A Free Project SheetNOT FOR RESALE

Finished Quilt Size: 57” x 61”49 West 37th Street, 14th floor, New York, NY 10018

Toll Free: 800-294-9495fax: 212-679-4578

www.blankquilting.net

Quilt 2By Tana Mueller

Skill Level: Advanced Beginner

Qui

lt D

esig

n by

Hei

di P

ridem

ore

Thin Red LineThin Red Line

Thin Red Line

Fabrics in the Thin Red Line Collection

Select Fabrics from the Urban Legend Collection

Finished Quilt Size: 57” x 61”Quilt 2

Panel with Flag - Red9318P-88

Panel with Fireman - Red9319P-88

Dalmatian - White9320-01

Dalmatian - Gray9320-90

Fire Engines - Charcoal9321-99

Maltese Cross - Red9322-88

Stripe - Gray9323-90

Fire Hose - Charcoal9324-99

Bricks - Red9325-88

Toile - Gray9326-90

Flames - Red9327-88

Words - White9328-01

Urban Legend - White7101-01

Urban Legend - Red7101-88

Urban Legend - Gray7101-90

Urban Legend - Charcoal7101-99

Thin Red Line Quilt 2Page 1

Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

Fig. 2

Fig. 1

Materials1 panel Panel with Flag - Red (A) 9318P-88¾ yard Urban Legend - Charcoal (B) 7101-99⅝ yard Urban Legend - Gray (C) 7101-90½ yard Toile - Gray (D) 9326-90½ yard Dalmatian - White (E) 9320-01¼ yard Urban Legend - White (F) 7101-011 ½ yards Bricks - Red (G) 9325-88¾ yard Urban Legend - Red (H) 7101-88*1 yard Dalmatian - Gray (I) 9320-90¼ yard Fire Engines - Charcoal (J) 9321-993 ¾ yards Maltese Cross - Red (Backing) 9322-88

*Includes binding

From the Panel with Flag - Red (A), fussy cut:• (1) 15” x 21 ½” panel centered on the helmet, flag and boots.• (1) 20 ¼” x 11” panel centered on the flag.• (3) 6 ½” blocks.

From the Urban Legend - Charcoal (B), cut:• (2) 2” x 21 ½” WOF strips.• (1) 2 ½” x WOF strip. Sub-cut (2) 2 ½” x 18” strips.• (2) 2” x WOF strips. Sub-cut (2) 2” x 23 ¼” strips and (2) 2” x 11” strips.• (1) 2” x WOF strip. Sub-cut (2) 2” x 9 ½” strips and (2) 2” x 6 ½” strips.• (1) 2 ½” x WOF strip. Sub-cut (2) 2 ½” x 16 ½” strips.• (2) 2 ½” x WOF strips. Sub-cut (4) 2 ½” x 20 ½” strips.• (1) 2 ½” x WOF strip. Sub-cut (2) 2 ½” x 12 ½” strips.

From the Urban Legend - Gray (C), cut:• (1) 1 ⅝” x WOF strip. Sub-cut (2) 1 ⅝” x 13” strips.• (2) 2 ¼” x 24 ½” WOF strips.• (1) 2” x WOF strip. Sub-cut (4) 2” x 6 ½” strips.• (1) 2” x WOF strip. Sub-cut (4) 2” x 9 ½” strips.• (2) 2 ⅞” x WOF strips. Sub-cut (27) 2 ⅞” squares. From the Toile - Gray (D), cut:• (1) 16 ½” square.

From the Dalmatian - White (E), cut:• (1) 12 ½” x 16 ½” WOF strip.

From the Urban Legend - White (F), cut:• (2) 2 ⅞” x WOF strips. Sub-cut (27) 2 ⅞” squares.

From the Bricks - Red (G), cut:• (2) 2” x 48 ½” Length of Fabric (LOF) strips. (CUT FIRST)• (2) 2” x 47 ½” WOF strips from the remaining fabric, piece as needed.• (27) 2 ⅞” squares from the remaining fabric.

From the Urban Legend - Red (H), cut:• (2) 2 ⅞” x WOF strips. Sub-cut (27) 2 ⅞” squares.• (6) 2 ½” x WOF strips for the binding.

From the Dalmatian - Gray (I), cut:• (3) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 51 ½” strips.• (3) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 47 ½” strips.

From the Fire Engines - Charcoal (J), cut:• (1) 5 ½” x WOF strip. Sub-cut (4) 5 ½” squares.

From the Maltese Cross - Red (Backing), cut:• (2) 65” x WOF strips for the backing. Sew the strips together and trim to make the 65” x 69” back.

A(Hat & Cross)

B

B

B BTrim blockto measure

16 ½” x 24 ½”after adding

borders

Block Onemake1

A (Flag)

B

B B

B Trim blockto measure22 ¼” x 13”after addingborders

Unit 1

Sewing Instructions1. Sew (1) 2” x 21 ½” Fabric B strip to each side of the 15” x 21 ½” Fabric A helmet, flag and boots panel. Sew (1) 2 ½” x 18” Fabric B strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 16 ½” x 24 ½” to make (1) Block One rectangle (Fig. 1).

2. Sew (1) 2” x 11” Fabric B strip to each side of the 20 ¼” x 11” flag Fabric A panel. Sew (1) 2” x 23 ¼” Fabric B strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 22 ¼” x 13” to make (1) Unit 1 block (Fig. 2).

Thin Red Line Quilt 2Page 2

Fig. 5

Fig. 6

Fig. 7

Fig. 8 Fig. 9 Fig. 10

Fig. 11 Fig. 12 Fig. 13

AB B

B

B

Trim blockto measure8 ½” x 8 ½”after addingborders

Block Threemake 1

AC C

C

C

Trim blockto measure8 ½” x 8 ½”after addingborders

Block Fourmake 2

DB B

B

B

Block Fivemake 1

B

B

B B

Block Sixmake 1

E

Fig. 4

Fig. 3

Unit 1

C

C

C C

Block Two3. Sew (1) 1 ⅝” x 13” Fabric C strip to each side of the Unit 1 block. Sew (1) 2 ¼” x 24 ½” Fabric C strip to the top and to the bottom of the Unit 1 block to make (1) Block Two rectangle (Fig. 3).

4. Sew (1) 2” x 6 ½” Fabric B strip to each side of (1) 6 ½” Fabric A block. Sew (1) 2” x 9 ½” Fabric B strip to the top and to the bottom of the Fabric A block. Trim the block to measure 8 ½” square to make (1) Block Three square (Fig. 4).

5. Sew (1) 2” x 6 ½” Fabric C strip to each side of (1) 6 ½” Fabric A block. Sew (1) 2” x 9 ½” Fabric C strip to the top and to the bottom of the Fabric A block. Trim the block to measure 8 ½” square to make (1) Block Four square (Fig. 5). Repeat to make a second Block Four square.

6. Sew (1) 2 ½” x 16 ½” Fabric B strip to each side of (1) 16 ½” Fabric D square. Sew (1) 2 ½” x 20 ½” Fabric B strip to the top and to the bottom of the Fabric D square to make (1) Block Five square (Fig. 6).

7. Sew (1) 2 ½” x 12 ½” Fabric B strip to each side of the 16 ½” x 12 ½” Fabric E strip. Sew (1) 2 ½” x 20 ½” Fabric B strip to the top and to the bottom of the Fabric E strip to make (1) Block Six rectangle (Fig. 7).

8. Place (1) 2 ⅞” Fabric F square on top of (1) 2 ⅞” Fabric G square, right sides together. Draw a line across the diagonal of the top square from the upper left corner to the lower right corner (Fig. 8). Sew ¼” away from each side of the drawn diagonal line (Fig. 8). Cut the (2) squares apart on the drawn diagonal line (Fig. 9) to make (2) half-square triangles. Trim the blocks to measure 2 ½” square to make (2) Unit 2 blocks (Fig. 10). Repeat to make (54) Unit 2 blocks total.

FG

Unit 2make 54

HC

Unit 3make 54

9. Place (1) 2 ⅞” Fabric H square on top of (1) 2 ⅞” Fabric C square, right sides together. Draw a line across the diagonal of the top square from the upper right corner to the lower left corner (Fig. 11). Sew ¼” away from each side of the drawn diagonal line (Fig. 11). Cut the (2) squares apart on the drawn diagonal line (Fig. 12) to make (2) half-square triangles. Trim the blocks to measure 2 ½” square to make (2) Unit 3 blocks (Fig. 13). Repeat to make (54) Unit 3 blocks total.

Thin Red Line Quilt 2Page 3

Fig. 14

Fig. 15

Fig. 16

Fig. 17 Fig. 18

Quilt Top Assembly (Refer to the Quilt Layout while assembling.)15. Sew (1) Block Nine strip to the right side of the Block One rectangle. Sew (1) Block Eight strip to the bottom of the Block One rectangle to make the Upper Left block.

16. Sew (1) Block Seven strip to the bottom of the Block Two rectangle. Sew (1) Block Four square to each side of the Block Three square. Sew this strip to the bottom of the Block Seven strip to the Upper Right block.

17. Sew (1) Block Ten strip to the left side of the Block Six rectangle. Sew (1) Block Seven strip to the top of the Block Six rectangle to make the Lower Right block.

18. Sew the Upper Left block to the left side of the Upper Right block to make the top row. Sew the Block Five square to the left side of the Lower Right block to make the bottom row. Sew the (2) rows together to make the Center Block.

19. Sew (1) 2” x 48 ½” Fabric G strip to each side of the Center Block. Sew (1) 2” x 47 ½” Fabric G strip to the top and to the bottom of the Center Block.

20. Sew (1) 5 ½” x 51 ½” Fabric I strip to each side of the Center Block. Sew (1) 5 ½” Fabric J square to each end of (1) 5 ½” x 47 ½” Fabric I strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block to make the quilt top.

21. Layer and quilt as desired.

22. Sew the (6) 2 ½” x WOF Fabric H strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

23. Bind as desired.

Unit 4make 27

Unit 3

Unit 3

Unit 2

Unit 2

Block Sevenmake 2

Unit4

Unit4

Unit4

Unit4

Unit4

Unit4

Block Eightmake 1

Unit4

Unit4

Unit4

Unit4

Unit4

Block Ninemake 1

Unit4

Unit4

Unit4

Unit4

Unit4

Unit4

Block Tenmake 1

Unit4

Unit4

Unit4

Unit4

10. Sew together (2) Unit 2 blocks and (2) Unit 3 blocks as shown in Figure 14 to make (1) Unit 4 block. Repeat to make (27) Unit 4 blocks total.

11. Sew (6) Unit 4 blocks together to make (1) Block Seven strip (Fig. 15). Repeat to make a second Block Seven strip.

12. Sew (5) Unit 4 blocks together to make (1) Block Eight strip (Fig. 16).

13. Sew (6) Unit 4 blocks together to make (1) Block Nine strip (Fig. 17).

14. Sew (4) Unit 4 blocks together to make (1) Block Ten strip (Fig. 18).

©2017 Blank Quilting Corp.

Thin Red Line Quilt 2

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.blankquilting.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

Page 4

Quilt Layout

G

G G

G

J J

J J

I

I

I I

12

34

5 6

7

78

9

10

4