tank automated corrosion mapping 20110817 v01

2
 TechCorr USA LLC © (Uncontrolled Copy Printed: August 17, 2011) Automated Corrosion Mapping is an ultrasonic technique utilized to scan one hundred percent of a steel surface to locate, size and document damage associated with the equipment being inspected. Applications include in-service scanning of vessels, tank walls, frac towers, drums, steel plate, in-line inspection validations and numerous other applications. The AUT system consists of a multi-channel digital meter, robotic scanning system, manual scanner, multiple transducers and laptop with acquisition software. The technology uses single pulse echo transducers and/or multiple angle pulse echo transducer configurations to locate and identify nearly any type of damage mechanism such as basic corrosion or erosion, hydrogen induced cracking, stepwise cracking, stress corrosion cracking, laminations and much more. It's primary application is to collect and image data in real-time and to store this data in electronic format. Due to it's repeatability continued monitoring of critical flaw growth can be performed. Finally the ability to document and visually present the defect size and morphology is extremely important when communicating with the client and when supporting government reporting/compliance issues.    A   u    t    o    m    a    t    e    d    C    o    r    r    o    s    i    o    n    M    a    p    p    i    n    g Software & Calculations The software utilized with the corrosion mapping system allows for defect sizing of length, width, depth and orientation. The system also integrates remaining strength calculations (RSTRENG, B31G) Vessel Scanning Rick Graves 1485 E. Sam Houston S. Pasadena, Texas 77503 USA +1 877-562-0912 (Tel) +1 (512) 413-8000 (Cell) +1.713-524-3461 (Fax) [email protected] Productivity A two man crew using the automated ultrasonic testing (AUT) technique is capable of achieving nearly five-hundred square feet of surface area when performing corrosion mapping

Upload: gmitsuta

Post on 06-Apr-2018

222 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Tank Automated Corrosion Mapping 20110817 v01

8/2/2019 Tank Automated Corrosion Mapping 20110817 v01

http://slidepdf.com/reader/full/tank-automated-corrosion-mapping-20110817-v01 1/2

echCorr USA LLC © (Uncontrolled Copy Printed: August 17, 2011)

Automated Corrosion Mapping is an ultrasonictechnique utilized to scan one hundred percentof a steel surface to locate, size and documentdamage associated with the equipment beinginspected. Applications include in-servicescanning of vessels, tank walls, frac towers,drums, steel plate, in-line inspection validationsand numerous other applications.

The AUT system consists of a multi-channel

digital meter, robotic scanning system, manualscanner, multiple transducers and laptop withacquisition software.

The technology uses single pulse echotransducers and/or multiple angle pulse echotransducer configurations to locate and identifynearly any type of damage mechanism such asbasic corrosion or erosion, hydrogen inducedcracking, stepwise cracking, stress corrosioncracking, laminations and much more.

It's primary application is to collect and imagedata in real-time and to store this data inelectronic format. Due to it's repeatabilitycontinued monitoring of critical flaw growth canbe performed. Finally the ability to document andvisually present the defect size and morphologyis extremely important when communicating withthe client and when supporting governmentreporting/compliance issues.

   A  u   t   o   m   a

   t   e   d   C   o   r   r   o   s

   i   o   n   M   a   p   p   i   n

   g

Software & CalculationsThe software utilized with thecorrosion mapping system allows fordefect sizing of length, width, depthand orientation. The system alsointegrates remaining strengthcalculations (RSTRENG, B31G) Vessel Scanning 

Rick Graves1485 E. Sam Houston S.Pasadena, Texas 77503

USA

+1 877-562-0912 (Tel)+1 (512) 413-8000 (Cell)+1.713-524-3461 (Fax)

[email protected]

Productivity

A two man crew using the automatultrasonic testing (AUT) technique capable of achieving nearly five-hundrsquare feet of surface area whperforming corrosion mapping

Page 2: Tank Automated Corrosion Mapping 20110817 v01

8/2/2019 Tank Automated Corrosion Mapping 20110817 v01

http://slidepdf.com/reader/full/tank-automated-corrosion-mapping-20110817-v01 2/2

TechCorr USA LLC © (Printed: August 17, 2011)

Contact Information

United States Eastern Hemisphere India Region Middle East Latin America

Rick Graves1485 E. Sam Houston S.Pasadena, Texas 77503

USA

+1 877-562-0912 (Tel)+1 (512) 413-8000 (Cell)+1.713-524-3461 (Fax)

[email protected]

Gary Penney

+44 758 001 1145 (Tel)[email protected]

TechCorr India Pvt. Ltd.

B-16, Niraj Ind. Estate,

Opp. Sun Pharma,

Off Mahakali Caves Road,

Andheri (E),

Mumbai 400093

Phone: +91 22 42151568/70

Fax : +91 22 42151569

e-mail:[email protected]

PO Box 33229Abu Dhabi

UAE

+44 758 001 1145 (Tel)[email protected]

Omar Hernandez1485 E. Sam Houston SPasadena, Texas 77053

USA

+1.713-524-2768 (Tel)+1.713-524-3461 (Fax)

[email protected]

For additional office locations within the USA, Canada, Latin America, Middle East Africa, and Asia please visit our websitewww.techcorr.com