tag: engineer: project: contractor: location: architect ... · calibrated and tested in accordance...

Tag:

Project:

Location:

Date:

Engineer:

Contractor:

Architect:

Submitted by:

AUTOMATIC AIRFLOW BALANCING • 1985 CARROLL ST. • CLEARWATER, FL 33765 • 727.441.2651 • www.airflowbalancing.com

Standard Construction:FRAME: Reinforced UL 94 Thermoplastic ResinsBLADE: Reinforced UL 94 Thermoplastic ResinsBEARINGS: Hydraulic blade dampener for extremely quiet operationOUTER SEAL: Removable rubber gasket-type around circumference of damper SPRING: Stainless steel leaf typeTEMPERATURE RANGE: 25°F (-4°C) to 150°F (65°C)ANTI-MICROBIAL AGENT: Steri-Balance™ infused into plasticADAPTER: Quick-connect adapter ring for square ducts included

Application:The ABV Automatic Balancing Valve maintains a constant airflow volume in HVAC applications. The highly engineered damper blade is calibrated to automatically adjust to varying pressures using physics, not electricity, making the ABV truly pressure independent.

The ABV can be used in any HVAC application where a precise vol-ume of air (CFM) is required regardless of varying static pressures. The ABV can be used in both supply and exhaust applications.

Submittal - Model ABV - 030118As part of our continuous improvement program, we reserve the right to make further improvements without notice.1

R38089

AIRFLOW ADJUSTER: Hand-operated manual set-point adjuster (no tools needed)PRESSURE OPERATING RANGE: 0.2" WC (50 Pa) to 2.0" WC (498 Pa)UL STANDARD MET: Classified by UL to UL 2043 for heat and visible smoke release (UL File R38089)ACCURACY: +/- 10% of set CFM

Model ABVPressure Independent AutomaticBalancing Valve

Model Diameter*Individual

Manual Set PointsAirflow Range

(CFM)**

ABV-4 4" (102) 20 25 to 130

ABV-5 5" (127) 20 25 to 130

ABV-6 6" (152) 24 50 to 275

Airflow Range by Model Size:

*Dimensions shown in inches, parentheses () indicate millimeters.

Performance:

Square/Rectangular to Round Transition (see page 5)

Grille Mount Box with Flange (see page 6)

ABV & UL Fire Damper Assembly (see page 7)

ABV & Wood Truss Ceiling Radiation Damper in Rated Boot Assembly (see pages 8-9)

Configurations Available:

**Note: Airflow range determined through +/- 10% of average airflow over 0.2" to 2" W.C.



PERFORMANCE DATA - Model ABVPressure Independent AutomaticBalancing Valve

Performance Notes:• Units tested in accordance with AMCA 500-D-12 - Figure 5.1.

PL-1 PL-2 PL-410D min.

D ± 0.02D

PL-Z

Device BeingTested

Ps4

To Exhaust System & Flow MeasuringSection

CFM

CFM 30

CFM 35

CFM 45

CFM 50

CFM 60

CFM 75

CFM 105

CFM 125

CFM 90

140.0

120.0

100.0

80.0

60.0

40.0

20.0

0.00.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00

MODEL ABV-4

PRESSURE (inches/WG)

SET POINTS

CFM

CFM 30

CFM 35

CFM 45

CFM 50

CFM 60

CFM 75

CFM 105

CFM 125

CFM 90

140.0

120.0

100.0

80.0

60.0

40.0

20.0

0.00.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00

MODEL ABV-5


SET POINTS

300.0

250.0

200.0

150.0

100.0

50.0

0.00.25 0.50 0.75 1.00 1.25 1.50 1.75

MODEL ABV-6


CFM 60

CFM 75

CFM 90

CFM 105

CFM 120

CFM 135

CFM 180

CFM 205

CFM 150

CFM 240

CFM

SET POINTS




*Dimensions shown in inches, parentheses () indicate millimeters. **Weight shown in lbs., parentheses () indicate kilograms.

Calibration:• Each ridge of the set-point adjustment indicator has been laboratory calibrated and tested in accordance with ANSI/AMCA 500-D-12 Figure 5.1 (see Figures 1 and 2)• Each ridge is lab proven to deliver a flow rate within 10% of the set point• Please consult factory for set-point ridges that are not labeled with a value

Adjustment:• Adjusting of the ABV can be conveniently done by sliding the set- point indicator on the face of the damper (see Figures 1 and 2)• No tools needed to adjust the set-point of the ABV• All lab-calibrated intervals represent the applicable CFM that will remain constant within +/- 10% of the set CFM

Operation:• All ABV models are easily reversible for use in both exhaust and supply applications (see Figures 3 and 4) NOTE: Airflow direction arrows on the product must be adhered to in order to assure proper operation• All ABV models are supplied with a patent pending Quick Connect Adapter Ring that allows the ABV to be quickly and easily installed in the field into square duct• All ABV models are also supplied with a removable rubber gasket- type seal around the circumference of the damper for a tight fit into rigid round duct NOTE: This gasket can be removed and switched to the opposite side for a supply application

Model Length (L)* Inner Diameter (ID)*

Outer Diameter (OD)*

Outer Diameter w/ Gasket (ODG)*

Adapter Plate Height (H)*

Adapter Plate Width (W)* Weight**

ABV-4 3.48" (88.55) 3.37" (85.6) 3.66" (92.96) 4.1" (104.14) 3.90" (99.06) 4.00" (99.32) 0.25 (.11)

ABV-5 3.72" (94.49) 3.37" (85.6) 4.81" (122.17) 5.02" (127.51) 4.91" (124.8) 4.91" (124.8) 0.43 (.20)

ABV-6 5.29" (134.27) 5.29" (134.28) 5.66" (143.76) 6.1" (154.94) 5.91" (150.2) 5.91" (150.2) 0.48 (.22)

NOTE: A ridge between two values may NOT necessarily be the average of the two.

Dimensional Data:

(4" and 5" set points shown)

(6" set points shown)

Figure 1

Figure 2

Figure 3 Figure 4


As part of our continuous improvement program, we reserve the right to make further improvements without notice.4


Submittal - Model ABV - 030118

Furnish and install as shown on plans and/or schedules Model ABV Automatic Balancing Valve by Automatic Airflow Balancing (AAB), Clearwater, FL. Unit shall respond to changes in duct pressure automatically without the need for power supply.

All units shall incorporate a hand-operated manual set-point adjustment feature that facilitates field adjustment of flow rate set point without the use of tools, and allows adjustment while the automatic balancing valve is installed. All set points shall operate within ±10% of airflow set point. Individual set points shall be laboratory calibrated and verified through testing in accordance with AMCA 500-D-12.

Each ABV shall be manufactured of reinforced thermoplastic resins and shall be classified per UL 2043 and must be labeled as such. Each unit shall be rated for use in air temperature ranging from 25°F to 150°F. All automatic balancing valves shall incorporate Steri-Balance™ antimicrobial agent to prevent organic growth. Each ABV shall utilize a hydraulic blade dampener to prohibit blade rattle. ABV valves shall be provided with a full circumference rubber gasket to provide tight seal when inserted in round duct, or for tight sealing when used in conjunction with an accompanying quick-connect adapter ring in square duct applications.

Features & Benefits:

Suggested Specifications:

1

2 3 4 5

6

7

1. Oil-filled, hermetically sealed bearings for silent blade operation2. Detachable adapter plate for square/ rectangular duct mounting (adapter plate can be moved to opposite side for supply applications)3. Reversible design allows for use in supply or exhaust applications (NOTE: Arrow must coincide with direction of airflow)4. Removable rubber gasket for tight seal in round rigid duct5. Anti-microbial agent Steri-Balance™ infused into plastic6. Tool-free set-point adjustment7. 20-24 (depending on model) individual set-points

6" Model shown.


As part of our continuous improvement program, we reserve the right to make further improvements without notice.5


Submittal - Model ABV - 030118

All ABV models can be supplied with a square or rectangular transition (-S/R model). This transition will allow for inserting into square/rectangular duct or sleeve. The S/R transition can be removed and flipped to the other side of the ABV using the quick adapter plate (in some cases, tabs and screws will be used in place of adapter plate due to space constraints).

ABV - S/R Transition:

Models: ABV-4-S/R 4" x 4" 8" x 4" 10" x 4" Other: _____x_____

ABV-5-S/R 6" x 4" 8" x 6" 10" x 8"

ABV-6-S/R 6" x 6" 8" x 8" 10" x 10"

4" Model with 6" x 6" transition shown.

ABV-4-S/R(Legs Turned Out)

ABV-4-S/R(Legs Turned In)

4" Model with 6" x 6" transition shown.

1"(25)

1"(25)

S/R Transitions:



As part of our continuous improvement program, we reserve the right to make further improvements without notice.6 Submittal - Model ABV - 030118

All ABV models can be supplied with a flanged Grille Mount Box. This box will allow for the insertion of a standard depth grille (see grille options on next page). The ABV can be flipped around for supply applications by removing the Quick Adapter Plate, turning the ABV around (so that the set points are on the opposite side) and re-attaching the adapter plate.

NOTE: Non-flanged Grille Boxes available. Please contact an AAB representative.

GM - Grille Mount Box:

Models: ABV-4 with Grille Mount Box

ABV-5 with Grille Mount Box



ABV-Model Sleeve Size Dimension A Dimension B Dimension C

ABV-4 6" x 6" (152 x 152) 7.20" (182.22) 3.44" (87.38) 5.75" (146.05)

ABV-5 6" x 6" (152 x 152) 7.20" (182.22) 3.72" (94.49) 5.75" (146.05)

ABV-4 8" x 8" (203 x 203) 9.20" (233.68) 3.44" (87.38) 7.75" (196.85)

ABV-5 8" x 8" (203 x 203) 9.20" (233.68) 3.72" (94.49) 7.75" (196.85)

ABV-6 8" x 8" (203 x 203) 9.20" (233.68) 5.22" (132.59) 7.75" (196.85)

ABV-4 10" x 10" (254 x 254) 11.20" (284.48) 3.44" (87.38) 9.75" (247.65)

ABV-5 10" x 10" (254 x 254) 11.20" (284.48) 3.72" (94.49) 9.75" (247.65)

ABV-6 10" x 10" (254 x 254) 11.20" (284.48) 5.22" (132.59) 9.75" (247.65)

ABV-4 12" x 12" (305 x 305) 13.20" (335.28) 3.44" (87.38) 11.75" (298.45)

ABV-5 12" x 12" (305 x 305) 13.20" (335.28) 3.72" (94.49) 11.75" (298.45)

ABV-6 12" x 12" (305 x 305) 13.20" (335.28) 5.22" (132.59) 11.75" (298.45)

Dimensions shown in inches, parentheses () indicate millimeters.

1.50".75"

DIM A

DIM B

DIM C

Note: Common Grille/Sleeve sizes shown. Contact AAB for sizes not shown.

Box Size (Grille Opening)_____" Width x _____" Height




All ABV models can be supplied with a UL 555 rated fire damper as a UL Rated and Approved assembly. This assembly will include an ABV, flanged sleeve, fire damper and optional grille (see grille options within this submittal). The ABV can be flipped around for supply applications and re-secured using supplied tabs or adapter plate (depending on the size). This assembly must be installed per the fire damper manufacturer’s installation instructions.

NOTE: Non-flanged Grille Boxes available. Please contact an AAB representative.

ABV and Fire Damper in UL Rated Assembly:

Models: ABV-4 with Fire Damper Assembly

ABV-5 with Fire Damper Assembly

ABV-6 with Fire Damper Assembly

ABV-4 with UL Fire Damper Assembly:

ABV-Model Sleeve Size Dimension A Dimension B Dimension C¹

ABV-4 4" x 4" (102 x 102) 5.29" (134.37) SQ 8.58" (217.88) 3.95" (100.23) SQ

ABV-4 6" x 4" (152 x 102) 7.29" (185.17) x 5.29" (134.37) 8.58" (217.88) 5.95" (151.13) x 3.95" (100.23)

ABV-4 6" x 6" (152 x 152) 7.29" (185.17) SQ 8.58" (217.88) 5.95" (151.13) SQ

ABV-5 6" x 6" (152 x 152) 7.29" (185.17) SQ 8.86" (224.99) 5.95" (151.13) SQ

ABV-6 6" x 6" (152 x 152) 7.29" (185.17) SQ 10.36" (263.09) 5.95" (151.13) SQ

ABV-4 8" x 6" (203 x 152) 9.29" (235.97) x 7.29" (185.17) 8.58" (217.88) 7.95" (201.93) x 5.95" (151.13)

ABV-5 8" x 6" (203 x 152) 9.29" (235.97) x 7.29" (185.17) 8.86" (224.99) 7.95" (201.93) x 5.95" (151.13)

ABV-6 8" x 6" (203 x 152) 9.29" (235.97) x 7.29" (185.17) 10.36" (263.09) 7.95" (201.93) x 5.95" (151.13)

ABV-4 8" x 8" (203 x 203) 9.29" (235.97) SQ 8.58" (217.88) 7.95" (201.93) SQ

ABV-5 8" x 8" (203 x 203) 9.29" (235.97) SQ 8.86" (224.99) 7.95" (201.93) SQ

ABV-6 8" x 8" (203 x 203) 9.29" (235.97) SQ 10.36" (263.09) 7.95" (201.93) SQ

Dimensions shown in inches, parentheses () indicate millimeters. NOTE: Common Sleeve sizes shown. Contact AAB for sizes not shown.

¹Opening for ABV and Fire Damper assembly should be framed larger than these listed dimensions (see manufacturer’s installation instructions).

Options:

Fire Damper:

Dynamic Fire Damper (standard for models 6"x 6" or larger)

Horizontal* Vertical

Static Fire Damper (standard for models 6”x 6” or smaller)

Horizontal* Vertical

Sleeve:

Flanged (standard)

No Flange

Special Notes:

R38089R8218ABV

S/R Transition(tab or adapterplate depends on size)

FlangedSleeve

Slimline FireDamper

Grille (optional)

• *If installing horizontally, the ABV must be below the fire damper within the assembly.• ABV-4 model shown above with 4" x 4" static fire damper and grille box.

DIM A

.75" (19)

DIM B

DIM C




All ABV models can be supplied with a UL 263 rated wood truss ceiling radiation damper and boot assembly. This assembly will in-clude an ABV in the supply or exhaust orientation, un-insulated 90 degree or straight sheet metal boot, Warnock-Hersey approved wood truss ceiling radiation damper and optional grille (see grille options within this submittal). The ABV is bi-directional and can always be flipped around from supply to exhaust applications, or vice versa, and re-secured within the neck of the sheet metal boot.See next page for a 90 degree insulated boot assembly.This assembly must be installed per the ceiling radiation damper manufacturer’s installation instructions.

ABV and Wood Truss Ceiling Radiation in Rated Boot Assembly:

NOTE: Wood truss CRD boots typically supplies with flanges for boot rail installation. Non-flanged wood truss CRD boots are available. Please contact AAB representative.

ABV Models: ABV-4

ABV-5

ABV-6

Application: Supply

Exhaust

ABV-6 with Wood Truss Ceiling RadiationDamper Boot Assembly:

See NCA Manufacturing (www.NCAMfg.com) Submittals for dimensionalinformation and approved ceiling designs on below models:

WT Ceiling Radiation DamperBoot Models:

CDH-S/R-90-F (90 degree un-insulated boot with boot rail flanges)

CDH-S/R-90 (90 degree un-insulated boot without boot rail flanges)

CDH-S/R-ST-F (Straight un-insulated boot with boot rail flanges)

CDH-S/R-ST (Straight un-insulated boot without boot rail flanges)

NOTE: 10x6x6 CDH-S/R-90-F with 6" ABV-6 Shown in thesupply orientation. If in the exhaust orientation, the setpoint

ridge will be accessible from grille opening.NOTE: Width and Height dimensions are the grille opening andcan be interchanged (i.e. WxH is same as HxW).

Boot/Damper Size:_____" width x _____" height x _____" diameter

LISTED SIZE W x H

D–1/8" (3)

2" (51)

2-1/2" (64)

1/2" (13)

1" (25) 1" (25)

CDH-S/R-ST- F

Varies - See Submittal


LISTED SIZE W x H

Varies - See Submittal2"

D-1/8" (3)

6"

2-½"

1" ½"

CDH-S/R-90-F


LISTED SIZE W x H

Varies - See Submittal2"

D-1/8" (3)

6"

2-½"

1" ½"

CDH-S/R-90-F




All ABV models can be supplied with a UL 263 rated wood truss ceiling radiation damper and boot assembly. This assembly will in-clude an ABV in the supply or exhaust orientation, insulated 90 degree sheet metal boot, Warnock-Hersey approved wood truss ceiling radiation damper and optional grille (see grille options within this submittal). The ABV is bi-directional and can always be flipped around from supply to exhaust applications, or vice versa, and re-secured within the neck of the sheet metal boot.See previous page for a 90 degree un-insulated boot assembly.This assembly must be installed per the ceiling radiation damper manufacturer’s installation instructions.

ABV and Wood Truss Ceiling Radiation in Rated Boot Assembly:

NOTE: This insulated wood truss ceiling radiation damper damper boot will be supplied with flanges for boot rail installation only.

ABV Models: ABV-4

ABV-5

ABV-6

Application: Supply

Exhaust

ABV-6 with Insulated Wood Truss Ceiling Radiation Damper Boot Assembly:

See NCA Manufacturing (www.NCAMfg.com) Submittals for dimensionalinformation and approved ceiling designs on below models:

WT Ceiling Radiation DamperBoot Models:

CDH-S/R-90-IB (90 degree insulated boot with boot rail flanges)

NOTE: 6x10x6 CDH-S/R-90-IB with 6” ABV-6 Shown inthe supply orientation. If in the exhaust orientation, theset-point ridge will be accessible from grille opening.

NOTE: Width and Height dimensions are the grille opening andcan be interchanged (i.e. WxH is same as HxW).

Boot/Damper Size:_____" width x _____" height x _____" diameter

CDH-S/R-90-I B


LISTED SIZE W x H

3-1/2"(89)

LISTED SIZE + 3" (76)

D-1/8" (3)

2-1/2" (64)

1/2" (13) 1" (25)

1" (25)

W H




Grille Options:

Standard Finish 01 White

Optional Finish (no extra charge)

24 Mill Finish

Optional Finish (extra charge)

02 Satin Silver

03 Black

28 Custom Color (setup charge)



02 Satin Silver

03 Black


Listed Size + 2

.666

Listed Size

1145

32

Listed Size - 38

Face View (RH-1 Model)

MODEL: RH-1 (Return Grille - Surface Mount - Roll Formed Aluminum)

58

GASKET

GASKET

114

112

532

Listed Size*+ 2

.6661 14

Listed Size*- 38

Ø 316

Mounting Holes(Countersunk)

58

Face View (SRH-1 Model)

MODEL: SRH-1 (Return Grille - Surface Mount - Roll Formed Steel)

114

532

Listed Size*+ 2

.6661 14

Listed Size*- 14

Face View (RHE-1 Model)

Mounting Holes(Countersunk)

58

MODEL: RHE-1 (Return Grille - Surface Mount - Extruded Aluminum)

Duct Size = Listed Size

Listed Size - 14

1 14

532

1 38

Listed Size +1 34

58

Face View

½ x ½ x ½ Cube Core

MODEL: CC5-1 (Sidewall/Ceiling Return Grille - Surface Mount - Extruded Aluminum)

½ x ½ x ½Cube Core



24 Mill Finish


02 Satin Silver

03 Black




24 Mill Finish


02 Satin Silver

03 Black

04 Clear Anondized





Grille Options:

Mounting Holes3/16 Diameter(Countersunk)

916

.666

1 14

Listed Size

134

Listed Size - 12

Listed Size + 2

532 Front View (H4002-1 Model)

Horizontal Blades


916

1 14

Listed Size

134

Listed Size - 12

Listed Size + 2

532 Front View (V4002-1 Model)

Vertical Blades

.666

.666532 1

14

Listed Size - 12

Listed Size

178

Listed Size + 2

916


Face View

.666532 1

14

Listed Size - 12

Listed Size

178

Listed Size + 2

916


Face View



24 Mill Finish


02 Satin Silver

03 Black




24 Mill Finish


02 Satin Silver

03 Black




24 Mill Finish


02 Satin Silver

03 Black




24 Mill Finish


02 Satin Silver

03 Black


tag: engineer: project: contractor: location: architect ... · calibrated and tested in accordance...

Documents