voormi 11x17 copy

interior view

exterior

MEN’SLARGE

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODY FOR MEN

R E E C E D E S I G N , I N C .

exterior

interior view

WOMEN’SLARGE

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODY FOR WOMEN


CF ZIPPER-~CONSIDER GOING TO A LIGHTER WEIGHT ZIPPER. POSSIBLY A 3 OR 2.5 COIL?

~I LIKE THE LOOK OF THE INTERIOR ZIPPER TEETHFOR THE CF ZIP. IF YOU DO THIS, IT IS EXTREMELYIMPORTANT THAT YOU USE AN INTERIOR STORM FLAP, PREFERRABLY ONE THAT COVERS THE ZIPPER HEAD, AS SKETCHED.

~THE GAP BEWTEEN THE ZIPPER TAPE AND THEGARMENT EDGE COULD BE MORE NARROW. IT ISCURRENTLY .75” WIDE AND COULD BE .5“.

CF ZIP HEAD

.5” WIDENYLON

GROSSGRAINRIBBON

ORBEMISTAPE

SELF-FABRICINTERIOR

STORMFLAP

COVERSZIPPERHEAD

5.” WIDEZIPPER

TAPEWITH

INVERTEDTEETH

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODY


LINING~THE CHEST LINING IS A GOOD SOFT MESH. THEEDGES CAN BE CLEAN FINISHED WITH THE CFZIPPER SELVAGE HIDDEN AWAY. THE INTERIORSTORM FLAP CAN BE INSERTED INTO THIS CONSTRUCTION.

~IF YOU STAY WITH AN EMBROIDERED CHESTLOGO, THE INTERFACING AND BULK OF THESTITCHING CAN BE HIDDEN UNDER THIS MESHLAYER.

~THE FRONT LATERAL STITCH LINE CAN BEELIMINATED FROM THE FRONT OF THE GARMENTBY INCORPORATING THE TOP EDGE OF THEPOCKET BAG CONSTRUCTION INTO THE MESHLINING, AS DRAWN.

interior view

MEN’SLARGE



HOOD~THE HOOD IS GOING TO BE WORN DOWNROUGHLY 90% OF THE TIME AND THE INTERIOR OFTHE HOOD NEEDS TO BE CLEANED UP A BIT. CURRENTLY, THE FLATLOCK SEAMS HAVE EXCESSSELVAGE IN THEM AND AREN’T ‘CLEAN’. I WOULD LIKE TO LINE THE HOOD WITH THE MESH FABRIC TOGIVE IT MORE OF A ‘DIALED DOWN’ LOOK.

~A LINING GIVES YOU CONTRAST OR TONALCOLOR OPPORTUNITIES THAT CAN MAKE A PRODUCT PRESENT EXTREMELY WELL AT POINTOF PURCHASE OPPS.

~ THE HOOD FRAME BINDING NEEDS TO BE PERFECT. I LIKE THE SOFTNESS OF THE BRUSHEDMATERIAL CURRENTLY BEING USED NOW, BUT ITIS UNEVEN IN PLACES AND IT DOESN’T GIVE. ANY STRETCH WOULD HELP TIGHTEN THE HOODFRAME UP JUST A BIT, WHICH WILL BE AN ISSUEAPPRECIATED BY THE WEARER. THIS WILL BE ONE OF THE MAIN SELLING POINTSWHEN A CONSUMER IS CONSIDERING THEGARMENT, AS WELL AS ONE OF THE MAIN DETAILSTHAT WILL MAKE THIS GARMENT.

~FOR THE WOMEN’S STYLE, THE PONYTAIL OPENINGAT THE BACK OF THE HOOD SHOULD OPEN DOWN,NOT UP AS IS CURRENTLY CONSTRUCTED. THERESHOULD ALSO BE A GREATER OVERLAP OF APPROX1” RATHER THAN 5/8” WHICH IT IS CURRENTLY.

WOMEN’SLARGE

PONYTAILOPENING

DIFFERENTIALOF 1” TO 1.5”

interior view

interior view

exterior view

1/4” WIDELYCRA

TAPEBINDING

LOGONECKTAPE

chun wo ho co., ltd CW07-047

1/4” WIDE LYCRA TAPE BINDING EXAMPLE



POCKETS~CAN WE CHANGE TO A SOFT PULL FOR THEINTERIOR POCKET ZIP? THE HEADS CAN ABRADEBASELAYER OR SKIN.

~I WOULD ADVISE A CHANGE TO SOFT LOCKINGHEADS FOR THE EXTERIOR POCKETS

~NYLON TWILL TAPE ZIP PULLS WITH LOGOIN COLORED SILICONE GRIP

~FOR THE HANDWARMER POCKETS, TURNED THEPOCKET OPENINGS OUTWARD SLIGHTLY TO GIVETHE HAND MORE PROTECTION IN ADVERSECONDITIONS.

~I ALSO EXTENDED THE TOP LINE TO MEET THE MESHLINING TO ELIMINATE THE LATERAL SEAM, BUT THISALSO GIVES THE POCKET BAG MORE ROOM FORSOMETHING LARGER LIKE A MAP OR WATERBOTTLE,AND I THINK SIZE WILL MATTER HERE.

~I GAVE THE POCKET BAG A CURVED BOTTOMSEAM SO THE CONTENTS DON’T POOL IN THEMIDDLE.

~ALL YOU HAVE TO DO IS THROW EITHER A SEWNEYELET OR A HEAT TRANSFER CIRCLE FOR ANY MP3CONSIDERATION. ONE STEP FURTHER COULD BEAN INNER MESH POCKET SEWN TO THE INNER SIDEOF THE KANGAROO POCKET FOR A NANO ORWHATEVER PEOPLE HAVE.

CURVED BOTTOM SEAM

exterior

POCKET OPENINGSTURNED OUTWARDSLIGHTLY

POCKET BAG SEWN TO MESHLINER AT LATERAL SEAM.

NYLON TWILL TAPEZIP PULLS WITH

LOGO IN COLOREDSILICONE GRIP

SOFTLOCKINGHEADFOR THEINTERIORPOCKETZIPPER



POCKET ZIPPERS~A WELDED HF TRANSFER AT THE POCKET ZIPSWOULD ADD A LOT TO THE GARMENT, EVEN IFIT IS JUST A PARTIAL REINFORCEMENT TO THEPOCKET ZIP, IF THIS DETAIL IS TOOEXPENSIVEFOR THE GARMENT, A SIMPLE SELF-FABRIC ZIPHEAD GARAGE COULD SIGNIFICANTLY ADD TOTHE QUALITY OF THE GARMENT WITHOUT ADDING COST.



CUFFS~WE CAN STAY WITH THE FINGERTIP POCKET DETAILBY ADDING A STITCH LINE AT THE TOP EDGE OF THECUFF POCKET TO THE CUFF SEAM ON THE MEDIALSIDE OF THE ARM. SEE SKETCH. I THINK THIS IS AWORTHWHILE FEATURE THAT WOULD BE SEEN AS AGOOD VALUE FOR THIS PIECE.

~I LIKE THE ELIPTICAL CUFF AND THINK IT SHOULDBE ON A GARMENT OF THIS WEIGHT.

~I DON’T THINK YOU SHOULD PUT A LOGO ON THECUFF, ESPECIALLY IF IT IS GOING TO BE EMBROIDERED. IT IS TOO HIGH OF AN ABRASION AREA FOR ANY-THING TO HOLD UP WELL AND IS ALSO AN AREAWHERE YOU DON’T WANT ANY BULK OR LACK OFSTRETCH OR GIVE.

~TWO POINTS ON THE THUMB OPENING: 1. IT IS IN THE WRONG PLACE. IT NEEDS TO BECENTERED ON THE FRONT HALF OF THE CUFFRATHER THAN ON THE INSEAM. IF YOU USE THETHUMB OUTLET, YOU HAVE TO TWIST THE SLEEVEAND THE ELIPTICAL CUFF BECOMES OFF KILTER. 2. IT COULD BE CONSTRUCTED MORE EFFECTIVELYWITHOUT LEAVING AN OPENING IN THE CUFF IF YOUAREN’T USING THE THUMB OPENING. CHECK OUTTHE SKETCH AND LETME KNOW WHAT YOU THINK.

FLATLOCKSTITCH

.25” WIDELYCRA TAPEEDGING

OVERFLAP

UNDERFLAP DOUBLE NEEDLE

TOP STITCH

THUMBOPENING

6.25”

2”

2.25”

2”

1”



NECK~I GAVE THIS GARMENT NECK TAPE FOR A CLEANFINISHED NECKLINE WHERE THE EYE WILL TRAVEL WHEN FIRST VIEWING THIS PRODUCT.

~I THINK A LOCKER LOOP WILL BE A WORTHWHILEASSET AS WELL. THIS CAN BE .25” WIDE GROSSGRAINRIBBON.

~I LINED THE BACK PANNEL OF THE GARMENT, WHICH ALSO GIVES THE BACK LABEL ACONNECTION POINT THAT ISN’T THE FACE FABRIC.

~FOR THE MAIN LABEL AND SIZE LABEL, IT MIGHT BEA NICE LOOK TO HAVE THESE PIECES HEAT TRANSFEREDON. IF NOT, THE STITCHING ISN’T A BAD LOOK.

NECK TAPE DETAIL

3/8” WIDE FINISHED POLY TWILL TAPE

MEN’SLARGE



LOGOSEMBROIDERY IS AN OK WAY TO GO BUT THE NATUREOF THE STITCHING DOESN’T WEAR WELL OVER TIME. SILICONE HEAT TRANSFERS OFFER A SHARPER EDGE, TEND TO HOLD THIER APPEARANCE OVER TIME, AND DON’T HAVE THE BULK OF THE STITCH STRUCTURENECESSARY FOR EMBROIDERY.

SILICONE HEAT TRANSFERS SHOW COLOR WELLAND CAN BE USED TO SHOW THE LOGO AS ATRANSLUCENT TEXTURE CHANGE OR A SEMI-TRANSPARENT PARTIAL COLOR TREATMENT THAT CAN LOOK VERY TECHNICAL AND LIGHT. SO THE LOGO CAN STAND OUT AS A GLOSS OR MATTE TEXTURE CHANGE ON A WOOL FABRIC, WHICH LOOKS PRETTY COOL.

THERE IS ALSO THE POSSIBILITY THAT YOU COULDUSE AN EMBOSSED TREATMENT FOR EITHER THE LOGO OR THE WORDMARK ON OTHER GARMENTS.I DON’T SUGGEST YOU TRY IT ON THESE PIECES ANDPOSSIBLY NOT UNTIL LATER SEASONS WHEN YOURBRAND IDENTITY IS FURTHER ESTABLISHED.

CONSTRUCTION~IF YOU COULD USE A DTM THREAD COLOR FORTHE FLATLOCK, IT WILL GO A LONG WAY INPERCEIVED WORKMANSHIP.

~THE INTERIOR SIDE OF THE FLATLOCK STITCHSHOULD USE ‘FLUFF’ THREAD, WHICH IS JUST THREADTHAT ISN’T TWISTED. THIS WILL BE MUCH SOFTERAND IS A STANDARD PRACTICE WITH MOSTTECHNICAL OUTDOOR COMPANIES.

~FOR LIGHTER WEIGHT FABRICS YOU SHOULDCONSIDER THE MICRO FLATLOCK. IT’S NOT REALLYA TRUE FLATLOCK, BUT IS MORE OF A SOFTER MODIFIED COVERSTSITCH THAT ELIMINATES SELVAGE. I AM NOT SURE IF YOU CAN USE THIS STITCH FOR THIS WEIGHT OF FABRIC. IT IS A SPECIFIC MACHINETHAT YOUR FACTORY WOULD NEED TO OWN ORHAVE ACCESS TO.



modified existing design for men

updated design for men

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODYREDESIGNED MEN’S HIGH E HOODY


modified existing design for women

updated design for women

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODYREDESIGNED WOMEN’S HIGH E HOODY


Pantone 15-1058radiant yellow

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODY FOR MEN, WITH DARKER TONAL TOP STITCHING AND RADIANT YELLOW LINING AND TRIM


Pantone 13-0650sulpher spring

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODY FOR WOMEN, WITH LIGHTER TONAL TOP STITCHING AND SULPHER SPRING LINING AND TRIM


duraflex PZA207SSTR01duraflex Z-GS066XJ01 duraflex Z-GS070XJ01 duraflex Z-GS113LJ01

duraflex PZA059STR01-JL duraflex Z-GS065XJ01duraflex P-YL923TU01 duraflex P-YL618TU01 duraflex P-YL658tu01

ykk rubber 3c DSYG

CENTER FRONT ZIPPER

EXTERIOR POCKET ZIPPER

INTERIOR POCKET ZIPPER

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODYTRIM SHEET- ZIPPER PULL SUGGESTIONS


Bemis overlay tape on a zipper

these are textures the tape comes in:

*i recommend this one.

.5” WIDENYLON

GROSSGRAINRIBBON

ORBEMISTAPE

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODYTRIM SHEET- INTERIOR STORM FLAP ZIP GUARD


MEN’SLARGE

LOCKERLOOP

I LIKE THE QUALITY OF #CW07-003 BETTER THAN #CW07-004 BECAUSE THE LOGO IS TIGHTER

THIS COULD BE A NICE DETAIL, BUT COULD ALSO BE OVERKILL.

REECE DESIGN INC FOR VOORMIFALL 2013HIGH-E HOODYTRIM SHEET- LOCKER LOOP


voormi 11x17 copy

Documents