vak pak replacement parts catalog · vak pak replacement . parts catalog . 2 . page #’s. contents...
TRANSCRIPT
1
Vak Pak Builders Supply, Inc.
9731-1 Beach Blvd. / Jacksonville, FL 32246
Ph: 904-642-2267 / Fax: 904-641-2012
Toll Free: 888-682-5725 / E-mail: [email protected]
Web Site: www.vakpak.com
Vak Pak Replacement Parts Catalog
2
Page #’s Contents
2 Table of Contents
3 Introduction to Vak Pak Builders Supply, Inc.
4 Gauges, Thermometer, Filter Cartridges and Grids
5 Flowmeters
6-9 IG / IG3 Pumps, Pump Curves, and Replacement Parts
10-11 Push Pull Valves and Replacement Parts
12 Spin Valves
13 Crank Style Valve Repair kits, and Misc. Valves
14-15 FWLC (Float Water Level Control)
16-17 RWLC (Reservoir Water Level Control)
18-19 DP100 (Dynapure 100 & 150 SF Filter)
20 Vak Pak 84SF Separator Tank
21 Chlormatic and Bromatic Replacement Parts
22 Chlorine and PH Controllers and Liquid Feeders
23 Remote Chemical Storage Crocks
24 Cabinet Replacement List By Model Number
25-26 Cabinet Replacement Parts
27-39 Cabinet Specifications
39 Collector Tank Skirt, Cabinet Identification
40-42 Main Drains, VGB Compliant
43 Main Drain Model Identification
44 Grates & Unblockable Drains, VGB Approved
45 Terms & Conditions
Table Of Contents
3
Model
Number
Description
21003 Vacuum Gauge 0-30 PSI 2”
21001 Pressure Gauge 0-60 PSI 2” Back
Mount
21002 Pressure Gauge 0-60 PSI 2” Bottom
Mount
Model
Number
Description
21100 Thermometer, 2-1/2” In Line
Model
Number
Description
33850 Grid, DE 19” Round
33860 Spacer for DE Element
FC-9740 13.5” Anthony Rectangular Grid
FC-9750 17.5” Anthony Rectangular Grid
Gauges and Thermometers
D.E. Grids
Vak Pak Builders Supply stocks a
full line of replacement elements
& D.E. Grids for many
popular filters.
FC-9740 33850
33860
FC-9750
4
Pt. Number
20910 Pt. Number
20911
Base is now
1/2” MPT
Flowmeters
Part
Number
Description Part
Number
Description
20650 1 1/2” Blue White 82222 2” Digital Readout
20700 2” Blue White 82291 2-1/2” Digital Readout
20750 2 1/2” Blue White 82319
4” Digital Readout
20800 3” Blue White 83320 3” Remote Readout
20850 4” Blue White 82320 4” Remote Readout
20900 6” Blue White 20725 Mecomatic 2”
20905 8” Blue White 20915 Mecomatic 2 1/2”
20910* Chlorinator 1/2”
MPT
20920 Mecomatic 3”
20911 Chlorinator
W / 90 Both Ends 20930 Mecomatic 4”
209102 Base, 1/2” MPT For
20910
Mecomatic
Blue White
Battery Powered
Digital Readout
Battery Powered
Remote Readout
5
Vak Pak IG / IG3 Pumps
We also stock standard square & round flange pump
motors, from 1-HP to 3-HP.
“IG” and “IG3” Vak Pak’s “IG” and “IG3” cast iron centrifugal pumps have been designed for general
water recirculation. The motor is easily withdrawn by removal of accessible bolts, which
provide access to the impeller without disturbing existing piping.
“IG” The “IG” uses a standard 1750 RPM motor, and is available from 5 hp through 10 hp.
The IG pump comes with 4” FPT suction, and 3” FPT discharge ports.
“IG3” The “IG3” uses a standard 1750 RPM motor, and is available from 5 hp through 7.5 hp.
The IG3 pump comes with 3” FPT suction, and 2-1/2” FPT discharge ports.
6
“IG” and “IG3” Series Pump Curves
“IG-3” SERIES
“IG” SERIES
TO
TA
L D
YN
AM
IC H
EA
D I
N F
EE
T
CAPACITY IN U.S. GALLONS PER MINUTE
7
IG (4”x 3”) and IG3 (3”x 2-1/2”) Pumps
Model
Number
Replacement Pump
Description
38720 IG 5hp 1 phase
38722 IG 5hp 3 phase
38724 IG 7 1/2 hp 1 phase
38726 IG 7 1/2 hp 3 phase
38730 IG 10 hp 3 phase
38727 IG Pump End / Less Motor
Model
Number
Replacement Pump
Description
38704 IG3 5 hp 1 ph
38706 IG3 5 hp 3 ph
38708 IG3 7 1/2 hp 1 ph
38710 IG3 7 1/2 hp 3 ph
38729 IG3 Pump End / Less Motor
IG and IG3 Replacement Parts
Please Note: Pumps motors are available in straight 200V / 1PH., for an additional charge.
See page 8 for the complete listing of replacement parts.
8
Number Model Number Description
1 38578 Motor, 5 hp, 1 ph
1 38584 Motor, 5 hp, 3 ph
1 38590 Motor, 7 1/2 hp, 1 ph
1 38596 Motor, 7 1/2 hp, 3 ph
1 38606 Motor, 10 hp, 3 ph
2 38556 Motor Bracket, JM small bolt face
(5-HP 3-Phase Only)
2 38546 Motor Bracket, JM, IG/IG3
3 38522 Volute, IG 4” suction, 3” discharge
3 38524 Volute, IG3 3” suction, 2 1/2” discharge
3 38516 Volute Gasket
4 38536 IG Impeller (Need to specify flow rate or trim)
4 38530 IG3 Impeller, 9”
(Need to specify flow rate or trim)
4 38528 Impeller trim and balance
5 38504 Seal Kit, IG
6 29375 Impeller Bolt, ss, IG, 3/8” x 1
6 38518 Impeller Washer, ss, 3/8”
6 38505 Impeller Gasket, IG
7 38502 Shaft Sleeve, All IG / IG3 Pumps
7 38501 Shaft Sleeve Gasket, IG/IG3
7 38507 O-Ring, shaft sleeve, IG/IG3
8 29375 Capscrew, 3/8” x 1” ss
8 29604 3/8” Lock washer ss
9 29380 Capscrew, 1/2” x 1” ss
9 29610 1/2” Lock washer ss
10 14040 Plug, 1/4” brass
11 13950 Air Relief, 1/4” brass
12 14080 Plug, 1/2” brass
IG / IG3 Replacement Parts
9
Push Pull Valves & Replacement Parts
Number Model Number Description
1 39420 4” Push Pull Valve Complete
1 39440 6” Push Pull Valve Complete
1 39460 8” Push Pull Valve Complete
1 39470 10” Push Pull Valve Complete
2 38947 3” Internal Assembly
2 38956 4” Internal Assembly
2 38957 6” Internal Assembly
2 38958 8” Internal Assembly
2 38959 10” Internal Assembly
3 38949 3” Repair Kit, New Style
3 38950 4” Repair Kit, New Style
3 38952 6” Repair Kit, New Style
3 38954 8” Repair Kit, New Style
3 38961 10” Repair Kit, New Style
4 38948 3” Repair Kit, Old Style
4 38951 4” Repair Kit, Old Style
4 38953 6” Repair Kit, Old Style
4 38955 8” Repair Kit, Old Style
5 38469 Pin W/Safety Cable
Vak Pak old style push pull valves used a 3/8”
stainless steel shaft, while the new style valves
use a P.V.C. shaft. Contact Vak Pak for
assistance when converting these valves.
****ALSO NOTE****
Be Sure To Specify When Ordering
Repair Kits
Old Style (S.S. Threaded rod - center shaft)
or
New Style (PVC center shaft)
10
Spin Valves
Part Number Description Ref #
39475 Spin Valve Assembly 10” 1
39485 Spin Valve Assembly 12” 1
82157 Handwheel 2
35756 Shaft Assembly 3
35754 Body Assembly 4
35757 Repair Kit 10” 5
35759 Repair Kit 12” 5
IMPORTANT NOTE: SPIN VALVES ARE INTENDED TO BE USED AS A REPLACEMENT ONLY FOR
VAK PAK SYSTEMS THAT UTILIZE THIS VALVE. VAK PAK, INC. IS NOT
RESPONSIBLE FOR THE FUNCTION OF THESE
VALVES IN ANY OTHER APPLICATION.
11
Part # Description
34364 4” Crank Style Repair Kit
34362 6” Crank Style Repair Kit
34363 8” Crank Style Repair Kit
Valves
Crank Style Valve Repair Kits
See Following Pages for Complete List of Valves Available
12
Valves Cont.
10149 HOSE BIBB, 1/2" MPT BRASS
10160 HOSE BIBB, 3/4" FPT BRASS
10150 HOSE BIBB, 3/4" MPT BRASS
23285 VALVE, BALL PVC 1/2"
23287 VALVE, BALL PVC 3/4"
23290 VALVE, BALL PVC 1"
10299 VALVE, BALL PVC 1-1/4"
10300 VALVE, BALL PVC 1-1/2"
10260 VALVE, BALL PVC 2"
10280 VALVE, BALL PVC 2-1/2"
10285 VALVE, BALL PVC 3"
10287 VALVE, BALL PVC 4"
09907 VALVE, PC 2-WAY 1-1/2"
09909 VALVE, PC 2-WAY 2-1/2"
09908 VALVE, PC 3-WAY 1-1/2"
09910 VALVE, PC 3-WAY 2-1/2"
09912 VALVE, PC 3-WAY 2-1/2 W/1.5 BS
Hose Bibbs
PVC Ball Valves
Praher 2-Way Valves
Praher 3-Way Valves
Pentair 2-Way Valves
263038 263038 VALVE, PF 2-WAY 1.5"
263029 263029 VALVE, PF 2-WAY 2.5"
13
263037 263037 VALVE, PF 3-WAY 1.5"
263028 263028 VALVE, PF 3-WAY 2.5"
09800 1157 VALVE, JANDY 2-WAY 1.5"
09830 2876 VALVE, JANDY 2-WAY 2.5"
09850 1154 VALVE, JANDY 3-WAY 1.5"
09860 2875 VALVE, JANDY 3-WAY 2.5"
09885 4724 VALVE, JANDY 2-WAY 1.5" NEVER
09895 4716 VALVE, JANDY 2-WAY 2.5" NEVER
09890 4715 VALVE, JANDY 3-WAY 1.5" NEVER
09897 4717 VALVE, JANDY 3-WAY 2.5" NEVER
Valves Cont.
Pentair 3-Way Valves
Jandy 2-Way Valves
Jandy 3-Way Valves
Jandy 2-Way Neverlube
Jandy 3-Way Neverlube
263045 ACTUATOR, PENTAIR INTELLITOUCH
Actuators For 2 & 3-Way Valves
14
10512 02582 VALVE, BUTTERFLY 3" PVC AST
10517 02583 VALVE, BUTTERFLY 4" PVC AST
10522 02586 VALVE, BUTTERFLY 6" PVC AST
10527 02587 VALVE, BUTTERFLY 8" PVC AST
LARGER BUTTERFLY VALVES ARE AVAILABLE AS A SPECIAL ORDER
10482 9112S VALVE, CHECK PVC 1" SPRING
10484 9114S VALVE, CHECK PVC 1-1/2" SPRING
10485 9115S VALVE, CHECK PVC 2" SPRING
05340 1520-15 VALVE, CHECK PVC 1-1/2" SWING
05350 1520-20 VALVE, CHECK PVC 2" SWING
05400 1520-30 VALVE, CHECK PVC 3" SWING
05450 1520-40 VALVE, CHECK PVC 4" SWING
05425 1700C30 VALVE, CHECK PVC 3" TU/CL/SP
09900 7235 VALVE, JANDY CHECK 1-1/2"
09905 7305 VALVE, JANDY CHECK 2-1/2"
263042 263042 VALVE, PENTAIR CHECK 2" STRAIGHT
Spring Check Valves PVC
PVC Butterfly Valves
Valves Cont.
Swing Check Valves PVC
True Union Clear Spring Check Valves
Specialty Check Valves
Vak Pak stocks a wide selection of valves.
Can’t find what you’re looking for? Contact our parts dept.
15
FWLC
(Float Water Level Control)
Number Model Number Description
1 38901 1/2” Complete Float Water Level
Control
1 38902 1” Complete Float Water Level
Control
2 39010 24” Float Tee with Balls
2
2
39020
39022
31” Float Tee with Balls
36” Float Tee with Balls
5 39040 10” Float Rod with coupling
6 39060 14” Float Rod with coupling
8 38880 1/2” Guide Tee with Cap
9 37200 Float Ball
10 39500 1” Aluminum float coupling
13 10100 1/2” Valve - only
14 10110 1” Valve - only
If you have any questions about the installation, or set-up of the FWLC, please contact
Technical Support, at our parts department.
16
RWLC
(Reservoir Water Level Control)
Ref.
Number
Model
Number
Description
1 38929 RWLC Float Assembly
1A 38906 Valve, Float Reservoir Assembly
2 38932 1” Diaphragm Valve With Pipe
3 26520 Diaphragm Valve Only 1”
4 38907 Valve, Replacement Reservoir
5 27170 1/4” O.D. Black Tubing
6 13850 1/4” Plastic Sleeve (Not Shown)
*** 38927 RWLC 1” Hydro Assembly Complete (includes reference #’s 1 - 6)
If you have any questions about the installation, or set-up of the RWLC, please contact
Technical Support, at our parts department.
17
Number Model Number Description
1 38929 RWLC Float Assembly
1A 38906 Valve, Float Reservoir Assembly
2 38932 1” Diaphragm Valve With Pipe
3 26520 Diaphragm Valve Only 1”
4 38907 Valve, Replacement Reservoir
5 13850 1/4” Plastic Sleeve
6 27170 1/4” O.D. Black Tubing
*** 38927 RWLC 1” Hydro Assembly
Complete
(includes reference # 1, 2, 5 & 6)
Directions on Setting RWLC
Turn off the circulation pump, fill pool to desired level.
Loosen 1/2” compression nut (B) and slide reservoir up or down until the top rim of the
float chamber is just above the static water level.
Tighten the compression nut until secure.
Open the black diaphragm valve, counter clockwise, at least two (2) turns.
Press down on float ball in the float chamber.
Fresh water should begin to flow into the tank. When the float is released, the water flow
should stop.
RWLC Replacement Parts
18
Ref # Part # Description
1 35750 Element, 100 sq. ft. Dynapure
1A 35751 Element, 150 sq. ft. Dynapure
2 34540 DP, Element Core Holder
3 34340 Base, DP White
4 34490 Dome, DP White
5 34380 O-Ring, Tank Body
6 82167 Air Relief, DP Plastic W/O-ring (NEW STYLE)
6 13950 Brass Air Relief 1/4”
7 34360 Clamp, Dynapure, with Knob
8 34400 Tube, Air Relief DP Acrylic
* 82168 O-Ring Only, Plastic Air Relief
Dynapure Filter Replacement Parts
#6
#5
#4
#8
#2
#7
#3
#1
19
Vak Pak Inc.’s
Dynapure Pool Filter
Dynapure Pool Filters answer the need for low cost,
easy to operate filtration systems for residential and
commercial swimming pools.
Available in 100 & 150 Square Feet
Dynapure 100 & 150 Filter
Specifications:
Filter Model Model # Cartridge Filter
Capacity
Commercial
Flow
Rate
Filter
Area
DP100 34550 100GPM 37.5 GPM 100 SQ. FT.
DP150 34575 100 GPM 56 GPM 150 SQ. FT.
DP 100 DP150
20
D.E. Separation Tanks
Vak Pak 84-S.F. / D.E. Separation Tank
REF # PART # DESCRIPTION
* 34600 SEPARATION TANK COMPLETE
1 34491 DOME, 84SF SEPARATOR TANK
2 82182 BAG, 84SF SEPARATOR TANK
3 82183 INSERT, 84SF SEPARATOR TANK
4 34360 CLAMP, 84SF SEPARATOR TANK
5 34340 BASE, 84SF SEPARATOR TANK
* 34380 O-RING, TANK BODY
* 82167 AIR RELIEF WITH O-RING
* 82168 O-RING ONLY, AIR RELIEF
PARTS FOR OLDER SEPARATION TANKS
* 36015 O-RING, PENTAIR 40’ & 60’ SEP TANK
* 36020 BAG, PENTAIR 40’ SEPARATOR TANK
* 36030 BAG, PENTAIR 60’ SEPARATOR TANK
* 36010 CLAMP, PENTAIR 40’ & 60’ SEP TANK
Vak Pak Inc.
manufactures the
largest capacity
Separation Tank
in the industry.
21
Chlormatic / Bromatic Feeder Parts
Ref. No. Part Number Description
1 34930 Screw Cap
2 33871 O-Ring, Cap
3 20910 Chlorinator Flowmeter. 1/2” MPT
4 03600 Coupling, Threaded 1/2”
5 13830 Adapter, 1/2” Tubing x 1/2” MPT
5 13820 Adapter, 3/8” Tubing x 3/8” MPT
5 13810 Adapter, 3/8” Tubing x 1/4” MPT
6 13765 Tubing, 1/2” O.D. Black (Per Ft.)
6 13762 Tubing, 3/8” O.D. Black (Per Ft.)
7 13665 Valve, Inlet 1/2” FPT
7 10655 Calibrated Inlet Valve, 1/4” MPT x 1/4” FPT
8 05687 Nipple, 1/2” x CLS P.V.C.
9 10650 Valve, Drain 1/4” MPT x Hose Barb
Not Pictured 13655 Tubing, 1/2” O.D. Clear Flexible For Drain Valve ( Per Ft.)
If you are in need of a complete chlorine feeder, please contact us.
We offer erosion feeders from several manufacturers, in varying capacities.
Vak Pak is no longer producing the Chlormatic and Bromatic feeders. Replacement parts are still available.
The picture, (below left), was the latest body style used, and parts are readily
available. If you have any questions, please give us a call.
Please note: Inline check valves have been totally eliminated.
Some parts shown are for earlier models, in which different size tubing
and connections were used.
**
22
Controllers
Model Number Description
82093 Controller, BCES MR-1F CES
19246 Controller, Chemtrol 250
19235 Controller, CAT 2000
Chemical Feeders
Model Number Description
32450 FEEDER STENNER, 45M2
32480 FEEDER STENNER, 45M4
32500 FEEDER STENNER, 45M5
32550 FEEDER STENNER, 85M5
Chlorine And PH Controllers & Feeders
Please Note: Vak Pak has used several different manufacturers of ORP
controllers, and chemical feeders. This represents the most popular models in current
production. Warranty service and parts are generally handled by the manufacturer
direct. However, if you do not see the model of your unit, or if non-warranty
replacement parts are needed, please contact us for assistance.
23
Remote Chemical Crocks
Part # Description
42730 15-Gallon Remote Chemical Crock
42713 30-Gallon Remote Chemical Crock
42714 52-Gallon Remote Chemical Crock
42717 99-Gallon Remote Chemical Crock
Since ORP Controllers and liquid feeders have become more prominent, chemical
storage containers have also become necessary. Vak Pak Manufacturing offers 4
sizes of Remote Chemical Crocks to fit your needs. They come with a lockable lid
for security and may be buried out of the way for convenience.
Please Note: Make sure when ordering to specify chlorine or acid.
24
Vak Pak Inc. Cabinet Listing By Model Number
Model Number Cabinet Number Model Number Cabinet Number
CP6VDE CB402 CS52PCV CB502
Through “ Through “
CP14VDE “ CS100PCV “
AP14VDE CB502 SP140VCT CB602
Through “ Through “
AP22VDE “ SP400VCT “
AP10 CB602 SP500VCT CB1002
Through “
AP30 “ CHR24 CB602
AP32 CB1002 Through “
Through “ CHR36 “
AP40 “ CHR230 CB1002
AP44 CB1402 Through “
AP52 “ CHR236 “
Through “
AP56 “
AP60 “ RDE205 CB202
Through “ Through “
AP80 “ RDE215 “
RDE405 CB402
CS189V CB602 Through “
Through “ RDE415 “
CS540V “ RC205 CB202
CS680V CB1002 Through “
CS52WPCV CB402 RC215 “
Through “ RC405 CB402
CS100WPCV “ RC415 CB402
Vacuum D.E.
Pressure Cartridge
Pressure Cartridge Cont’d
Pressure Sand Filter
Residential
25
Cabinet Parts
Hardware For Old Style Cabinets / Lids
Part Number Description
37100 Roof Jacks, 712 - AA
37170 Safety Cable, For Roof Jack
23700 Hinge, 3”x 3” , S.S. (Sold Each)
27020 Hardware Kit, 3”x 3” Hinges (Per hinge)
27015 Hardware Kit, For Roof Jacks (Per Roof Jack)
Hardware For New Style Cabinets / Lids
Part Number Description
37130 100-lb Hydraulic Lifters (Used Primarily on Subterranean Vaults)
37125 90-lb Hydraulic Lifters
37120 60-lb Hydraulic Lifters
37110 30-lb Hydraulic Lifters
23730 Latch Assembly Complete
23702 Hinge, 3”x 3” S.S. Heavy Duty (Sold Each)
38913 Mounting Bracket W/Ball Stud
37111 Clip Retainer, For Ball Stud
27020 Hardware Kit, 3”x 3” Hinges (Per Hinge)
37118 Hardware Kit (30-90-LB Per Roof Jack)
37119 Hardware Kit (100-LB Per Roof Jack)
Part Number Description
37050 Grille, 10”x 10”
37000 Grille, 24”x 10”
Grilles
26
Cabinet and Lid Part Numbers
New Style Cabinets “02” Series
Cabinet Model
Number
Cabinet Part
Number
Lid Part Number Hydraulic Lifter
Part Number
CB104 41240 41280 37100
CB202 41385 41422 37110
CB402 40465 40375 37120
CB502 45523 40382 37120
CB602 40342 40375 37120
CB1002 40850 40890 37125
CB1402
40843 40375
40890
37125
37120
CB1702
40844 40375
40890
37125
37120
Old Style Cabinets “00” Series
Cabinet Model
Number
Cabinet Part
Number
Lid Part Number Roof Jack Part
Number
CB104 41240 41280 37100
CB200 USE CB202 41420 37100
FILTERPAK 41890 41920 37100
CB400 USE CB402 40380 37100
CB600 USE CB602 40380 37100
CB1000 USE CB1002 40880 37100
27
CB1702
Cabinet Specifications
(Requires 90 & 60-LB Roof Jacks. See Pages 25-26 For Parts)
201”
39
..5”
79”
28
CB1402
Cabinet Specifications
(Requires 90 & 60LB Roof Jacks. See Pages 25-26 For Parts)
76” 79”
161”
39
.5”
39
.5”
29
CB1002
Cabinet Specifications
(Requires 90-LB Roof Jacks. See Pages 25-26 For Parts)
30
CB1000 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
31
CB602
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
32
CB600 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
33
CB502
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
34
Filterpak
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
Please Note: This Cabinet Is No Longer Used in Current Production,
However, Parts Are Still Readily Available.
35
CB402
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
36
CB400 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
37
CB104
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
CB200 (Old Style)
Cabinet Specifications (Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
38
CB202
Cabinet Specifications
(Requires 30-LB Roof Jacks. See Pages 25-26 For Parts)
LOCKABLE
ACCESS
Low Profile Collector Tank Lid Specifications
Fits: CT120LP / CT140LP / CT200LP / CT300LP
39
CT-60
Cabinet Specifications Order Part # 45013
COLLECTOR TANK
SKIRT
Set your collector tank to proper static water level, regardless of grade. The
skirt can be custom made to your height specs,
from 3” to 24”. It can also be ordered later and easily installed in the
field at any time.
Order part # 41423, and specify your height
requirements.
Cabinet Identification Vak Pak changed cabinet styles in 2002. All new style cabinet designations end in “02”,
(E.G. CB402 / CB602 Etc.). The drawings below show the difference in the new style “02”
lids, and the old style designated as “00” lids or cabinets, (E.G. CB400 / CB600 Etc.).
40
Since the early 1970’s, Vak Pak Inc. has been manufacturing quality
fiberglass, sand coated main drain forming shells for commercial and
residential use. Our easy to use, VGB compliant product is available in many
standard sizes and configurations, as well as custom designs, made to your
specifications. Drains can be made with either slip, or threaded fittings.
We stock many VGB frame & grates to fit not only our drains, but the
majority of the main drains you are using. Our main drains are available in
beige or black. If you have any questions, or would like to place an order,
please contact our parts department for assistance.
Main Drains - VGB Compliant
CMD 9/3/2 Main Drain - VGB Compliant
PART # DESCRIPTION
42340 CMD MAIN DRAIN, 9/3/2
42360 CMD MAIN DRAIN, 9/3/3/2
41
Main Drains - VGB Compliant, Contd.
CMD 12/4/2 Main Drain - VGB Compliant
PART # DESCRIPTION
42380 CMD MAIN DRAIN, 12/4/2
42400 CMD MAIN DRAIN, 12/4/4/2
CMD 12/6/2 Main Drain - VGB Compliant
PART # DESCRIPTION
42421 CMD MAIN DRAIN, 12/6/2
42
Main Drains - VGB Compliant, Contd.
CMD 18/8/2+2 Main Drain - VGB Compliant
18-1/2”
23”
13”
17”
25”
Over the years we have received many questions concerning the use of a square frame & grate on
a round main drain. As you can see below, examples 1 & 3, show a perfectly straight, plumbed
suction line. Examples 2 & 4, however, show us the all to familiar, slightly offset plumbing line.
With the round main drain, example 2, you can easily adjust the frame & grate, and remain
square to the overall layout of the pool. With a square main drain, as example 4 shows, the frame
& grate has little, or no adjustment. ( Exaggerated drawing for illustration only)
Parallel to pool wall.
PART # DESCRIPTION
42460 CMD MAIN DRAIN, 18/8/2+2
43
Main Drain Identification
Vak Pak Manufacturing produces many different types of VGB compliant main
drains, from our standard products, usually in stock and ready for immediate
shipment, to custom main drains, built to your specifications. In order to make it
easier for you to order and receive exactly what you need, we would like to explain
our model number designations. There are three basic size main drains, 9”, 12”,
and 18”. When ordering, the first number is the size of the drain, (E.G. 12/), for a
12” drain. The second number indicates the side outlet, (E.G. 12/4), which is a 4”
fitting. The third number indicates the bottom outlet fitting, (E.G. 12/4/2), which is
2”. The exceptions to this being if 2 outlets are required on the side of the drain,
this number would read, 12/4/4/2, and if there are more than one bottom fitting, it
would read, 12/4/4/2+2. We have put together several examples of standard and
also custom main drains below.
As you can see, the model number designations are fairly
simple. Main drain size, side outlet, and bottom port. These are
just a few of the possibilities for customized drains. Also
remember, any of these drains can be made with couplings,
(all slip), or female adapters, (slip x thrd), or in any
combination of the two. If you have any questions, need a quote
on a custom design, or are ready to order, simply contact our
parts department for assistance.
44
VGB Compliant Grates and Unblockable Drains
Vak Pak Builders Supply has you “covered” when it comes to VGB
approved main drain covers and unblockable drains. With
manufacturers like Waterway, A & A Manufacturing, Aquastar,
and Custom Molded Products, we have what you need.
We stock everything from the 8” residential drains & grates, up to 18”x 18”.
24”x 24” grates are available on a special order basis.
45
Prices are subject to change without notice unless a quote has been made. Quotes from the Builder
Supply Store are good for 90 days. All prices are F.O.B. our warehouse and custom orders are F.O.B.
point of origin. Prices are subject to applicable sales and/or use taxes unless customer has on file
with Vak Pak, and up to date tax exemption certificate.
Customers, with approved open accounts, may take a 1.5% discount if paid by the 10th. of the month,
following invoice date. A 1.5% service charge per month or portion thereof on all past due accounts. Past
due status will cause delivery of shipment to be withheld on any new or outstanding orders.
All parts orders MUST be prepaid, either with a credit card, or check in advance,
if you do not have an established account with Vak Pak. We do not ship C.O.D.
Seller’s responsibility ceases when merchandise is turned over to a common carrier. Damages or
shortages must be reported to delivery carrier immediately upon receipt and so noted on Bill of Lading
before acceptance of shipment is made. Otherwise, no claim can be enforced against
the Deliverer, Carrier, or the Seller.
All shortage claims must be reported within 48 hours.
Merchandise MAY NOT BE returned without prior authorization. Merchandise returned is subject to
inspection and a 15% restocking charge, providing the returned merchandise is in original condition.
Special freight charge may apply.
Equipment or accessories not manufactured by Vak Pak will carry only warranty furnished by the
manufacturer. Vak Pak will act as an agent for purchasers to obtain warranty from said manufacturer,
but Vak Pak will not warranty or be held liable for said products warranty. Equipment or accessories
manufactured by Vak Pak carry a 12 month warranty from date of shipment.
Terms and Conditions
Pricing
Terms
Damaged or Shortage Claims
Returned Merchandise
Warranty
46
INDIAN RIVER PLACE
THE FIRST VAK PAK EVER SOLD.
The first Vak Pak ever sold was installed in 1970, by
Vero Beach Pools. As of December, 2013, it was still in
operation. We are trying to put together data on the
average life of a Vak Pak, but after 40 years, and the
first unit is still going strong, it may take us a while.