vmi - valve monitoring interface - · pdf filestabilize your process hot runner technology...
If you can't read please download the document
TRANSCRIPT
E l e v a t e y o u r p r o c e s s
H O T R U N N E R T E C H N O L O G Y
Valve Monitoring Interface - VMIProduct-Catalog
CAT-07-0004_EN-Rev02 EN 03/2018
CAT-07-0004_EN-REV02
H O T R U N N E R T E C H N O L O G Y
Valve Monitoring Interface
Master Language is English
2018 Synventive Molding Solutions All rights reserved. Errors and omissions excepted
For a specific application, please consult Synventive
Fully closed In transition Fully opened
06 04.3004 04.68
Signal Input
LCD Display
Calibration Button
Power supply
DB50 ConnectorOpen / Close Signal Output
Zone Up ButtonLine Select Button
Zone Down Button
LED light definition
Product Description
Operation Principle, Application, Benefits The Valve Monitoring Interface (VMI)
enables valve gate piston monitoring from outside the mold tool. With VMI you are able to check that the piston are traveling as intended, and read actuator opening times, during the molding process.
Areas of Application A sensor installed on each actuator
sends position signals to a junction box. This data is transferred from the junction box to the main module, and then displayed visually on the main module. Green/Yellow/Red LED lights convey respective Opened/Transition/Closed piston position status data.
1. Main Module Provides up to 24 zones of visual status
indication. An LCD displays time taken to go from
Closed to Opened, for any two zones. Relay outputs provide fully opened and
fully closed signals to other equipment via the DB50 connector.
The Main Module has permanent magnets to enable mounting onto any magnetizable surface.
2. Junction Box The Junction Box is the interface
between the main module and the piston position sensors.
12 & 24-zone junction boxes are available. Calibration data is stored in the Junction Box, allowing the Main Module to be used between multiple Hot Runner Systems.
Facilitates simple upgrade to synflow by using the same junction box.
Additional InformationFor detailed information see the latest user guide SVC-07-0004_EN-REV##
Product Description
-2-
Illustrations simplified, schematically drawn and not to scale. All dimensions in mm.
CAT-07-0004_EN-REV02
H O T R U N N E R T E C H N O L O G Y
Valve Monitoring Interface
Master Language is English
2018 Synventive Molding Solutions All rights reserved. Errors and omissions excepted
For a specific application, please consult Synventive
Signal Cable
Junction BoxMain Module
Tool Side Machine Side
Power Supply
Actuator withPosition Sensor
ComponentsValve Monitoring Set-up
1. Tool Side - Hot Runner Systema) Actuator with Position Sensor
b) Junction Box: SF3-12Z-JB-01 (12 Zone) SF3-24Z-JB-01 (24 Zone) SF3-12Z-JB-02 (12 Zone, QCVG16M06 only) SF3-24Z-JB-02 (24 Zone, QCVG16M06 only)
c) Mounting Bracket VMI-##ZJBE-MB
2. Machine SideMain Module Kit VMI-MMK01 containing below elements and Signal Cable 4 m lengthMain Module Kit VMI-MMK02 containing below elements and Signal Cable 7 m length
d) Main Module: VMI-MMA01
Current 24 VDC 1 A
Temperature 0 - 50 C (32 - 122 F)Humidity
www.synventive.com
North AmericaSynventive Molding Solutions Inc.10 Centennial DrivePeabody, MA 01960, USATel.: +1 978 750 8065Fax: +1 978 646 3600E-Mail: [email protected]
EuropeSynventive Molding Solutions GmbHHeimrodstr. 1064625 Bensheim, GermanyTel.: +49 (0) 6251 / 9332-0Fax: +49 (0) 6251 / 9332-90E-Mail: [email protected]
AsiaSynventive Molding Solutions (Suzhou) Co.Ltd.12B Gang Tian Industrial SquareSuzhou Industrial Park, China 215021Tel.: +86 512 6283 8870Fax: +86 512 6283 8890E-Mail: [email protected]
CAT-07-0004_EN-REV01 2018-03-072018 Synventive Molding Solutions DTP: KA