat mitered at corner panels.

26. Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).a. Thickness: 0.078 in (2.0 mm) nominal.

B. All Glass Center Pivot Partition: All glass, top-hung, single track folding system with no vertical profiles. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, floor sockets, side jambs, folding-swing panels with dimensions as shown on Drawings.1. Product: Model CSW75 as manufactured by Nanawall Systems, Inc.2. Sizes and Configurations: As indicated by the drawings for selected number and size

of panels, and location of swing panels.3. Unit Operation: Center pivot single action type.4. Panel Type: Single5. Panel Type: Paired6. Panel Configuration: Straight.7. Panel Configuration: 90 degree angle turn/ open corner.8. Panel Configuration: Window/ door combination.9. Sill Type: Floor sockets with No floor track or sill.10. Panel Size (W x H): As indicated.11. Panels: Single lite.12. Head Track (W x H): 2-7/8 x 2-3/4 in (73 x 70 mm)13. Top & Bottom Rail Depth: 1-7/16 in (36 mm)14. Top Rail Width: 3-15/16 (100 mm)15. Top Rail Width: 5-1/4 in (133 mm).16. Top Rail Width: 7-13/16 in (198 mm).17. Top Rail Width: 10 in (254 mm).18. Bottom Rail Width: 3-15/16 (100 mm) kick plate.19. Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).20. Bottom Rail Width: 5-1/4 in (133 mm).21. Bottom Rail Width: 7-13/16 in (198 mm).22. Bottom Rail Width: ADA, 10 in (254 mm) kickplate.23. Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.

a. Finish: Closest aluminum match to rail finish.b. Edges: Flat mitered at corner panels.

24. Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).a. Thickness: 0.078 in (2.0 mm) nominal.

C. Sliding Glass Partition: All glass, top-hung, single track sliding system with no vertical profiles, and a 2-in-1 release system allowing for a selected sliding panel to convert into a single/double action panel or vise versa. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, stacking bays, side jambs, sliding-swing panels with dimensions as shown on Drawings.1. Product: Model HSW75 as manufactured by Nanawall Systems, Inc.2. Sizes and Configurations: As indicated by the drawings for selected number and size

08400-31

of panels, and location of swing panels.3. Unit Operation: Sliding type.4. Unit Operation: Sliding single/double action type.5. Unit Operation: End single/double action type.6. Panel Configuration: Straight.7. Panel Configuration: Segmented curve.8. Panel Configuration: True curve.9. Panel Configuration: 90 degree angle turn/ open corner.10. Panel Configuration: 135 degree angle turn.11. Panel Configuration: Window/ door combination.12. Stack Storage Configuration: Parallel to jamb13. Stack Storage Configuration: Parallel to wall14. Stack Storage Configuration: Remote.15. Stack Storage Configuration: Pocket wall.16. Mounting Type: Top-hung.17. Sill Type: Floor sockets with No floor track.18. Panel Size (W x H): As indicated.19. Panels: Single lite.20. Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm)21. Top & Bottom Rail Depth: 1-7/16 in (36 mm)22. Top Rail Width: 3-15/16 (100 mm)23. Top Rail Width: 5-1/4 in (133 mm).24. Top Rail Width: 7-13/16 in (198 mm).25. Top Rail Width: 10 in (254 mm).26. Bottom Rail Width: 3-15/16 (100 mm).27. Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).28. Bottom Rail Width: 5-1/4 in (133 mm).29. Bottom Rail Width: 7-13/16 in (198 mm).30. Bottom Rail Width: ADA, 10 in (254 mm) kickplate.31. Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.32. Rail End Cap Finish: Closest aluminum match to rail finish.33. Rail Edges: Flat mitered at corner panels.34. Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).

a. Thickness: 0.078 in (2.0 mm) nominal.

D. Finish: Aluminum head track, hinges/pivot points and face of top and bottom rails.1. Anodized (AAMA 611): Clear2. Anodized (AAMA 611): Dark bronze3. Anodized (AAMA 611): Black4. Anodized (AAMA 611): Brushed5. Powder Coat (AAMA 2604): Color as chosen from manufacturer's powder coating

finish chart from RAL selection.6. Powder Coat (AAMA 2604): Custom finish as specified by the Architect.

a. Gloss - Finish: High Gloss.b. Gloss - Finish: Matte.

7. Finish: Post assembly clear coated8. Metal Cladding: Aluminum Finish on Face of Top and Bottom Rails:9. Metal Cladding: Brushed stainless steel10. Metal Cladding: Polished stainless steel11. Metal Cladding: Polished brass12. Metal Cladding: Satin brass

E. Glass and Glazing:1. Glass Thickness: 1/2 in (12 mm).2. Glass Thickness: 3/8 in (10 mm).3. Glass Thickness: 9/16 in (15 mm).

08400-32

4. Glass Thickness: 3/4 in (19 mm).5. Glass Thickness: 13/16 in (21 mm).6. Glass Thickness: 1 in (25 mm).7. Glass Type: Tempered.8. Glass Type: Laminated.9. Glass Acoustical Performance (ASTM E413 and ASTM E1332):

a. STC: 35; 1/2 in (13 mm) single, tempered glass.b. STC: 38; 1/2 in (13 mm) single, laminated glass.c. STC: 34; 3/8 in (10 mm) single, tempered glassd. STC: 36; 3/8 in (10 mm) single, laminated glasse. STC: 36; 9/16 in (15 mm) single, tempered glassf. STC: 40; 9/16 in (15 mm) single, laminated glassg. STC: 41; 3/4 in (19 mm) single, laminated glassh. STC: 42; 13/16 in (21 mm) single, laminated glassi. STC: 45; 1 in (25 mm) single, laminated glass

F. Hardware:1. Performance Criteria (Lab Tested):

a. Forced Entry (DIN EN 1191): Pass.b. Single/Double Action Panels with Pivot Points - Operation / Cycling

Performance (DIN EN ISO 12400): 100,000 cycles.2. Carrier Hardware: Manufacturer's standard.3. Hinge Hardware: Manufacturer's standard.4. Locking Hardware: As available from manufacturer selected by Architect.5. Handles: As available from manufacturer selected by Architect.6. Push/Pull Handles, Knobs, Rosettes, or Panic Devices: As available from

manufacturer selected by Architect.

G. Accessory Components:1. Edge Seals: Provide sealing brush for outside of top rail.2. Bumpers: Provide recessed soft polyamide bumpers on one end of sliding panel end

caps at the top and bottom.3. Gaskets Between Panels: Clear UV resistant edge mounted gaskets.

2.8 ACCESSORlES

A. Insect Screen Panels: Fully retractable non-pleated screen made of ultra-strong, UV resistant fiberglass mesh housed in a single cartridge riding on a single track.1. Basis of Design Product by Manufacturer: Screen ONE or an Architect acceptable

equivalent subject to project requirements.2. Finish - Aluminum Top Track, Side Jambs and Vertical Struts:

a. White powder coated.b. Clear anodized.c. Black powder coated.d. Classic bronze powder coated.

B. Insect Screen Panels: A series of top-hung collapsible pleated UV resistant fiberglass mesh screen panels riding on a single narrow ADA compliant 1/4 in (6 mm) floor track. Each 4 in (102 cm) wide vertical cassette can expand to 39 in (1 m) wide.1. Product: Screen Classic as manufactured by Nanawall or an Architect acceptable

equivalent subject to project requirements.2. Finish - Aluminum Top Track, Side Jambs and Vertical Struts:

a. White powder coatedb. Clear anodizedc. Dark bronze anodizedd. RN powder coated with color as selected by architect.

3. Screen Track Stacking: Within opening or extended beyond opening as indicated or

08400-33

required.

PART 3 EXECUTION

3.1 EXAMINATION

A. Because of the large dimensions involved and the weight and movement of the panels, verify the structural integrity of the header such that the maximum deflection with both the live and dead loads is limited to be the lesser of L/720 of the span and 1/4 in (6 mm).

B. Examine surfaces of openings and verify dimensions. Verify rough openings are level, plumb, and square, with no unevenness, bowing, or bumps on floor. Do not begin installation until openings have been properly prepared.

3.2 PREPARATION

A. Prepare openings using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install frame in accordance with manufacturer's recommendations and installation instructions. Properly flash and waterproof around the perimeter of the opening.

B. Finishing: Field finish under Section 09900 - Painting; seal and finish promptly after installation and prior to exposure to weather in accordance with manufacturer recommendations.

C. Accessories: Screens; install in accordance with screen manufacturer's recommendations and installation instructions.

3.4 PROTECTION

A. Protect installed products until completion of project.

END OF SECTION

08400-34

· web viewby combining precision engineering and outstanding design options across more than 20...

Documents