uk e-catalogue 2014
TRANSCRIPT
Quality Countersinks for Aerospace, Marine, Automotive and General Engineering
Manufactured by
Catalogue 2014/15
Contact InformationBSA Regal Cutting Tools Limited
Speedwell HouseWest Quay Road
Southampton SO15 1GY
TEL: 44 (0) 23 8036 6408FAX: 44 (0) 23 8036 6301
[email protected]/cuttingtools
Sales Director
Sales & Accounts
Nyree [email protected]
(PER ORDER LINE)Quantity Discounts
UK Carriage ChargesRoyal Mail 1st Class - £3.75
Special next day by 1pm - £7.50
Parcel Force 24 - £12.00 (Guide price only)
QUANTITY DISCOUNT1 - 4 25%5 - 24 30%25 - 74 32.5%
75 - Plus 35%
Note: Discount is applicable to the list price published in this catalogue and is per order line
(not total quantity of tools ordered).
General Information1 - 8
22
25
23 - 24
27 - 28
26
5859 Morse Taper 3 Flute Countersinks
Rose Countersinks
5760 Counterbores
5770 Imperial Counterbores(Close Fit, +1/64 & +1/32)
Countersink Sets
Contents
Imperial Piloted Countersinks
Metric Piloted Countersinks
Microstop Piloted Countersinks
9 - 10
12 - 13
11
19 - 21
19 - 21
5858 Metric 3 Flute Countersinks
5858 Imperial 3 Flute Countersinks
DIN 335C & 334C 3 Flute Countersinks
15
14
17
16
18
5850 Metric 2 Flute Countersinks
5850 Imperial 2 Flute Countersinks
5880 Deburring Tools (Zero Flute)
5890 Single Flute Countersinks
About UsBSA Regal Cutting Tools specialise in the manufacture of the well established Robert Charles brand of high quality Countersinks and Counterbores.
We are the sole manufacturer of Robert Charles branded tools which, over the past 35 years, have earned their enviable worldwide reputation in the demanding aerospace, automotive, marine and general engineering industries.
Robert Charles’ founding principle was to specialise in Countersinks and Counterbores to produce the best available performance.
We remain unconditionally faithful to this principle since acquiring the Robert Charles brand in early 2009.
BSA Regal Cutting Tools continues to supply the same high quality tools using only the best quality M35 and M42 high speed steel alloy with cobalt. The cobalt content of M35 and M42 (5% and 8% respectively) gives increased ‘Hot Hardness’ extending tool life with faster cutting speeds and feeds.
Next day deliveries of standard tools are usually available from our extensive stock with specials taking a few days longer.
BLOODHOUND SSCproduct sponsor
The CarBloodhound SSC is exactly what it says - a SuperSonic Car! It is supersonic because it is designed to go faster than the speed of sound.
It is a car because it has four wheels and is under full control of its driver.
It has a slender body of approximately 14m length with two front wheels within the body and two rear wheels mounted externally within wheel fairings.
Bloodhound SSC is a jet and rocket powered car designed to go at 1,000 mph (just over 1,600 kph). It weighs over 7 tonnes and the engines produce more than 135,000 horsepower - more than 6 times the power of all the Formula 1 cars on a starting grid put together!
The Car is a mix of car and aircraft technology, with the front half being a carbon fibre monocoque like a racing car and the back half being a metallic framework and panels like an aircraft.
Our SponsorshipWe were initially approached by the BLOODHOUND SSC Build Lead Engineer Chris Dee who had used our tools before during his time with the Arrows Formula 1 Team. Our tools are required for countersinking the tens of thousands of holes on the car in preparation for riveting.
We are proud to be the number one choice for this vital part of the build and even prouder to be product sponsoring this project.
5
Speedwell House, West Quay Road, Southampton, SO15 1GY T: 023 8036 6408 ~ F: 023 8036 6301 ~ E: [email protected]
www.bsa-regal.co.uk
PAYMENT METHODS
CREDIT ACCOUNT Please provide details of your company on your letterhead showing your registration number if you wish to open a 30 day credit account. Subject to your company’s credit status accounts are normally opened within 24 hours.
CHEQUE All recognised Bank or Building Society cheques are accepted. Please make cheques payable to BSA Regal Cutting Tools Limited.
BACS If you wish to pay your account via BACS, our account details are as follows:-
Banker: Barclays Bank plc 67B Above Bar, Southampton, SO14 7DZ
Account Name: BSA Regal Cutting Tools Limited
Account No: 60448621
Sort Code: 20-79-25
CREDIT CARD If you do not have an account with us or wish to place an order before your account has been established. All major credit/debit cards are accepted.
PRICING
All our prices are subject to VAT, quotes remain valid for 30 days only, unless by written agreement and are subject to change in line with our pricing policies.
Special selling prices can be negotiated for volume quantities of specific cutting tools where we can pass on savings made from high volume production.
CANCELLATIONS
Orders cannot be cancelled once they have been despatched. For cutting tools requiring special manufacture cancellation will not be permitted once the manufacturing process has commenced.
RETURNS
Tools may be returned by way of the following procedure: Authorisation should be obtained prior to returning goods. The cutting tools must always be returned unused. Returns must be made within 14 days of the despatch date unless special authorisation
has been agreed. A re-stocking charge will generally be applied for tools that are no longer required or
returned due to customer error.
6
100% of our range is available to be Titanium Nitride coated(TiN). TiN coating offers the following benefits:
LONGER TOOL LIFE
IMPROVED CUTTING EDGE RETENTION
REDUCED FRICTION/INCREASED LUBRICITY
HARDER CUTTING SURFACE
FASTER CUTTING SPEEDS
COSMETICALLY APPEALING
ORDERING INFORMATION
Please call for current prices and lead times. A minimum order value of £30 net applies.
These are used with our threaded shank countersinks and allow the engineer to adjust the depth of the countersink in 0.001” increments. Predominantly used in the aerospace industry for rivet preparation, they are also very useful in general engineering applications.
ORDERING INFORMATION
Available in various sizes to suit various threads
e.g. M6 x 1, M8 x 1 and 1/4” UNF.
Please call for current prices.
Titanium Nitride Coated Tools
Microstop Cages
We offer the following medium to high volume sub contract services: Centreless grinding 4mm - 20mm Ø, up to 75mm long Cylindrical grinding - between centres Turning - small components - 3mm - 32mm Ø, up to 160mm
long HSS tool regrinds - Countersinks, End Mills, Slot Drills
Our regrind service is a cost effective way to get more from worn out countersinks (of any brand) and end mills before replacing with new. Tools returned to us that are eligible for regrinding can be completed within 3 days. It is possible that some tools will be scrapped as only tools with slight wear can be reground.
Variations of our standard range such as angle changes, extra flutes or specific diameters can be manufactured from our stock of universal tool blanks. Offering a quick and cost effective service. Please call us for a quote. We can manufacture tools to customer specification and usually deliver these within 3 to 4 weeks.
Regrind Service
Sub Contract Services
Specials
7
8
Screw Size
B C
M3 3.00mm 90ºM4 4.00mm 90ºM5 5.00mm 90ºM6 5.00mm 90ºM8 8.00mm 90ºM10 10.00mm 90ºM12 12.00mm 90ºM14 14.00mm 90º
Screw Size
A B C Screw Size
B C
8BA .164" (4.16mm) .0866" 82º No.0 .0600" 82º6BA .211" (5.35mm) .1102" 82º No.1 .0730" 82º5BA .239" (6.07mm) .1260" 82º No.2 .0860" 82º4BA .269" (6.83mm) .1417" 82º No.3 .0990" 82º3BA .307" (7.80mm) .1614" 82º No.4 .1120" 82º2BA .351" (8.90mm) .1850" 82º No.5 .1250" 82º1BA .396" (10.05mm) .2087" 82º No.6 .1380" 82º0BA .449" (11.40mm) .2362" 82º No.8 .1640" 82º1/8 .239" (6.07mm) .1250" 82º No.10 .1900" 82º3/16 .356" (9.04mm) .1875" 82º 1/4 .2500" 82º1/4 .475" (12.06mm) .2500" 82º 5/16 .3125" 82º5/16 .594" (15.08mm) .3125" 82º 3/8 .3750" 82º3/8 .712" (18.08mm) .3750" 82º 7/16 .4375" 82º7/16 .831" (21.10mm) .4375" 82º 1/2 .5000" 82º1/2 .950" (24.13mm) .5000" 82º 5/8 .6250" 82º9/16 1.069" (27.15mm) .5625" 82º 3/4 .7500" 82º5/8 1.187" (30.15mm) .6250" 82º 7/8 .8750" 82º3/4 1.425" (36.20mm) .7500" 82º 1 1.000" 82º
Screw Size
A B Pilot Dia Head Dia
M3 5.50mm 3.00mm 3.40mm 6.00mmM4 7.00mm 4.00mm 4.50mm 6.00mmM5 8.50mm 5.00mm 5.50mm 10.00mmM6 10.00mm 6.00mm 6.40mm 11.00mmM8 13.00mm 8.00mm 9.00mm 15.00mmM10 16.00mm 10.00mm 11.00mm 18.00mmM12 18.00mm 12.00mm 14.00mm 20.00mm
ISO Metric Screws
22.40mm26.88mm30.24mm
Screw Size Chart
Counterbore Cap Screw Size Chart
6.72mm8.96mm11.20mm
A
13.44mm17.92mm
BA, BSW and BSF Screws UNC and UNF ScrewsA
.138" (3.50mm)
.168" (4.27mm)
.197" (5.00mm)
.226" (5.74mm)
.255" (6.47mm)
.281" (7.13mm)
.307" (7.80mm)
.359" (9.11mm).411" (10.40mm).531" (13.40mm).656" (16.66mm).781" (19.83mm).844" (21.43mm).935" (23.75mm)1.188" (30.17mm)1.438" (36.52mm)1.688" (42.87mm)1.938" (49.22mm)
ISO Metric Cap Screws
3 FlutesStraight shank
Pilot Included Body Shank Overall Shank ListCode Diameter Angle Diameter Diameter Length Length Price
inches degrees inches inches inches inches £5855-3/32-90 3/32 90 0.170 3/16 2.1/2 1.3/4 12.955855-3/32-100 3/32 100 0.190 3/16 2.1/2 1.3/4 12.955855-3/32-120 3/32 120 0.190 3/16 2.1/2 1.3/4 12.955855-1/8-90 1/8 90 0.228 3/16 2.1/2 1.3/4 13.275855-1/8-100 1/8 100 0.252 3/16 2.1/2 1.3/4 13.275855-1/8-120 1/8 120 0.252 3/16 2.1/2 1.3/4 13.275855-5/32-90 5/32 90 0.275 3/16 2.1/2 1.3/4 13.745855-5/32-100 5/32 100 0.340 3/16 2.1/2 1.3/4 13.745855-5/32-120 5/32 120 0.340 3/16 2.1/2 1.3/4 13.745855-3/16-90 3/16 90 0.360 3/16 2.1/2 1.3/4 15.525855-3/16-100 3/16 100 0.405 3/16 2.1/2 1.3/4 15.525855-3/16-120 3/16 120 0.405 3/16 2.1/2 1.3/4 15.525855-7/32-90 7/32 90 0.440 3/16 2.1/2 1.3/4 16.425855-7/32-100 7/32 100 0.440 3/16 2.1/2 1.3/4 16.425855-7/32-120 7/32 120 0.440 3/16 2.1/2 1.3/4 16.425855-1/4-90 1/4 90 0.470 3/16 2.1/2 1.3/4 17.955855-1/4-100 1/4 100 0.530 3/16 2.1/2 1.3/4 17.955855-1/4-120 1/4 120 0.530 3/16 2.1/2 1.3/4 17.95
PILOTED COUNTERSINKS IMPERIAL M35-HSS-E 5% Cobalt
Pilot diameter tolerance = -0.0005" -0.0015"
Additional angles and sizes are available on request
5855 x 90° / 100° / 120°
9
3 FlutesStraight shank
Pilot Included Body Shank Overall Shank ListCode Diameter Angle Diameter Diameter Length Length Price
inches degrees inches inches inches inches £5801 3/32 90 3/16 3/16 2.1/2 1.3/4 12.955805 3/32 90 1/4 3/16 2.1/2 1.3/4 13.275802 3/32 100 3/16 3/16 2.1/2 1.3/4 12.955806 3/32 100 1/4 3/16 2.1/2 1.3/4 13.275804 3/32 100 3/8 3/16 2.1/2 1.3/4 14.505803 3/32 120 3/16 3/16 2.1/2 1.3/4 12.955807 3/32 120 1/4 3/16 2.1/2 1.3/4 13.275809 1/8 90 1/4 3/16 2.1/2 1.3/4 13.275816 1/8 90 5/16 3/16 2.1/2 1.3/4 13.745825 1/8 90 3/8 3/16 2.1/2 1.3/4 14.505810 1/8 100 1/4 3/16 2.1/2 1.3/4 13.275817 1/8 100 5/16 3/16 2.1/2 1.3/4 13.745811 1/8 100 3/8 3/16 2.1/2 1.3/4 14.505812 1/8 120 1/4 3/16 2.1/2 1.3/4 13.275818 1/8 120 5/16 3/16 2.1/2 1.3/4 13.745826 1/8 120 3/8 3/16 2.1/2 1.3/4 14.505820 5/32 90 5/16 3/16 2.1/2 1.3/4 13.745827 5/32 90 3/8 3/16 2.1/2 1.3/4 14.505821 5/32 100 5/16 3/16 2.1/2 1.3/4 13.745823 5/32 100 3/8 3/16 2.1/2 1.3/4 14.505822 5/32 120 5/16 3/16 2.1/2 1.3/4 13.745828 5/32 120 3/8 3/16 2.1/2 1.3/4 14.505830 3/16 90 3/8 3/16 2.1/2 1.3/4 14.505831 3/16 100 3/8 3/16 2.1/2 1.3/4 14.505832 3/16 120 3/8 3/16 2.1/2 1.3/4 14.505834 3/16 120 7/16 3/16 2.1/2 1.3/4 16.425835 7/32 90 7/16 3/16 2.1/2 1.3/4 16.425837 7/32 100 7/16 3/16 2.1/2 1.3/4 16.425838 7/32 120 7/16 3/16 2.1/2 1.3/4 16.425840 1/4 90 7/16 3/16 2.1/2 1.3/4 16.425843 1/4 90 1/2 3/16 2.1/2 1.3/4 17.635841 1/4 100 7/16 3/16 2.1/2 1.3/4 16.425839 1/4 100 1/2 3/16 2.1/2 1.3/4 17.635842 1/4 120 7/16 3/16 2.1/2 1.3/4 16.425844 1/4 120 1/2 3/16 2.1/2 1.3/4 17.63
PILOTED COUNTERSINKS IMPERIAL M35-HSS-E 5% Cobalt
Pilot diameter tolerance = -0.0005" -0.0015"
Additional sizes and angles are available on request
5801-5844 x 90° / 100° / 120°
10
3 FlutesStraight shank
Pilot Included Body Shank Overall Shank ListCode Diameter Angle Diameter Diameter Length Length Price
mm degrees mm inches inches inches £5845-2.5-90 2.5 90 4.76 3/16 2.5 1.3/4 13.255845-2.5-100 2.5 100 4.76 3/16 2.5 1.3/4 13.255845-2.5-120 2.5 120 4.76 3/16 2.5 1.3/4 13.255845-3.0-90 3.0 90 6.72 3/16 2.5 1.3/4 13.805845-3.0-100 3.0 100 6.72 3/16 2.5 1.3/4 13.805845-3.0-120 3.0 120 6.72 3/16 2.5 1.3/4 13.805845-4.0-90 4.0 90 8.96 3/16 2.5 1.3/4 14.605845-4.0-100 4.0 100 8.96 3/16 2.5 1.3/4 14.605845-4.0-120 4.0 120 8.96 3/16 2.5 1.3/4 14.605845-5.0-90 5.0 90 11.20 3/16 2.5 1.3/4 16.055845-5.0-100 5.0 100 11.20 3/16 2.5 1.3/4 16.055845-5.0-120 5.0 120 11.20 3/16 2.5 1.3/4 16.055845-6.0-90 6.0 90 13.44 3/16 2.5 1.3/4 16.825845-6.0-100 6.0 100 13.44 3/16 2.5 1.3/4 16.825845-6.0-120 6.0 120 13.44 3/16 2.5 1.3/4 16.825845-8.0-90 8.0 90 17.92 3/8 3.12 1.3/4 29.135845-8.0-100 8.0 100 17.92 3/8 3.12 1.3/4 29.135845-8.0-120 8.0 120 17.92 3/8 3.12 1.3/4 29.135845-10.0-90 10.0 90 22.40 3/8 3.12 1.3/4 40.255845-10.0-100 10.0 100 22.40 3/8 3.12 1.3/4 40.255845-10.0-120 10.0 120 22.40 3/8 3.12 1.3/4 40.255845-12.0-90 12.0 90 26.88 3/8 3.12 1.3/4 49.875845-12.0-100 12.0 100 26.88 3/8 3.12 1.3/4 49.875845-12.0-120 12.0 120 26.88 3/8 3.12 1.3/4 49.87
PILOTED COUNTERSINKS METRIC M35-HSS-E 5% Cobalt
Pilot diameter tolerance = -0.0005" -0.0015"
Additional sizes and angles are available on request
5845 x 90° / 100° / 120°
11
3 Flutes
100°Pilot Cutter Number Radius between List
Code Diameter Diameter of Flutes Thread Pilot & Flute Pricemm mm £
S2.38-100-10 2.38 10.00 3 M6x1 0.010”-0.015” 18.20S3.17-100-10 3.17 10.00 3 M6x1 0.015”-0.020” 18.20S3.96-100-10 3.96 10.00 3 M6x1 0.020”-0.025” 18.20S4.76-100-10 4.76 10.00 3 M6x1 0.020”-0.025” 18.20S5.60-100-10 5.60 10.00 3 M6x1 0.020”-0.025” 18.20S4.76-100-14 4.76 14.00 3 M8x1 0.025”-0.030” 22.05S5.00-100-14 5.00 14.00 3 M8x1 0.025”-0.030” 22.05S5.60-100-14 5.60 14.00 3 M8x1 0.025”-0.030” 22.05S6.00-100-14 6.00 14.00 3 M8x1 0.025”-0.030” 22.05S6.35-100-14 6.35 14.00 3 M8x1 0.025”-0.030” 22.05S8.00-100-17 8.00 17.00 3 M8x1 0.035”-0.040” 31.85S9.52-100-21 9.52 21.00 3 M8x1 0.035”-0.040” 33.09S9.60-100-21 9.60 21.00 3 M8x1 0.035”-0.040” 33.09S10.00-100-21 10.00 21.00 3 M8x1 0.035”-0.040” 33.09
WITH 1/4UNF x 28TPI THREADED SHANK
3 Flutes
100°Pilot Cutter Number Decimal Equivalent List
Code Diameter Diameter of Flutes Thread Inches Pricemm mm £
SUNF-3/32-100-3/8 3/32 3/8 3 1/4-28 .0938 13.62SUNF-1/8-100-3/8 1/8 3/8 3 1/4-28 .1250 13.62SUNF-5/32-100-3/8 5/32 3/8 3 1/4-28 .1562 13.62SUNF-3/16-100-3/8 3/16 3/8 3 1/4-28 .1875 13.62SUNF-3/32-100-1/2 3/32 1/2 3 1/4-28 .0938 16.09SUNF-1/8-100-1/2 1/8 1/2 3 1/4-28 .1250 16.09SUNF-3/16-100-1/2 3/16 1/2 3 1/4-28 .1875 16.09SUNF-7/32-100-1/2 7/32 1/2 3 1/4-28 .2188 16.09SUNF-1/4-100-1/2 1/4 1/2 3 1/4-28 .2500 16.09
Image for illustration only
Pilot diameter tolerance = -0.0005" -0.0015"
Additional sizes and angles are available on request
SOLID PILOTED STOP COUNTERSINKS M42-HSS-E 8% CobaltWITH METRIC THREADED SHANK
12
WITH THREADED SHANK
2 & 3 Flutes
100°
Pilot Shank Cutter Number ListCode Diameter Diameter Diameter of Flutes Thread Price
mm mm mm £D2.38-100-10 2.38 2.00 10.00 2 M6x1 19.00D2.50-100-10 2.50 2.00 10.00 2 M6x1 19.00D2.80-100-10 2.80 2.50 10.00 2 M6x1 19.00D3.00-100-10 3.00 2.50 10.00 2 M6x1 19.00D3.17-100-10 3.17 2.50 10.00 2 M6x1 19.00D3.50-100-10 3.50 3.00 10.00 2 M6x1 19.00D4.00-100-10 4.00 3.50 10.00 2 M6x1 19.00D4.17-100-10 4.17 3.50 10.00 2 M6x1 19.00D4.76-100.14 4.76 4.00 14.00 2 M8x1 23.48D4.83-100-14 4.83 4.00 14.00 2 M8x1 23.48D5.00-100-14 5.00 4.00 14.00 2 M8x1 23.48D5.60-100-14 5.60 4.00 14.00 2 M8x1 23.48D6.00-100-14 6.00 4.00 14.00 2 M8x1 23.48D6.35-100-14 6.35 4.00 14.00 2 M8x1 23.48D7.94-100-17 7.94 5.00 17.00 3 M8x1 29.70D8.00-100-17 8.00 5.00 17.00 3 M8x1 29.70D9.52-100-21 9.52 5.00 21.00 3 M8x1 31.25D10.00-100-21 10.00 5.00 21.00 3 M8x1 31.25
DETACHABLE PILOTED COUNTERSINKS M42-HSS-E 8% Cobalt
Pilot diameter tolerance = -0.0005" -0.0015"
Additional sizes and angles are available on request
13
3 FlutesStraight shank
60° Head Small Shank Overall Minimum Minimum ListCode Diameter Diameter Diameter Length Head Length Shank Length Price
mm mm mm mm mm mm £5858-8.0-60 8.0 1.6 8 48 16 32 10.355858-10.0-60 10.0 2.0 8 50 18 32 10.805858-12.5-60 12.5 2.5 8 52 20 32 11.755858-16.0-60 16.0 3.2 10 60 24 36 15.805858-20.0-60 20.0 4.0 10 64 28 36 21.635858-25.0-60 25.0 7.0 10 69 33 36 29.06
82° Head Small Shank Overall Minimum Minimum ListCode Diameter Diameter Diameter Length Head Length Shank Length Price
mm mm mm mm mm mm £5858-8.0-82 8.0 1.6 8 44 12 32 15.005858-10.0-82 10.0 2.0 8 46 11 32 15.435858-12.5-82 12.5 2.5 8 48 12 32 16.905858-16.0-82 16.0 3.2 10 56 13 36 21.525858-20.0-82 20.0 4.0 10 60 15 36 28.365858-25.0-82 25.0 7.0 10 65 16 36 37.29
90° Head Small Shank Overall Minimum Minimum ListCode Diameter Diameter Diameter Length Head Length Shank Length Price
mm mm mm mm mm mm £5858-8.0-90 8.0 1.6 8 44 12 32 9.755858-10.0-90 10.0 2.0 8 46 11 32 10.035858-12.5-90 12.5 2.5 8 48 12 32 10.995858-16.0-90 16.0 3.2 10 56 13 36 14.385858-20.0-90 20.0 4.0 10 60 15 36 19.265858-25.0-90 25.0 7.0 10 65 16 36 25.66
100° Head Small Shank Overall Minimum Minimum ListCode Diameter Diameter Diameter Length Head Length Shank Length Price
mm mm mm mm mm mm £5858-8.0-100 8.0 1.6 8 44 12 32 15.005858-10.0-100 10.0 2.0 8 46 11 32 15.435858-12.5-100 12.5 2.5 8 48 12 32 16.905858-16.0-100 16.0 3.2 10 56 13 36 21.525858-20.0-100 20.0 4.0 10 60 15 36 28.365858-25.0-100 25.0 7.0 10 65 16 36 37.29
METRIC 3 FLUTE COUNTERSINKS M35-HSS-E 5% Cobalt
5858 x 60° / 82° / 90° / 100°
14
3 FlutesStraight shank
60° Head Included Small Shank Overall Minimum ListCode Diameter Angle Diameter Diameter Length Shank Length Price
inches degrees inches inches inches inches £5858-1/4-60 1/4 60 1/32 3/16 1.7/8 1.3/8 9.965858-3/8-60 3/8 60 1/16 1/4 1.7/8 1.1/4 10.745858-1/2-60 1/2 60 3/32 5/16 2 1.1/4 11.955858-5/8-60 5/8 60 7/65 3/8 2.7/16 1.3/8 16.105858-3/4-60 3/4 60 1/8 3/8 2.3/4 1.1/2 20.535858-1-60 1 60 5/32 3/8 3.1/8 1.1/4 29.095858-1.1/4-60 1.1/4 60 3/16 1/2 4 1.1/2 43.38
82° Head Included Small Shank Overall Minimum ListCode Diameter Angle Diameter Diameter Length Shank Length Price
inches degrees inches inches inches inches £5858-1/4-82 1/4 82 1/32 3/16 1.3/4 1.3/8 14.695858-3/8-82 3/8 82 1/16 1/4 1.3/4 1.1/4 15.405858-1/2-82 1/2 82 3/32 5/16 1.7/8 1.1/4 17.005858-5/8-82 5/8 82 7/64 3/8 2.1/4 1.3/8 22.005858-3/4-82 3/4 82 1/8 3/8 2.1/2 1.1/2 27.325858-1-82 1 82 5/32 3/8 2.3/4 1.1/4 37.125858-1.1/4-82 1.1/4 82 3/16 1/2 3.1/4 1.1/2 56.85
90° Head Included Small Shank Overall Minimum ListCode Diameter Angle Diameter Diameter Length Shank Length Price
inches degree inches inches inches inches £5858-1/4-90 1/4 90 1/32 3/16 1.3/4 1.3/8 9.555858-3/8-90 3/8 90 1/16 1/4 1.3/4 1.1/4 10.115858-1/2-90 1/2 90 3/32 5/16 1.7/8 1.1/4 11.225858-5/8-90 5/8 90 7/64 3/8 2.1/4 1.3/8 14.565858-3/4-90 3/4 90 1/8 3/8 2.1/2 1.1/2 18.415858-1-90 1 90 5/32 3/8 2.3/4 1.1/4 26.085858-1.1/4-90 1.1/4 90 3/16 1/2 3.1/4 1.1/2 38.90
100° Head Included Small Shank Overall Minimum List Code Diameter Angle Diameter Diameter Length Shank Length Price
inches degrees inches inches inches inches £5858-1/4-100 1/4 100 1/32 3/16 1.3/4 1.3/8 14.695858-3/8-100 3/8 100 1/16 1/4 1.3/4 1.1/4 15.405858-1/2-100 1/2 100 3/32 5/16 1.7/8 1.1/4 17.005858-5/8-100 5/8 100 7/64 3/8 2.1/4 1.3/8 22.005858-3/4-100 3/4 100 1/8 3/8 2.1/2 1.1/2 27.325858-1-100 1 100 5/32 3/8 2.3/4 1.1/4 37.125858-1.1/4-100 1.1/4 100 3/16 1/2 3.1/4 1.1/2 56.85
3 FLUTE COUNTERSINKS IMPERIAL M35-HSS-E 5% Cobalt
5858 x 60° / 82° / 90° / 100°
15
3 FlutesStraight shank
Head Small Shank Overall Head ListCode Diameter Diameter Diameter Length Length Price
mm mm mm mm mm £335C-4.3-90 4.3 1.2 4 40 3.5 9.37335C-5.3-90 5.3 1.5 4 40 4.0 9.51335C-5.8-90 5.8 1.5 5 45 4.5 9.55335C-6.3-90 6.3 1.5 5 45 5.0 9.55335C-7.3-90 7.3 1.8 6 50 5.6 9.91335C-8.3-90 8.3 2.0 6 50 6.0 9.91335C-9.4-90 9.4 2.2 6 50 6.7 10.19335C-10.0-90 10.0 2.5 6 50 7.1 10.19335C-10.4-90 10.4 2.5 6 50 7.1 10.19335C-11.5-90 11.5 2.8 8 56 7.5 10.86335C-12.4-90 12.4 2.8 8 56 8.0 11.38335C-13.4-90 13.4 2.9 8 56 8.5 12.07335C-15.0-90 15.0 3.2 10 60 9.0 14.36335C-16.5-90 16.5 3.2 10 60 10.0 14.71335C-19.0-90 19.0 3.5 10 63 11.2 18.62335C-20.5-90 20.5 3.5 10 63 12.5 20.38335C-23.0-90 23.0 3.8 10 67 13.2 25.18335C-25.0-90 25.0 3.8 10 67 15.0 26.04335C-26.0-90 26.0 3.8 10 67 15.0 27.99335C-28.0-90 28.0 4.0 12 71 16.0 33.92335C-30.0-90 30.0 4.2 12 71 18.0 35.30335C-31.0-90 31.0 4.2 12 71 18.0 35.30335C-32.0-90 32.0 4.2 12 71 18.0 37.38335C-35.0-90 35.0 6.0 12 73 20.0 115.53335C-40.0-90 40.0 9.0 16 90 34.0 139.06335C-50.0-90 50.0 9.0 16 94 37.0 169.52
334C x 60°3 FlutesStraight shank
Head Small Shank Overall Head ListCode Diameter Diameter Diameter Length Length Price
mm mm mm mm mm £334C-6.3-60 6.3 1.6 5.0 45.0 6.3 10.55334C-8.0-60 8.0 2.0 6.0 50.0 8.0 11.00334C-10.0-60 10.0 2.5 6.0 53.0 10.0 11.50334C-12.5-60 12.5 3.2 8.0 56.0 11.2 12.95334C-16.0-60 16.0 4.0 10.0 63.0 14.0 17.40334C-20.0-60 20.0 5.0 10.0 67.0 17.0 23.85334C-25.0-60 25.0 6.3 10.0 71.0 20.0 30.55
335C x 90°
M35-HSS-E 5% CobaltDIN 3 FLUTE COUNTERSINKS METRIC
16
2 Flutes Straight Shank
Included Head Overall Shank Shank ListCode Angle Diameter Length Diameter Length Price
degrees inches inches inches inches £ 5850-4.0-90 90 4.0 38.0 3.175 19.0 13.275850-5.0-90 90 5.0 38.0 3.175 19.0 13.455850-6.0-90 90 6.0 38.0 4.163 19.0 14.105850-8.0-90 90 8.0 45.0 6.350 19.0 14.905850-10.0-90 90 10.0 45.0 6.350 19.0 15.655850-12.5-90 90 12.5 51.0 9.525 25.5 16.655850-16.0-90 90 16.0 57.0 9.525 25.5 20.495850-20.0-90 90 20.0 66.5 12.700 31.5 25.935850-25.0-90 90 25.0 70.0 12.700 31.5 33.25
2 Flutes Straight Shank
Included Head Overall Shank Shank ListCode Angle Diameter Length Diameter Length Price
degrees inches inches inches inches £ 5850-5.0-? ? 5.0 38.0 3.175 19.0 17.655850-6.0-? ? 6.0 38.0 4.163 19.0 18.585850-8.0-? ? 8.0 45.0 6.350 19.0 19.525850-10.0-? ? 10.0 45.0 6.350 19.0 20.315850-12.5-? ? 12.5 51.0 9.525 25.5 21.915850-16.0-? ? 16.0 57.0 9.525 25.5 27.025850-20.0-? ? 20.0 66.5 12.700 31.5 34.125850-25.0-? ? 25.0 70.0 12.700 31.5 43.73
5850 METRIC x 60° / 80° / 82° / 100° / 120°
CHATTERLESS COUNTERSINKS M35-HSS-E 5% Cobalt
5850 METRIC x 90°
ADDITIONAL ANGLES
17
2 Flutes Straight Shank
Included Head Overall Shank Shank ListCode Angle Diameter Length Diameter Length Price
degrees inches inches inches inches £ 5850-1/8-90 90 1/8 1.1/2 1/8 3/4 13.275850-3/16-90 90 3/16 1.1/2 1/8 3/4 13.275850-1/4-90 90 1/4 1.1/2 3/16 3/4 14.105850-5/16-90 90 5/16 1.3/4 1/4 3/4 14.905850-3/8-90 90 3/8 1.3/4 1/4 3/4 15.655850-7/16-90 90 7/16 2 3/8 1 16.365850-1/2-90 90 1/2 2 3/8 1 16.655850-5/8-90 90 5/8 2.1/4 3/8 1 20.495850-3/4-90 90 3/4 2.5/8 1/2 1.1/4 25.935850-7/8-90 90 7/8 2.3/4 1/2 1.1/4 29.715850-1-90 90 1 2.3/4 1/2 1.1/4 33.25
2 FlutesStraight Shank
Included Head Overall Shank Shank ListCode Angle Diameter Length Diameter Length Price
degrees inches inches inches inches £ 5850-1/8-? ? 1/8 1.1/2 1/8 3/4 17.465850-3/16-? ? 3/16 1.1/2 1/8 3/4 17.465850-1/4-? ? 1/4 1.1/2 3/16 3/4 18.585850-5/16-? ? 5/16 1.3/4 1/4 3/4 19.525850-3/8-? ? 3/8 1.3/4 1/4 3/4 20.315850-7/16-? ? 7/16 2 3/8 1 21.625850-1/2-? ? 1/2 2 3/8 1 21.915850-5/8-? ? 5/8 2.1/4 3/8 1 27.025850-3/4-? ? 3/4 2.5/8 1/2 1.1/4 34.125850-7/8-? ? 7/8 2.3/4 1/2 1.1/4 40.265850-1-? ? 1 2.3/4 1/2 1.1/4 43.73
CHATTERLESS COUNTERSINKS M35-HSS-E 5% Cobalt
ADDITIONAL ANGLES
5850 IMPERIAL x 90°
5850 IMPERIAL 60° / 80° / 82° / 100° / 120°
18
Through hole
Straight shank
5880 METRIC x 90°Head Shank Overall Shank List
Code Diameter Diameter Length Length Pricemm mm mm mm £
5880-10.0-90 10.0 6.0 45 32.0 11.405880-12.5-90 12.5 8.0 48 32.0 12.205880-14.0-90 14.0 8.0 48 30.5 12.655880-16.0-90 16.0 10.0 56 36.0 14.345880-21.0-90 21.0 10.0 65 37.5 21.595880-25.0-90 25.0 10.0 65 36.0 29.105880-28.0-90 28.0 12.0 85 48.0 41.675880-35.0-90 35.0 15.0 102 56.5 78.50
Single flute
Straight shank
5890 METRIC x 90°Head Shank Overall Shank List
Code Diameter Diameter Length Length Pricemm mm mm mm £
5890-4.0-90 4.0 4 44 36.0 11.455890-6.0-90 6.0 5 45 36.0 11.455890-8.0-90 8.0 6 45 32.0 11.905890-10.0-90 10.0 6 45 32.0 12.255890-12.5-90 12.5 8 48 32.0 14.265890-14.0-90 14.0 8 48 30.5 15.955890-16.0-90 16.0 10 56 36.0 17.845890-21.0-90 21.0 10 65 37.5 22.405890-25.0-90 25.0 10 65 36.0 27.905890-28.0-90 28.0 12 85 48.0 41.285890-35.0-90 35.0 15 102 56.5 78.49
SINGLE FLUTE COUNTERSINKS
DEBURRING TOOLS M35-HSS-E 5% Cobalt
M35-HSS-E 5% Cobalt
19
Through hole
Straight shank
Head Shank Overall Shank ListCode Diameter Diameter Length Length Price
inches inches inches inches £5880-5/16-90 5/16 1/4 1.3/4 1.1/4 11.365880-3/8-90 3/8 1/4 1.3/4 1.1/4 11.645880-1/2-90 1/2 5/16 1.7/8 1.1/4 12.455880-5/8-90 5/8 3/8 2.1/4 1.3/8 15.155880-3/4-90 3/4 3/8 2.1/2 1.1/2 19.785880-1-90 1 3/8 2.3/4 1.1/4 27.325880-1.1/4-90 1.1/4 1/2 3.1/4 1.1/2 49.19
Through holeStraight shank
Head Shank Overall Shank ListCode Diameter Diameter Length Length Price
inches inches inches inches £
5880-5/16-? 5/16 1/4 1.3/4 1.1/4 16.805880-3/8-? 3/8 1/4 1.3/4 1.1/4 17.225880-1/2-? 1/2 5/16 1.7/8 1.1/4 18.235880-5/8-? 5/8 3/8 2.1/4 1.3/8 22.325880-3/4-? 3/4 3/8 2.1/2 1.1/2 29.255880-1-? 1 3/8 2.3/4 1.1/4 40.025880-1.1/4-? 1.1/4 1/2 3.1/4 1.1/2 71.78
DEBURRING TOOLS M35-HSS-E 5% Cobalt
5880 IMPERIAL x 60° / 82° / 100°
ADDITIONAL ANGLES
5880 IMPERIAL x 90°
20
Single fluteStraight shank
Head Shank Overall Shank ListCode Diameter Diameter Length Length Price
inches inches inches inches £5890-1/4-90 1/4 3/16 1.3/4 1.3/8 11.485890-5/16-90 5/16 1/4 1.3/4 1.1/4 11.905890-3/8-90 3/8 1/4 1.3/4 1.1/4 12.255890-1/2-90 1/2 5/16 1.7/8 1.1/4 14.255890-5/8-90 5/8 3/8 2.1/4 1.3/8 17.845890-3/4-90 3/4 3/8 2.1/2 1.1/2 22.405890-1-90 1 3/8 2.3/4 1.1/4 27.905890-1.1/4-90 1.1/4 1/2 3.1/4 1.1/2 47.00
Single fluteStraight shank
Head Shank Overall Shank ListCode Diameter Diameter Length Length Price
inches inches inches inches £5890-1/4-? 1/4 3/16 1.3/4 1.3/8 16.505890-5/16-? 5/16 1/4 1.3/4 1.1/4 17.055890-3/8-? 3/8 1/4 1.3/4 1.1/4 17.455890-1/2-? 1/2 5/16 1.7/8 1.1/4 19.955890-5/8-? 5/8 3/8 2.1/4 1.3/8 24.275890-3/4-? 3/4 3/8 2.1/2 1.1/2 28.605890-1-? 1 3/8 2.3/4 1.1/4 37.195890-1.1/4-? 1.1/4 1/2 3.1/4 1.1/2 62.89
5890 IMPERIAL x 60° / 82° / 100°
ADDITIONAL ANGLES
5890 IMPERIAL x 90°
SINGLE FLUTE COUNTERSINKS M35-HSS-E 5% Cobalt
21
3 FlutesMorse taper shank
60°Head Small Morse Overall Minimum List
Code Diameter Diameter Taper Shank Length Head Length Pricemm mm No. mm mm £
5859-16.0-60 16.0 3.2 1 97 21 36.855859-20.0-60 20.0 4.0 2 120 28 50.955859-25.0-60 25.0 7.0 2 125 31 62.455859-31.5-60 31.5 9.0 2 132 40 87.085859-40.0-60 40.0 12.5 3 160 43 140.685859-50.0-60 50.0 16.0 3 165 47 238.585859-63.0-60 63.0 20.0 4 200 49 345.165859-80.0-60 80.0 25.0 4 215 59 507.54
82°Head Small Morse Overall Minimum List
Code Diameter Diameter Taper Shank Length Head Length Pricemm mm No. mm mm £
5859-16.0-82 16.0 3.2 1 93 18 40.905859-20.0-82 20.0 4.0 2 116 25 56.405859-25.0-82 25.0 7.0 2 121 27 69.495859-31.5-82 31.5 9.0 2 124 31 97.335859-40.0-82 40.0 12.5 3 150 33 149.895859-50.0-82 50.0 16.0 3 153 35 249.725859-63.0-82 63.0 20.0 4 185 40 369.825859-80.0-82 80.0 25.0 4 196 44 548.51
90°Head Small Morse Overall Minimum List
Code Diameter Diameter Taper Shank Length Head Length Pricemm mm No. mm mm £
5859-16.0-90 16.0 3.2 1 93 18 36.855859-20.0-90 20.0 4.0 2 116 25 50.955859-25.0-90 25.0 7.0 2 121 27 62.455859-31.5-90 31.5 9.0 2 124 31 87.085859-40.0-90 40.0 12.5 3 150 33 140.685859-50.0-90 50.0 16.0 3 153 35 238.585859-63.0-90 63.0 20.0 4 185 40 345.165859-80.0-90 80.0 25.0 4 196 44 507.54
MORSE TAPER COUNTERSINKS M35-HSS-E 5% Cobalt
Additional sizes and angles are also available on request
5859 x 60° / 82° / 90°
22
6 flutesStraight shank
5852 x 90°Head Included Overall Shank Shank List
Code Diameter Angle Length Diameter Length Priceinches degrees inches inches inches £
5852-1/2-90 1/2 90 1.9/16 1/4 7/8 8.43
6 flutesStraight shank
5853 x 90° Head Included Overall Shank Shank List
Code Diameter Angle Length Diameter Length Priceinches degrees inches inches inches £
5853-3/8-90 3/8 90 2 3/16 1.675 7.545853-1/2-90 1/2 90 2 3/16 1.675 8.915853-5/8-90 5/8 90 2 1/4 1.675 11.35
6 flutesStraight shank
5853 x 120° Head Included Overall Shank Shank List
Code Diameter Angle Length Diameter Length Priceinches degrees inches inches inches £
5853-3/8-120 3/8 120 2 3/16 1.675 10.605853-1/2-120 1/2 120 2 3/16 1.675 11.965853-5/8-120 5/8 120 2 1/4 1.675 14.41
6 flutes Straight shank
5854 HEAVY DUTY x 90°Head Included Overall Shank Shank List
Code Diameter Angle Length Diameter Length Priceinches degrees inches inches inches £
5854-1/2-90 1/2 90 2 3/8 1.3/8 13.505854-5/8-90 5/8 90 2 1/2 1.3/8 16.195854-3/4-90 3/4 90 2.1/4 1/2 1.3/8 20.815854-1-90 1 90 2.1/2 1/2 1.3/8 27.47
ROSE COUNTERSINKS M35-HSS-E 5% Cobalt
23
5 FlutesStraight shank
DIN 335A x 90° Head Small Shank Number Overall Head List
Code Diameter Diameter Diameter of Flutes Length Length Pricemm mm mm mm mm £
335A-8.0-90 8.0 0.5 8 5 48 - 14.32335A-12.5-90 12.5 2.0 8 5 48 16 15.18335A-16.0-90 16.0 3.2 10 6 56 20 17.52335A-20.0-90 20.0 5.0 10 6 60 24 21.60335A-25.0-90 25.0 5.0 10 6 68 30 27.49
DIN 334A x 60°
5 & 6 FlutesStraight shank
Head Small Shank Number Overall Head ListCode Diameter Diameter Diameter of Flutes Length Length Price
inches mm mm mm mm £334A-8.0-60 8.0 0.5 8 5 50 - 15.59334A-12.5-60 12.5 2.0 8 5 50 18 17.52334A-16.0-60 16.0 3.2 10 6 60 24 20.07334A-20.0-60 20.0 5.0 10 6 63 27 24.36
ROSE COUNTERSINKS M35-HSS-E 5% Cobalt
24
Standard Metric Counterbores3 flutes – Straight shank
5760 METRICCap Head Pilot Head Shank Overall List
Code Size Size Size Size Length Pricemm mm mm mm mm £
5760-M3 M3 3.4 6.0 5.0 71 16.515760-M3.5 M3.5 3.9 6.5 5.0 71 16.515760-M4 M4 4.5 8.0 5.0 71 16.925760-M5 M5 5.5 10.0 8.0 80 17.465760-M6 M6 6.4 11.0 8.0 80 18.805760-M8 M8 9.0 15.0 12.5 100 24.625760-M10 M10 11.0 18.0 12.5 100 31.875760-M12 M12 14.0 20.0 12.5 100 36.43
5760 IMPERIAL
Standard Imperial Counterbores3 flutes – Straight shank
Pilot Head Shank Head Over Length List Diameter Diameter Diameter Length Inc. Pilot Price inches inches inches inches inches £
5760-1/8-1/4 1/8 1/4 3/8 3/8 3.15/16 16.715760-3/16-5/16 3/16 5/16 3/8 7/16 4.3/16 17.395760-3/16-3/8 3/16 3/8 3/8 1/2 4.7/16 18.025760-1/4-3/8 1/4 3/8 3/8 1/2 4.1/2 18.675760-1/4-7/16 1/4 7/16 1/2 5/8 4.3/4 20.205760-1/4-1/2 1/4 1/2 1/2 3/4 5 20.745760-5/16-7/16 5/16 7/16 1/2 5/8 4.13/16 21.365760-5/16-1/2 5/16 1/2 1/2 3/4 5.1/8 21.955760-3/8-9/16 3/8 9/16 1/2 1.3/16 5.3/4 26.32
PLAIN SHANK COUNTERBORES M35-HSS-E 5% Cobalt
25
Close fit, 1/64" Clearance and 1/32" Clearance3 flutes – Straight shank
5770Cap Screw Pilot Head Shank Overall List
Code Size Size Size Size Length Priceinches inches inches inches £
5770-4-Close Fit #4 0.112 0.186 5/32 3.0 16.515770-4-1/64 Over #4 0.127 0.202 5/32 3.0 16.515770-4-1/32 Over #4 0.143 0.217 5/32 3.0 16.515770-5-Close Fit #5 0.125 0.205 3/16 3.0 16.585770-5-1/64 Over #5 0.140 0.221 3/16 3.0 16.585770-5-1/32 Over #5 0.156 0.237 3/16 3.0 16.585770-6-Close Fit #6 0.138 0.228 7/32 3.0 16.635770-6-1/64 Over #6 0.153 0.244 7/32 3.0 16.635770-6-1/32 Over #6 0.169 0.260 7/32 3.0 16.635770-8-Close Fit #8 0.164 0.272 1/4 3.0 17.165770-8-1/64 Over #8 0.179 0.288 1/4 3.0 17.165770-8-1/32 Over #8 0.195 0.304 1/4 3.0 17.165770-10-Close Fit #10 0.190 0.314 9/32 4.5 17.845770-10-1/64 Over #10 0.205 0.330 9/32 4.5 17.845770-10-1/32 Over #10 0.221 0.346 9/32 4.5 17.845770-1/4-Close Fit 1/4 0.250 0.382 5/16 4.5 19.765770-1/4-1/64 Over 1/4 0.265 0.398 5/16 4.5 19.765770-1/4-1/32 Over 1/4 0.281 0.414 5/16 4.5 19.765770-5/16-Close Fit 5/16 0.312 0.475 3/8 4.5 22.005770-5/16-1/64 Over 5/16 0.328 0.491 3/8 4.5 22.005770-5/16-1/32 Over 5/16 0.343 0.507 3/8 4.5 22.005770-3/8-Close Fit 3/8 0.375 0.572 1/2 5.0 29.195770-3/8-1/64 Over 3/8 0.390 0.588 1/2 5.0 29.195770-3/8-1/32 Over 3/8 0.406 0.604 1/2 5.0 29.195770-7/16-Close Fit 7/16 0.437 0.663 1/2 5.0 39.165770-7/16-1/64 Over 7/16 0.452 0.679 1/2 5.0 39.165770-7/16-1/32 Over 7/16 0.468 0.695 1/2 5.0 39.165770-1/2-Close Fit 1/2 0.500 0.757 1/2 6.0 49.545770-1/2-1/64 Over 1/2 0.515 0.773 1/2 6.0 49.545770-1/2-1/32 Over 1/2 0.531 0.789 1/2 6.0 49.545770-5/8-1/64 Over 5/8 0.641 0.961 5/8 6.0 63.175770-5/8-Close Fit 5/8 0.625 0.945 5/8 6.0 63.175770-5/8-1/32 Over 5/8 0.656 0.977 5/8 6.0 63.175770-3/4-Close Fit 3/4 0.766 1.187 3/4 7.0 89.925770-3/4-1/32 Over 3/4 0.781 1.203 3/4 7.0 89.925770-7/8-Close Fit 7/8 0.891 1.375 7/8 7.0 107.485770-7/8-1/32 Over 7/8 0.906 1.391 7/8 7.0 107.485770-1-Close Fit 1.0 1.016 1.562 1.0 7.0 138.585770-1-1/32 Over 1.0 1.032 1.588 1.0 7.0 138.58
PLAIN SHANK COUNTERBORES M35-HSS-E 5% Cobalt
26
335C x 90°
3 FlutesStraight shank
ListPrice
Code Sizes included (mm) £335C-SET.A 6.3 12.4 20.5 41.31335C-SET.B 8.3 12.4 16.5 25.0 92.03335C-SET.C 6.3 8.3 10.4 12.4 16.5 20.5 76.11335C-SET.D 6.3 8.3 10.4 12.4 16.5 20.5 25.0 132.15
5858 METRIC x 90°
3 FlutesStraight shank
ListPrice
Code Sizes included (mm) £5858-SET.A 8.0 12.5 20.0 40.005858-SET.B 8.0 12.5 16.0 25.0 60.785858-SET.C 8.0 10.0 12.5 16.0 20.0 25.0 90.06
5880 METRIC x 90°
Through holeStraight shank
ListPrice
Code Sizes included (mm) £5880-SET.A 10.0 14.0 21.0 28.0 87.315880-SET.B 10.0 12.5 16.0 21.0 59.53
COUNTERSINK SETS M35-HSS-E 5% Cobalt
27
COUNTERSINK SETS
5858 IMPERIAL x 90°
3 Flutes
Straight shankList
PriceCode Sizes included (inches) £
5858-90.SET1 1/4 1/2 3/4 39.175858-90.SET2 1/4 5/8 1 50.195858-90.SET3 1/4 1/2 3/4 1 65.265858-90.SET4 3/8 1/2 3/4 1 65.825858-90.SET5 1/4 3/8 1/2 5/8 3/4 1 89.935858-90.SET6 1/4 3/8 1/2 5/8 3/4 1 1.1/4 128.82
5890 IMPERIAL x 90°
Single flute
Straight shankList
PriceCode Sizes included (inches) £
5890-90.SET1 1/4 1/2 3/4 48.135890-90.SET2 1/4 5/8 1 57.225890-90.SET3 1/4 3/8 5/8 1 69.475890-90.SET4 5/16 1/2 3/4 1.1/4 95.555890-90.SET5 1/4 3/8 1/2 5/8 3/4 1 106.11
5880 IMPERIAL x 90°
Through hole
Straight shank
ListPrice
Code Sizes included (inches) £
5880-90.SET1 3/8 1/2 3/4 43.875880-90.SET2 3/8 5/8 1 54.125880-90.SET3 5/16 1/2 3/4 1 70.915880-90.SET4 5/16 1/2 3/4 1.1/4 92.78
M35-HSS-E 5% Cobalt
28