um_ran-02_bsc-21 zxg10 ibsc (v6.20.20) radio parameter reference v1.0
DESCRIPTION
ZTE Radio parametrsTRANSCRIPT
-
ZXG10 iBSCBase Station Controller
Radio Parameter Reference
Version 6.20.20
ZTE CORPORATIONNO. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: (86) 755 26771900Fax: (86) 755 26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]
-
LEGAL INFORMATION
Copyright 2010 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution ofthis document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPO-RATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATIONor of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are dis-claimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-in-fringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on theinformation contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subjectmatter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No. Revision Date Revision Reason
R1.0 20100228 First edition
Serial Number: SJ-20100203092418-017
-
Contents
Preface.............................................................. I
Overview...........................................................1Introduction to BSS Radio Parameters ............................... 1
Methods to Modify Radio Parameters ................................. 2
The Format to Explain Parameters .................................... 6
Precautions on Parameter Adjustment ............................... 7
BSC Function Parameters ..................................9Radio Basic Property Parameters ...................................... 9
DCS1800/PCS1900 Supported (FuncExt) ......................10
Load indication allowed (LoadInd)................................11
Send confusion message allowed (ConfusionMsg) ..........11
Inter-Cell handover allowed (InHoEnable) .....................12
Send assignment failure allowed (ExDRSendAss-
Fail).................................................................13
Load indication valid time (LoadValidTime)....................14
Load indication period (LoadIndPrd) .............................14
Automatic resource indication threshold (Resour-
ceIndThs).........................................................15
Resource adjust threshold (ResourceAdjustThs) .............17
BSC MAX reset number (BSCMaxResetNum) .................17
MR report enable (MrRptEnable) ..................................18
HBTS scan site number (HBTSScanSiteNum) .................19
Range of BARANG......................................................20
Other Parameters ..........................................................20
Length of super vision (LcsSuperVision)........................21
Length of radio (LcsRadio) ..........................................22
LCS wait intra BSS handover timer (LcsWaitIn-
TraHO) .............................................................23
Monitor physical context request (RmsT9108,
100ms) ............................................................23
Timer for MSG waiting (TWaitMsg, 100ms)....................24
Confidential and Proprietary Information of ZTE CORPORATION I
-
ZXG10 iBSC Radio Parameter Reference
Timer for RANCSEST Waiting (TWaitRancsEst,
100ms) ............................................................25
Timer for RANCSCLECOM Waiting (TWaitRancsCleCom,
100ms) ............................................................26
Timer for CCM waiting (CcmWaitTimer) ........................26
Get static param timer (GetStaticParamTimer,
100ms) ............................................................27
Starting time for oriented retry (RmsT10, 100ms)..........28
TFO Enable (TFOControl_0).........................................28
Coding/decoding type optimization enable
(TFOControl_1) .................................................29
Coding/decoding type unmatched enable
(TFOControl_2) .................................................30
AMR Optimization Mode (TFOControl_3) .......................31
External cell load notify (Info_0_0) ..............................31
Neighbor cell load valid duration (Info_0_1,10s) ............32
LMU build request deal or not (Info_1_0)......................33
MBMS request deal or not (Info_1_1)...........................33
Channel request reserved field deal or not
(Info_1_2)........................................................34
MS power hold in handover option (Info_0_9) ...............34
Level threshold of target cell (Info_0_10) .....................35
Channel Allocation Control Parameters .............................36
Dynamic HR enable (DynaHREnable)............................37
Threshold for TRX switched from FR to HR (HRThs) .........37
AMR Dynamic HR Conversion Threshold
(AmrHRThs)......................................................38
Support HR channel frag finishing (HRDfragSup-
port)................................................................39
HR channel percentage threshold (HRTsPercent-
age) ................................................................40
User priority for EMLPP (PriThreshold) ..........................40
Preferred speech version (PreferSpeechVer H) ...............41
Preferred speech version (PreferSpeedchVer F)..............42
Reserved Channel First (RsvChanFirst) .........................43
EMLPP channel Reserved time (EMLPPThs, %) ...............43
TRX PS busy threshold (TrxPSBusyThs) ........................44
Resource pool for PS rate (PsAbisThs, %) .....................45
Maximum PS uplink user per ts (MaxPsUser-
PerTs_0)...........................................................46
II Confidential and Proprietary Information of ZTE CORPORATION
-
Maximum PS downlink user per ts (MaxPsUser-
PerTs_1)...........................................................46
Support extended uplink dynamic allocation
(ExUpDynSupport).............................................47
Timer 1 Parameters .......................................................48
Blocking/unblocking period (T1, 100ms) .......................48
Global Resetting Period (T4, 100ms) ............................49
Protection period for global resetting (T13, 100ms) .........50
Circuit resetting period on BSS side (T19, 100ms) .........50
Circuit group blocking/unblocking Period (T20,
100ms) ............................................................51
RLSD message receive protection timer (T9101,
100ms) ............................................................52
Channel activation protection timer (rmsT9103,
100ms) ............................................................53
MSC clear command protection timer (T9104,
100ms) ............................................................54
SCCP connection protection timer (T9105, 100ms) .........54
Protective time waiting for access (RmsT1, 100ms) .........55
Protective time for applying to channel (RmsT2,
100ms) ............................................................56
Protective time for link establishment response
(RmsT3, 100ms) ...............................................57
Protective time for P0 confirms the message HO/ASS
COM (RmsT4, 100ms) ........................................58
Encryption mode modification time (RmsT5,
100ms) ............................................................59
SAPI3 link establishment time (RmsT6, 100ms).............59
External handover protective time (RmsT8,
100ms) ............................................................60
Protective time for No7 signal instantaneous
disconnection (T3, 100ms)..................................61
Protective time that PO responses external handover
completion message (RmsT7, 100ms) ..................62
HBTS scan begin time (HBTSScanBT) ...........................63
HBTS scan cycle (HBTSScanCyc, 3600s) .......................63
Timer 2 Parameters .......................................................64
Protective time for RF channel release (RmsT9,
100ms) ............................................................64
Queue period of assignment (RmsT11, 100ms)..............65
Confidential and Proprietary Information of ZTE CORPORATION III
-
ZXG10 iBSC Radio Parameter Reference
Acknowledgment interval for periodic status (RmsT12,
100ms) ............................................................66
Mode modification process time (RmsT13, 100ms) .........67
Protective time of UM assignment completion (RmsT14,
100ms) ............................................................68
Waiting time for oriented retry (RmsT16, 100ms) ..........68
Queue timer for handover (RmsTqho, 100ms) ...............69
First Overload Period of Flow Traffic Control (rmT11,
100ms) ............................................................70
Second Overload Period of Flow Traffic Control (mT12,
100ms) ............................................................71
Time of Micro-Micro handover delay (Tmicro,
100ms) ............................................................72
BSIC decoding period (Tbsic, 100ms) ...........................72
Handover protecting timer to WCDMA/FDD (RmsT3121,
100ms) ............................................................73
Immediate assignment period (RmsT3101,
100ms) ............................................................74
Handover period of source cell (RmsT3103,
100ms) ............................................................75
Assignment period (RmsT3107, 100ms) .......................76
Channel release period (RmsT3109, 100ms) .................76
Channel deactivation delay (RmsT3111, 100ms) ............77
Continue Timer for mode modify (TModeModifyConn,
100ms) ............................................................78
Handover protecting time to UTRAN (mT7, 100ms) .........79
Time of destination instance waiting for available
resources when forced disconnection (RmsT15,
100ms) ............................................................80
Protecting time of FUC response to system message
broadcast (BcProtect, 100ms) .............................80
HO performed ack timer (TwaitHoPFMAck, 100ms) .........81
GPRS Max Retrying Times Parameters ..............................82
MAX times of BVC block retry (BVCBlkMax)...................83
MAX times of BVC unblock retry (BVCUnblkMax)............84
MAX times of BVC reset retry (BVCRestMax) .................85
MAX times of NS block retry (NSBlkMax) ......................86
MAX times of NS unblock retry (NSUnblkMax) ...............87
MAX times of NS alive retry (NSAliveMax).....................87
MAX times of suspend retry (SuspendMax) ...................88
IV Confidential and Proprietary Information of ZTE CORPORATION
-
MAX times of resume retry (ResumeMax) .....................89
MAX times of radio access capabilities update retry
(UpdateMax).....................................................90
MAX times of PFC create retry (DownLoadBssPFC-
Max)................................................................91
MAX times of PFC modify retry (ModifyBssPFCMax) .........92
GPRS Timer Parameters .................................................93
BVC block/unblock retry time (BssgpT1, 100ms)............93
BVC reset retry time (BssgpT2, 100ms)........................94
Suspend retry time (BssgpT3, 100ms)..........................95
Resume retry time (BssgpT4, 100ms) ..........................96
Access capability update retry time (BssgpT5,
100ms) ............................................................97
PFC creating retry time (BssgpT6, 100ms) ....................97
PFC modifying retry time (BssgpT8, 100ms)..................98
RIR Timer (TRIR, 100ms) ...........................................99
RI Timer (TRI, 100ms) ............................................. 100
RIAE Timer (RIAE, 100ms)........................................ 101
BVC flow control period (CellFcPer, 10ms) ................... 101
MS flow control period (MsFcPer, 10ms)...................... 102
Timer that monitors the block/unblock procedure
(NS_T1, s)...................................................... 103
Timer that monitors reset procedure (NS_T2, s) .......... 104
NC-Cycle of NS-VC test process (NS_T3, s)................. 105
Timer that monitors alive process of NSVC (NS_T4,
s) .................................................................. 106
MAX attempt period of reset (NS_T5, s) ..................... 107
TFI and USF release timer (T3169, 10ms)................... 107
TBF release timer (T3191, 10ms)............................... 108
TBF release time of downlink transmission (T3193,
10ms)............................................................ 109
TBF protect time when radio link failure (T3195,
10ms)............................................................ 110
PS channel delay release timer (PSRelDelay,
100ms) .......................................................... 111
AMR Half Method Parameters ........................................ 112
AMR Half Active Codec Set (AmrHalfAcs) .................... 112
Thresholds of AMR (AmrThresholds)........................... 113
Hysteresis of AMR (AmrHysteresis) ............................ 114
Initial codec mode (IsAmrICM) .................................. 115
Confidential and Proprietary Information of ZTE CORPORATION V
-
ZXG10 iBSC Radio Parameter Reference
Start mode (AmrStartMode)...................................... 116
Enable noise control (IsAmrNscb) .............................. 117
AMR Full Method Parameters ......................................... 118
AMR Full Active Codec Set (ArmFullAcs)...................... 118
Threshold of AMR (AmrThresholds) ............................ 119
Hysteresis of AMR (AmrHysteresis) ............................ 120
Initial codec mode (IsAmrlCM) .................................. 121
Start mode (AmrStartMode)...................................... 122
Enable noise control (IsAmrNscb) .............................. 123
GPRS Property 1 Parameters ......................................... 123
Cn......................................................................... 124
Nn......................................................................... 125
Xn (%)................................................................... 126
MAX allowed number of continuous losses of uplink
data blocks (N3101) ........................................ 127
Times of packet uplink ACK/NACK retries (N3103) ......... 128
MAX allowed number of continuous losses of uplink
RLC/MAC control message (N3105).................... 129
GPRS Property 2 Parameters ......................................... 130
NACC supported (NACCSupport)................................ 130
LLC frame rerouting (LLCTransupport) ........................ 131
BSC's net operation mode (NMO)............................... 132
BSC support page coordination (PagCoordination) ......... 133
Satellite transmission at Gb interface indication
(IsSatelliteGB) ................................................ 133
Extended RLC send window allowed (IsWindowEx-
pend)............................................................. 134
Support TBF establish (TBF_EST)............................... 135
Support signal extended uplink TBF (Signal_EU-
TBF) .............................................................. 135
Highest coding scheme of signal TBF (SigTBFMax-
Code) ............................................................ 136
Optimized PoC service support (PocSupport) ............... 137
Highest coding scheme of PoC service in GPRS
(PocAttSelt_0)................................................. 137
Highest coding scheme of PoC service in EGPRS
(PocAttSelt_1)................................................. 138
Maximal users of PoC service on shared PS channel 0
(PSCapaThs_UL).............................................. 139
VI Confidential and Proprietary Information of ZTE CORPORATION
-
Maximal users of PoC service on shared PS channel 1
(PSCapaThs_DL) ............................................. 140
BVC Flow Control Parameters ........................................ 140
BVC flow control supported (BVCFlowCtrl)................... 141
MS flow control supported (MSFlowCtrl)...................... 142
Flow control mode (FlowCtrlMode) ............................. 143
Parameter of flow control mode1 (FlowC-
trlMode1Para) ................................................. 144
Parameter of flow control mode2 (FlowC-
trlMode2Para) ................................................. 144
BVC flow control R MIN value (BVCFlowCtrlRMin,
100bps) ......................................................... 145
MS flow control R MIN value (MSFlowCtrlRMin,
100bps) ......................................................... 146
FUC Flow Control Map Parameters.................................. 147
Flow Control Reason ................................................ 147
Emergency Call ....................................................... 148
Call Rebuilt ............................................................. 148
Call Response ......................................................... 149
Calling ................................................................... 150
Location Update ...................................................... 150
GPRS Access........................................................... 151
Restore .................................................................. 152
Flow control map slim adjust (bit).............................. 152
EDGE Property Parameters............................................ 153
Support PFC (PFC Support) ....................................... 154
R99 Ind (R99Ind) .................................................... 154
RS......................................................................... 155
RR......................................................................... 156
RA......................................................................... 156
RM ........................................................................ 157
RB......................................................................... 158
RG......................................................................... 158
RE......................................................................... 159
IP Property Parameters ................................................ 160
Begin NSVC of IPGB (IPGBStartNSVC)........................ 160
SNS add retries (SNSAddMax)................................... 161
SGSN config retries (SNSConfigMax) .......................... 162
SNS change weights retries (SNSChgWeightMax) ......... 162
SNS delete retries (SNSDelMax) ................................ 163
Confidential and Proprietary Information of ZTE CORPORATION VII
-
ZXG10 iBSC Radio Parameter Reference
SNS size retries (SNSSizeMax) .................................. 164
TSNS PROV (SNS_T1, 100ms)................................... 164
IP packet reassembly unit (IPPktRsmUnit) .................. 165
Abis CS (IPTOS_0)................................................... 166
ABIS PS (IPTOS_1).................................................. 167
A CS (IPTOS_2) ...................................................... 167
IPOE CS (IPTOS_3).................................................. 168
IPOE PS (IPTOS_4) .................................................. 169
IPOE SCTP (IPTOS_5) .............................................. 169
IPGb Conversation TOS (IPTOS_6)............................. 170
IPGb Streaming TOS (IPTOS_7)................................. 171
IPGb Interactive TOS (IPTOS_8) ................................ 172
IPGb background TOS (IPTOS_9)............................... 172
IPGb TOS (IPTOS_10) .............................................. 173
DSCP Field of SCTP Packet (Info3) ............................. 174
IPABIS (VirtuallP_0)................................................. 174
OMCB channel IP (VirtuallP_1) .................................. 175
eMLPP Set .................................................................. 176
Strategy for preemption when assign (AssPreempt-
strategy) ........................................................ 176
Strategy for preemption when handover
(HoPreemptstrategy) ....................................... 177
Maximum forced handover times when assign
(AssForcedHoTry) ............................................ 178
Maximum forced handover times when handover
(HoForcedHoTry) ............................................. 178
Maximum forced release times when assign
(AssForcedRelTry)............................................ 179
Maximum forced release times when handover
(HoForcedRelTry)............................................. 180
Preemption duration when assign (AssPreempTimer,
100ms) .......................................................... 181
Preemption duration when handover (HoPreempTimer,
100ms) .......................................................... 181
Timer for start forced release when assign
(AssForceRelTimer).......................................... 182
Timer for start forced release when handover
(HoForceRelTimer)........................................... 183
Interval for search forced handover target when assign
(AssForceHoInterval, 100ms) ............................ 183
VIII Confidential and Proprietary Information of ZTE CORPORATION
-
Interval for search forced handover target when
handover (HoForceHoInterval, 100ms) ............... 184
Interval for search forced release target when assign
(AssForceRelInterval, 100ms)............................ 185
Interval for search forced release target when handover
(HoForceRelInterval, 100ms)............................. 186
Queue timer for assign (rmsT11, 100ms).................... 186
Queue timer for handover (RmsTqho, 100ms) ............. 187
Queue indicate when assign (QueueIndAss) ................ 188
Queue allowed when handover (QueueIndHo) ............. 189
Forced release indicate when assign (PreemptionIn-
dAss) ............................................................. 189
Forced release allowed when handover (Preemp-
tionIndHo)...................................................... 190
Forced handover indication for assign (ForcedHol-
ndAss) ........................................................... 191
Forced handover indication for handover
(ForcedHolndHo) ............................................. 191
Wait resource timer after forced handover .................. 192
Wait resource timer after forced release ..................... 193
Enough low priority for preemption (LowestPrior-
ity) ................................................................ 194
Enough call duration for preemption (LongCallDura-
tion) .............................................................. 194
Forced handover target penalty time (Force-
HoPenalty)...................................................... 195
Priority of emergency service (EmergServicelPrio) ......... 196
Ater Timer parameters ................................................. 196
Ater wait SCCP connection timer (TAterWaitConn,
100ms) .......................................................... 197
Ater wait resource timer (TWaitAterRes, 100ms).......... 198
Ater wait resource release timer (TAterWaitRel,
100ms) .......................................................... 198
Ater handover monitor timer (TAterMoniterHO,
100ms) .......................................................... 199
Ater wait resource acknowledge timer (TWaitAterRe-
sAck, 100ms).................................................. 200
Ater block circuit timer (TAterCicBlk, 100ms)............... 200
Ater wait resource timer (TAterBlkCicGrp, 100ms) ......... 201
Ater reset circuit timer (TAterRstCic, 100ms)............... 202
Confidential and Proprietary Information of ZTE CORPORATION IX
-
ZXG10 iBSC Radio Parameter Reference
Ater reset timer (TAterRst, 100ms) ............................ 202
Ater reset guard timer (TITCRst, 100ms) .................... 203
Ater reset timer (TBIkACic, 100ms) ........................... 204
Ater reset guard timer (TBIkACicGrp, 100ms).............. 204
External Cell Parameters...............................207GERAN External Cell Parameters.................................... 207
External cell ID ....................................................... 208
Cell type (CellType).................................................. 209
MCC (MCC)............................................................. 209
MNC (MNC)............................................................. 210
Frequency band (FreqBand) ...................................... 211
BCCH frequency (BcchArfcn) ..................................... 211
Location Area Code (LAC) ......................................... 212
CI (CI) ................................................................... 213
NCC (NCC) ............................................................. 213
BCC (BCC).............................................................. 214
GPRS service supported (PsSupport) .......................... 215
Reselection offset (ReselOff_0) .................................. 216
Reselection offset (ReselOff_1) .................................. 217
Reselection temporary offset (TempOffset_0, dB) ......... 218
Reselection temporary offset (TempOffset_1, dB) ......... 219
Penalty time of cell reselection (PenalTime_0,
10s) .............................................................. 219
Penalty time of cell reselection (PenalTime_1,
10s) .............................................................. 220
HSC exist (HCS_EXIST_0) ........................................ 221
HSC Exist (HCS_EXIST_1) ........................................ 222
Threshold of HSC signal level (HCS_THR_0) ................ 223
Threshold of HSC signal level (HCS_THR_1) ................ 223
HCS priority (PrioClass_0) ........................................ 224
HCS priority (PrioClass_1) ........................................ 225
Allow SOLSA MS to access (EXC_ACC)........................ 226
Cell reselection status (CellBarAc2) ............................ 226
LSA ID (LSA_Id)...................................................... 227
RAC....................................................................... 228
GPRS access minimum signal level (RxLevAs-
Min_0) ........................................................... 229
GPRS access minimum signal level (RxLevAs-
Min_1) ........................................................... 230
X Confidential and Proprietary Information of ZTE CORPORATION
-
GPRS MAX initial access signal level (MsTxMax-
CCH_0) .......................................................... 231
GPRS MAX initial access signal level (MsTxMax-
CCH_1) .......................................................... 232
UTRAN External Cell Parameters .................................... 233
External UTRAN ID (Ec3GID)..................................... 234
UTRAN cell type (CellType3G).................................... 235
MCC (MCC)............................................................. 236
MNC (MNC)............................................................. 236
UTRAN cell Frequency (Arfcn3G)................................ 237
Location Area Code (LAC) ......................................... 238
RNC ID (RNC_ID) .................................................... 239
C ID (C_ID) ............................................................ 239
Scrambling code or Cell Parameter (ScCodeCell-
Para) ............................................................. 240
TX diversity indication (DiverSity) .............................. 241
RAC....................................................................... 242
UTRAN adjacent cell bandwidth (BandWidth3G) ........... 242
Apply Sync Case (SyncCaseTSTD).............................. 243
Cell Parameters.............................................245Basic Params 1............................................................ 245
BTS ID (BtsId) ........................................................ 246
Cell type (CellType).................................................. 247
MCC (MCC)............................................................. 247
MNC (MNC)............................................................. 248
Location Area Code (LAC) ......................................... 249
CI (CI) ................................................................... 249
NCC (NCC) ............................................................. 250
BCC (BCC).............................................................. 251
Frequency band (FreqBand) ...................................... 252
Subcell used (SubCellUsed)....................................... 252
Frequency band of subCell (SubFreqBand) .................. 253
ARFCN list (CaArfcnList) ........................................... 254
GPRS service supported (PsSupport) .......................... 255
Dynamic HR enable (DynaHREnable).......................... 255
Use cell dynamic HR parameter (UseCell-
DynHRPara) .................................................... 256
CBC supported (SmsCbUsed) .................................... 257
Threshold for a single trx switched from FR to HR
(HRThs, %) .................................................... 258
Confidential and Proprietary Information of ZTE CORPORATION XI
-
ZXG10 iBSC Radio Parameter Reference
PS busy threshold (Info_1_16) .................................. 258
Use cell dynamic AMR parameter (UseCellAMR-
Param)........................................................... 259
Common control channel configuration
(CcchConf) ..................................................... 260
Template file ........................................................... 261
Basic Params 2............................................................ 262
TA MAX (TaMax) ...................................................... 262
TA MIN (TaMin) ....................................................... 263
TA allowed (TaAllowed)............................................. 264
CCCH load indication period (CcchLoadIndPrd, s) ......... 265
Periodical location updating timer (T3212, 360s).......... 265
Protection period for access attempt (T3122, s) ........... 266
Multiband report indication (MulbandReport) ............... 267
Minimal level threshold of MS uplink RACH access
(RachAccessMin, -db)....................................... 269
CCCH load indication (RACH) (Cc-
chLoadINDThs_0) ............................................ 270
CCCH load indication (PAGCH) (Cc-
chLoadINDThs_1) ............................................ 270
8PSK modulating power attenuation level
(Tn7Lowerlevel, 0.2db) .................................... 271
Support Repeated ACCH (RepeatACCH) ...................... 272
Start PA Power Off (StartPAPowerOff)......................... 272
Switch Flag of Ceil TRX Power Off (StartTRX-
PowerOff)....................................................... 273
Bss Radio Link Timer's Max Value for AMR HR Bug
(BsRadioLkTmOutAMRFR) ................................. 274
Bss Radio Link Timer's Max Value for AMR HR Bug
(BsRadioLkTmOutAMRHR)................................. 275
AMR Codec Adjust Mode (AmrAdjMode) ...................... 275
AMR Codec adjust interval (AmrAdjInterval,
480ms) .......................................................... 276
Support HR channel frag collected (HRDfragSup-
port).............................................................. 277
Threshold of HR Defrag (HRDefragThs)....................... 278
Percentage of HR Ts (HRTsPercentage) ....................... 278
AMR Dynamic HR Conversion Threshold
(AmrHRThs).................................................... 279
XII Confidential and Proprietary Information of ZTE CORPORATION
-
FR-HR HandOver Based On Cell Load (FRThrHoSup-
port).............................................................. 280
Start PA Output Voltage Tuning (Info_0_0) ................. 281
NCC permitted (NccPermitted)................................... 281
Basic Params 3............................................................ 282
Average bursts count surveyed by RACH
(AvgSlots) ...................................................... 283
RACH Receiving signal level threshold for busy burst
(RachBuysThs) ................................................ 283
Overload sending period (OverloadPrd, s) ................... 284
BA Show (BcchBaInd) .............................................. 285
MIN received signal level to access (RxLevAccess-
Min)............................................................... 286
MAX number of re-transmitting events times
(MRetrans) ..................................................... 287
Number of slots to spread transmission
(TxInteger)..................................................... 289
Control channel MAX power level (MsTxPwrMax-
Cch) .............................................................. 290
Number of multiframes of the PCH (BsPaMframe) ......... 291
Interval of SDCCH re-sending phy info message
(T3105d, 10ms) .............................................. 292
Interval of TCH re-sending PHY INFO message (T3105f,
10ms)............................................................ 293
MAX resending times for physical information
(NY1)............................................................. 294
Number of blocks reserved for AGCH (BsAg-
BlkRes) .......................................................... 295
Lapdm Timer for controlling sdcch channel (T200_0,
5ms).............................................................. 295
Lapdm Timer for controlling facch/full rate channel
(T200_1, 5ms)................................................ 296
Lapdm Timer for controlling facch/half rate channel
(T200_2, 5ms)................................................ 297
Lapdm Timer for controlling sacch with tch sapi0
channel (T200_3, 10ms) .................................. 297
Lapdm Timer for controlling sacch with sdcch channel
(T200_4, 10ms) .............................................. 298
Lapdm Timer for controlling sdcch sapi3 channel
(T200_5, 5ms)................................................ 299
Confidential and Proprietary Information of ZTE CORPORATION XIII
-
ZXG10 iBSC Radio Parameter Reference
Lapdm Timer for controlling sacch with tch sapi3
channel (T200_6, 10ms) .................................. 299
Optional Parameters .................................................... 300
Early category classmark sending control (ECSC) ......... 301
IMSI attach/detach allowed (ImsIadAllowed)............... 302
Cell bar access (CellBarAccess).................................. 303
Call re-establishment allowed (CallReestablish)............ 303
Downlink discontinuous transmission allowed
(DtxDwlink) .................................................... 304
Uplink discontinuous transmission (DtxU-
plinkBcch) ...................................................... 305
Emergency call allowed (EmergencyCall) .................... 306
Cell bar qualify (CellBarQualify) ................................. 307
Access control (AccessControl) .................................. 308
HBTS preofread support (HBTSScanSupport)............... 310
RSSI threshold (RSSlThrd)........................................ 310
Preofread freqband type (GSM1900Support) ............... 311
Range of HBTS BARANG ........................................... 312
Cell Selection Parameters ............................................. 312
Additional reselection parameter indication
(AdditionReselPI)............................................. 313
Cell reselection parameter indication (CellRe-
selPI)............................................................. 314
Reselection offset (ReselOffset) ................................. 315
Temporary offset (TemporaryOffset, 10dB).................. 317
Penalty time (PenaltyTime, 20s) ................................ 318
Cell reselecting hysteresis level (ReselHysteresis,
2dB) .............................................................. 319
New setup cause indication (NECI)............................. 320
Power offset indication (PowerOffsetInd)..................... 321
Power offset (PowerOffset, 2dB) ................................ 321
Service Process Additional Parameters............................ 322
Directed retry indication (DrInd_0) ............................ 323
Inter Directed retry indication (DrInd_1) .................... 324
Queue allowed when assign (QueueInd_0).................. 325
Queue allowed when handover (QueueInd_1).............. 325
Preemption allowed when assign (Preemp-
tionInd_0) ...................................................... 326
Preemption allowed when handover (Preemp-
tionInd_1) ...................................................... 327
XIV Confidential and Proprietary Information of ZTE CORPORATION
-
When assigned forced handover (ForcedHoInd_0) ......... 328
When handover forced handover (Forced-
HoInd_1)........................................................ 328
NO. of candidate cells for handover (Candidate-
Num)............................................................. 329
Fast average indication (FastAvg)............................... 330
BCCH switch allowed (CanBcchExch) .......................... 331
SDCCH dynamic configuration allowed (CanSdcch-
Dyn) .............................................................. 331
Minimal resource threshold (ResourceThs, %).............. 332
Baseband hopping TRX exchange support
(Info_0_3)...................................................... 333
Allowed FACCH call setup after emergency call
(FacchCallInd_0) ............................................. 333
Allowed FACCH call setup when page respond
(FacchCallInd_1) ............................................. 334
Allowed call setup on FACCH (FacchCallInd_2) ............. 335
Allowed call reestablished on FACCH (FacchCall-
Ind_3) ........................................................... 335
System Parameters...................................................... 336
Interference averaging period (InterfAvgPrd) .............. 337
Interference Band Boundary (InterfBoundary_0~
InterfBoundary_5) ........................................... 338
Radio link timeout on MS side (MsRadioLKTmOut) ......... 339
Radio link failure criterion (ConFailCriterion)................ 340
Radio link timeout on BSS side (BsRadioLKT-
mOut)............................................................ 341
Receiving level threshold (RxLevThs).......................... 342
Receiving quality threshold (RxQualThs) ..................... 343
Radio link failure checking period (RxLevQualprd) ......... 344
Other Parameters ........................................................ 344
Preprocessing indication (Preprocess)......................... 345
Reserved Rate of eMLPP (EmlppThs) .......................... 346
Use cell EMLPP Threshold (UseCellEmlppThs)............... 347
Support frequency offset correct (Info_0_1)................ 347
Support maximum power on handover command
(Info_0_2)...................................................... 348
MR report time bitmap (MrRptTimeBmp)..................... 349
Cell Support Encryption Mode (CipherMode) ................ 350
Channel Select Strategy ........................................... 350
Confidential and Proprietary Information of ZTE CORPORATION XV
-
ZXG10 iBSC Radio Parameter Reference
GPRS Basic Parameters ................................................ 351
SGSN ID (SGSNID).................................................. 352
NSEI (NSEI) ........................................................... 353
BVCI (BVCI) ........................................................... 353
RAC....................................................................... 354
UPU unit (UpuUnit) .................................................. 355
DSP No. (DSP)........................................................ 356
GPRS Property 1 Parameters ......................................... 356
Additional reselect parameter indictor (Ad-
dResPI2) ........................................................ 357
SI13 sending position (Si13Locate) ............................ 358
Route area color code (RaColor) ................................ 359
Minimal number of idle CS channel (CsChansThs) ......... 360
Packet access priority threshold (PriAcThr) .................. 361
Packet System Information Send Speed
(SendSpeed)................................................... 361
Overload report period on PRACH (OvLoadPer, s) ......... 362
Link error counter (RLTimeout).................................. 363
PRACH receive signal level threshold (Prach-
BusyT) ........................................................... 364
Average measuring bursts number on PRACH
(MeaAvgSlot) .................................................. 365
Buffer threshold of paging message (PccchIndTh_0,
%) ................................................................ 365
Queue length threshold in 64 multiframe paging period
(PccchIndTh_1, %) .......................................... 366
PRACH overload threshold ratio (PccchIndTh_2,
%) ................................................................ 367
GPRS Property 2 Parameters ......................................... 368
Support DTM (DTMSupport) ...................................... 369
Is support CCN mode (CCNActive) ............................. 370
Is cell support system message status flow
(SIStatusInd).................................................. 371
Allow SOLSA MS to access (Exc_Acc) ......................... 371
CCCH SplitPgCycle support (SpgcSuport) .................... 372
Extended paging supported (EpageMode) ................... 373
PSI status supported (PsiStatInd) .............................. 374
Is the cell support extendable uplink TBF
(Ext_UTBF)..................................................... 374
Uplink delay time (UIDelayTime, ms) ......................... 375
XVI Confidential and Proprietary Information of ZTE CORPORATION
-
Downlink delay time (DIDelaytime, ms)...................... 376
Extend uplink TBF time (ExtUITBFTime, ms) ............... 377
Interval number of GPRS TBF downlinks RRBP
(GPRSDIRrbpInterVal)...................................... 377
Interval number of EGPRS TBF downlinks RRBP
(EGPRSDIRrbpInterVal) .................................... 378
Interval number of GPRS TBF uplinks ACK
(GPRSUIAckInterVal)........................................ 379
Interval number of EGPRS TBF uplinks ACK
(EGPRSUIAckInterVal)...................................... 379
Single Block Assign Offset (SBAssOffset) .................... 380
Polling retry times (PollingRetryTime)......................... 381
Uplink measure report period (Ulmeasureperiod,
ms) ............................................................... 381
Calculating period of load on PPCH (LoadPer, s) ........... 382
PSI1 send period (Psi1RepPer) .................................. 383
Selective granularity (USFGranularity)........................ 384
Support extended uplink dynamic allocation
(ExUpDynSupport)........................................... 384
Abis timeslots reserved for packet service
(Info_1_0)...................................................... 385
The MAX of Abis for GPRS user (Info_1_8).................. 386
Initial downlink allocation by multislot class 1
(Info1_1_0).................................................... 387
GPRS Property 3 Parameters ......................................... 387
C/I (Sc) ................................................................. 388
ARP (Sa) ................................................................ 389
THP (St)................................................................. 390
Support PS Queuing (PsQueueInd)............................. 390
Max PS Queue Count (PsMaxQueueInstNum)............... 391
Support PS Preemption (PsPreemptionInd).................. 392
Support 3G NACC (Support3GCCN)............................ 393
Support PS Prmp CS (PSPrmpCSSupport) ................... 393
Maximal resource for POC service (POCSrcThs,%)......... 394
GPRS Cell Options Parameters....................................... 395
T3168 (s) ............................................................... 396
T3192(ms) ............................................................. 396
T3142(s) ................................................................ 397
T3172(s) ................................................................ 398
DRX mode holding time (DrxTimeMax, s).................... 399
Confidential and Proprietary Information of ZTE CORPORATION XVII
-
ZXG10 iBSC Radio Parameter Reference
MAX blocks transmission in each TS (BsCvMax) ........... 400
Packet control acknowledgment type (CtraCK-
Type) ............................................................. 401
Access burst type (AccessType) ................................. 401
N3102 decrease step (PanDec).................................. 402
N3102 increase step (PanInc) ................................... 403
N3102 MAX (PanMax) .............................................. 404
GPRS phone init coding ............................................ 405
GPRS phones init code can be changed
(InitAttachExch_0)........................................... 406
GPRS NC Survey Parameters......................................... 406
Packet Idle mode (NcRepPerI, s)................................ 407
Packet transmission mode (NcRerPerT, s).................... 408
Extended measurement report order (MeaOrder) ......... 409
Network control order (CtrlOrder) .............................. 409
NC hold time in non-drx mode (NcNoDrxPer, s)............ 410
Extended measurement report order
(ExMeaOrder) ................................................. 411
Type of extended measurement report (ExtRep-
Type) ............................................................. 412
Report period of extended measurement (ExtRepPer,
s) .................................................................. 413
The Size of Test Report's Slip Window (Wnd) ............... 414
Allowed report number of the same cell in Slip Window
(AllowedRepNum)............................................ 415
GPRS Power Control Parameters .................................... 415
Filter period in the packet idle mode (T_AVG_W,
s) .................................................................. 416
Filter period in packet transmission mode (T_AVG_T,
s) .................................................................. 417
PSI4 sending mark (Psi4Send) .................................. 418
Power control measurement channel
(PcMeasChan) ................................................. 418
Power control parameter (Alpha) ............................... 419
Filter constant of power control (N_AVG_I) ................. 420
GPRS Cell Reselection Parameters.................................. 421
Reselection offset (ReselOff_0) .................................. 421
Reselection offset 2 (ReselOff_1) ............................... 422
Reselection temporary offset (TempOffset_0, dB) ......... 423
XVIII Confidential and Proprietary Information of ZTE CORPORATION
-
Reselection temporary offset 2 (TempOffset_1,
dB)................................................................ 424
Penalty time of cell reselection (PenalTime_0,
10s) .............................................................. 425
Penalty time of cell reselection 2 (PenalTime_1,
10s) .............................................................. 426
Interval of reselecting the same cell (T_Resel_0,
s) .................................................................. 426
Interval of reselecting the same cell 2 (T_Resel_1,
s) .................................................................. 427
Threshold of HSC signal level (HCS_Thr_0) ................. 428
Threshold of HSC signal level 2 (HCS_Thr_1) .............. 429
HCS priority (PrioClass_0) ........................................ 430
HCS priority 2 (PrioClass_1)...................................... 431
C31 hysteresis (C31_Hyst_0) .................................... 431
C31 hysteresis 2 (C31_Hyst_1) ................................. 432
GPRS cell reselection hysteresis (ReselHys_0,
dB)................................................................ 433
GPRS cell reselection hysteresis 2 (ReselHys_1,
dB)................................................................ 434
Routing reselection hysteresis (RaReselHys_0,
dB)................................................................ 435
Routing reselection hysteresis 2 (RaReselHys_1,
dB)................................................................ 436
Random access attempt permitted
(RadAcRetry_0)............................................... 437
Random access attempt permitted 2
(RadAcRetry_1)............................................... 438
Usage of cell reselection offset (C32_Qual_0) .............. 438
Usage of cell reselection offset 2 (C32_Qual_1) ........... 439
GPRS access minimum signal level 1 (RxLevAs-
Min_0) ........................................................... 440
GPRS access minimum signal level 2 (RxLevAs-
Min_1) ........................................................... 441
Priority threshold (Prio_Thr, dB)................................. 442
HCS exist (HCS_Exist_0) .......................................... 443
HCS exist 2 (HCS_Exist_1) ....................................... 444
GPRS MAX initial access signal level 1 (MsTxMax-
Cch_0)........................................................... 444
Confidential and Proprietary Information of ZTE CORPORATION XIX
-
ZXG10 iBSC Radio Parameter Reference
GPRS MAX initial access signal level 2 (MsTxMax-
Cch_1)........................................................... 446
LSA ID (LSA_Id)...................................................... 447
LSA Offset (LSA_Offset) ........................................... 447
GPRS Channel Parameters ............................................ 448
PAGCH reserved blocks (PagBlkRes)........................... 449
PBCCH reserved blocks (PbcchBlks) ........................... 449
PRACH reserved blocks (PrachBlks)............................ 450
Interval range of packet access attempt (TxInt)........... 451
Interval period of packet access attempt (S) ............... 452
MAX Times of Attempt (MaxRetrans) .......................... 453
Access Control Level (AccCtrlClass) ............................ 454
Access Persist Level (PersistLev)................................ 455
Support of subscriber occupying other preference
channel (HybridOccuSupp)................................ 456
Support of PS subscriber moving out of other
preference channel (AllowPsMove) ..................... 456
Support of CS subscriber moving Access Persist Level
(AllowCsMove) ................................................ 457
Congeneric service threshold for PS-moving
(SfPreferBusyThs, %)....................................... 458
Un-congeneric service threshold for PS-moving
(OpPreferBusyThs) .......................................... 459
EDGE Property Parameters............................................ 459
Max number of GTTP Lapdm frame (GttpLapdm-
Num)............................................................. 460
Support EGPRS packet channel request access program
(EgprsPacketChreq) ......................................... 461
Support uplink LA+IR quality control (IrSup-
portUp) .......................................................... 461
Take "Preemptivetrans bit" function (PreemptiveR-
ans)............................................................... 462
Average filter period for uplink BEP (BEPperiodUp) ......... 463
Average filter period for downlink BEP (BEPperiod-
Down)............................................................ 464
EGPRS phone quality measure mode
(LinkQuameaMode).......................................... 465
EGPRS Phone Init Coding.......................................... 465
EGPRS phones init code can be changed
(InitAttachExch_1)........................................... 466
XX Confidential and Proprietary Information of ZTE CORPORATION
-
Cell Object Parameters..................................469TRX Parameters .......................................................... 469
TRX Info Parameters ................................................ 469
TRX ID (TrxId)................................................ 470
SubCell ID (SubCellId)..................................... 471
TRX Type (TrxType) ......................................... 471
Priority (TrxPriority)......................................... 472
BCCH carrier frequency (BcchMark) ................... 473
Static power level (PwRreduction) ..................... 473
Power level (PowerClass) ................................. 474
Support FHS................................................... 475
BhGroupId ..................................................... 476
FhsID ............................................................ 476
Frequency...................................................... 477
Channel Info Parameters .......................................... 478
TSC............................................................... 478
TsChannelComb .............................................. 479
TSC............................................................... 481
MAIO............................................................. 481
Dynamic TS.................................................... 482
Ps Service Preference Property ......................... 483
PDCH Precedence............................................ 484
TSC............................................................... 484
PDCH ............................................................ 485
Ps Service Preference ...................................... 485
Dynamic ts..................................................... 486
IP Parameters ......................................................... 487
Bipb Unit ....................................................... 487
DspSunit........................................................ 488
DspMarkSeq................................................... 488
Port No.......................................................... 489
Panel Parameters..................................................... 489
TRX Mode ...................................................... 490
Delay Count ................................................... 491
Use IRC ......................................................... 491
Support antenna hop....................................... 492
Power Control Parameters............................................. 493
Power Control Parameters......................................... 493
Uplink rapid power control indication
(UlRapidPcInd) .................................... 494
Confidential and Proprietary Information of ZTE CORPORATION XXI
-
ZXG10 iBSC Radio Parameter Reference
Downlink rapid power control indication
(DlRapidPcInd) .................................... 494
Power control PwrDecrLimit .............................. 495
Power Survey Parameters ......................................... 496
Report period of measurement for power control
(PwrCtrlReportPrd, SACCH double
frame)................................................ 496
Uplink power level Sample count
(PcUlLevWindow) ................................. 497
Uplink level Weight (PcUlLevWeight) .................. 498
Downlink power level Sample count
(PcDlLevWindow) ................................. 499
Downlink level Weight (PcDlLevWeight).............. 500
Uplink quality level (PcUlQualWindow) ............... 501
Uplink quality Weight (PcUlQualWeight).............. 501
Downlink quality level (PcDlQualWindow) ........... 502
Downlink quality Weight (PcDlQualWeight) ......... 503
Power Adjust Threshold Parameters ........................... 504
Increase uplink level Threshold (PcULInclLevTh-
sThs), Value P (PcULInclLevThsP), and
Value N (PcULInclLevThsN).................... 505
Increase downlink level Threshold
(PcDLInclLevThsThs), Value P
(PcDLInclLevThsP), and Value N
(PcDLInclLevThsN) ............................... 505
Decrease uplink level Threshold (PcULRedLevTh-
sThs), Value P (PcULRedLevThsP), and
Value N (PcULRedLevThsN) ................... 506
Decrease downlink level Threshold
(PcDLRedLevThsThs), Value P
(PcDLRedLevThsP), and Value N
(PcDLRedLevThsN) ............................... 507
Increase uplink quality Threshold
(PcULInclQualThsThs), Value P
(PcULInclQualThsP), and Value N
(PcULInclQualThsN).............................. 508
Increase downlink quality Threshold
(PcDLInclQualThsThs), Value P
(PcDLInclQualThsP), and Value N
(PcDLInclQualThsN) ............................. 509
XXII Confidential and Proprietary Information of ZTE CORPORATION
-
Decrease uplink quality Threshold
(PcULRedQualThsThs), Value P
(PcULRedQualThsP), and Value N
(PcULRedQualThsN) ............................. 509
Decrease downlink quality Threshold
(PcDLRedQualThsThs), Value P
(PcDLRedQualThsP), and Value N
(PcDLRedQualThsN) ............................. 510
Other Parameters .................................................... 511
Power increasing step (PwrIncStep)................... 511
Power decreasing step (PwrRedStep, dB) ........... 512
Uplink power control allowed (PwrCon-
trolUl) ................................................ 513
Downlink power control allowed (PwrCon-
trolDl) ................................................ 513
MAX power level of MS (MsTxPwrMax) ............... 514
MIN power level of MS (MsTxPwrMin)................. 515
MIN power level of BS (BsTxPwrMin) ................. 516
MIN interval of power control (SACCH double
frame) (PcMinInterval).......................... 517
GPRS Power Control Parameters ................................ 517
Expected signal intensity of MS (SS_BTS)........... 518
Uplink power control strategy (UlPwCtrl) ............ 519
Downlink power control strategy (DiPwCtrl) ......... 519
Downlink power control mode (PwC-
trlMode) ............................................. 520
Power control level (PwCtrlLev)......................... 521
Power descending of PDCH to BCCH in A mode
(P0) ................................................... 521
Handover Control Parameters........................................ 522
Handover Pretreatment Parameters............................ 522
Number of zero allowed in AV (ZeroAl-
lowed)................................................ 523
Uplink power level (HoUlLevWindow) ................. 524
Uplink level Weight (HoUlLevWeight) ................. 525
Downlink power level (HoDlLevWindow) ............. 526
Downlink level Weight (HoDlLevWeight) ............. 526
Uplink quality level (HoUlQualWindow)............... 527
Uplink quality Weight (HoUlQualWeight) ............. 528
Downlink quality level (HoDlQualWindow)........... 529
Confidential and Proprietary Information of ZTE CORPORATION XXIII
-
ZXG10 iBSC Radio Parameter Reference
Downlink quality Weight (HoDlQualWeight) ......... 530
Distance (DistanceWindow) .............................. 531
Neighboring cell (NCellWindow) ........................ 531
Handover Level Parameters....................................... 532
Uplink receive level Threshold (HoUlLevThs),
Value N (HoUlLevN), Value P
(HoUlLevP).......................................... 533
Downlink receive level Threshold (HoDlLevThs),
Value N (HoDlLevN), Value P
(HoDlLevP) ......................................... 534
Uplink receive quality Threshold (HoUlQualThs),
Value N (HoUlQualN), Value P
(HoUlQualP) ........................................ 535
Downlink receive quality Threshold
(HoDlQualThs), Value N (HoDlQualN),
Value P (HoDlQualP)............................. 536
Uplink receive level of intro-ho (IntraHoUlLevN)
Value N / Value P (IntraHoUlLevP) .......... 537
Downlink receive level of intro-ho
(IntraHoDlLevN) Value N / Value P
(IntraHoDlLevP)................................... 538
Good C/I Threshold (GoodCiThs), Value N
(GoodCiN), Value P (GoodCiP)................ 539
Bad C/I Threshold (BadCiThs), Value N (BadCiN),
Value P (BadCiP).................................. 540
Rapid handover Threshold (RapidHoThs) / Value
N (RapidHoN) ...................................... 541
Distance handover value N (DistanceN) / Value P
(DistanceP) ......................................... 542
PBGT handover Value N (PBGTHoN) / Value P
(PBGTHoP).......................................... 542
Handover Condition Parameters................................. 543
Max Time Advance Threshold between MS and
BTS (DistanceThs)................................ 544
MIN interval between inter-cell handover
(HoMinInterval, s)................................ 545
Prior layer selecting parameter on signal
level/quality (LayerPriority) ................... 546
XXIV Confidential and Proprietary Information of ZTE CORPORATION
-
Handover to same layer other band
neighbor cell for PBGT permitted
(PbgtHoLayer_0).................................. 547
Handover to neighbor cell with no layer
relation for PBGT permitted
(PbgtHoLayer_1).................................. 547
Handover to upper layer neighbor cell for PBGT
(PbgtHoLayer_2).................................. 548
Handover to under layer neighbor cell for PBGT
(PbgtHoLayer_3).................................. 549
Synchronism (HoPatternInd_0) ......................... 549
Asynchronism (HoPatternInd_1) ....................... 550
Pseudo-synchronization (HoPatternInd_2) .......... 550
Pre-synchronism (HoPatternInd_3).................... 551
Downlink rapid handover threshold
(DLRapidHoThs)................................... 552
Downlink rapid handover N (DLRapidHoN) .......... 552
Downlink rapid handover offset of high speed
(DLRapidHoOffset_0)............................ 553
Downlink rapid handover offset of middle speed
(DLRapidHoOffset_1)............................ 554
Downlink rapid handover offset of low speed
(DLRapidHoOffset_2)............................ 555
Downlink rapid handover enable (HoCon-
trol_23).............................................. 555
Handover Control Parameters.................................... 556
Allow SDCCH handover (HoControl_0) ............... 557
Allow inter-cell handover attempt due to uplink
interference (HoControl_1).................... 558
Allow inter-cell handover attempt due to downlink
interference (HoControl_2).................... 558
Allow handover due to distance (HoCon-
trol_3)................................................ 559
Allow standard PBGT handover (HoCon-
trol_4)................................................ 559
Allow automatic handover based on traffic
(HoControl_5) ..................................... 560
Allow intra-cell handover in super TRX
channel due to downlink interference
(HoControl_8) ..................................... 561
Confidential and Proprietary Information of ZTE CORPORATION XXV
-
ZXG10 iBSC Radio Parameter Reference
Allow intra-cell handover in super TRX
channel due to uplink interference
(HoControl_9) ..................................... 561
Allow adjacent cells handover in super
TRX channel due to PBGT
(HoControl_10).................................... 562
Allow dynamic adjustment of handover priority
(HoControl_11).................................... 563
Allow rapid handover (HoControl_12) ................ 563
Allow Macro-Micro delay handover
(HoControl_13).................................... 564
Allow Micro-Micro delay handover
(HoControl_14).................................... 564
Allow force transfer handover (HoCon-
trol_16).............................................. 565
Allow quality handover in uplink (HoCon-
trol_19).............................................. 566
Allow level handover in uplink (HoCon-
trol_20).............................................. 566
Allow quality handover in downlink
(HoControl_21).................................... 567
Allow level handover in downlink
(HoControl_22).................................... 567
The priority of the handover from macro cell to
micro cell (MacroMicroPrio) ................... 568
Others ................................................................... 569
Penalty time for handover failure
(HoFailPenalTime) ................................ 569
Difference of dynamic priority (DynPrioOff-
set).................................................... 570
PBGT difference (PbgtOffset) ............................ 571
Layer control value for handover on traffic
(TrafficHoLayrCtl)................................. 571
Frequency control value for handover on traffic
(TrafficHoFreqCtl)................................. 572
Threshold of traffic for handover (TrafficThs,
%)..................................................... 573
Lag time for PBGT between different layers
(PbgtHoParam_0) ................................ 574
XXVI Confidential and Proprietary Information of ZTE CORPORATION
-
Level offset for PBGT to up layer
(PbgtHoParam_1) ................................ 574
Level offset for PBGT to low layer
(PbgtHoParam_2) ................................ 575
The threshold for starting PBGT handover
(PbgtHoStartThs) ................................. 576
Handover from macro to micro (MacroMicroStart-
Ths) ................................................... 576
Hyteresis timer when traffic handover
(TrafficHyteresisTm, s).......................... 577
Handover Arithmetic Parameters................................ 578
Traffic handover threshold (TrafficLevThs) .......... 578
Level offset during penalty (PenaltyLevOff-
set).................................................... 579
Uplink interference quality offset (QOffSe-
tUl) .................................................... 580
Uplink interference level offset (SOffSetUl) ......... 580
Downlink interference quality offset
(QOffsetDl) ......................................... 581
Downlink interference level offset
(SOffSetDl) ......................................... 582
Invalid intra-handover time (TMaxiHo) ............... 583
MAX count of invalid intra-handover
(MaxiHo) ............................................ 584
MAX path loss threshold on force handover
(MaxLossThs) ...................................... 585
MAX time advance threshold on force handover
(MaxTaThs) ......................................... 586
N value of force handover (HoForceN)................ 587
P value of force handover (HoForceP) ................ 588
Subcell Parameters .................................................. 590
Dual band power offset (DuleBandOffset) ........... 590
The MAX of path loss (PathLossMax).................. 591
The MIN of path loss (PathLossMin) ................... 591
The MAX of time advance (SubCellTAMax) .......... 592
The MIN of time advance (SubCellTAMin) ........... 593
N value of subcell handover (SubCellN).............. 593
P value of subcell handover (SubcellP) ............... 594
Subcell handover algorithm (HoCon-
trol_17).............................................. 595
Confidential and Proprietary Information of ZTE CORPORATION XXVII
-
ZXG10 iBSC Radio Parameter Reference
UTRAN Handover Control Parameters ............................. 595
Basic Properties 1 Parameters ................................... 596
Punishment period of UTRAN cell when handover
failure (HoFailPenalTm3G) ..................... 596
Slide window size for calculating Ec/No
or RSCP average value to be zero
(HoWindow3G) .................................... 597
Number that measurement value allowed to be
zero (ZeroAllowed3G)........................... 597
UTRAN handover (ServiceHo) ........................... 598
FDD/TDD handover (FDD/TDDPrio) ................... 599
Threshold for load sharing (Load-
HoRSCPThsFDD) .................................. 600
Ec/No threshold when handover from
GSM to 3G for load sharing
(LoadHoEcNoThsFDD)........................... 601
RSCP threshold when handover from
GSM to TDD for load sharing
(LoadHoRSCPThsTDD) .......................... 602
Basic Properties 2 Parameters ................................... 602
Inter system handover supported
(InterSysRdCtrl) .................................. 603
Directed retry to UTRAN cell allowed
(InterSysHoCtrl) .................................. 604
Handover from GSM to UTRAN FDD RSCP
Threshold (HoRSCPThsFDD) .................. 604
Handover from GSM to UTRAN FDD RSCP Value
N (HoRSCP_N_FDD) ............................. 605
Handover from GSM to UTRAN FDD RSCP Value
P (HoRSCP_P_FDD).............................. 606
Handover from GSM to UTRAN FDD Ec/No
Threshold (HoEcNoThsFDD)................... 606
Handover from GSM to UTRAN FDD Ec/No Value
N (HoEcNo_N_FDD).............................. 607
Handover from GSM to UTRAN FDD Ec/No Value
P (HoEcNo_P_FDD) .............................. 608
Handover from GSM to UTRAN TDD RSCP
Threshold (HoRSCPThsTDD) .................. 608
Handover from GSM to UTRAN TDD RSCP Value
N (HoRSCP_N_TDD) ............................. 609
XXVIII Confidential and Proprietary Information of ZTE CORPORATION
-
Handover from GSM to UTRAN TDD RSCP Value
P (HoRSCP_P_TDD).............................. 610
UTRAN Cell Control Parameters ..................................... 610
Basic Properties 1 Parameters ................................... 611
Channel location of si2quater broadcast
(SI2QuaterPos).................................... 611
CS measurement type reported by UE
(ReportTypeCS) ................................... 612
Measurement threshold of UE performing UTRAN
cell reselection (Qsearch_I) ................... 612
Threshold when UE performs search under
specialized mode (Qsearch_C) ............... 613
Initial parameter instead of qsearch_c
before UE receiving qsearch_C
(QsearchCInit)..................................... 614
CS number of same frequency adjacent cells in
report (SvrBandRprtCS)........................ 615
Max Number In Adjacent GSM cell
(IndexStartEMR).................................. 615
CS class of reported quantities of UTRAN
adjacent cells (FDDrepQntCS)................ 616
MIN Ec/No of UTRAN reselecting cell
(FDD_Qmin)........................................ 617
CS MAX number of UTRAN/FDD adjacent
cells in measurement report
(FDDMulRatrrptCS) .............................. 617
FDD reselection offset (FDD_Qoffset)................. 618
Require UE to send UTRAN class-mark change
message early (ECSC_3G)..................... 619
Basic Properties 2 Parameters ................................... 619
CS measurement reporting rate of adjacent cell
(ReportRateCS) ................................... 620
CS multiband report indication (MulBndR-
prtCS) ................................................ 621
CS offset which is added when UE reports rxlev
value (ScaleOrdCS) .............................. 622
TDD reselection offset (TDD_Qoffset) ................ 623
CS MAX number of UTRAN/TDD adjacent
cells in measurement report
(TDDMulRatRrptCS).............................. 623
Confidential and Proprietary Information of ZTE CORPORATION XXIX
-
ZXG10 iBSC Radio Parameter Reference
CS UE report invalid cell level allowed
(InvldBSICRprtCS) ............................... 624
CS UE search UTRAN adjacent cell in
bsic decoding frame indication
(SearchPrioCS3G) ................................ 625
GSM850M Adjacent cell reporting signal level
Offset (RprtOffsetCS850) ...................... 625
GSM850M Adjacent cell reporting signal level
Threshold (RprtThoCS850) .................... 626
GSM900M Adjacent cell reporting signal level
Offset (RprtOffsetCS900) ...................... 627
GSM 900M Adjacent cell reporting signal level
Threshold (RprtThoCS900) .................... 627
GSM1800M Adjacent cell reporting signal level
Offset (RprtOffsetCS1800) .................... 628
GSM1800M Adjacent cell reporting signal level
Threshold (RprtThoCS1800) .................. 629
GSM1900M Adjacent cell reporting signal level
Offset (RprtOffsetCS1900) .................... 630
GSM1900M Adjacent cell reporting signal level
Threshold (RprtThoCS1900) .................. 630
UTRAN/FDD Adjacent cell reporting signal level
Offset (FDDRprtOffsetCS)...................... 631
UTRAN/FDD Adjacent cell reporting signal level
threshold (FDDRprtThoCS) .................... 632
UTRAN/TDD Adjacent cell reporting signal level
Offset (TDDRprtOffsetCS) ..................... 633
UTRAN/TDD Adjacent cell reporting signal level
threshold (TDDRprtThoCS) .................... 633
GPRS Parameters 1.................................................. 634
PS offset which is added when ue reports rxlev
value (ScaleOrdPS) .............................. 635
PS measurement type reported by UE
(ReportTypePS) ................................... 635
PS number of same frequency adjacent cells in
report (SvrBandRprtPS) ........................ 636
PS measurement reporting rate of adjacent cell
(ReportRatePS).................................... 637
Measurement threshold of UE performing GPRS
UTRAN cell (Qsearch_P)........................ 638
XXX Confidential and Proprietary Information of ZTE CORPORATION
-
FDD GPRS reselection offset (FDD_GPRS_Qoff-
set).................................................... 638
TDD GPRS reselection offset (TDD_GPRS_Qoff-
set).................................................... 639
PS MIN Ec/No of UTRAN reselecting cell
(FDD_QminPS) .................................... 640
Offset of FDD_QminPS (FDD_Qmin_Off-
setPS) ................................................ 641
PS MIN RSCP of UTRAN reselecting cell
(FDD_RSCPminPS) ............................... 641
Measurement report threshold of Ec/No or RSCP
(FDDRprtTho2PS) ................................ 642
PS class of reported quantities of UTRAN adjacent
cells (FDDRepOntPS) ............................ 643
PS MAX number of UTRAN/FDD adjacent
cells in measurement report
(FDDMulRatRrptPS) .............................. 644
PS multiband report indication (MulBndR-
prtPS) ................................................ 644
TDD multi report PS (TDDMulRatRrptPS) ............ 646
GPRS Parameters 2.................................................. 646
PS UE report invalid cell level allowed
(InvldBSICRprtPS) ............................... 647
PS UE search UTRAN adjacent cell in bsic decoding
frame indication (SearchPrioPS3G) ......... 648
Reselection priority control of 2G/3G
(ServiceCC)......................................... 648
GSM850M Adjacent cell reporting signal level
Offset (RprtOffsetPS850) ...................... 649
GSM850M Adjacent cell reporting signal level
Threshold (RprtThoPS850) .................... 650
GSM900M Adjacent cell reporting signal level
Offset (RprtOffsetPS900) ...................... 650
GSM 900M Adjacent cell reporting signal level
Threshold (RprtThoPS900) .................... 651
GSM1800M Adjacent cell reporting signal level
Offset (RprtOffsetPS1800)..................... 652
GSM1800M Adjacent cell reporting signal level
Threshold (RprtThoPS1800)................... 653
Confidential and Proprietary Information of ZTE CORPORATION XXXI
-
ZXG10 iBSC Radio Parameter Reference
GSM1900M Adjacent cell reporting signal level
Offset (RprtOffsetPS1900)..................... 653
GSM1900M Adjacent cell reporting signal level
Threshold (RprtThoPS1900)................... 654
UTRAN/FDD Adjacent cell reporting signal level
Offset (FDDRprtOffsetPS)...................... 655
UTRAN/FDD Adjacent cell reporting signal level
threshold (FDDRprtThoPS) .................... 656
UTRAN/TDD Adjacent cell reporting signal level
Offset (TDDRprtOffsetPS)...................... 656
UTRAN/TDD Adjacent cell reporting signal level
threshold (TDDRprtThoPS) .................... 657
Adjacent Cell Parameters.............................................. 658
Adjacent Interference Cell Parameters........................ 658
Interference cell No. (IntfObjectId) ................... 659
Related cell DN (RelationDN) ............................ 659
Adjacent Cell Handover and Reselection
Parameters ..................................................... 660
Adjacent cell handover and reselection ID
(HoResObjectId) .................................. 660
Priority of handover (Hopriority)........................ 661
Max power level of MS (MsTxPwrMax)................ 662
MIN power level for handover access
(RxLevMin) ......................................... 662
MIN threshold of signal level for handover on
PBGT (HoMarginPbgt) ........................... 664
MIN threshold of signal level for handover on
power level (HoMarginRxLev) ................ 664
MIN threshold of signal level for handover on
quality (HoMarginRxQual) ..................... 665
MAX level difference of force handover
(MaxForceHoDiff) ................................. 666
Handover force resource threshold
(HoForceResThs).................................. 667
Neighboring cell layer (NCellLayer) .................... 667
CS adjacent cell report priority (RepPrioCS) ......... 668
PS adjacent cell report priority (RepPrioPS) ......... 669
Target cell traffic threshold (TargetCellTraf-
ficThs)................................................ 671
XXXII Confidential and Proprietary Information of ZTE CORPORATION
-
Handover threshold from macro to micro
(MacroMicroHoThs) .............................. 671
Counter of handover threshold from macro to
micro (MacroMicroHon)......................... 672
The direction fo neighbour cell (NCellDir) ........... 672
Related Cell DN............................................... 673
Is related cell (IsRelatedCell) ............................ 674
Is handover forced neighbor cell (IsHoFor-
ceNcell) .............................................. 674
CCN supported (CCNSupport) ........................... 675
Adjacent Cell Handover Parameters............................ 676
Adjacent cell handover object ID
(HoObjectId) ....................................... 676
Priority of handover (HoPriority)........................ 677
MAX power level of MS (MsTxPwrMax) ............... 678
MIN power level for handover access
(RxLevMin) ......................................... 679
MIN threshold of signal level for handover on
PBGT (HoMarginPbgt) ........................... 680
MIN threshold of signal level for handover on
power level (HoMarginRxLev) ................ 681
MIN threshold of signal level for handover on
quality (HoMarginRxQual) ..................... 681
MAX level difference of force handover
(MaxForceHoDiff) ................................. 682
Handover force resource threshold
(HoForceResThs).................................. 683
Neighboring cell layer (NCellLayer) .................... 683
CS adjacent cell report priority (RepPrioCS) ......... 684
Target cell traffic threshold (TargetCellTraf-
ficThs)................................................ 686
Handover threshold from macro to micro
(MacroMicroHoThs) .............................. 686
Counter of handover threshold from macro to
micro (MacroMicroHoN)......................... 687
The direction fo neighbour cell (NCellDir) ........... 687
Is related cell (IsRelatedCell) ............................ 688
Is handover forced neighbor cell (IsHoFor-
ceNcell) .............................................. 689
Related Cell DN............................................... 689
Confidential and Proprietary Information of ZTE CORPORATION XXXIII
-
ZXG10 iBSC Radio Parameter Reference
Adjacent Cell Reselection Parameters ......................... 690
Adjacent cell reselection object ID
(ReSelObjectId) ................................... 690
Adjacent cell report priority (RepPrioPS)............. 691
CCN supported (CCNSupport) ........................... 692
Related Cell DN............................................... 692
UTRAN Adjacent Cell Handover and Reselection
Parameters ..................................................... 693
Adjacent UTRAN cell handover and reselection
object ID (S3GHoRSObjectId)................ 694
RSCP offset handover to UTRAN adjacent cell
(HoRSCPOffset3G) ............................... 694
Ec/No offset handover to UTRAN adjacent cell
(HoEcNoOffset3G)................................ 695
CS adjacent cell report priority (RepPrioCS) ......... 696
PS adjacent cell report priority (RepPrioPS) ......... 697
CCN supported (CCNSupport) ........................... 698
Target cell traffic threshold (TargetCellTraf-
ficThs)................................................ 698
Related cell DN ............................................... 699
UTRAN Adjacent Cell Handover Parameters ................. 700
UTRAN HO ID (S3GHoObjectId) ........................ 700
RSCP offset handover (HoRSCPOffset3G) ........... 701
Ec/No offset handover (HoEcNoOffset3G) ........... 702
CS adjacent cell report priority (RepPrioCS) ......... 702
Target cell traffic threshold (Tar